Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Net Power Cummins QSL1, Tier Final 3 HP (8 kw) Reach standard 9'1" (18 m) optional 7'" (3 m) Operating Weight M/rubber tired,13 lb (93, kg) Magnet System rating kw
Technical Specifications 8 M E ENGINE model Cummins QSL1, Tier Final type direct injection, turbocharged, fuel preheating emission EPA Tier Final net power 3 HP (8 kw) @ 1, rpm injection high pressure common-rail fuel tank gal (1, L) air filtration direct flow filtration system dual stage filter with pre-filter control integrated ECM, eco mode, auto-stop ELECTRICAL alternator starter battery HYDRAULIC SYSTEM V V 1 V, 18 Ah system type load sensing hydraulic pilot-controlled work functions load limit sensing control pump type variable-displacement axial-piston pump max. pump flow gpm (8 l / m) max. pressure,93 psi (3 bar) hydraulic tank 38 gal (9 L) hydraulic system 3 gal (1,1 L) filtration high-performance filtration 3 micron (HydroClean) COOLING cooling type hydraulic / water charge air WEIGHT operating weight side-by-side coolers cool-on-demand hydraulic fan drive axial piston pump, reversible fan thermostatically controlled, closed loop system direct fan drive,13 lb (93, kg) SWING SYSTEM swing speed swing hydraulic drive swing brake swing bearing TRAVEL / UNDERCARRIAGE type drive system tires steering front axle rear axle service brake parking brake safety -. rpm closed loop -axial piston motors compact planetary gear with slant-axis hydraulic motor integrated brake valves multidisc brake, spring loaded external teeth, sealed ball bearing rubber tired MP71E all-wheel drive variable displacement hydraulic motor, direct mounted automatic brake valve -gear power shift transmission 8 x 1.- (solid rubber) joystick steering hydraulic locking pendulum steering axle fixed disc brake spring loaded, multidisc brake travel alarm REFILL CAPACITIES fuel tank gal (1, L) engine cooling system 1.8 gal ( L) engine oil w / filter 7. gal (7. L) hydraulic tank 37.7 gal (9 L) hydraulic system 18 gal (8 L) swing box 1. gal (. L) axle hub (front axle) 1. gal (.7 L) each axle hub (rear axle) 1. gal (.7 L) each axle differential (front axle) 11.7 gal (. L) axle differential (rear axle). gal (.3 L) axle drop box (front axle). gal (1. L) axle drop box (rear axle). gal (1. L) parking brake.1 gal (. L) swing ring lubrication reservoir. gal (1. L) central lubrication reservoir 8.8 lb ( kg) diesel exhaust fluid. gal ( L) MAGNET SYSTEM rating voltage (magnetized) controller generator drive kw 3 V Hubbell Baldor hydraulic Subject to technical modification.
Standard / Optional Equipment 8 M E ENGINE Water separator in fuel line Automatic idle / engine stop control Eco mode Visual fuel tank check Engine block & water separator pre-heater ELECTRIC Battery disconnect switch Centralized fuse box Battery jump start connection from ground level HYDRAULIC Pilot pressure controlled variable displacement pump Thermostatically controlled cooling system Centralized hydraulic test ports Protection covers for pilot pressure control valves 3 micron dual filtration system Load sensing, flow on demand hydraulic system Optimized hydraulic pump regulation (GLR) Visual hydraulic tank check from ground level Attachments open, close & rotation hydraulics Hydraulic tank shut off valve Electrical hydraulic tank pre-heater Biodegradable hydraulic oil Hydraulic circuit for scrap shear Hydraulic circuit for hammer, breaker Hydraulic circuit for circuit slasher Additional hydraulic circuits Attachment return filtration filters ( µm) UPPER CARRIAGE Rearview & right side view camera system Automatic lubrication system Anti-slip mats on walking area Lockable side doors Handrails on top of upper carriage Mirror left side Turning signal lights in upper carriage frame Removable belly panels Additional light package Custom colors Seawater paint coating SWING SYSTEM 3 protection cover, removable Electrical driven swing gear pinion lubrication pump OPERATOR S CAB (Maxcab) Hydraulic elevating cab system E7 Multi adjustable, air suspended operator s seat 3 (7 mm) seat belt Seat heater Automatic climate control (heater / AC) Air outlets w / defroster Storage area for lunch box Large cup holder Fire extinguisher Tinted windows Door window as sliding