SAND CAST ALUMINUM DIFFERENTIAL COVERS Dana Spicer AMC Dana Spicer 20 Fits Jeep CJ 5 and CJ 7, 1976-1985. Part #5048 Dana 44 10 Bolt Fits front 1964 to 1978 4WD Suburban, Blazer, some front and rear on Jeeps, front on Ford and Dodge trucks. Volume: 0.25 qt. Part # 6057 Dana 60, 70 Fits 2002 & older Dodge Ram 2500, Ford E250/ E350, many others. Part # 9426 Ford Dana 25, 27, 30 10 Bolt Fits many Jeeps, Pre-1970s Broncos. Part # 5058 Dana 35 Fits many 1985 & newer Jeep Wrangler, Cherokee, Grand Cherokee. Part # 5062 Dana 44 10 Bolt Fits IH Scout front and rear, some front and rear on Jeeps, front on Ford and Dodge trucks. Volume: 0.25 qt. Part # 5055 Ford 7.5 Fits many Ford Rangers, Bronco IIs, Mustangs. Volume: 0.4 qt. Part # 7043 Ford 7.5 Fits many Ford Rangers, Bronco IIs, Mustangs. Volume: 0.4 qt. over stock Part # 9593 Ford 8.8 Fits many F150, Ranger, Explorer, and some Mustang. Part # 7064 Ford 8.8 Fits many F150, Ranger, Explorer, and some Mustang. Part # 9519 Dana Super 44/226 Fits 2006-2010 Jeep Grand Cherokee SRT8 and Commander. Volume: 0.7 qt. Part #11045 Dana 50, 60 10 Bolt Front Fits 66-97 Ford F250 & F350 & 75-99 Dodge 1 ton trucks. Part # 6063 Dana 50, 60 10 Bolt Front Fits 99 and newer Ford F250/F350, 94-02 Dodge Ram 2500/3500. Part # 10737 Ford 8.8 Super HD 12 Bolt Fits 2015 and newer F150, and some Mustang. Part # 11145 Ford 9.75 Fits some F150, Expedition and Navigator. Part # 7092 Ford 9.75 Fits some F150, Expedition and Navigator. Part # 9594 Ford 10.25, 10.5 Fits Ford F250 & SRW F350, Excursion. Part # 7086 Hummer, Nissan Dana 60/70 Fits 2002 & older Dodge Ram 2500, Ford E250/ E350, many others. Part # 6059 Dana 80 Fits 1999 to 2016 Ford F350 Dually, 02 & older Dodge Ram 3500, 95-00 GM Dually. Part # 9520 Dana 80 Fits 1999 to 2016 Ford F350 Dually, 02 & older Dodge Ram 3500, 95-00 GM Dually. Part # 6065 Ford 10.25, 10.5 Fits Ford F250 & SRW F350, Excursion. Part # 9513 Ford 10.25, 10.5 Fits Ford F250 & SRW F350, Excursion. Part # 10816 Hummer H1 12 Bolt Fits Hummer H1 front and rear. Part # 11155 Nissan Titan Fits 2004-2015 Titan. Part # 10756 Call 800.335.4345 www.yourcovers.com
SAND CAST ALUMINUM DIFFERENTIAL COVERS Chevy, GM GM 7.5, 7.625 Fits some 84-04 S10/ S15, Blazer, Vans, El Camino, Camaro. Part # 6086 GM 7.5, 7.625 Fits some 84-04 S10/ S15, Blazer, Vans, El Camino, Camaro. Part # 9401 GM 8.875 Truck Fits 1963-1982 GM C/K Truck, Blazer, Suburban. Volume: 1 qt. Part # 6058 GM 8.875 Car Fits 67-72 Camaro, 65-72 Chevelle, and El Camino. Volume: 1 qt. Part # 6027 GM 9.5, 9.76 Fits 2014 and Newer Silverado and Sierra 1500. Part # 11129 GM 10.5 Fits Silverado & Sierra 2500HD & 3500 with 6.0, C/K2500 & 3500. Volume: 1 qt. Part # 6060 Chrysler, Dodge GM 8.5, 8.625 Fits C/K1500, Silverado & Sierra 1500, ½ ton Tahoe, Yukon, Avalanche, & Suburban. Part # 6082 GM 8.5, 8.625 Fits C/K1500, Silverado & Sierra 1500, 1/2 ton Tahoe, Yukon, H3, Avalanche, & Suburban. Part # 10815 GM 8.5 10 Bolt Front Fits 4WD 1977-88 1/2 ton trucks and 1977-91 Suburban, 3/4 ton, and 1 ton trucks. Volume: 0.5 qt Part # 6077 Dodge 8.0 12 Bolt Front Fits 2001-11 Ram 1500, some Dakotas and Durangos. Volume: 0.25 qt. Part # 11046 Dodge Corp. 8.25 Fits 1990 