E2 micro Selection Table. E2 micro Introduction Advantages. E2 micro - one-piece e-chains One-piece, non snap-open

Similar documents
easy chain zipper system E2 E2 e-tubes system E4 igus e-chainsystems clean room universal and modular

igus e-chainsystems universal and modular

Series 17 Introduction

Light, highly flexible and low-vibration

Series 09 Introduction

E2 mini Series 10 Introduction

E2 e-tubes. Protection against dirt and debris 6.0

E6 Series E6.52 R6.52 Delivery program Extremely low-noise, minimum vibration, medium size

E2 mini Series 14 Introduction

igus System E6 extremely low-noise, minimum vibration and abrasion, cleanroom suitable

easy chain Series E26 Z26

E2/

E2/000 Series

easy chain Series E200 Z200

Energy Chain System E2 Medium Series 200/240/250

E2 Medium - E-Chains with 2-part link design for a wide range of applications

Energy Chain Systems E2 medium

Universal applications for igus Energy Chains

Quick, zipper-like installation

E4.1 Series E4.56 Introduction

07) D-US SYSTEM E4 204S :57 Uhr Seite

Energy Chain system E4-1 Series E4-56/H4-56/R4-56

02A)-D-EU-IT-TRIFLEX SOLO- G :25 Uhr Seite 30 for 3D-applications easy triflex 2.30

02)-D-EU-TWISTER-KOMPLETT- G :04 Uhr Seite

igus TwisterChain NEW Second Generation: robust, low-noise, for high loads

.e.chain ../ / ystems. ...e.chains /readychain.complete system/

Caring for cables. Types of installation

Energy Chain Systems Triflex R Energy Tubes

KP35 series VARIABLE INNER DISTRIBUTION QUICK AND EASY TO OPEN ROBUST ALL-ROUNDER

Selection BASIC LINE BASIC LINEPLUS

guide trough systems aluminium SuperTrough steel guide trough support tray guidefast guidelite tubular trough snap-in trough

MONO series. Cable carriers for standard applications. Subject to change.

QUICKTRAX Specifications are subject to change without notice. KSA-0810-GC

MultiLine MP 44. System overview. 1 Chain bracket. 2 Shelving system. Chain bracket angle. Separator TR. Chain bracket U-part

MONO series. Cable carriers for standard applications. Subject to change.

xirodur B180 Axial Ball Bearings Product Range

guide trough systems aluminum, steel and other troughs

MultiLine MP 35. System overview. 1 Chain bracket. 2 Shelving system. Chain bracket angle. Separator TR. Chain bracket U-part. H-shaped shelf unit RE

XLT series. Tubes with variable cable carrier widths. Subject to change.

UNIFLEX Advanced Specifications are subject to change without notice. KSA-0810-GC

CABLE DRAG CHAIN SYSTEMS MP 36 G

MultiLine MP 36G. System overview. 1 Chain bracket. 2 Shelving system. Chain bracket U-part. Separator TR. End brackets flange

CABLE DRAG CHAIN SYSTEMS

Selection BASIC LINE BASIC LINE PLUS VARIO LINE SERIES TUBE LINE

Cable drag chain systems

Cable drag chain systems MP 3000

XL series. Cable carrier with large inside height. Subject to change.

VARITRAK LS/LSX SIMPLE Stroke system is integrated in the chain link plate no additional bolts are needed

Specifications are subject to change without notice. KSA-L15015-GC

NIFLEX Advanced series PLASTIC CABLE CARRIERS UNIVERSAL AND WITH MANY VARIANTS WITH BALL JOINT

Selection BASIC LINE BASIC LINE PLUS VARIO LINE SERIES TUBE LINE STEEL LINE

Cable drag chain systems MP 32

Cable drag chain systems MP 35

Cable drag chain systems MP 25G

02A)-D-EU-IT-TRIFLEX SOLO- G :24 Uhr Seite 4 R -robotic e-chains 3D triflex 2.4

triflex R Series TRE Easy to fill

Data sheet chainflex CFSOFT1

Selection BASIC LINE BASIC LINE PLUS VARIO LINE

Data sheet chainflex CF6

Data sheet chainflex CF140.UL

Data sheet chainflex CF130.UL

Cable drag chain systems

Data sheet chainflex CF10

Selection BASIC LINE BASIC LINE PLUS VARIO LINE SERIES TUBE LINE

The Separator arrangements depend on the application (see order example or separator options).

