PumpAgents.com - Click here for Pricing/Ordering SERIES CS CLOSE COUPLED TURBINE PUMPS CS- 7 RPM - 60Hz. CS - 0 RPM - 60Hz. (See Individual curves for symbol number) Symbol No. 6 7 0 6 7 MAXIMUM HEAD H.P. Catalog Number - Phase - Phase / / / / / / / / / CSM CS6M CS6M CS7M CS7M CSM 0CSM CSM 0CS6M CS6M 0CS6M CS7M 0CS7M 0CSM For Standard Pumps with ODP Motors CSM CS6M CS6M CS7M CS7M CSM 0CSM CSM 0CS6M CS6M 0CS6M CS7M 0CS7M 0CS7M 0CSM 0CSM 0CSM 0CSM 0CSM CS - 00 RPM - 0Hz. (See Individual curves for symbol number) Symbol No. 6 7 0 MAXIMUM HEAD H.P..0.6.0..0.6..0.6.0..0.0.0 Catalog Number L0CSM L0CSM L0CSM LCSM L0CSM L0CSM LCS7M L0CS7M L0CS7M L0CS6M LCS6M L0CS6M L0CSM LCSM Pump numbers,, & are the only pumps available in single phase /0 volt. All of the pump above are available with stuffing box.
60HZ PERFORMANCE CLOSE COUPLED TURBINE PUMPS 70 RPM 0 RPM Catalog Number HP Tappings Suct. Disch. 60 HZ - PERFORMANCE & SELECTION CHART PSI FEET.6 0 7. 0 6 60. 00. 6. 0 TOTAL HEAD -Phase -Phase CAPACITY IN G.P.M. CSM CSM / CS6M CS6M CS7M CS7M CS6M CS6M CS7M CS7M / / / / / 7. 7 6.6 00 7..........6 7. 7. 0. 0. 6. 6... 6. 6..... 7. 7. CSM CSM /.. 0..0. 0CSM CSM 0CS6M CS6M 0CS6M CS7M 0CS7M 0CSM 0CSM CSM 0CS6M CS6M 0CS6M CS7M 0CS7M 0CS7M 0CSM 0CSM 0CSM 0CSM 0CSM / / / / 6 6 6 0. 0. 0. 6. 6. 6... 0.6 0.6....6.6.6..... 0. 0........6.6.6 0. 0...... 7. 7. 7..6.6.6.6...7.7 6. 6...... 6. 6. 7. 7..... 6 6..... 0.. 0. 0. 0. 7....6... 0 00 0. 7.7 7.7 7. 7. 7. 7..6 0 0.7 0.7 0. 0..7..7.7..7........ 7. 6. 6. 6. 6..6.7... 0.7 0 70 RPM 0 RPM Catalog Number HP Tappings Suct. Disch. 60 HZ - PERFORMANCE & SELECTION CHART TOTAL HEAD kpa Meters 6.. 7. 0. 7. 7.7. 7 6.0 -Phase -Phase CAPACITY IN L.P.S. CSM CSM / 0.6 0.0 0.7 0.0 0.7 0. 0. 0..6 CS6M CS6M CS7M CS7M CS6M CS6M CS7M CS7M / / / / / 0. 0. 0.6 0.6 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. CSM CSM / 0. 0.7 0.6 0.6 0. 0CSM CSM 0CS6M CS6M 0CS6M CS7M 0CS7M 0CSM 0CSM CSM 0CS6M CS6M 0CS6M CS7M 0CS7M 0CS7M 0CSM 0CSM 0CSM 0CSM 0CSM / / / / 0.6 0.6.00.00.00....67.67.67.0.0 0.66 0.66 0. 0. 0.....60.60.60.. 0.6 0.6 0. 0. 0......... 0. 0. 0. 0. 0..0.0.0....0.0 67 6.6 77.. 0. 0. 0.0 0. 0. 0.0 0. 0.6 0. 0. 0. 0.7 0. 0.6 0.6 0.0 0.0 0.0.0.0....7.7 0. 0. 0.0 0. 0. 0.0 0.7 0.7 0.7 0.7 0.7 0.7 6. 66. 0. 0. 0.7 0.6 0. 0. 0.6 0.6 0 06.6 0.67 0.67 0.66 0.6 0.6 0..00 0.6 0..00 0.6 0. 0. 0.6 0. 0.0 0.7 0.7.........6..0.0.0.67.67.6..0..0..0.6 NOTE: When pumping hot water over 0 F (. C), check the NPSH available in the pumping system against the required pump NPSH shown on pump performance curves. Available NPSH must be greater than required NPSH.