to 2012 Dakota, 1990-2004 Durango, Jeep Liberty, some Cherokees. Part # 9864 Dodge Corp. 9.25 Fits Ram 1500, some Dakotas and Durangos. Volume: 0.7 qt. Part # 9518 GM 9.5 Fits Silverado & Sierra 1500HD & 2500, C/K2500, Suburban. Volume: 1 qt. Part #6070 GM 9.5 Fits Silverado & Sierra 1500HD & 2500, C/K2500, Suburban. Volume: 1 qt. Part # 9504 GM 9.5 Fits Hummer H2, Silverado & Sierra 1500HD & 2500, C/K2500. Part # 10303-2 AAM 9.25 14 Bolt Front Fits 2003-2013/14 4WD Dodge Ram 2500 & 3500. Part # 11118 Dodge AAM 9.25 2013+ 12 Bolt Front Fits 2013 & newer Ram 3500, and 2014 & newer Ram 2500. Volume: 4 oz. Part # 11136 AAM 10.5 Fits 2003 and newer Dodge Ram 2500 & 3500 with std output diesel or Hemi engines. Part # 10302 GM 10.5 Fits Silverado & Sierra 2500HD & 3500 with 6.0, C/K2500 & 3500. Volume: 1 qt. Part # 9369 AAM 11.5 Fits 2001 and newer GM Silverado & Sierra 2500HD & 3500 with Duramax or 8.1. Volume: 1 qt. Part # 9511 GM Torsen Fits 2003-2006 SSR with automatic, some Colorado, Canyon, Envoy, Trailblazer. P/N 11035 AAM 11.5 Fits 2003 and newer Ram 3500 and 2001-13 Ram 2500 with HO diesel engines. Part # 10361 AAM 11.5 292mm 2014+ Fits 2014 and newer Ram 2500. Clears pan hard rod and sway bar. Volume: 0.5 quarts to factory fill line. Part # 11147 www.yourcovers.com Call 800.335.4345
SAND CAST ALUMINUM TRANSMISSION PANS Chrysler, Dodge, Jeep, and Mercedes Dodge 727, 518 (46RH, 46RE), 618 (47RH, 47RE), 48RE Fits 2007 & older Ram with diesel, V10, & 5.9 gas, 2003 & older Dakota, Durango & Vans with 5.9. Volume: 2 qts. Part # 9393 Dodge 68RFE, 545RFE, 45RFE Fits 2013 to 2017 Ram 2500/3500 diesels, some Ram 1500, Dakota, Durango and Jeeps. Volume: 3.1 qts. for 2WD, 2.5 for 4WD Part # 10304 Dodge 42RLE Fits many 2004 to 2011 Jeep Wrangler & Liberty, Dodge Dakota, Durango & Nitro. Volume: 1-1 1/2 qts Part # 11044 Dodge A500, 42RE, 44RE, 40RH, 42RH Fits Dakota & Ram 1500 with V6 or 5.2 V8, Jeep Cherokee & Grand Cherokee with this transmission. Volume: 2 qts. Part # 9862 Dodge 68RFE, 545RFE, 45RFE Extra Fits 2007 to 2012 Ram 2500/3500 diesels, some Ram 1500, Dakota, Durango and Jeeps. Volume: 4.5 qts. for 2WD, 4 qts for 4WD Part # 11039 Custom Gasket available 722.6/NAG1 Fits many 2006 to 2013 Grand Cherokee, Magnum, Charger, Challenger, Mercedes AMG cars. Volume: 1 1/2 to 2 qts. Part # 11117 Ford Dodge 68rfe, 545rfe, 45rfe with Step Fits Ram 1500 Hemi, Dakota, and Durango. Part # 11078 Dodge 68rfe, 545rfe, 45rfe with Step, Fits Ram 1500 Hemi, Dakota, and Durango. Volume: 2 qts. Part # 11079 Aisin AS68RC Fits some 2007 to 2012 Ram diesel trucks Volume: 3-4 qts. Part #11139 Aisin AS69RC Fits 2013 and newer Ram 3500, 4500, 5500 Cummins diesel trucks. Volume: 3-4 qts. Part # 11142 Custom Gasket available Custom Gasket available 722.6/NAG1 Middle Fits 2004 to 2013 Sprinter Vans and some Jeep, Dodge, Chrysler and Mercedes SUVs. Volume: 2-2.5 qts. Part #11124 722.6/NAG1 Fits 2012 and newer Jeep Wrangler, and some Mercedes, Dodge, and Chrysler cars. Volume: Stock -.5 qts.. Part # 11132 Ford AOD, AODE, 4R70W, 4R75W Fits 1981-1992 Mustang, Thunderbird, Crown Vic, LTD. Volume: Stock Part # 9324-1 AOD or Part # 9324-2 AODE, 4R70 Ford C4 Fits 1965-1981 vehicles