Catalog HY-351/US Information Cartridge Style Valve. For additional information see Tips on pages 1-4. Valve Series H13P Spherical poppet for low leakage D -Ring eliminates back-up rings Dual sense paths for reduced P ll external parts zinc plated let Drop vs. (Through cartridge only) 1 6.9 In Free Inlet Drop ( P) 8 6 4 2 3 45 GPM 61 4 8 12 16 (Q) Rated 6 (16 GPM) 35 Bar (5 PSI) Leakage at 2 drops/min. (.13 cc/min.) SSU (32 cst) at 35 Bar (5 PSI) ll parts steel. ll operating parts -45 C to +93.3 C ( D Ring) (-5 F to +2 F) (-25 F to +25 F) of 45 to 2 SSU (6 to 42 cst) 2 PSI SPRING 5 PSI SPRING.9 kg (.2 lbs.) Cavity C1-2 (See Section for more details) Form Tool Rougher None Finisher NFT1-2F Free Inlet Ø.8 Free let 31.7 (1.25) 7/8-14 UNF-2 H13P 1 Valve Code Omit.3 Bar (5 PSI) 2 Bar (2 PSI) 5 3.5 Bar (5 PSI) 65 4.5 Bar (65 PSI) 8 Bar (8 PSI) 1 6.9 Bar (1 PSI) Omit D -Ring / (SK1-2) N Nitrile / (SK1-2N) (SK1-2V) 11.2 (.44) 1" Hex. 69-75 Nm (51-55 lb. ft.) Part No. 4P 1/4 NPTF (B1-2-*4P) 6P 3/8 NPTF (B1-2-*6P) 8P 1/2 NPTF (B1-2-*8P) 6T SE-6 (B1-2-*6T) T6T SE-6 (B1-2-T6T) 8T SE-8 (B1-2-*8T) T8T SE-8 (B1-2-T8T) 6B 3/8 BSPG (B1-2-6B) * dd for aluminum,omit for steel. Steel body only. 1
Catalog HY-351/US Information Cartridge Style Valve. For additional information see Tips on pages 1-4. Valve Series H121P Fully guided poppet for smooth operation ll external parts zinc plated Drop vs. (Through cartridge only) 1 6.9 In In Drop ( P) 8 6 4 2 3 61 GPM 91 8 16 24 (Q) 121 32 Free Ø 22.2 (.87) (1.58) 9. (.35) Rated 121 (32 GPM) 35 Bar (5 PSI) SSU (32 cst) at 35 Bar (5 PSI) ll parts steel. ll operating parts -4 C to +93.3 C (Nitrile) (-4 F to +2 F) (-25 F to +25 F) of 45 to 2 SSU (6 to 42 cst).14 kg (.3 lbs.) Cavity C12-2 (See Section for more details) Form Tool Rougher None Finisher NFT12-2F H121P 12 Valve 1-1/16-12 UNF-2 Code Omit 1.7 Bar (25 PSI) 65 4.5 Bar (65 PSI) Omit Nitrile / (SK12-2) (SK12-2V) 1-1/4" Hex. 76 Nm (56 lb. ft.) Part No. 12P 3/4 NPTF (B12-2-*12P) 8T SE-8 (B12-2-*8T) 12T SE-12 (B12-2-*12T) 12B 3/4 BSPG (B12-2-*12B) *dd for aluminum, omit for steel. 12
Catalog HY-351/US Information Cartridge Style Valve. For additional information see Tips on pages 1-4. Valve Series H161P Fully guided poppet for smooth operation ll external parts zinc plated Drop vs. (Through cartridge only) 2 14 Free In Drop ( P) 16 12 8 4 11 8.3 38 76 114 GPM 1 1 2 3 4 (Q) Rated 225 (6 GPM) 35 Bar (5 PSI) SSU (32 cst) at 35 Bar (5 PSI) ll parts steel. ll operating parts -4 C to +93.3 C (Nitrile) (-4 F to +2 F) (-25 F to +25 F) of 45 to 2 SSU (6 to 42 cst).27 kg (.6 lbs.) Cavity C16-2 (See Section for more details) Form Tool Rougher None Finisher NFT16-2F 189 5 227 6 Ø 28.5 (1.12) H161P 16 Valve Code Omit.3 Bar (5 PSI) 2 Bar (2 PSI) 65 4.5 Bar (65 PSI) 125 8.6 Bar (125 PSI) 175 12.1 Bar (175 PSI) Omit Nitrile / (SK16-2) Inlet (SK16-2V) let 44.4 (1.75) 1-5/16-12 UN-2.7 1 (.51) 1-1/2" Hex. 99 Nm (73 lb. ft.) Part No. 12P 3/4 NPTF (B16-2-*12P) 16P 1 NPTF (B16-2-*16P) 8T SE-8 (B16-2-*8T) 12T SE-12 (B16-2-*12T) 16T SE-16 (B16-2-*16T) 12B 3/4 BSPG (B16-2-12B) 16B 1 BSPG (B16-2-*16B) * dd for aluminum, omit for steel. Steel body only. 14
