MATERIAL HANDLING AND AIR TOOLS Pricing Effective Through April, 2008

Feb. 11-14, 2008, at the Mandalay Bay Convention Center in Las Vegas MATERIAL HANDLING AND AIR TOOLS Pricing Effective Through April, 2008 jettools.com www.therentalshow.com Wiltontool.com

AIR TOOLS - New Ergo Grip Impact Wrenches Ergonomic Grip for increased operator comfort Multiple torque setting available with easy to use dial on back of impact wrench Heavy duty ball bearing construction Rotating air inlet keeps air hose twist free Low noise volume Super light weight composite design 120 00 No. JSM-4341 Square Drive (IN) 54 00 No. JSM-5130 Belt Sander 100 00 No. JSM-6100 Belt (WxL/IN) Ergo Grip Die Grinders Ergonomic grip for operator comfort Built in air regulator for precise speed control Equipped with a safety throttle lock Heavy duty ball bearing construction Rotating air inlet keeps air Horse Power (HP) Bolt (IN) SpeeD Noise level (db) Anvil Retainer Type Pressure Horse Power (HP) Max Torque (FT/LBS) Hose (ID/IN) Pressure (in) weight (LBS) Inlet (NPT/IN) weight (LBS) JSM-5130 1/2 20,000 90 1/4 3/8 7-2/5 1-1/2 140.00 54.00 JSM-5430 1/2 4,000 90 1/4 3/8 8-3/5 2 178.00 69.00 JSM-5130L 1/2 20,000 90 1/4 3/8 13-7/10 3 165.00 64.00 JSM-5252 1/4 20,000 90 1/4 3/8 6-1/4 1 145.00 56.00 (LBS) JSM-4140 3/8 1/2 RING 200 9000 2-3/4 171.00 120.00 JSM-4341 1/2 1/2 RING 250 9000 2-3/4 171.00 120.00 JSM-4340 1/2 3/4 RING 600 7000 5-1/2 145.00 102.00 Ergonomic Handle design Throttle features safety lock switch Built in air swivel keeps air hose twist free Rear exhaust directs air away from work Equipped with exhaust silencer for noise reduction Built in regulator for positive speed control JSM-6100 3/8 x 13 80 1/2 18,000 90 1-7/8 143.00 100.00 58 00 No. JSM-3330 Ergo Grip Ratchets Heavy duty ball and needle bearing construction Full gear cage Ergonomic grip Built in air regulator for precise control Rear exhaust Low operating volume Swiveling air inlet keeps air hose tangle free Square Drive (IN) Bolt (IN) Anvil Retainer Type Maximum Torque (FT/LBS) (LBS) JSM-3330 3/8 1/2 Ball 50 150 2-5/8 83.00 58.00 JSM-3430 1/2 1/2 Ball 50 150 2-5/8 83.00 58.00 Drills 80 00 No. JSM-7572 Reversible Ergo Grip Ball bearing and needle bearing construction for more efficient performance Muffled Handle Exhaust for quiet operation Pistol grip models have variable speed triggers for positive control All models equipped with Jacobs chucks 1/2" model has an auxiliary side handle for better control Chuck (IN) Spindle Thread (IN/TPI) Horse Power (HP) (LBS) JSM-7572 3/8 3/8-24 1/2 1800 3 114.00 80.00 JSM-7472 1/2 3/8-24 1/2 800 3-3/4 137.00 96.00 72 00 Ergo Grip Screwdrivers Ergonomic handle design Ball and needle bearing construction for more efficent performance Muffled handle exhaust for quiet operation All pistol grip models have variable speed triggers for positive control No. JSM-8272 Chuck Horse Chuck type (IN) Power (HP) Torque (FT/LBS) (LBS) JSM-8272 Adjustable 1/4 1/2 1800 45-115 2-3/4 77.00 72.00 JSM-8372 Adjustable 1/4 1/2 800 45-145 3 98.00 84.00 JSM-8672 Positive 1/4 1/2 800 145 3-1/2 91.00 82.00 JSM-8472 Positive 1/4 1/2 1800 115 2-1/2 80.00 70.00 STEEL DEALS - Pricing Effective Through April, 2008

Die Grinders / Impact Wrenches - AIR TOOLS Die Grinders Lightweight yet powerful and compact design Heavy-duty ball bearing construction for vibration-free performance Durable precision machined and hardened steel gears 13 00 3/8" Butterfly Impact Wrench Built-in air regulator for positive speed and torque control Front and/or rear bumper guards 21 00 No. JNS-5030 No. JNS-7033 Description JNS-5030 3/8" Butterfly Impact Wrench 75 FT LBS Max Torque 28.00 21.00 Description JNS-7033 1/4" Die Grinder 1/4HP 22,000 RPM 18.00 13.00 JNS-7034 1/4" Angle Die Grinder 1/4HP 20,000 RPM 37.00 28.00 JNS-7033E 1/4" Die Grinder 1/4HP 22,000 RPM 6" Anvil 41.00 31.00 JNS-7032 1/4" Die Grinder 1/4HP 25,000 RPM 26.00 20.00 3/8" Ratchet Wrench Steel spring ball retainers for rapid socket changing Variable speed lever throttle for better speed control Hardened steel gears for long tool life Quick Release Riveting Hammer Hardened Steel barrel and piston for less wear and longer life Lightweight aluminum pistol grip housing with comfort grip Built in air regulator Quick release chisel holder 20 00 No. JNS-2060 22 00 No. JNS-5052 JNS-5052 Description 3/8" Ratchet Wrench 150 RPM 150 FT LBS Max Torque 29.00 22.00 Stroke Bore Blows Per Pressure Inlet Hose (IN) (IN) Minute (NPT/IN) (ID/IN) (IN) (LBS) JNS-2060 2-5/8 3/4 5000 90 1/4 3/8 5-1/4 3 27.00 20.00 Grinder Chucks Drills with Keyless Throttle features lever lock for safety Builit in air regulator Hardened and beveled steel gears for longer lift Ball bearing and needle bearing construction for more efficient performance Muffled handle exhaust for quiet operation All pistol grip models have variable speed triggers for positive control 60 00 No. JNS-185 32 00 No. JNS-4031KL Description JNS-4041KL 1/2" Reversible Drill 1/2HP w/ Keyless Chuck 65.00 49.00 JNS-4031KL 3/8" Reversible Drill 1/2HP w/ Keyless Chuck 42.00 32.00 Description JNS-185 4-1/2"x5/8" Grinder 1/2HP 11,000 RPM 145.00 60.00 jettools.com wiltontool.com 3

AIR TOOLS - Drills / Ratchet Wrenches / Screwdrivers Die Grinders Lightweight yet powerful and compact design Heavy-duty ball bearing construction for vibrationfree performance Durable precision machined and hardened steel gears 20 00 No. JSM-512 Model Collet Horsepower (HP) Each JSM-501 JSM-501 1/4 1/4 22,000 3 41.00 29.00 JSM-512 JSM-512 1/4 1/4 22,000 3 29.00 20.00 JSM-512F JSM-512F 1/4 1/4 22,000 2-1/2 58.00 41.00 JSM-522 JSM-522 1/4 1/4 22,000 2 53.00 37.00 JSM-532 JSM-532 1/4 1/4 25,000 2 34.00 24.00 JSM-532E JSM-532E 1/4 1/4 25,000 4 58.00 41.00 JSM-542 JSM-542 1/4 1/4 20,000 2 122.00 85.00 526201 MG-1B 1/4 1/2 20,000 1-1/4 132.00 106.00 See page 192 of the 2006 Industrial Catalog, No. 900894, for more information. Built-in air regulator for positive speed and torque control Front and/or rear bumper guards 39 00 No. JSM-403 Square Drive Impact Wrenches Die Grinder Kits JSM-522K kit includes: 1/4" Angle Head Die Grinder, (10 Each) Mounted Points, 1/8" Collet, (2 Each) Spanner Wrenches and Blow Mold Case JSM-512K kit includes: 1/4" Die Grinder, (10 Each) Mounted Points, 1/8" Collet, (2 Each) Spanner Wrenches and Blow Mold Case 29 00 Bolt No. JSM-512K Anvil Retainer Type Max Torque (ft./lbs.) Each JSG-0716N 1/2 5-8 Ring 280 7,000 5-1/4 89.00 62.00 JSG-0717SH 1/2 5/8 Ring 380 7,000 6 114.00 80.00 JSG-0740 3/4 1 Ring/Hole 480 4,500 10-1/2 145.00 102.00 JSG-0750 3/4 1 Ring/Hole 500 4,500 10-1/2 180.00 126.00 JSG-0751SH 3/4 1 Ring/Hole 530 5,000 11 228.00 160.00 JSG-0775 3/8 3/8 Ring 75 10,000 2 55.00 39.00 JSM-401 3/8 3/8 Ring 75 10,000 2-1/2 43.00 30.00 JSM-403 1/2 5/8 Ring 250 7,000 5-1/4 5500 39.00 See page 193 of the 2006 Industrial Catalog, No. 900894, for more information. Description Each JSM-512K Die Grinder Kit 5 37.00 29.00 JSM-522K Die Grinder Kit 5 63.00 47.00 See page 192 of the 2006 Industrial Catalog, No. 900894, for more information. Drills Ball bearing and needle bearing construction for more efficient performance Muffled handle exhaust for quiet operation All pistol grip models have variable speed triggers for positive control 36 00 No. JSM-706 Chuck Spindle Thread (in./tpi) Horse power (HP) Each Reversible JSM-701 No 3/8 3/8-24 1/2 2,200 3 57.00 40.00 JSM-702 No 3/8 3/8-24 1/2 2,000 4 80.00 56.00 JSM-703 No 1/2 3/8-24 1/2 500 5 86.00 60.00 JSM-704 Yes 1/2 3/8-24 1/2 800 5 86.00 60.00 JSM-705 Yes 3/8 3/8-24 1/2 1,800 4 54.00 38.00 JSM-706 No 3/8 3/8-24 1/2 2,600 3 51.00 36.00 JSM-709 No 3/8 3/8-24 1/3 1,900 4 86.00 60.00 JSM-709R Yes 3/8 3/8-24 1/2 1,900 5 99.00 69.00 JSM-710 No 3/8 3/8-24 1/2 2,600 3 57.00 40.00 JSM-720 No 3/8 3/8-24 3/4 2,600 3 126.00 88.00 JSM-724 Yes 1/2 3/8-24 1/2 800 5 108.00 76.00 JSM-725 Yes 3/8 3/8-24 1/2 1,800 4 83.00 58.00 See page 194 of the 2006 Industrial Catalog, No. 900894, for more information. Screwdrivers Ball and needle bearing construction for more efficient performance Muffled handle exhaust for quiet operation All pistol grip models have variable speed triggers for positive control 50 00 No. JSM-804 Horse power (HP) Each Chuck Type* Chuck Torque (in./lbs.) JSM-802 A 1/4 1/2 1,800 45 / 115 4 77.00 54.00 JSM-804 P 1/4 1/2 1,800 115 4 72.00 50.00 JSM-806 P 1/4 1/2 800 145 4 83.00 58.00 JSM-812 A 1/4 1/2 1,800 45 / 115 4 94.00 66.00 JSM-842 A 1/4 1/2 1,800 45 / 115 4 82.00 57.00 JSM-843 A 1/4 1/2 800 45 / 145 4 103.00 72.00 JSM-882 A 1/4 1/2 1,800 45 / 115 4 156.00 109.00 See page 195 of the 2006 Industrial Catalog, No. 900894, for more information. JSG-0717SHK kit includes: 1/2" Impact Wrench, 3" Extension Bar, Hex Key Wrench and Blow Mold Case, Impact Sockets: 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1" JSM-403K kit includes: 1/2" Impact Wrench, 5" Extension Bar, Hex Key Wrench and Blow Mold 60 00 Impact Wrench Kits No. JSM-403K Description Max. Torque Each JSM-403K 1/2" Impact Wrench Kit 250 5 76.00 60.00 JSG-0717SHK 1/2" Impact Wrench Kit 380 12 145.00 100.00 See page 193 of the 2006 Industrial Catalog, No. 900894, for more information. STEEL DEALS - Pricing Effective Through April, 2008

