EX- series Illustrations show diesel engine type. A Distance between tumblers 7 00 mm B Undercarriage length 00 mm C Counterweight clearance 3 30 mm D Rear-end swing radius 0 mm D Rear-end length 0 mm E Overall width of upperstructure 70 mm F Overall height of cab 00 mm G Min. ground clearance 1 0 mm H Track gauge 00 mm I Track shoe width 1 0 mm J Undercarriage width 0 mm K Eye level height 000 mm HYDRAULIC EXCAVATOR EX000- with Diesel Engine Engine Gross Power : x 1 0 kw ( x 1 0 HP) Operating Weight : Loading Shovel : 000 kg EX000E- with Electric Motor Power Output : x 1 00 kw Operating Weight : Loading Shovel : 0 000 kg Bucket Capacity Loading Shovel Bucket : Heaped : 0.0 m 3
SPECIFICATIONS EX000- ENGINE Model... Cummins QSKTA0-CE Type... Water-cooled, -cycle,-cylinder, turbo-charged and after-cooled, direct injection chamber-type diesel engine Rated power SAE J1, gross... x 1 0 kw ( x 1 0 HP) at 1 00 min-¹ (rpm) Net... x 1 0 kw ( x 1 0 HP) at 1 00 min-¹ (rpm) Maximum torque... x 3 N m ( x 3 kgf m) at 1 00 min-¹ (rpm) Piston displacement... x 0 L Bore and stroke... 1 mm X mm Starting system... V electric motor Batteries... x V, x 0 AH Cold starting... Ether aided HYDRAULIC SYSTEM Hitachi's ETS (Electronic Total control System) can achieve maximum job efficiency by reducing fuel consumption and noise levels, while maximizing productivity through the optimization of engine-pump functions with excellent controllability increasing operator comfort. E-P Control (Computer-aided Engine-Pump Control system) Main pumps regulated by electric engine-speed sensing control system. I-OHS (Integrated Optimum Hydraulic System) main pumps and control valves and set of flow-assisting valves enable both independent and combined operations of all functions. FPS (Fuel-saving Pump System) FPS minimizes energy loss with superior performance in fine control. Auto-Idling system for saving fuel and reducing noise. Hydraulic drive cooling-fan system for oil cooler. Hydraulic drive cooling-fan system for radiator. Forced-lubrication and forced-cooling pump drive system. Main pumps... variable-displacement, axial piston pumps for front attachment, travel and swing Pressure setting.... MPa (300 kgf/cm ) Max.oil flow... 00 L/min Pilot pump... gear pump Pressure setting.... MPa ( kgf/cm²) Max.oil flow... 1 L/min Relief Valve Settings Implement circuit... Swing circuit... Travel circuit... Pilot circuit.... MPa (300 kgf/cm²). MPa (300 kgf/cm²). MPa (300 kgf/cm²). MPa ( kgf/cm²) Hydraulic Cylinders High-strength piston rods and tubes adopted. Cylinder cushion mechanisms are provided for boom, arm, bucket and dump cylinders. Stroke-end control system is provided for arm, bucket cylinders. Bucket cylinders are provided with protector. Cylinder Dimensions Loading shovel Quan. Bore Rod diameter Boom 0 mm 30 mm Arm 30 mm 70 mm Bucket 30 mm 70 mm Dump 3 mm mm Hydraulic Filters All hydraulic circuits have high-quality hydraulic filters for protection against oil contamination and longer life of hydraulic components. Qty. Full flow filter µm High pressure strainer 0 meshes (In main & swing pump delivery line) Drain filter 1 µm (For all plunger type pumps & motors) By-pass filter 1 µm (In oil cooler by-pass line) Pilot filter µm CONTROLS Implement Levers Electric joystick control levers. Right lever is for boom and bucket control, left lever for swing and arm control. pedals provided for opening/closing the bottom dump bucket. Travel Levers with Pedals Remote-controlled hydraulic servo system. Independent drive at each track allows counter rotation of tracks. 3 7 1 1 Left Console Bucket Close Pedal (For Loading Shovel) Left Control Lever/Horn Switch Bucket Open Pedal (For Loading Shovel) 3 Left Travel Pedal Pilot Control Shut-Off Lever Left Travel Lever Rear Console Right Travel Lever 1 Emergency Engine Stop Switch Right Travel Pedal 1 Engine Speed Control Dial 7 Right Control Lever/Horn Switch Key Switch Right Console Monitor Display Operator s Seat 1 1 Revolving Frame A deep, full-reinforced box section. Heavy-gauge steel plates used for ruggedness. Deck Machinery Maintenance accessibility is the major feature in the layout of deck machinery. Folding stairs provides easy access to the deck machinery. And also the side walk provides easy access to engines, hydraulic and electrical components. 