Constant Pressure - Variable Speed Drive Systems FW121 211 Supersedes 11 COMMANDER PRO CP75, CP1 and CP15 COMPLETE PACKAGED CONSTANT PRESSURE SYSTEMS DESIGNED FOR THE PROFESSIONAL PUMP INSTALLER LIMITED WARRANTY 5 Years on Pump End and Motor 3 Years on Control FEATURES: Easy Installation Increases flow as demand increases Adjustable constant pressure Built-in diagnostics Automatic pump and motor protection Smart Reset technology HIGH CAPACITY 35-85 STAINLESS STEEL SUBMERSIBLE PUMPS WITH SUBDRIVE 3 VARIABLE SPEED CONTROLLER 5 HP Constant Pressure Systems for Irrigation and Deep Well Applications
Commander PRO75, 1 and 15 1.5, 2 and 3 HP Constant Pressure Systems for Home, Irrigation & Deep Well Applications The Commander Pro 75, 1 and 15 series of pre-packaged constant pressure water systems are designed specifically for demanding applications. These models are engineered to provide a constant pressure water supply from as deep as 95 or at flows from 2 to 125. Features include dependable 4 submersible Applications include: Residential Water Systems City-like water pressure Smaller tank saves space Geothermal Systems No need for large buried tanks Eliminates pressure cycling pump technology, single-phase power input and Franklin SubDrive 75, 1 and 15 variable speed controllers. These systems are designed to reduce total equipment costs, as large bulky tanks, external motor protection devices and complicated adjustments are no longer required. Lawn Irrigation Systems Even distribution of water in zones Eliminates need for separate system Water Treatment Systems More efficient back flushing No need for multiple pumps NEMA 1 SYSTEM ONLY Not supplied with LT Models Wire Sizing The maximum allowable wire lengths for connection of motor to the CP Water SubDrive 75 are given in the following table. System HP CP75 1.5 CP1 2 CP15 3 AWG Copper Wire Sizes, 14F/6C Insulation 14 12 1 8 6 42 67 16 167 - Meters 128 24 322 58-32 51 81 128 21 Meters 97 155 246 39 612 24 39 62 99 154 Meters 73 119 189 32 469 2 Copyright 211 Flint & Walling
Commander PRO75, 1 and 15 GENERAL SPECIFICATIONS Commander Pro 75 Series Commander Pro 1 Series Commander Pro 15 Series Input (From Power Source) Voltage 2-25 V/Single Phase Frequency 6/5 Hertz Amps (RMS) 11 Amps 19 Amps 23 Amps Power (Idle) 35 Watts 65 Watts 65 Watts Power 24 Watts @ 8 Hz 38 Watts @ 8 Hz 46 Watts @ 8 Hz Power Factor 1 (Constant) Output (To Motor) Voltage Variable V / Three Phase Frequency Variable (3-8 Hz) Amps (RMS 5.9 Amps 8.1 Amps 1.9 Amps Start High Torque - Soft Start Pressure 25-8 PSI (preset at 5 psi) Controller Enclosure NEMA 1 (indoor) NEMA 4 (outdoor) Built-in protection & diagnostics for: Surge