Miscellaneous - AIR TOOLS Steel spring ball retainers for rapid socket changing Variable speed lever throttle for better speed control Hardened steel gears for long tool life 30 00 No. JSM-30 Square Drive Kit includes: Ratchet Wrench Kit 3/8" Ratchet Wrench, 3" Extension Bar, Universal Joint, Screwdriver Adapter, 3 Screwdriver Bits and Blow Mold Case 53 00 No. JSM-30K Ratchet Wrenches Bolt Anvil Retainer Type Max Torque (ft./lbs.) Each JSG-0719 1/4 1/4 Ball 18 240 2 48.00 34.00 JSM-30 3/8 3/8 Ball 50 150 4 43.00 30.00 JSM-31 1/2 3/8 Ball 50 150 4 43.00 30.00 JSG-0735 1/2 1/2 Ball 90 150 5 116.00 81.00 See page 196 of the 2006 Industrial Catalog, No. 900894, for more information. Palm Hammer No trigger, easy to operate Comfortable palm grip design Replaces a wide variety of hammers and mallets 80 00 No. JSG-0126 Press. Maximum Press. Consump. (CFM) Inlet (NPT/in.) Hose (ID/in.) Each JSG-0126 90 115 4 1/4 3/8 4 118.00 80.00 See page 205 of the 2006 Industrial Catalog, No. 900894, for more information. Palm Nailer No trigger, easy to operate Able to drive a wide variety of nails Designed for accessibility in confined areas 88 00 No. JSG-0125 Press. Maximum Press. Consump. (CFM) Inlet (NPT/in.) Hose (ID/in.) Each JSG-0125 90 115 4 1/4 3/8 4 125.00 88.00 See page 205 of the 2006 Industrial Catalog, No. 900894, for more information. Description Each JSM-30K 3/8" Ratchet Wrench Kit 6 69.00 53.00 See page 196 of the 2006 Industrial Catalog, No. 900894, for more information. 16 00 No. JSG-0101R Riveting Hammers Special heat treated hardened steel barrel and piston for longer tool life Built in tease trigger and air regulator for precise control Standard spring retainer for quick tool changes Stroke Bore Blows Shank (IN) (IN) Per Minute Pressure (LBS) JSG-0101R 1-5/8 3/4 5000.401 Parker 90 2-1/4 23.00 16.00 JSG-0204R 2-5/8 3/4 3200.401 Parker 90 3-1/4 26.00 18.00 JSG-0304R 3-1/2 3/4 2000.401 Parker 90 3-1/2 30.00 21.00 See page 197 of the 2006 Industrial Catalog, No. 900894, for more information. Sanders and Polishers Heavy-duty, balanced, ball bearing construction Built-in regulator for positive speed control on models JSG-0402, JSG-0404, and JSG-0420 Dynamic counterweight vibration isolators for low vibration sanding 25 00 No. JSG-0402 Pad Spindle Thread (in./tpi) Horsepower (HP) Press. JSG-0402 3, 4-1/2, 5-1/2 7/16 / 20 1/2 18,000 90 6 35.00 25.00 Round JSG-0404 6 Round 5/16 / 24 1/2 10,000 90 4 45.00 32.00 JSG-0416 3-2/3 x 6-1/2-1/2 8,000 90 6 51.00 36.00 JSG-0420 6 Round 5/16 / 24 1/2 10,000 90 6 51.00 36.00 JSG-0430 2-1/2 x 15-3/4 - - 3,000 90 8 100.00 70.00 JSG-0470 7 Round 5/8 / 11 1 4,500 90 6 124.00 87.00 JSG-0472 7 Round 5/8 / 11 1 2,500 90 6 129.00 90.00 JSG-9613 4 x 4-3/8-1 20,000 90 5 84.00 59.00 JSM-603-5 5 Round 5/16 / 24 1/2 10,000 90 4 103.00 72.00 JSM-603-6 6 Round 5/16 / 24 1/2 10,000 90 4 103.00 72.00 JSM-603V-5 5 Round 5/16 / 24 1/2 10,000 90 5 113.00 79.00 See page 198 of the 2006 Industrial Catalog, No. 900894, for more information. jettools.com wiltontool.com 5

AIR TOOLS - Miscellaneous Heavy-duty ball bearing construction for vibration-free performance Durable precision machined and hardened steel gears Rugged aluminum alloy housing with steel wheel guards pressure 90 PSI 186 00 Angle Grinders Heat-treated barrels and pistons for extended tool life Lever lock retainer on Model JSG-9121 69 00 No. JSG-9121 Needle Scalers/Flux Chippers No. JSG-0522 Wheel Spindle Thread (in.-tpi) Horsepower (HP) Consump. (CFM) JSG-0522 7 x 7/8 5/8-11 1 7,000 7 10 265.00 186.00 JSM-619 4 x 5/8 3/8-24 1/2 11,000 4 5 120.00 84.00 JSM-6195B 5 x 7/8 5/8-11 1/2 11,000 4 5 125.00 88.00 Mini Pneumatic Belt Sanders Rear exhaust directs air away from work Equipped with exhaust silencer for noise reduction Built-in regulator for positive speed control 99 00 No. JSM-610 Blows Per Minute Stroke Heavy-duty pistol grip design Comes standard with (14) 4mm needles of Needles (mm) Pistol Grip Needle Scaler Each of Needles Press. JSG-9121 4,600 1-1/8 - - 90 4 99.00 69.00 JSG-9121NS 4,600 1-1/8 19 3 90 7 113.00 79.00 See page 200 of the 2006 Industrial Catalog, No. 900894, for more information. JSM-610 JSM-612 JSM-620 Belt 3/8 x 13 1/2 x 24 3/4 x 20-1/2 Noise Level (db) Horsepower (HP) Press. Each 80.37 16,000 90 3 141.00 99.00 80.37 16,000 90 3 147.00 103.00 82.45 16,000 90 4 213.00 149.00 202 00 No. JSG-3328NS See page 199 of the 2006 Industrial Catalog, No. 900894, for more information. Flux Chippers Heat-treated barrels and pistons for extended tool life 85 00 No. F-25 Blows Per Minute Stroke of Needles of Needles (mm) Press. Consump. (CFM) F-25 4,000 7/8 90 4 5 121.00 85.00 F-25NS 4,000 7/8 19 3 90 4 6 165.00 116.00 Blows Per Minute Stroke of Needles of Needles (mm) Press. Each JSG-3328NS 4,500 5/8 27 or 14 3 or 4 90 8 288.00 202.00 See page 200 of the 2006 Industrial Catalog, No. 900894, for more information. See page 200 of the 2006 Industrial Catalog, No. 900894, for more information. STEEL DEALS - Pricing Effective Through April, 2008

Miscellaneous - AIR TOOLS Sheers Cuts metal up to 18 gauge thick (.048") Replaceable heavy-duty cutting jaws and blades Heavy-duty, ball bearing design for tough cutting jobs and extended tool life Body Saw Lightweight, slim design for cutting in confined areas Positive blade retention with adjustable blade guide to increase blade life and depth of cut 48 00 No. JSG-204 Metal (gauge) Consump. (CFM) Each Press. Inlet (NPT/in.) JSM-204 18 2,200 90 4 1/4 6 69.00 48.00 JSM-204S 18 2,200 90 4 1/4 3 69.00 48.00 See page 201 of the 2006 Industrial Catalog, No. 900894, for more information. 55 00 No. JSG-0822 Stroke Metal (gauge) Press. Consump. (CFM) Each JSG-0822 3/8 16 9,000 90 4 2 79.00 55.00 See page 202 of the 2006 Industrial Catalog, No. 900894, for more information. Utility Cut-Off Tools Able to cut through metal up to 3/4" thick Built-in speed regulator matches speed to job Spark guard rotates 360º for greater safety pressure 90v PSI 26 00 No. JSG-0516 Nibbler Balanced, lightweight design for ease in handling Cuts 18 gauge (.048") metal without edge distortion Lever throttle for slow speed starting jobs 45 00 No. JSM-213 Wheel Horsepower (HP) Consump. (CFM) JSG-0516 3 x 3/8 1/2 2,000 4 3 37.00 26.00 See page 201 of the 2006 Industrial Catalog, No. 900894, for more information. Metal (gauge) Press. Consump. (CFM) Inlet (NPT/in.) Each JSM-213 18 2,600 90 4 1/4 3 64.00 45.00 See page 202 of the 2006 Industrial Catalog, No. 900894, for more information. Punch Unique two-in-one metalworking tool 360º swivel head for versatile operation Crimps up to 14 gauge (.075") sheet steel or punches clean holes for welding applications 51 00 No. JSG-0692 Rear exhaust keeps air flow away from work Lightweight aluminum housing for less operator fatigue Standard with four files 69 00 File No. JSG-0825 Metal Cap y (gauge) Punch Diameter Press. Consump. (CFM) JSG-0692 14 3/16 90 4 5 73.00 51.00 See page 201 of the 2006 Industrial Catalog, No. 900894, for more information. Stroke Shank Press. Consump. (CFM) Each JSG-0825 1/8 1/4 3,700 90 4 3 98.00 69.00 See page 202 of the 2006 Industrial Catalog, No. 900894, for more information. jettools.com wiltontool.com 7

AIR TOOLS - Miscellaneous Continuous production capability Four nose pieces (3/32", 1/84", 5/32" and 3/16") to set blind rivets Quick-release air valve 57 00 No. JSG-0810 Riveter Press. Consump. (CFM) Inlet (NPT/in.) Hose (ID/in.) Each JSG-0810 70-100 1-4 1/4 3/8 6-1/4 3-1/2 82.00 57.00 135 00 No. 426238 /Water Hose Reel all steel construction for industrial application Durable powder coat paint finish Spring powered auto-rewind with multi-position ratchet Reel mounts on wall, floor or ceiling Non-snag rollers reduce hose wear 3/8" leak proof brass swivel See page 204 of the 2006 Industrial Catalog, No. 900894, for more information. Spray gun Industrial quality with dripless cup Cup tested to 800 pounds Handles all kinds of paint, lacquer, stains, enamel etc. May be used with external pressure tank one quart cup is Teflon -coated for easy clean out Spray nozzle and head made of brass; will not corrode 44 00 Hose ID/IN Hose (ft) Working Press. Hose Inlet (in) Hose Model Type 426238 AHR-50 Rubber 3/8 50 300 3/8 Dimension (LxWxH/in) 20-1/2 x 9 x 22 See page 213 of the 2006 Industrial Catalog, No. 900894, for more information. 151.00 135.00 No. JSG-1046 Press. Consump. (CFM) Inlet (NPT/in) Hose (ID/in) (in) (Lbs) JSG-1046 50 60 4 7 1/4 3/8 7 4 58.00 44.00 Touch-Up Spray Gun Professional quality for touchup spraying, edging, shading or precision detail painting Eight-ounce clamp type paint cup 75 00 Polypropylene /Water Hose Reel Lightweight polypropylene construction Spring powered auto-rewind with multi-position ratchet Reel mounts on wall or ceiling Non-snag rollers reduce hose wear 3' lead-in hose included No. 426237 34 00 No. TG-400 Press. Consump. (CFM) Inlet (NPT/in.) Hose (ID/in.) Each TG-400 70-100 1-4 1/4 3/8 5 42.00 34.00 See page 206 of the 2006 Industrial Catalog, No. 900894, for more information. Hose ID/IN Hose (ft) Working Press. Hose Inlet (in) Hose Model Type 426237 PHR-50 Rubber 3/8 50 300 3/8 Dimension (LxWxH/in) 18 x 9 x 18-1/2 See page 213 of the 2006 Industrial Catalog, No. 900894, for more information. 77.00 75.00 STEEL DEALS - Pricing Effective Through April, 2008

Accessories - AIR TOOLS Hose High performance, synthetic PVC blend 300 PSI working pressure Excellent weather and U.V. resistance 1/4" NPT threads 10 50 No. JAH-3825 1/4" NPT threads on 1/4" hose 3/8" NPT threads on 3/8" hose Handles up to 200 PSI of air pressure 5 00 No. JSA-225 Recoil Hose Description Each JAH-3825 3/8" x 25' Hose 5 11.00 10.50 JAH-3850 3/8" x 50' Hose 7 19.00 23.00 JAH-38100 3/8" x 100' Hose 20 37.00 33.00 Description Each JSA-225 1/4" x 25' Recoil Hose 1 6.00 5.00 JSA-250 1/4" x 50' Recoil Hose 2 9.00 7.00 JSA-325 3/8" x 25' Recoil Hose 2 10.00 8.00 See page 214 of the 2006 Industrial Catalog, No. 900894, for more information. See page 214 of the 2006 Industrial Catalog, No. 900894, for more information. Filter Regulator Lubricators filter and oiler feature shatterproof plastic bowls with protective metal cups The air filter removes solid particles and condensates moisture accompanying compressed air Micro-fog lubricator supplies lubricating oil to the pneumatic tool in proper proportion to the air consumption 16 00 No. JSB-1121 Filters Model Type* Connection Port (NPT/ in.) Maximum Temp. (F) Maximum Press. Each JSB-1121 JSB-1121 AF 1/4 150 150 2 24.00 16.00 JSB-1131 JSB-1131 AF 3/8 150 150 2 24.00 16.00 JSB-1141 JSB-1141 AF 1/2 150 150 2 24.00 16.00 Filter/Regulators Model Type* Connection Port (NPT/ in.) Maximum Temp. (F) Maximum Press. Each JSB-2021 JSB-2021 FR 1/4 150 150 3 44.00 30.00 JSB-2031 JSB-2031 FR 3/8 150 150 3 44.00 30.00 JSB-2041 JSB-2041 FR 1/2 150 150 3 44.00 30.00 Regulators Model Type* Connection Port (NPT/ in.) Maximum Temp. (F) Maximum Press. Each JSB-1221 JSB-1221 AR 1/4 150 150 2 25.00 18.00 JSB-1231 JSB-1231 AR 3/8 150 150 2 25.00 18.00 JSB-1241 JSB-1241 AR 1/2 150 150 2 25.00 18.00 Filter/Regulator/Lubricators Model Type* Connection Port (NPT/ in.) Maximum Temp. (F) Maximum Press. Each JSB-3021 JSB-3021 FRL 1/4 150 150 3 66.00 42.00 JSB-3031 JSB-3031 FRL 3/8 150 150 5 66.00 42.00 JSB-3041 JSB-3041 FRL 1/2 150 150 5 66.00 42.00 * FR Filter Regulator, AF Filter, FRL Filter Regulator Lubricator, AR Regulator See page 212 of the 2006 Industrial Catalog, No. 900894, for more information. jettools.com wiltontool.com 9