1 Engine 1 Center Joint Engine Radiator 1 Cab 3 LTA Radiator Air Filter Hydraulic Pump Muffler Engine-Pump Bulkhead 1 Folding Stairs Hydraulic Oil Tank 1 Fan Motor x 7 Fuel Tank 0 Battery Unit Control Valve 1 Reserve tank (engine oil) x High-Pressure Strainer Reserve tank (coolant) x Hydraulic Oil Cooler 3 Punp mission oil cooler x Hydraulic Oil Cooling Fan Motor 3 Fuel cooler x Lubricator Engine room Cooling Fan x Swing Device 3 3 1 1 1 0 1 1 1 1 1 1 1 1 7 3 3 3 3 Swing Device high-torque, axial-piston motors with two-stage planetary gear bathed in oil. Swing circle with dirt seals is a heavy-duty, triple-row, cylindrical roller bearing. Induction-hardened internal swing circle gear and pinion immersed in lubricant. Parking brake of springset/hydraulic-released disc type. This parking brake in manually releasable. Swing speed... 3. min-¹ (rpm) Operator's Cab The sturdy cab, with the top guard conforming to OPG Level (ISO), helps protect the operator from falling objects. 1 00 mm width, 3 30 mm length, 10 mm height, roomy cab with tinted-glass windows features all-round visibility. Multi-Display (color LCD. inch) for centralized information of machine status. Color monitor cameras for rear, right side, left lower views. Pressurized 3 air conditioning system. Noise level... 7 db(a) in the cab; on max. engine speed under no-load condition. Eye level height... 000 mm 3
SPECIFICATIONS EQUIPMENT EX000- LOADING SHOVEL ATTACHMENTS STANDARD EQUIPMENT Standard equipment may vary by country, so please consult your Hitachi dealer for details. Tracks Shovel-type undercarriage. Dual-flanged-type bolt linkage for side frame and X-form center frame assures durability. Heavy-duty track frame of all-welded, stress-relieved structure. Top-grade materials used for toughness. Lifetime-lubricated induction-hardened track rollers, idlers and drive tumblers with floating seals. Specially heat-treated connection pins. Hydraulic track adjuster provided with N gas accumulator with relief valve. Track adjuster provided with protection device against abnormal tension. Travel motion alarm device. Shovel-type Undercarriage Triple grouser shoes specially heat treated cast steel. Shoe width... 1 0 mm Numbers of Rollers and Shoes (Each Side) Upper rollers... 3 Lower rollers... 7 Track shoes... 3 Travel Device Each track driven by high-torque, axial piston motors, allowing counter rotation of tracks. -stage planetary gear plus spur gears reduction device. Dual-support-type traction device. Parking brake of springset/hydraulic-released disc type. This parking brake can be manually releasable. Travel speeds... High : 0 to.0 km/h Low : 0 to 1. km/h Maximum traction force... 3 000 kn (30 000 kgf) Gradeability... 0 % (30 degree) max. WEIGHTS AND GROUND PRESSURE Loading Shovel Equipped with 0.0 m 3 (heaped) bottom dump bucket. Shoe type Shoe width Operating weight Ground pressure Triple kpa 1 0 mm 000 kg grousers (. kgf/cm ) SERVICE REFILL CAPACITIES litters Fuel tank 1 00 Engine coolant x 1 Engine oil Engine oil pan x 0 Reserve tank x 0 Pump transmission device x Swing device x 7 Hydraulic system 700 Hydraulic oil tank 3 0 Travel device x 0 Boom and arm are of all-welded, low-stress, high-tensile strength steel full-box section design. WORKING RANGES Meter 0 1 1 0 7 E F E' 0 1 EH000 C 1 H D B G A 0 Meter Ground Line A Min. digging distance 7 00 B Min. level crowding distance 0 C Level crowding distance 00 D Max. digging reach 1 00 E Max. cutting height 0 00 E Max. dumping height 00 F Max. digging depth 0 G Working radius at max. dumping height 00 H Max. bucket opening width 00 Crowding force 70 kn (3 000 kgf) Breakout force 30 kn (7 000 kgf) Bucket (heaped) Capacity Width No.of teeth Weight 0.0 m 3 00 mm 00 kg Type Bottom dump type general purpose ENGINE A alternator Heavy-duty type air cleaner with dust ejector Cartridge-type engine oil filter Cartridge-type