window AM / FM Radio with CD player & speakers Removable floor mat SenCon diagnostic system Multicolor Monitor Tilt out front window Halogen light package on cab roof Mechanical hour meter Sliding door Catwalk w / handrail 1 V / V power outlet Windshield wiper and washers OPERATOR S CAB (Maxcab) Emergency exit hammer Safety lever Sun shades Interior lighting Rain cover front window Outside mirror Optical and acoustic warning system Positive filtered ventilation (pressurized cab) Safety check valves for elevating cab cylinder Foot rest Maxcab industry Windshield protection guard Skylight protection guard Skylight FOPS protection guard Bullet proof windshield Bullet proof skylight Polycarbonate side windows Additional light package Fixed cab elevation Hydraulic elevating up and out cab E3/ Steering column instead of joystick steering Steering column in combination with joystick steering Additional cameras UNDERCARRIAGE Robust designed material handling undercarriage Heavy duty axles Solid rubber tires 8 x 1.- Front axle automatic oscillating w/axle unlock (travel position) Drive train protection guards Travel alarm Centralized lubrication points circuit servo brake system -point outriggers w/integrated safety check valves in outrigger cylinders Tool and storage compartments, lockable Individual outrigger control WORKING EQUIPMENT Purpose built material handling boom Purpose built material handling stick Attachment hydraulic line connections with ball valves Boom position 1 Safety check valves for stick cylinders Safety check valves for boom cylinders Cylinder end position dumping Boom hoist limitation Bronze bushings connected to automatic lubrication system Stick & boom limiters Halogen light package boom Purpose built material handling stick with reversing linkage Purpose built material handling boom for scrap shears Boom position MAGNET SYSTEM Hydraulic driven generator Magnet controller Magnet suspension link ATTACHMENTS Orange peel grapple Mag grapple Clamshell Magnet Scrap shear Power attachment Pipe handler Subject to technical modification. Standard Equipment Optional Equipment 3
8 M E Lift Capacities Feet K18 7,91 [11.3] 8,19,91 [1.8] [11.3] 3,3 [13.7] 31,97 [1.] 33,731 [1.3] 3,93 [1.3] 39,3 37,79 [17.9] [17.],313,77 [.1] [.9],391, [8.3] [.7] 9,,7 [31.] [.7] 8, 8,3 [1.9] [.] 39,83 [18.],8 [19.1],97 [.] 7, [1.] 18,19 8,81 9, [8.] [1.9] [.] 17,19 3,,7 [7.8] [1.9] [3.] 18,19 31,97, [8.] [1.] [.8],7 31,97 8, [9.] [1.] [.] 33,731,7 [1.3] [.3] 7,999,1 [1.7] [11.] 3, 31,77 [1.] 3,8 [1.7] 33, [1.] 7,8 3,39 [1.] [.] 9,31,89 1,1 [13.3] [1.] [9.] 9,7 [13.] 3, 3, 31, [1.9] [1.3] 3,817 [1.7] 38,81 [17.] 7,8,91 [1.] [11.3] 8,19,3 1,1 [1.8] [11.9] [9.] 8,881,7,71 [13.1] [1.1] [11.1] 3,8 9,7 7,337,13 [1.8] [13.] [1.] [11.] 33,91 [1.] 3, 7,778,91 [13.9] [1.] [11.3],3 3,7 31,3 8,19,71 [18.3] [1.] [1.] [1.8] [11.1] 1,888 3,1 31,97 7,778,1 [19.] [1.] [1.] [1.] [11.],9 3,817 31, [19.3] [1.7] [1.3],9 [19.3] 1, [18.7] 38,3 [17.],37 [1.] 3,9 [1.1] 33,9 [1.] 31,8 [1.1] 3,8 [1.] 7,337,3 [1.] [.9],89 3,8 [1.] [.8],7,87 [1.1] [.] 8,,3 [1.9] [.9] 18 1 1 1 8 - - 3 3 1 - -1 - - -8 - machine shown in mirror image 117 8 1 1 1 18-3 Feet 1 3 3 7 Working Equipment K18 reach 9'1" (18. m) boom 3'" (.8 m) stick '7" (7.8 m) Operator s Cab model E7 Maxcab hydraulic elevating eye level approx. 19'9" (.1 m) Undercarriage model MP71 with -point outriggers tires 8 x 1.- solid rubber Lift capacities are stated in pounds. Values in brackets [ ] are stated in metric tons. Indicated figures are based on ISO 7 and do not exceed 7% or tipping and 87% of hydraulic capacity and machine standing on firm, level supporting surface. Loads are valid for 3 with machine support on outriggers. Lifting capacities do not include working equipment such as orange peel grapples, magnets, clamshells, etc. The load point is the center line of the attachment pivot mounting pin on the stick. Their weights must be deducted from the numbers indicated in the lifting charts. Please contact SENNEBOGEN or your local dealer for optimum attachment selection. The operator / user of the machine should be fully acquainted with the operator s & safety manual provided by Sennebogen. Capacities apply only to the machine as originally manufactured and equipped by SENNEBOGEN.
