Collingwood Lighting spring.summer 2006

v6 Collingwood Lighting spring.summer 006

IP- rating bathroom zone Free next day delivery on most items if ordered before 3.00pm ( 75 minimum order value) If order is below 75 a 15 handling construction material fee applies lamp type LED type beam angle of LED / lamp S.E.L.V - safety extra low voltage ta - maximum ambient temp tc - max case temp lamp included / not included All specifications are believed to be valid at time of going to press and are subject to change without notice walkover glass max weight max drive-over speed glass temp when lit max angle / max rotation Whilst we try to ensure accurate colour representation, please be aware that the photographic/printing process may sometimes alter colours (especially LEDs) recess fitting / surface mount weight Errors and omissions excepted battery included / not included / rechargable dimmable / dimming Any variations to specifications and full details of conditions of sale can be obtained by contacting us at: type of wiring required cut-out size drill size required tel: +44 (0)1604 495151 fax: +44 (0)1604 495095 email: sales@collingwoodgroup.com length of warranty tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

NEW PRODUCTS FOR 006 NEW WALL LIGHTS ML03 WL040 MC010 / MC00 OCTOLED mini aluminium halo light mini halo LED wall-light mini cube lights rotatable octagonal wall light 17 18 19-0 1- NEW DOWNLIGHTS NEW BOLLARDS DL110 WH DL130 WH RANGE BOL LED 00T1/T BOL LED BRACKET aluminium downlight aluminium downlight range aluminium bollards bracket 33 33-34 41-4 44 POWER SUPPLY COLOUR CHANGE ACCESSORIES EMERGENCY PACK PDC/00/4 DMX C WB TBS LED EP 01 00w power supply colour change contol panel thermal bonding system emergency pack for LED 74 81 130 130 web: www.collingwoodlighting.com email: sales@collingwoodgroup.com

DOWNLIGHTS WALL LIGHTS GROUNDLIGHTS 05 15 31 STRIP LIGHTING LED BOLLARDS SPIKELIGHTS 35 41 45 WIRING LED COMPONENTS FIBRE OPTICS 51 55 65 TORCHES COLOUR CHANGE POWER SUPPLIES 68 75 83 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

FLOODLIGHTS BURIED UPLIGHTERS POINT OF SALE 87 91 95 WALL WASHERS LV DOWNLIGHTS BOLLARDS 97 99 107 TRANSFORMERS LIGHTS/LAMPS BATHROOM 111 119 13 MISC. ACCESSORIES WIRING INFO & FAQ p131-13 CONTACTS p133-134 18 19 web: www.collingwoodlighting.com email: sales@collingwoodgroup.com

1 GL030 dichroic groundlight GL030/LED3 FLOOD or SPOT LED groundlight GROUNDLIGHTS Made using the highest-grade stainless steel (316), The GLO30 is a top quality ground light perfect for driveways, paths, decking and the illumination of buildings, trees and statues. With its rugged construction and 5mm thick toughened safety glass, you can install this unit with confidence that it can take all the wear that even the busiest environments can create. A 35w dichroic lamp comes as standard for a strong light output. GL030/LED3 featuring cool glass, is a 98mm diameter professional groundlight, with a stainless steel (316) face and toughened safety glass for maximum durability, so it s perfect for paths, decks and gardens. Three 1w high power LEDs inside giving 38 Lux at 1m (white LED) make this a striking addition to the GL030 range. The power supply comes pre-wired to LED3 within housing for straight to mains simplicity. GL030 LED/3 F Comes with clear and frosted glass Cable diameter: 8-1mm 98mm 156mm 85mm 190mm photometric data: GL030 35w (clear glass) GL030 35w ( frosted glass) photometric data: GL030 + LED/3 S (clear glass) photometric d GL030 + LED/3 F (clear glass) GL030 + LED/3 S ( frosted glass) GL030 + LED/3 F ( frosted glass 05 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

GL030 without installation tube GL030 with installation tube GROUNDLIGHTS Spring clips allow for easy and sturdy installation into a variety of environments Removable tube housing provides excellent form-work for sand under stone paving and cast in situ concrete environments ** Cut-out without tube ** Cut-out with tube 1 000005/1 0004999/1 web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 06

1 GL016 stainless steel universal LED light GL016 AB antique brass GROUNDLIGHTS This exclusive, robust yet attractive, mid-sized (60mm dia) LED light is ideal for path, lobby and deck lighting. Inexpensive to run and with up to 100,000 hours of LED life, ensures a maintenance free product and makes the GL016 great value for money. With cool glass for added safety. LED available in: GL016 WH BL RED AMB GRE Colour binning information & FAQ: ( see page 131-13) 60mm 39mm 3m Now available in AQUAMARINE Specially for water applications. The new AQM aquamarine colour is perfect for lighting around pools and spa baths. Or installed into ponds and water features. Use with power supplies: PLD 1-16 (dimming), PLU350 1-9, PLR 1-5, PLS 1- (p68) Use JB for series wiring (p65) photometric data: GL016 ** IP68 at 1bar ( 9m water ) ** If used in bathroom ZONE 0 or 1, it must be used in conjunction with suitable power supply ( see page 68) 07 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

1 000495/1 000495/1 3 000133/1 GROUNDLIGHTS 3 GL01 0w dichroic groundlight Cable diameter: 4-6.5mm 64mm 93mm This exclusive, robust yet attractive, mid-sized (64mm dia) dichroic light is ideal for path, lobby and deck lighting where a higher light outout is needed. photometric data: GL01 web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 08

1 GL018 stainless steel small recessed LED light GL018 AB antique brass GROUNDLIGHTS This mini (36mm dia) path marker/groundlight is ideal for both domestic and public applications. A modern waterproof design make this unit a must for decking areas, lobby s and walkways. Combined with exceptionally low power consumption means this product is cost effective not only to buy but also to run. LED available in: GL018 WH BL RED AMB GRE Colour binning information & FAQ: ( see page 131-13) 3m HO5-RN-F cable attached 36mm 37mm 3m Use with power supplies: PDC/10/4 : 1-0 units PDC/0/4 (dimming): 1-40 units ** IP68 at 1bar ( m water ) ** If used in bathroom ZONE 0 or 1, it must be used in conjunction with suitable power supply ( see page 73) 09 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

1 0001695/1 0001695/1 3 0001940/1 GROUNDLIGHTS 3 GL018 T panel mount LED spotlight GL018 but with thread and nut Perfect for Spa baths For further information see bathroom section (p118) 36mm 37mm 3m With its thread and nut, the GL018 T is designed for mounting in panels, spa baths, pools, water features and ponds. (see page 118 for further details) Use with power supplies: PDC/10/4 : 1-0 units PDC/0/4 (dimming): 1-40 units web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 10

1 GL019 SPOT small recessed LED light GL019 FLOOD flood version GROUNDLIGHTS Discreet yet powerful, this Luxeon LED powered ground light is perfect for dance floors, decking areas, entrance halls and pathways. Indoors or out, the IP68 marine grade stainless steel unit will give a flawless performance for many years of maintenance free operation. Available with a flood or a spot beam angle, means the GL019 is suitable for any application. With cool glass for added safety. GL019 SPOT FLOOD LED available in: WH BL RED AMB GRE 1m 0.35mm red and black Teflon cable 40mm 36mm 1m Colour binning information & FAQ: ( see page 131-13) Use with power supplies: PLD 1-16 (dimming), PLU350 1-9, PLR 1-5, PLS 1- (p68) Use JB for series wiring (p65) photometric data: GL019 SPOT photometric d GL019 FLOOD ** IP68 at 1bar ( m water ) ** If used in bathroom ZONE 0 or 1, it must be used in conjunction with suitable power supply ( see page 73) 11 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

1 000360/1 000360/1 3 0015445/1 4 000605/1 GROUNDLIGHTS 3 GL019 F KIT x5 GL019 lighting kit 4 GL019 T panel mount LED spotlight All you need for a great LED installation in one box. 5 x GL019 FLOOD (your choice of colour), PLU350 1-9 power supply, 0 x UY waterproof connectors and 100m of CR135 cable With its thread and nut, the GL019 T is designed for mounting in panels, spa baths, pools, water features and ponds. (p118 for further details) web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 1

1 ML01 decorative LED mini-light GROUND/WALL LIGHTS A modern and elegant LED decorative mini-light. Driven by just one high power Luxeon LED, the ML01 is designed to add style to floors, bars, walls and ceilings. Walkover and IP68 rated, allows for installation anywhere, and the clever and stylish design of the light output at 45 means no glare even when looking directly at it, making this product perfect for stair facings. Power consumption is just 1w; making running costs incredible low, whilst visual impact is high. Maintenance free. LED available in: ML01 WH BL RED Clear epoxy lenses 1m 0.35mm red and black Teflon cable 31mm 17mm 1m AMB GRE Colour binning information & FAQ: ( see page 131-13) Use with power supplies: PLD 1-16 (dimming), PLU350 1-9, PLR 1-5, PLS 1- (p68) ** IP68 at 1bar ( 9m water ) ** If used in bathroom ZONE 0 or 1, it must be used in ** conjunction with suitable power supply ( see page 68) 13 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

1 000088/1 001415/1 GROUND/WALL LIGHTS ML01 KIT x5 ML01 lighting kit All you need for a great LED installation in one box. 5 x ML01 (your choice of colour), PLU350 1-9 power supply, 0 x UY waterproof connectors and 100m of CR135 cable. web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 14

1 ML0 decorative LED mini-light WALL LIGHTS Contemporary, chic, yet rugged. The ML0 decorative minilight is driven by just one high power Luxeon LED. Add style to floors, bars, walls and stairs. For use indoors or out, the maintenance free flexibility, combined with exceptionally long life and stainless steel construction, mean this unit will look great for many years to come. Big on style, small in cost. Ideal for step lighting, casts a beam of light across the tread when mounted on the side of steps. ML0 LED available in: Clear epoxy lenses WH BL RED 1m 0.35mm red and black Teflon cable 38.5mm 10mm 10mm AMB GRE Colour binning information & FAQ: ( see page 131-13) Use with power supplies: PLD 1-16 (dimming), PLR 1-5, PLU350 1-9, PLS 1- (p.68) photometric data: ML0 ** IP68 at 1bar ( 9m water ) ** If used in bathroom ZONE 0 or 1, it must be used in ** conjunction with suitable power supply ( see page 68) 15 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

1 000450/1 WALL LIGHTS web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 16

1 ML03 aluminium mini halo LED light WALL LIGHTS Add impact to any area with the new ML03 wall light. An elegant halo effect is created around the unit in a choice of five fixed colours. Finished with a high class anodise, this trendy mini-light will look great in superior establishments and homes. Easy to install and maintenance free. NEW 1 000088/1 30mm 14 16.5 1m LED available in: WH BL RED AMB GRE Colour binning information & FAQ: ( see page 131-13) ML03 Use with power supplies: PLD 1-16 (dimming), PLU350 1-9, PLR 1-5, PLS 1- (p68) 1m 0.35mm red and black Teflon cable ** If used in bathroom ZONE 1, it must be used in conjunction with suitable power supply ( see page 68) 17 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