engine oil bypass filter Cartridge-type fuel filter Water filter Fan guard lsolation-mounted engine Pre-lubrication system Auto-idle system Emergency engine stop system Hydraulic drive cooling-fan system Engine oil reserve system Engine room cooling fan HYDRAULIC SYSTEM E-P control system I-OHS(lntegrated Optimum Hydraulic System) FPS(Fuel-saving Pump System) Hydraulic drive cooling-fan system Forced-lubrication and forced cooling pump drive system Control valve with main relief valve Suction filter Full-flow filter Bypass filter Pilot filter Drain filter High-pressure strainer CAB The sturdy cab, with the top guard conforming to OPG Level ll (ISO), helps protect the operator from falling objects. AII-weather sound-suppressed steel integrated cab. Fluid-filled elastic mounts. Laminated glass windshield. Reinforced/tinted(green color)glass side windows. Parallel-link-type intermittent windshield wiper. Front windshield washer. Main-display with various meters, pilot indicators, and warning indicators. Air suspension seat with automatic weight adjusting function. Wrist control type electric lever with hight adjusting function. Electric travel pedals. Electric bucket open/close pedals. LED type room lamps. Footrest. Air horn with electric compressor. Auto-tuning AM-FM radio with digital clock. Seat belt. Hot&cool-box. Utility space 1 0 mm 1 00 mm Floor mat. Air conditioner with defroster. Rearview mirror. Evacuation hammer. Emergency escape device. Trainer's seat. Pilot control shut-off lever. MONITOR SYSTEM Meters, pilot indicators, and warning indicators are displayed on the main display. Meters: Coolant temperature gauge Tachometer Engine oil pressure gauge Engine oil temperature gauge Hour meter Fuel gauge Battery voltage gauge Hydraulic oil temperature gage Ambient temperature Pilot indicator (Green): Coolant level check Engine oil level (oil pan) check Engine oil level (reserve tank) check Hydraulic oil level check Prelub Auto-lubrication Auto-idle Travel mode Warning indicator (Red): Alternator Pump transmission oil level Engine stop Engine oil pressure Coolant overheat Coolant level Engine over run Fuel temperature Exhaust temperature Hydraulic oil level Auto-lubrication Stop valve Electric lever Fast-filling Emergency engine stop Tension Warning indicator (Yellow): Engine oil pressure Coolant overheat Coolant level Fuel temperature Engine warning Exhaust temperature Air cleaner restriction Stairway position Hydraulic oil overheat Pump contamination Electrical equipment box Alarm buzzers Pump transmission oil level Hydraulic oil level Stop valve Electric lever Fast-filling Stairway position DATA LOGGING SYSTEM DLU (Data-logging unit) continuously records performance of engine and hydraulic system. The record can be down-loaded dy PC and PDA. LIGHTS High brightness working lights entrance lights maintenance lights Lockable machine covers 0 000 kg counterweight Hydraulic drive grease gun with hosereel Swing parking brake Electric oil pump to draw hydraulic oil from suction and return pipe lines Folding stairs for going up and down Travel parking brake Travel motion alarm device Hydraulic track adjuster with Ngas accumulator and relief valve 1 0 mm triple grouser shoes Single-frange rollers MISCELLANEOUS Standard tool kit Stairs and handrails (Meeting lso) Recirculation air filter for air conditioner Ventilation air ailter for air conditioner V power terminal board Stop valve for transport and reassembly Auto-lubrication system (Lincoln) for front-attachment pins, swing bearing and center joint. FAST FILLING SYSTEM Fast-filling system (Wiggins) for fuel, hydraulic oil, coolant, swing device oil, pump mission oill, engine oil, and grease (couplers not included) OPTIONAL EQUIPMENT Upper slider Travel motor guard Travel device guard Electric crane ( V DC) Optional equipment may vary by country, so please consult your Hitachi dealer for details. Fast-filling couplers Satellite data transmitting system Additional air horn (Right side) Grease tank transfer (Oil cooler room) Color monitor cameras for rear, right side, left lower views.