AIR TOOLS - Accessories Double Suction Cup Kit Aluminum back for added strength and durability Double suction pads for secure grip Standard with ratchet tie down for one person auto glass repair 67 00 No. JSM-910K For use with all air operated equipment Quickly connect an assortment of air powered tools 6 00 No. JSG-2008 5-Piece Quick Coupler Set Description Each JSG-2008 5-Piece Quick Coupler Set 1 8.00 6.00 See page 215 of the 2006 Industrial Catalog, No. 900894, for more information. 1/4" NPT threads 11 CFM tip 8 CFM point tip Blow Gun Description Each JSM-910K Double Suction Cup Kit 4 84.00 67.00 See page 206 of the 2006 Industrial Catalog, No. 900894, for more information. 4 00 No. JST-712 2 00 No. JTC-828Z Dual Head Tire Chuck Chrome-plated finish Ideal for hard to reach valves pressure can be delivered at various angles Description Each JST-712 Dual Head Tire Chuck 1 5.00 4.00 See page 216 of the 2006 Industrial Catalog, No. 900894, for more information. Dual Head Tire Chuck Chrome-plated finish Ideal for hard to reach valves pressure can be delivered at various angles Description Each JTC-828Z Tire Chuck 1 3.00 2.00 See page 216 of the 2006 Industrial Catalog, No. 900894, for more information. 3 00 No. JSG-1063 Description Each JSG-1063 Blow Gun 1 4.00 3.00 See page 216 of the 2006 Industrial Catalog, No. 900894, for more information. 9 00 Swivels Bidirectional 360º rotation air hose universal joint Keeps air hose straight and untwisted Increases maneuverability of air tool No. JAS-14 Description Each JAS-12 1/2" air Swivel 1 26.00 21.00 JAS-14 1/4" air Swivel 1 11.00 9.00 JAS-38 3/8" air Swivel 1 11.00 9.00 See page 216 of the 2006 Industrial Catalog, No. 900894, for more information. Mini Oiler Solid brass construction 1/4" NPT threads Automatic in-line oiler for small tools See-through reservoir shows when oil is needed 4 00 No. JG-301 Description Each JG-301 Mini Oiler 1 5.00 4.00 See page 215 of the 2006 Industrial Catalog, No. 900894, for more information. STEEL DEALS - Pricing Effective Through April, 2008

Industrial - AIR TOOLS Square Drive Impact Wrenches Unique pinless hammer provides for stability Distinctive clutch design generates maximum power Variable speed teasing throttle Built-in regulator Pistol grip style body Muffled handle exhaust 126 00 No. 505983 Square Drive Max Torque (ft./lbs.) Carton Pack Model 1/2" Square Drive Impact Wrenches 505983 J-1700P 1/2 407 6500 7 7 1 148.00 126.00 3/4" Square Drive Impact Wrenches 505972 J-2000P 3/4 550 5500 8-7/8 11 1 446.00 379.00 505973 J-2000PL 3/4 550 5500 13-7/8 12 1 457.00 388.00 505974 J-2000D 3/4 510 5500 12-3/16 13 1 502.00 427.00 1" Square Drive Impact Wrenches 505941 JET-1010 1 1250 4100 16-3/16 33 1 659.00 560.00 505942 JET-1010-E6 1 1250 4100 22-7/16 35 1 696.00 592.00 505976 J-3800P 1 1400 4700 11-1/16 23 2 772.00 656.00 505977 J-3800D 1 1400 4700 13 23 1 782.00 665.00 505980 J-4500D 1 1700 3700 18-1/8 34 1 998.00 848.00 1-1/2" Square Drive Impact Wrenches 505955 JET-5000 1-1/2 3400 3000 16 34 1 2,124.00 1,805.00 See page 207 of the 2006 Industrial Catalog, No. 900894, for more information. Heavy-Duty Industrial Horizontal Grinders Powerful motor for superior performance Torque drive speed governor regulating valve maintains constant speed control when grinding and prevents over-speed when free running Ball bearing construction Safety self-closing lever throttle 235 00 AG Ergo Grip Angle Grinders regulating governor maintains constant speed and torque control while grinding and prevents over-speed with free running Light weight composite body Wheel guard adjusts to 9 different positions without tools Vibration absorbing handle allows longer use without operator fatigue 187 00 No. 526340 No. 526205 Wheel Spindle Thread (TPI/in.) Horse- Power (HP) Model 526205 HG-2L 2 3/4-24.9 11,000 14-1/4 4 277.00 235.00 526207 HG-4L 4 5/8-11 1.3 7000 18-1/2 7 457.00 388.00 Wheel (Dia x Bore x Thk/In) Spindle Thread (IN/TPI) Horse power (HP) Press. Model 526340 AG-4S 4 x 5/8 x 1/4 3/8-24 3/4 10000 90 323.00 187.00 526345 AG-4.5S 4-1/2 x 5/8 x 1/4 5/8-11 3/4 10000 90 346.00 200.00 See page 209 of the 2006 Industrial Catalog, No. 900894, for more information. jettools.com wiltontool.com 11

AIR TOOLS - Industrial Drill Heavy-duty industrial quality 1/2" drill Teasing throttle Compact design 499 00 No. 556410 Clay/Trench Diggers Heavy-duty design Replaceable front head bushing Drop-forged cylinder Full control inside lever throttle 530 00 No. 550011 Pressure Consumption Inlet Hose Model (psi) (CFM) (NPT/in.) (ID/in.) 556410 RD-12 90 30 1/4 1/2 12-1/2 9 587.00 499.00 Ft / lbs per Blow (@90 PSI) Cnsmpt. (CFM) Inlet (NPT/ in.) Hose (ID/in.) Model 550010 CD-30-7/8 46 49 1/2 1/2 22 34 806.00 605.00 550011 CD-20-7/8 28 25 1/2 1/2 20-1/2 25 713.00 530.00 550012 CD-30-1 46 49 1/2 1/2 22 34 806.00 605.00 See page 208 of the 2006 Industrial Catalog, No. 900894, for more information. See page 209 of the 2006 Industrial Catalog, No. 900894, for more information. Sand Rammers Light to medium-duty applications Equipped with rubber butts 211 00 No. 556631 Rock Drills Latch type tooling retainer T-style handle, with rubber grips Forged steel parts Heavy-duty ratchet and pawl 440 00 No. 550020 Butt Dia. Bore & Stroke Model Type 556631 JET-00T 2 3/4 x 2 11 4 Bench 244.00 211.00 556632 JET-0T 2 7/8 x 2-1/2 16 6 Bench 278.00 240.00 556633 JET-1T 2-5/8 1 x 4 20 12 Bench 396.00 342.00 556634 JET-2T 3 1-1/4 x 5 44 20 Floor 517.00 447.00 556606 JET-06 5-3/4 1-1/2 x 5-1/2 49 37 Floor 713.00 617.00 See page 210 of the 2006 Industrial Catalog, No. 900894, for more information. Piston Diameter Piston Stroke Model Hex Shank Chuck Rotation 550020 RD-7 5/8 1-1/2 1-1/2 LEFT 300 616.00 440.00 550019 RD-15-7/8 7/8 x 3-1/4 1-1/4 1-1/4 RIGHT 350 889.00 725.00 550021 RD-30-7/8 7/8 x 3-1/4 1-3/4 1-3/4 LEFT 250 1,150.00 820.00 550024 RD-60-7/8 7/8 x 3-1/4 2-9/16 2-9/16 LEFT 200 1,405.00 1,100.00 550022 RD-60-1 1 x 4-1/4 2-9/16 2-9/16 LEFT 200 1,455.00 1,100.00 See page 208 of the 2006 Industrial Catalog, No. 900894, for more information. STEEL DEALS - Pricing Effective Through April, 2008

Industrial - AIR TOOLS Paving Breakers Large diameter, smooth stroke piston Full control throttle Replaceable front head bushing Four-bolt head-to-cylinder construction 635 00 No. 550075 Four Bolt Chipping Hammers Rubber coated trigger D-handle for extra strength and better grip Four-bolt handle design reduces handle breakage 285 00 No. 557702 Hex Shank SiZe Piston Diameter Piston Stroke Blows per MInute Pressure Model 550035 PB-30-1 1 x 4-1/4 1-3/4 3-3/8 1550 90 784.00 580.00 550075 JPB-60-1-1/8 1-1/8 x 6 2-1/4 5 1400 90 731.00 635.00 550076 JPB-60-1-1/4 1-1/4 x 6 2-1/4 5 1400 90 731.00 635.00 550077 JPB-90-1-1/8 1-1/8 x 6 2-5/8 6-1/2 1250 90 776.00 665.00 550078 JPB-90-1-1/4 1-1/4 x 6 2-5/8 6-1/2 1250 90 776.00 665.00 Shank Bushing Style Shank Bushing Stroke Bore Press. (Lbs.) Model 557702 FBCH-2R ROUND.680 2-1/2 1-1/8 90 15-5/8 19 373.00 285.00 557706 FBCH-2H HEX.580 2-1/2 1-1/8 90 15-5/8 19 373.00 285.00 557703 FBCH-3R ROUND.680 3 1-1/8 90 16-5/8 20 373.00 285.00 557707 FBCH-3H HEX.580 3 1-1/8 90 16-5/8 20 373.00 285.00 557704 FBCH-4R ROUND.680 4-1/2 1-1/8 90 18-1/2 22 376.00 285.00 See page 212 of the 2006 Industrial Catalog, No. 900894, for more information. See page 211 of the 2006 Industrial Catalog, No. 900894, for more information. 720 00 Rivet Busters Hard hitting, powerful hammers for cutting off bolt and rivet heads May be used for heavy-duty chipping and nail driving applications No. 550095K Castle Tooth Handle Chipping Hammers Ring valve type Drop-forged castle tooth style handle Heavy-duty hammer provides hardhitting powerful blows 245 00 No. 557901 Tooling Rivet Stroke Bore Blows Per Minute Pressure Model 550095K RB-90 1 1-1/4 9 1-1/16 900 90 926.00 720.00 550094K RB-91 1-1/8 1-1/4 9 1-1/16 900 90 926.00 720.00 550092K RB-90D 1 1-1/4 9 1-1/16 900 90 926.00 720.00 550093K RB-91D 1-1/8 1-1/4 9 1-1/16 900 90 926.00 720.00 550097 RB-110 1-1/8 1-1/4 11 1-1/16 680 90 1,042.00 875.00 550100 RB-110D 1-1/8 1-1/4 11 1-1/16 680 90 1,042.00 875.00 Shank Bushing Style Shank Bushing Stroke Ft/lbs per Blow @ 90 PSI (Lbs.) Model 557901 JCO-1R-RV Round.680 1 9 11 11 307.00 245.00 557902 JCO-2R-RV Round.680 2 18 12-3/4 13 318.00 245.00 557906 JCO-2H-RV Hex.580 2 18 12-3/4 13 318.00 245.00 557903 JCO-3R-RV Round.680 3 25 14-3/8 14 331.00 245.00 557907 JCO-3H-RV Hex.580 3 25 14-3/8 14 331.00 245.00 557904 JCO-4R-RV Round.680 4 42 14 15 343.00 245.00 557908 JCO-4H-RV Hex.580 4 42 16 15 343.00 245.00 See page 210 of the 2006 Industrial Catalog, No. 900894, for more information. See page 211 of the 2006 Industrial Catalog, No. 900894, for more information. jettools.com wiltontool.com 13

MATERIAL HANDLING - Chain Hoists SMH Series Hand Chain Hoists Full range capacity 1/2- to 10-tons Standard features found only in higher priced models Economical hand chain hoist designed for years of trouble-free service 10', 15', 20' and 30' lifts standard, custom length lifts available All steel construction with a durable powder coat finish Lightweight, compact design for low headroom applications Needle bearing supported load sheave for smooth operation SMHX Series Hand Chain Hoists 1-ton, 2-ton, 3-ton, and 5-ton units available Standard features found only in higher priced models Gradual slip clutch provides automatic overload protection Designed for years of trouble-free service 90 00 No. 121704 Rated (Ton) Standard Lift (FT) Model 1-ton Hand Chain Hoists 121704 SMHX-1T-10 1 10 129.00 90.00 121706 SMHX-1T-20 1 20 176.00 123.00 2-ton Hand Chain Hoists 121712 SMHX-2T-10 2 10 203.00 142.00 121714 SMHX-2T-20 2 20 254.00 178.00 3-ton Hand Chain Hoists 121716 SMHX-3T-10 3 10 28000 196.00 121718 SMHX-3T-20 3 20 363.00 254.00 5-ton Hand Chain Hoists 121720 SMHX-5T-10 5 10 394.00 276.00 121726 SMHX-5T-20 5 20 519.00 363.00 See page 138-139 of the 2006 Industrial Catalog, No. 900894, for more information. 75 00 No. 101700 Model Rated (Ton) Standard Lift (FT) 1/2-ton Hand Chain Hoists 101700 SMH-1/2Ton-10' Lift 1/2 10 94.00 75.00 101701 SMH-1/2Ton-15' Lift 1/2 15 105.00 84.00 101702 SMH-1/2Ton-20' Lift 1/2 20 134.00 107.00 101703 SMH-1/2Ton-30' Lift 1/2 30 147.00 118.00 1-ton Hand Chain Hoists 101704 SMH-1Ton-10' Lift 1 10 107.00 86.00 101705 SMH-1Ton-15' Lift 1 15 127.00 102.00 101706 SMH-1Ton-20' Lift 1 20 146.00 117.00 101707 SMH-1Ton-30' Lift 1 30 184.00 147.00 1-1/2-ton Hand Chain Hoists 101708 SMH-1-1/2Ton-10' Lift 1-1/2 10 137.00 110.00 101709 SMH-1-1/2Ton-15' Lift 1-1/2 15 155.00 124.00 101710 SMH-1-1/2Ton-20' Lift 1-1/2 20 177.00 142.00 101711 SMH-1-1/2Ton-30' Lift 1-1/2 30 215.00 172.00 2-ton Hand Chain Hoists 101712 SMH-2Ton-10' Lift 2 10 168.00 134.00 101713 SMH-2Ton-15' Lift 2 15 187.00 150.00 101714 SMH-2Ton-20' Lift 2 20 211.00 169.00 101715 SMH-2Ton-30' Lift 2 30 252.00 202.00 3-ton Hand Chain Hoists 101716 SMH-3Ton-10' Lift 3 10 234.00 187.00 101717 SMH-3Ton-15' Lift 3 15 268.00 214.00 101718 SMH-3Ton-20' Lift 3 20 305.00 244.00 101719 SMH-3Ton-30' Lift 3 30 371.00 297.00 5-ton Hand Chain Hoists 101720 SMH-5Ton-10' Lift 5 10 331.00 265.00 101721 SMH-5Ton-15' Lift 5 15 385.00 308.00 101722 SMH-5Ton-20' Lift 5 20 436.00 349.00 101723 SMH-5Ton-30' Lift 5 30 544.00 435.00 10-ton Hand Chain Hoists 101724 SMH-10Ton-10' Lift 10 10 973.00 778.00 101725 SMH-10Ton-15' Lift 10 15 1,073.00 858.00 101726 SMH-10Ton-20' Lift 10 20 1,174.00 939.00 101727 SMH-10Ton-30' Lift 10 30 1,378.00 1,102.00 See page 136, 137 of the 2006 Industrial Catalog, No. 900898, for more information. L-90 Series Hand Chain Hoists Available with 10' to 30' lifts Compact and portable for ease of positioning material Engineered for commercial and industrial lifting applications 101 00 No. 101505 Rated Cap. (Ton) Standard Lift (FT) Model 1/2-ton Hand Chain Hoists 101505 L-90-1/2 Ton-10' Lift 1/2 10 126.00 101.00 101305 L-90-1/2Ton-15' Lift 1/2 15 150.00 120.00 101306 L-90-1/2Ton-20' Lift 1/2 20 180.00 144.00 101307 L-90-1/2Ton-30' Lift 1/2 30 239.00 191.00 1-ton Hand Chain Hoists 101510 L-90-1Ton-10' Lift 1 10 141.00 113.00 101310 L-90-1Ton-15' Lift 1 15 167.00 134.00 101311 L-90-1Ton-20' Lift 1 20 200.00 160.00 101312 L-90-1Ton-30' Lift 1 30 268.00 214.00 1-1/2-ton Hand Chain Hoists 101515 L-90-1-1/2Ton-10' Lift 1-1/2 10 207.00 166.00 101315 L-90-1-1/2Ton-15' Lift 1-1/2 15 254.00 203.00 101316 L-90-1-1/2Ton-20' Lift 1-1/2 20 300.00 240.00 101317 L-90-1-1/2Ton-30' Lift 1-1/2 30 354.00 283.00 2-ton Hand Chain Hoists 101520 L-90-2Ton-10' Lift 2 10 243.00 194.00 101525 L-90-2Ton-15' Lift 2 15 290.00 232.00 101320 L-90-2Ton-20' Lift 2 20 327.00 262.00 101321 L-90-2Ton-30' Lift 2 30 408.00 326.00 3-ton Hand Chain Hoists 101530 L-90-3Ton-10' Lift 3 10 407.00 326.00 101535 L-90-3Ton-15' Lift 3 15 465.00 372.00 101330 L-90-3Ton-20' Lift 3 20 518.00 414.00 101331 L-90-3Ton-30' Lift 3 30 575.00 460.00 5-ton Hand Chain Hoists 101550 L-90-5Ton-10' Lift 5 10 549.00 439.00 101555 L-90-5Ton-15' Lift 5 15 676.00 541.00 101350 L-90-5Ton-20' Lift 5 20 781.00 625.00 101351 L-90-5Ton-30' Lift 5 30 874.00 699.00 10-ton Hand Chain Hoists 101560 L-90-10Ton-11-1/2' Lift 10 11-1/2 1,369.00 1,095.00 101565 L-90-10Ton-20' Lift 10 20 1,574.00 1,259.00 101566 L-90-10Ton-30' Lift 10 30 1,850.00 1,480.00 20-ton Hand Chain Hoists 101090 L-90-20Ton-20' Lift 5,353.00 4282.00 See page 140-141 of the 2006 Industrial Catalog, No. 900898, for more information. STEEL DEALS - Pricing Effective Through April, 2008

