SONOI VVS direct operated, basic flow balanced poppet /4 U / Series 7 TURS The valves are certified according to I 6508 unctional Safety data and have SI- capability (xida approval) The solenoid valves are recommended for pilot applications with basic flow, wide pressure ranges and no minimum operating pressure PT rider rings and graphite-filled PT seals reduce friction and eliminate sticking oils used in metal enclosures have class insulation materials edicated execution for low edicated execution for extreme low ambient temperatures Peak voltage suppression diodes are standard in solenoids with metal enclosures The solenoid valves satisfy all relevant irectives anual Operators are optional including an under pressure removable type NR ifferential pressure aximum viscosity Response times 0-0 bar [ bar = 00kPa] 65cST (mm /s) 75-00 ms fluids () ( ) temperature range (TS) seal materials ( ) air, inert gas, water, oil -0 to +0-40 to +40-50 to +60 P (fluoroelastomer) VQ (sillicone) ()VQ ((fluoro)sillicone) () ir / inert gas only for x i version (NIS and WSNIS) TRIS IN ONTT WIT UI ( ) nsure that the compatibility of the fluids in contact with the materials is verified rass body Stainless steel body ody rass ISI 6 SS Stem Stainless steel Stainless steel ore tube Stainless steel Stainless steel ore and plugnut Stainless steel Stainless steel Springs Stainless steel Stainless steel Sealings & poppets P, VQ or ()VQ P, VQ or ()VQ Rider ring PT PT RP P P P 0,5W -,8W,6W -,7W 5,7W - 5,8W 0,0W-,W ow Reduced edium asic SPIITIONS pipe size orifice size flow coefficient v operating pressure differential (bar) max. (PS) min. level prefix optional solenoids POWR VS - cold electrical holding values (watt) basic catalogue number N TX / Ix air/water ( ) 7&9 x d x i x e mb x mb IP65 (mm) (m /h) (l/m) ~/= ~/= N NIS PV S brass stainless steel U - Universal, P sealings and poppets /4 5,7 0,45 7,5 0 0 P - 700 700 /4 5,7 0,45 7,5 0 0 P - - - 70 70 /4 5,7 0,45 7,5 0 0 RP - - - 70 70 /4 5,7 0,45 7,5 0 0 P - - - - - 70 70 U - Universal, VQ sealings and poppets /4 5,7 0,45 7,5 0 0 P - 70 70 U - Universal, ()VQ sealings and poppets /4 5,7 0,45 7,5 0 0 P - - - 7 7 /4 5,7 0,45 7,5 0 0 RP - - - 7 7 /4 5,7 0,45 7,5 0 0 () P - - - - 7 7 Select 8 for NPT NSI.0. or Select for ISO (8/) () ir / inert gas only for x i version (NIS and WSNIS) vailable feature vailable feature in only - Not available ll leaflets are available on: www.asconumatics.eu PI--50-8000-0/R0
SRIS 7 PRIX T prefix description level 4 5 6 7 P RP P P xplosionproof - N 7, 9 - Zinc plated steel conduit - - - V xplosionproof - N 7, 9-6 SS conduit - - - Waterproof IP67 - etal enclosure (N/I 60079-7+8, 64-)* T Threaded conduit/hole (0 x,5) - N lameproof - luminium (N/I 60079-, 60079-)* P V ncapsulated epoxy moulded (N/I 60079-8, 64-8)* - - - S Solenoid with spade plug connector (N/I 6070) - W P Waterproof IP67 - etal enclosure - N I S I.S. with luminium IP66/IP67 enclosure (N/I 60079-+)* - - - W S Waterproof IP67-6 SS enclosure - W S Waterproof IP67-6 SS enclosure (N/I 60079-7+8, 64-)* - W S N I S I.S. with 6 SS IP66/IP67 enclosure (N/I 60079-+)* - - - W S N lameproof - 6 SS (N/I 60079-, 60079-)* T Threaded conduit (/" NPT) lass - attery charging circuit - - - X Other special constructions - SUIX T suffix description level 4 5 P RP P P P (ethylene-propylene) - - - - R (chloroprene) - - - - N Oxygen service (R (chloroprene)) - - - - N V P (fluoroelastomer) and parts cleaned for oxygen service V P (fluoroelastomer) - - - O poxy coating on all external surfaces ounting bracket - - - - O Push type manual operator () S Screw type manual operator () () etering device - - - - vailable feature vailable feature in only - Not available * TX solenoids are also approved according to N 46- (non electrical valves) () unctional Safety certification is not applicable with this feature () Under pressure removable execution (see page 6) PROUT