SPECIFICATIONS EX000E- ELECTRIC MOTOR High Voltage, Three Phase, Squirrel Cage Induction Motor, Totally Enclosed Air-to-Air-Cooled (TEAAC). Type... HITACHI TFOA-KK Rating Rated continuous output... 1 00 kw x Voltage... AC 000-00 V / 0 Hz AC 00-00 V / 0 Hz Number of poles... Synchronous RPM... 1 00 min -1 / 0 Hz 1 00 min -1 / 0 Hz Rated current... A x @ 00 V Insulation class... F class B raise Space heater included. Thermo-guard (temperature detector) Starting condition... Reactor 0 % tap HYDRAULIC SYSTEM I-OHS (Integrated Optimum Hydraulic System) main pumps and control valves and set of flow-assisting valves enable both independent and combined operations of all functions. Hydraulic drive cooling-fan system for oil cooler. Hydraulic drive cooling-fan system for radiator. Forced-lubrication and forced-cooling pump drive system. Main pumps... variable-displacement, axial piston pumps for front attachment, travel and swing Pressure setting.... MPa (300 kgf/cm ) Max.oil flow... 00 L/min Pilot pump... gear pump Pressure setting.... MPa ( kgf/cm²) Max.oil flow... 1 L/min Relief Valve Settings Implement circuit... Swing circuit... Travel circuit... Pilot circuit.... MPa (300 kgf/cm²). MPa (300 kgf/cm²). MPa (300 kgf/cm²). MPa ( kgf/cm²) Cylinder Dimensions Loading shovel Quan. Bore Rod diameter Boom 0 mm 30 mm Arm 30 mm 70 mm Bucket 30 mm 70 mm Dump 3 mm mm Hydraulic Filters All hydraulic circuits have high-quality hydraulic filters for protection against oil contamination and longer life of hydraulic components. Qty. Full flow filter µm High pressure strainer 0 meshes (In main & swing pump delivery line) Drain filter 1 µm (For all plunger type pumps & motors) By-pass filter 1 µm (In oil cooler by-pass line) Pilot filter µm CONTROLS Implement Levers Electric joystick control levers. Right lever is for boom and bucket control, left lever for swing and arm control. pedals provided for opening/closing the bottom dump bucket. Travel Levers with Pedals Remote-controlled hydraulic servo system. Independent drive at each track allows counter rotation of tracks. 3 1 Revolving Frame A deep, full-reinforced box section. Heavy-gauge steel plates used for ruggedness. Deck Machinery Maintenance accessibility is the major feature in the layout of deck machinery. Folding stairs provides easy access to the deck machinery. And also the side walk provides easy access to motors, hydraulic and electrical components. 7 1 1 1 1 1 1 1 1 3 1 Swing Device high-torque, axial-piston motors with two-stage planetary gear bathed in oil. Swing circle with dirt seals is a heavy-duty, triple-row, cylindrical roller bearing. Induction-hardened internal swing circle gear and pinion immersed in lubricant. Parking brake of spring-set/ hydraulic-released disc type. This parking brake in manually releasable. Swing speed.... min-¹ (rpm) Operator's Cab The sturdy cab, with the top guard conforming to OPG Level (ISO), helps protect the operator from falling objects. 1 00 mm width, 3 30 mm length, 10 mm height, roomy cab with tinted-glass windows features all-round visibility. Multi-Display (color LCD. inch) for centralized information of machine status. Color monitor cameras for rear, right side, left lower views. Pressurized 3 air conditioning system. Eye level height... 000 mm Hydraulic Cylinders High-strength piston rods and tubes adopted. Cylinder cushion mechanisms are provided for boom, arm, bucket and dump cylinders. Stroke-end control system is provided for arm, bucket cylinders. Bucket cylinder is provided with protector. 