Parts Manual NEWAY BUS & MOTORHOME SUSPENSION

Parts Manual NEWAY BUS & MOTORHOME SUSPENSION 9 9 6 7 0 6A 6 7 0 9 * XL-PS07PM-en-US Rev A

HOLLAND (AND FORMER NEWAY) BUS & MOTORHOME SUSPENSION PARTS REFERENCE GUIDE TABLE OF CONTENTS Truck, Bus & Motorhome Suspensions AD-/6/69 Series............................................................ AD-6//7 Series............................................................ AD-0/60/90 Series............................................................ AD-00-7, -, -9, -............................................................ 0 ADL-0...................................................................... ADZ-...................................................................... 6 ADZ-6...................................................................... ARD-0-6, --6.............................................................. ARD--6, -, ARD--6, -..................................................... 6 ARD--6.................................................................... ARDAB-0-, -0- (same as ARDAB--)......................................... 0 ARDST--6, --6, -6-6, -0-6................................................ ARDSTM/L--6, -6-6......................................................... 6 ARDTB--6A, -6B............................................................. Truck, Bus & Motorhome Non-Powered Suspensions ART-00-B, -, ART--B-, -, -.................................................. 0 ART-00-US-A.................................................................. ART-0-B, -, ART--B-, -, -.................................................. ART-0-C, -, ART--C-, -, -.................................................. 6 ART--B..................................................................... AS Series...................................................................... 0 ASB Series..................................................................... Equalizing Beam Identification (Selected Models)....................................... Part Number Index................................................................ 7 For parts, service, and warranty questions, call.96.60 or visit www.safholland.us XL-PS07PM-en-US Rev A -0 Amendments and errors reserved. SAF-HOLLAND, Inc.

AD-/6/69 Series Parts List IMPORTANT: AD Series Suspension components vary by assembly part number and OEM/Chassis builder specifications. To ensure proper part number identification before placing order, refer to OEM/Chassis builder s specifications or visually check component to be replaced for part number. If part number can not be identified or confirmed please contact SAF-HOLLAND technical service for assistance - -96-60. Bar Pin Style Axle Connection 9 6 0 6 L 7 6 7 E C E Thru Bolt Style Axle Connection B D D AXLE GROUPINGS ITEM # AD-/6/69 PART NO. DESCRIPTION SINGLE QTY. TANDEM QTY. TRIDEM QTY. ** Air Spring with mounting bracket 6 L ** Eq. Beam Assembly - Left Hand - Thru Bolt Design R ** Eq. Beam Assembly - Right Hand - Thru Bolt Design L ** Eq. Beam Assembly - Left Hand - Bar Pin Design R ** Eq. Beam Assembly - Right Hand - Bar Pin Design A 900 0 Rubber Bushing - Front Pivot 6 B 900 0 00 Bushing - Beam Center - Thru Bolt style 6 C 900 0 7 Bushing - Beam Center - Bar Pin style 6 D 900 0 06 Washer for Thru Bolt style connection E 900 0 0 Washer for Bar Pin style connection ** Transverse Beam Assembly A 900 0 Bushing - Transverse Beam 6 900 0 0**** Alignment Bushing (Qty. per adjustable bracket)** 6 ** Frame Bracket - LH adjustable (requires item ) ** Frame Bracket - RH fixed 6 96 00 9 Spacer Washer 6 7 ** Upper Shock Bracket 6 ** Shock Absorber 6 9 9 0 0 Hex Bolt -/ - 7 x 9. 6 0 9 00 06 Hex Nut -/ - 7 6 90 0 69 Hex Bolt / - 0 x 7-/ ( Thru Bolt Design only) 6 96 00 0 Washer - Pivot Spacer 90 6 006 Locking Spacer Assembly 6 96 00 Lock Tab Washer 6 9 00 607 Heavy Hex Nut -/ - 6 6 90 0 6 Cap Screw / - 0 x. 6 7 90 0 9 Cap Screw / - 0 x. 6 9 00 9 Hex Nut / *** *** 6*** 9 00 6 Hex Nut / 6 0 96 00 07 Lock Washer / 6 96 00 6 Washer Flat Narrow 6 9 00 0 Hex Nut Lock - 96 00 6 Washer Flat Narrow (Thru) / 900 0 00 Bushing Adapter (Thru) 90 0 0 Cap Screw - - x 6 Gr. (Bar Pin Only) 6 96 00 7 Washer Flat Narrow. (Hardened) ** Refer to the chassis builder specifications to properly identify the Holland part numbers for the components noted with **. A serial tag may be affixed to the transverse beam that also denotes the Holland kit number that will provide the individual component numbers needed. *** The quantity shown is for a bar pin style unit. If a thru bolt style is used, increase the quantity by two per axle. **** Fabricated frame brackets may use a different alignment bushing. Part number shown is for cast hanger. Provide kit # from serial tag or frame bracket part number from OEM build (VIN) to SAF-HOLLAND service for applicable part number. 6 0 A XL-PS07PM-en-US Rev A -0 Amendments and errors reserved. SAF-HOLLAND, Inc.

