EJC B12-B20 / EJC

Similar documents
EJC B14-B16 / EJC

EJC B12-B16 / EJC

ETV 318 / 320 / 325 and ETM 325

Light-Duty And Heavy-Duty Walkie Stackers. Capacity: 2,200-3,500 lb

EFG 540k S50. Electric Four-Wheel Counterbalanced Trucks (8,000 11,000 lbs.) Broad capacity range for enhanced flexibility

EFG 425 S30. Electric Four-Wheel Counterbalanced Trucks (5,000 6,500 lbs.)

EJE 120 / 225 Electric Walkie Pallet Truck. 4,500 / 6,000 lbs. capacity

ES 4000 SERIES. Specifications Walkie Fork Over Stacker

7 reasons. a c ts. productivity and safety of your material handling operations. why Godrej Electric Stacker is the right choice to improve

PANTOGRAPH REACH TRUCK 3,000-4,500 LB CAPACITY A NEW LEVEL OF PERFORMANCE IS WITHIN YOUR REACH

TAKE A LOAD OFF 6000 lb. Capacity Regenerative Braking

PANTOGRAPH REACH TRUCK 3,000-4,500 LB CAPACITY A NEW LEVEL OF PERFORMANCE IS WITHIN YOUR REACH

SERIOUS PERFORMANCE KG CAPACITY PANTOGRAPH REACH TRUCKS

EFFICIENCY, WITHIN REACH

7-SERIES ORDER PICKER REACH NEW HEIGHTS

EVERYDAY HIGH H PERFORMER

EVERYDAY HIGH PERFORMER

3,000 6,000 LB CAPACITY ELECTRIC WALKIES

DRAFT 6. Electric Counterbalanced Trucks 4,500 to 7000 lb. Capacity

Electric Reach Trucks HYUNDAI HEAVY INDUSTRIES

ES 4000 SERIES. Specifications Pedestrian Stacker with Initial Lift

EKX Electric Turret Truck ( lbs.) Versatile design with modular construction and intelligent truck management system

Electric Counterbalance Trucks HYUNDAI FORKLIFT

SX 12/16. Electric stacker trucks kg kg.

Electric power steering provides precise manuverability in confined work enviroments where cube utilization is at a premium.

*Photo may include optional equipment. 15/18/20BT-7 AC. FORKLIFT TRUCKS Environment Friendly

ST 3000 SERIES. Specifications Stackers

SRX Series. Single & Double Reach Trucks. 36 Volt AC-Powered 3,500 & 4,500 lbs. Capacities I Single Reach 3,000 lbs. Capacity I Double Reach

SRX Series. Single & Double Reach Trucks. 36 Volt AC-Powered 3,500 & 4,500 lbs. Capacities I Single Reach 3,000 lbs. Capacity I Double Reach

HYUNDAI 20B-7 ELECTRIC SEATED 2, ,440 3,300 4,724/576 1,513/1,787. SE 200/ x6-8 2x/ ,780

15/18/20BT-7 AC FORKLIFT TRUCKS Environmentally - Friendly

REACH TRUCK REACH NEW HEIGHTS

WALKIE STACKER REACH NEW HEIGHTS

*Some of the photos may include optional equipment. North America Only. Forklift Trucks Environmentally - Friendly 20/25/30/32BC-7 AC

6-SERIES ORDER PICKER

EUROTRADING MORTIER Torhoutbaan ICHTEGEM Tel Fax

3,000-5,500 lb CapaCity Stand-Up End Control lift trucks

Walkie End Riders WR 30/40 series Capacity: ton

DT 3000 SERIES. Specifications Double Stacker

MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES

MOVING YOU FURTHER HYUNDAI MATERIAL HANDLING. Electric Counterbalance Trucks Rev. 6 PLEASE CONTACT

ES 4000 SERIES. Specifications Pedestrian Stacker

ET 4000 SERIES. Specifications Rider Stacker with Initial Lift

Technical Data for 15/18/20/23BRP-9 I1 General Information

SX 3000 SERIES. Specifications Stackers

AC_new_en :07 Pagina 1. Photo may include optional equipment. 35/40/45/50B-7 AC. FORKLIFT TRUCKS Environmental - Friendly