7 1 1 0 1 3 1 1 1 Left Console Bucket Close Pedal (For Loading Shovel) Left Control Lever/Horn Switch Bucket Open Pedal (For Loading Shovel) 3 Left Travel Pedal Pilot Control Shut-Off Lever Left Travel Lever Rear Console Right Travel Lever 1 Emergency Motor Stop Switch Right Travel Pedal 1 Key Switch 7 Right Control Lever/Horn Switch Monitor Display Right Console Operator s Seat 1 Main Motor x Cubicle Coupler x Control Valve x 3 Pump Drive Unit x 1 Swing Device x Hydraulic Pump x 1 Slip Ring Hydraulic Oil Cooling Fan Motor x 3 Center Joint Hydraulic Oil Cooler x x 3 High-Pressure Strainer x 7 Lubricator 1 Battery x Pump Transmission Oil Cooler x 1 Cab Motor-Pump Bulkhead x 0 Folding Stairs Bulkhead x 1 Cab Heater Unit Hydraulic Oil Tank
SPECIFICATIONS EQUIPMENT EX000E- LOADING SHOVEL ATTACHMENTS STANDARD EQUIPMENT Standard equipment may vary by country, so please consult your Hitachi dealer for details. Tracks Shovel-type undercarriage. Dual-flanged-type bolt linkage for side frame and X-form center frame assures durability. Heavy-duty track frame of all-welded, stress-relieved structure. Top-grade materials used for toughness. Lifetime-lubricated induction-hardened track rollers, idlers and drive tumblers with floating seals. Specially heat-treated connection pins. Hydraulic track adjuster provided with N gas accumulator with relief valve. Track adjuster provided with protection device against abnormal tension. Travel motion alarm device. Shovel-type Undercarriage Triple grouser shoes specially heat treated cast steel. Shoe width... 1 0 mm Numbers of Rollers and Shoes (Each Side) Upper rollers... 3 Lower rollers... 7 Track shoes... 3 Travel Device Each track driven by high-torque, axial piston motors, allowing counter rotation of tracks. -stage planetary gear plus spur gears reduction device. Dual-support-type traction device. Parking brake of springset/hydraulic-released disc type. This parking brake can be manually releasable. Travel speeds... High : 0 to 1. km/h Low : 0 to 1.3 km/h Maximum traction force... 3 000 kn (30 000 kgf) Gradeability... 0 % (30 degree) max. WEIGHTS AND GROUND PRESSURE Loading Shovel Equipped with 0.0 m 3 (heaped) bottom dump bucket. Shoe type Shoe width Operating weight Ground pressure Triple kpa 1 0 mm 0 000 kg grousers (.7 kgf/cm ) SERVICE REFILL CAPACITIES litters Pump transmission device x Swing device x 7 Hydraulic system 700 Hydraulic oil tank 3 0 Travel device x 0 Boom and arm are of all-welded, low-stress, high-tensile strength steel full-box section design. WORKING RANGES Meter 0 1 1 0 7 E F E' 0 1 EH000 A Min. digging distance 7 00 B Min. level crowding distance 0 C Level crowding distance 00 D Max. digging reach 1 00 E Max. cutting height 0 00 E Max. dumping height 00 F Max. digging depth 0 G Working radius at max. dumping height 00 H Max. bucket opening width 00 Crowding force 70 kn (3 000 kgf) Breakout force 30 kn (7 000 kgf) Bucket (heaped) Capacity Width C 1 H D No.of teeth B G A Weight 0.0 m 3 00 mm 00 kg 0 Meter Ground Line Type Bottom dump type general purpose ELECTRIC MOTOR Space heater included Thermo-guard (temperature detector) HYDRAULIC SYSTEM I-OHS(lntegrated Optimum Hydraulic System) Hydraulic drive cooling-fan system Forced-lubrication and forced cooling pump drive system Control valve with main relief valve Suction filter Full-flow filter Bypass filter Pilot filter Drain filter High-pressure strainer CAB The sturdy cab, with the top guard conforming to OPG Level ll (ISO), helps protect the operator from falling objects. AII-weather sound-suppressed steel integrated cab. Fluid-filled elastic mounts. Laminated glass windshield. Reinforced/tinted(green color)glass side windows. Parallel-link-type intermittent windshield wiper. Front windshield washer. Main-display with