S3 ELECTRIC CHAIN HOISTS

www.morriscranes.co.uk S3 ELECTRIC CHIN HOISTS EXPERIENCE THE DIFFERENCE

S3 HIGH PERFORMNCE ELECTRIC CHIN HOISTS Experience Complete Innovation For over a century the Morris name has been synonymous with engineering innovation and UK manufacturing excellence in lifting equipment. The superb series of S3 electric chain hoists is a further example of our proven pedigree. Offering lifting capacities from 5kg to 50 tonnes, this outstanding range incorporates: High Performance Hoists High Capacity Hoists Mini Hoists Ultra Low Headroom Hoists Quite simply there is an S3 hoist to meet practically all chain hoist lifting applications no matter how tough the demands on it. Compact and highly versatile with proven and long lasting performance in the most demanding environments, our range of S3 hoists includes some of the most advanced electric chain hoists currently available. The S3 High Performance Range The S3 High Performance range offers lifting capacities from 5kg to tonnes. Rugged, reliable and simple to maintain, the S3 High Performance hoists are packed with features to ensure they give years of outstanding service. ll the features you expect from Morris, as standard The combination of features and design standards make the S3 of the safest hoists currently available. 0 ST/hr. With an M life (FEM M) the 3 phase hoist delivers 50% ED. Upper and lower limit switches. Sealed for protection from dust and water to IP55. Motor insulation class F. Mains contactor fitted for increased safety. preset failsafe brake secures the load in the event of a power supply failure (no adjustment necessary). Complete electrical protection by low voltage control circuit at volts. Slipping clutch factory adjusted and set for life. Smooth operating, precisionmachined case hardened alloy steel loadchain wheel. ll units factory tested to 5% safe working load. Easy maintenance. year warranty To suit 00v 3ph 50hz Power Supply. Single Phase units available to suit 0v and v ph 50hz power supply. Dual travel speeds of 0/5m/min Smooth acceleration and deceleration provided by inverter driven travel drive Low Headroom Fan Cooled Motor/ Thermal Protection Upper and Lower Limits The S3 is capable of working to M (FEM 3m) when required. ll the appropriate ISO, BS and FEM requirements are met or exceeded. Thermal protection and fan cooled motors are fitted as standard across the range. Delivering 50% ED this specification ensures cool running during arduous use. Limit switches are fitted as standard, increasing clutch, motor & gearbox life, protecting the hoist and user.

Options: Increased enclosure protection Hardened (xenoy) contactor covers Steel fan covers Hoist mounted parallel to runway beam, (90 o rotation) dvanced condition monitoring lternative power supplies (3 phase and single phase) lternative dual and variable travel speeds via inverter control Inverter Travel dvanced Condition Monitoring (Optional) Single Phase Supply Dual travel speeds of 0/5m/min are supplied as standard. lternative dual and variable speeds are available through inverter control. Beam widths from mm to mm can be accomodated as standard. Larger beam widths available on request. utomatically records both hours of use and number of lifts. Provides information for you to monitor use, plan servicing and predict life expectancy of the unit. Single phase models are available in 0v and v with M3 (FEM Bm) duty. The 0v model for construction sites has a metal fan cover and a toughened contactor cover to stand up to the toughest tasks. S3 ELECTRIC CHIN HOISTS 3

S3 HIGH PERFORMNCE SPECIFICTIONS Technical Data: 00v 3ph 50hz lternative s No. of Falls Hoist Speeds Hoist Motor Current Weights kg (3m Lift) Capacity kg M (ISO) M (FEM9) 5 5 0 0 50 50 000 000 000 000 50 50 000 000 Model 5 5 5 5 3 3 50 50 3 3 50 50 3 3 0 0 3 3 0 0 M5 m 5 5 5 5 00 00 50 50 00 00 50 50 00 00 00 00 00 00 000 000 00 00 Fast m/min Starting () 5.0 7./. 5.0 7./. 5.0 7./. 5.0 7./. 5.0 7./. 0. 0.7/3.3 0. 0.7/3.3 0. 0.7/3.3 0. 0.7/3.3..3/5.9..3/5.9..3/5.9..3/5.9 Hook Susp. 3 3 33 33 3 3 5 5 5 9 5 9 M 3m 5 5 00 00 0 0 00 00 00 00 00 00 00 00 00 00 50 50 Slow m/min 3.5 3.5 3.5 Hoist Motor Power kw 0. 0./0. 0. 0./0. 0. 0./0. 0. 0./0. 0. 0./0. 0. 0./0. 0. 0./0. 0. 0./0. 0. 0./0.../0.../0.../0.../0. Running ()../0.../0.../0.../0.../0..3.9/.5.3.9/.5.3.9/.5.3.9/.5../.5../.5../.5../.5 Push Travel 9 9 9 3 3 5 7 55 7 55 7 55 70 70 77 77 Geared Travel 3 3 3 3 39 3 39 5 9 57 9 57 9 57 7 7 7 9 7 9 Electric Travel 3 3 3 5 5 55 3 55 3 5 5 9 9 9 03 9 03 Hook/Eye Suspension Push Travel B J H D C H B WC H FW J Capacity kg 0 000 Beam Width minmax mm Model 0 0 Min. Radius m Speed m/min DS 0/5 0/5 Current Running DS().. DS 0.5 0.3 Power kw Data Please advise beam width with order lternative and variable travel speeds available through inverter control WD