Protection Underload - low water conditions Under voltage Short Circuit Overheated Controller w/auto compensation feature Locked Pump w/auto reverse feature City-like water pressure for rural water systems in one complete package. Systems include: Franklin s CP Subdrive 75, 1 or 15 Controller with advanced electronics. Aircooled NEMA 1 or NEMA 4 enclosure. Adjusts 25 to 8 PSI constant pressure. Includes pressure switch. Factory specified pump end for optimal performance and efficiency. Specifically factory engineered to be compatible with Subdrive 75, 1 and 15 controllers. Proven Franklin Super Stainless water-lubricated motor. matched for long life. Specified to avoid overload Small Air-E-Tainer tanks save space and money. Properly sized and precharged to 35 psi for use with these systems. Not available on LT (Less Tank) models. Copyright 211 Flint & Walling 3
Commander PRO75 DIMENSIONS Model Disch. Pump Pump Motor Motor Total Dia.* Length Dia. Length Length CP757 1-1/4 3.88 19.4 3.75 11.8 31.2 CP751 1-1/4 3.88 18.9 3.75 11.8 3.7 CP7519 1-1/4 3.88 17. 3.75 11.8 28.8 CP7527 1-1/4 3.88 15.3 3.75 11.8 27.1 CP7535** 2 3.88 11.8 3.75 11.8 23.6 * Including Cable Guard **CP7535 does not include an internal check valve. For packages less tank, use LT suffix after package part number, i.e. CP751LT. All NEMA 4 systems are less tank. Example: CP75N4LT. @ Pressure 3 4 5* 6 7 2 16.3 16. 15.6 15.1 14.6 4 16.1 15.6 15.1 14.6 14.1 6 15.7 15.2 14.7 14.2 13.7 8 15.3 14.8 14.2 13.8 13.3 1 14.8 14.3 13.8 13.3 12.9 12 14.4 13.9 13.4 12.9 12.5 14 14. 13.5 13. 12.5 12.1 16 13.5 13.1 12.6 12.1 11.7 18 13.1 12.7 12.2 11.8 11.3 2 12.7 12.3 11.8 11.4 1.9 22 12.3 11.9 11.5 11. 1.6 24 12. 11.5 11.1 1.6 1.2 26 11.6 11.1 1.7 1.3 9.8 28 11.2 1.8 1.3 9.9 9.4 3 1.8 1.4 9.9 9.5 9. 35 9.9 9.4 8.9 8.4 7.9 4 8.9 8.3 7.9 7.4 6.9 45 7.8 7.3 6.8 6.4 5.9 5 6.7 6.3 5.8 5.4 5. 55 5.8 5.3 4.9 4.4 3.7 6 4.8 4.3 3.5 1.5-65 3.3.8 - - - * Factory preset 5 PSI 324 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 CP757 COMMANDER PRO 75 CP751 CP7519 CP7527 1 2 3 4 5 6 7 Models CP757, CP757LT, CP757N4LT W/Subdrive 75 CP7535 IL338 5 1 15 2 IL339 @ Pressure 3 4 5* 6 7 2 18.6 18.1 17.8 17.2 16.8 4 18.2 17.7 17.2 16.7 16.2 6 17.8 17.2 16.8 16.2 15.8 8 17.3 16.8 16.3 15.8 15.3 1 16.9 16.4 15.8 15.3 14.8 12 16.4 15.9 15.4 14.9 14.4 14 16. 15.5 14.9 14.4 13.8 16 15.6 15. 14.4 13.9 13.4 18 15.1 14.6 14. 13.4 12.8 2 14.8 14.1 13.5 12.9 12.2 22 14.1 13.8 12.9 12.3 11.8 24 13.6 13. 12.4 11.8 11.2 26 13.1 12.5 11.9 11.3 1.7 28 12.6 12. 11.4 1.8 1.2 3 12. 11.4 1.8 1.3 9.6 35 1.8 1.1 9.5 8.8 8.2 4 9.4 8.8 8.1 7.5 7. 45 8.2 7.4 6.3 6.3 5.5 5 6.8 6.2 4. 3.9 55 5.1 3.8 * Factory preset 5 PSI 28 Models CP751, CP751LT, CP751N4LT W/Subdrive 75 4 Copyright 211 Flint & Walling 7 6 5 4 3 2 1 5 1 15 2 IL34