DRAFT 6. Electric Counterbalanced Trucks 7,500 to 11,000 lb. Capacity

FR Series FR15K/FR18K/FR23K NARROW AISLE SINGLE & DOUBLE REACH. The Forklift With Proven Ability. 3,000 to 4,500 lb Capacity. Advanced AC Technology

SHR 5500 SERIES. Specifications Heavy-Duty Walkie Reach Stacker

EUROTRADING MORTIER Torhoutbaan ICHTEGEM Tel Fax

MOVING YOU FURTHER HYUNDAI MATERIAL HANDLING

n Photo may include optional equipment HYUNDAI LPG FORKLIFT TRUCKS - Applied Tier 4 Engine 35L/40L/45L/50L-7A

WSX12/14 WSXD20. Electric Stacker Trucks kg kg kg.

35/40/45/50B-7 AC FORKLIFT TRUCKS Environmentally - Friendly

Electric Pneumatic Tire Lift Trucks. Capacity: 3,000-4,000 lb

DESIGNED FOR PRODUCTIVITY 3.0 / 4.0 T CAPACITY (2700 / 3600 KG) WALKIE END RIDERS

Electric Reach Trucks HYUNDAI HEAVY INDUSTRIES

POWER AND PERFORMANCE 2,500 4,000 LB. CAPACITY ELECTRIC PNEUMATIC TIRE LIFT TRUCKS

Building a better future. HYUNDAI LPG FORKLIFT TRUCKS Applied Tier 4 Engine 15/18/20L-7M

Hyundai Warehouse Equipment

WP 3000 SERIES. Specifications Pedestrian Pallet Truck

6-SERIES ELECTRIC ORDER PICKER

REAL POWER. REAL SOLUTIONS. 3,000 4,000 LB. CAPACITY 3-WHEEL ELECTRIC PNEUMATIC TIRE LIFT TRUCKS

Specifications. SHR 5500 Series. Heavy-Duty Walkie Reach Stacker SHR Series

SRX Platinum Series. 3,000/3,500/4,500 lb. Capacities. Rider Reach, Rider Double Reach / AC-Powered Models

Building a better future. HYUNDAI LPG FORKLIFT TRUCKS Applied Tier 4 Engine 15/18/20L-7M

WP15 WPX18 WPX20 Electric Low Lift Trucks kg kg kg

Hyundai Warehouse Equipment

2,500-4,500 lb Capacity. 36 Volt Electric Reach Trucks

MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. Electric Counterbalance Trucks. *Photo may include optional equipment.

POWER AND PERFORMANCE 2,500 4,000 LB. CAPACITY ELECTRIC PNEUMATIC TIRE LIFT TRUCKS

Technical Data for 15/18/20BCS-9

Specifications. WT 3000 Series. Rider Pallet Truck WT 3000

Electric Man-Down Turret Truck Capacity up to 1350 kg A SERIES 5022

ES10-10ES/ES10-22DM ES10-10MM/ES10-22MM ES12-12ES/ES12-25DM ES12-12MM/ES12-25MM Electric Stacker 1.0/1.2t. EP EQUIPMENT CO.,LTD

S e r i e s R e a c h - F o r k Tr u c k. The best... got better.

Electric Straddle Stacker Capacity 1400 & 1600 kg L14/16AS AS AP & AS SP SERIES 131

Some of the photos may include optional equipment. HYUNDAI LPG/GASOLINE FORKLIFT TRUCKS Applied Tier 4 Engine 25/30/33L-7A

9 (229) 22 (559) or 24 (610) or 27 (686) 10 Lowered in (mm) 10 No Load %

PX20/PPX20. Electric Low Lift Trucks kg.