with C4 transmission. Outside depth 4.3. Volume: 2 qts. Part # 10453-1 Case Fill Part # 10453-2 Pan Fill Ford AOD, AODE, 4R70W, 4R75W Fits some 1981 to 2014 F150, E150, Expedition, 81-95 Mustang. Volume: 2-2.5 qts. Part # 9685-1 AOD or Part # 9685-2 AODE, 4R70 Ford A4LD, 5R44E, 4R55E, 4R44E, 5R55E Fits 1985-2012 Fords such as models of Bronco II, Explorer, Ranger, Mustang. Volume: 3 qts. Part # 9614-2 Ford 5R110 TorqShift Fits 2003-2007 F250, F350, E350. Volume: 4.5 qts. Part # 9973 Ford C6 Fits 1960s and 70s full size cars (Torino, Thunderbird, Galaxie). Volume: Stock to 1 qt. Part #11064 Ford 6R80 Fits 08 & newer Ford F150, Expedition, Navigator, Explorer. Volume: 3 qts. Part # 11089 Ford 5R110 TorqShift Late Model, Fits some 2008-2010 F250, F350, E350. Volume: 4 qts. Part #11049 Ford C6 Fits 1988 and older F250 & F350, E350, motorhomes, and Bronco. Volume: 2.5 qts. Part # 9592 Ford E40D, 4R100 2WD & 4WD Fits 1989-2004 F250, F350, E350, Excursion, Lincoln Navigator. Volume: 3-3.5 qts. Part # 9323 Ford 6R140 TorqShift Fits some 2011 & newer Super Duty Ford trucks, gas and diesel Volume: 3.4 qts. Part # 11085 Call 800.335.4345 www.yourcovers.com
SAND CAST ALUMINUM TRANSMISSION PANS GM, Chevy GM Turbo 350 Fits vehicles with the TH350 transmission. Outside depth 2 3/8. Part # 9589 GM 700R4, 4L60, 4L60E - Early Model Fits GM vehicles with these transmissions. Volume: 4 qts. Part # 8650-1 GM 4L80E, 4L85E For Cars, H1 Fits GM vehicles with these trans. Outside depth 3 3/8. Volume: 1.5 qts. Part # 9313 GM Turbo 350 Fits vehicles with the TH350 transmission. Outside depth 3 3/4. Volume: 2 qts. Part # 9684 GM Turbo 400 Fits vehicles with the TH400 transmission. Outside depth 2.1. Part # 9591 GM Turbo 400 Fits vehicles with the TH400 transmission. Outside depth 3 3/8. Volume: 2 qts. Part # 9683 GM 4L60E, 4L65E, 4L70E, 4L75E - Late Model Clears exhaust cross-over and frame cross members. Volume: 1.5 qts. Part # 9427 GM 425 FWD Transaxle Fits 1966-1978 Olds Toronado, 1967-1978 Cadillac Eldorado. Part # 7873 GM 200-4R Fits 1982-1990 Buick and GM vehicles, outside depth 3 3/4. Volume: 2.5 qts. Part # 9917 GM 4L80E, 4L85E - Early Model Fits GM vehicles with 1996 and older trans. Outside depth 4. Volume: 3.75 qts. Part # 9167 GM 4L80E, 4L85E - Late Model Fits 1997 to 2008 C/K 2500 & 3500, Silverado 1500HD, 2500 & 3500. Volume: 3.25 qts. Part # 9437 GM 6L80 Fits 2006 & newer GM cars. Part # 11087 Nissan Toyota Custom Gasket available GM 700R4, 4L60, 4L60E, 4L65E Fits cars with these transmissions. Outside depth 2 7/8. Part # 9297 C5 Corvette 4L60E Fits 1997-2004 C5 Corvettes. Fill port on the side of the pan. Volume: 3.5 qts. Part # 8650-3 Nissan RE5-RO5A For Cars, Skid Plates Fits 350Z, Infiniti, Titan. Volume: 1 qt. Part # 11091 Toyota AB60E, AB60F Fits 2007 to 2015 Tundra 5.7, and some Landcruiser, Sequoia and Lexus LX570. Includes custom gasket. Volume: 3.25 qts. Part # 11151 GM 200-4R Fits 1982-1990 Buick and GM vehicles. Volume: Stock Part #11070 Allison 1000 Fits 2001 & newer Silverado & Sierra 2500HD & 3500 with Duramax & 8.1. Volume: 3.25 qts. Part # 9517 Nissan RE5-RO5A Fits 2004-2015 Titan, Armada. Volume: 3.5 qts. Part # 11037 GM 6L80 Fits 2006 & newer GM trucks and SUVs. Volume: 2 qts. Part # 11025 GM 6L90 Fits 2007 & newer GM trucks & SUVs, HD models, gas engine. Volume: 2.5 qts. Part #11036 Nissan RE5RO5A, With Clearance Fits 2005 & newer Frontier, Pathfinder, Xterra, Equator. Volume: 1.1 qts. Part # 11101 www.yourcovers.com Call 800.335.4345