WL040 mini halo LED wall-light A luxury wall light, offering great aesthetics, combined with high power Luxeon LED output. The new WL040 is ideal for prominent installation, whether outdoors or in. Being easy to install and offering long maintenance free life, this unit demands consideration for any modern project. WALL LIGHTS 000570/1 NEW WL040 Use with power supplies: PLD 1-16 (dimming), PLU350 1-9, PLR 1-5, PLS 1- (p68) 1m 0.35mm red and black Teflon cable 50mm 5mm 11mm LED available in: WH BL RED AMB GRE Colour binning information & FAQ: ( see page 131-13) ** If used in bathroom ZONE 1, it must be used in ** conjunction with suitable power supply ( see page 68) web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 18

1 MC010 mini cube LED wall-light WALL LIGHTS Brand new for 006, the mini cube features a spot lens creating an awesome light effect on the wall above it. A must have for modern establishments wishing to create the right image. IP rated, easy to install, low running costs, and bullet-proof reliability are just some of the features of this stylish light. NEW 1 0001999/1 MC010 Comes with bespoke wall plug for easy installation 1.5m 0.35mm red and black Teflon cable LED available in: photometric data: MC010 34mm 0mm 9.5mm WH BL RED AMB GRE Colour binning information & FAQ: ( see page 131-13) Use with power supplies: PLD 1-16 (dimming), PLU350 1-9, PLR 1-5, PLS 1- (p68) ** If used in bathroom ZONE 1, it must be used in ** conjunction with suitable power supply ( see page 68) 19 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

MC00 double mini cube LED wall light WALL LIGHTS 000395/1 NEW Brand new for 006, the double cube features two spot lenses, creating an awesome light effect on the wall above and below. A must have for modern establishments wishing to create the right image. IP rated, easy to install, low running costs, and incredible reliability are just some of the features of this stylish light. photometric data: MC00 MC00 LED available in: WH BL RED AMB GRE Comes with bespoke wall plug for easy installation 1.5m 0.35mm red and black Teflon cable Colour binning information & FAQ: ( see page 131-13) 34mm 0mm 9.5mm Use with power supplies: PLD 1-16 (dimming): max 8 fittings PLU350 1-9: max 4 fittings, PLR 1-5: max fittings PLS -3: max 1 fitting, PLS 1-: max 1 fitting 58mm ** If used in bathroom ZONE 1, it must be used in ** conjunction with suitable power supply ( see page 68) web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 0

1 OCTOLED 010 S rotatable octagonal LED wall-light WALL LIGHTS NEW In a world driven by design, Collingwood have really hit the OCTOLED mark. Combining style, function and effect with the brand new OCTOLED. This eight sided wall light featuring a high-class anodised finish, with four high powered LEDs on opposing sides, creates a light effect that is both modern and elegant. The wall-fixing bracket is ingenious too, not only does it make installation very quick and easy, but it also allows for simple rotation of the unit to select the required light angle. The OCTOLED brings an instant wow factor to any room or wall, indoors or out. Comes with bespoke wall fixing for easy installation 1.5m 0.35mm red and black Teflon cable 1 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

1 000595/1 WALL LIGHTS NEW 100mm 38mm LED available in: WH BL RED AMB GRE Colour binning information & FAQ: (see page 131-13) * If used in bathroom ZONE 1, it must be used in conjunction with suitable power supply (see page 68) web: www.collingwoodlighting.com email: sales@collingwoodgroup.com

1 WL030 x0w dual 0w up/down light Up and down lights are becoming an ever more popular way of illuminating corridors and adding pizzazz to rooms WALL LIGHTS and entrances. Collingwood s WL030 offers a stainless steel finish and a more aesthetically pleasing twist to the larger more cumbersome units widely available today. Two 0w dichroic lamps (included) provide the light output. WL030 47mm 137mm 68mm Photometric data as GL01 (p.08) 1 000340/1 3 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

SL010 WB wall bracket attachment for SL010 0w WALL LIGHTS Transform the ever-popular SL010 spike light (p35) into a wall mounted light, with this simple wall bracket. Just unscrew the spike and screw in the SL010 WB. Easy! SL010 WB 0000310/1 Fittings included 61.5mm.5mm web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 4

1 WL00 wall mounted 35w dichroic light WALL LIGHTS Made using the highest-grade stainless steel (316), the WL00 is a top quality wall light perfect for indoor or outdoor applications. Its executive look allows for prominent positioning, whilst a 35w dichroic lamp delivers the output. 1 000479/1 NEW WL00/LED3 FLOOD or SPOT wall mounted LED light This cool to touch stylish satinless steel wall light is IP54 rated making it suitable for outdoor or indoor installations. Made to a high specification the WL00/LED3 features the latest in LED technology. Three 1w high power LEDs give an awesome lighting effect. It s built to last too, you can expect 10+ years of maintenance free LED light output. 0004999/1 3 4 WL00/TRISTAR MASTER WL00/TRISTAR SLAVE wall mounted colour changing LED lights The exciting new WL00/TRISTAR is pre-wired for your convenience, and contains the latest in colour changing LED technology. You can expect many years of reliable, maintenance free coloured light from this quality unit. It's so easy to use with a simple remote control unit. A master and slave system offers the added benefit of being able to control many units at the same time, at the touch of a button. (see page 76 for more information on master and slave) 3 4 0007059/1 00069/1 5 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

Use with transformers: 6.5mm 88mm 64mm photometric data: WL00 35w SUN60, SKY160, ET00, LUNAR 105 (p13) WALL LIGHTS WL00/LED3 FLOOD LED3 available in: WH BL NEW WL00/LED3 SPOT Colour binning information & FAQ: ( see page 131-13) photometric data: WL00/LED3 SPOT photometric d WL00/LED3 FLOOD Use with power supplies: PLD 1-16 (dimming), PLU350 1-9, PLR 1-5 (p.68) ** Approx beam angle Use with TRISTAR REMOTE (for more information see pages 75 & 77) photometric data: WL00/TRISTAR ML0 Collingwood Showroom, Northants Use with power supplies: PDC/100/4, PDC/00/4 (p.74) web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 6

1 MS01 adjustable mini spotlight 3 MF01 adjustable mini floodlight MS0 IP67 adjustable mini spotlight 4 MF0 IP67 adjustable mini floodlight WALL LIGHTS NEW Mini wall lights are stylish and functional. Great for lighting pictures and focal items, as well as using for reading or simply adding style to walls, wooden beams, and ceilings. Marine grade stainless steel and Luxeon LED power of course! Available with spot or flood lenses, and in high or low IP ratings depending on application. MS01 MF01 MS0 MF0 30mm 35mm LED available in: 38.5mm WH BL RED AMB GRE Colour binning information & FAQ: ( see page 131-13) Use with power supplies: PLD 1-16 (dimming), PLU350 1-9, PLR 1-5, PLS 1- (p68) photometric data: MS01/MS0 photometric d MF01/MF0 7 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

5 WB/M 01 6 WB/M 0 double bracket single bracket for MS01/MF01/MS0/MF0 WALL LIGHTS dimensions: dia 45mm height 10mm dimensions: length 35mm width 75mm height 10mm 1 3 0001999/1 000199/1 0001999/1 000199/1 4 5 0000374/1 6 0000638/1 web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 8

7 WB/M 05 x5 bracket for MS01/MF01/MS0/MF0 WALL LIGHTS Aim the light exactly where it is needed. Or simply where ever the feeling takes you. dimensions: length 35mm width 180mm height 10mm 8 WB/M 00 blank bracket Drilled to your requirements dimensions: length 35mm width 180mm height 10mm 9 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

9 WB/M 0/30 double 30 bracket Wall bracket for MS and MF. This bracket has a 30 angle making it perfect for use as a reading light. Only w which allows it to light the book and not the whole room. Very popular in hotels. 10 WB/M BOX recessed wall box WALL LIGHTS Wall box to simplify installation of WB/M 0/30. Large enough to hold a power supply, making it perfect for dimensions: length 44mm width 75mm height 16mm replacing mains powered lights. 7 0000969/1 8 000095/1 9 0000695/1 10 0000110/1 web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 30

LED LYNX DOWN LIGHTS Single 1w high power LED 1m lead and plug supplied Heatsink improves LED life, colour stability and light output 30mm 19mm 1m Please note: If the plugs are cut off the LED LYNX, it renders it a non returnable item LED available in: WH BL RED AMB GRE Colour binning information & FAQ: ( see page 131-13) Use with power supplies: PLD 1-16 (dimming), PLU350 1-9, PLR 1-5, PLS 1- (p68) 31 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

LED LYNX 1m EXT plug and play extension for LED LYNX The LED LYNX 1m EXTENSION means no more difficult wiring Adding more LEDs is easy... just PLUG and PLAY DOWN LIGHTS 34mm 19mm 19mm 1 LED LYNX mini LED spotlight This classic LED mini light remains hugely popular, it's been installed everywhere from children's bedroom ceilings to west end stages, from fashionable restaurants to old fashioned narrow boats, there really is no end the applications suitable for this high powered mini LED. Featuring an incredibly simple plug and play system, even the largest of applications can be wired in minutes. 1 0000831/1 0000095/1 web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 3

1 DL110 aluminium LED downlight (fig1) 3 DL130 aluminium LED downlight DL10 aluminium LED downlight (fig) DOWN LIGHTS NEW fig 1 fig Style, Function, elegance. This new LED down light range combines all three. The latest LED technology means this range can be used as part of a scheme as task lighting and/or decorative lighting. Made to the highest specification, using top grade materials, this range is a must for contemporary rooms and corridors. Available as a singe, triple, quadruple or five bar unit depending on the application. Plug and play wiring ensures quick and easy installation. Maintenance free. DL range supplied with Collingwood s brilliant Plug and PLay system (see p3 for more information) DL110/ DL10 DL130 1m 0.35mm red and black cable 1m 0.35mm red and black cable 51.5mm 60mm 17mm 17mm photometric data: DL110/DL010 photometric data: DL130 photometric data: DL330 (opposite page) photometric data: DL430 (opposite page) photometric data: DL530 (opposite page) 33 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095 1 0001985/1 3 0001985/1 0001985/1

4 DL330 WH triple adjustable LED downlight 1m 0.35mm red and black cable attached to each LED unit dimensions: length 60mm width 164mm dimensions: height 17mm DOWN LIGHTS 4 0004764/1 5 DL430 WH x4 adjustable LED downlight NEW 1m 0.35mm red and black cable attached to each LED unit dimensions: length 11mm width 11mm dimensions: height 17mm 5 0005955/1 6 DL530 WH x5 adjustable LED downlight 1m 0.35mm red and black cable attached to each LED unit dimensions: length 60mm width 68mm dimensions: height 17mm 6 0007443/1 web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 34

1 SL010 0w 0w dichroic spikelight 1 0001418/1 0000469/1 SPIKELIGHTS 35 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

1 SL010 0w 0w dichroic spikelight A must for the garden, pathways and flower beds, Spike lights offer stylish lighting and function. The SL010 0w, features marine grade stainless steel construction, and contains a 0w dichroic lamp for strong light output. 3m HO5-RN-F cable attached photometric data: SL00 0w SPIKELIGHTS 49mm 66mm 157mm 3m Use with transformers: SET/105/C (p17) Use JB1 for easy waterproof wiring (p65 & 17) SL010 60cm SPIKE 600mm spike extension for SL010 / SL00 fig A quick and easy conversion for your SL010 spike light. This long spike allows the head to be raised above ground, or use to stabilise a ground level unit located in very soft ground. Fig1: normal SL010 Fig: SL010 with 60cm SPIKE fig1 web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 36