Commander PRO75 @ Pressure 3 4 5* 6 7 2 31.8 3. 28.5 27.2 26.3 4 3.2 28.7 27.4 26. 24.2 6 29. 27.5 26. 24.5 22.7 8 27.7 26.3 24.6 23. 21.2 1 26.5 25. 23.1 21.5 19.5 12 25.2 23. 21.6 2. 18. 14 23.7 22. 2. 18.5 16.8 16 22.1 2.2 18.5 17. 15.2 18 2.6 18.7 17.2 15.2 13.5 2 19. 17.5 15.7 13.9 11.4 22 17.7 16. 14. 11.9 7. 24 16.3 14.4 12. 9.9 26 14.6 12.5 9. 28 12.7 9.9 3 1.3 * Factory preset 5 PSI 169 Models CP7519, CP7519LT, CP7519N4LT 4 35 3 25 2 15 1 5 5 1 15 2 25 3 35 4 IL341 @ Pressure 3 4 5* 6 7 ** CP7535 does not include an internal check valve. 2 39.5 37.5 35.4 33. 3. 146 4 37.9 35.6 33.2 3.5 27.4 6 36. 33.5 3.9 28. 25. 8 34. 31.2 28.2 25.3 22.8 1 31.5 28.6 25.6 23.1 2.6 12 29.1 25.6 23.5 21.2 18.9 14 26.4 23.8 21.4 19.2 16.9 16 24.2 21.8 19.5 17.2 14.4 18 22.1 19.8 17.5 15.1 2 2. 17.9 15.3 14.5 22 18.2 15.9 1.3 24 16.2 11.8 26 13. * Factory preset 5 PSI @ Pressure 3 4 5* 6 7 2 53. 47. 4.8 34.9 27. 81 4 47.9 41.5 35.8 28.5 6 42.3 36.4 3. 8 37. 31. 1 32. 12 21. * Factory preset 5 PSI Models CP7527, CP7527LT, CP7527N4LT 4 35 3 25 2 15 1 5 5 1 15 2 25 3 35 4 45 5 2 175 15 125 1 75 5 25 Models CP7535, CP7535LT, CP7535N4LT IL342 25 5 75 IL343 Copyright 211 Flint & Walling 5
Commander PRO1 Model*** Disch. DIMENSIONS Pump Dia.* Pump Length Motor Dia. Motor Length Total Length CP17LT, N4LT 1-1/4 3.88 22.6 3.75 13.62 36.22 CP11LT, N4LT 1-1/4 3.88 2.25 3.75 13.62 33.87 CP119LT, N4LT 1-1/4 3.88 18.25 3.75 13.62 31.87 CP127LT, N4LT 1-1/4 3.88 16.85 3.75 13.62 3.47 CP135LT, N4LT** 2 3.88 12.56 3.75 13.62 26.18 * Including cable guard ** CP135 does not include an internal check valve *** All models include suffix N4LT for NEMA 4 systems or LT for NEMA 1 systems. SUBMERSIBLE PUMP COMMANDER PRO 1 11 1 CP17LT, N4LT 9 8 CP11LT, N4LT 7 CP119LT, N4LT 6 5 4 3 CP127LT, N4LT 2 CP135LT, N4LT 1 1 2 3 4 5 6 7 FLOW () il871 @ Pressure 4 5* 6 7 5 18.5 18.2 17.8 17.4 1 17.7 17.3 16.9 16.4 15 16.8 16.4 15.9 15.5 2 15.9 15.4 15. 14.5 25 14.9 14.5 14. 13.6 3 13.93 13.5 13. 12.6 35 12.95 12.6 12.1 11.7 4 12.5 11.7 11.3 11. 45 11.24 1.9 1.5 1.2 5 1.46 1.1 9.7 9.4 55 9.65 9.3 9. 8.6 6 8.87 8.5 8.1 7.7 65 7.99 7.6 7.1 6.8 7 7.5 6.7 6.4 5.7 75 6.31 5.6 4.6 3.5 8 4.44 3.3 1.9 85 1.74 *Factory preset to 5 PSI 417 Models CP17LT, CP17N4LT 1 9 8 7 6 5 4 3 2 1 5 1 15 2 25 IL872 @ Pressure 4 5* 6 7 5 17.9 17.5 17.2 16.9 1 17.1 16.9 16.6 16.3 15 16.5 16.3 15.9 15.7 2 15.9 15.6 15.3 14.9 25 15.3 14.9 14.5 14. 3 14.37 13.9 13.4 13. 35 13.43 12.9 12.4 11.9 4 12.25 11.8 11.4 1.9 45 11.31 1.8 1.4 9.9 5 1.33 9.8 9.3 8.7 55 9.17 8.6 7.7 6.7 6 7.56 6.5 5.4 65 5.1 *Factory preset to 5 PSI 351 CP11LT, CP11N4LT 1 9 8 7 6 5 4 3 2 1 5 1 15 2 25 IL873 6 Copyright 211 Flint & Walling