SAND CAST ALUMINUM VALVE COVERS Chevy Small Block Standard Perimeter Mount, 1959-86 Heads CHEVROLET Script Perimeter mount style for 1959-1986 heads. Mid height design clears most roller rockers. Location on intake manifold side can be machined for PCV/ breathers. Part # 11106 CORVETTE Script & Fins Perimeter mount style for 1959-1986 heads. Mid height design clears most roller rockers. Location on intake manifold side can be machined for PCV/ breathers. Part # 11026 FORD Script Pad Raised fins and pad for oval Ford emblem (sold separately). Perimeter mount style for 1959-1986 heads. Mid height design clears most roller rockers. Location on intake manifold side can be machined for PCV/breathers. Part # 8357-6 CHEVROLET Script & Fins Perimeter mount style for 1959-1986 heads. Mid height design clears most roller rockers. Location on intake manifold side can be machined for PCV/ breathers. Part # 10430 CADILLAC Script Perimeter mount style for 1959-1986 heads. Mid height design clears most roller rockers. Location on intake manifold side can be machined for PCV/ breathers. Part # 11107 Staggered Perimeter Mount LS1/LS6, Center Bolt Mount CHEVROLET Script & Fins Staggered perimeter mount style for 1955 to early 1959 cylinder heads. Mid height design clears most roller rockers. No provision for pcv/breather or oil fill. Part # 11029 CORVETTE Script & Fins Staggered perimeter mount style for 1955 to early 1959 cylinder heads. Mid height design clears most roller rockers. No provision for pcv/breather or oil fill. Part # 11027 Fins Fits 3rd Gen small block heads 1997 and newer. Raised fins & 2 bolt mounting. Breather and PCV holes on intake manifold side. Cast in baffling. Includes 1 set custom gaskets. Part # 10413 Center Bolt Mount Chevy Big Block CHEVROLET Script & Fins Fits 1987-1998 center bolt heads. Raised Chevrolet script lettering and fins. Two bolt mounting. Cast-in baffling with locations on intake manifold side that can be machined for PCV/breathers. Slightly taller than stock to allow roller tip rockers. Part # 11040 CORVETTE Script & Fins Fits 1987-1998 center bolt heads. Raised Corvette script lettering and fins. Two bolt mounting. Cast-in baffling with locations on intake manifold side that can be machined for PCV/breathers. Slightly taller than stock to allow roller tip rockers. Part # 11041 CADILLAC Script & Fins, Tall 3/8 taller than stock to clear most roller rockers. Perimeter mount, with PCV & breather holes. Cast-in baffling. As-cast, powder coated, or polished. Part # 11134 CHEVROLET Script & Fins Stock height, perimeter mount, PCV & breather holes. Cast-in baffling and internal oil drips. As-cast, powder coated, or polished. Part # 9737 CORVETTE Script & Fins Stock height, perimeter mount, PCV & breather holes. Cast-in baffling and internal oil drips. Left side brake booster relief. As-cast, powder coated, or polished. Part # 