Lithium-ion Battery DATA SHEET

Similar documents
Lithium-ion Battery DATA SHEET

Lithium Polymer Battery DATA SHEET

Lithium-ion Battery DATA SHEET

Lithium-ion Battery DATA SHEET

Product Specification

Lithium-ion Battery DATA SHEET

Li-ion Battery Specification

Specification. For. LiFePO 4 Rechargeable Cell. EnnoPro Group Limited. Cell Type : CEBA AH

Specification. Li-ion Rechargeable Battery

Li-ion Rechargeable Button Cell. Specification

The document describes the product specification of the LiFePO4 polymer lithium-ion rechargeable battery cell supplied by Tenergy Corporation.

Specs Approval. Lithium-ion Rechargeable Cell Battery. Model No.: GMB3048 : : Guangzhou Markyn Battery Co., Ltd

EnnoPro Group Limited. Specification. For. Cell Type : CEBA AH. CEBA AH Revised date Approved Checked Designed

Specification Approval Sheet

Li-Polymer Battery Technology Specification

SHENZHEN PKCELL BATTERY CO., LTD. Polymer Li-ion Battery Technology Specification

TECHNOLOGY FILE GB CELL. FILE NAME:Specification for 18650C4 Cylindrical. Lithium Ion Rechargeable Battery PREPARED BY REVIEWED BY APPROVED BY

Specification Approval Sheet

Product Specification

Specification Approval Sheet

Product Specification

Product Specification

Product Specification

L CR MAH

PRODUCT SPECIFICATION. Lithium-ion Battery Model: IFP Ah (LiFePO4) Prepared Checked Approved

Specifications. Model: LiNiCoMn 3.7V 2000mAh. Prepared Checked Approved. AA Portable Power Corp Address:

Polymer Lithium Ion Battery. Specifications. Model: PL D. Approval Checked Draft

Specification Approval Sheet

Technical Specification

Specification Approval Sheet

BE AWARE: ESD Sensitive Components!

EEMB CO., LTD. Specification

Specifications Model:

EEMB CO., LTD. Specification

EEMB CO., LTD. Specification

EEMB CO., LTD. Specification

Lithium Ion Rechargeable Cell

EEMB CO., LTD. Specification

Sanyo Lithium ion Rechargeable Batteries

Specification Approval Sheet

NI-MH LOW-SELF DISCHARGE READY TO USE

Specification. Cylindrical Li-ion battery. Type: Product model battery VER A Product Specification 3.6V 1400mAh Date 2005/1/3

Lithium Polymer Rechargeable Battery Pack Tested and approved to UN38.3

Polymer Lithium-ion Battery Product Specification

PRODUCT SPECIFICATION

Lithium Ion Battery Specifications

SPECIFICATION OF PRODUCT

RS Stock number

Contents. Page 1. Publication Record Safety Instructions Extent of the Application Battery Classification and Type 6

EEMB CO., LTD. Specification

Tenergy Corp 1292 Kifer Road Suite 807 Sunnyvale CA 94086

CHARACTERISTICS FOR. NEXcell NICKEL-METAL HYDRIDE RECHARGEABLE BATTERY PACKS. MODEL HTD x 10

High Temperature Rechargeable Nickel-Metal Hydride Cylindrical Battery Pack, 3 cell, 4000mAh

Soshine International. Li-ion Battery. Specification. Model: 18650USB Prepared Auditing Approved WUSUN L.XUN SILING

EEMB CO., LTD. Lithium Manganese Dioxide Battery Specification. High Power Type. Prepared Checked Approved. Signature Checked Approved

40 V LITHIUM-ION BATTERY ATTACH YOUR RECEIPT HERE AB13786C 1. kobalttools.com ITEM # /

ENGLISH. RS Stock number Description:

COIN CELL CR2477 BRIEF SPECIFICATION

1. Product Specification

2 1.Nominal Voltage 1.2V. 2 6.End Voltage of Discharge 1.0V

APPROVE SHEET. Customer : Lithium ion polymer rechargeable battery. Cell s model name : Assembly: Date : 2008/01/29.

LITHIUM THIONYL CHLORIDE Computer Back-up Type ER14250-CB BRIEF SPECIFICATION

Specification Approval Sheet

Checkup. Make. Signature. Date. Company Stamp: com

ENGLISH. RS Stock No

BUTTON CELL CR2450S BRIEF SPECIFICATION

Specification Approval Sheet

EWT Li-Ion Battery Datasheet

Product Specification

LITHIUM / THIONYL CHLORIDE Energy Type ER10250 BRIEF SPECIFICATION

LITHIUM-ION POLYMER RECHARGEABLE BATTERY

Coin Type Lithium-ion Rechargeable Battery

Specification Approval Sheet

Specification Approval Sheet

RS Stock No

LITHIUM / THIONYL CHLORIDE High Power Type ER18505M BRIEF SPECIFICATION

EEMB CO., LTD. Lithium Manganese Dioxide Battery Specification. Button Type. Prepared Checked Approved. Signature Checked Approved

NOTICE ENGLISH 1. HOW TO USE THE SYSTEM 2. SAFETY RULES ABOUT THE BATTERY DANGER WARNING PRECAUTION 3. FAILSAFE ADJUSTER

Specification Approval Sheet

Specification For 3.7V mAh Issue date 2007/10/20 Page 1/6

Product Specifications

Li-Ion & LiPoly Batteries

High-Power Type (Spiral structure, Laser-sealing) CR34615SL BRIEF SPECIFICATION

SAFETY AND LEGAL. PJ-673 Mobile Printer. Be sure to read this document before using the printer. AP ENG

Specification Approval Sheet. signed by client. signed by manufacturer

Kit Contents 1x Carry case, 1x Instruction manual, 1x Charger, 1x SpotterXtreme

ENGLISH. Datasheet. Polymer Li-ion Rechargeable Battery Pack

User's Manual. MV100 Rechargeable Battery Model. Yokogawa Electric Corporation. IM MV100-41E 1st Edition

Specification Approval Sheet

EEMB CO., LTD. Lithium Thionyl Chloride Battery Specification. High Power Type. Prepared Checked Approved. Signature Checked Approved

Spec. No. INR E Version No. 1.0

Product Specification

TYPE:UP-SC3600mAh (Flat) Specifications. Dimensions. Typical characteristics Standard charge characteristics. Nominal voltage 1.2V.