Lever Hoists - MATERIAL HANDLING JLP Series Lever Hoists Economical lever hoist designed for years of trouble-free operation 1/4-ton to 6-ton capacities 5, 10, 15 and 20 lifts standard, custom length lifts available All steel construction with a durable powder coat finish Completely enclosed Weston type automatic brake system holds load in any position Easy-to-use with single hand operation and control JTP Series Lever Hoists Lightweight, heavy-duty lever hoist features built-in automatic overload protection High strength to weight ratio Optional point hooks make this tool indispensable in shipbuilding and fabricating applications 104 00 No. 187206 101 00 No.187707 Model Rated (Ton) Standard Lift (FT) 3/4-ton Lever Hoists With Overload Protection 187206 JTP-75-5 3/4 5 138.00 104.00 187208 JTP-75-15 3/4 15 156.00 117.00 1-1/2-ton Lever Hoists With Overload Protection 187215 JTP-150-5 1-1/2 5 176.00 132.00 187217 JTP-150-15 1-1/2 15 202.00 152.00 3-ton Lever Hoists With Overload Protection 187230 JTP-300-5 3 5 266.00 200.00 187232 JTP-300-15 3 15 311.00 233.00 See page 148-149 of the 2006 Industrial Catalog, No. 900894, for more information. Model Rated (Ton) Standard Lift (FT) 1/4 Ton Lever Hoists 187730 JLP-25-5 1/4 5 80.00 60.00 3/4 Ton Lever Hoists 187705 JLP-50-5 1/2 5 94.00 71.00 187706 JLP-50-10 1/2 10 102.00 77.00 3/4 Ton Lever Hoists 187707 JLP-75-5 3/4 5 134.00 101.00 187708 JLP-75-10 3/4 10 145.00 109.00 187709 JLP-75-15 3/4 15 152.00 114.00 187710 JLP-75-20 3/4 20 163.00 122.00 1-1/2 Ton Lever Hoists 187711 JLP-150-5 1-1/2 5 171.00 128.00 187712 JLP-150-10 1-1/2 10 182.00 137.00 187713 JLP-150-15 1-1/2 15 197.00 148.00 187714 JLP-150-20 1-1/2 20 209.00 157.00 3 Ton Lever Hoists n 187715 JLP-300-5 3 5 259.00 194.00 187716 JLP-300-10 3 10 280.00 210.00 187717 JLP-300-15 3 15 303.00 227.00 187718 JLP-300-20 3 20 320.00 240.00 6 Ton Lever Hoists 187719 JLP-600-5 6 5 411.00 308.00 187720 JLP-600-20 6 20 962.00 722.00 Lever Hoists with Point Hooks Model Rated (Ton) Standard Lift (FT) 1-1/2 Ton Lever Hoists with Points Hooks 287722 JLP-150-10SH 1-1/2 10 207.00 155.00 287723 JLP-150-15SH 1-1/2 15 222.00 167.00 287724 JLP-150-20SH 1-1/2 20 234.00 176.00 3 Ton Lever Hoists with Points Hooks 287726 JLP-300-10SH 3 10 305.00 229.00 287727 JLP-300-15SH 3 15 328.00 246.00 287728 JLP-300-20SH 3 20 345.00 259.00 See page 142, 143 of the 2006 Industrial Catalog, No. 900898, for more information. Mini-Mite Series Lever Hoists Compact size fits easily in a truck or toolbox A size for every need Grade 100 chain for long term service Dependable, lightweight and portable heavy-duty lever hoist for industrial applications 1/4-ton to 6-ton capacities 107 00 No. 187625 Model Rated (Ton) Standard Lift (FT) 1/4-ton Lever Hoists 187625 MM-25 1/4 3' 3" 133.00 107.00 187626 MM-26 1/4 10 152.00 122.00 1/2-ton Lever Hoists 187650 MM-50 1/2 5 13400 107.00 187651 MM-51 1/2 10 153.00 122.00 187652 MM-52 1/2 15 176.00 141.00 187653 MM-53 1/2 20 199.00 159.00 3/4-ton Lever Hoists 187575 MM-75 3/4 5 187.00 150.00 187510 MM-751 3/4 10 219.00 17500 187520 MM-752 3'4 15 268.00 214.00 187519 MM-755 3/4 20 244.00 195.00 1-1/2-ton Lever Hoists 187515 MM-150 1-1/2 5 263.00 210.00 187511 MM-151 1-1/2 10 282.00 226.00 187525 MM-155 1-1/2 15 301.00 241.00 187521 MM-152 1-1/2 20 341.00 273.00 3-ton Lever Hoists 187530 MM-300 3 5 389.00 311.00 187531 MM-310 3 10 425.00 340.00 187535 MM-355 3 15 486.00 389.00 187532 MM-320 3 20 528.00 422.00 6-ton Lever Hoists 187560 MM-600 6 5 679.00 543.00 187562 MM-620 6 20 919.00 735.00 See page 146-147 of the 2006 Industrial Catalog, No. 900898, for more information. jettools.com wiltontool.com 15

MATERIAL HANDLING - Lever Hoists JPNX Series Lever Hoists Robust cast handle for the big jobs Premium grade lever hoist designed for commercial and industrial applications 1/2-ton, 3/4-ton, 1-1/2-ton, and 3-ton models 5', and 15' lifts standard, custom length lifts available 100 grade chain resists abrasion and wear All steel construction with rugged one-piece cast handle Completely enclosed Weston type automatic brake system for precise load spotting Easy-to-use with single hand operation and control Simple design makes routine inspection and maintenance easy wheeling feature without load for quick load attachment Permanently lubricated gears under normal operating conditions Premium grade 100 low wear chain resists abrasion Drop forged safety hooks swivel 360 for easy rigging Proof tested with test certificate Complies with OSHA, ANSI/ASME B30.21 and HST-3 Standards 122 00 No. 275050 JLH Series Lever Hoists 3/4 ton to 6 ton Capacities Available in 5ft, 10ft, 15ft, and 20ft lifts standard, custom lifts available Light weight, compact design for low head room applications All units feature premium 100 grade chain for extreme wear resistance Patented fused break disc design for low maintenance Caged roller bearings used on load sprocket increase ease of use and efficiency 63 00 No. 225650 JLH Series Lever Hoists.8T-1.6T JLH Series Lever Hoists 2.5T-6.3T Model Rated (Ton) Standard Lift (FT) 225650 JPNX-50-5 1/2 5 84.00 63.00 225652 JPNX-50-15 1/2 15 106.00 80.00 225675 JPNX-75-5 3/4 5 138.00 104.00 225676 JPNX-75-15 3/4 15 191.00 143.00 225615 JPNX-150-5 1-1/2 5 220.00 165.00 225616 JPNX-150-15 1-1/2 15 245.00 184.00 225630 JPNX-300-5 3 5 266.00 200.00 225631 JPNX-300-15 3 15 320.00 240.00 See page 144-145 of the 2006 Industrial Catalog, No. 900898, for more information. Model Rated (Ton) Standard Lift (FT) 275050 JLH-80-5.8 5 135.00 122.00 275010 JLH-80-10.8 10 146.00 131.00 275015 JLH-80-15.8 15 153.00 138.00 275020 JLH-80-20.8 20 165.00 149.00.8T Lever Hoists 210050 JLH-100-5 1 5 149.00 134.00 210010 JLH-100-10 1 10 159.00 143.00 210015 JLH-100-15 1 15 171.00 154.00 210020 JLH-100-20 1 20 182.00 164.00 1.6T Lever Hoists 215005 JLH-160-5 1.6 5 172.00 155.00 215010 JLH-160-10 1.6 10 184.00 166.00 215015 JLH-160-15 1.6 15 199.00 179.00 215020 JLH-160-20 1.6 20 211.00 190.00 2.5T Lever Hoists 225005 JLH-250-5 2.5 5 218.00 196.00 225010 JLH-250-10 2.5 10 233.00 210.00 225015 JLH-250-15 2.5 15 251.00 226.00 225020 JLH-250-20 2.5 20 26600 239.00 3.2T Lever Hoists 230005 JLH-320-5 3.2 5 261.00 235.00 230010 JLH-320-10 3.2 10 282.00 254.00 230015 JLH-320-15 3.2 15 306.00 275.00 230020 JLH-320-20 3.2 20 323.00 291.00 6.3T Lever Hoists 260005 JLH-630-5 6.3 5 415.00 374.00 260010 JLH-630-10 6.3 10 450.00 405.00 260015 JLH-630-15 6.3 15 480.00 432.00 260020 JLH-630-20 6.3 20 534.00 481.00 STEEL DEALS - Pricing Effective Through April, 2008