STION UI STP Select basic catalogue number, including pipe thread indentification letter. Refer to the specifications table on page. xample: 8700 STP Select prefix (combination). Refer to the specifications table on page and the prefix table on page, respect the indicated level. xample: N STP Select suffix (combination) if required. Refer to the suffix table on page, respect the indicated level. xample: S STP 4 Select voltage. Refer to standard voltages on page. xample: 0V / 50/60z STP 5 inal catalogue / ordering number. xample: N 8700 S 0V / 50/60 z OPTIONS & SSORIS ll leaflets are available on: www.asconumatics.eu -50- catalogue number spare part kit no. () mounting bracket ~ / = S 700 670 S 700 670 S 70 7 S 70 7 S 70 5 S 70 5 S 7 5 S 7 5 S 70 5 S 70 5 S 7 5 S 7 5 S 70 44 S 70 44 S 7 44 S 7 44 Select 8 for NPT NSI.0. or select for ISO (8/) () Standard prefixes/suffixes are also applicable to kits ounting holes in body ORRIN XPS VVS: prefix () pipe thread basic number () S 8 700 4V / WST 700 S 4V / NT 700 0V / 50/60 z WS 700 S 4V / N 8 7 4V / WS 700 S 4V / 8 70 0V / 50/60 z PV 8 70 S 4V / 700 S 40V / 50/60 z ORRIN XPS ITS: prefix basic number 7 (4) WS 670 S N 7 WS 670 O suffix () Prefix and V should always be used in conjunction with change letter in the basic number (4) asic kit number applies to S coil construction voltage suffix 8000-0/R0
XPNTION O TPRTUR RNS O SONOI VVS Valve temperature range Operator ambient temperature range Total temperature range SRIS 7 The valve temperature range (TS) is determined by the selected seal material, the temperature range for proper operation of the valve and sometimes by the fluid (e.g. steam) The operator ambient temperature range is determined by the selected level and the safety code The temperature range of the complete solenoid valve is determined by the limitations of both temperature ranges above TRI RTRISTIS oil insulation class lectrical safety I 5 Standard voltages (=) 4V - 48V; llowable voltage variation ± 0% (~) 4V - 48V - 5V - 0V/50/60z; Other voltages are available on request prefix option asic (P) ratings operator ambient electrical replacement coil / kit inrush holding hot/cold temperature enclosure safety code ~ ~ = range protection ~ = (V) (V) (W) (W) ( ) () (N 6059) 0V/50/60 z 4V/ S 0,0 0,0 0,0 9,0/, -40 to +55 N 6070 IP65, moulded 664-07 40045-4 0 WP/WS 0,0 0,0 0,0 9,0/, -40 to +55 N 6070 IP67, steel /SS 40095-07 4009-4 0 N/WSN 0,0 0,0 0,0 9,0/, -60 to +40/60 II x d II b T6/T5, II x t III b IP67, alu./ss 40095-07 4009-4 05 /WS 0,0 0,0 0,0 9,0/, -40 to +40 II x e mb II b T, II x tb III b IP67, steel /SS 40095-07 4009-4 0 PV - - - 9,0/, -40 to +55 II x mb II b T4, II x mb III b IP65, moulded - - (4) 06 /V,0,0,0 9,/,6-40 to +5/40 N type 7 and 9 N 4X 7600-058 874-006 07 edium Power (P) S 5,8 5,8 5,8 5,/5,7-40 to +90 N 6070 IP65, moulded 40094-97 4009-44 0 WP/WS 5,8 5,8 5,8 5,/5,7-40 to +90 N 6070 IP67, steel /SS 4009-97 40094-44 04 N/WSN 5,8 5,8 5,8 5,/5,7-60 to +60/75/90 II x d II b T6/T5/T4, II x t III b IP67, alu./ss 4009-97 40094-44 05 /WS 5,8 5,8 5,8 5,/5,7-40 to +40/75/90 II x e mb II b T5/T4/T, II x tb III b IP67, steel /SS 4009-97 40094-44 04 Reduced Power (RP) (5) S,7,7,7,/,6-40 to +55 N 6070 IP65, moulded - (5) 4009-04 0 WP/WS,7,7,7,/,6-40 to +55 N 6070 IP67, steel /SS - (5) 40094-4 04 N/WSN,7,7,7,/,6-60 to +60 II x d II b T6, II x t III b IP67, alu./ss - (5) 40094-4 05 /WS,7,7,7,/,6-40 to +40/55 II x e mb II b T6/T5, II x tb III b IP67, steel /SS - (5) 40094-4 04 ow Power (P) (5) N/WSN,85,85,85,5/,8-60 to +55 II x d II b T6, II x t III b IP67, alu./ss - (5) 40094-54 05 NIS (6) 0,5 0,5 0,5 0,5-40 to +60 II x ia II T6 a, II x tb III b IP66/67, alu./ss - 490-00 05 WSNIS 0,5 0,5 0,5 0,5-40 to +60 II x ia II T6 a, II x tb III b IP66/67, alu./ss - 490-00 05 () NIS and WSNIS only available in 4V/ (4) ultiple coil kits are available under TX/Ix, contact us - Not available TRI ONNTIONS