Commander PRO1 Models CP119LT, CP119N4LT @ Pressure 4 5* 6 7 5 29.8 28.8 27.8 26.8 1 27.6 26.5 25.6 24.5 15 25.4 24.4 23.4 22.3 2 23.2 22.1 21. 19.9 25 2.9 19.7 18.7 17.5 3 18.5 17.3 16.1 15. 35 15.9 14.8 13.7 12.7 4 13.6 12.5 11.5 1.3 45 11.2 1. 8.8 7.3 5 8.5 7. *Factory preset to 5 PSI 278 7 6 5 4 3 2 1 5 1 15 2 25 3 35 4 IL874 Models CP127LT, CP127N4LT @ Pressure 4 5* 6 7 5 37.9 36.3 34.6 32.4 1 34.1 32.1 3.1 28.2 15 29.8 28. 26.1 24.6 2 26. 24.1 22.2 2.4 25 21.9 2. 18.5 16.7 3 18.18 16.4 14.5 12.1 35 14.15 11.8 9.2 6.7 4 8.75 6.2 *Factory preset to 5 PSI 226 6 55 5 45 4 35 3 25 2 15 1 5 5 1 15 2 25 3 35 4 45 5 IL875 Models CP135LT, CP135N4LT @ Pressure 4 5* 6 7 25 52.9 48. 42.8 37.5 5 47.8 42.2 37.1 3.2 75 41.8 36.9 29.4 16.6 1 36.4 28.6 14.3 125 28.5 9.8 *Factory preset to 5 PSI **Does not include an internal check valve 12 25 2 15 1 5 1 2 3 4 5 6 7 IL876 Copyright 211 Flint & Walling 7
Commander PRO15 14 CP157 12 1 CP151 Total Head (ft.) 8 6 CP1519 CP1527 4 2 CP1535 CP1555 CP1585 25 5 75 1 125 15 175 DIMENSIONS Model Disch. Pump Pump Motor Motor Total Dia.* Length Dia. Length Length CP151 1-1/4 3.88 24.25 3.75 16.6 4.3 CP1519 1-1/4 3.88 18.25 3.75 16.6 34.3 CP1527 1-1/4 3.88 18.9 3.75 16.6 35. CP1535** 2 3.88 14.25 3.75 16.6 3.3 CP1555** 2 3.88 14.5 3.75 16.6 3.6 CP1585** 2 3.88 14.5 3.75 16.6 3.6 * Including Cable Guard ** CP1535, CP1555 & CP1585 do not include an internal check valve. For packages less tank, use LT suffix after package part number, i.e. CP151LT. All NEMA 4 systems are less tank. Example: CP151N4LT. IL331 @ Pressure 4 5* 6 7 1 18. 17.7 17.4 17.2 15 17.4 17.1 16.8 16.5 2 16.8 16.5 16.2 15.8 25 16.1 15.8 15.5 15.1 3 15.4 15.1 14.7 14.4 35 14.7 14.3 13.9 13.6 4 13.9 13.5 13.2 12.8 45 13.1 12.8 12.4 12.1 5 12.4 12.1 11.7 11.4 55 11.7 11.4 11.1 1.8 6 11. 1.7 1.4 1.2 65 1.4 1.1 9.8 9.6 7 9.8 9.5 9.2 9. 75 9.2 8.9 8.7 8.4 8 8.6 8.4 8.1 7.9 85 8.1 7.8 7.6 7.3 9 7.5 7.3 7. 6.7 95 7. 6.7 6.4 6.1 1 6.4 6.1 5.8 5.5 15 5.8 5.5 5.1 4.8 11 5.1 4.7 4.4 4. 115 4.3 3.9 3.4 2.8 12 3.3 2.7 1.7 125 1.4 *Factory preset to 5 PSI 585 Models CP157, CP157LT, CP157N4LT Total Head (ft.) 14 12 1 8 6 4 2 5 1 15 2 IL845 8 Copyright 211 Flint & Walling
Commander PRO15 @ Pressure 4 5* 6 7 1 19.2 18.8 18.6 18.4 15 18.4 18.2 17.8 17.7 2 17.8 17.7 17.3 17.1 25 17.3 16.9 17.2 16.3 3 16.7 16.2 16. 15.8 35 16.1 15.8 15.3 15.2 4 15.3 15.1 14.9 14.5 45 14.8 14.4 14.1 13.9 5 14.1 13.8 13.6 13.1 55 13.5 13.1 12.8 12.6 6 12.8 12.5 12.3 11.9 65 12.2 11.8 11.5 11.2 7 11.3 11.1 1.7 1.3 75 1.6 1.2 1. 9.5 8 9.9 9.4 8.9 8.1 85 8.7 8.1 7.5 6.5 9 7.2 6.5 5.3 95 5.3 4.5 *Factory preset to 5 PSI @ Pressure 4 5* 6 7 25 33.8 32.7 32.2 31.3 5 32.7 32. 