Chain Hoists - MATERIAL HANDLING Single- Electric Chain Hoists, Single Phase Designed for commercial and industrial applications 1/2-ton to 5-ton capacities, 10', 15' and 20' lifts available No. 121100 Slip clutch design overload protection 850 00 Description 121100 1/2SS-1C-10, 1/2 Ton, 1Ph, 10" Lift, 115/230V, Prewired 230V 1,063.00 850.00 121150 1/2SS-1C-15, 1/2 Ton, 1Ph, 15" Lift, 115/230V, Prewired 230V 1,1000.00 880.00 121200 1/2SS-1C-20, 1/2 Ton, 1Ph, 20" Lift, 115/230V, Prewired 230V 1,135.00 908.00 111000 1SS-1C-10, 1 Ton, 1Ph, 10" Lift, 115/230V, Prewired 230V 1,156.00 925.00 111500 1SS-1C-15, 1 Ton, 1Ph, 15" Lift, 115/230V, Prewired 230V 1,198.00 958.00 112000 1SS-1C-20, 1 Ton, 1Ph, 20" Lift, 115/230V, Prewired 230V 1,237.00 990.00 211000 2SS-1C-10, 2 Ton, 1Ph, 10" Lift, 115/230V, Prewired 230V 1,434.00 1,147.00 211500 2SS-1C-15, 2 Ton, 1Ph, 15" Lift, 115/230V, Prewired 230V 1,493.00 1194.00 212000 2SS-1C-20, 2 Ton, 1Ph, 20" Lift, 115/230V, Prewired 230V 1,556.00 1,245.00 311000 3SS-1C-10, 3 Ton, 1Ph, 10" Lift, 115/230V, Prewired 230V 1,785.00 1,428.00 311500 3SS-1C-15, 3 Ton, 1Ph, 15" Lift, 115/230V, Prewired 230V 1,927.00 1,542.00 312000 3SS-1C-20, 3 Ton, 1Ph, 20" Lift, 115/230V, Prewired 230V 2,006.00 1,605.00 511000 5SS-1C-10, 5 Ton, 1Ph, 10" Lift, 115/230V, Prewired 230V 2,373.00 1,898.00 511500 5SS-1C-15, 5 Ton, 1Ph, 15" Lift, 115/230V, Prewired 230V 2,503.00 2,002.00 Single- Electric Chain Hoists, Three Phase Designed for commercial and industrial applications 1/2-ton to 5-ton capacities, 758 00 10', 15' and 20' lifts standard, custom length lifts available No. 123100 Slip clutch design overload protection Description 123100 1/2SS-3C-10, 1/2 Ton, 3Ph, 10' Lift, 230/460V, Prewired 460V 948.00 758.00 123150 1/2SS-3C-15, 1/2 Ton, 3Ph, 15' Lift, 230/460V, Prewired 460V 982.00 786.00 123200 1/2SS-3C-20, 1/2 Ton, 3Ph, 20' Lift, 230/460V, Prewired 460V 1,021.00 817.00 131000 1SS-3C-10, 1 Ton, 3Ph, 10' Lift, 230/460V, Prewired 460V 1,043.00 834.00 131500 1SS-3C-15, 1 Ton, 3Ph, 15' Lift, 230/460V, Prewired 460V 1,078.00 862.00 132000 1SS-3C-20, 1 Ton, 3Ph, 20' Lift, 230/460V, Prewired 460V 1,119.00 1,245.00 231000 2SS-3C-10, 2 Ton, 3Ph, 10' Lift, 230/460V, Prewired 460V 1,316.00 1,053.00 231500 2SS-3C-15, 2 Ton, 3Ph, 15' Lift, 230/460V, Prewired 460V 1,382.00 1,106.00 232000 2SS-3C-20, 2 Ton, 3Ph, 20' Lift, 230/460V, Prewired 460V 1,438.00 1,150.00 331000 3SS-3C-10, 3 Ton, 3Ph, 10' Lift, 230/460V, Prewired 460V 1,728.00 1,382.00 331500 3SS-3C-15, 3 Ton, 3Ph, 15' Lift, 230/460V, Prewired 460V 1,813.00 1,450.00 332000 3SS-3C-20, 3 Ton, 3Ph, 20' Lift, 230/460V, Prewired 460V 1,897.00 1,518.00 531000 5SS-3C-10, 5 Ton, 3Ph, 10' Lift, 230/460V, Prewired 460V 2,261.00 1,809.00 531500 5SS-3C-15, 5 Ton, 3Ph, 15' Lift, 230/460V, Prewired 460V 2,389.00 1,911.00 530200 5SS-3C-20, 5 Ton, 3Ph, 20' Lift, 230/460V, Prewired 460V 2,517.00 2,014.00 Shown with optional 4-button controller. Dual- Electric Chain Hoists, Three Phase Designed for commercial and industrial applications 1/2-ton to 5-ton capacities, 10' and 20' lifts available Slip clutch design overload protection 945 00 No. 503100 Description 503100 1/2DS-3C-10, 1/2 Ton, 3Ph, 10' Lift 230/460V Prewired 460V 1,181.00 945.00 503200 1/2DS-3C-20, 1/2 Ton, 3Ph, 20' Lift 230/460V Prewired 460V 1,236.00 989.00 103100 1DS-3C-10, 1 Ton, 3Ph, 10' Lift 230/460V Prewired 460V 1,227.00 982.00 103200 1DS-3C-20, 1 Ton, 3Ph, 20' Lift 230/460V Prewired 460V 1,307.00 1,046.00 203100 2DS-3C-10, 2 Ton, 3Ph, 10' Lift 230/460V Prewired 2460V 1,556.00 1,245.00 203200 2DS-3C-20, 2 Ton, 3Ph, 20' Lift 230/460V Prewired 460V 1,683.00 1,346.00 303100 3DS-3C-10, 3 Ton, 3Ph, 10' Lift 230/460V Prewired 460V 2,046.00 1,637.00 303200 3DS-3C-20, 3 Ton, 3Ph, 20' Lift 230/460V Prewired 460V 2,217.00 1,774.00 531010 5DS-3C-10, 5 Ton, 3Ph, 10' Lift 230/460V Prewired 460V 2,433.00 1,946.00 532020 5DS-3C-20, 5 Ton, 3Ph, 20' Lift 230/460V Prewired 460V 2,705.00 2,164.00 jettools.com wiltontool.com 17

MATERIAL HANDLING - Hoists AH Series Pneumatic Hoists Designed for commercial applications where air power is preferred 1/4-ton to 1-ton capacities 10' and 20' lifts available 1,403 00 WRH Series Lever Hoists Single or double line operation Convenient push button control Built in upper limit stop Steel cable reel Complies with OSHA, ANSI/ASME B30, 16 AND HST-1 standards No. 105970 Description 105970 AH-25C-10, 1/4 Ton 10' Lift 1,870.00 1,403.00 105971 AH-50C-10, 1/2 Ton 10' Lift 1,941.00 1,456.00 105972 AH-50C-20, 1/2 Ton 20' Lift 2,010.00 1,508.00 105973 AH-100C-10, 1 Ton 10' Lift 2,117.00 1,588.00 105974 AH-100C-20, 1 Ton 20' Lift 2,352.00 1,764.00 66 00 No. 107001 See page 160, of the 2006 Industrial Catalog, No. 900898, for more information. Hoist Pendant Controls Fits models AH-25C, AH-50C, AH-100C available in 6', 11', and 16' lengths for retrofit in the field Description 107001 WRH-440 Wire Rope Hoist 83.00 66.00 107002 WRH-880 Wire Rope Hoist 114.00 91.00 107003 WRH-1320 Wire Rope Hoist 156.00 125.00 408 00 No. 105985 Model (ft.) 105985 AHP-10 6 510.00 408.00 105987 AHP-20 16 556.00 444.80 See page 161 of the 2006 Industrial Catalog, No. 900898, for more information. WRT Series Lever Hoists Single or double line operation Convenient push button control Built in upper limit stop Steel cable reel Complies with OSHA, ANSI/ASME B30, 16 AND HST-1 standards Rugged weatherproof vinyl construction Chain Buckets 114 00 No. 105901 82 00 No. 107004 Model Description 105901 CB-A For all model 10' lifts 142.00 114.00 105902 CB-B For AH-25C/50C to 39' and 100C to 19' 219.00 175.00 105903 CB-C For AH-25C/50C to 65' and 100C to 32' 124.00 192.00 See page 161 of the 2006 Industrial Catalog, No. 900898, for more information. Description 107004 WRT-2000 Wire Rope Hoist Trolley 103.00 82.00 STEEL DEALS - Pricing Effective Through April, 2008

Trolleys - MATERIAL HANDLING 40 00 No. 252200 No. 252005 34 00 No. 262005 PT Series Industrial-Duty Plain Trolleys AT Series Pneumatic Trolley Designed for low maintenance and troublefree operation through a wide range of beams For use with wide-flange H-beams, standard I-beams, or curved track Multiple spacer washers make beam flange width adjustment quick and easy Beam Flange Width Beam (ft.) Min. Radius Curve Model (ton) 252005 1/2 PT 1/2 2-1/2 8 4 19 39 20 53.00 40.00 252010 1 PT 1 3 8 4 19 39 34 68.00 51.00 252015 1-1/2 PT 1-1/2 3-1/4 8 4 19 43 43 105.00 79.00 252020 2 PT 2 3-1/4 8 4 19 43 52 113.00 85.00 252030 3 PT 3 4 8 5 19 51 88 244.00 183.00 252050 5 PT 5 4-5/8 8 5 19 55 124 370.00 278.00 252060 10 PT 10 4-3/4 8 5 19 67 211 732.00 549.00 See pages 150 of the 2006 Industrial Catalog, No. 900898, for more information. HDT Series Heavy-Duty Plain Trolleys 1/2-ton through 5-ton capacities Multiple spacer washers make beam flange wide adjustment quick and easy Hardened wheels with lubricated for life, double sealed ball bearings Beam Flange Width Beam Min. Radius Curve weight Model (ton) 262005 1/2-HDT 1/2 2-1/2-8 3-24-1/2 35 12 40.00 34.00 262010 1-HDT 1 3-8 5-24-1/2 39 18 50.00 43.00 262020 2-HDT 2 3-1/4-8 6-24-1/2 43 32 84.00 71.00 262030 3-HDT 3 4-8 8-24-1/2 51 53 181.00 154.00 262050 5-HDT 5 4-5/8-8 10-24-1/2 55 90 274.00 233.00 See pages 151 of the 2006 Industrial Catalog, No. 900894, for more information. GT Series Industrial-Duty Geared Trolleys with Hand Chain Hand chain gear system provides precision load spotting through a wide range of beams For use with wide-flange H-beams, standard I-beams, or curved track 70 00 No. 252205 Chain (ft.) Beam Flange Width Beam Min. Radius Curve Lift in.) Model Cap y (ton) 252205 1/2 GT 1/2 8 3 6 4 19 39 32 100.00 70.00 252210 1 GT 1 10 3-1/4 8 4 19 39 46 133.00 93.00 252220 2 GT 2 10 3-1/2 8 4 19 43 64 203.00 142.00 252230 3 GT 3 10 5 8 5 19 51 108 344.00 241.00 252250 5 GT 5 10 5 8 5 19 55 147 48700 341.00 252260 10 GT 10 10 6 8 5 19 67 230 1,106.00 774.00 See page 152 of the 2006 Industrial Catalog, No. 900894, for more information. trolley comes equipped with 6' pendant control Use with air hoists: AH-25C, AH-50C or AH-100C 1,900 00 Model Cap'y Flange Width (FPM) Min. Beam Radius Pressure Headroom 252200 AT-1000 2200 3 5 59 57, 70, 85 4-3/4 57 2,235.00 1,900.00 See page 162 of the 2006 Industrial Catalog, No. 900894, for more information. Electric Trolleys For 3PH & 1PH Electric Chain Hoists Designed to give you singlecontrol convenience Solenoid-operated traveling brake Adjustable to fit various size I-beams and wide flange beams 434 00 No. 262605 See page 158 of the 2006 Industrial Catalog, No. 900894, for more information. Description 3 Ph Electric Chain Hoists 262605 1/2ET-3C, 1/2 Ton, 3Ph, 230/460V, Prewired 230V 578.00 434.00 262610 1ET-3C, 1 Ton, 3Ph, 230/460V, Prewired 230V 607.00 455.00 262620 2ET-3C, 2 Ton, 3Ph, 230/460V, Prewired 230V 744.00 558.00 262630 3ET-3C, 3 Ton, 3Ph, 230/460V, Prewired 230V 827.00 620.00 262250 5ET-3C, 5 Ton, 3Ph, 230/460V, Prewired 230V 914.00 686.00 1 Ph Electric Chain Hoists 272705 1/2ET-1C, 1/2 Ton, 1Ph, 115/230V, Prewired 115V 623.00 467.00 272710 1ET-1C, 1 Ton, 1Ph, 115/230V, Prewired 115V 665.00 499.00 272720 2ET-1C, 2 Ton, 1Ph, 115/230V, Prewired 115V 818.00 614.00 272730 3ET-1C, 3 Ton, 1Ph, 115/230V, Prewired 115V 910.00 683.00 272750 5ET-1C, 5 Ton, 1Ph, 115/230V, Prewired 115V 1,022.00 767.00 Electric Trolly Push Button Controls For Electric Trolleys Purchased separately, the control cables feature 2 or 4 push button stations Correct cable length is determined by the hoist lifting height 41 00 No. 152410 Shown with optional 4-button control Description Controls for Single Electric Hoists 152410 PBC-410C SS 4-Button Control Pendant For 10' Lift Hoist & Trolley 54.00 41.00 152415 PBC-415C SS 4-Button Control Pendant For 15' Lift Hoist & Trolley 60.00 45.00 152420 PBC-420C SS 4-Button Control Pendant For 20' Lift Hoist & Trolley 66.00 50.00 152610 PBC-610C SS 6-Button Control Pendant For 10' Lift Hoist & Trolley 81.00 61.00 152615 PBC-615C SS 6-Button Control Pendant For 15' Lift Hoist & Trolley 89.00 67.00 152620 PBC-620C SS 6-Button Control Pendant For 20' Lift Hoist & Trolley 99.00 74.00 Controls for Dual Electric Hoists 142410 DSPBC-410C DS 4-Button Control Pendant 10' Lift Hoist & Trolley 112.00 84.00 142415 DSPBC-415C DS 4-Button Control Pendant 15' Lift Hoist & Trolley 121.00 91.00 142420 DSPBC-420C DS 4-Button Control Pendant 20' Lift Hoist & Trolley 130.00 98.00 142610 DSPBC-610C DS 6-Button Control Pendant 10' Lift Hoist & Trolley 161.00 121.00 142615 DSPBC-615C DS 6-Button Control Pendant 15' Lift Hoist & Trolley 171.00 128.00 142620 DSPBC-620C DS 6-Button Control Pendant 20' Lift Hoist & Trolley 180.00 135.00 jettools.com wiltontool.com 19