Electric Counterbalance Trucks HYUNDAI HEAVY INDUSTRIES

Electric Pneumatic Tire Lift Trucks. Capacity: 3,000-4,000 lb

VF Series Electric Forklift Trucks with AC Technology 1,600kg, 1,800kg and 2,000kg

ET 4000 SERIES. Specifications Rider Stacker

Electric Counterbalance Trucks HYUNDAI HEAVY INDUSTRIES

N30-45ZR 2 /ZDR 2 SERIES TECHNICAL GUIDE

4,500 2,000 2,000 9,891 / 1,188 2,779 / 3, x 16 x 12pr x 12 x 12pr 1,140 2, x 150 x 1,220 1, / / 450.

10/13/14/15/18BR-7 AC 20/25BR-7 AC

Some of the photos may include optional equipment. HYUNDAI LPG FORKLIFT TRUCKS Applied Tier 4 Engine 25LC/30LC-7M 25GC/30GC-7M

seated 4,500 2,000 2,000 6,579 9,891 / 1,188 2,779 / 3, x 16 x 12pr 7.00 x 12 x 14pr 7.00 x 12 x 12pr 1,282 1,140 1,140 8 / 10 2,220

Counterbalanced Electric Three-Wheel ERP-VC

ST 3000 SERIES. Profile Sheet Stackers

25L/30/33L-7M 25G/30/33G-7M

Some of the photos may include optional equipment. HYUNDAI LPG FORKLIFT TRUCKS Applied Tier 4 Engine 60L/70L-7A

Electric Sit-down Reach Truck 1.6/2.0t CQD16NRVF/CQD16NRV/CQD16RVF CQD16RV/CQD20RVF/CQD20RV. EP EQUIPMENT CO.,LTD

Reach Trucks. The Complete Lineup

7HBW23 MAIN VEHICLE SPECIFICATIONS

FU-X/FS-X Technical Data.

@ EXV Technical Data High Lift Pallet Truck EXV 10 EXV 12 EXV 14 EXV 16 EXV 20

DESIGNED FOR TOP PERFORMANCE

Transcription:

Powerful, low-maintenance AC drive motor Proportional hydraulic controls allow for precise placement of loads Lift heights up to 17 feet with excellent residual capacities Easily maneuvered in tight and confined spaces EJC B12-B20 / EJC 214-220 Electric Walkie Straddle And Fork-Over Stackers (2,600-4,400 lbs.) The electric walkie stackers feature high residual capacity and are designed for medium- to heavy-duty, multi-level stacking applications. The strong, thick steel frame chassis and solid steel baselegs provide unmatched durability and strength for years of dependable use. When combined with standard caster wheels, the well-engineered design ensures excellent stability and high residual lift capacities up to 210 inches. Equipped with a powerful, 1.6 kw drive motor, the stacker can travel up to 3.6 mph even with a full load, while the impressive 3 kw hydraulic motor effortlessly lifts rated loads to their full lift heights. The long, low-mounted control handle maximizes the distance between the operator and the chassis, reducing the amount of effort to maneuver the truck. The control handle is side-mounted, providing improved visibility of the load from the operating position. These walkie stackers are also equipped with proportional hydraulics as a standard feature, allowing fragile goods to be precisely stacked and deposited gently on the floor or in racking. The operator can control all hydraulic functions with the multi-function control handle without having to reach to the chassis.