31.2 3.3 75 32.3 31.2 3.5 29.1 1 3.9 3.3 29.3 28.6 15 29.2 28.4 27.7 26.8 2 27.4 26.6 25.8 24.8 25 25.7 24.6 23.8 22.5 3 23.5 22.4 21.5 2.5 35 21.3 2.2 19.2 17.6 4 18.9 17.3 15.6 13.9 45 15.6 13.8 12.4 1. 5 12. 9.9 *Factory preset to 5 PSI @ Pressure 4 5* 6 7 25 45.3 43.9 42.6 41.3 5 43.8 42.5 41.2 39.9 75 42.4 41.1 39.8 37.3 1 41. 39.7 38.2 36.5 15 37.9 36.1 34.6 33. 2 34.4 32.6 31.2 29.7 25 31. 29.5 27.7 26.2 3 27.4 25.8 24.7 23.5 35 24.4 23.2 21.5 19.7 4 21.3 19. *Factory preset to 5 PSI 473 28 233 Models CP151, CP151LT, CP151N4LT Total Head (ft.) Models CP1519, CP1519LT, CP1519N4LT Total Head (ft.) Models CP1527, CP1527LT, CP1527N4LT Total Head (ft.) 12 1 8 6 4 2 7 6 5 4 3 2 1 5 1 15 2 25 3 35 4 IL333 6 5 4 3 2 1 5 1 15 2 25 IL332 5 1 15 2 25 3 35 4 45 5 55 IL334 Copyright 211 Flint & Walling 9
Commander PRO15 Models CP1535, CP1535LT, CP1535N4LT @ Pressure 4 5* 6 7 25 62. 58. 56. 52. 5 58. 56. 52. 47. 75 56. 52. 47. 42. 1 52. 47. 42. 33. 125 47. 42. 33. 21. 15 42. 32. 19. 175 32. 15. *Factory preset to 5 PSI **Does not include an internal check valve 122 Total Head (ft.) 35 3 25 2 15 1 5 1 2 3 4 5 6 7 8 IL335 Models CP1555, CP1555LT, CP1555N4LT @ Pressure 4 5* 6 7 25 81. 73. 66. 57.7 5 72. 65. 56.7 44.1 75 64.3 56. 43. 1 55.4 42. 125 4.9 *Factory preset to 5 PSI **Does not include an internal check valve 98 Total Head (ft.) 25 2 15 1 5 25 5 75 1 125 IL336 Models CP1585, CP1585LT, CP1585N4LT @ Pressure 3 4 5* 122. 95. 73. 5 117. 87. 69. 1 18. 83. 64. 15 13. 78. 6. 2 97. 75. 54. 25 92. 72. 46. 3 86. 68. 38. 35 82. 63. 4 78. 55. 5 68. 45. *Factory Preset to 5 PSI **Does not include an internal check valve 64 Total Head (ft.) 175 15 125 1 75 5 25 1 2 3 4 5 6 7 8 9 1 11 12 13 14 15 16 17 IL337 1 Copyright 211 Flint & Walling
Commander PRO3 High Capacity 35-85 Stainless Steel Submersible Pumps with SubDrive 3 Variable Speed Controller 5 HP Constant Pressure Systems for Irrigation & Deep Well Applications Six systems engineered to provide a constant pressure water supply from as deep as 65 or at flows from 3 to 135. These systems are ideal for use in residential and light commercial applications, including large homes, deep wells, ground source heat pumps, lawn irrigation systems and water features. Features include dependable 4 submersible pump technology, single-phase power input and the innovative Franklin SubDrive 3 variable speed controller. These systems are designed to reduce total equipment costs, as large bulky tanks, external motor protection devices and complicated adjustments are no longer required. 