MATERIAL HANDLING - Clamps / Pullers JBC Series Industrial-Duty Beam Clamps For construction, commercial and industrial vertical or horizontal rigging operations Mount hoists or lift beams with portable lightweight clamp Adjusts with ease to fit a broad range of wide-flange H or standard I-beams JCH Series Linesman pullers Heavy-duty cable puller designed to lift, lower, stretch, or pull heavy loads 1-1/2 and 2-ton capacities available Drop forged hooks with safety latches standard Complies with ANSI/ASME B30.21 standards 38 00 No. 252710 Model Rated Cap y Beam Flange Width 252710 JBC-1 2,000 2-31/32 8-21/32 11 51.00 38.00 252720 JBC-2 4,000 2-31/32 8-21/32 12 56.00 42.00 252730 JBC-3 6,000 3-15/16 9-2/32 24 88.00 66.00 252750 JBC-5 10,000 4-15/16 10-5/8 32 99.00 74.00 64 00 No. 181330 See page 153 of the 2006 Industrial Catalog, No. 900894, for more information. HD Series Heavy Duty Beam Clamps 1-ton to 5-ton capacities Mount hoists or lift beams with portable light-weight clamp 31 00 No. 202710 Lever Ratio Handle length Cable (ft.) Cable Diameter ping Model General Line Specifications 181330 JCH-3 9.47:1 25-1/4 30 1/4 14-1/2 80.00 64.00 181420 JCH-4 11.79:1 29-7/8 20 1/4 16 85.00 68.00 See page 163 of the 2006 Industrial Catalog, No. 900894, for more information. Model Rated Cap y Beam Flange Width 202710 HD-1T 2,000 3 8-5/8 11 36.00 31.00 202720 HD-2T 4,000 3 8-5/8 13 41.00 35.00 202730 HD-3T 6,000 3-1/8 10-5/8 20 63.00 54.00 202750 HD-5T 10,000 3-1/8 10-5/8 24 71.00 60.00 JCP Series Cable Pullers General purpose cable puller designed to lift, lower, stretch or pull heavy loads 1-ton to 4-ton capacities Heavy-Duty Grip Pullers Industrial quality grip puller designed to lift, lower, or pull heavy loads 3/4-ton to 3-ton capacities Easy-to-use in any direction, angle, or length of pull or lift 17 00 No. 180410 242 00 No. 286515K Lever Min. Distance Between Hooks Model (ton) Lever Ratio Maximum Lift (ft.) 180410 JCP-1 1 18:1 12 16-1/2 17 8.55 22.00 17.00 180420 JCP-2 2 36:1 5 16-1/2 21 9.05 24.00 18.00 180440 JCP-4 4 36:1 5 17-1/8 22 13.1 28.00 21.00 See page 163 of the 2006 Industrial Catalog, No. 900894, for more information. Model Description 286575K JG-75A 3/4T Wire Rope Grip Puller with Cable 250.00 188.00 286515K JG-150A 1-1/2T Wire Rope Grip Puller with Cable 322.00 242.00 286530K JG-300A 3T Wire Rope Grip Puller with Cable 450.00 338.00 See page 162 of the 2006 Industrial Catalog, No. 900894, for more information. STEEL DEALS - Pricing Effective Through April, 2008

Accessories - MATERIAL HANDLING 10 00 No. 252300 Flat Eye Twisted Eye Web Slings Ideal for use with hoisting and rigging irregular or bulky loads Lightweight, flexible and easy-to-handle Heavy-duty 2-ply polyester webbing Red color warning core provides easy-to-notice warning for sling replacement tapered eyes are reinforced to resist abrasion Type 3 (flat eye) or Type 4 (twisted eye) slings available Proof tested with test certificate Complies with OSHA and ANSI/ASME B30.9 standards See page 164 of the 2006 Industrial Catalog, No. 900894, for more information. Twisted Eye Web Slings Ideal for use with hoisting and rigging irregular or bulky loads Lightweight, flexible and easy-to-handle Heavy-duty 2-ply polyester webbing Red color warning core provides easy-to-notice warning for sling replacement tapered eyes are reinforced to resist abrasion type 3 (flat eye) or Type 4 (twisted eye) slings available Proof tested with test certificate Complies with OSHA and ANSI/ASME B30.9 standards 10 00 No. 252330 See page 164 of the 2006 Industrial Catalog, No. 900894, for more information. 13 00 No. 262003 Drum Lifter Vertical Choker Basket Model Width 252300 WSFE-2-6 2 6 6400 5000 12,800 2 16.00 10.00 252301 WFSE-2-8 2 8 6400 5000 12,800 3 36.00 13.00 252302 WSFE-2-10 2 10 6400 5000 12,800 4 42.00 15.00 252310 WSFE-3-6 3 6 8600 6900 17,200 3 47.00 17.00 252311 WSFE-3-8 3 8 8600 6900 17,200 4 56.00 20.00 252312 WSFE-3-10 3 10 8600 6900 17,200 5 67.00 24.00 252320 WSFE-4-8 4 8 11,500 9200 23,000 5 80.00 29.00 252321 WSFE-4-10 4 10 11,500 9200 23,000 6 91.00 33.00 252322 WSFE-4-12 4 12 11,500 9200 23,000 7 102.00 36.00 Vertical Choker Basket Model Width 252330 WSTE-2-6 2 6 6,400 5,000 12,800 2 16.00 10.00 252331 WSTE-2-8 2 8 6,400 5,000 12,800 3 20.00 13.00 252332 WSTE-2-10 2 10 6,400 5,000 12,800 3 23.00 15.00 252340 WSTE-3-6 3 6 8,600 6,900 17,200 3 26.00 17.00 252341 WSTE-3-8 3 8 8,600 6,900 17,200 4 31.00 20.00 252342 WSTE-3-10 3 10 8,600 6,900 17,200 5 37.00 24.00 252350 WSTE-4--8 4 8 11,500 9,200 23,000 6 44.00 29.00 252351 WSTE-4-10 4 10 11,500 9,200 23,000 6 50.00 33.00 252352 WSTE-4-12 4 12 11,500 9,200 23,000 8 56.00 36.00 770 lb capacity For lifting 55 gallon drums that have a top lip, ring or chime Description (lbs) (lbs) 262003 Drum Lifter 770 20 18.00 13.00 Drum Tongs 1000 lb capacity For lifting 55 gallon drums with overhead hoist All steel construction 12 00 No. 262001 Description (lbs) (lbs) 262001 Manual Drum Tongs 1000 7 16.00 12.00 262002 Locking Drum Tongs 1000 17 41.00 31.00 Manual Drum Lifter/Dispenser For 55 gallon closed steel drums 800 lb capacity for full drums Ideal for low level pouring and dumping operations When tilt lock is released, the drum can be rotated 360º either direction Tilt lock can hold drum in horizontal position 137 00 No. 262004 List Description 262004 Manual Drum Lifter / Dispenser 800 lb 183.00 137.00 Geared Drum Lifter/Dispenser For 55 gallon closed steel drums 800 lb capacity for full drums Ideal for low level pouring and dumping operations When tilt lock is released, the drum can be rotated 360º either direction Tilt lock can hold drum in horizontal position Features chain control and low effort for ease of use at any height 195 00 No. 262007 Description 262007 Geared Drum Lifter / Dispenser 800 lb 260.00 195.00 Drum Chain Sling Designed to be used with hoists Can be used on steel drums with or without a lid 31 00 No. 262006 Description Single Double (lbs) 262006 Drum Chain Sling 1100 2200 49 41.00 31.00 jettools.com wiltontool.com 21

MATERIAL HANDLING - Warehouse / Dock J Series Pallet Trucks JTX Series Pallet Truck 5,000 pound capacity High quality welded steel construction with a durable powder coat finish 2-1/2" low profile design for smaller size pallet openings 8,000 pound capacity One-piece cast pump features high quality seals, hardened and chrome plated ram and piston, top-of stroke and overload bypass valves 194 00 No. 140016 239 00 No. 140800 Description 140016 PT-1636J, 16"x36" Forks 135 286.00 194.00 140085 PT-2036J, 20"x36" Forks 204 286.00 194.00 140084 PT-2042J, 20"x42" Forks 177 286.00 194.00 140083 PT-2048J, 20"x48" Forks 167 286.00 194.00 140082 PT-2736J, 27"x36" Forks 204 286.00 194.00 140081 PT-2742J, 27"x42" Forks 204 286.00 194.00 140080 PT-2748J, 27"x48" Forks 204 286.00 194.00 See page 182 of the 2006 Industrial Catalog, No. 900898, for more information. 5,500 lb. capacity 2-1/2" lowered height 210 turning radius 204 00 No. 140091 PTX Series Pallet Trucks 140800 240 00 No. 140033 Description JTX-2748, 27"x48", 8,000lb Pallet Truck See page 186 of the 2006 Industrial Catalog, No. 900898, for more information. Four Way Pallet Truck 5,000 pound capacity High quality welded steel construction with a durable powder coat finish 2-1/2" low profile design for smaller size pallet openings 285 343.00 239.00 Description 140033 PT-3348J, 33"x48" Forks 207 317.00 240.00 See page 185 of the 2006 Industrial Catalog, No. 900898, for more information. Description 140091 PTX-2048, 20"x48" Pallet Truck 167 296.00 204.00 140092 PTX-2036, 20"x48" Pallet Truck 167 296.00 204.00 140093 PTX-2748, 20"x48" Pallet Truck 284 296.00 204.00 See page 183 of the 2006 Industrial Catalog, No. 900898, for more information. 214 00 No. 140070 W Series Pallet Trucks 6,000 pound capacity 200º turning radius allows room to maneuver in tight quarters Articulating 7" poly-over-aluminum steer wheels ensure continual contact with uneven floors Model 140070 PT-2036W, 20"x36" Forks 190 317.00 214.00 140071 PT-2042W, 20"x42" Forks 190 317.00 214.00 140072 PT-2048W, 20"x48" Forks 190 317.00 214.00 140073 PT-2736W, 27"x36" Forks 190 317.00 214.00 140074 PT-2742W, 27"x42" Pallet Truck 189 317.00 214.00 140075 PT-2748W, 27"x48" Pallet Truck 200 317.00 214.00 See page 184 of the 2006 Industrial Catalog, No. 900898, for more information. Electric High Lift Pallet Trucks Designed to lift and transport skids or open-style pallets with pushbutton ease Doubles as a mobile work station to reduce fatigue and lifting injuries Heavy-gauge steel frame with tough powder coat finish Features Dependable Monarchmin-hydraulic pump system Automatic overload bypass provides extra pump protection 140090 1,248 00 No. 140090 Model EHPT- 2745 Cap. Optional Accessories Min.Fork Max.Fork Fork Dim. (LxW/in.) Each 2,200 3-1/4 31-1/2 45 x 26-3/4 376 1,468.00 1,248.00 Model Description 140095 SP-2745 Steel Platform for EHPT-2745 26.00 21.00 See page 187 of the 2006 Industrial Catalog, No. 900898, for more information. STEEL DEALS - Pricing Effective Through April, 2008

Warehouse / Dock - MATERIAL HANDLING 409 00 No. 140088 HLPT Series High Lift Pallet Trucks JWS Series Winch Stackers Designed to lift and transport skids or open-style pallets with ease Great for use as a mobile work station to reduce lifting injuries Heavy-duty steel frame with tough powder coat finish 140088 Model HLPT- 2745 Optional Accessories Minimum Maximum Fork Dim. (LxW/in.) Each JHS Series Hydraulic Stacker 2,200 3-3/8 32 45 x 27 248 454.00 409.00 Model Description 140095 SP-2745 Steel Platform for HLPT-2745 26.00 21.00 See page 187 of the 2006 Industrial Catalog, No. 900898, for more information. Economical and ergonomic way to handle standard 40" x 48" pallets Works like a manual forklift to load or unload trucks or stock shelves Heavy-duty welded steel frame with a durable powder coat finish Powerful two-stage hydraulic pump features quick-lift with no load, topof-stroke and safety overload bypass system Heavy-duty dual roller chain with exceptional strength Swivel casters feature foot brake to prevent movement Simple, easy way to lift, lower and transport heavy loads with minimum effort Heavy-duty welded steel frame with a durable powder coat finish Low effort hand winch equipped with automatic brake system and adjustable length handle Easy to maneuver with large diameter swivel casters Swivel casters feature foot brake to prevent movement Adjustable width forks provide versatility JWS-770 features adjustable leg widths Adjustable width forks and outrigger legs handle all pallet sizes 140501 407 00 No. 140501 Description JWS-770 Adjustable Legs Optional Accessories Cap'y Pallet Cap'y (LxW/in) Load Center Max. Lift Description 140503 SP-770, Optional Steel Platform, Fits JWS-770 26.00 21.00 See page 188 of the 2006 Industrial Catalog, No. 900898, for more information. APT Series Aluminium Platform Carts 770 48x40 18 59 268 479.00 407.00 Lightweight, corrosion-resistant aluminium platform trucks are built for heavy-duty use Box style frame is made of high strength welded aluminium channel Corner sockets at both ends allow handles to be used on either side of the truck 706 00 No. 140521 Shown with optional platform 200 00 No. 140028 Model Cap'y Pallet Cap'y (LxW/ in.) Load Center Max.Lift 140521 JHS-2200 2200 48x40 20 59 568 883.00 706.00 Optional Accessories Description 140523 SP-2200, Optional Steel Platform, Fits JHS-2200 26.00 21.00 See page 188 of the 2006 Industrial Catalog, No. 900898, for more information. Platform Platform Handle Caster ping Model Cap'y 140028 APT-2448 2000 24x48 9 35.8 5x2 56.1 250.00 200.00 140029 APT-3060 2000 30X60 9 35.8 5X2 72.6 300.00 240.00 See page 178 of the 2006 Industrial Catalog, No. 900898, for more information. jettools.com wiltontool.com 23

