Bareshaft Blowers S2H Two Lobe Series
S2H Series Blowers Range Range of positive displacement blowers featuring two lobes for use in compression and vacuum for air or neutral gases. Pressure up to 1 bar (14.5 psig) Vacuum up to 540 mbar (16 "Hg) SN Series flow range by model: S2H 22 to S2H 52 (BSP), S2H 22N to S2H 53N (NPT) From 15 m3/h (9 cfm) to 1590m3/h (935 cfm) S2H 62 to S2H 84 (NP 10) From 1030 m3/h (605 cfm) to 9400 m3/h (5529 cfm) Experience and know how With almost a century of experience in the manufacture and the sale of rotary positive displacement blowers, Ingersoll Rand has a large range of two-lobe blowers specially designed to the meet the demanding requirements of standard air or neutral gas applications: efficiency, competitiveness, and robustness. This know-how ensures that the entire range of standard blowers benefits from the largest technological developments, allowing the user to obtain an optimum solutions best suited to his needs.. Benefits High mechanical and volumetric efficiency Reliability in operation Air cooled, oil free operation Fast and easy maintenance Dynamically balanced impellers Detachable feet allow for vertical or horizontal flow Clockwise or counter-clockwise rotation Direct drive or V-belt drive available throughout the operating range Application Thousands of international installations of Ingersoll Rand blowers are proof of their reliability and strength, providing universal solutions in wide-ranging applications such as: Water treatment Pneumatic conveying Combustion Air Centralized Cleaning Fluidization Homogenization Gas Compression 2
Performance S2H22 to S2H52 / S2H22N to S2H52N Model Maximum Inlet Flow Max. Differential pressure Max. Vaccum m3/h cfm mbar psig mbar "Hg S2H 22 100 59 700 10.2 500 15 S2H 23 225 132 350 5.1 350 10.5 S2H 31 200 117 1000 14.5 500 15 S2H 32 300 176 700 10.2 500 15 S2H 33 525 309 350 5.1 350 10.5 S2H 41 280 165 1000 14.5 500 15 S2H 42 600 353 620 9 500 10.5 S2H 43 825 485 350 5.1 350 10.5 S2H 51 450 265 1000 14.5 500 15 S2H 52 650/900 382/529 620/550 9/8 500 15 S2H 63 3250 1912 750 10.9 500 15 S2H 64 5000 2941 600 8.7 500 15 S2H 83 6200 3647 750 10.9 500 15 S2H 84 9500 5588 600 8.7 500 15
S2H 22 to S2H 52 Features Casing: Close grained cast iron. Ribbed for strength. Head-plates: Close grained cast iron. Machined for accurate bearing location and impeller alignment. Rotors: Cast iron with pressed-in steel shafts. Gears: Ground and hardened alloy steel spur gears. Bearings: Anti-friction bearings, retained at gear end to allow accurate setting of gear end clearance between headplate and impellers. Lubrication: Oil splash lubricated at gear end. Grease lubricated at drive end. Seals: Single lip seals for air blowers and exhausters. For gas boosting, special seals are used. Motor start: Direct on-line preferred. Star Delta starting possible providing that the machine is unloaded on start-up. Design Part European Designation ASTM Blower Body EN GJL 200 A 48 gr 30 B End covers EN GJL 200 A 48 gr 30 B Rotors EN GJL 200 A 48 gr 30 B Shafts EN 10083-1-91/50CR V4 Gears CARBON STEEL 817 M 40