AD-6//7 Series Parts List IMPORTANT: AD Series Suspension components vary by assembly part number and OEM/Chassis builder specifications. To ensure proper part number identification before placing order, refer to OEM/Chassis builder s specifications or visually check component to be replaced for part number. If part number can not be identified or confirmed please contact SAF-HOLLAND technical service for assistance - -96-60. 9 L 0 A 7 6 7 7 0 6 Thru Bolt Style Axle Connection F.7 THROAT OPENING F D B D Bar Pin Style Axle Connection E C E AXLE GROUPINGS ITEM # AD-6//7 PART NO. DESCRIPTION SINGLE QTY. TANDEM QTY. TRIDEM QTY. ** Air Spring 6 L ** Eq. Beam Assembly - Left Hand - Thru Bolt Design(shown) R ** Eq. Beam Assembly - Right Hand - Thru Bolt Design L ** Eq. Beam Assembly - LH - Bar Pin Design (side view) R ** Eq. Beam Assembly - Right Hand - Bar Pin Design A 900 0 Bushing - Front Pivot 6 B 900 0 Bushing - Beam Center - Thru Bolt style 6 C 90 0 0 Bushing - Beam Center - Bar Pin style 6 D 900 6 0 Washer for Thru Bolt style connection (see inset diagram) E 96 00 6 Washer for Bar Pin style connection 6 F 900 0 00 Adapter Bushing ** Transverse Beam Assembly A 900 0 Bushing - Transverse Beam 6 900 0 0**** Alignment Bushing (qty. per Adj. bracket)** 6 ** Frame Bracket - LH adjustable (Shown) (Requires Item ) ** Frame Bracket - RH fixed 6 900 6 09 Washer 6 7 ** Upper Shock Bracket 6 ** Shock Absorber 6 9 9 0 0 Cap Screw. - 7 x 9. 6 0 9 00 06 Lock Nut. - 7 6 90 0 69 Cap Screw / - 0 x 7 / ( Thru Bolt Design only) 6 96 00 0 Washer - Pivot Spacer 90 6 006 Locking Spacer Assembly 6 96 00 Tab Washer 6 9 00 607 Heavy Hex Nut / - 6 6 90 0 6 Cap Screw / - 0 x. 6 7 90 0 9 Cap Screw / - 0 x. 6 9 00 9 Lock Nut / *** *** 6 *** 9 00 6 Hex Nut / 6 0 96 00 07 Lock Washer / 6 96 00 6 Washer Flat Narrow 0.7 6 90 0 0 Bolt Hex - x6 Gr 9 00 0 Nut Hex Lock - 90 0 9 Bolt Hex 0. -x Gr 90 00 Air Spring Mounting Plate 6 6 900 Brace 6 7 9 00 7 Nut Hex Lock Thin.7-6 Gr A 6 96 00 7 Washer Flat Narrow. (Hardened) ** Refer to the chassis builder specifications to properly identify the Holland part numbers for the components noted with **. A serial tag maybe affixed to the transverse beam that also denotes the Holland kit number that will provide the individual component numbers needed. *** The quantity shown is for a bar pin style unit. If a thru bolt style is used, increase the quantity by two per axle. **** Fabricated frame brackets may use a different alignment bushing. Part number shown is for cast hanger. Provide kit # from serial tag or frame bracket part number from OEM build (VIN) to SAF-HOLLAND service for applicable part number. 6 0 A D* D* * 6 INTERNAL WIDTH AXLE MOUNTING BRACKETS USE PN 900 6 XL-PS07PM-en-US Rev A -0 Amendments and errors reserved. SAF-HOLLAND, Inc.