6" 6" min. 6" 6" min. Clearance Pressure Pressure For For Tank Sensor Air Air Flow Pressure Shut-off Sensor 6 6 or or Less (Pressure Tank Tank to to PUMP PressureSensor)* Pressure Relief Valve MOTOR IL666 SPECIFICATIONS Input (From Power Source) Voltage...19-26 V/Single Phase Frequency...5/6 Hertz Amps (RMS)...36 Amps Power (Idle)....65 Watts Power...56 Watts @ 3 Hz Power... 46 Watts @ 8 Hz Power Factor....1 (Constant) Output (To Motor) Voltage... Variable V / Three Phase Frequency 3 HP Pump...Variable 3-8 Hz Frequency 5 HP Pump...Variable 3-7 Hz Amps (RMS)...17.8 Amps Start... High Torque - Soft Start Pressure... 25-8 PSI (preset at 5 psi) Controller Enclosure...NEMA 4 Built-in protection & diagnostics for: Surge Protection Underload - low water conditions Under voltage Short Circuit Overheated Controller w/auto compensation feature Locked Pump w/auto reverse feature Copyright 211 Flint & Walling 11
Commander PRO3 Pump Model No. 4F35S3 REQUIRED SYSTEM COMPONENTS* Pump Description 35, 1 Stage F&W Motor Model No. Franklin Motor Reference No. F&W SD3 Model No. Franklin SD3 Reference No. Pressure Tank Size (Total Capacity) 4F55S3 55, 7 Stage 4F85S3 85, 6 Stage 4F35S5 35, 16 Stage 13747 23431752 21825 23431726 2 Gallon 4F55S5 55, 11 Stage 4F85S5 85, 1 Stage The pressure tank pre-charge setting should be 7% of the system pressure sensor setting *All system components must be ordered separately. **Does not include an internal check valve DIMENSIONS Model Disch. Pump Pump Motor Motor Total Dia.* Length Dia. Length Length 4F35S3 23.6 45.8 4F55S3 22. 44.2 4F85S3 23.9 46.1 2 3.88 3.75 22.2 4F35S5 33.2 55.4 4F55S5 3.4 52.6 4F85S5 35. 57.2 * Including Cable Guard Pumps do not include an internal check valve Wire Sizing The maximum allowable wire lengths for connection of motor to the CP Water SubDrive 3 are given in the following table. Copper Wire Size (AWG 14 12 1 8 6 4 Length () 14 23 37 59 92 143 Length (Meters) 42 7 112 179 28 435 COMMANDER PRO 3 85 8 75 4F35S5 7 65 6 55 5 45 4F55S5 4 35 3 4F55S3 25 4F85S5 2 15 4F85S3 1 4F35S3 5 2 4 6 8 1 12 14 16 IL669 4F35S3 with 5 HP Motor @ Pressure 3 4 5* 6 7 8 25 63.5 62. 6.5 59. 57. 55.5 5 61.5 6.5 59. 57. 56. 53.5 75 6.5 59. 57. 55.5 53. 52. 1 58. 56.5 55.5 54. 52. 49. 15 55.5 53. 51.5 49. 47.5 44.5 2 51. 48.5 47. 44. 42.5 4. 25 46. 44. 42.5 4. 38. 35. 3 43. 39. 37. 34.5 32.5 27.5 35 36.5 33.5 32. 24.5 18.5 4 31.5 29. 17. 45 15. *Factory Preset @ 5 PSI 233 6 55 5 45 4 35 3 25 2 15 1 5 1 2 3 4 5 6 7 IL64 12 Copyright 211 Flint & Walling