MATERIAL HANDLING - Warehouse / Dock 40 00 No. 140021 Fold Down Platform Carts Heavy gauge steel construction with large nonskid platform Ideal for transporting loads up to 660 pounds around the shop or office Vinyl perimeter bumper protects walls, doorways, furniture, etc. Folding handle for compact storage Smooth rolling 5" hard rubber casters, two swivel and two fixed on FDPT-660 Large 8" pneumatic casters, two swivel and two fixed, for handling delicate items or rolling over rough surfaces on FDPT-660P PUC Series heavy-duty Resin service carts 74 00 No. 140018 Platform (WxL/ in.) Handle Wheel SC Series Service Carts 3-1/2" deep metal trays are reversible and hold up to 250 pounds each Rugged, metal trays have rolled edge for added strength 14 gauge support brackets; 20 gauge trays Each Model Cap y Wheel Type 140021 FDPT-660 660 24 x 36 34-1/4 5 Rubber 58 49.00 40.00 140022 FDPT-660P 660 24 x 36 37-3/4 8 Pneumatic 73 74.00 59.00 See page 179 of the 2006 Industrial Catalog, No. 900898, for more information. Heavy-duty resin construction resists dents, chips, and rust Handle has built in storage bins Round corners mean no sharp edges to nick walls or furniture Large, quiet, non-marking 5" casters Model Max. Cap'y Shelf Upper Shelf Lower Shelf ping (lbs) 140018 PUC-3117 550 31-1/8x17-1/8 33-1/2 6 40 93.00 74.00 140019 PUC-3725 550 37-3/8x25-5/8 33-1/2 6 42 119.00 95.00 See page 178, of the 2006 Industrial Catalog, No. 900898, for more information. 20 00 No. 140100 Hardwood Dollies Use JET hardwood dollies for moving furniture, bulky crates and many other items Kiln dried oak used to prevent warping or shrinkage Model Bed Type (LxW/in.) Carton Pack 140100 WDF-2416 Flush End 24 x 16 16 1 2400 20.00 140101 WDF-3018 Flush End 30 x 18 20 1 26.00 22.00 140103 WDS-2416 Solid Top 24 x 16 19 1 30.00 26.00 140104 WDS-3018 Solid Top 30 x 18 25 1 31.00 26.00 140105 WDS-3624 Solid Top 36 x 24 30 1 35.00 30.00 140106 WDC-3018 Carpet End 30 x 18 17 1 23.00 20.00 140107 WDC-3624 Carpet End 36 x 24 21 1 26.00 22.00 140108 WDR-3018 Rubber End 30 x 18 19 1 27.00 23.00 See page 179 of the 2006 Industrial Catalog, No. 900898, for more information. Steel Drum Dollies Strong and durable dollies easily transport up to 55 gallon drums Welded steel frame with 3-1/8" cross straps features powder coat finish 18 00 No. 140120 Description 140120 DD-30, 30 Gallon, 770-lb. 18 23.00 18.00 140121 DD-55, 55 Gallon, 900-lb. 21 26.00 21.00 See page 177 of the 2006 Industrial Catalog, No. 900898, for more information. Ideal for moving heavy appliances, carpet rolls, furniture, bulky crates, piano, etc. Includes two sealed hardware dollies Four nylon web straps are provided to secure cargo JDP Series Piano Dolly 39 00 No. 140023 Model Cap y Tray (WxLxD/in.) Carton Pack 140023 SC-1630 500 16 x 30 x 3-1/2 32 36 1 49.00 39.00 140024 SC-2436 500 24 x 36 x 3-1/2 32 50 1 57.00 46.00 95 00 No. 140115 Model Pair Cap'y Max. Lift 140115 JDP-1000 1,000 2-3/4 Nose Plate (WxDxT/in.) 23-1/8 x 4-1/8x1/8 Dimensions (WxLxH/ in.) 23x18x32 52 162.00 95.00 See page 178 of the 2006 Industrial Catalog, No. 900898, for more information. See page 180 of the 2006 Industrial Catalog, No. 900898, for more information. STEEL DEALS - Pricing Effective Through April, 2008

Warehouse / Dock - MATERIAL HANDLING SLT Series Scissor Lift Tables Ideal for lifting, positioning and transporting heavy materials around the shop, factory, warehouse or office Ergonomic answer to preventing back injuries Heavy-duty steel frame and table Smooth rolling poly over nylon casters, two swivel and two fixed with parking brake SLT-1650 model features rugged poly over steel casters Easy-to-use hydraulic foot pump raises table to multiple heights Quick lifting action with no load Safety overload and top-of-stroke bypass system provides maximum pump protection SLT-330F and SLT-660F models feature fold-down handles 174 00 No. 140771 See page 180 of the 2006 Industrial Catalog, No. 900898, for more information. No. of strokes to reach max. height Model Cap y Max. Min. Table Table Width Handle 140771 SLT-330F 330 28-3/4 8-5/8 27-1/2 17-3/4 36 34-1/8 16 91 218.00 174.00 140777 SLT-660F 660 32-3/8 10-5/8 32-1/2 19-5/8 40-1/2 37-13/16 13 158 384.00 265.00 140779 SLT-1650 1650 38-5/8 16 39-3/8 20-1/8 52-1/2 38-1/2 15 243 494.00 355.00 DSLT Series Double Scissor Lift Table Ergonomic answer to preventing back injuries Heavy-duty steel frame and table Smooth rolling poly over nylon casters, two swivel and two fixed, with parking brake Easy-to-use hydraulic foot pump raises table to multiple heights Quick lifting action with no load Safety overload and top-of-stroke bypass system provides maximum pump protection 365 00 No. 140778 Model Cap y Min. Max. Table Table Width Strokes to Reach Max. Handle 140778 DSLT-770 770 13-9/16 51-1/8 35-5/8 20-1/8 45-3/4 21 37-1/4 235 530.00 365.00 See page 181 of the 2006 Industrial Catalog, No. 900898 for more information. SLT Series Jumbo Scissor Lfit Table Lift, position and transport heavy loads with ease Heavy-duty steel frame and extra large table surface Easy-to-use hydraulic foot pump features safety overload and top-of-stroke bypass protection Quick lifting action with no load Convenient patent pending pump release handle Easy rolling poly over nylon casters, two swivel and two fixed Foot operated parking brake prevents movement 399 00 No. 140780 Model Cap y Min. Table Max. Table Table (LxWxH/in.) Strokes to Reach Max. Handle 140780 SLT-1100 1,100 11-1/8 36 63 x 31-1/2 x 2 73-1/2 33 37 292 499.00 399.00 See page 181 of the 2006 Industrial Catalog, No. 900898 for more information. jettools.com wiltontool.com 25

MATERIAL HANDLING - Warehouse / Dock TSLT Series Tilting Scissor Lift Table Combines lifting, tilting and transporting in a single unit to provide easy access to parts bins, tote boxes, etc. Helps reduce bending and lifting injuries Heavy-duty steel frame and table Easy-to-use hydraulic foot pump features safety overload and top-of-stroke bypass protection Quick lifting action with no load Large steel retaining lip secures load during operation Convenient patent pending pump release handle Easy rolling poly over nylon casters, two swivel and two fixed Foot operated parking brake on swivel casters 365 00 No. 140770 Model Cap y Min./Max. Table Front Min./Max. Table Back Table (LxWxH/in.) Max. Table Tilt (deg.) Strokes to Reach Max. Handle 140770 TSLT-770 700 17-1/8 / 39 17-1/8 / 61 36 x 24 x 1-3/4 45 48 23 37-5/8 298 473.00 365.00 See page 181 of the 2006 Industrial Catalog, No. 900898, for more information. Load Binders Drop-forged, heat-treated alloy steel construction Take up slack and secure chain around cargo in one operation 8 00 No. 583246 Min./Max. Chain Handle Working Load Limit Model Take-Up 583246 LB-8 3/16 / 1/4 11-7/8 2-3/4 2600 4 15.00 8.00 583245 LB-19 5/16 / 3/8 15-3/4 4 5400 9 18.00 12.00 583247 LB-28 3/8 / 1/2 18-1/2 4 9200 12 27.00 19.00 583248 RLB-19 5/16 / 3/8 14 8 5400 11 30.00 20.00 RSA Series Ratchet Straps Designed to hold loads in place on trucks, rail cars, ships and other freight carriers Easy to attach and remove with 18" fixed length Heavy-duty quick-action ratchet draws strap tight over the load Strap is weather resistant, low stretch 2-ply polyester Red color core provides warning that strap is damaged and must be replaced Zinc coated steel components to inhibit rust Flat hook or J-hook style available See page 190 of the 2006 Industrial Catalog, No. 900898, for more information. Barrel Pumps For dispensing gasoline, diesel fuel, kerosene, machine oil, transmission fluid, hydraulic fluid, and similar light petroleum based products Strong die cast aluminum construction 82 00 No. 140031 Model 140031 DHP-001 Diaphragm Hand Pump 15 102.00 82.00 See page 177 of the 2006 Industrial Catalog, No. 900898, for more information. 9 00 No. 583230 See page 189 of the 2006 Industrial Catalog, No. 900898, for more information. Pallet Pullers Heavy-duty, solid steel pallet pullers are designed to pull pallets across a smooth floor Heat treated, carbon steel teeth 33 00 No. 140001 Working Break Load Limit Strength Web Strap Width Web Strap (ft.) Fixed Strap Model 140001 PAPL-1, 1 Ton 13 41.00 33.00 140002 PAPL-2, 2 Ton 22 95.00 71.00 See page 189 of the 2006 Industrial Catalog, No. 900898, for more information. Model Hook Type 583230 RSA-6F 2000 6000 Flat 2 27 18 6 12.00 9.00 583231 RSA-10F 3300 10,000 Flat 2 27 18 7 15.00 12.00 583232 RSA-6J 2000 6000 J 2 27 18 6 12.00 9.00 583233 RSA-10J 3300 10,000 J 2 27 18 7 15.00 12.00 STEEL DEALS - Pricing Effective Through April, 2008

Warehouse / Dock / Winches - MATERIAL HANDLING Single Sheaves Cast iron for long life Brass sleeve bearings Ball type oiler 4 00 No. 303103 Bore (ton) Wire Rope Dia. Wt. 303103 3 1/2 1/2 5/16 1 5.00 4.00 303104 4 5/8 3/4 3/8 2 7.00 5.00 303105 5 3/4 1-1/2 1/2 4 9.00 7.00 303106 6 1-1/8 2-1/2 5/8 6 14.00 11.00 See page 165 of the 2006 Industrial Catalog, No. 900894, for more information. 27 00 No. 313504 19 00 No. 302903 Yarding Blocks Fast and strong for light-duty, high-speed applications High carbon steel sheave Lifetime lubricated sealed ball bearings Model (ton) Wire Rope Dia 313504 YB-4 1 3/8 4 34.00 27.00 313505 YB-5 1-1/2 1/2 9 57.00 46.00 313506 YB-6 2 9/16 13 79.00 63.00 See page 165 of the 2006 Industrial Catalog, No. 900894, for more information. Snatch Blocks For light service use Cast iron single or double sheave Drop forged hook with safety latch Bronze bushings (ton) Wire Rope Dia 302903 3 Single 1/2 5/16 5 24.00 19.00 302904 4 Single 3/4 3/8 9 32.00 26.00 302905 5 Single 1-1/2 1/2 15 44.00 35.00 302906 6 Single 2-1/2 5/8 24 66.00 53.00 302908 8 Single 4 3/4 34 127.00 102.00 303003 3 Double 1/2 5/16 8 32.00 26.00 303004 4 Double 3/4 3/8 16 45.00 36.00 303005 5 Double 1-1/2 1/2 25 68.00 54.00 303006 6 Double 2-1/2 5/8 41 102.00 82.00 303008 8 Double 4 3/4 89 163.00 130.00 See page 165 of the 2006 Industrial Catalog, No. 900894, for more information. 331 00 No. 182080 designed for mounting in almost any position Unit comes complete with 24 foot power harness that connects to the winch switch Mounted switch can be operated with remote lanyard Power-in and power-out Self-locking gearbox 186 00 JWF Heavy-Duty Industrial Winches Engineered for dependable, quiet and troublefree operation 1200-lb to 20,000-lb capacities Hermetically sealed gear and brake sections provide superb protection from dust and weather Ratchets in and out with patent pending no load free-wheeling feature Double-tipped brake pawl system for constant engagement 163 00 115V Electric Winch Compact winch is designed to operate on standard 115V house current up to 10 Amp draw Full power-in and power-out dynamic and automatic full-load mechanical brake 6' industrial type pendant control Permanently lubricated gearbox requires no lubrication Equipped with pulley block to double pulling capacity, extend winch and wire rope life. Description 182080 EW-10, 115V, 5/32" x 45' Cable, 1,000-lb. 414.00 331.00 See page 167 of the 2006 Industrial Catalog, No. 900894, for more information. 12V Electric Winches No. 182010 Description 182010 EW-20A, 12V, 5/32" x 25' Cable, 1,000-lb. 232.00 186.00 182085 EW-30A, 12V, 7/32" x 40' Cable, 3,000-lb. 322.00 258.00 182077 EW-60A, 12V, 7/32" x 50' Cable, 4,000-lb. 501.00 401.00 See page 166 of the 2006 Industrial Catalog, No. 900894, for more information. No. 181041 Description 181041 IWF-100N, 1/2 Ton Horizontal 204.00 163.00 181042 IWF-300N, 1-1/2 Ton Horizontal 322.00 258.00 181043 IWF-500N, 2-1/2 Ton Horizontal 339.00 271.00 181044 IWF-1000N, 5-1/2 Ton Horizontal 422.00 338.00 181045 IWF-2000N, 11 Ton Horizontal 538.00 430.00 181046 IWF-3000N, 16-1/2 Ton Horizontal 989.00 791.00 See page 168 of the 2006 Industrial Catalog, No. 900894, for more information. jettools.com wiltontool.com 27