various meters, pilot indicators, and warning indicators. Air suspension seat with automatic weight adjusting function. Wrist control type electric lever with hight adjusting function. Electric travel pedals. Electric bucket open/close pedals. LED type room lamps. Footrest. Air horn with electric compressor. Auto-tuning AM-FM radio with digital clock. Seat belt. Hot&cool-box. Utility space 1 0 mm 1 00 mm Floor mat. Air conditioner with defroster. Color monitor cameras for rear, right side, left lower views. Rearview mirror. Evacuation hammer. Emergency escape device. Trainer's seat. Pilot control shut-off lever. MONITOR SYSTEM Meters: Hour Meter Main Motor Coil Temperature Gauge (R) Main Motor Coil Temperature Gauge (L) Main Motor Ammeter (R) Main Motor Ammeter (L) Main Motor Voltmeter (R) Main Motor Voltmeter (L) Clock Battery Voltage Gauge Hydraulic Oil Temperature Gauge Ambient Temperature Pilot lamps (Green): Main Motor Run (R) Main Motor Run (L) Travel Mode Warning lamps: (Red): Pump Transmission Oil Level (R) Pump Transmission Oil Level (L) AC00V Power Source Cubicle Box Hydraulic Oil Level Auto-Lubrication Stop Valve 3E Relay (R) 3E Relay (L) Main Motor Overheat (R) Main Motor Overheat (L) Main Motor Start Congestion (R) Main Motor Start Congestion (L) ACV Power Source Battery Charge Electric Lever Emergency Motor Stop Tension Cable Drum Warning lamps: (Yellow): Electrical Equipment Box Stairway Position Hydraulic Oil Overheat Pump Contamination Cab.heator Warning lamps: (Amber): Fast-Filling Alarm buzzers: AC00V Power Source Cubicle Box Hydraulic Oil Level Stop Valve Stairway Position Pump Transmission Oil Level (R) (L) 3E Relay (R) (L) Main Motor Overheat (R) (L) Main Motor Start Congestion (R) (L) ACV Power Source Electric Lever Cable Drum Fast-Filling DATA LOGGING SYSTEM DLU (Data-logging unit) continuously records performance of the hydraulic system. The record can be down-loaded dy PC and PDA. LIGHTS High brightness working lights entrance lights maintenance lights Lockable machine covers 0 000 kg counterweight Hydraulic drive grease gun with hosereel Swing parking brake Electric oil pump to draw hydraulic oil from suction and return pipe lines Folding stairs for going up and down Travel parking brake Travel motion alarm device Hydraulic track adjuster with Ngas accumulator and relief valve 1 0 mm triple grouser shoes Single-frange rollers MISCELLANEOUS Standard tool kit Stairs and handrails (Meeting lso) Recirculation air filter for air conditioner Ventilation air ailter for air conditioner V power terminal board Stop valve for transport and reassembly Auto-lubrication system (Lincoln) for front-attachment pins, swing bearing and center joint. FAST FILLING SYSTEM Fast-filling system (Wiggins) for fuel, hydraulic oil, coolant, swing device oil, pump mission oill, engine oil, and grease (couplers not included) OPTIONAL EQUIPMENT Optional equipment may vary by country, so please consult your Hitachi dealer for details. Upper slider Travel device guard Electric crane ( V DC) Fast-filling couplers Satellite data transmitting system Additional air horn (Right side) Grease tank transfer (Oil cooler room)