Technical Data Characteristics Weights Wheels, Chassis Dimensions Performance Motors 1.1 Manufacturer Jungheinrich 1.2 Model EJC B12 1.3 Drive electric 1.4 Type walkie straddle stacker 1.5 Load capacity / rated load Q lbs kg 2,600 1,200 1.6 Load center distance c in mm 24 600 1.9 Wheelbase y in mm 52.7 1,339 2.1 Service weight including battery (see line 6.5) lbs kg 2,350 1,065 2.2 Axle loading loaded, front / rear lbs kg 1,745 / 3,205 800 / 1,465 2.3 Axle loading unloaded, front / rear lbs kg 1,610 / 740 730 / 335 3.1 Tires PU (polyurethane) 3.2 Tire size, drive in mm 9.1 x 2.8 230 x 70 3.3 Tire size, load in mm 3.3 x 3.0 85 x 75 Tire size, caster in mm 4.9 x 2.4 140 x 57 3.5 Wheels number, drive / caster / load 1 / 1 / 4 4.2 Overall lowered height (OAL) h 1 in mm 77 1,950 4.3 Free-lift h 2 in mm 4 100 4.4 Maximum fork height (MFH) h 3 in mm 114.2 2,970 4.5 Overall extended height (OAE) h 4 in mm 165 4,200 4.9 Handle height in drive position, minimum / maximum h 14 in mm 33.5 / 51.4 850 / 1,305 4.15 Lowered fork height h 13 in mm 2.75 70 Overall length, to tip of baseleg in mm 71.1 1,810 4.19 Overall length l 1 in mm 77 1) 2) 1) 2) 1,955 4.20 Length to fork face, headlength l 2 in mm 31.7 1) 805 1) Overall baseleg width b 1 in mm 43.3 / 50 / 57.9 1,100 / 1,270 / 1,470 4.22 Fork dimensions, thickness / width s / e in mm 1.6 / 3.9 40 / 100 Overall chassis width b 2 in mm 31.5 800 4.24 Fork carriage width b 3 in mm 31.5 800 4.25 Width across forks, minimum / maximum b 5 in mm 12.4 / 27.8 316 / 706 Baseleg opening width (BLO) b 4 in mm 35.4 / 42.1 / 50 900 / 1,070 / 1,270 4.31 Ground clearance, under mast (loaded) m 1 in mm 1.6 40 4.32 Ground clearance, center of wheelbase m 2 in mm 2 50 4.33 Aisle width for right angle stack Ast in mm 4.35 Turning radius Wa in mm 61 1,550 5.1 Travel speed, loaded / unloaded mph km/h 3.6 / 3.6 5.8 / 5.8 5.2 Lift speed, loaded / unloaded ft / min km/h 25.5 / 43.3 0.13 / 0.22 5.3 Lowering speed, loaded / unloaded ft / min m / s 84.6 / 72.8 0.43 / 0.37 5.8 Maximum gradeability, loaded / unloaded % 8 / 16 5.10 Service brake electro magnetic 6.1 Drive motor (rating S 2 60 minutes) hp / kw 1.3 / 1.0 6.2 Lift motor rating at S 3 15% hp / kw 2.7 / 2.0 6.4 Battery voltage, maximum capacity (at 6 hour rate) V / Ah 24 / 300 6.5 Battery weight, minimum / maximum lbs kg 523 / 580 237 / 263 1) Using 77 OAL simplex mast, other masts may change value. 2) Using 41 long forks. This specification sheet only provides technical values for the standard truck. Non-standard tires, different masts, additional equipment, etc., could produce other values. Rights reserved for technical changes and improvements.

