GEAR OILS SAMLUBE GEAR MAX RANGE EP 90; EP 80W90 & EP 85W140 (GL4) High performance mild extreme pressure gear lubricant, containing multi-functional additives required for mild extreme pressure conditions. Manual transmission transaxles, planetary hub & other spur gear axles which specifically require mild EP gear oils meeting API GL-4. PERFORMANCE LEVELS MEETS OR EXEEDS: MIL-2105-D (ABSOLUTE) MAN 342 N ZF TE MC 05A, 07A, 12E, 16B, C, D, 17B AND 19B BENEFITS High performance, EP additives system controls transmission gear tooth wear, excellent load carrying capacity to protect gear equipment against surface stress under heavily loaded conditions. GL-4 gear oils have been fortified with anti-wear, anti-oxidant, anti-foam, anticorrosion and extreme pressure additives. SPECIFICATION TYPICAL PHYSICAL CHARACTERISTICS Density @20 C kg/l Viscosity @ 40 C Viscosity Cst @ C Viscosity Index Pour Point C (Max) Flash Point C (min) EP 80W90 EP 90 EP 85W140 0.893 170 16.4 102-33 175 0.9 172 16.7 97-24 222 0.912 430 29 99-27 212 31
GEAR OILS SAMLUBE GEAR EP 90; EP 80W90 & EP 85W140 (GL5) High performance gear and axle oil for automotive axle units subjected to heavy duty conditions. Manual transmission transaxles, planetary hub & other spur gear axles which specifically require EP gear oils meeting API GL-5. PERFORMANCE LEVELS MEETS OR EXEEDS: MIL-2105-D (ABSOLUTE) MAN 342M-2 REOR AXLES DRAIN INTERVAL 160 000KM MAC GO-G ZF TE ML 05A, 07A, 12E, 16B, C, D, 17B AND 19B BENEFITS High performance, EP additives system controls transmission gear tooth wear, excellent load carrying capacity to protect gear equipment against surface stress under heavily loaded conditions. GL-5 gear oils have been fortified with anti-wear, anti-oxidant, anti-foam, anticorrosion and extreme pressure additives. SPECIFICATION TYPICAL PHYSICAL CHARACTERISTICS Density @20 C kg/l Viscosity @ 40 C Viscosity Cst @ C Viscosity Index Pour Point C (Max) Flash Point C (min) EP 80W90 EP 90 EP 85W140 0.9 171 16.2 98-30 220 0.88 16.7 98-24 227 0.912 461 31 99-18 212 32
GEAR OILS SAMLUBE SYNTECH EP SAE 75W90 EP SAE 75W90 GL5 Gear Oil contains extreme pressure additives, which reduce wear in synchromesh transmissions of passenger cars and commercial vehicles operating under moderate service conditions. EP SAE 75W90 GL5 Gear Oil is suitable for spur and helical gear units where high levels of extreme pressure additives are not required. EP SAE 75W90 GL5 Gear Oil may also be used in hypoid axles, under moderate operating conditions. SPECIAL PROPERTIES Improved load carrying abilities Enhanced lubricant performance Manufactured to SABS quality standards Selected additive package, providing - Anti-wear - Anti-oxidation at high temperatures PERFORMANCE LEVELS API Gl5 ZF TE-ML 02/08 MAN 341 (EOD) BMW REAR AXLES TYPICAL PHYSICAL CHARACTERISTIS Kinematic Viscosity @ 40 C @ C Density @ 20 C Viscosity Index Pour point C Flash Point TYPICAL 90 10 0.89 175-27 195 TEST METHOD ASTM D445 ASTM D445 IP190 ASTM D2270 ASTM D97 ASTM D92 33
INDUSTRIAL GEAR OILS SAMLUBE IGO 68,, 150, 220, 320, 460, 680, 0 SAMLUBE EP Industrial Gear Oils are superior performance gear lubes. Premium base oils with an effective sulphur-phosphorous EP additive system minimize wear of enclosed gears and other equipment operating under heavy loads and shock conditions. These premium gear lubes utilize high viscosity index (HVI) base oils to provide high flash points, low volatility and superior oxidation stability. They provide outstanding protection in industrial gear sets operating under severe conditions, such as intermittent shock loads, high peak loads and heavy tooth loads. These premium gear lubes utilize high viscosity index (HVI) base oils to provide high flash point. These quality extreme-pressure gear oils offer: Superior bearing protection Excellent anti-foam protection Excellent rust and corrosion protection Outstanding demulsification characteristics Resistance to oxidative sludge and varnish Protection from galling, scuffing and welding of gear teeth SAMLUBE EP Industrial Gear Oils are ideal for heavy-loaded enclosed gear sets where extremepressure properties and adequate film strength are critical for industrial hypoid gear cases, as well as plain, ball, roller and sleeve type bearings. They may also be used for the lubrication of slides, ways, sprockets, chain drives, winches, hoist and machine tools. 34
INDUSTRIAL GEAR OILS PERFORMANCE LEVELS MEETS OR EXEEDS: US STEEL 224 AGMA 250.04, 251.02 DAWID BROWN S1.53.101 DIN 51517, PART 3 CINCINNATI MACHINE KEY PROPERTIES IGO Viscosity @ 40 C Viscosity Cst @ C Viscosity Index Density @ 20 C Flash Point C (Min) Pour Point C (Max) 68 68 8.7 0.887 191-27 11.4 0.891 191-27 150 150 15 0.897 196-21 220 220 19.4 0.899 199-18 320 320 25 0.903 202-15 460 460 30.8 97 0.904 204-9 680 680 38 92 0.912 204-9 0 0 43.8 84 0.931 205-9 35