1 SL00 35w dichroic spikelight Made using the highest-grade stainless steel (316), The SL00 is a top quality spike light perfect for driveways, SPIKE LIGHTS paths, decking and the illumination of buildings, trees and statues. Its executive look allows for prominent positioning, whilst the pre installed 3m long rubberised cable makes installation quick and easy. A 35w dichroic lamp comes as standard for a strong light output. 3m HO5-RN-F cable attached Photometric data as WL00 35w (p.6) 6.5mm 89.5mm 157mm 3m Use with transformers: SET/105/C (p17) Use JB1 for easy waterproof wiring (p65 & 17) 1 000479/1 37 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

SL00/TRISTAR MASTER 3 SL00/TRISTAR SLAVE colour changing spikelight master unit colour changing spikelight slave unit The exciting new GL030/TRISTAR is pre-wired for your convenience, and contains the latest in colour changing LED technology. It's made from the highest grade stainless steel and is contemporary in design making it ideal for prominent positioning. You can expect many years of reliable, maintenance free coloured light from this quality unit. It's so easy to use with a simple remote control unit (fig1). A master and slave system offers the added benefit of being able to control up to 33 units at the same time, at the touch of a button. (see page 76 for more information on master and slave) SPIKE LIGHTS fig1 NEW 1.m HO5-RN-F cable attached Photmetric data as WL00/TRISTAR (p.6) 6.5mm 89.5mm 157mm 1.m Use with power supplies: PDC/100/4, PDC/0/4, PDC/00/4 (p.74) 3 0007059/1 00069/1 web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 38

1 SL030 LED spikelight A discreet and modern spike light for use in the garden, pathways and flower beds, Spike lights offer stylish lighting and function. The SL030 features marine grade stainless steel SPIKE LIGHTS construction, and contains a Luxeon high power LED. This means long life, low running costs and easy installation. 3m HO5-RN-F cable attached 4mm 50mm 47mm 30mm 3m photometric data: SL030 LED available in: WH BL RED AMB GRE Colour binning information & FAQ: ( see page 131-13) Use with power supplies: PLD 1-16 (dimming), PLU350 1-9, PLR 1-5, PLS 1- (p68) Use JB for series wiring (p65) 39 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

1 000595/1 SPIKE LIGHTS web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 40

1 BOL LED 00 T1 contemporary aluminium LED bollard LED BOLLARDS NEW LED available in: Brand new for 006, The Collingwood bollard range, offers big impact at a small price. This robust product is finished with in classy anodise, and WH BL RED topped with a halo effect LED light. Puts the finishing touch to pathways, car parks and steps. AMB GRE Colour binning information & FAQ: ( see page 131-13) Use with power supplies: PLD 1-16 (dimming), PLU350 1-9, PLR 1-5, PLS 1- (p68) 97mm Use JB for series wiring (p65) 640mm 41 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095 1 0003784/1

BOL LED 00 T contemporary aluminium LED bollard LED BOLLARDS NEW LED available in: Brand new for 006, The Collingwood bollard range, offers big impact at a small price. This robust product is finished with in classy anodise, and topped with a radial dot style. Puts the finishing touch to pathways, car parks and steps. WH BL RED AMB GRE Colour binning information & FAQ: ( see page 131-13) Use with power supplies: PLD 1-16 (dimming), PLU350 1-9, PLR 1-5, PLS 1- (p68) 97mm Use JB for series wiring (p65) 640mm web: www.collingwoodlighting.com 0003784/1 email: sales@collingwoodgroup.com 4

1 BOL LED 1 quality LED bollard A classic wooden bollard with a modern twist. Designed by LED BOLLARDS T.Cox. The BOL LED 1 features quality Iroko wood that requires neither treatment nor varnish. It contains a high power Luxeon LED, and due to the cleverly designed cut angles, looks fantastic when approaching from any direction. A tasteful addition to paths and driveways. FSC approved wood 1.8m HO5-RN-F cable attached Use with chain or rope to edge path (not supplied) Available in Oak and other woods to special order 95mm 800mm 00 photometric data: BOL LED 1 LED available in: WH BL GRE Colour binning information & FAQ: ( see page 131-13) Use with power supplies: PLD 1-16 (dimming), PLU350 1-9, PLR 1-5, PLS 1- (p68) Use JB for series wiring (p65) 43 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

1 0009750/1 0001650/1 LED BOLLARDS NEW BOL LED BRACKET metal stand for BOL LED 1 10mm 175mm 85mm A simple and robust ground fitting for use when installing the BOL LED 1 on hard surfaces. All fixings bolts supplied with bracket web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 44

1 000415/1mtr 0000410/1 3 0001060/1 STRIP LIGHTING 1 LED/IP/ST 6x1 flexible waterproof LED strip See our choice of metal profiles to suit all installations. WH BL RED Cut point every 167mm Cut point every 167mm Cut point every 78mm WH BL RED Max length of LED/IP/ST per power supply PWR SUPPLY WH, BL, GR AMB, RED PDC/10/4 m 4m AMB Cut point every 78mm GRE GRE Cut point every 167mm PDC/0/4 5m 8m PDC/5/4 6m 10m PDC/100/4 7m 43m PDC/00/4 50m 75m Stair edging, bar edging, floor marking and wall enhancing. LED IP strip can do it all. Hard wearing and suitable for indoor and outdoor applications, this flexible light strip really is the solution. 45 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095 Next day delivery is NOT available on the LED STRIP range

CONNECTOR 6x1 0.45m connector set for LED/IP/ST 6x1 3 CONNECTOR 6x1 5m long connector set for LED/IP/ST 6x1 STRIP LIGHTING 450mm / 5000mm 41mm 3mm 1m (min) 18mm 16 4 U PROFILE 6x1 1m mounting profile for LED/IP/ST Clear PVC mounting profile for LED/IP/ST 6x1 Self adhesive backing Supplied in 1m strips 18.mm 8.6 1m web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 46

1 STAIR PROFILE 6x1 SILVER STAIR PROFILE 6x1 BLACK stair nosing for LED/IP/ST 6x1 stair nosing for LED/IP/ST 6x1 STRIP LIGHTING 35mm Supplied in 1, or 3m lengths 6mm 1 / / 3m 1 0001835/1 000045/1 47 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

3 4 000577/1 000787/1 STRIP LIGHTING 3 PROFILE 6x1 SILVER 4 PROFILE 6x1 BLACK wall/floor nosing for LED/IP/ST 6x1 wall/floor nosing for LED/IP/ST 6x1 Supplied in 1, or 3m lengths 40mm 10m 1 / / 3m web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 48

1 LINE PROFILE 0mm floor nosing for LED/IP/ST 6x1 STRIP LIGHTING 51mm Supplied in 1, or 3m lengths Clear or Frosted cover available (see opposite page) 3 fixing clips per metre recommended (see opposite page) mm 1 / / 3m Use U PROFILE 6x1 (p46) to secure LED/IP/ST in LINE PROFILE 1 0001563/1 0000454/1 3 0000881/1 4 000113/1 5 0000149/1 49 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

LINE PROF END CAP end cap for LINE PROFILE 0mm 1 End Cap per end Fixings included STRIP LIGHTING 3 ACRYLIC COVER CLEAR 4 ACRYLIC COVER FROSTED cover for LINE PROFILE 0mm cover for LINE PROFILE 0mm Supplied in 1, or 3m lengths 5 LINE PROF FIX CLIP fixing clip for LINE PROFILE 0mm 3 fixing clips per metre recommended web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 50

1 EL/WIRE flexible electro luminescent wire FIBRE OPTICS 1 000995/1mtr 000750/50 3 0003960/1 Super flexible, and easy to use. Make illuminated words, symbols and signs in seconds! Great effect, and when used with the EL Inverter, you have the options of flashing and fading the wire. Simple installation, simple to use - simply dazzling! EL/WIRE CLIP clip for EL/WIRE Fully flexible Must be used with EL/WIRE Inverter (see opposite page) Supplied on up to 100m reels (priced per metre) up to 100m 5mm Self adhesive clip for attaching EL/WIRE to dry clean surfaces 50 pieces per pack 51 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

3 EL/WIRE INVERTER EL/WIRE power supply FIBRE OPTICS Will power up to 100m of EL/WIRE 167mm 13.5mm 73mm web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 5

1 FIBRE LED 1/30 fibre optics lights FIBRE OPTICS 1m length of fibre optic 30 strands x 1mm fibres Use with FIBRE LED LIGHT (see opposite page) Traditionally fibre optic lights have big drawbacks! Expensive to buy and run, noisy fan units, and cumbersome, heavy drivers unsuitable for mounting above many ceilings. That's why Collingwood s new Fibre optic system is so popular! Using just 1w of LED power to light up 30 strands really saves money; plus the life span of the LED is years not months as is normal with many fibre optic lamps. The Fibre Led Light unit runs silently and weighs less than a golf ball, making it suitable for mounting on even the most sensitive ceiling tiles with no fuss. This flexibility in positioning the fibre led light means you can run far shorter lengths of fibre optic cable. Again this saves much expense! Get an awesome fibre optic installation, at a fraction of the costs with this new, easily installed, maintenance free system. dimensions: length 1m 53 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

FIBRE LED LIGHT light injector for FIBRE LED 1/30 0.35m teflon cable attached Twinkle effect can be achieved with RGBox power supply (p.79) 35mm 6mm FIBRE OPTICS 1 0003900/1 000561/1 web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 54

1 LED STRIP self adhesive flexible LED strip LED COMPONENTS Please note: This is a non returnable item Flexible LED strip, with its self adhesive backing is great for fast installations into signs, displays and pelmets. With one LED every 0mm, the light output is spread evenly across the project for a professional look. Cut points every 100mm. 1 000088/1 55 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

LED available in: WH BL LED every 0mm Cut point every 100mm Solder on supply leads at any solder point (every 100mm) Foil backed flexible PCB dissipates heat from LED (improves LED life and colour stability) Self adhesive backing Power consumption: 5w per metre (approx) dimensions: length 1m width 8mm dimensions: height 3mm Colour binning information & FAQ: ( see page 131-13) Use with power supplies: PDC/10/4: up to m, PDC/0/4: up to 4m, PDC/100/4: up to 0m, PDC/00/4: up to 40m When using these high power LED drivers in conjunction with LED STRIP, it is necessary to make a power connection every 4m to avoid excessive voltage drop along the length of the strip LED COMPONENTS We recommend a minimum cable cross-section of 0.75mm and maximum cable of 15m (longer cable runs can be used with larger cross-section cable) 1 0005618/1mtr web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 56