8 M E Lift Capacities Feet 3,8 [.8] 37,9,39 [17.] [19.],18 8,1 [7.3] [1.8] 3,8,3 [.8] [9.3] 3,89,3 [.7] [9.3],7 3,39, [11.] [.] [9.1] 7,117 [1.3] 8, [13.] 9,983 [13.] 3,8 3, [1.7] [13.9] 3,17 3,93 31,77 [1.] [1.3] [1.] 37,9 [17.],1 [18.] 1,89,9 [3.] [19.3],33,97 [.1] [.] 33,731,98 [1.3] [1.3] 1,787,7 8,1 [.8] [11.] [1.8] 13,889 3,89 [.3] [.7] 3, [19.8] 1,3 3,8 39,3 [7.1] [.8] [17.9],91 [11.3] 33,9 [1.] 3,13 [1.7] 3,37 [1.] 38,1 [17.3] 9,3 [17.9],3 [18.3],3 [18.3] 39,83 [18.] 38,81 37,99 [17.] [17.1] 39,3 3,39 [17.9] [1.],33,98 19,18 [11.] [.],89 [1.] 7,337 [1.] 7,778 [1.],91, 17,17 [11.3] [.],133 [11.],7 [11.] 8,,3 [13.] [11.9] 9, [13.] 3, [13.9] 31,97 [1.] 33,9 [1.] 33,91 [1.] 3,13 [1.7] 3,833 [1.8] 3,17 [1.] 3,8 [1.8] 9,983 [13.],89 [1.] 7,8 [1.] 8, [1.9] 9,31 [13.3] 9,983 [13.] 3, 9,983 [13.] 9, [13.] 3,89,3 [.7] [9.3] 3,8,7 17,37 [.8] [.1] [8.],1 [11.],9 [11.],33 [11.],,83 [.] [9.],98 1,38 [.] [9.7] 3,39 1, 1,97 [.] [9.8] [7.7],79 3,8 1,38 18,739 [11.7] [.8] [9.7] [8.], [1.],89 [1.], [1.],1 [11.8],79 [11.7] 8,,91 [1.9] [11.3],1,87 [11.8] [.],3 1,1 18,739 [.9] [9.] [8.] 3,89,7 18,19 [.7] [9.] [8.] 3,19 [.],3 18,98 [9.3] [8.3],98,83 [.] [9.],78, [.3] [9.1] 1, 18,78 [9.8] [8.] K 18 1 1 1 8 - - - 7 3 3 1 - -1 - -8 - machine shown in mirror image 11793 8 1 1 1 18-3 Feet 1 3 3 7 7 Working Equipment K reach '7" (. m) boom 38'8" (11.8 m) stick 8'" (8.8 m) Operator s Cab model E7 Maxcab hydraulic elevating eye level approx. 19'9" (.1 m) Undercarriage model MP71 with -point outriggers tires 8 x 1.- solid rubber Lift capacities are stated in pounds. Values in brackets [ ] are stated in metric tons. Indicated figures are based on ISO 7 and do not exceed 7% or tipping and 87% of hydraulic capacity and machine standing on firm, level supporting surface. Loads are valid for 3 with machine support on outriggers. Lifting capacities do not include working equipment such as orange peel grapples, magnets, clamshells, etc. The load point is the center line of the attachment pivot mounting pin on the stick. Their weights must be deducted from the numbers indicated in the lifting charts. Please contact SENNEBOGEN or your local dealer for optimum attachment selection. The operator / user of the machine should be fully acquainted with the operator s & safety manual provided by Sennebogen. Capacities apply only to the machine as originally manufactured and equipped by SENNEBOGEN.