as of: 04/2017 Jungheinrich Jungheinrich Jungheinrich EJC B14 EJC B16 EJC B20 electric electric electric walkie straddle stacker walkie straddle stacker walkie straddle stacker 3,000 1,400 3,500 1,600 4,400 2,000 24 600 24 600 24 600 55.5 1,409 55.5 1,409 55.5 1,409 2,527 1,146 2,527 1,146 2,280 1,034 1,785 / 3,742 822 / 1,724 1,817 / 4,210 828 / 1,918 1,940 / 5,384 880 / 2,442 1,660 / 867 753 / 393 1,660 / 867 753 / 393 1,874 / 1,041 850 / 472 PU (polyurethane) PU (polyurethane) PU (polyurethane) 9.1 x 2.8 230 x 70 9.1 x 2.8 230 x 70 9.1 x 2.8 230 x 70 3.3 x 3.0 85 x 75 3.3 x 3.0 85 x 75 3.3 x 3.0 85 x 75 4.9 x 2.4 140 x 57 4.9 x 2.4 140 x 57 4.9 x 2.4 140 x 57 1 / 1 / 4 1 / 1 / 4 1 / 1 / 4 77 1,950 77 1,950 82.7 2,100 4 100 4 100 4.0 100 114.2 2,970 110.2 2,870 110.2 2,800 165 4,200 162 4,100 136.9 3,477 33.5 / 51.4 850 / 1,305 33.5 / 51.4 850 / 1,305 33.5 / 51.4 850 / 1,305 2.75 70 2.75 70 2.75 70 75.2 1,910 75.2 1,910 75.2 1,910 77.2 1) 2) 2,060 1) 2) 77.2 1) 2) 2,060 1) 2) 81.1 1) 2) 1) 2) 2,060 35.8 1) 910 1) 35.8 1) 910 1) 35.8 1) 910 1) 43.3 / 50 / 57.9 1,100 / 1,270 / 1,470 43.3 / 50 / 57.9 1,100 / 1,270 / 1,470 43.3 / 50 / 57.9 1,100 / 1,270 / 1,470 1.6 / 3.9 40 / 100 1.6 / 3.9 40 / 100 2.0 / 5.5 50 / 140 31.5 800 31.5 800 31.5 800 31.5 800 31.5 800 31.5 800 12.4 / 27.8 316 / 706 12.4 / 27.8 316 / 706 12.4 / 27.8 316 / 706 35.4 / 42.1 / 50 900 / 1,070 / 1,270 35.4 / 42.1 / 50 900 / 1,070 / 1,270 35.4 / 42.1 / 50 900 / 1,070 / 1,270 1.6 40 1.6 40 1.6 40 2 50 2 50 2 50 Please contact your local Jungheinrich dealer for information 63.8 1,620 63.8 1,620 63.8 1,620 3.6 / 3.6 5.8 / 5.8 3.6 / 3.6 5.8 / 5.8 3.6 / 3.6 5.8 / 5.8 31.5 / 49.2 0.16 / 0.25 29.5 / 49.2 0.15 / 0.25 19.7 / 35.4 0.10 / 0.18 72.8 / 67 0.37 / 0.34 72.8 / 67 0.37 / 0.34 72.8 / 67 0.37 / 0.34 8 / 16 7 / 16 5 / 16 electro magnetic electro magnetic electro magnetic 2.1 / 1.6 2.1 / 1.6 2.1 / 1.6 4.0 / 3.0 4.0 / 3.0 4.0 / 3.0 24 / 375 24 / 375 24 / 375 536 / 742 243 / 336 536 / 742 243 / 336 603 / 666 273 / 302