S2H 63 to S2H 84 Features Casing: Close-grained cast iron. Ribbed for strength. Head-plates: Close-grained cast iron. Machined for accurate bearing location and impeller alignment. Rotors & Shafts: Integral Ductile iron. Gears: Ground and hardened alloy steel helical gears. Durable grip rings fasten gears to shaft and allow for quick and easy disassembly and re-timing. Lubrication: Oil splash lubrication at both drive and nondrive ends. Seals: Nilos ring and piston rings with intermediate venting chamber. For gas boosting, special seals are used. Motor start: Direct on-line preferred. Star Delta starting possible provided that the machine is unloaded on start-up. Bearings: Large double-row anti friction spherical roller bearings, retained at gear end to allow accurate setting of gear end clearance between head-plate and impellers. Design Part European Designation ASTM Blower Body EN GJL 200 A 48 gr 30 B End covers EN GJL 200 A 48 gr 30 B Rotors EN GJS 400-15 A 5 36-60-40-18 Shafts EN GJS 400-15 A 5 36-60-40-18 Gears CARBON STEEL 817 M 40 5
Dimensions S2H 22 > S2H 53 Blower Size A Bv Bh C Dv Dh dv dh E e F G H S2H22N 101 75 102 127 130 140 45 40 35 31.5 152 4 124 S2H23N 152 75 102 178 130 140 45 40 35 31.5 152 4 124 S2H31N 134 128 146 170 165 184 45 54 44.5 40.5 194 4 159 S2H32N 156 128 146 192 165 184 45 54 44.5 40.5 194 4 159 S2H33N 223 128 146 259 165 184 45 54 44.5 40.5 194 4 159 S2H41N 153 152 152 183 190 190 47 54 51 40 212 5 165 S2H42N 210 152 152 240 190 190 47 54 51 40 212 5 165 S2H43N 273 152 152 303 190 190 47 54 51 40 212 5 165 S2H51N 178 178 178 216 230 230 57 57 63.5 46 260 6 203 S2H52N 229 178 178 267 230 230 57 57 63.5 46 260 6 203 NOTE: All dimensions in millimeters unless otherwise noted Blower Size A Bv Bh C Dv Dh dv dh E e F G H S2H22N 3.98 2.95 4.02 5.00 5.12 5.51 1.77 1.57 1.38 1.24 5.98 0.16 4.88 S2H23N 5.98 2.95 4.02 7.01 5.12 5.51 1.77 1.57 1.38 1.24 5.98 0.16 4.88 S2H31N 5.28 5.04 5.75 6.69 6.50 7.24 1.77 2.13 1.75 1.59 7.64 0.16 6.26 S2H32N 6.14 5.04 5.75 7.56 6.50 7.24 1.77 2.13 1.75 1.59 7.64 0.16 6.26 S2H33N 8.78 5.04 5.75 10.20 6.50 7.24 1.77 2.13 1.75 1.59 7.64 0.16 6.26 S2H41N 6.02 5.98 5.98 7.20 7.48 7.48 1.85 2.13 2.01 1.57 8.35 0.20 6.50 S2H42N 8.27 5.98 5.98 9.45 7.48 7.48 1.85 2.13 2.01 1.57 8.35 0.20 6.50 S2H43N 10.75 5.98 5.98 11.93 7.48 7.48 1.85 2.13 2.01 1.57 8.35 0.20 6.50 S2H51N 7.01 7.01 7.01 8.50 9.06 9.06 2.24 2.24 2.50 1.81 10.24 0.24 7.99 S2H52N 9.02 7.01 7.01 10.51 9.06 9.06 2.24 2.24 2.50 1.81 10.24 0.24 7.99 NOTE: All dimensions in inches unless otherwise noted. Imperial measurements are approximations based on the metric dimensions.