8 M E Lift Capacities 37,8 31,3 [1.9] [1.],97,1 [3.1] [18.] 33,9 [1.] 3,31 3,7 [19.7] [1.] 3, 37,79 [13.9] [17.] 19,18 1,3 [7.1], 19,1 1,3 [.] [8.8] [7.], 18,739 1,771 [9.1] [8.] [.7] 1,8, 18,739 17,37 [9.9] [9.1] [8.] [8.],7,83 18,739 17,37 1,3 [.1] [9.] [8.] [8.] [7.],78,3 18,9 17,37 1,7 [.3] [9.3] [8.] [8.] [7.],1 3,19 [11.8] [.] 1,1 [9.] 7,117,3 1, [1.3] [.9] [9.8] 8, [1.9] 9,7 [13.] 31,3 [1.] 17,17 39,3 3,89 [17.9] [1.9],91 [11.3],1 [11.8] 7,117 [1.3] 8,19 [1.8] 1,1 8,19 3,17 9,1 [.] [1.8] [1.] [13.] 13,9 3,8 3, [.] [.8] [1.9] 9,7 1,,87 [.] [.] [.] 3,9 [1.1] 11,8 1,873,87 3,13 [.3] [7.] [.] [1.7] 9,983 [13.] 3, 3, 17,19 3,39 33,91 9,983 [7.8] [.] [1.] [13.] 18,739,71 33,9 [8.] [11.1] [1.1],1 3,8 [11.8] [1.] 9,1 [13.] 7,337 [1.],7 [.1] 3,19 [.],3 [.9],9 [11.],7 [11.],3 [11.9],7 [1.1],7 [1.1], [1.],7 [11.],1 [11.],9 1,8 [11.] [9.9] 19,1 [8.8] 17,87 [8.1] 1,7 [7.] 1,873 [7.] 19,8 18,98 1,97 1,9 [9.] [8.3] [7.7] [7.3],83 18,739 17,17 [9.] [8.],9 19,18 17,37 1,3 1,3 [9.] [8.] [7.] [7.1] 1, [9.8],7 [.1],78 [.3] 3,39 [.] 3,89 [.7] 3,89 [.7] 3,39 [.] 19,1 [8.9] 18,78 [8.] 1,7 [7.] 1,873 [7.], 18,18 17,19 1,873 [9.1] [8.] [7.8] [7.],3 18,739 17,17 1,9 [9.3] [8.] [7.3],9 19,18 17,17 1,9 [9.] [7.3] 1,1 [9.] 1,1 [9.] 19,18 19,18,9 18,739 [9.] [8.],78,83 17,87 [.3] [9.] [8.1] 1,38 [9.7] 19,18 18,9 [8.] 17,17 17,19 [7.8] 1,7 [7.] B1 18 1 1 1 8 - - - -8 Feet 7 3 3 1 - -1 - - -3 machine shown in mirror image 11733-1 8 1 1 1 18 Feet 1 3 3 7 7 8 8 Working Equipment B1 reach 8'" (1. m) boom '3" (13.8 m) stick 8'" (8.8 m) Operator s Cab model Maxcab E3/, hydraulic elevating and tilt feature eye level approx. '11" (.1 m) Undercarriage model MP71 with -point outriggers tires 8 x 1.- solid rubber Lift capacities are stated in pounds. Values in brackets [ ] are stated in metric tons. Indicated figures are based on ISO 7 and do not exceed 7% or tipping and 87% of hydraulic capacity and machine standing on firm, level supporting surface. Loads are valid for 3 with machine support on outriggers. Lifting capacities do not include working equipment such as orange peel grapples, magnets, clamshells, etc. The load point is the center line of the attachment pivot mounting pin on the stick. Their weights must be deducted from the numbers indicated in the lifting charts. Please contact SENNEBOGEN or your local dealer for optimum attachment selection. The operator / user of the machine should be fully acquainted with the operator s & safety manual provided by Sennebogen. Capacities apply only to the machine as originally manufactured and equipped by SENNEBOGEN.