Technical Data Characteristics Weights Wheels, Chassis 1.1 Manufacturer Jungheinrich 1.2 Model EJC 214 1.3 Drive electric 1.4 Type walkie fork-over stacker 1.5 Load capacity / rated load Q lbs kg 3,000 1,400 1.6 Load center distance c in mm 24 600 1.9 Wheelbase y in mm 50 1,277 2.1 Service weight including battery (see line 6.5) lbs kg 2,390 1,084 2.2 Axle loading loaded, front / rear lbs kg 1,755 / 3,635 809 / 1,675 2.3 Axle loading unloaded, front / rear lbs kg 1,659 / 731 752 / 332 3.1 Tires PU (polyurethane) 3.2 Tire size, drive in mm 9.1 x 2.8 230 x 70 3.3 Tire size, load in mm 3.3 x 4.3 85 x 110 Tire size, caster in mm 4.9 x 2.4 140 x 57 3.5 Wheels number, drive / caster / load 1 / 1 / 2 4.2 Overall lowered height (OAL) h 1 in mm 77 1,950 4.3 Free-lift h 2 in mm 4 100 4.4 Maximum fork height (MFH) h 3 in mm 114.2 2,970 4.5 Overall extended height (OAE) h 4 in mm 156 3,965 4.9 Handle height in drive position, minimum / maximum h 14 in mm 33.5 / 51.4 850 / 1,305 4.15 Lowered fork height h 13 in mm 3.55 90 Overall length, to tip of baseleg in mm N/A N/A 4.19 Overall length l 1 in mm 75.1 1) 1,908 1) Dimensions Performance Motors 4.20 Length to fork face, headlength l 2 in mm 29.9 1) 758 1) Overall baseleg width b 1 in mm N/A N/A 4.22 Fork dimensions, thickness / width s / e in mm 2.2 / 7.3 56 / 185 Overall chassis width b 2 in mm 31.5 800 4.24 Fork carriage width b 3 in mm N/A N/A 4.25 Width across forks, minimum / maximum b 5 in mm 22.5 570 Baseleg opening width (BLO) b 4 in mm 7.9 200 4.31 Ground clearance, under mast (loaded) m 1 in mm 1.4 30 4.32 Ground clearance, center of wheelbase m 2 in mm 1.4 30 4.33 Aisle width for right angle stack Ast in mm 4.35 Turning radius Wa in mm 59 1,488 5.1 Travel speed, loaded / unloaded mph km/h 3.6 / 3.6 5.8 / 5.8 5.2 Lift speed, loaded / unloaded ft / min km/h 31.5 / 49.2 0.16 / 0.25 5.3 Lowering speed, loaded / unloaded ft / min m / s 72.8 / 67 0.37 / 0.34 5.8 Maximum gradeability, loaded / unloaded % 8 / 16 5.10 Service brake electro magnetic 6.1 Drive motor (rating S 2 60 minutes) hp / kw 2.1 / 1.6 6.2 Lift motor rating at S 3 15% hp / kw 4.0 / 3.0 6.4 Battery voltage, maximum capacity (at 6 hour rate) V / Ah 24 / 375 6.5 Battery weight, minimum / maximum lbs kg 536 / 742 243 / 336 1) Using 77 OAL simplex mast, other masts may change value. 2) Using 41 long forks. This specification sheet only provides technical values for the standard truck. Non-standard tires, different masts, additional equipment, etc., could produce other values. Rights reserved for technical changes and improvements.

as of: 04/2017 Jungheinrich Jungheinrich EJC 216 EJC 220 electric electric walkie fork-over stacker walkie fork-over stacker 3,500 1,600 4,400 2,000 24 600 24 600 50 1,277 53.4 1,357 2,400 1,089 2,400 1,089 1,920 / 3,980 810 / 1,679 1,920 / 3,980 810 / 1,679 1,667 / 734 756 / 333 1,667 / 734 756 / 333 PU (polyurethane) PU (polyurethane) 9.1 x 2.8 230 x 70 9.1 x 2.8 230 x 70 3.3 x 4.3 85 x 110 3.3 x 3.3 85 x 85 4.9 x 2.4 140 x 57 4.9 x 2.1 140 x 54 1 / 1 / 2 1 / 1 / 4 77 1,950 82.7 2,100 4 100 4 100 110.2 2,870 110.2 2,870 153 3,890 153 3,890 33.5 / 51.4 850 / 1,305 33.5 / 51.4 850 / 1,305 3.55 90 3.55 90 N/A N/A N/A N/A 75.1 1) 1,908 1) 78.27 1) 1,988 1) 29.9 1) 758 1) 33 1) 838 1) N/A N/A N/A N/A 2.2 / 7.3 56 / 185 2.6 / 7.7 61 / 195 31.5 800 32.3 820 N/A N/A N/A N/A 22.5 570 22.5 570 7.9 200 N/A N/A 1.4 30 N/A N/A 1.4 30 0.79 20 59 1,488 61.7 1,568 3.6 / 3.6 5.8 / 5.8 3.6 / 3.6 5.8 / 5.8 31.5 / 49.2 0.16 / 0.25 19.7 / 35.4 0.10 / 0.18 72.8 / 67 0.37 / 0.34 72.8 / 67 0.37 / 0.34 7 / 16 5 / 16 electro magnetic electro magnetic 2.1 / 1.6 2.1 1.6 4.0 / 3.0 4.0 3.0 24 / 375 24 375 536 / 742 243 / 336 536 / 635 243 / 288