AD-/6/69, AD-6//7, AD-0/60/90 Service Repair Kits (SRKs) PIVOT CONNECTION When servicing your AD Series suspension, use the convenient service repair kits noted below. Descriptions are found on the following pages. NOTE: One () SRK Required per axle. AXLE PIVOT CONNECTION (BAR PIN STYLE SHOWN) TRANSVERSE BEAM CONNECTION FRONT PIVOT AXLE THRU BOLT AXLE BAR PIN TRANSVERSE BEAM MODEL CONNECTION CONNECTION CONNECTION CONNECTION AD-/6/69 SRK-6 SRK-0 SRK- SRK- AD-6//7 SRK-6 SRK-7 SRK-0 SRK-7 AD-0/60/90 SRK-6 SRK-9 N/A SRK-00 6 XL-PS07PM-en-US Rev A -0 Amendments and errors reserved. SAF-HOLLAND, Inc.

Service Repair Kits con t. NOTE: New alignment bushings recommended when alignment bushing surface become deformed. Refer to parts list. NOTE: Item is not used on former Ford production units. Pivot Connection Heavy Duty AD-/-6 Series SRK-6: 00 7 (Replaces SRK-00) 9 0 0 Rod Bolt / -7 x 9. 9 00 06 Lock Nut / - 7 900 0 Bushing 96 00 0 Spacer Washer / 96 00 7 Washer Flat Narrow. (Hardened) XL-AK99-0 Torque Specification Decal XL-AK AD Service Repair Kits Literature Pivot Connection Heavy Duty AD-0 Series SRK-6: 00 9 (Replaces SRK-99) 9 0 06 Rod Bolt / -7 x 9.00 9 00 0 Lock Nut / - 7 900 0 6 Bushing 96 00 6 Spacer Washer XL-AK99-0 Torque Specification Decal XL-AK AD Service Repair Kits Literature Transverse Beam Connection AD- Series SRK-: 00 76 90 6 006 Lock Spacer 9 00 607 Heavy Nut / - 900 0 Bushing 96 00 9 Washer Spacer 96 00 Tab Washer Transverse Beam Connection AD-6 Series SRK-7: 00 90 6 006 Lock Spacer 9 00 607 Heavy Nut / - 900 0 Bushing 900 6 09 Washer Spacer 96 00 Tab Washer Transverse Beam Connection AD-0 Series SRK-00: 00 6 90 6 006 Lock Spacer 9 00 607 Heavy Nut / - 900 0 Bushing 96 00 9 Washer Spacer 96 00 Tab Washer XL-PS07PM-en-US Rev A -0 Amendments and errors reserved. SAF-HOLLAND, Inc. 7