TRANSPORTATION Illustrations show diesel engine type. Easily assembled owing to local assembling system requiring no welding. Cab assembly Weight : 3 0 kg Intake, exhaust device Weight : 1 0 kg Watertank Weight : 0 kg Weight : kg Weight : kg Weight : 3 kg Weight : 1 kg Weight : kg Weight : kg Weight : 1 kg 3 370 3 30 3 0 0 7 3 01 1 0 1 730 0 3 3 30 3 1 0 1 0 1 300 1 1 330 1 330 1 0 Width : 1 0 Width : 0 Width : Width : 1 0 Width : Width : 700 Width : Width : Width : 1 30 Width : 1 00 Weight : kg Weight : 30 kg Weight : 71 kg Weight : 1 kg Weight : 7 kg Weight : 1 kg Weight : 0 kg Main frame assembly Weight : 7 00 kg Oil tank assembly Weight : 0 kg 1 30 030 1 0 3 0 0 1 3 1 0 1 00 1 3 1 30 1 0 1 3 3 7 0 3 70 Width : 0 Width : 37 Width : 73 Width : 700 Width : 7 Width : 1 Width : 7 Width : 000 Width : 1 Weight : 73 kg Engine unit (left) Weight : 3 00 kg Batterybox Weight : 1 0 kg Weight : kg Fuel tank assembly Weight : 7 00 kg assembly Weight : kg assembly Weight : kg Weight : 31 kg Weight : kg 1 0 1 70 70 3 0 70 30 3 0 1 0 730 070 1 00 3 370 3 3 370 30 1 3 030 1 30 Width : 73 Width : Width : 1 0 Width : Width : Width : Width : Width : 7 Width : 3 Ladderbox Weight : kg Ladder Weight : 7 kg Weight : 1 kg Weight : kg Weight : kg Hydraulic-oil suction device Weight : kg Ladder Weight : kg Weight : kg Weight : 7 kg Weight : kg 1 0 1 00 3 0 1 370 1 0 1 70 70 00 1 0 1 70 7 1 30 3 1 3 0 1 30 Width : 1 70 Width : 1 0 Width : 7 Width : Width : 700 Width : Width : Width : Width : 1 030 Width : 73
TRANSPORTATION Engine unit (right) Weight : 00 kg Intake, exhaust device Weight : 1 70 kg Grease tank Weight : 1 00 kg Water tank Weight : 0 kg Weight (right) Weight : 0 kg Weight (left) Weight : 0 kg Weight : 1 kg Weight : kg 0 0 3 0 30 3 0 0 1 0 1 330 7 1 0 70 70 1 0 1 3 Width : 00 Width : 0 Width : 1 10 Width : Width : Width : Width : 3 Width : 7 Weight : 301 kg Weight : kg Weight : 33 kg Weight : kg Weight : 0 kg Weight : 7 kg Weight : 1 kg Counter weight (right) Weight : 00 kg Counter weight (left) Weight : 00 kg 000 1 0 70 1 0 00 1 0 0 0 1 0 0 1 3 0 00 1 70 00 1 70 Width : 7 Width : 7 Width : Width : 7 Width : 77 Width : 7 Width : 3 Width : 1 30 Width : 1 0 Return piping assembly Weight : 1 kg Weight : 71 kg Weight : 1 kg Weight : 73 kg Weight : 7 kg 0 1 0 1 0 0 1 1 3 1 0 1 300 1 00 Width : 31 Width : 370 Width : Width : 73 Width : 700 Weight : 7 kg Weight : kg Weight : 3 kg Weight : 30 kg Weight : 3 kg 0 0 0 1 3 Width : 77 Width : 3 Width : Width : 3 Width :
370 TRANSPORTATION LOADERL ATTACHMENTS Weight : kg Weight : kg Weight : 3 kg Weight : kg Weight : kg Weight : 0 kg Weight : 33 kg Weight : 33 kg Weight : 0 kg 30 70 30 7 30 1 0 30 7 0 1 03 1 0 0 0 1 0 Width : Width : Width : Width : Width : 3 Width : Width : 7 Width : 7 Width : Moter cover stay Weight : 1 kg Weight : 3 kg Ladder Weight : kg Track side frames Weight : 3 00 kg x Boom assembly Weight : 7 00 kg Arm assembly Weight : 31 0 kg Boom cylinders Weight : 70 kg x 0 3 0 30 0 330 7 0 0 00 0 1 Width : Width : 1 Width : Width : 1 Width : 3 Width : 3 0 Width : 70 Track links Weight : A set : 0 kg x 1 Weight : B set : 30 kg x Travel devices Weight : 00 kg x Track frame assembly Weight : 0 000 kg Valve brakes Weight : 0 kg x Arm cylinders Weight : 00 kg x Bucket cylinders Weight : 300 kg x Rear bucket assembly Weight : 3 00 kg Front bucket assembly Weight : 00 kg 1 0 0 1 0 00 1 0 1 0 00 30 7 0 3 30 703 0 1 00 3 0 3 30 Width : 0 Width : 1 70 Width : 7 Width : Width : 7 Width : 1 070 Width : 0 Width : 30 s Weight : kg x s Weight : kg x s Weight : kg x Swing circle Weight : 000 kg s Weight : kg x Shrouds Weight : 3 kg x Teeth Weight : 3 kg x 770 0 0 0 770 70 3 30 30 0 71 0 7 33 3 70 Width : 0 Width : 0 Width : 0 Width : 70 Width : 1 Width : Width : 30 1 1
These specifications are subject to change without notice. Illustrations and photos show the standard models, and may or may not include optional equipment, accessories, and all standard equipment with some differences in color and features. Before use, read and understand the Operator s Manual for proper operation. Hitachi Construction Machinery Co., Ltd. www.hitachi-c-m.com KS-EN3 0.0 (KA/KA,FT3) Printed in Japan