EJC B12-B20 / EJC 214-220 EJC B12-B20 l x c Q h4 h3 h1 51.4 h2 s 35.1 1.4 3.7 6.2 3.1 0.8 l2 y l1 EJC 214/216 Ast Wa 31.5 e b5 b4 b11 b1 b10 EJC 214/216 l6 a 2 a 2 EJC 214-220 c h4 h1 c h4 h14 max. h3 Q h1 h3 Q h14 max. h14 900 h14 900 min. l x l x min. s s h2 170 m l2 l 170 2 y Wa h13 m22 y l1 l1 h2 h13 l6 Wa l6 e b1 b10 b11 b5 b12 e b11 b5 b12 b1 b10 a/2 a/2 Ast a/2 a/2 Ast

The Jungheinrich Advantage Powerful operation and durable construction The electric walkie stackers feature solid steel chassis components and powerful motors to provide years of dependable service. The powerful, 1.6 kw AC drive motor ensures the maximum speed of 3.6 mph is maintained, even with a full load. An impressive, 3 kw hydraulic motor provides fast lifting speeds of up to 31.5 ft./min. with a full load. Manufactured with a rugged chassis and a rigid mast, the forklift is suitable for the lifting of heavy loads and applications requiring high productivity. Stable and customizable The EJC B12 EJC B20 lift trucks are fitted with a Class II fork carriage and optional adjustable baselegs, allowing the forklift to be easily adapted to different loads and applications. This style of stacker is suitable for straddling a pallet. The EJC 214 EJC 220 lift trucks are fitted with fixed forks resting over the baselegs, yielding a narrower, more maneuverable chassis. This style of stacker is suitable for an open-bottom-type pallet. The electric walkie stackers also provide excellent travel stability due to the forklift s standard caster wheels, which maintain direct contact with the floor at all times. Long operating times The battery compartment accepts a 24-volt industrial battery. Battery changing is carried out through overhead battery extraction. Convenient storage areas Pen tray, cup holder and clipboard are incorporated into the top of the chassis. Secure, ergonomic operation Operator security and ergonomic control features were important to the design process. All operating functions, including carriage lift and lower activation, are controlled through the multi-function control handle without having to reach to the chassis. As a result, the operator can fully concentrate on the stacking and retrieval of pallets. Precise lifting and lowering of fragile loads is achieved through proportional hydraulics. Long, low-mounted handle design keeps the operator a secure distance from the lift truck during normal operation and provides additional leverage for ease of steering. Low operating noise. The standard load backrest helps secure loose loads. Large, red emergency cut-off switch enables quick, intuitive shutdown of the forklift in case of emergency. Controlled travel The Jungheinrich electronic impulse control (speedcontrol) facilitates smooth travel with adjustments for virtually every application. Desired travel speed is maintained in various situations, including ramps and inclines. The forklift s maximum programmed travel speed (up to 3.6 mph) is possible when traveling with or without a load. Individually-adjustable travel parameters (acceleration, minimum/ maximum speed) ensure optimum adjustment to virtually every application. Load bearing caster wheel provides excellent stability on flat or uneven floors. Available options Two- and three-stage masts with lift heights up to 210 inches. Cold storage package for refrigeration and freezer applications. Keyless PIN code input for secure truck activation (CanCode). Battery discharge indicator with hour meter and service code display (CanDis). Parts when you need them Jungheinrich s Parts Fast or Parts Free Guarantee ensures next-business-day delivery by 5:00 p.m. of all Jungheinrich parts in the United States, or they re free, including freight. For customers in Canada and Mexico, the guarantee ensures shipping of parts within 24 hours from the time the order was placed by the dealer. See your local Jungheinrich dealer for program details. * Programs may be subject to change without notice and may vary by region. Please ask your local Jungheinrich dealer for complete terms and conditions. JEHN0217 04/2018 2018 Jungheinrich. All rights reserved. All registered trademarks are the property of their respective owners, including Jungheinrich and its logos. Some products may be shown with optional equipment. 1-877-JH-FORKS www.mcfa.com/jungheinrich