8 M E Lift Capacities Feet,m 9,38 38,81 [.] [17.],99,8 [19.] [19.1] 1,33 38,81 [.] [17.] 3,3,3 [13.7] [11.9] 3,187 [1.] 3,17 [1.] 3,37 [1.] 9,91 1, 38,3 [.] [9.8] [17.] 9,9 1,97 31,3 [.] [7.7] [1.] 9,91 1,873,79 [.] [7.] [11.7] 11,3 1,873 3,89 [.] [7.] [.7] 1,3 1,3 [.] [7.] 3,19 [.] 1,873 [7.] 18,78 [8.] 18,739 [8.] 18,739 [8.] 18,9 [8.] 19,18 1, 19,1 [9.8] [8.9],91,7 [11.3] [.1] 7,8 [1.] 8,881 [13.1] 3, 31,97 [1.] 33,9 [1.] 3,17 [1.] 3,13 [1.7] 3,13 [1.7] 13,9 17,17 3,39 33,9 [.] [.] [1.] 18,19,3 [8.] [.9] 3,89 [1.9],133 3, [11.] [13.9] 3,19 [.],3 [.9],133 [11.],3 [11.9], [9.1],7 [9.] 1, [9.8],7 [.1] 3,19 [.] 7,337,3 [1.] [.9] 8,19 [1.8],9 [11.] 9,1,33 [13.] [11.] 9, [13.] 9,7 [13.] 9, [13.] 8, [1.9],89 [1.],79 [11.7],1 [11.8],79 [11.7],133 [11.] 3,8 [.8],71 1, [11.1] [9.8] 1,787 [.8] 1,3 1, [7.1] [.7] 17,17 17,17 17,17 1,1 [.9] 1,33 [.] 1,3 [7.] 1,787 [.8] 17,37 1,3 1,3 1,771 [8.] [7.] [7.] [.7] 18,78 1,7 1,3 1,771 1, [8.] [7.] [7.1] [.7] [.7] 18,19 1,97 1,873 [8.] [7.7] [7.] 18,9 [8.] 19,1 [8.8], [9.1] 17,17 17,87 [8.1] 1,3 [7.] 1,991 1,33 [.8] [.] 1,1 1,33 [.9] [.] 1,3 [7.] 1,1 [.] 18,98 1,97 1,873 1,771 1,787 [8.3] [7.7] [7.] [.7] [.8],7 18,9 17,17 [9.] [8.] 1,38 [9.7], [.],87 [.],98 [.],98 [.],98 [.] 19,1 [8.8] 19,8 [9.] 17,87 [8.1],83 18,19 [9.] [8.],3 18,19 [9.3] [8.] 1,9 1,991 13,9 [7.3] [.8] [.] 1,1 [.9] 18,78 1,7 1,3 [8.] [7.] [7.] 1,97 1,3 [7.7] [7.] 1,97 1,3 [7.7] [7.],3 18,19 1,7 1,1 [9.3] [8.] [7.] [.9],83 18,98 [9.] [8.3],7 19,8 17,37 1,3 [.1] [9.] [8.] [7.],9 18,19 [9.] [8.] 18,9 1,3 [8.] [7.] 1,1 [.] B3 18 1 1 1 8 - - - -8 8 7 7 3 3 1 - -1 - - -3 machine shown in mirror image 17799 8 1 1 1 18-1 Feet 1 3 3 7 7 8 8 Working Equipment B3 reach 7'" (3. m) boom '3" (13.8 m) stick 33'" (. m) pylon 8'" (. m) Operator s Cab model Maxcab Skylift 7 hydraulic elevating eye level approx. '11" (.1 m) Undercarriage model MP8 with -point outriggers tires 8 x 1.- solid rubber Lift capacities are stated in pounds. Values in brackets [ ] are stated in metric tons. Indicated figures are based on ISO 7 and do not exceed 7% or tipping and 87% of hydraulic capacity and machine standing on firm, level supporting surface. Loads are valid for 3 with machine support on outriggers. Lifting capacities do not include working equipment such as orange peel grapples, magnets, clamshells, etc. The load point is the center line of the attachment pivot mounting pin on the stick. Their weights must be deducted from the numbers indicated in the lifting charts. Please contact SENNEBOGEN or your local dealer for optimum attachment selection. The operator / user of the machine should be fully acquainted with the operator s & safety manual provided by Sennebogen. Capacities apply only to the machine as originally manufactured and equipped by SENNEBOGEN. 7
Under our policy of continuous improvements we reserve the right to change specifications, materials and design without prior notice. The illustrations shown may include optional equipment. Always refer to the appropriate Operation and maintenance manual for specific product information. See your local SENNEBOGEN dealer for further information. 18 SENNEBOGEN LLC. All rights reserved. EXPERIENCE THE GREEN HYBRID SYSTEM SCAN TO WATCH AN ONLINE VIDEO DEMONSTRATION SENNEBOGEN LLC 197 Sennebogen Trail Stanley, NC 878, USA Phone +1 (7) 37-9 Fax +1 (7) 37-889 Email sales@sennebogenllc.com 8EM-18 GO FOR GREEN www.sennebogen-na.com