MATERIAL HANDLING - Accessories / Jacks GPW Series General Purpose Winches Rugged zinc plated steel construction for corrosion resistance 1000 pounds to 2500 pounds capacities Great for use on boat trailers and more Reinforced frame for extra strength Lifetime lubricated drum bushing and gear shaft bearings 17 00 No. 181000 Winch Wheel Handle Load Cap. Gear Ratchet Hand Model Ratio Position Break 181000 GPW-1000 1000 4.2:1 Off No 8 6 21.00 17.00 181200 GPW-1200 1200 4.2:1 Center No 8 6 22.00 18.00 181400 GPW-1400 1400 4.2:1 Center No 8 7 25.00 20.00 182000 GPW-2000 2000 4:6/11.1 Center No 11 15 45.00 36.00 182500 GPW-2500 2500 5.1:1/12.1:1 Center Yes 11 16 46.00 37.00 See page 167 of the 2006 Industrial Catalog, No. 900894, for more information. 82 00 AHJ Series /Hydraulic Bottle Jacks For lifting, pushing,spreading, bending, pressing or straightening requirements Not affected by temperature extremes All models work in upright, angle, or horizontal position ped in heavy-duty blow molded plastic case No. 456612 Rated Minimum Maximum ping Base weight Model (ton) (LxW/in.) 456612 AHJ-12 12 9-11/16 18-11/16 8.27x6.30 33 102.00 82.00 456620 AHJ-20 20 9-11/16 18-11/16 8.66x6.89 40 115.00 92.00 See page 170 of the 2006 Industrial Catalog, No. 900894, for more information. JTJ Series Industrial-Duty Toe Jacks Heavy-duty, industrial quality, dual purpose jack Designed for lifting loads with very low minimum clearances (toe) or high clearances (head) Ideal for house moving, machinery installation and application at shipyard, bridge building or plant construtction sites 89 00 No. 454502 Rated Cap y Toe (ton) Toe Ht Min (in) Toe Ht Max Head Ht Min Model Head Ht Max (in) 454502 JTJ-2ST 2 5/8 5-1/16 9-3/8 13-3/4 119.00 89.00 454505 JTJ-5ST 5 7/8 5-9/16 11-3/4 16-1/8 205.00 154.00 454510 JTJ-10ST 10 1-1/8 6-13/16 13-1/8 18-1/2 279.00 209.00 JHJ Series /Hydraulic Bottle Jacks For lifting, pushing, spreading, bending, pressing or straightening requirements Not affected by temperature extremes Low profile truck models or standard models 20 00 No. 453301 Rated Minimum Piston Maximum Base Model (ton) (LxW/in.) 453301 JHJ-2 2 7-1/8 4-1/2 13-5/8 4-1/2 x 2-1/2 26.00 20.00 453303 JHJ-3 3 7-1/2 4-1/2 14-3/8 4-9/16 x 2-13/16 31.00 23.00 453305 JHJ-5 5 7-7/8 4-5/8 15-1/2 5-5/8 x 3-1/4 41.00 31.00 453308 JHJ-8 8 7-7/8 4-5/8 15-1/2 6 x 3-1/2 49.00 37.00 453312 JHJ-12 1/2 12-1/2 9-1/2 5-7/8 18-1/2 6-1/2 x 4-1/8 57.00 43.00 453313K JHJ-12 1/2L 12-1/2 6-3/4 3-3/4 13-3/8 6-1/2 x 4-1/8 5700 43.00 453317 JHJ-17 1/2 17-1/2 10-3/8 6-1/2 20 7-1/8 x 4-5/8 84.00 63.00 453318K JHJ-17 1/2L 17-1/2 6-3/4 3-1/2 13 7-1/8 x 4-5/8 84.00 63.00 453322 JHJ-22 1/2 22-1/2 10-5/8 6-1/4 16-7/8 7-1/8 x 5-1/2 90.00 68.00 453323K JHJ-22 1/2L 22-1/2 7-1/8 3-3/8 12 7-1/4 x 5-1/16 90.00 68.00 453335K JHJ-35 35 11 6-1/4 17-1/4 8-3/8 x 5-1/2 189.00 142.00 453360K JHJ-60 60 12 6-3/4 8-5/8 9-1/4 x 7-3/8 44800 336.00 453399K JHJ-100 100 12 5-2 17-11/16 14-31/32 x 10-7/16 1,783.00 1,337.00 See page 169 of the 2006 Industrial Catalog, No. 900894, for more information. SJ Series Screw Jacks Contractor quality mechanical jack for allpurpose lifts and supports Holds heavy loads indefinitely - will not creep Heavy-duty bell shaped cast base Less effort required to lift capacity load with new design Corrugated steel swivel head turns easily under load Easy to carry and position with built-in handle 18 00 No. 441305 Model (ton) Screw (ODxL) Bar Hole Head Dia. Base Closed 441305 SJ-5 5 1 x 6 9/16 2-3/8 4-1/2 9 7 24.00 18.00 441310 SJ-10 10 1-1/2 x 8-3/8 11/16 3-1/16 5-1/4 11 19 50.00 38.00 441315 SJ-15 15 1-5/8 x 10-1/2 13/16 3-1/2 6 13-3/4 28 59.00 44.00 441320 SJ-20 20 2 x 12 13/16 4-1/8 6-7/8 16 36 71.00 53.00 441325 SJ-25 25 2-1/2 x 12 13/16 4-3/8 8 16-1/2 44 94.00 71.00 See page 171 of the 2006 Industrial Catalog, No. 900894, for more information. 3 00 No. 440301 Screw Jack Turning Bars Nunber Model Fits Jack Wt. (lbs) 440301 SJTB-1/2 1/2 x 18 SJ-5 3 4.00 3.00 440302 SJTB-5/8 5/8 x 24 SJ-10 4 6.00 4.00 440303 SJTB-3/4 3/4 x 36 SJ-15-25 5 8.00 5.00 440304 SJTB-1 3/4 x 42 SJ-15-25 8 18.00 13.00 See page 171 of the 2006 Industrial Catalog, No. 900894, for more information. STEEL DEALS - Pricing Effective Through April, 2008

Jacks - MATERIAL HANDLING JSJ Series Short Chassis Service Jacks Transmission Jacks Features automatic safety overload designed for the removal and installation bypass system of auto and light truck transmissions or Full swivel, ball bearing rear casters are transfer cases positioned for best load distribution and Heavy-duty steel ball bearing swivel optimal maneuvering casters Quick Lift pump feature with no load Fully adjustable saddle, corner brackets Complies with ANSI/ASME PALD-10 and safety chains standards Quick lift hydraulic pump for rapid lifting to contact point without load, except TTJ-1000S Safety overload and top-of-stroke 62 00 bypass system provides maximum pump No. 454227 protection Min. Max. Width Cap y Saddle Model (ton) (dia./in.) 454227 JSJ-2-1/4X 2-1/4 4-1/2 19-1/4 4-3/4 26-1/2 13-7/8 454223 JSJ-3X 3 4-1/2 21 5-1/8 26 13 240 00 No. 454430 JSJ Series Long Chassis Service Jacks JASJ Series Long Chassis /Hydraulic Service Jacks 392 00 No. 454550 Handle 39-7/8 (2pc.) 37-3/4 (2pc.) See pages 172 of the 2006 Industrial Catalog, No. 900894, for more information. For heavy-duty automotive and truck repair and maintenance shops Extra wide swivel saddle for added stability All models feature a locking T-bar handle and foot pump Model (ton) Minimum (in) Maximum (in) Saddle (dia/in.) See pages 172 of the 2006 Industrial Catalog, No. 900894, for more information. 84 77.00 62.00 90 93.00 74.00 454430 JSJ-3T 3 5-1/8 23-5/8 4-7/8 165 369.00 240.00 454450 JSJ-5T 5 5-7/8 22 5-1/8 242 509.00 311.00 454410 JSJ-10T 10 6-1/3 22 6 364 821.00 534.00 For heavy-duty automotive and truck repair and maintenance shops Extra wide swivel saddle for added stability Complies with ANSI/ASME PALD-10 standards 194 00 No. 450055 Model Cap Y See pages 173 of the 2006 Industrial Catalog, No. 900894, for more information. 268 00 No. 454200C Min. Max. Sideways Adj. Left/Right (deg.) Back/ Forw. (deg.) 450055 TJ-1000 1000 8-1/4 30-1/2 30 60 / 17 Dim. (WxL/ in.) 19 x 34-3/4 Wt. JASJ Series /Hydraulic Service Jack 137 242.00 194.00 450077 TJ-2000X 2000 8 31 30 17 / 60 19 x 36 188 315.00 252.00 Equipped with a labor-saving air pump and a high-speed cylinder piston that increases lifting speeds and efficiency 3-1/8" extension screw height Lifting time: 120 seconds with rated load, 35 seconds with no load 90 to 150PSI, 3HP compressor required Min. Cap y Max. Saddle Model (ton) (dia./in.) 454200C JASJ-22C 22 8-1/4 20-5/8 2-5/8 41-3/8 110 298.00 268.00 See pages 173 of the 2006 Industrial Catalog, No. 900894, for more information. JMJ Series Motorcycle/ATV Jack Convenient foot operated pump and release valve allow use of both hands to position and stabilize vehicle all steel construction with rust resistant powder coat finish Steel swivel casters with foot brake to prevent movement 67 00 No. 454355 Description 454550 JASJ-5L 5T Lng Cha /Hyd Serv Jack 242 560.00 392.00 454110 JASJ-10L 10T Lng Cha /Hyd Sev Jack 364 903.00 632.00 Min. Max. Saddle Dimensions (LxW/in.) Safety Arm Pos. Cap y Numer. Model 454355 JMJ-1500 1500 5-1/2 17-3/4 12 x 2-1/2 (2) 6 (LxWxH/ in.) 36 x 16 x 14 See pages 174 of the 2006 Industrial Catalog, No. 900894, for more information. 82 84.00 67.00 jettools.com wiltontool.com 29

MATERIAL HANDLING - Jacks / Stands Hydraulic Shop Cranes Heavy-duty steel frame construction Quick-lift hydraulic ram features two pump pistons - lifts with both up and down stroke Chrome plated plunger and ram pistons provide superior rust resistance top-of-stroke and safety overload bypass system protects hydraulic ram assembly Oversized hitch pin for quick and easy boom adjustment Steering handles enable improved maneuverability Rugged steel fixed and swivel casters JFHC-200X model features folding legs with safety pins for compact storage Complies with ANSI/ASME PALD-12 standards 15 00 No. 441003 JSS Series Heavy-Duty Jacks Stands Heavy-duty, welded steel construction The weight of the load prevents the ratchet pawl from disengaging while under load Reinforced legs for use on asphalt 207 00 No. 106200 Model Boom Position Cap y 106200 JHC-200X 1 1100 295 296.00 207.00 2 2000 3 3300 4 4400 106203K JFHC-200X 1 1100 229 301.00 211.00 2 2000 3 3300 4 4400 See pages 175 of the 2006 Industrial Catalog, No. 900894, for more information. JES Series Engine Stands Engine can be rotated a full 360º with turning bar Positive-action lock secures engine in any position Engine-mounting plate included with four adjustable support arms Min. Max. Model Base 441003 JSS-3 11-3/4 17-1/4 7-5/8 x 8-5/8 19 21.00 15.00 441006 JSS-6 15 24-1/4 10 x 11-1/4 34 32.00 22.00 441012 JSS-12 19 30-3/8 12-3/8 x 14-1/4 78 93.00 65.00 See page 176 of the 2006 Industrial Catalog, No. 900894, for more information. Farm Jacks Multi-purpose jack to lift, push, pull, or clamp Rugged steel construction throughout automatic step-by-step operation for raising and lowering load Large cast iron base for stability adjustable cast steel top clamp clevis for clamping operations Safety shear pin protects lifting saddle and dropping of load if jack is overloaded Cast steel large and small runners Reversible upright steel bar for long life Bar holes will accommodate chains, cables, etc. Quick disengage with no load 83 00 No. 442077 34 00 No. 440435 Model Base (LxW/in.) Each 442077 JES-2000C 2,000 40 x 30 36 75 104.00 83.00 See page 176 of the 2006 Industrial Catalog, No. 900894, for more information. Model Lifting Cap y at 1' Winching/ Pulling Cap Y Clamping Cap y Min. Max. 440435 FJ-3-1/2 7000 5000 750 4-1/2 43-3/8 35 42.00 34.00 See pages 174 of the 2006 Industrial Catalog, No. 900894, for more information. STEEL DEALS - Pricing Effective Through April, 2008

Miscellaneous - MATERIAL HANDLING BRK Series Hydraulic Body Repair Kits Let hydraulic power make light work of body or collision repairs Straighten, bend, press or spread steel with 4-ton or 10-ton capacity models automatic safety overload system protects equipment Proof tested and certified to meet ANSI/ASME B30.1 standards two-stage piston for quick-action pump with BRK10A 81 00 No. 680004 2008 ARA Promotion Rules 1. give-a-ways valid for orders placed only during the dates of the show, Feb 12-14 2008. 2. A total of one premium give-a-way per company during the dates of the show. 3. Orders may not be combined to increase total value of order. 4. Other non-promo items may be added to the order; they will not receive pricing but will receive the terms and will count toward the total order value. 5. Freight paid at 1,500.00 within the continental US. For customers outside of the continental US, freight will be paid to the US border. Beyond that is the responsibility of the customer. Customers in Alaska, Puerto Rico and Hawaii, freight will be paid to your location with a 5,000 dollar order. Model No. of Pieces 680004 BRK-4A 18 44 115.00 81.00 680010 BRK-10A 17 85 192.00 134.00 See pages 171 of the 2006 Industrial Catalog, No. 900894, for more information. Order Value Terms Give Away Portable Utility Mixer Motor mount slotted for 2HP gasoline engine Large 3.5 cubic foot capacity drum with replaceable tines Handles two 90 lb. Bags of dry cement or mortar with ease Sealed ball bearings support drum rotation which insures low maintenance and long life Spring-loaded handle and slotted locking plate secure tip angle of the drum Drum tips 360 1500-4999 5000-9999 1% 15 days or 30 Freight Paid 2% 15 or 30, 60, 90 10K + 2% 15 or 30, 60, 90 140093 PT-2748J 140501 JWS-770 Winch stacker with free platform, 140503 140780 Jumbo Scissor Lift Table Order Value Terms Give Away 316 00 No. 229235 1500-4999 5000-9999 Standard Terms Freight Paid 2% 15 or 30, 60, 90 Freight Paid 140093 PT-2748J Series 140501 JWS-770 Winch stacker with free platform, 140503 Modelv RPM Voltage AMP Horsepower 229235 PUM-35 1,725 115/230V, Prewired 115V 15 1/2 125 395.00 316.00 2% 15 or 10K + 30, 60, 90 Freight Paid 140780 Jumbo Scissor Lift Table jettools.com wiltontool.com 31

Pricing Effective Through April, 2008 No. 901202 5M 01/08 2008 WMH TOOL GROUP, Inc. All Rights Reserved. Printed in the U.S.A. WMH TOOL GROUP ELGIN, IL 60123 wmhtoolgroup.com jettools.com