Commander PRO3 4F55S3 with 5 HP Motor @ Pressure 3 4 5* 6 7 8 25 95.5 92.5 88. 85. 79. 75.5 5 94. 87.5 84. 79. 75. 7.5 75 86.5 83.5 79. 75. 69.5 64. 1 84. 78.5 74.5 7. 64. 57. 15 75. 67.5 64. 57. 53.5 46. 2 62.5 55. 52.5 46. 3. 25 5. 44. 25. 3 2. *Factory Preset @ 5 PSI 157 4 35 3 25 2 15 1 5 1 2 3 4 5 6 7 8 9 1 11 IL641 4F85S3 with 5 HP Motor @ Pressure 3 4 5* 6 7 8 25 124. 113. 97. 84. 74. 66.5 5 111. 96. 84. 74. 65.5 57.5 75 96. 82. 73.5 65. 55. 43. 1 82. 73. 65. 54. 4.5 125 72. 64. 52.5 4. 15 63. 52. 39.5 175 51.5 29. 2 35. *Factory Preset @ 5 PSI 119 3 25 2 15 1 5 2 4 6 8 1 12 14 16 IL642 4F35S5 with 5 HP Motor MAXIMUM @ PRESSURE SENSOR SETTING 3 4 *5 6 7 8 25 53.5 52.5 51.5 5.5 49.5 48.5 5 52. 51.5 5.5 49.5 48.5 47.5 75 51. 5.5 49.5 48.5 47.5 46. 1 5.5 49.5 48.5 47.5 46.5 45. 15 48. 47.5 46. 45. 44. 42.5 2 46. 45. 44. 42.5 41. 4. 25 43.5 42. 41. 4. 38.5 37. 3 41. 39.5 38.5 37. 35.5 34. 35 38. 37. 35.5 34. 32.5 31. 4 35.5 34. 32. 31. 28.5 27. 45 32. 3. 28.5 26.5 24. 21.5 5 28. 26. 24. 21. 16.5 55 23.5 2.5 14.5 6 12.5 *Factory Preset @ 5 PSI 291 7 65 6 55 5 45 4 35 3 25 2 15 1 5 5 1 15 2 25 3 35 4 45 5 55 6 65 7 IL644 Copyright 211 Flint & Walling 13
Commander PRO3 4F55S5 with 5 HP Motor @ Pressure Sensor Setting 3 4 *5 6 7 8 25 84 82 79 75 72 68 5 82 78 75 71 68 64 75 77 75 71 68 64 6 1 75 71 67 64 59 57 15 67 63 59 56 52 49 2 59 55 52 49 45 41 25 52 48 45 41 33 3 44 39 32 35 31 *Factory Preset @ 5 PSI 188 5 45 4 35 3 25 2 15 1 5 1 2 3 4 5 6 7 8 9 1 11 IL645 4F85S5 with 5 HP Motor @ Pressure Sensor Setting 3 4 *5 6 7 8 25 115 18 1 91 77 68 5 17 1 88 76 67 59 75 99 87 76 66 58 52 1 86 75 66 58 51 45 125 74 65 57 51 44 37 15 64 57 5 44 36 27 175 56 5 43 36 27 2 49 43 35 26 225 42 34 25 25 34 24 275 25 *Factory Preset @ 5 PSI (PSI 15 4 35 3 25 2 15 1 5 1 2 3 4 5 6 7 8 9 1 11 12 13 14 15 IL646 14 Copyright 211 Flint & Walling
Commander Pro Product Reference Guide CP PACKAGE SUBDRIVE PUMP END MOTOR MODEL SUBDRIVE PART # DESIGN PART # STAGES PART # HP CP757LT 7 SD75 2143 7 SS 4F7S7 14 137458 1.5 CP751LT 1 SD75 2143 1 SS 4F1S7 12 137458 1.5 CP7519LT 19 SD75 2143 19 SS 4F19S1 9 137458 1.5 CP7527LT 27 SD75 2143 27 SS 4F27S1 7 137458 1.5 CP7535LT 35 SD75 2143 35 SS CP7535RP 3 137458 1.5 CP17LT 7 SD1 2345 7 SS 4F7S1 18 137462 2 CP11LT 1 SD1 2345 1 SS 4F1S1 15 137462 2 CP119LT 19 SD1 2345 19 SS 4F19S15 12 137462 2 CP127LT 27 SD1 2345 27 SS 4F27S15 1 137462 2 CP135LT 35 SD1 2345 35 SS 4F35S1 4 137462 2 CP157LT 7 SD15 2475 7 SS 4F7S15 24 139424 3 CP151LT 1 SD15 2475 1 SS 4F1S15 2 139424 3 CP1519LT 19 SD15 2475 19 SS 4F19S2 16 139424 3 CP1527LT 27 SD15 2475 27 SS 4F27S2 12 139424 3 CP1535LT 35 SD15 2475 35 SS 4F35S15 5 139424 3 CP1555LT 55 SD15 2475 55 SS 4F55S15 4 139424 3 CP1585LT 85 SD15 2475 85 SS CP1585RP 3 139424 3 CP757N4LT 7 SD75N4 22956 7 SS 4F7S7 14 137458 1.5 CP751N4LT 1 SD75N4 22956 1 SS 4F1S7 12 137458 1.5 CP7519N4LT 19 SD75N4 22956 19 SS 4F19S1 9 137458 1.5 CP7527N4LT 27 SD75N4 