Catalog HY-351/US Information Cartridge Style Valve. For additional information see Tips on pages 1-4. Valve Series H21P Drop vs. (Through cartridge only) Drop ( P) Fully guided poppet for smooth operation ll external parts zinc plated 12 8.3 1 8 6 4 2 6.9 Rated 33 (8 GPM) 35 Bar (5 PSI) SSU (32 cst) at 35 Bar (5 PSI) ll parts steel. ll operating parts -4 C to +93.3 C (Nitrile) (-4 F to +2 F) (-25 F to +25 F) of 45 to 2 SSU (6 to 42 cst) 38 76 114 GPM 1 1 2 3 4 (Q).27 kg (.6 lbs.) 189 Cavity C2-2 (See Section for more details) Form Tool Rougher None Finisher NFT2-2F 5 227 6 3 8 Free Ø 36.4 Inlet let 55.8 (2.2) 1-5/8-12 UN-2 H21P 2 Valve Code Omit.3 Bar (5 PSI) 2 Bar (2 PSI) 65 4.5 Bar (65 PSI) Omit Nitrile / (SK2-2) (SK2-2V) 17.7 (.7) In 14.9 (.59) 1-7/8" Hex. 133 Nm (98 lb. ft.) Part No. 2T SE-2 (B2-2-2T) 2B 1-1/4 BSPG (B2-2-2B)
Catalog HY-351/US Information Cartridge Style Pilot Operated Valve. For additional information see Tips on pages 1-4. Drop vs. (Through cartridge only) Drop ( P) Internal pilot position simplifies manifold design ll external parts have yellow zinc dichromate. This coating is ideal for salt spray applications. 1 6.9 8 6 4 2 Rated 3 (8 GPM) 35 Bar (5 PSI) SSU (32 cst) at 35 Bar (5 PSI) Pilot Ratio 3:1 ll parts steel. ll operating parts -4 C to +93.3 C (Nitrile) (-4 F to +2 F) (-25 F to +25 F) of 45 to 2 SSU (6 to 42 cst) 8 GPM 23 2 4 6 (Q).9 kg (.2 lbs.) Cavity C1-3 (See Section for more details) Form Tool Rougher NFT1-3R Finisher NFT1-3F 3 8 Pilot Operated Valve Series CPH14P.8 CPH14P 1 P.O. Valve Code 1. Bar ( PSI) Omit 2.1 Bar (31 PSI) 5 3.5 Bar (5 PSI) Omit Nitrile / (SK1-3N) (SK1-3V) * dd for aluminum, omit for steel. Steel body only. 47.2 (1.9) Part No. 4P 1/4 NPTF (B1-3-*4P) 6P 3/8 NPTF (B1-3-*6P) 8P 1/2 NPTF (B1-3-*8P) 6T SE-6 (B1-3-*6T) 8T SE-8 (B1-3-*8T) 6B 8B 7/8-14 UNF-2 Cylinder let Valve Inlet Pilot 11.2 (.44) 3/8 BSPG (B1-3-6B) 1/2 BSPG (B1-3-*8B) 1" Hex. 65 Nm (48 lb. ft.) 19
Catalog HY-351/US Information Pilot Operated Valve Series CPH124P Cartridge Style Pilot Operated Valve. For additional information see Tips on pages 1-4. Internal pilot position simplifies manifold design ll external parts have yellow zinc dichromate. This coating is ideal for salt spray applications. Drop vs. (Through cartridge only) 1 6.9 Cylinder let Valve Inlet Pilot Drop ( P) 8 6 4 2 19 38 GPM 57 5 1 (Q) Rated 75 (2 GPM) 35 Bar (5 PSI) SSU (32 cst) at 35 Bar (5 PSI) Pilot Ratio 3:1 ll parts steel. ll operating parts -4 C to +93.3 C (Nitrile) (-4 F to +2 F) (-25 F to +25 F) of 45 to 2 SSU (6 to 42 cst).2 kg (.44 lbs.) Cavity C12-3 (See Section for more details) Form Tool Rougher NFT12-3R Finisher NFT12-3F 76 2 Ø 22.2 (.87) CPH124P 12 P.O. Valve Code Omit 1.7 Bar (25 PSI) Omit Nitrile / (SK12-3) (SK12-3V) 58.9 (2.32) Part No. 8T SE-8 (B12-3-*8T) 12T SE-12 (B12-3-*12T) 8B 1 1/16-12 UNF-2 1/2 BSPG (B12-3-8B) 8.9 (.35) 1-1/4" Hex. 76 Nm (56 lb. ft.) * dd for aluminum, omit for steel. Steel body only. 2
Catalog HY-351/US Information Pilot Operated Valve Series D3B125 Pilot to Open, Poppet Type Valve. For additional information see Tips on pages 1-4. Hardened poppet for maximum durability High flow capacity Low leakage - less than 3 drops/min. Sealed pilot Good contamination tolerance Cavity commonality with load control valves Dual line blocks available ll external parts zinc plated Drop vs. (Through cartridge only) 29 2 Drop ( P) 218 145 73 Rated (4 GPM) Nominal @ 8 (21 GPM) 7 Bar (1 PSI) (Piloted Open) Leakage at SSU (32 cst) Pilot Ratio 4:1 42 Bar (6 PSI) Less than 3 drops/min. 2 Bar (3 PSI) Steel operating parts, hardened steel poppet. -4 C to +93.3 C (Nitrile, Buna-N) (-4 F to +2 F) (-25 F to +25 F) of 45 to 2 SSU (6 to 42 cst) Cavity 1 5 Free 2 to 1.24 kg (.528 lbs.) Piloted Open 1 to 2 4 8 GPM 12 1.6 21.1 31.7 (Q) 3C (See Section for more details) 16 42.3 D3B125 Valve N Nitrile, Buna-N / (SK38N-1) (SK38V-1) 65. (2.56) 1-3/16" - 12 UNF Order Bodies Separately LB1 Line Code ing ing 39 3/4 BSP (Main) 1/4 BSP (ux.) 69 1 SE (Main) 1/4 SE (ux.) 34 3/4 BSP Dual Cavity 234 3/4 SE Dual Cavity S Steel 8. (.31) 35 F Hex. 85 Nm (63 lb. ft.) 3
Catalog HY-351/US Information In-Line Valve Series In-Line Style Valve. For additional information see Tips on pages 1-2. () Compact in size In-line mounting Easily adaptable to various applications ll external parts zinc plated (In) let (In) Inlet Inlet Rated -4-3 11 (3 GPM) -6-2 22 (6 GPM) 27 Bar (3 PSI) SSU (32 cst) at 172 Bar (25 PSI) Steel (Chromate Plated) -4 C to +93.3 C (-4 F to +2 F) (Nitrile Only) of 45 to 2 SSU (6 to 42 cst) -4-3.36 kg (.8 lbs.) -6-2.45 kg (1. lbs.) s vs. Drop (Through cartridge only) Drop ( P) Drop ( P) PSI 3 1 5 3 2.1 25 2 1 5 Bar 2.7 25 17.2 2 13.8 1.3 6.9 3.4 1.9 3.8 5.7 7.6 9.5 11.5 GPM 13.2.5 1 1.5 2 2.5 3 3.5 (Q) 1.7 1..7.3-4 -6 3.8 7.6 1.1 18.9 22.7 GPM 26.5 1 2 3 4 5 6 7 (Q) 8
Catalog HY-351/US In-Line Valve Series Information -4-3 28.8 (1.14) 33.3 (1.31) 23.9 (.94) 57.4 (2.26) 19.1 (.75) -6-2 3 (1.29).7 31.8 (1.25) 17/64 Dia. Mounting Holes 5.6 (.22) 26.9 (1.6) 19.3 (.76) 13.7 (.54) 38.1 (1.5) 22.2 (.88) 6 (2.58).7 In-Line Valve Type 4 1/4 JIC 6 SE-6 Code Type 2 SE (#6) 3 Male JIC (1/4 only) 9