I H Dimensions (mm) SWL No. of Falls 5kg 50kg kg two kg t two t t two SWL No.of Falls 5kg 50kg kg two kg t two t t two B Eye Hook Push/Geared ETT Push/Geared ETT with buffers 95 5 350 95 5 350 3 3 3 35 35 00 75 75 9 00 0 55 35 0 0 5 55 550 59 0 F G G H I Max Hook admittance Top hook Load hook 95 09 7 7 0 5 95 09 7 7 0 5 95 09 7 7 7 5 09 7 3 7 5 09 7 3 3 5 35 09 7 0 3 5 35 7 0 0 33 B size box size box size 3 box size box size 5 box 9 9 9 3 30 3 30 355 30 395 355 30 395 J Eye Top hook Push Geared ETT box 5 5 box 5 5 box 5 5 5 box 97 9 50 0 box 97 9 50 50 box3 555 box3 555 C D E E ss hoist ds hoist 5 0 97 5 0 97 5 0 97 5 35 95 97 5 35 95 97 35 95 97 35 95 3 3 H WC WD Push Geared ETT Push Geared ETT 70 05 50 5 70 05 50 5 33 70 05 50 5 90 05 5 5 7 90 05 5 5 53 5 57 90 90 0 5 57 90 90 0 Single Phase Data 0v and v ph 50hz Capacity Kg M3 BM Volts Model No. of Falls Lifting Speed m/max ED % Hoist Motor Power kw Hoist Motor Current Starting () Running () Fuse () Max Supply Cable Length 3C x.5mm 3C x.5mm 3C x mm 50 50 000 000 000 000 000 0 0 0 0 5 5 5 5 50 50 0 0 0 0 5 5 5 5 5 5 5 5 5 5 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 39 39 3 3 0 3 0 3 7.9 3. 7.9 3. 7.3 7.3 0 0 0 0 0 0 3 0 3 0 7 7 5 5 7 7 0 7 0 7 33 33 Geared Travel Electric Travel B WC F max B WC E E 5 WD G WD G J H Note! Nominal increases in dimensions for single phase 35/350 units +0mm B +70mm H +0mm. Option: ll units may be turned through 90 degrees, in line with track. Specifications subject to change without notice. C D H C Note! For electric trolleys with long (ie Heavy) chain lengths antitip stop roller may be required. Extended size 5 steel box option available. This box may require a special suspension. S3 ELECTRIC CHIN HOISTS 5

S3 HIGH CPCITY ELECTRIC CHIN HOISTS Heavy Weight Performance Compact and versatile, Morris S3 High Capacity electric chain hoists are designed to meet the demands of many heavy duty industrial lifting and handling applications. vailable in a range of capacities from 000kg to 0kg, the S3 High Capacity is a rugged workhorse providing the power and reliability to ensure a long and effective working life. Many of the advanced features that are included as standard on S3 High Performance models are also available, as options, on S3 High Capacity Hoists. Outstanding Versatility S3 High Capacity Hoists are available in single and dual falls. Used in conjuction with a variety of suspension options including single and dual speed trolleys, they offer a versatile solution to many lifting applications. Features and benefits Lifting range from 000kg to 0kg. Offered as hook suspension or with a range of push, geared or single and dual speed electric trolleys. Thermal overload device fitted as standard. Volt low voltage control as standard. Sealed from dust and water to IP5, insulation class F. Quiet and smooth hoist operation is ensured by the oil lubricated planetary gearbox. The heavyduty squirrel cage motor features an adjustable spring pressure brake, guaranteeing reliable load retention even in the event of a power failure. Internal slipping clutch prevents overload damage and protects against over hoisting and over lowering. Case hardened, zinc plated load chain gives an extended life and increased corrosion resistance, chain fall up to 00kg, falls from 0kg to 0kg. Heat treated suspension and load hooks are fracture resistant. Designed for easy maintenance and service. Easy access to slipping clutch for adjustment, servicing and part replacement. Suspensions Fracture Resistant Hooks 5 Pocket Load Wheel Choice of hook suspension, push, geared or electric travel trolley. Fracture resistant hooks used in single and two fall bottom blocks and hook suspension units. Precision machined from case hardened high tensile steel for smooth operation.