Service Repair Kits con t. Transverse Beam Connection AD-0 Series SRK-6: 00 NOTE: See illustration at bottom of page. 900 6 6 Spacer Washer 96 00 Tab Washer Axle Bar Pin Connection AD- Series SRK-: 00 90 0 0 Cap Screw - Bar Pin Only - x 6 Gr. 9 00 0 Hex Nut Lock - 90 0 7 Bushing - Beam Center 96 00 6 Washer Flat Narrow 900 0 0 Spacer Washer Axle Bar Pin Connection AD-6 Series SRK-0: 00 90 0 0 Cap Screw - Bar Pin Only - x 6 Gr. 9 00 0 Nut Hex Lock - 90 0 0 Bushing Beam Center 96 00 6 Washer Flat Narrow NOTE: The AD-0 Series does not utilize the bar pin connection Axle Thru Bolt Connection AD- Series SRK-0: 00 -/ WIDE (6mm) 6 90 0 69 Hex Bolt / - 0 x 7 / 9 00 9 Hex Nut / 900 0 00 Bushing Beam Center 96 00 6 Washer Flat Narrow / 900 0 00 Adapter Bushing 6 900 0 06 Spacer Washer Axle Thru Bolt Connection AD-6 Series SRK-7: 00 6 90 0 69 Hex Bolt / - 0 x 7 / 9 00 9 Hex Nut / 900 0 Bushing Beam Center 96 00 6 Washer Flat Narrow / 900 0 00 Adapter Bushing 6 900 6 0 Spacer Washer Axle Thru Bolt Connection AD-0 Series SRK-9: 00 6 6 WIDE (mm) 90 0 70 Hex Bolt / - 0 x 9 00 9 Hex Nut / 900 0 Bushing Beam Center 96 00 6 Washer Flat Narrow / 900 0 9 Adapter Bushing XL-PS07PM-en-US Rev A -0 Amendments and errors reserved. SAF-HOLLAND, Inc.

ADZ- Exploded View 9 6 9 6 7 0 6 B A 0 6A 6 0 7 FOR " RIDE HEIGHT 7 6B 9 * 7 NOTE: Many of the ADZ components are available in Service Repair Kits found on Pages -0 -. 6 XL-PS07PM-en-US -0 Amendments and errors reserved. SAF-HOLLAND, Inc.

ADZ- Parts List NOTE: Many of the ADZ components are available in Service Repair Kits found on Pages -0 -. * Frame Crossmember Assembly Consult SAF-Holland Backer Plate 900 70 Bar-Pin Bushing 900 0 6 Washer -.6" ID Kenworth Supplied Lock Nut -.6" GRC Kenworth Supplied 6 Hex Bolt -.6"- x " GR Kenworth Supplied 7 V-Rod Assembly 90 900 Washer - "Dia. Tapered 96 00 6 6 9 Thru Bolt Bushing 900 0 6 0* Upper Axle Bracket (V-Rod) ** Consult SAF-Holland Pinion Plate (Replacement Only) 900 7 Washer - " Inside Dia. 96 00 6 0 Lock Nut - " GRC 9 00 0 Hex Bolt - "- x 6" GR 90 0 0 Axle Stop - 0" Ride Height LH Axle Stop - 0" Ride Height RH Axle Stop - " Ride Height LH Axle Stop - " Ride Height RH 900 66 900 6 900 60 900 6 6 Shock Absorber 900 60 7 HCV Link Bracket 900 6 0 * Washer -.7" ID 96 00 6 0 Lock Nut -.7"-0 GR C 9 00 9 0 Hex Bolt -.7"-0 x 6." GR 90 0 669 A* B* Upper Shock Bracket 0" Ride Height Upper Shock Bracket " Ride Height 900 79 900 Hex Bolt -.7"-0 x." GR 90 0 97 Spacer Washer 900 6 7 Hex Bolt -.7"-0 x.7" GR 90 0 67 * Lower Control Arm Assembly Consult SAF-Holland 6A Air Spring - 0" Ride Height 90 7 6 6B Air Spring - " Ride Height 90 7 9 7 Lock Washer -." ID 96 00 07 Lock Nut -.0"- GRC 9 00 9 Bar-Pin Bushing 900 0 67 0 Hex Bolt - " x " GR 90 0 77 Bushing 900 0 66 Washer - " Dia. Tapered 96 00 0 Alignment Puck (Collar) 00000Z Hex Bolt -."-7 x 7." GR 90 06 07 Washer -." ID 96 00 7 6 Lock Nut -."-7 GRC 9 00 06 * 9 0 Lower Axle Adapter Bracket Left & Right Hand** Frame Bracket - Fixed 0" Ride Height Frame Bracket - Fixed " Ride Height Frame Bracket - Adjustable 0" Ride Height Frame Bracket - Adjustable " Ride Height Consult SAF-Holland 900 77 90 7 900 7 90 7 Lock Nut -.7"-6 GRC 9 00 9 Upper Air Spring Bracket " Ride Height 90 9 * It is recommended that you discuss your configuration with a SAF-HOLLAND Product Specialist. ** For Meritor: RT 0 / / - RS - 60 RT 6-60 For Dana: 0T - 70 6-0 DT6 - P D6-70 6-90 HB (6-70) DSP0 DSH0 IMPORTANT: The part numbers listed may not correspond with your vehicle s ADZ installation. Contact your vehicle OEM for your specific part number information. XL-PS07PM-en-US -0 Amendments and errors reserved. SAF-HOLLAND, Inc. 7