prefix S WP, WS,, WS, NIS, WSNIS N, WSN, NTIS, WSNTIS NT, WSNT, NTIS, WSNTIS connection () Temperature range can be limited by sealings (5) (~) limited to 7V/50/60z or 5V/ type () () Refer to the dimensional drawings on page 4 and 5 (6) Shall be protected against any impact or friction, see the installation conditions given in the I& sheet Spade plug connector with cable gland N750-80 (ISO 4400) for cables with an outer diameter from 6 to 0 mm 0 cable gland for cables with an outer diameter from 7 to mm. With an internal and external facility for an earthing or bonding conductor /" NPT threaded cable entry. nclosures are supplied without cable gland 0 x,5 threaded cable entry. nclosures are supplied without cable gland ll leaflets are available on: www.asconumatics.eu -50-8000-0/R0
SRIS 7 ITION OPTIONS x mb/m (prefix "PV") solenoid can be supplied with various cable lengths ompliance with "U", "S" and other local approvals available on request anual Operators are available as shown on page 6 INSTTION ulti language installation/maintenance instructions are included with each valve The solenoid valves can be mounted in any position without affecting operation The mounting holes are provided in the valve body Threaded pipe connection identifier is 8 = NPT (NSI.0.); = (ISO 8/) eclarations of conformity are available on request x e mb Prefix "" and x ia Prefix "NIS" execution: solenoid enclosure has a cable gland with integral strain relief for cables with an o.d. from 7 to mm and is provided with an internal and external connection facility for an earthing or bonding conductor x d Prefix "N/WSN" enclosure is provided with a /" NPT threaded entry hole, 0 x,5 (prefix "T"). is optional. oth are supplied without cable gland ll solenoids with metal enclosure are provided with switch-off peak voltage suppression diodes To comply with I 6508 (SI) the valves must be provided with a specific exhaust protector (as shown on page 6) or equal INSIONS (mm), WIT (kg) TYP 0: TYP 0: poxy moulded poxy moulded S: I 5 / ISO 4400 S: I 5 / ISO 4400 700 / 00 / 0 / 0 70 / 0 / / / 0 / 0 / / 60 7 4 N P 60 7 4 N TYP 0: TYP 04: etal, epoxy coated / ISI 6 SS etal, epoxy coated / ISI 6 SS WP / WS: I 5 WP / WS: I 5 / WS: N/I 60079-7+8, 64- / WS: N/I 60079-7+8, 64-700 / 00 / 0 / 0 70 / 0 / / / 0 / 0 / / 60 7 4 ll leaflets are available on: www.asconumatics.eu 60 7 4 8000-0/R0-50-4
SRIS 7 INSIONS (mm), WIT (kg) TYP 05: TYP 06: luminium, epoxy coated / ISI 6 SS poxy encapsulated N / WSN : N/I 60079-, 60079- NIS / WSNIS : N/I 60079-, 60079- PV: N/I 60079-8, 64-8 7 00 / 00 / 0 / 0 / 0 / 0 / / / 70 / 0 / / / 0 / 0 / / 700 / 00 / 0 / 0 / NPT 9 60 60 5 R 7 4 5 7 4 N TYP 07: poxy encapsulated and V: N type 7, 9 / IS-6 NSI OUNTIN RT 700 / 00 / 0 / 0 60 racket kit no.: 984 contains: Stainless steel 04 SS screws and bracket Ø5,5 7 4 type prefix/option level N P R weight 0 S P 45 0 4 90 4 9 85 50 0 55 9 67-0,95 kg 0 S P/RP 50 0 4 09 95 87 56 5 55 9 6 - -,05 kg 0 WP, WS,, WS P 77 0 4 09 0 8 55 9 6 - - - -,00 kg 04 WP, WS,, WS P/RP 77 0 4 0 8 55 9 65 - - - -,00 kg 05 N, WSN P/P/RP 97 0 4 87 6 0 54 55 9 89 - - 7,60 kg 05 N, WSN, NIS, WSNIS P 97 0 4 97 46 0 54 55 9 99 - - 8,65 kg 06 PV P 45 0 4 76 97 7 67 45 55 9 50 - -,05 kg 07, V P 50 0 4 87 98 77 5 55 9 5 - - - - 0,95 kg ll leaflets are available on: www.asconumatics.eu -50-5 8000-0/R0
SRIS 7 STION RWINS anual Operator (S) anual Operator (O) Removable anual Operator (S) / (O) adapter 9 mm plug XUST PROTTOR ll leaflets are available on: www.asconumatics.eu -50-6 Suffix S Suffix O ounted adapter use TP 670 XUST PROTTOR ORR NO. ¼ ISO 8/ -V004 brass/nickel NPT -PV004 ISO 8/ -VX004 stainless steel NPT -PV004 SS Removable anual Operator S type O type dapter type ROV O / S TOO it number 54 5 540 Tool to remove plug. it no.: 55 PI-0-0050- -- vailability, design and specifications are subject to change without notice. ll rights reserved. 8000-0/R0