Options: Protection to IP55 available. Hoist mounted parallel to runway beam (90 o rotation). Other voltages on request. Upper and lower limit switches. Motor with stainless steel brake. Flexible Chain Container djustable Slipping Clutch Pneumatic S3 Long life chain containers made from durable strain resistant fabric. Integral slipping clutch is easily accessible and adjusted. The S3 High Capacity is avaliable as a Pneumatic hoist in various capacities to 5 tonnes. S3 ELECTRIC CHIN HOISTS 7

Capacity kg 000 000 00 00 0 0 000 000 0 0 Model 0 0 350 350 30 30 3 3 0 0 3 3 FEM (IS0) Bm(M3) Bm(M3) m(m) m(m) Bm(M3) Bm(M3) m(m) m(m) Bm(M3) Bm(M3) m(m) m(m) Falls Fast m/min 5 5 5 5.5.5 Slow m/min.5.5 0. Power kw../0.7.3.3/0.5../0.7.3.3/0.5../0.7.3.3/0.5 Starting () /7. 5 /5.9 /7. 5 /7. /7. 5 /5.9 Running ()../.0 5.3 5.5/3.3../.0 5.3./.0../.0 5.3 5.5/3.3 ED% 5 5/5 0 0/0 5 5/5 0 0/0 5 5/5 0 0/0 Hook Suspension 93 93 93 07 07 07 Push 50 55 50 55 50 55 9 7 9 7 9 7 Geared 5 59 5 59 5 59 73 7 73 7 73 7 Electric 9 9 9 3 3 3 Top Hook Suspension S3 HIGH CPCITY SPECIFICTIONS Technical Data: 00v 3ph 50hz Hoist Speeds Push Travel Hoist Motor Current Weights kg (3m lift) H G J C B I H J J L F

Dimensions (mm) Capacity Falls Model Hook Travel B C D E F G H STD Hook Hoist ETT Max Chain Bag Throat SS DS Hook Grd. SS Flange Top Built in Top I Width Load Push & SS J J J J3 K L Beam to Highest Overall Width Point Wheel kg Unit Unit Only DS Thickness Hook Hook Hook Geared DS Push Grd ETT Centres 000 0 5 5 3 7 7 0 7 0 09 55 559 3 3 3 3 3 50 7 09 350 5 5 3 7 7 0 7 0 09 55 559 3 3 3 3 3 50 7 09 00 30 5 5 3 7 7 0 7 0 09 55 559 3 3 3 3 3 50 7 09 0 3 5 3 7 7 0 7 3 7 55 559 3 53 7 3 50 7 09 000 0 5 3 7 7 0 7 3 7 55 559 3 53 7 3 50 7 09 0 3 5 3 7 7 0 7 3 7 55 559 3 53 7 3 50 7 09 Data Capacity kg Model Range Beam Width min/max Min Radius m Speeds Fast Slow m/min m/min SS Power kw DS Motor Current SS Motor DS Motor Starting Running Starting Running () () () () 0000 ll 90.. 0. 0.3/0.09.../. 0.7/0. 0000 ll B 00.. 0. 0.3/0.09.../. 0.7/0. Hand Geared Travel Electric Travel I L D I L E K K F H J J J J J3 Specifications subject to change without notice. S3 ELECTRIC CHIN HOISTS 9