GREASES SAMLUBE SUPER WHEEL BEARING GREASE SAMLUBE SUPER WB GREASE is inorganic clay-based greases blended with high viscosity oils selected for its chemical stability and low volatility. They contain anti-oxidants, anti-corrosion and additives. It has excellent physical and chemical stability and gives a long service period at continuous working temperatures of up to 180 C. SAMLUBE SUPER WHEEL BEARING GREASE is designed to operate at temperatures higher than those of conventional soap based greases. They are recommended for use in electric motor and fan bearings, speed and anti-friction bearings, underground mining equipment and other high temperature applications such as plastic injection moulding machines. It is specially designed for high temperature applications such as bearings on cement kiln driers, brick kiln cars. Ingot buggies in steel works and also on slides, guides and plain bearings. BENEFITS Long service life at high temperatures Low leakage rates in service Good pump abillity Resists water washout Reduce wear TYPICAL CHARACTERISTICS Thickening agent NLGI Classification Worked Penetration @ 25 C Drop Point C Oil Viscosity @ 40 C Timken O.K Load kg Min Recommended Temp. Range Colour, Visual Inorganic Bentonite 2 265/295 Non-Melt 90 12 180 Orange / Red 36
GREASES SAMLUBE MP 2 L GREASE High quality Lithium-Base Greases blended from solvent-refined oils and incorporates corrosion and oxidation-inhibitors. They have outstanding chemical stability under severe working conditions and operating temperatures of 10 C to 130 C. Their resistance to oil separation and water is very good making them ideal under moist and corrosive conditions. They are formulated using medium viscosity mineral oil, Lithium 12 Hydroxystearate soap and fortified with additives to enhance oxidation, stability and prevent rust. Ep 2 L Grease is recommended for the lubrication of anti-friction, plain, ball and roller bearings in all types of machinery such as electric motors, generators and mechanisms having ferrous and non-ferrous bearings. Their low starting torque characteristics make it ideal grease for electric motor bearings. BENEFITS One grease for a wide variety of Industrial requirements Resistant to water wash Good dispensing characteristics Long service life Excellent rust protection Greater reliability Wide application range TYPICAL CHARACTERISTICS Thickening agent NLGI Classification Worked Penetration @ 25 C Drop Point C Oil Viscosity @ 40 C Rust Prevention Recommended Temp. Range Colour, Visual Lithium 12 Hydroxytearate 2 265/295 180 90/110 1 120 Dark / Brown 37
GREASES SAMLUBE LITHIUM COMPLEX SUPER SAMLUBE Lithium Complex Super Grease is a multipurpose, lead free lithium complex grease offering excellent high temperature performance properties and long life capabilities. The product also offers good corrosion inhibition, low water wash out characteristics and combined with excellent mechanical stability and load carrying capacity, this makes it the ideal multipurpose grease. It consistently provides superior high temperature performance properties and is suitable for use over a wide operating range of 15 C to 160 C and is suitable for all grease applications but is particularly recommended for grease lubricated bearings at low and high speeds as well as for electric motors and anti-friction bearings. SAMLUBE Lithium Complex Super Grease is designed for use under hostile operating conditions in all types of bearings especially electric motor bearings and similar services. Suitable for use where operating temperatures are continuously between -15 to 160 C and for short term exposure up to 200 C (eg. At 200 C re-lubrication intervals should not exceed 7 days). BENEFITS Good resistance to water wash out Good protection against rust and corrosion Long service life Good load carrying ability TYPICAL CHARACTERISTICS Soap Base NLGI Classification Colour Worked Penetration @ 25 C Drop Point C Oil Viscosity @ 40 C / cst Timken O.K Load kg. Recommended Temp. Range Viscosity Index Molybdenum Disulphide Lithium Complex 2 Brown/Green 265/295 260 120 18-15 to 160 C 107 3 % 38
GREASES SAMLUBE PIN AND BUSH GREASE SAMLUBE Pin and Bush is a heavy duty lithium based grease containing molybdenum disulphide and high grade graphite to enhance anti-wear characteristics. SAMLUBE Pin and Bush have been developed as multi-purpose open gear and bearing grease for heavy duty mining and industrial and agricultural equipment. SAMLUBE Pin and Bush grease deposits a thin film of lubricant which clings tenaciously to resist water wash off, which is ideal for open gear applications. At the same time, its heavy base oil resists squeezing out in plain bearings. Pins & Bushes and Open Gears on: Trucks Shovels Excavators Loaders Rotary Dryers and Kilns Drag lines FEATURES Heavy viscosity base fluid for arduous conditions Retains pump ability in cold conditions Excellent load carrying capacity Transparent film allows gear inspection Extends component life Reduces lubricant consumption Non-bitumastic 39
GREASES DIRECTIONS FOR USE SAMLUBE Pin & Bush may be applied either manually or by automatic greasing systems. TYPICAL CHARACTERISTICS Appearance Lubricating Solids Thickener NLGI Classification Worker Penetration @ 21 C Base Fluid Type Base Oil Viscosity @ 40 C (cst) Drop Point ( C) Copper Corrosion Test Corrosion Resistance Temperature Range (continuous) Black grease Molybdenum Disulphide Lithium 2 265/295 Mineral 120 190 A1 PASS -10 C to 150 C 40