1 LED3 FLOOD MR16 LED floodlight LED3 SPOT MR16 LED spotlight LED COMPONENTS A 50mm fitting suitable for installation into ground lights, down lights, wall lights, or anywhere a MR16 50mm lamp might otherwise by installed. The LED 3 features not one, but three high power LEDs for a really powerful decorative light output. Available in a Spot or Flood lens format. Plug n Play simplicity for fast, trouble free installation. fig1 Use with LED LYNX 1m EXT (p3) LED/3 FLOOD LED/3 SPOT LED available in: Incorporated heat-sink for greater heat WH BL dissipation (fig1) 50mm 3mm 1.1m Colour binning information & FAQ: ( see page 131-13) Use with power supplies: PLD 1-16 (dimming): max 4 fittings PLU350 1-9: max 3 fittings PLR 1-5: max 1 fitting, PLR -3: max 1 fitting Now you can use the LED3 with the fantastic LED EP01 for a reliable, easily installed emergency lighting solution. (p.130) LED3 and LED EP01 both come with Collingwood s brilliant Plug and Play wiring system. (p3 for further information) photometric data: LED/3 SPOT photometric d LED/3 FLOOD 57 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095 ** Approx beam angle

1 000650/1 000650/1 3 0004999/1 4 0004999/1 LED COMPONENTS 3 GL030/LED3 FLOOD or SPOT 4 WL00/LED3 FLOOD or SPOT LED groundlight LED wall light Perfect for paths, decks and gardens. Three 1w high power LEDs inside giving 38 Lux at 1m (white LED spot) make this a striking addition to the GL030 range. This stylish satinless steel wall light is IP65 rated making it suitable for outdoor or indoor installations. The three 1w high power LEDs give an amazing lighting effect. web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 58

1 LED POWER FLOOD C111 AR111 flood light LED POWER SPOT C111 AR111 spot light LED COMPONENTS Awesome light output! Designed for use in retail, bars, shopping centres, and public buildings. The LED Power unit is 111mm in diameter, meaning it will fit in any of the widely available AR111 downlights housings. Comes in a kit with its own power supply, and connections. Available with Spot or flood lens. ENERGY RATING - A fig1 FLOOD SPOT Replaces AR111 lamps for cool light and long life display lighting 7 high output 3w LEDs Incorporated heat-sink for greater heat dissipation Supplied complete with power supply ready for connection to mains (only use with 700mA constant current power supply provided. see fig1) photometric data: LED POWER SPOT C111 photometric d LED POWER FLOOD C111 111mm 50mm ** Approx beam angle 59 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

1 0009900/1 0009900/1 LED COMPONENTS web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 60

1 AQUA SPOT mini LED with waterproof housing AQUA LED mini waterproof LED LED COMPONENTS Waterproof LED with 10 lens. Designed as a useful component for the signage, display, and Point of Sale markets. IP67 rated Luxeon LED with 110 beam angle. Designed as a useful component for the signage, display, and Point of Sale markets. 30mm flying leads Max temp for back of circuit board: 80 C 30mm flying leads Max temp for back of circuit board: 80 C 9mm 3mm 9mm 18mm 5mm Both products have LEDs available in: WH BL RED AMB GRE photometric data: AQUA SPOT Colour binning information & FAQ: ( see page 131-13) Use with power supplies: PLD 1-16 (dimming), PLU350 1-9, PLR 1-5, PLS 1- (p68) 61 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095 ** Approx beam angle

3 LEDFLOOD/W waterproof LED light 1 0001163/1 0000936/1 3 00017/1 LED COMPONENTS IP65 rated Luxeon LED with 45 beam angle. Designed as a useful component for the signage, display, and Point of Sale markets, as well as fitting into MR11 (35mm) size down light/ groundlight fittings. LED available in: WH BL RED AMB GRE 30mm flying leads (HO5RN-F) Max temp for back of circuit board: 80 C Colour binning information & FAQ: ( see page 131-13) 35mm 7mm Use with power supplies: PLD 1-16 (dimming), PLU350 1-9, PLR 1-5, PLS 1- (p68) 30mm photometric data: LEDFLOOD/W ** Approx beam angle web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 6

1 LED TRIFLOOD triple LED floodlight LED TRISPOT triple LED spotlight LED COMPONENTS 1 000310/1 000400/1 This Luxeon powered unit has three 1w LEDs combined with a flood lens. Fits anywhere an ordinary 50mm MR16 lamp fits, IE low voltage down light housings, wall lights, ground lights etc. Many years of maintenance free light with this easy to install product. This Luxeon powered unit has three 1w LEDs combined with a spot lens. Fits anywhere an ordinary 50mm MR16 lamp fits, IE low voltage down light housings, wall lights, ground lights etc. Many years of maintenance free light with this easy to install product. Mini floodlight with 3 x 1w LEDs Mini spotlight with 3 x 1w LEDs 1m PVC cable supplied 1m PVC cable supplied 50mm 50mm 4mm 30mm photometric data: LED TRISPOT photometric data: LED TRIFLOOD Use with power supplies: PLD 1-16 (dimming): max 4 fittings PLU350 1-9: max 3 fittings, PLR 1-5: max 1 fitting PLS -3: max 1 fitting 63 tel`: +44 (0)1604 495151 fax: +44 (0)1604 495095

3 LEDSPOT/35 MR11 LED replacement 4 LED MONOSPOT single LED light LED COMPONENETS This Luxeon powered unit has a single 1w LED combined with a spot lens. Fits anywhere an ordinary 35mm MR11 lamp fits, IE low voltage down light housings, wall lights, ground lights etc. Many years of maintenance free light with this easy to install product. This Luxeon powered unit has a single 1w LED combined with a spot lens. Fits anywhere an ordinary 35mm MR11 lamp fits, IE low voltage down light housings, wall lights, ground lights etc. Many years of maintenance free light with this easy to install product. Max temp for back of circuit board: 70 C 1m PVC cable supplied 1m PVC cable supplied Available with white LED only 35mm 8mm 35mm 19mm LEDSPOT/35 available in: WH BL RED AMB GRE Colour binning information & FAQ: ( see page 131-13) Use with power supplies: PLD 1-16 (dimming), PLU350 1-9, PLR 1-5, PLS 1-, PLS -3 (p68) 3 4 00017/1 0001381/1 photometric data: LEDSPOT/35 photometric data: LED MONOSPOT web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 64

1 JB1 PARALLEL waterproof junction box WIRING For parallel wiring of LED or low-voltage fittings 1 input, 1-3 outputs 4v, 150w max Use HO5RNF x 0.75 cable (p67) Cable diameter: 6.5-8.8mm Output may be wired to additional JB1 for wiring multiple LED fittings 50mm 30mm A waterproof junction box for parallel wiring of low voltage lighting or specific types of LEDs. Featuring 1 input and up to 3 outputs, the JB1 makes outdoor installations quick and easy. ** IP68 m max JB SERIES waterproof junction box As JB1 but... For series wiring of LED fittings 48v DC 0w max A waterproof junction box for series wiring. This includes all Luxeon powered LED's. Featuring 1 input and up to 3 outputs, the JB makes series wired outdoor installations quick and easy thanks 1 0000418/1 0000418/1 to a clever circuit board inside that has the series wiring already done for you. 65 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

3 WC 5-9 quick release waterproof joint 3 4 0000630/1 0000050/1 0000500/100 WIRING The WC 5-9 is a IP68 waterproof cable connecter with the extra benefit of being simple to disconnect/reconnect at any time by simply releasing the two half's of the connector. Ideal for water features, outdoor lighting and garden equipment. 38mm 15mm technical data: Volatge max: 50v Rating max: 10A Cable: 5-9mm outside diameter Cable: or 3 core Cable: Up to 1.5mm conductors Approval: B5 5733 ** IP68 at bar 4 UY quick waterproof connector Insert wires into holes until resistance then push down on button Use CR135 cable (p67) 10mm 15.5mm 8.5mm web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 66

1 WCR 75 BLACK WCR 375 BLACK rubber core cable rubber 3 core cable WIRING Rubber cable HO5RN-F x 0.75mm Supplied on 100m reels Rubber cable HO5RN-F 3 x 0.75mm Supplied on 100m reels 3 CR 135 4 LED RGB CABLE teflon cable PVC cable PVC cable Suitable for wiring RGB LED Red or Black Teflon cable systems HO5RN-F 4 x 0.75mm 1 x 0.35mm Supplied on 100m reels Supplied on 100m reels Also available by the metre 5 DMX CABLE shielded cable Shielded twisted pair cable Suitable for DMX signal wiring Supplied on 100m reels Also available by the metre 1 3 4 5 00800/100m 004000/100m 003500/100m 010600/100m 00470/100m 67 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

1 PLD 1-16 350mA dimming driver PDC DIMMER dimmer switch POWER SUPPLIES 350mA constant current power supply Dimmer for use in conjunction with Dimmable with 1-10v dimmer control PLD 1-16 and PDC/0/4 (p73) Dim up to 16 Luxeon LED ( series circuits NB: PDC DIMMER does not operate ON/OFF with 8 LED each) function. A separate mains switch is Use with PDC DIMMER required 51mm 108mm 0.5mm 36mm 3mm 4mm 36mm Bathroom Information When using 350mA LEDs in bathroom ZONE 0, 1 or use: PLD 1-16, PLR 1-5, PLS 1- or PLS -3 ** Dimming power supply web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 1 0003706/1 0001055/1 68

1 PLR/350 1-5 350mA LED power supply PLU/350 1-9 350mA LED power supply POWER SUPPLIES PLR PLU Direct constant current power supply Direct constant current power supply Fixed flying leads Mains loop in / loop out terminals Protected against: Mains surge, Protected against: Mains surge, Protected against: Short circuit, Protected against: Short circuit, Protected against: Over-load, Protected against: Over-load, Protected against: Over heating Protected against: Over heating Input voltage: 0-40v Output voltage: 350mA for 1-5 1w LED (output voltage varies from 0-30v DC depending on number of LED in circuit) Input voltage: 110-40v (international) Output voltage: 350mA for 1-9 1w LED (output voltage varies from 0-48v DC depending on number of LED in circuit) 53mm 48mm 111mm 8mm 19mm Bathroom Information When using 350mA LEDs in bathroom ZONE 0, 1 or use: PLD 1-16, PLR 1-5, PLS 1- or PLS -3 1 000104/1 0001195/1 69 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

3 PLS/350 1-350mA LED power supply 4 PLS/350-3 350mA LED power supply Direct constant current power supply No terminal covers: Must be built in Protected against: Mains surge, Protected against: Short circuit, Protected against: Over-load, Protected against: Over heating Input voltage: 0-40v Output voltage: 350mA for 1- and -3 1w LED (output voltage varies from 0-14v DC depending on number of LED in circuit) 50mm POWER SUPPLIES PLS 18mm 3mm SERIES WIRING DIAGRAM wire high power LEDs in series Incorrect wiring of LEDs can result in irreparable damage to the LEDs and power supply web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 3 0000880/1 4 0000935/1 70

1 BT CHARGER battery charger POWER SUPPLIES Charger suitable for charging BT/1v/3AH May be left permanently charging without damage to the battery DO NOT leave connected to battery when mains supply is switched off. This will result in discharging battery BT/1v/3AH rechargable battery 3 AH 1v lead acid sealed battery Suitable for use with PLDCC/350/1-4 to power 350mA high output LEDs Power up to 3 LEDs with single battery (1v DC input) Use batteries connected in series to run our 4v DC LED product DO NOT leave in discharged state This will damage the plates of the battery dimensions: length 68mm width 134mm dimensions: height 61mm dimensions: (65mm including terminals) 1 0001150/1 0001485/1 71 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