hv hh Iv Ih L L1 L2 O BSP (in.) S dia V W X Y in. 89 95 280 216 260 113 147 1 1/4 10 34 38 222 3/16 5/8 19 89 95 280 216 311 139 172 2 10 34 38 222 3/16 5/8 21 114 127 335 264 314 146 168 1 1/2 10 54 60 283 3/16 5/8 34 114 127 335 264 336 157 179 2 10 54 60 283 3/16 3/4 38 114 127 335 264 402 190 212 3 10 54 60 283 3/16 3/4 48 114 159 379 312 380 173 207 2 12 54 61 313 1/4 7/8 50 114 159 379 312 437 202 235 3 12 54 61 313 1/4 7/8 60 114 159 379 312 501 234 267 4 12 54 61 313 1/4 7/8 73 139.5 178 465 368 479 196 283 2 1/2 12 54 60 387 5/16 1 1/8 95 139.5 178 465 368 530 222 308 4 12 54 60 387 5/16 1 1/8 102 Z in. Weight kg hv hh Iv Ih L L1 L2 O BSP (in.) S dia V W X Y in. 3.50 3.74 11.02 8.50 10.24 4.45 5.79 1 1/4 0.39 1.34 1.50 8.74 3/16 5/8 42 3.50 3.74 11.02 8.50 12.24 5.47 6.77 2 0.39 1.34 1.50 8.74 3/16 5/8 46 4.49 5.00 13.19 10.39 12.36 5.75 6.61 1 1/2 0.39 2.13 2.36 11.14 3/16 3/4 75 4.49 5.00 13.19 10.39 13.23 6.18 7.05 2 0.39 2.13 2.36 11.14 3/16 3/4 84 4.49 5.00 13.19 10.39 15.83 7.48 8.35 3 0.39 2.13 2.36 11.14 3/16 3/4 106 4.49 6.26 14.92 12.28 14.96 6.81 8.15 2 0.47 2.13 2.40 12.32 1/4 7/8 110 4.49 6.26 14.92 12.28 17.20 7.95 9.25 3 0.47 2.13 2.40 12.32 1/4 7/8 132 4.49 6.26 14.92 12.28 19.72 9.21 10.51 4 0.47 2.13 2.40 12.32 1/4 7/8 161 5.49 7.01 18.31 14.49 18.86 7.72 11.14 2 1/2 0.47 2.13 2.36 15.24 5/16 1 1/8 209 5.49 7.01 18.31 14.49 20.87 8.74 12.13 4 0.47 2.13 2.36 15.24 5/16 1 1/8 225 Z in. Weight lb
Dimensions S2H 63 > S2H 84 Blower Size A a Bv Bh C Dv Dh dv dh E e F G S2H62 351 19 290 348 471 376 528 90 90 76.2 60 400 12 S2H63 586 18 290 442 624 376 528 90 90 76.2 60 400 12 S2H64 738 18 290 442 774 376 529 90 90 76.2 60 60 12 S2H82 464.4 24 290 442 604 480 683 110 110 101.6 70 480 12 S2H83 762 24 360 563 820 480 684 110 110 101.6 70 480 12 S2H84 962 24 360 563 1011 480 684 110 110 101.6 70 480 12 NOTE: All dimensions in millimeters unless otherwise noted Blower Size A a Bv Bh C Dv Dh dv dh E e F G S2H62 13 7/8 3/4 11 3/8 13 3/4 18 1/2 14 3/4 20 3/4 3 1/2 3 1/2 3 2 3/8 15 3/4 1/2 S2H63 23 3/4 11 3/8 17 3/8 24 5/8 14 3/4 20 3/4 3 1/2 3 1/2 3 2 3/8 15 3/4 1/2 S2H64 29 3/4 11 3/8 17 3/8 30 1/2 14 3/4 20 7/8 3 1/2 3 1/2 3 2 3/8 2 3/8 1/2 S2H82 18 1/4 1 11 3/8 17 3/8 23 3/4 18 7/8 26 7/8 4 3/8 4 3/8 4 2 3/4 18 7/8 1/2 S2H83 30 1 14 1/8 22 1/8 32 1/4 18 7/8 27 4 3/8 4 3/8 4 2 3/4 18 7/8 1/2
H hv hh Iv Ih L L1 L2 O mm S dia V W Y Z Weight kg 306.2 230 230 589 435 765 377 377 200 16 104 100 16 55 261 306.2 230 230 589 589 927 454 454 200 16 100 104 16 55 320 306.2 230 230 589 435 1080 530 530 250 16 100 104 16 55 470 419.6 318 318 778 575 1021 515 515 250 20 166 165 20 75 550 419.6 318 318 778 575 1235 618 618 300 20 165 165 20 75 665 419.6 318 318 778 575 1438 719 719 300 20 165 165 20 75 270 H hv hh Iv Ih L L1 L2 O mm S dia V W Y Z Weight lb. 12 9 9 23 1/4 17 1/8 30 1/8 14 7/8 14 7/8 7 7/8 5/8 4 4 5/8 2 1/8 576 12 9 9 23 1/4 23 1/4 36 1/2 17 7/8 17 7/8 7 7/8 5/8 4 4 5/8 2 1/8 706 12 9 9 23 1/4 17 1/8 42 1/2 20 7/8 20 7/8 9 7/8 5/8 4 4 5/8 2 1/8 1036 16 1/2 12 1/2 12 1/2 30 5/8 22 5/8 40 1/4 20 1/4 20 1/4 9 7/8 3/4 6 1/2 6 1/2 3/4 3 1213 16 1/2 12 1/2 12 1/2 30 5/8 22 5/8 48 5/8 24 3/8 24 3/8 11 3/4 3/4 6 1/2 6 1/2 3/4 3 1466