ADZ-6 Exploded View NOTE: Many of the ADZ components are available in Service Repair Kits found on Pages -0 -. 9 6 9 6 7 0 6 B A 0 6 7 0 FOR " RIDE HEIGHT 7 B 7 6B 9 * A 6A 7 XL-PS07PM-en-US -0 Amendments and errors reserved. SAF-HOLLAND, Inc.

ADZ-6 Parts List NOTE: Many of the ADZ components are available in Service Repair Kits found on Pages -0 -. * Frame Crossmember Assembly Consult SAF-Holland Backer Plate 900 70 Bar-Pin Bushing 900 0 6 Washer -.6" ID Kenworth Supplied Lock Nut -.6" GRC Kenworth Supplied 6 Hex Bolt -.6"- x " GR Kenworth Supplied 7 V-Rod Assembly 90 900 Washer - "Dia. Tapered 96 00 6 6 9 Thru Bolt Bushing 900 0 6 0* Upper Axle Bracket (V-Rod) ** Consult SAF-Holland Pinion Plate (Replacement Only) 900 7 Washer - " Inside Dia. 96 00 6 0 Lock Nut - " GRC 9 00 0 Hex Bolt - "- x 6" GR 90 0 0 Axle Stop - 0" Ride Height LH Axle Stop - 0" Ride Height RH Axle Stop - " Ride Height LH Axle Stop - " Ride Height RH 900 66 900 6 900 60 900 6 6 Shock Absorber 900 60 7 HCV Link Bracket 900 6 0 * Washer -.7" ID 96 00 6 0 Lock Nut -.7"-0 GR C 9 00 9 0 Hex Bolt -.7"-0 x 6." GR 90 0 669 A* B* Upper Shock Bracket 0" Ride Height Upper Shock Bracket " Ride Height 900 79 900 Hex Bolt -.7"-0 x." GR 90 0 97 Spacer Washer 900 6 7 Hex Bolt -.7"-0 x.7" GR 90 0 67 * Lower Control Arm Assembly Consult SAF-Holland 6A Air Spring - 0" Ride Height 90 7 6 6B Air Spring - " Ride Height 90 7 9 7 Lock Washer -." ID 96 00 07 Lock Nut -.0"- GRC 9 00 9 Bar-Pin Bushing 900 0 67 0 Hex Bolt - " x " GR 90 0 77 Bushing 900 0 66 Washer - " Dia. Tapered 96 00 0 Alignment Puck (Collar) 00000Z Hex Bolt -."-7 x 7." GR 90 06 07 Washer -." ID 96 00 7 6 Lock Nut -."-7 GRC 9 00 06 * 9 0 Lower Axle Adapter Bracket Left & Right Hand** Frame Bracket - Fixed 0" Ride Height Frame Bracket - Fixed " Ride Height Frame Bracket - Adjustable 0" Ride Height Frame Bracket - Adjustable " Ride Height Consult SAF-Holland 900 77 90 7 900 7 90 7 Lock Nut -.7"-6 GRC 9 00 9 A B Upper Air Spring Bracket 0" Ride Height Upper Air Spring Bracket " Ride Height 90 00 90 9 Brace Upper Air Spring Bracket 900 * It is recommended that you discuss your configuration with a SAF-HOLLAND Product Specialist. ** For Meritor: RT 0 / / - RS - 60 RT 6-60 For Dana: 0T - 70 6-0 DT6 - P D6-70 6-90 HB (6-70) DSP0 DSH0 IMPORTANT: The part numbers listed may not correspond with your vehicle s ADZ installation. Contact your vehicle OEM for your specific part number information. XL-PS07PM-en-US -0 Amendments and errors reserved. SAF-HOLLAND, Inc.