3 PLDCC/350/1-4 luxeon LED power supply Direct constant current power supply Protected against: Short circuit, Protected against: Over-load, Protected against: Over heating Input voltage: 1-4v Output voltage: Output voltage varies from 0-15v DC depending on number of LED in circuit Power up to 3 LEDs with 1v input or up to 6 with 4v input 50mm POWER SUPPLIES 18mm 3mm BT/1v/3AH - PLDCC/350/1-4 WIRING DIAGRAM wire high power LEDs in series Incorrect wiring of LEDs can result in irreparable damage to the LEDs and power supply web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 3 0000937/1 7

1 PDC/10/1 1v LED driver PDC/10/4 4v LED driver 3 PDC/0/4 0w, 4v LED driver POWER SUPPLIES 1 4 Independent LED power supply Screw wire terminals Protected against: Mains surge, Independent LED power supply Protected against: Mains surge, Protected against: Short circuit, Protected against: Short circuit, Protected against: Over-load, Protected against: Over heating Protected against: Over-load, Protected against: Over heating Input voltage: 0-40v Output voltage: 4v DC 0x max Input voltage: 0-40v Output voltage: PDC/10/1 1v DC Output voltage: PDC/10/4 4v DC Power: 0w Power: 10w 19.5mm 47.5mm 146mm 9mm 3mm 18mm 4 PDC DIMMER dimmer switch Dimmer for use in conjunction with PLD 1-16 (p68) and PDC/0/4 1 3 4 0001067/1 0001067/1 0001654/1 0001055/1 73 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095 ** Dimming power supply

5 PDC/5/4 5w, 4v LED driver 6 PDC/100/4 100w, 4v LED driver POWER SUPPLIES Input: 110-40v (international) Input: Switchable between Output: 4v DC 5w Max 110 and 40v Output: 4v DC 100w Max 51mm 91mm 98.5mm 199mm 8mm 38mm 7 PDC/00/4 00w, 4v LED driver To meet regulations all PDC power supplies must be enclosed in a secure ventilated housing so that access to the terminals can only be made by a qualified electrician Input: 110-40v (international) Output: 4v DC 00w Max 98.5mm 10mm 50mm 5 0001654/1 6 000300/1 7 0007000/1 web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 74

1 TRISTAR MASTER colour changing master unit TRISTAR SLAVE colour changing slave unit COLOUR CHANGE The exciting new TRISTAR contains the latest in colour changing LED technology. You can expect many years of reliable, maintenance free coloured light from this quality unit. It's so easy to use with a simple remote control unit. Designed to fit in to any 50mm MR16 down light housing, wall light, spike light, or ground light. The master and slave system offers the added benefit of being able to control many units at the same time, at the touch of a button. Simple co-ordinated colour change With TRISTAR MASTER you can control up 3 TRISTAR Slaves units 4 simple colour change programs: Slow/Fast flash change Slow/Fast smooth change 16 preset colours 4 brightness levels (dimming) MASTER/ SLAVE Retro-fit into existing MR16 fittings or slot straight into new purpose built installations Control up to 33 LED MR16 units from 1 remote control (sold separately) 4v DC power input Signal output up to 3 slave units 4v DC power input Power up to 4 per PDC/0/4 power supply, 10 with PDC/100/4 and 33 with PDC/00/4 (p74) 50mm 5mm NB: Max length between units: 80m 3 TRISTAR REMOTE control for TRISTAR MASTER/SLAVE & TRISTAR RGB Control up to 33 TRISTAR units at once 4 colour change programs 4 brightness levels 15 colour settings Lock facility ON/OFF control photometric data: TRISTAR MASTER/SLAVE 75 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

1 3 0004580/1 0003750/1 0001400/1 COLOUR CHANGE TRISTAR MASTER/SLAVE WIRING INSTRUCTIONS PDC/100/4 SLAVE MASTER SLAVE SLAVE Use LED RGB 4 Core cable (p67) Master unit may be located anywhere in wiring circuit web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 76

1 TRISTAR RGB colour changing stand-alone LED module TRISTAR REMOTE control for TRISTAR MASTER/SLAVE & TRISTAR RGB COLOUR CHANGE The exciting new TRISTAR contains the latest in colour changing LED technology. You can expect many years of reliable, maintenance free coloured light from this quality unit. It's so easy to use with a simple remote control unit. Designed to fit in to any 50mm MR16 down light housing, wall light, spike light, or ground light. A simple remote control unit offering four pre-set colour change programs and 16 fixed colour options along with adjustable dimming, makes the TRISTAR ideal for any setting. TRISTAR Standalone colourchange unit (will not work in unison with other TRISTARS) 1 000350/1 0001400/1 3 000555/1 4 0007059/1 5 00069/1 6 0007059/1 7 00069/1 50mm 5mm photometric data: TRISTAR RGB 77 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

3 GL030 + TRISTAR RGB colour changing groundlight The exciting new GL030/TRISTAR contains the latest in colour changing LED technology. It's made from the highest grade stainless steel and is contemporary in design making it ideal for prominent positioning. You can expect many years of reliable, maintenance free coloured light from this quality unit. It's so easy to use with a simple remote control unit. COLOUR CHANGE 4 WL00/TRISTAR MASTER 5 WL00/TRISTAR SLAVE colour changing wall light colour changing wall light 6 SL00/TRISTAR MASTER colour changing spikelight 7 SL00/TRISTAR SLAVE colour changing spikelight web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 78

1 RGBox colour change controller COLOUR CHANGE Simple colour change controller and power supply for Luxeon RGB colour changing LEDs (including DMX) Each unit will control up to 9 RGB sets (7 LED in total) Link together up to 5 units to control 45 Luxeon 1w RGB sets (135 LED total) Select 1 of hundreds of colours at the press of a switch, or choose to have a continuous colour change cycle Supplied with PLUG and PLAY lead for TRIFLOOD RGB (see opposite page) Operation using press to make switch: Press and hold for colour change and release at desired colour Short press for ON/OFF (comes on at same colour as when switched off) NB: If switched off at mains supply RGBox will come back on in the electronic off mode. Press and hold for 30 seconds for continuous colour change cycle (or ON/OFF switch instead of press to make) Input voltage: 190-60v 0.15A max (3w max) Output voltage: 3x 350mA Wire 3 series circuits (1 each red, blue and green) with coupled negative wire when using single LEDs 75mm 148mm 8mm 1 0004800/1 0003500/1 3 0000186/1 79 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

TRIFLOOD RGB colour change LED flood light photometric data: TRIFLOOD RGB 50mm 30mm COLOUR CHANGE Colour changing lighting is very much in demand. With Collingwood s TRIFLOOD RGB unit, whole rooms can change colour at the push of a button. This fitting is designed to simply fit in to any MR16, 50mm down light housing, (see pages 99-10) The clever unit combines light output from 3 Luxeon LED's, one red, one blue and one green, to create any colour of the rainbow in an instant! Each unit has a simple plug and plug connection, so installation is child's play. TRIFLOOD 3 LED RGB EXT. LEAD 1m extension lead for TRIFLOOD RGB Use in conjunction with RGBox for colour change lighting 3 high power 1w Luxeon LEDs (1 each red, green and blue) Supplied with 50mm cable and plug / socket for in and out leads (50mm cable total) Terminate final socket in line with blanking plug (supplied) to complete series circuit fig 1 fig Important: This product will be destroyed immediately if not use in conjunction with 350mA power supply. Do not use with constant voltage driver or transformer Simple extension for series circuit Use multiple extensions for longer lead requirements (fig1) Always complete the series circuit with blanking plug (supplied with RGBox, see fig ) web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 80

DMX COLOUR CHANGE 1 DMX C controller DMX I interface NEW Control up to 6 zones individually Set up to 4 scene/colour change programmes Power supply included Control up to 1440 RGB sets from just 1 DMX C dimensions: length 96mm width 98mm height 3mm DMX Interface for use with RGBox (LED power supply) Can be used with any DMX signal generator Wire up to 3 DMX I to DMX C dimensions: length 70mm width 70mm height 6mm 3 DMX C WM01 wall mounted simple DMX controller Three simple rotating knobs provide the control, the first selects a colour, the second operates the brightness, the third is clearly labelled giving twelve colour changing programmes, and even music activated light shows (sound to light) via it's integral microphone. The DMX C WB controller can truly provide professional lighting control in a format that is simply child's play Control up to 1440 RGB sets from just 1 DMX C WM01 dimensions: length (front panel).5mm This truly is an awesome product! A DMX controller with all the functionality, but incredibly easy to use! Ideal for controlling colour changing light in bars, (full depth) 47mm width 145mm height 85mm restaurants, lounges, function rooms and domestic applications. 81 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

DMX COLOUR CHANGE 1 0009999/1 0004999/1 3 0019500/1 NEW DMX WIRING INSTRUCTIONS CONTROL UP TO 1440 RGB SETS PER DMX C fig 5 fig 1 fig fig 8 fig 6 fig 3 fig 4 fig 7 fig 9 fig 1. DMX C fig. DMX I: Connect up to 3 to 1 DMX C fig 3. DMX CABLE: Use for all signal wiring fig 4. 10 OHM RESISTOR: Install onto final DMX I to complete signal fig 4. 10 OHM RESISTOR: circuit (supplied with DMX I) fig 5. RGBox: Connect up to 5 to 1 DMX I fig 6. LED RGB CABLE fig 7. DATA CABLE: (supplied with RGBox) fig 8. TRIFLOOD RGB: Connect up to 9 to 1 RGBox fig 9. LED RGB EXT. LEAD: Completes circuit web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 8

1 LEDTCH/3038 small x9 LED torch LEDTCH/1113A LED torch TORCHES 3038 1113A Quality LED hand torch with 9 radial LED Exclusive, designer water resistant Requires 3x AAA batteries (included) LED torch 10 torch display pack available (fig1) Shock resistant Requires 3x AAA batteries (included) Carry pouch included Battery life: 4 hrs 35mm 100mm 40mm 13mm 1 0000450/1 0001195/1 83 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

1 LEDTCH HDL1 RC rechargable LED headtorch LEDTCH/HD CLIP helmet clips for all head torches in our range TORCHES Water resistant 1w LED head torch Rechargable battery pack 3 digitally controlled light levels and flashing mode: 100% (3hr battery life) 50% (6hr battery life) 5% (9hr battery life) Flashing: (7hr battery life) Charge level indicator Charger supplied Helmet Clips For securing you LED headtorch to your hard helmet Comes in packs of 4 web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 1 0001995/1 000000/1 84

1 LEDTCH/HD LED/HAL LED/Halogen headtorch LEDTCH/HD CLIPS helmet clips for all head torches in our range TORCHES Water resistant dual lamp LED and Halogen lamp Requires 4x AA batteries (included) Battery life: 100 hrs (LED) Battery life:.5 hrs (Halogen) Helmet Clips For securing your LED headtorch to your hard helmet Comes in packs of 4 85 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095 1 0000500/1 000000/1

3 4 LEDTCH/HD L LED headtorch LEDTCH/HD CLIPS helmet clips for all head torches in our range TORCHES Neat, compact, light-weight water resistant 1w LED head torch Requires x Lithium batteries (included) Battery life: 8hrs Helmet Clips For securing you LED headtorch to your hard helmet Comes in packs of 4 web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 3 0001556/1 4 000000/1 86