FEATURES MAXIMUM OPERATING CONDITIONS TEMPERATURE F (07 C) (For Standard Buna-N Seal) INLET PRESSURE 00 PSI (60kPa) CASING WORKING PRESSURE 0 PSI (7kPa) MOTOR INFORMATION CS Series: Single Phase motors are /0-0 Volt, 60Hz, 70RPM Three Phase motors are 0-0/60 Volts, 60/0Hz, 70/0RPM BURKS exclusive unique regenerative type turbine pumps are designed to handle clear water and many other non-abrasive, lower viscosity liquids on high pressure, low capacity applications with the greatest possible efficiency. BURKS is the only turbine pump with Life-Lok External Impeller Adjustment feature that allows readjustment of impeller without disturbing piping, disassembling pump or replacing parts. Gives up to 0% longer service life than turbine pumps of other designs. Self-Priming Compact, Space-saving size No coupling - eliminates misalignment problels Dependable carbon/ceramic mechanical shaft seal for temperatures to F (07 C). Bronze impeller with Monel blades - the only moving part Bronze raceway with cast-in vortex pockets - will not vapor lock #0 Stainless Steel pump shaft Easy to service Every pump factory tested Available Bronze fitted, All Bronze, Stainless Steel CS Series: Single Phase motors are /0-0 Volt, 60 Hz, 0RPM Three Phase, / & HP. - 0-0/60 Volt, 60/0 Hz., 0/00 RPM Three Phase & HP - 0-0/60 Volt, 60 Hz, 0RPM Standard pump motors have open drip proof construction and are rated with jet pump service factors for continuous duty operation at all ratings shown. Single phase motors are capacitor start/induction run with buit-in overload protection. Three phase motors require a magnetic type starter which provides full -leg overload protection. Failure to use the correct starter and overloads will void the warranty. FOR TEMPERATURES TO 00 F (60 C). Series CS Pumps are available in a Jacketed Seal Cavity design for pumping hot oil, hot water and heat transfer fluids in common use in high temperature heating or cooling applications. This feature greatly extends seal life in high temperature applications. To order, add suffix "J" to pump catalog number for temperatures below 00 F (0 C) and add suffix "JK" to pump catalog number for temperatures over 00 F (0 ). Example: CSMJ. See Section on High Temperature Pumps for more information. MATERIALS OF CONSTRUCTION PART BRONZE FITTED ALL BRONZE STAINLESS STEEL Frame Cast Iron Bronze #6 Stainless Case Cast Iron Bronze #6 Stainless Impeller Bronze Bronze #0 Stainless (Monel Blades) (Monel Blades) Raceway Bronze Bronze #0 Stainless Shaft #0 Stainless #0 Stainless #0 Stainless Shaft Seal Carbon-Ceramic S. Steel-Buna-N Carbon-Ceramic S. Steel-Buna-N Carbon-Ceramic S. Steel-Buna-N
DIMENSIONS SERIES HP Tappings DIMENSIONS IN INCHES CS / / / CS Disc. / / / / / / / Suct. PH A 7 / 7 / / 6 /6 /6 PH A 6 / 6 / / 6 /6 /6 / 6 0 /6 B 6 / 6 / 6 / 6 / 6 / 6 / 6 / PH C 6 / 6 / 6 / /6 /6 PH C D E F G H J K 6 / 6 / 6 / 6 / 6 / 6 / 6 / / / / / / / / 6 / 6 / 6 / 6 / 6 / 6 / 6 / / / / / / / / 7 /6 7 /6 7 / 6 7 /6 7 /6 7 / 6 7 /6 / / / / / / / SERIES HP Tappings DIMENSIONS IN MILLIMETERS CS / / -/ CS Disc. / / / / / / / Suct. PH A 7 7 6 6 PH A 6 6 B 6 6 6 6 6 6 6 PH C 6 6 6 PH C D E F G H J K 6 6 6 6 6 6 6 7 7 7 7 7 7 7 6 6 6 6 6 6 6 A strainer, approximately 0 mesh, should be installed on the suction side of the pump to prevent chips, scale or hard foreign particales from entering the pump and damaging the raceway and impeller.