9096 CORVETTE Script & Fins, Tall 3/8" taller than stock to clear most roller rockers. Perimeter mount, with PCV & breather holes. Cast-in baffling. No brake booster relief. As-cast, powder coated, or polished. Part #11042 CHEVROLET Script & Fins, Tall 3/8" taller than stock to clear most roller rockers. Perimeter mount, with PCV & breather holes. Cast-in baffling. As-cast, powder coated or polished. Part # 9739 General Motors Trademarks are used under license to PML. Inc. Call 800.335.4345 www.yourcovers.com
SAND CAST ALUMINUM VALVE COVERS Cadillac 368, 425, 472, & 500 Chevrolet 348, 409 Flat Top Style Heavy duty valve cover. Open interior clears roller rockers & stud girdles. PCV/ breather/oil fill holes optional. Available in as-cast, powder coated or polished. Part # 7872-1 Flat Top Style, Machined CADILLAC Script & Fins Open interior clears roller rockers & stud girdles. PCV/breather/oil fill holes optional. Available in as-cast, powder coated or polished. Part # 7872-5 Chevrolet Script & Fins Valve covers feature raised CHEVROLET script and fins, strong sand-cast aluminum construction, thick walls and gasket flanges that will not bend when bolts are tightened. Part # 10651 Flat Top, Machined CADILLAC Script Open interior clears roller rockers & stud girdles. PCV/breather/oil fill holes optional. Available in as-cast, powder coated or polished. Part # 7872-2 Cadillac 331, 365, 390 & 429 CADILLAC Script & Fins Thick gasket flange. Taller than stock. Fits many 1949-1967 Cadillac engines. Part #11073 Flat Top Style, Raised CADILLAC Script Open interior clears roller rockers & stud girdles. PCV/breather/oil fill holes optional. Available in as-cast or powder coated. Part # 7872-8 Jeep 258 4.2L Patterned Fins Strong thick-wall construction. Machined for PCV, breather and oil fill. Available in as-cast and powder coated finishes. Part # 8656. Plain Top Strong sand-cast aluminum construction, thick walls and gasket flanges that will not bend when bolts are tightened. Part #11137 SAND CAST ALUMINUM COVERS FOR THE BUICK NAILHEAD V8 General Motors Trademarks are used under license to PML. Inc. Smooth Side Valve Covers For 1953 to 1966 Buick 264, 322, 364, 401, 425 engines. Part # 11080-1 Full Fin Valve Covers For 1953 to 1966 Buick 264, 322, 364, 401, 425 engines. Part # 11080-3 Fins & Vintage Script Valve Covers For 1953 to 1966 Buick 264, 322, 364, 401, 425 engines. Part # 11080-2 Spark Plug Wire Covers Part # 11082 Oil Pan Rear Sump, Heavy Duty, Finned. Part # 11105 Valley Plate Base Model, Part # 11081-1 Valley Plate Include down tube, oil cap, PCV hole, and Grommets. Part # 11081-2 Valley Plate Machined for Dual 4BBL Intake. Part # 11081-3 Valley Plate Machined for Dual 4BBL intake with down tube, cap, PCV hole and grommet. Part # 11081-4 www.yourcovers.com Call 800.335.4345
ACCESSORIES H1 Hummer Switch Covers Replacement bezels for door window switches, with 1 and 2 button openings, in tumbled aluminum and black. Part # 9445-1, 9445-2, 9445-4 Valve Cover Accessories: Oil Caps (polished or brushed aluminum) Push-In Breathers and Grommets Plus Machining for oil fill, PCV, and breathers Gaskets for PML Valve Covers Cork composite for a secure seal.