POINT OF SALE DISPLAY 1 GL/05 groundlight decking display NEW GL/05 includes: 1x GL016 (p.07) GL/05 includes: 1x MS01/MF01 + WB/M 0 (p.8) GL/05 includes: 1x GL016 AB (p.07) GL/05 includes: 1x GL019 SPOT (p.11) GL/05 includes: 1x GL019 FLOOD (p.11) GL/05 includes: 1x GL030 + TRISTAR RGB (frosted glass) (p.78) GL/05 includes: 1x GL030/LED3 F (clear glass) (p.05) GL/05 includes: 1x GL030/LED3 S (frosted glass) (p.05) GL/05 includes: 1x SL030 (p.39) GL/05 includes: 1x ML0 (p.15) GL/05 includes: 1x ML01 (p.13) GL/05 includes: 1x WL00/TRISTAR (p.78) Our LED displays are constantly being GL/05 includes: 1x GL018 (p.09) updated to incorporate new and exciting LED GL/05 includes: 1x GL018T (p.10) products. This ensures you always stay one step GL/05 includes: 1x GL018 AB (p.09) ahead of the competition GL/05 includes: 1x TRISTAR REMOTE (p.77) Call our sales team: Customer visible wiring accessories +44(0)1604 495151 for the latest information 87 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095 1 00014900/1

CT/01 counter top perspex LED display POINT OF SALE DISPLAY CT/01 includes: 1x MS01/MF01 + WB/M 0 (p.7-8) CT/01 includes: 1x LED LYNX (p.31) CT/01 includes: 1x ML01 (p.13) CT/01 includes: 1x GL019 FLOOD (p.11) CT/01 includes: 1x ML0 (p.15) 340mm 00mm 10mm web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 00007999/1 88

POINT OF SALE DISPLAY 1 SAMPLE CASE 00 portable LED sample display case NEW Sample case includes: x ML03 (p.17) 1x ML01 (p.13) x ML0 (p.15) 5x LED LYNX (p.31-3) 1x GL030 + TRISTAR RGB (clear glass) (p.78) 1x GL030/LED F (clear glass) (p.05) 1x GL030/LED S (frosted glass) (p.05) 1x GL016 AB (p.07) 1x GL016 (p.07) x GL018 AB (p.09) 1x GL018T (p.10) x GL018 (p.09) 1x TRISTAR REMOTE (p.77) MF01/MS01 plus accessories (p.8-30) Wheels enable easy transport (frame detachable) 89 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095 1 0005000/1

DISPLAY DMX CASE portable DMX display POINT OF SALE DISPLAY Sample case includes: 1x DMX C (DMX controller, p.81) Sample case includes: 3x DMX I (DMX interface, p.81) Sample case includes: 1x PLDCC/350 1-4 (pwr supply, p.7) Sample case includes: 3x RGBox (clr change controller, p.79) Sample case includes: 3x TRIFLOOD RGB (LED flood unit, p.80) 3x LV107 (MR16 housing, p.101) DMX cable (p.67) LED RGB cable (p.67) Includes plug for straight to mains operation web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 0009900/1 90

1 GL007 MR16 adjustable 50w groundlight GL007 PL13 Symmetric groundlight BURIED UPLIGHTERS When you need an uplight for illuminating trees, buildings, statues etc, and you require quality, performance and durability, look no further than the Collingwood groundlight range. With toughened walk over safety glass, lamp and waterproof cable connector already installed, these robust products are the answer. Available in both symmetrical and asymmetrical, and from 50w to 150w output. MR16 PL13 Transformer included For electrical connection use H05RN-F rubber cable PG13.5 cable gland (extra gland supplied for through wiring) 185mm 180mm 45mm 5mm 10mm photometric data: GL007 MR16 straight photometric d GL007 MR16 angle photometric d GL007 PL13 91 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095 ** Cover ring only

3 GL008 MR16 adjustable x 50w groundlight 0mm 150mm Transformer included For electrical connection use H05RN-F rubber cable PG13.5 cable gland (extra gland supplied for through wiring) 1mm 310mm 350mm BURIED UPLIGHTERS photometric data: GL008 MR16 straight photometric d GL008 MR16 both to one side photometric d GL008 MR16 both pointing out photometric d 1 0005479/1 0004363/1 3 000704/1 web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 9

1 GL008 RX7 A asymmetric 70w metal halide groundlight GL008 RX7 S symmetric 70w metal halide groundlight BURIED UPLIGHTERS When you need an uplight for illuminating trees, buildings, statues etc, and you require quality, performance and durability, look no further than the Collingwood groundlight range. With toughened walk over safety glass, lamp and waterproof cable connector already installed, these robust products are the answer. Available in both symmetrical and asymmetrical, and from 50w to 150w output. RX7 A RX7 A Transformer included For electrical connection use H05RN-F rubber cable PG13.5 cable gland (extra gland supplied for through wiring) 0mm 1mm 350mm 310mm 150mm photometric data: GL008 RX7 A, X axis photometric d GL008 RX7 A, Y axis photometric d GL008 RX7 S ** Cover ring only 93 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095 1 0009944/1 000899/1

3 GL009 RX7 A 4 asymmetric 150w metal halide groundlight GL009 RX7 S symmetric 150w metal halide groundlight When you need an uplight for illuminating trees, buildings, statues etc, and you require quality, performance and durability, look no further than the Collingwood groundlight range. With toughened walk over safety glass, lamp and waterproof cable connector already installed, these robust products are the answer. Available in both symmetrical and asymmetrical, and from 50w to 150w output. BURIED UPLIGHTERS RX7 A RX7 A Transformer included For electrical connection use H05RN-F rubber cable PG13.5 cable gland (extra gland supplied for through wiring) 300mm 90mm 350mm 310mm 0mm photometric data: GL009 RX7 A, X axis photometric d GL009 RX7 A, Y axis photometric d GL009 RX7 S ** Cover ring only web: www.collingwoodlighting.com 3 0013191/1 email: sales@collingwoodgroup.com 4 001075/1 94

1 FL/01/HQI/70 70w floodlight FL/01/HQI/150 150w floodlight 3 LAMP/HQI RX7 70 70w lamp 4 LAMP/HQI RX7 150 150w lamp FLOODLIGHTS Collingwood offer a range of floodlights at competitive prices. Whether you require SON I or HQI, check Collingwood prices and quality first. FL/01 Metal halide flood light Steel bracket Glass panel Internal gear included Requires LAMP/HQI/RX7s 70-150w (not included, but are available) 39mm 84 photometric data: FL/01/HQI/70 X axis 49mm photometric d FL/01/HQI/70 Y axis photometric data: FL/01/HQI/150 X axis photometric d FL/01/HQI/150 Y axis 95 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

1 00035/1 000800/1 3 0000600/1 4 0000650/1 5 000137/ FLOODLIGHTS 5 FL/0/HPSI/70 70w floodlight HPS flood light Steel bracket Clear Polycarbonate cover Internal gear included Requires LAMP/SON I E7 70 with internal starter (not included, but are available, p.1) 65mm 65mm 350mm web: www.collingwoodlighting.com email: sales@collingwoodgroup.com photometric data: FL/0/HSPI/70 X axis photometric data: FL/0/HSPI/70 Y axis 96

1 BOL LOUV E7 BL loure style bollard head BOL LANT E7 BL lantern style bollard head BOLLARDS These classically designed, rugged bollards, offer you the LANT choice of either a lantern style top, or louvered style. There is also a choice of post height, from either 450mm or 1100mm depending on the application. A useful heavy duty-fixing bracket comes as standard, and ensures an easy installation. Heavy duty Powder coated steel bollard head LOUV 180mm Heavy duty Powder coated steel bollard head 50mm 180mm 50mm photometric data: BOL LOUV SONI photometric d BOL LANT SONI 97 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095 1 0003600/1 000400/1

3 BOL POST 1100 4 1100mm post for BOL LOUVRE/BOL LANT BOL POST 450 450mm post for BOL LOUVRE/BOL LANT BOLLARDS (fig1) 1100 450 Heavy duty powder coated bollard 8mm thick tube Bollard posts supplied with heavy duty concrete fixing brackets for simple secure fixing (fig1) 5 BOL GEAR 70w SON I 6 BOL GEAR 80w HG geartrays for bollards 180 10 850mm / 1100mm w/head 180mm 10mm 00mm / 450mm w/head Our bollard range came as standard with E7 lampholder (100w max) Convert to 70w SON I or 80w mercury with our add-on geartrays (special order only) web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 3 4 0001950/1 0001350/1 5 6 000100/1 000100/1 98

1 LV10 BS brushed steel downlighter housing WH white 3 CHR chrome LV DOWNLIGHTS 4 BR brass Whether cast aluminium or pressed steel, Collingwoods Low Voltage downlights range is sure to have a fitting to suit your needs. Fixed downlight 80mm 55mm 1 3 4 0000070/1 0000065/1 0000070/1 0000070/1 99 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

1 LV104 CHR chrome downlighter housing WH white 3 BR brass LV DOWNLIGHTS Whether cast aluminium or pressed steel, Collingwoods Low Voltage downlights range is sure to have a fitting to suit your needs. Eyeball style downlight 104mm 55mm 1 3 000017/1 000010/1 000017/1 web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 100

1 LV107 BS brushed steel cast aluminium downlighter housing WH white 3 CHR chrome LV DOWNLIGHTS Whether cast aluminium or pressed steel, Collingwoods Low Voltage downlights range is sure to have a fitting to suit your needs. Fixed downlight 81mm 55mm 1 3 0000160/1 0000140/1 0000160/1 101 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

1 LV109 BS brushed steel cast aluminium downlighter housing WH white 3 CHR chrome LV DOWNLIGHTS Whether cast aluminium or pressed steel, Collingwoods Low Voltage downlights range is sure to have a fitting to suit your needs. Gimbled downlight housing 10mm 5mm 1 3 000035/1 00008/1 000035/1 web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 10

1 GU10 BS brushed steel GU downlighter housing LV DOWNLIGHTS Mains voltage 50w max (lamp not supplied) Fixed downlight 80mm 148mm WH white 3 CHR chrome 4 BR brass 1 3 4 000019/1 0000118/1 000019/1 000019/1 5 GU104 BS brushed steel GU downlighter housing Mains voltage 50w max (lamp not supplied) Eyeball downlight 104mm 13mm 6 WH white 7 CHR chrome 8 BR brass 5 6 7 8 000018/1 0000150/1 000018/1 000018/1 103 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

1 GU109 BS brushed steel GU downlighter housing Mains voltage 50w max (lamp not supplied) Fixed downlight 105mm 148mm LV DOWNLIGHTS WH white 3 CHR chrome 4 BR brass web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 1 000010/1 0000167/1 3 4 000010/1 000010/1 104

1 C11 BS brushed steel C11 CHR chrome flush or surface mount low voltage light 3 C114 CHR chrome 4 C114 BS brushed steel wedge shaped undershelf light LV DOWNLIGHTS C11 C114 m cable, mini amp connector and 0w lamp supplied Wedge shaped mount for fitting under shelves 1m cable and mini amp connector supplied 68mm 9mm 130mm 40mm 1mm Use with transformers: SUN60, SKY160, ET00, LUNAR 105 (p13) 1 3 4 0000150/1 0000150/1 000099/1 000099/1 105 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