22956 27 SS 4F27S1 7 137458 1.5 CP7535N4LT 35 SD75N4 22956 35 SS CP7535RP 3 137458 1.5 CP17N4LT 7 SD1N4 2346 7 SS 4F7S1 18 137462 2 CP11N4LT 1 SD1N4 2346 1 SS 4F1S1 15 137462 2 CP119N4LT 19 SD1N4 2346 19 SS 4F19S15 12 137462 2 CP127N4LT 27 SD1N4 2346 27 SS 4F27S15 1 137462 2 CP135N4LT 35 SD1N4 2346 35 SS 4F35S1 4 137462 2 CP157N4LT 7 SD15N4 22957 7 SS 4F7S15 24 139424 3 CP151N4LT 1 SD15N4 22957 1 SS 4F1S15 2 139424 3 CP1519N4LT 19 SD15N4 22957 19 SS 4F19S2 16 139424 3 CP1527N4LT 27 SD15N4 22957 27 SS 4F27S2 12 139424 3 CP1535N4LT 35 SD15N4 22957 35 SS 4F35S15 5 139424 3 CP1555N4LT 55 SD15N4 22957 55 SS 4F55S15 4 139424 3 CP1585N4LT 85 SD15N4 22957 85 SS CP1585RP 3 139424 3 NOTES: Larger pump ends are used on all 19 & 27 Commander Pro CP Packages. All complete Commander Pro CP Packages carry a 5 year limited warranty on pump end and motor, and a 3 year limited warranty on Franklin control. Copyright 211 Flint & Walling 15
Pressure Tank Charts The Commander Pro complete packaged systems need only a small pressure tank to maintain constant pressure. (See table below for recommended tank size.) For pumps rated 12 gpm or more, a slightly larger tank is recommended for optimum prssure regulation. The Commander Pro systems can also use an existing tank with a much larger capacity. XMINIMUM PRESSURE TANK SIZE (TOTAL CAPACITY) PUMP FLOW RATING CONTROLLER MODEL MINIMUM TANK SIZE Less than 12 gpm SubDrive 75 2 gallons SubDrive 1 4 gallons SubDrive 15 4 gallons SubDrive 3 8 gallons 12 gpm and higher SubDrive 75 4 gallons SubDrive1 8 gallons SubDrive15 8 gallons SubDrive3 2 gallons SubDrive 2W Constant Pressure Part #23467 For Single-Phase, 2-Wire Applications Designed to handle single-phase two-wire pumping systems up to 1 HP, the SubDrive2W is a constant pressure system that offers outdoor rated NEMA 3R enclosure protection. Ideal for applications where constant pressure is desirable: residential water systems, landscaping, water treatment and geothermal applications where a two-wire motor is currently installed. SubDrive2W features: Single-phase,2-wire motor constant pressure system 1/2 HP, 3/4 HP or 1 HP performance Easy to isntall NEMA 3R rated enclosure Plug & play Built-in diagnostic protection UL and CUL listed SubDrive2W Input (From Power Source) Voltage 23 V (±1%) 1-Phase Frequency 6/5 Max Amps (RMS) <12 A (For circuit breaker sizing) Output (To motor) Voltage Variable/1-Phase/FE Motor Frequency Variable (3-6 Hz) 6. A (1/2 HP) Max Amps (RMs) 8. a (3/4 HP) 9.8 A (1 HP For use with: Pump Rating 1/2, 3/4 or 1 HP (Selectable) Flint & Walling 95 North Oak Street Kendallville, IN 46755 8-345-9422 flintandwalling.com 16 Copyright 211 Flint & Walling