AP DF2 DR2 DT2 DX2 DL2 DM3 DS2 MA MB MG MF2 MR2 MT2 MX2 ML2 MM3 MS2 TR Conveyor System DT2 Description 315 mm width thermoplastic belt with aluminium frame conveyor system Examples of application industries Personal Products, Pharmaceutical & Chemical Industry, Automotive & Machined Parts Industry, Food & Packaging Industry, Electrical & Electronic Industry, Paper Converting Industry and Optical Industry Technical characteristics Max Product * DG With Bend Without Bend 315 mm 45 mm 3.80 kg/m 1400N 1500N 30 kg DB Chain Width Chain Pitch Chain Chain Maximum Working Tension DT2-1 MM IM TL SE SD DA Total Load* 300 Kg Working Temperature* -10 C to 60 c Max Conveyor Length* 30m Max Speed* 50 m/min Drive Unit Capacity 1500 N Item Width* <500 mm * Actual limit may vary according to conveyor layout and applica on. * Maximum total off 90 bends in one conveyor.
Chains MT2 Plastic Curve Belt 340 31515 59 45-8.5mm belt gap. - Suitable for conveyor configuration with incline/decline up to 5. - Accumulation possible. MT2 ST CP 5 19.0 kg/roll 5m/roll Plastic Straight Belt 340 315 15 59 45-0mm belt gap. - Suitable for conveyor configuration with incline/decline up to 5. - Accumulation possible. MT2 ZG CP 5 20.6 kg/roll 5m/roll Plastic Cleated Belt 89 340 316 15 59 1 45 5 - Required for vertical or steep inclined / declined conveyor. - Accumulation not possible. - Not suitable to be use with Combined and Catenary Drive. - Please specify pitch between cleat for ordering (eg. MT2 ST CC 3x15P 3p = Every 3rd link to be cleated). **Please consult MODU representataive for actual Chain weight. MT2 ST CC 3-3m/roll DT2-2
AP 5.5 TR Side Guard L-R 5 MT2 CLP G-5 MG MF2 MR2 MT2 MX2 ML2 MM3 MS2 5.5 5 1.kg/pack 50pcs/pkt Chain Accessories MT2 Lubricant For Chain MA SL 0.35 kg 1 pc MT2 PC 0.12kg 10pcs/pkt Silicone-based lubricant, 400ml 0.0kg 10pcs/pkt DT2-3 MM IM TL MT2 BL SE SD DA DB DG Belt Lock DF2 DR2 DT2 DX2 DL2 DM3 DS2 MA MB Chain Pin
MS2 MS2 Drive Units DT2 Guideline For Drive Units Gearmotor type (Motovario) M40 = NMRV 040 M50 = NMRV 050 Transfer Device NIL = Basic Unit TR = Free Roller DR = Driven Roller Gearmotor size (SEW) S20 = WA20 S30 = WA 30 S3 = SA3 S4 = SA4 Gearmotor position: L or R D: Front Drive Clutch T: Combined Drive NIL = Basic Unit C: Catenary Drive C = With Clutch S: Suspended Drive DT2 DD L S20 TR C I: Intermediate Drive Front direct drive unit, motor on left W: Wheel Bend Drive side for 0.55kW SEW geared motor, with Free Roller and Clutch. eg. Code for Basic unit; Motor Orientation Guideline LEFT RIGHT * Drive comes wthout gearmotor, Please refer TR-13 for gear motor options. DT2 DT R M50 => Combined drive unit, motor on right side for Motovario NMRV 050 geared motor. Front Drive Unit 320 359 144 DT2 DD R/L S/M 9.4 kg 1 unit Effective track length: 0.8m Traction force: 1500N - Connecting strip and set screw included. Note: - Refer TR15 for chain effective track length calculation. Idler End 320 359 144 DT2 IE 320 8.3 kg 1 unit Effective track length: 0.8m - Connecting strip and set screw included. Note: - Refer TR15 for chain effective track length calculation. DT2-4
AP TR Conveyor Beam DT2 DT2 CB 2.4 18.5 kg 2.4 m Accessories DT2 Slide Rail 9 22 MA2 SR 25 MA2 SR 25A HDPE Anti-Static Pure Grey 2.8 kg/roll 2.8 kg/roll MA2 SR 25U UHMW-PE Semi-Transparent 3.5 kg/roll Slide Rail 14 6 MS SR 25 HDPE Pure 1.2 kg/roll MS SR 25A Anti-Static Grey 1.2 kg/roll MS SR 25U UHMW-PE Semi-Transparent 2. kg/roll MS SR 25P PVDF Natural white 2. kg/roll Connecting Strip M8 61 5 DA CS 61X140 4.5 kg 10 pcs/pkt - 8 pcs M8 set screw included. DG 140 MB DF2 DR2 DT2 DX2 DL2 DM3 DS2 MA 104 MG MF2 MR2 MT2 MX2 ML2 MM3 MS2 359 Grey 1.5 kg/roll MB SC 25P PVC Light Grey 1.3 kg/roll DA TPE SD MB SC 25T DT2-5 MM IM TL SE 16.4 DB T-Slot Cover
Rivet Screw MA RS 6.5 0.02 kg 50 pcs/pkt MA RR 3 0.4 kg 50 pcs/pkt : Brass Nickel plated (3mm) Slide Rail Assembling Tool MT2 SRA 0.02 kg Slide Rail Cutter 1 pc MA SC 0.5 kg 1 pc Chain Installation Section 363 300 104 DT2 CIS 300 4.9 kg 1 Unit - Connecting strip and set screw included. DT2-6