S3 ULTR LOW HEDROOM HOIST Hoist with Ultra Low Integral This range of High Capacity S3 hoists is designed for applications where headroom is at a premium. The Ultra Low headroom range starts with a tonne lifting capacity with a remarkably small 55mm headroom. Lifting capacities range from to 50 tonnes. Features Ultra low headroom. Mechanical overload protection by slipping clutch up to 0kg. Mechanical overload protection by current cutoff from 000kg up. Upper Limit switch. Pendant control switch with emergency stop. Hightensile zinc plated round steel link chain. Low voltage control included as standard. Chain container included as standard. ll electric trolleys are fitted with rubber buffers. Dimensional Data sheet available on request Capacity Falls Flange Width from to R R R3 s FEM Hoist Speed ED% Headroom Power Hoist Motor Current Weights kg (3m Lift) Starting Running Geared Electric Kg No. mm mm mm m/min mm kw () () 000 750 50 Bm.5/. /0 55 0.9/0. 5./.0./. 000 5 570 m.0/.0 /0 5.5/0..5/.5./. 95 05 03 m 5.5/.3 0/5 3./0.7 3./7..7/3. 5 55 0 03 Bm.0/. 0/0 3./0. 3./7..7/3. 5 55 000 95 m./0.7 0/5 5./0.7 3./7..7/3. 395 0 95 m./0.7 0/5 5./0.7 3./7..7/3. 395 0 95 Bm.0/0.5 0/0 5./0. 3./7..7/3. 395 000 55 m.0/0.7 0/0 5.0/.0 3./7..7/3. 00 00 0000 55 m./0.7 0/0 30 5.5/. 3./7..7/3. 05 05 000 55 Bm./0.7 / 30.0/.5 3./7..7/3. 05 05 000 5 m./0.3 0/0 07 5.5/. 3./7..7/3. 50 70 0000 5 Bm./0.3 / 7 5.5/. 3./7..7/3. 50 70 0 5 Bm.0/0. 0/0 50 5.5/. 3./7..7/3. 50 70 000 5 Cm.0/0. / 50 5.5/. 3./7..7/3. 50 70 0000 x 000 Bm./0.3 0/0 x5.5/. x3./7. x.7/3. 50 00 x5 000 Bm./0.3 0/0 70 x5.5/. x3./7. x.7/3. 00 0

S3 MINI HOIST Experience Complete Innovation The S3 minihoist lifts loads up to 5kg yet weighs only kgs. With an M (FEM M) high duty rating, the lightweight minihoist is easy to install and maintain, making it ideal for light crane systems. The minihoist offers the highest levels of build quality and reliabilty. Our two year warranty, repair and full aftersales service will allow you to use this excellent product with confidence. Features and benefits M (FEM M) Duty, 0% ED, 0 motorstarts per hour. Easy installation and maintenance. Overload protection device as standard. 0pocket load wheel for smooth chain operation, constant chain speed and reduced chain wear. Optional impactresistant chain container Gear train lifetime lubricated with non oxidising grease. Thermally protected hoist motor. Rugged cast aluminium alloy body. 5: factor of safety. Small, compact design. Hardened forged steel lower hooks with safety latch rotates 30 o Two year warranty. IP5 Protection. kg in weight. Drawn up dimension, 7mm vailable for 00v 3ph 50hz, 0v & v ph 50hz supplies. Voltage (V) Hoist Speed m/min Power kw Hoist Motor Current Starting Running () () ED% 5 H 05 00v3ph 0.5 0.5 0% 00v3ph 0 0.5. 0. 0% vph 0vph 0. 0.0. 0.. 3. 0% 0% 03 59 J Chain Box Max Height of Lift (metres) Single fall Weight kg at 3m Track Height Capacity No. of Falls Dimensions 5kg 93 53 Size Size Size 3 Size Size 5 3.05... 3. 0.5 0.3 0.3 0.3 B C D 7 7 75 99 35 Dimensons (mm) Specifications subject to change without notice. S3 ELECTRIC CHIN HOISTS

HOISTS CRNES PRTS MODERNISTION TRINING SERVICE UNITED KINGDOM Morris Material Handling Limited PO Box 7 North Road Loughborough Leicestershire LE RL T: +(0)509 0 F: +(0)509 0 SUDI RBI Eastern Morris Crane Company PO Box 93 Dammam 3 Kingdom of Saudi rabia T: +93 733 ext 0 F: +93 737 SINGPORE Morris Material Handling Pte. Ltd 9 Tech Park Crescent Tuas Tech Park Singapore T: +5 3 F: + 5 3 7 THILND Morris (Thailand) Co. Ltd 3/3 Soi Wat Pai Ngern Thungwatdon Sathorn Bangkok 00 Thailand T: + 939 F: + 33 December 00