5 C113 LED undershelf lighting LV DOWNLIGHTS Plug and PLay simplicity x3 LED lights Each light has 7 superbright LEDs Brushed steel finish only 1.5m cable supplied 78mm 5mm 5 00038/1 web: www.collingwoodlighting.com email: sales@collingwoodgroup.com ** Cut-out for recess 106

1 WW/01/HQI 150 SI silver/grey WW/01/HQI 150 WH white large wall washer 3 LAMP/HQI RX7 150w 150w HQI lamp (p11) WALL WASHERS fig 1 Collingwood offer a range of top quality wall washers at competitive prices. You've the choice of 70 or 150w, round or oblong, white or silver finish, quality comes as standard. Special textured coating available in silver/grey and white (fig1) Gear trays sold separately (p.110) photometric data: WW/01/HQI X axis photometric data: WW/01/HQI Y axis 4mm 190mm 107 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

4 5 WW/0/HQI SI silver/grey WW/0/HQI WH white medium sized wall washer 6 LAMP/HQI G1 70w 70w G1 lamp (p1) WALL WASHERS fig 1 Special textured coating available in silver/grey (fig1) and white Gear trays sold separately (p.110) 1 00050/1 00050/1 3 0000650/1 4 5 6 0001584/1 0001584/1 0000800/1 17mm 150mm photometric data: WW/0/HQI 70 web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 108

1 WW/03/HQI/70 70w wallwasher 3 LAMP/HQI RX7 70w 70w lamp WW/03/HQI/150 150w wall washer 4 LAMP/HQI RX7 150w 150w lamp WALL WASHERS Collingwood offer a range of top quality wall washers at competitive prices. You have the choice of 70 or 150w, round or oblong, white or silver finish, quality comes as standard. Glass white powder coat finish Gear trays sold separately (p.110) 48mm 138mm 135mm photometric data: WW/03/HQI 70 X axis photometric data: WW/03/HQI 70 Y axis photometric data: WW/03/HQI 150 X axis photometric data: WW/03/HQI 150 Y axis 1 3 4 000070/1 000070/1 0000600/1 0000650/1 109 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

1 GT/HQI 70 70w metal halide geartray GT/HQI 150 150w metal halide geartray WALL WASHERS 8mm 164mm 8mm 18mm 76mm 76mm 1 0001310/1 000154/1 web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 110

1 SH/01/35 BS brushed steel downlighter housing WH white 3 CHR chrome BATHROOM 35w max 86mm 35mm 1 000095/1 000085/1 3 000095/1 4 0000895/1 111 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

BATHROOM 4 SSL/030 socket/shaver light Dual voltage: 110v/40v 60w filament lamp 495mm 70mm 60mm web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 11

SS/010 dual voltage shaver socket 1 SS/00 BS brushed steel flat plate dual voltage shaver socket BATHROOM Dual voltage: 110v/40v Internal reset: Over-load, Internal reset: Over heating Double wound isolating transformer 0va Complies with BSEN 655--5 and IEC 61558--5 Dual voltage: 110v/40v Internal reset: Over-load, Internal reset: Over heating Double wound isolating transformer 0va Complies with BSEN 655--5 and IEC 61558--5 accepts: American, Australian, Japanese, accepts: British and European shaver plugs accepts: American, Australian, Japanese, accepts: British and European shaver plugs 100mm 5mm 100mm 44mm 147mm 147mm 113 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095 1 0000396/1 0000670/1

3 KELVI LIGHT splash proof mirror light BATHROOM IP44 splash proof Energy saving fluorescent 4w PLL lamp (16x more efficient than incandescent bulb) Chrome finish with acrylic diffuser 650mm 4 DISPLAY BOARD splash proof display board 70 90mm 3 000350/1 4 0019900/1 Bathroom display board showcasing all our IP44 splash proof bathroom products web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 114

1 BARLIGHT 370 short splashproof barlight 370mm BATHROOM 1 000350/1 60 100mm Can be used vertically or horizontally 18w PLL light BARLIGHT 470 medium splashproof barlight 470mm 60 100mm 0003750/1 Can be used vertically or horizontally 4w PLL light 3 BARLIGHT 700 long splashproof barlight 700mm 60 100mm 3 0004750/1 Can be used vertically or horizontally 40w PLL light 115 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

1 CYLINDRA wall light Pull switch attached Use vertically and horizontally Back-plate sealed against water Chrome finish with hand blown glass diffuser 40w lamp BATHROOM 70mm 100mm 60mm MINARA DOUBLE double wall light Use vertically and horizontally Back-plate sealed against water Chrome finish with hand blown glass diffuser 40w G9 lamps 380mm 110mm 70mm web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 1 000750/1 000450/1 116

1 MINARA wall light 70mm 110mm BATHROOM Back-plate sealed against water G9 lamp supplied Chrome finish Hand blown glass diffuser 10mm 1 0001950/1 MONA wall light 110mm 130mm Cone version of MINARA G9 lamp supplied Chrome finish Hand blown glass diffuser 80mm 000450/1 3 NIVA wall light 70mm 100mm Cigar shaped version of MINARA G9 lamp supplied Chrome finish Hand blown glass diffuser 80mm 3 000450/1 117 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

1 GL018 T panel mount LED marker light GL019 T panel mount LED spotlight BATHROOM 1 0001940/1 000605/1 Sleek and stylish, The GL018 T features marine grade stainless steel, and is submersible in water down to 9 meters! The thread and nut makes this product simple to install into panels, spa baths, pools, water features and ponds. Powerful and stylish, The Luxeon LED powered GL019 T features marine grade stainless steel, and is submersible in water down to 9 metres! The thread and nut makes this product simple to install into panels, spa baths, pools, water features and ponds. GL018 T GL019 T As GL018 but with thread and nut As GL019 but with thread and nut Perfect for Spa baths 3m HO5-RN-F cable attached Perfect for Spa baths 1m 0.35mm red and black Teflon cable 36mm 37mm 3m 40mm 36mm 1.1m LED available in: WH BL Colour binning information & FAQ: ( see page 131-13) photometric data: GL019 T Use with power supplies: PLD 1-16 (dimming), PLU350 1-9, PLR 1-5, PLS 1- (p68) ** IP68 at 1bar ( 9m water ) ** If used in bathroom ZONE 0 or 1, it must be used in conjunction with suitable power supply ( see page 68) web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 118

1 LEP/10/13 low energy pendant LEP/E/10/13 6 low energy pendant LIGHTS\LAMPS LEP/10/13 LEP/E/10/13 6 Supplied with a 15.5mm pendant As LEP/10/13 but with 150mm cable drop For use in installations to comply with Free shade inverter part L of the building regulations For use with 10+13w 4pin low energy lamps 1 000150/1 0000875/1 119 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

1 LAMP/DICHROIC 50w 50w lamp 3 LAMP/DICHROIC 0w 0w lamp LAMP/DICHROIC 35w 35w lamp LIGHTS/LAMPS 50w/35w 0w UV filter glass front UV filter glass front 50mm 45mm 35mm 34mm Use with transformers: SUN60, SKY160, ET00, LUNAR 105 (p13) photometric data: LAMP/DICHROIC 50w photometric data: LAMP/DICHROIC 35w photometric data: LAMP/DICHROIC 0w 1 3 00000/100 00000/100 00000/100 web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 10

1 LAMP/GU10/7w COOL LAMP/GU10/7w WARM compact fluorescent lamps 3 LAMP/HQI RX7 70w 70w HQI lamp 4 LAMP/HQI RX7 150w 150w HQI lamp LIGHTS/LAMPS GU10 HQI RX7s 70w HQI RX7s 150w Compact fluorescent 7w GU10 (mains voltage) lamp RX7s Metal Halide lamp Life expectancy: 10,000hr Colour temp: 4000k 50mm 71.5mm Use 70w with: GL008 RX7s A (p.93) Use 70w with: GL008 RX7s S (p.93) Use 70w with: WW/03/HQI/70 (p.109) Use 70w with: FL/01/HQI/70 (p.95) Use 150w with: GL009 RX7s A (p.94) Use 150w with: GL009 RX7s S (p.94) Use 150w with: WW/01/HQI/150 (p.107) Use 150w with: FL/01/HQI/150 (p.95) 70w: 114mm / 150w: 13mm 0mm/ 3mm 1 0000366/1 0000366/1 3 0000600/1 4 0000650/1 11 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

3 LAMP/HQI G1 70w 70w G1 lamp 4 LAMP/SON I E7 70w 70w lamp LIGHTS/LAMPS G1 SON I E7 G1 Metal Halide lamp E7 high pressure sodium lamp Life expectancy: 5/8000hr Integral starter igniter Colour temp: 4000k Life expectancy: 18,000hr+ Use G1w with: WW/0/HQI (p.108) Use G1w with: FL/0/HPSI/70 (p.96) 103mm 150mm 3mm 68mm 3 4 0000800/1 000095/1 web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 1

1 SKY160 60Va thermal reset electronic transformer TRANSFORMERS Dimmable: Trailing edge Dimmable: Leading edge 50mm tails and screw terminals Terminal covers and cord restraint Suitable for independent mounting Protected against: Mains surge, Protected against: Short circuit, Protected against: Over-load (secondary side) Protected against: Over heating Soft start for prolonged life Suitable for fitting into small spaces and more adverse conditions, making it suitable for even to most arduous conditions Individual colour carton and wiring instructions technical data: Input voltage: 30-40v~50Hz Input current: 0.7A at 60w Rated power: 50VA 0-60w Output voltage: 11.6v~eff Power factor: 0.99 Ambient temp max: 50 C Case temp max: 85 C Thermal resetting fuse: 10 C RFI suppression in accordance with EN55015 Safety BSEN61046 Each unit is tested prior to you receiving it Branded available (min quantity 5000 pcs) 5 38mm 13mm 1 000304/50 0080/100 0061/300 0057/500 13 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

SUN60 60Va electronic dimmer TRANSFORMERS Dimmable: Trailing edge Dimmable: Leading edge 50mm tails and screw terminals Terminal covers and cord restraint Suitable for independent mounting Suitable for integration into luminaries Protected against: Mains surge, Protected against: Short circuit, Protected against: Over-load Thermal fuse to prevent damage in case of over-heating Soft start for prolonged life Individual colour carton and wiring instructions technical data: Input voltage: 30-40v~50Hz Input current: 0.7A at 60w Rated power: 50VA 0-60w Output voltage: 11.6v~eff Power factor: 0.99 Ambient temp max: 50 C Case temp max: 85 C RFI suppression in accordance with EN55015 Safety BSEN61046 Each unit is tested prior to you receiving it Branded available (min quantity 5000 pcs) 38mm 13mm 5 00049/50 0035/100 000/300 0005/500 web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 14

1 LUNAR 105 105Va electronic transformer SET80/FS 80Va electronic transformer 3 SET105/FS 105Va electronic transformer TRANSFORMERS LUNAR SET80/FS SET/105/FS Fully dimmable (leading and trailing edge) with most dimmers Protected against: Short circuit, Protected against: Over-load Each unit is tested prior to you receiving it Branded available (min quantity 5000 pcs) Electronic transformer with 6 way mini amp connector Dimmable (trailing edge) Protected against: Short circuit, Protected against: Over-load technical data: Input: 40v AC 0.44A Output: 11.6v 9.1A 35-105VA Ambient temp max: 50 C Case temp max: 85 C SET80/FS technical data: Input: 40v AC 0.33A Output: 11.6v 6.9A 0-80VA Ambient temp max: 50 C Case temp max: 60 C 38mm 13mm SET105/FS technical data: Input: 40v AC 0.44A 3mm Output: 11.6v 9.1A 0-105VA Ambient temp max: 50 C Case temp max: 75 C 49mm 165mm 0 1 3 0000419/1 0000645/1 0000671/1 15 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