60HZ PERFORMANCE CURVE CS SERIES CLOSE COUPLED TURBINE PUMPS
TCCP- RPM & PHASE 7 RPM Single Phase (ODP) 7 RPM Three Phase (ODP) 0 RPM Single Phase (ODP) 0 RPM Three Phase (ODP) 0 RPM Three Phase (TEFC) - MOTORS PART 7 RPM - OPEN DRIP PROOF 077 07 07 000 0 RPM - OPEN DRIP PROOF 00 007 00 006 00 00 0 0 0 RPM - TOTALLY ENCLOSED 0 0 06 HP / / / / -/ -/ -/ WITH STUFFING BOX WITH MECHANICAL SEAL SERIES: CS - CLOSE COUPLED TURBINE PUMPS File: CS.dwg
PumpAgents.com - Click here for Pricing/Ordering SYMBOL PART QUANTITY DESCRIPTION SYMBOL PART QUANTITY DESCRIPTION 6 7 0 0 00 006-A 0 077 07 07 0 0-C 0 070-B 06 00 07 07 0 Ball Bearing - Pump End Ball Bearing - Switch End (Not Shown) Screw, Impeller Adjusting Slinger Washer Frame (for mechanical seal) Frame (for stuffing box) Adjusting Screw Lock Mechanical Seal - Buna N Mechanical Seal - Viton Mechanical Seal - EPT Plug, /" Case Plug, /- Impeller Lock Nut O-Ring Gasket - Buna N O-Ring Gasket - Viton O-Ring Gasket - EPT O-Ring Gasket - Teflon 6 0 0 SA07- SA07-6 SA07-7 SA07-HT- SA07-HT- 0 0 06 0 Impeller for CSM Impeller for CS6M Impeller for CS7M Impeller for CSM Impeller for CSM Screw, Raceway to Frame Suction Sleeve - Buna N (std) Suction Sleeve - Viton Suction Sleeve - EPT DIFFERING PARTS FOR ALL BRONZE CONSTRUCTION 077-A 07-A 070-C 0-B 077 Frame (for mechanical seal) Frame (for stuffing box) Case Screw, / x /" Lg Screw, 7/6- x -/" Lg., S.S. 6 7 0 0 0-B 0700 0 06 07 7-A 0 0777 07-07-6 07-7 07-07- Screw, /" x /" Gland, Stuffing Box Gland Bolt Gland Nut Packing Key, Woodruff (As Shown) (Repair Kits Only) Key, Square Screw, 7/6- x -/" Lg Screw, #0 x /" Lg Raceway for CSM Raceway for CS6M Raceway for CS7M Raceway for CSM Raceway for CSM REPAIR KITS for CT SERIES PUMPS CATALOG NO. 0-0-6 0-7 0-0- FOR USE WITH CSM CS6M CS7M CSM CSM Kit Includes: Impeller, Raceway, Shaft Seal, O-Ring Gasket, Suction Sleeve, Raceway Screws, Impeller Locknut, Shaft Key and instructions. TCCP-77 SERIES: CS - CLOSE COUPLED TURBINE PUMPS Standard impellers are suitable for fluid temperatures to 0 F. For higher temperatures, add the designation "HT" to impeller part number. This includes all "MJ" Jacketed Seal Pumps. Example: SA-7HT-
For technical advice or service please take your pump into your local pump service center. To order pump or parts or for pricing please go to the following links : Burks Pumps Home >> Burks Pumps stock list >>