Part Descriptions S2H22 to S2H52 / S2H22N to S2H52N 1. Gear cover 2. Oil filler plug 3&9 Inlet/outlet 4. Body casting 5. Bearing greasing points 6. Drive shaft 7. Bearing cover 8. Mounting feet 10. Oil drain feet 11. Oil level sight-glass 12. External vent filter 13. Gear cover vent port A = Gear vent configuration B = Alternative gear cover vent configuration S2H63 to S2H84 / S2H63N to S2H84N 1. Gear end cover 2. Oil filler plug (gear end) 3. Lifting brackets 4&11 Inlet/Outlet 5. Oil filler plug (drive end) 6. Drive end cover 7. Drive shaft 8. Oil level sight-glass (drive end) 9. Oil drain plug (drive end) 10. Mounting feet 12. Oil drain plug (gear end) 13. Oil level sight-glass (drive end) 14. Vent filter 15. Gear end/drive end vent A = Gear end cover/drive end cover vent filters 10
All repairs and service are done in conformity with the highest industrial standards and completed by a team of experienced technicians and engineers. IR embraces its responsibilities to operate in a manner that protects the environment and human health and safety in order to support the company's long-term growth and reputation as a responsible corporate citizen. STANDARD EXCHANGE Guarantee your production capability Fast delivery: shipping of the exchange machine within one day Large range of machines ready to ship Performance certified as identical to your original machine 12-month warranty Price includes the return of your blower ON-SITE TECHNICAL SUPPORT Bring our expertise to you Service centers in France, England and Germany Installation, commissioning, service, and maintenance on-site Diagnostic and breakdown service Qualified technical service with the full support of our technical department SERVICE CONTRACTS Maximize uptime Keep costs under control Personal contract possibilities Scheduled maintenance Priority service in an outage Reduce downtime MAINTENANCE & SERVICE To your original specifications More than 100 years of technical and industrial experience Cleaning system keeping the component integrity Spare parts with supplier warranty (over 20 000 parts in stock) Available for standard service Guarantee on the quoted lead-time Similar test as a new machine Technical survey in link with our technical department Expertise and application recommendation available on demand 11
Ingersoll Rand Industrial Technologies provides products, services and solutions to enhance the efficiency and productivity of our commercial, industrial and process customers. Our innovative products include air compressors, air systems components, tools, pumps, material and fluid handling systems and microturbines. www.ingersollrand.com www.hibon.com Ingersoll Rand Air Solutions France 2 rue Jean Paul Sartre 59290 Wasquehal France Tel: (33) 03 20 45 39 39 Fax: (33) 03 20 45 39 97 Hibon Inc. (An Ingersoll Rand Company) 12055, Cote de Liesse Dorval, Quebec Canada, H9P 1B4 Tel : (514) 631-3501 Fax : (514) 631-3502 Ingersoll Rand compressors are not designed, intended or approved for breathing air applications. Ingersoll Rand does not approve specialized equipment for breathing air application sand assumes no responsibility or liability for compressors used for breathing air service. Nothing contained on these pages is intended to extend any warranty or representation, expressed or implied, regarding the product described herein. Any such warranties or other terms and conditions of sale of products shall be in accordance with Ingersoll Rand s standard terms and conditions of sale for such products, which are available upon request. Product improvement is a continuing goal at Ingersoll Rand. Designs and specifications are subject to change without notice or obligation. 2007 Ingersoll-Rand Company CCN-38451027