3 ET00 00Va electronic transformer 4 SET105/D 105Va dimming electronic transformer TRANSFORMERS ET10 SET105/D Fully dimmable (trailing edge) technical data: Input: 40v AC 0.87A Output: 11.6v 17.5A 50-10VA Ambient temp max: 50 C Case temp max: 90 C 47mm 14mm Touch sensor dimming transformer Built in dimming circuit Dim by either touch sensor or press to make switch technical data: Input: 40v AC 0.44A Output: 0-11.6v 9.1A max 35-105VA Ambient temp max: 50 C Case temp max: 70 C 44 41mm 154mm 31 3 4 0001086/1 000111/1 web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 16

1 SET105/C w/proof 105Va electronic transformer TRANSFORMERS Fully dimmable (trailing edge) m moulded-on leads Protected against: Short circuit, Protected against: Over-load 08mm Thermal fuse 86mm 44mm technical data: Input: 40v AC 0.44A Output: 11.6v 9.1A Ambient temp max: 40 C Case temp max: 50 C JB1 PARALLEL waterproof junction box For parallel wiring of LED or low-voltage fittings 1 input, 1-3 outputs 4v, 150w max Use HO5RNF x 0.75 cable (p67) Cable diameter: 6.5-8.8mm Output mat be wired to additional JB1 for wiring multiple LED fittings 50mm 30mm A waterproof junction box for parallel wiring of low voltage lighting or specific types of LED's. Featuring 1 input and up to 3 outputs, the JB1 makes outdoor installations quick and easy. 1 0000880/1 0000418/1 17 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095 ** IP68 m max

1 BH/01/B 100 bulkhead light BH/01/B 100 Gray aluminium case Clear polycarbonate cover 10mm 40mm 98mm MISC. 3 BL/01/E7 40 WH white bricklight BL/01/E7 40 BL black bricklight BL/01/E7 40 Special coating available in white and black (fig1) Glass diffuser with aluminium grille 33mm 78mm 110mm fig 1 1 000037/1 000086/1 3 000086/1 web: www.collingwoodlighting.com email: sales@collingwoodgroup.com ** BH/01/B 100, BL/01/E7 40 18

CORE DRILLS concrete hole cutters FORSTNER BITS wood hole cutters HSS - HOLE SAWS large plaster board and wood hole cutters ACCESSORIES 1 CD/6.0/80 (ML01, ML0 and ML03) 6 WD/6.0 (ML01, ML0 and ML03) 10 WD/80.0 (GL030) Contents: Core drill, 4 TCT cutters. Contents: Forstner bit Contents: HSS Bi metal hole saw, Contents: SDS plus arbor M16, 8mm pilot drill Hole dia: 6mm Length: 90mm Variable pitch teeth Hole dia: 6mm Cutting depth: 80mm Adaptor for HSS hole saw (not SDS) Length: 100mm HSS pilot drill for hole saw 6.35 Hole dia: 79mm Length: 75mm CD/7.5/80 (GL018) 7 WD/8.0 (GL018) Contents: Core drill, 4 TCT cutters. Contents: Forstner bit Contents: SDS plus arbor M16, 8mm pilot drill Hole dia: 7.5mm Length: 90mm Hole dia: 7.5mm Cutting depth: 80mm Length: 100mm 3 CD/31.5/80 (GL019) 8 WD/3.0 (GL019) Contents: Core drill, 4 TCT cutters. Contents: Forstner bit Contents: SDS plus arbor M16, 8mm pilot drill Hole dia: 31.5mm Length: 90mm Hole dia: 31.5mm Cutting depth: 80mm Length: 100mm 4 CD/50.0/80 (GL016, GL01) 9 WD/50.0 (GL016, GL01) 5 Contents: Core drill, 4 TCT cutters. Contents: SDS plus arbor M16, 8mm pilot drill Hole dia: 50mm Cutting depth: 80mm Length: 100mm CD/80.0/80 (GL030) Contents: Core drill, 4 TCT cutters. Contents: SDS plus arbor M16, 8mm pilot drill Hole dia: 80mm Cutting depth: 80mm Length: 100mm Contents: Forstner bit Hole dia: 50mm Length: 90mm 1 3 4 5 6 7 8 9 0001347/1 0001488/1 0001590/1 0001875/1 000301/1 000034/1 00005/1 000088/1 000058/1 10 0001719/1 19 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

TBS thermal bonding system ACCESSORIES TBS (Thermal bonding system) is the ideal way to bond LED products to heat sinks. (heatsink not included) Image is for illustrative purposes only and is not a Collingwood product. 1 LED EP01 PACK mantained emergancy pack for 1w LEDs The new LED emergency pack from Collingwood is designed for use with high power 1w LEDs. The lighting times after mains power is halted make impressive reading and the simplicity of the Plug and Play system ensures a trouble free installation. Solve your emergency lighting problems the simple way with Voltage input: 30-40v 0hrs with 1 LED 3hrs with 6 LED 6hrs with 1 LED3 (p.57) 3hrs with LED3 (p.57) the LED EP01 web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 1 0018000/1 130

SERIES WIRING DIAGRAM wire high power LEDs in series WIRING INFORMATION Incorrect wiring of LEDs can result in irrepairable damage to the LEDs and power supply IMPORTANT INFORMATION: High power LEDs must be used in conjunction with constant current output power supply PLR, PLU, PLS, PLD or RGBox A maximum of 9 LEDs may be connected to one power supply (PLU/350 1-9) Always ensure that the temperature of the circuit board does not exceed 85ºC When wiring High power LEDs they must be wired in series and not in parallel GENERAL INSTRUCTIONS FOR WIRING OF LUXEON LEDS AND CONSTANT CURRENT POWER SUPPLIES: WARNING: LUXEON LEDs will be seriously damaged or destroyed by any of the following events: Not using a constant current LED driver Why? If you wire a LUXEON led to a conventional transformer or constant voltage LED driver, the LED will be destroyed. LUXEON LEDs are high power LEDs and must be run on constant current. Each LED requires supplying with a different voltage in order to be fed with a 350 ma or 700 ma constant current. For this reason they must be wired in series. Connecting the power supply to the mains supply before connecting to the LED Why? Constant current power supplies will ramp up to their maximum voltage in the event of an open circuit. When the LED is then connected they are being connected to a massive over-voltage. If the power supply has been connected to the mains supply with an open circuit, ensure the output terminals are short circuited to discharge the power supply internal capacitors before connecting any LEDs. Cont. on next page 131 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

cont. from previous page Switching the LED on the low voltage side of the power supply Why? For the same reasons as previous question. Not having proper thermal control for the LED Why? The LUXEON LED is a high power LED. It has a small core where the light is produced. This core gets hot very quickly. Overheating of LED will severely shorten the life of the LED, and reduce light output. It is therefore necessary to ensure proper thermal design of all LED applications to ensure that the heat is removed from the core of the LED and dissipated elsewhere. FAQ Why do the colour of LEDs vary so much? (colour binning) Unfortunately because Luxeon LED are at the cutting edge of technology and LED production, the colour temperature of the Luxeon LED cannot be guaranteed. Although Luxeon do currently grade LEDs into colour bins the colour variation within these bins is still significant to the human eye. When designing schemes using Luxeon LED, it is important that they should be designed to not be sensitive to the colour temperature of the LED s light. WIRING INFORMATION Why must LUXEON LEDs be wired in series? To achieve the same current throughout a circuit, it is necessary to wire in series. Circuits wired in Parallel will have a constant Voltage, and circuits wired in Series will have a constant current for all components in the circuit. What voltage do the LUXEON LEDs run on? There is no answer to this question, except somewhere between and 4 volts. Every LUXEON LED requires a different voltage but a constant current. What is the output voltage of the constant current drivers? The output voltage varies depending on how many LED are wired into the series circuit. The more LEDs wired into the circuit, the higher the voltage. What is the maximum voltage of the Constant Current drivers? Each driver has it s own maximum voltage, but all Collingwood drivers have a maximum voltage of below 50V DC ie Safety Extra Low Voltage. Can LUXEON LEDs be used in bathrooms and swimming pools? Yes, (assuming the enclosure has appropriate IP rating) but always bear in mind the maximum voltage of the driver in the event of an open circuit. Be careful when selecting the driver. Certain areas of bathrooms and swimming pools have maximum voltage requirements of less than normal Safety Extra Low Voltage eg, bathroom Zone 1, max voltage 30 V DC this means that PLR and PLS could be used, but PLU or PLK could not. Can LUXEON LEDs be used in saunas? Yes and No. All equipment installed in sauna areas C and D must be suitable for ambient temperature of 15 degrees centigrade. As with Bathroom areas, Saunas have specific voltage requirements. If an LED is run constantly at high temperature it s life and light output will be severely limited. Only fit LED products where the temperature of the LED can be effectively controlled. web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 13

MANAGEMNET FIELD SALES NORTH Justin Maeers managing director James Morrison deputy MD / product development Mark Halton european sales director mobile: +44 (0)7970 15301 Adam Garside uk sales manager mobile: 07967 64498 Dan Roberston area representative (North East) mobile: 07950 659131 Danielle Ingram area representative (North West) mobile: 07789 957891 Bruce Nelson area sales agent (S Scotland) mobile: 07973 634797 Graeme Twaddle area sales agent (N Scotland) mobile: 07958 53363 FIELD SALES SOUTH Graham Bradley-Stevenson area representative (NE Midlands) mobile: 07776 13947 Tony Cox area sales agent (S London & SE) mobile: 0780 8988 Sarita Sharp area representative (E Midlands) mobile: 0793 940797 Colin White area representative (S West) mobile: 07960 08435 ACCOUNTS 68 Christine Knight area sales agent (N London & E Anglia) mobile: 07710 38798 Rebekah Reynolds sales ledger email: rebekah@collingwoodgroup.com Debra Maeers credit control direct line: 01604 495151 133 tel: +44 (0)1604 495151 fax: +44 (0)1604 495095

TELE SALES TELE SALES OPERATIONS Debbie Andrew internal sales supervisor direct line: 01604 490615 Kerry Watson direct line: 01604 490614 Brenda Tebby traditional sales direct line: 01604 490619 Lisa Halton direct line: 01604 4906 Dawn Travell direct line: 01604 490607 Helen Andrews direct line: 01604 49060 TECH SUPPORT Joanne Blanks direct line: 01604 49063 Jo Dudley-Cave direct line: 01604 490608 Patrick Hopkins technical support direct line: 01604 495151 Tim McCrossan direct line: 01604 49067 Darren Watts direct line: 01604 49061 68 Andy Maloney purchasing manager direct line: 01604 49060 Warehouse team web: www.collingwoodlighting.com email: sales@collingwoodgroup.com 134

Collingwood brooklands house sywell aerodrome sywell northants NN6 0BT tel: (0)1604 495151 fax: (0)1604 495095 email: sales@collingwoodgroup.com web: www.collingwoodlighting.com