Specification Approval Sheet

Product Specification Polymer Li-ion 7.4v 2100 mah

Li-ion Button Rechargeable Battery Specification

Specification Approval Sheet

CATALOG. <Japanese> <English>

Lithium Manganese Dioxide Battery (Li/MnO2)

Superior Lithium Polymer Battery

Transcription:

Lithium-ion Battery DATA SHEET Battery Model: LIR1632 Prepared Authorized Approved Zhe Hao, Wei Feng, Li Ji de, Wong Manufacturer: EEMB Co., Ltd. Website: http://eemb.com

This Specification describes the requirements of the lithium ion rechargeable battery supplied by EEMB Co., Ltd. 1.0 BASIC CHARACTERISTICS 1.1 Battery Type LIR1632 1.2 Nominal Voltage 3.6V 1.3 Nominal Capacity 25±2mAh 1.4 Maximum Capacity 27mAh 1.5 Dimension (mm) Diameter 16.0-0.2 Height 3.2 +0.3 1.6 Weight 1.7±0.3g 2.0 Battery Characteristics 2.1 Testing Conditions Temperature: 20±1 Relative Humidity: 75±5%RH Atmosphere pressure:1atm 2.2 Standard Charge/Discharge Characteristics The test should be conducted under the condition below: In a temperature of 20±5, CC charge 0.2CmA / voltage up to 4.20V; Then CV charge. Terminate charging when the charging current value is less than 0.05CmA.Rest for no more than 10 minutes, Discharge CC at 0.2CmA to 2.75V. 2.3 Fast Charge/Discharge Characteristics Temperature 20±5, CC charge at 1CmA to 4.20V; turn to CV charge; Terminate charging when the charging current value is less than 0.05CmA, rest for no more than 10 minutes, then at 1CmA CC discharge to 2.75V. 2.4 Temperature Characteristics Working temperature range: -20 60 2.5 Storage temperature: 20 ±1

3.0 General Features 3.1 Long Cycle Life Under normal usage, the cycle life of the battery can be 300 circles while with capacity 80% LIR1632 Datasheet 3.2 High Power Density High power density makes the battery light in weight and small in dimension. It can be used in small devices. 3.3 Safe and Reliable No floating metal lithium assures a safer usage. 3.4 High working voltage Working voltage is up to 3.6V, approx. 3 times of the voltage of NI-MH or NI-CD, which reduces the quantity of the battery needed in certain application. 3.5 No memory effect No memory effect assures a constant maximum application. 3.6 Low self-discharge rate: 5%/month 3.7 Good Consistency Good consistency is showed in battery capacity, internal resistance, discharge platform and capacity retention. A strict complete internal quality control is subject to the ISO9000 system in the company s production. 4.0 BATTERY DIMENSION

5.0 ELECTRONIC CHARACTERITICS CURVE LIR1632 Datasheet

6.0 WARNINGS AND CAUTIONS IN HANDLING THE Lithium-ion BATTERY To prevent a possibility of the battery from leaking, heating or explosion, please observe the following precautions: WARNINGS! 1) Do not immerse the battery in water or seawater, and keep the battery in a cool dry surrounding if it stands by. 2) Do not use or leave the battery near a heat source as fire or heater 3) When recharging, use the battery charger specifically for that purpose 4) Do not reverse the position (+) and negative (-) terminals 5) Do not connect the battery to an electrical outlet 6) Do not discard the battery in fire or heat it 7) Do not short-circuit the battery by directly connecting the positive (+) and negative (-) terminal with metal objects such as wire. 8) Do not transport or store the battery together with metal objects such as necklaces, hairpins etc. 9) Do not strike or throw the battery 10) Do not directly solder the battery and pierce the battery with a nail or other sharp object. CAUTIONS! 1) Do not use or leave the battery at very high temperature (for example, at strong direct sunlight or in a vehicle in extremely hot weather). Otherwise, it can overheat or fire or its performance will be

degenerate and its service life will be decreased. 2) Do not use it in a location where static electricity is great, otherwise, the safety devices may be damaged, causing hidden trouble of safety. 3) If the battery leaks, and the electrolyte get into the eyes. Do not rub eyes, instead, rinse the eyes with clean running water, and immediately seek medical attention. Otherwise, it may injure eyes or cause a loss of sight. 4) If the battery gives off an odor, generates heat, becomes discolored or deformed, or in any way appear abnormal during use, recharging or storage, immediately remove it from the device or battery charger and stop using it. 5) In case the battery terminals are dirt, clean the terminals with a dry cloth before use. Otherwise power failure or charge failure may occur due to the poor connection with the instrument. 6) Be aware discarded batteries may cause fire, tape the battery terminals to insulate them.! Special Notice Keep the cell in 50% charged state during long period storage. We recommend to charge the battery up to 50% of the total capacity every 3 months after receipt of the battery and maintain the voltage 3.6~4.0V. And store the battery in cool and dry place.