ADZ Service Repair Kits (SRKs) Front Pivot Bushing Connection Kit Part Number: 00 09 SRK-6 Bushing 900 0 66 Washer - " Dia. Tapered 96 00 0 Alignment Puck (Collar) 00000Z Hex Bolt -."-7 x " GR 90 06 07 Washer -." ID 96 00 7 6 Lock Nut -."-7 GRC 9 00 06 6 6 Axle Bar-Pin Bushing Connection Kit Part Number: 00 0 SRK-6 9 Bar-Pin Bushing 900 0 67 Washer - "Dia. Tapered 96 00 6 0 Washer - " Inside Dia. 96 00 6 Lock Nut - " GRC 9 00 0 0 Hex Bolt - " x " GR 90 0 77 9 V-Rod Bushing Connection Kit Part Number: 00 SRK-6 Bar-Pin Bushing 900 0 6 Washer -.6" ID Kenworth Supplied Lock Nut -.6" GRC Kenworth Supplied 6 Hex Bolt -.6"- x " GR Kenworth Supplied Washer - "Dia. Tapered 96 00 6 9 Thru Bolt Bushing 900 0 6 Pinion Plate 900 7 Washer - " Inside Dia. 96 00 6 Lock Nut - " GRC 9 00 0 Hex Bolt - "- x 6" GR 90 0 0 6 NOTE: SAF-Holland offers a standard pinion plate system for retrofit/aftermarket replacement. 9 0 XL-PS07PM-en-US -0 Amendments and errors reserved. SAF-HOLLAND, Inc.

ADZ Service Repair Kits (SRKs) Air Spring Kit ADZ--0 Part Number: 00 SRK-66 6A Air Spring 90 7 6 7 Lock Washer -." ID 96 00 07 Lock Nut -.0"- GRC 9 00 6A 9 Air Spring Kit ADZ-- Part Number: 00 0 SRK-66 6B Air Spring 90 7 9 Washer -.7" ID 96 00 6 7 Lock Washer -." ID 96 00 07 6 Lock Nut -.0"- GRC 9 00 6 Lock Nut -.7"-6 GRC 9 00 9 7 6B Air Spring Kit ADZ-6-0 and ADZ-6- Part Number: 00 SRK-66 6C 6C Air Spring 90 7 9 Washer -.7" ID 96 00 6 7 Lock Washer -." ID 96 00 07 6 Lock Nut -.0"- GRC 9 00 6 Lock Nut -.7"-6 GRC 9 00 9 7 XL-PS07PM-en-US -0 Amendments and errors reserved. SAF-HOLLAND, Inc.

ADZ Service Repair Kits (SRKs) Shock Absorber Kit For " Ride Height Part Number: 00 SRK-67 6 Shock Absorber 900 60 Washer -.7" ID 96 00 6 6 Lock Nut -.7"-0 GRC 9 00 9 0 Hex Bolt -.7"-0 x 6." GR 90 0 669 Hex Bolt -.7"-0 x." GRC 90 0 97 0 Shock Absorber Kit For 0" Ride Height Part Number: 00 SRK-6 6 Shock Absorber 900 60 Washer -.7" ID 9 00 6 Lock Nut -.7"-0 GR C 9 00 9 0 Hex Bolt -.7"-0 x 6." GR 90 0 669 Spacer Washer 900 6 7 Hex Bolt -.7"-0 x.7" GR 90 0 67 6 0 XL-PS07PM-en-US -0 Amendments and errors reserved. SAF-HOLLAND, Inc.