Hahn Serie 60 AT. Universal hinge for versatile application. More modern look Improved technology

9.96. guidelok horizontal

igubal Pressfit Spherical Bearings Easy to fit Extremely cost-effective Chemical-resistant Light weight High strength

Data sheet chainflex CF5

Nylon Cable Chains Light Series

Contents. EasyLine EFK MultiLine EFK 14. MultiLine EFK MultiLine EFK MultiLine EFK 35. MultiLine EFK page 201.

CABLE DRAG CHAIN SYSTEMS

Data sheet chainflex CF9

Deep-Groove Ball Bearings, Axial, Multi-Axis, Shields and More... ..plastics

SLE SLE CHARACTERISTICS. Travel. Travel speed. Acceleration. Temperature. Special types. closed + open. application fields SLE

Data sheet chainflex CF8821

Cable drag chain systems

Warehousing...Distribution Centers... Logistics. andling. plastics for longer life ECS-B12

S/SX Tubes series Extremely robust and sturdy covered steel cable carriers

Cable drag chain systems MP 41.2, MP 41.3

Cable drag chain systems MP 35.1, MP 35.2

HelaGuard. Non-Metallic Conduit & Fittings

igubal Pressfit Spherical Bearings Easy to fit Extremely cost-effective Chemical-resistant Light weight High strength

Selection BASIC LINE BASIC LINE PLUS VARIO LINE

Specifications are subject to change without notice. KSA-L15015-GC-A

PLE PLE CHARACTERISTICS. Travel. Travel speed. Acceleration. Temperature. Special versions APPLICATION AREAS. PLE max.

the power to innovate Steel cable carriers Subject to change.

Cable Management Solutions. HelaGuard. Non-Metallic Conduits and Fittings

ROBOTRAX System. Cable carrier for 3D movements. Subject to change.

Data sheet chainflex CF886

drylin N Low-Profile Guide Systems

tensioning systems 107

Chain and Belt Tensioning Systems

Data sheet chainflex CF240

PLE PLE CHARACTERISTICS. Travel. Travel speed. Acceleration. Temperature. Special versions APPLICATION AREAS. PLE max.

14 HH EAC/CTP CE RoHS-II conform

ROTARY TABLES SERIE TC TECHNOLOGY THAT INSPIRES

The right chain! High Performance from Rexnord. Rotary chains. MODULE_04/GB/2014/03 // No liability accepted for misprints or errors!

Selection BASIC LINE BASIC LINEPLUS VARIO LINE SERIES TUBE

Data sheet chainflex CF210.UL

Transcription:

E micro Introduction dvantages E micro election Table Universal: Mounting bracket with strain relief option, quickflange optionally table: Large, assembly-friendly pins for long unsupported lengths Cable friendly: Very smooth contours ensure the best possible cable life Variety of options: Non snap-open or snap-open on the inner or outer radius Cost-effective: Very lightweight, low price Robust: quare stop dog system for large fill weights (E micro "next generation") Low noise: Installed "brake" reduces noise (E micro "next generation") mallest inner heights and bending radii - E micro E micro e-chains are very small, one-piece and two-piece e-chains with low weight, making them ideal for highly dynamic applications. E micro e-chains are optimal for smallest installation spaces, and are available in many versions. The "next generation" of E micro e-chains offers a robust square stop dog system and up to % longer unsupported lengths as well as % more fill weight at % lower weight (comparison to similar igus e-chains ). n e-chain -opener is included with every series E.1. Many accessories like interior separation elements and fixation options are available. Typical industries and applications Models (micro e-chains ) utomatic doors Vehicles Measuring machines Electric equipment Pick and place robots General machinery if product design award 1989 igus eries eries Inner height Inner width Outer width Outer height ending radius Unsupported Page hi ha R length [m], - 8,7-1,7 8, - 8, 7, 7-1, -,, 1-8,, 6-6, - 68, 1, 18-8,, 6-6 1, - 7, 1, 18-8, 6 1), 6-6 1, - 71, 1, 18-8,6 EC.,6 6-1, - 7, 1, 18-8,7 EC.1 1,9-17,8-7,8 19, 8-7 1, 8 ) 1, - 18, - 8, 19, - 8 1, Ei.,1 6-1, - 7, 1, 18-8,7 7 **,9 16, 1, 18-8, 9 ** 1, 18, 19, 8-8 1, Ei.1 1, - 17,8-7,8 19, 8-7 1, ** One-piece, snap-open along inner radius with film-hinge E micro - one-piece e-chains One-piece, non snap-open 6 6 E micro - one-piece ** and two-piece e-chains nap-open along inner radius 6 8 Cleanroom test upon request E micro - two-piece e-chains nap-open along outer radi n e-chain opener is included with every eries E. and E.1 that can be opened, which significantly reduces installation time UL9-V classification - for eries, 7, 9 (UL9-V upon request) Electrically conductive ED/TEX versions several eries available from stock E.,1 6-1, - 7, 1, 18-8,7 7 ), 16 -, - 7, 1, 18-8, 9 ) 1, 16 -, - 8, 19, 8-8 1, E.1 1, - 17,8-7,8 19, 8-7 1, 8 For new designs we recommend E micro "next generation" eries: 1) EC., ) EC.1, ) E., ) E.1 16 D-CD files, configurators, PDF www.igus.eu/emicro 17

E micro Technical Data Overview Technical Data E micro Order keys and Options Options with order keys based on eries E. Gliding speed / acceleration (maximum) [m/s] / [m/s ] peed / acceleration [m/s] / [m/s ] tandard NC-Version - (no camber) without pretension Reverse bending radius for circular movements ED / TEX classified e-chains II GD FL peed / acceleration FL [m/s] / 6 [m/s ] Part No. tandard Part No. NC-Version Part No. RR Part No. ED-Material Material - permitted temperature C, igumid G - up to +1 C NC Material - permitted temperature C, igumid N (only eries, 7, 9) - up to +8 C Material lower part - permitted temperature C, igumid G (only eries 7, 9) - up to +1 C E...R. e-chain snap-open along outer radius E...R..NC e-chain snap-open along outer radius E...R1/R. e-chain snap-open along outer radius E...R..ED e-chain snap-open along outer radius Material crossbar- permitted temperature C, igumid N (only eries 7, 9) - up to +8 C Ei...R. Ei...R..NC Ei...R1/R. Ei...R..ED Flammability class: igumid G = VDE IIC UL9- / igumid N = VDE IIC UL9-V e-chain snap-open along inner radius e-chain snap-open along inner radius e-chain snap-open along inner radius e-chain snap-open along inner radius = with straight upper run FL = with permitted sag EC...R. EC...R..NC EC...R1/R. EC...R..ED One-piece, non snap-open One-piece, non snap-open One-piece, non snap-open One-piece, non snap-open Installation methods overview, maximum travels Delivery from stock Delivery time: upon request Delivery time: upon request Delivery time: everal series from stock e-chain eries Unsupported application Vertical hanging Vertical standing ide mounted unsupported Rotary application Zig-zag application, m, m, m, m 7 ), m 6 1),6 m EC./Ei./E.,7 m 7, m 9 1, m 9 ) 1, m EC.1/Ei.1/E.1 1, m 8 ) 1, m upon request upon request upon request with rework upon request upon request upon request upon request with rework upon request upon request upon request upon request with rework upon request upon request upon request upon request with rework upon request upon request upon request upon request with rework upon request upon request upon request upon request with rework upon request upon request upon request upon request with rework upon request upon request upon request upon request with rework upon request upon request upon request upon request with rework upon request upon request upon request upon request with rework upon request upon request upon request upon request with rework upon request upon request upon request upon request with rework upon request Order example Order key and colour options based on eries E. Order example for complete e-chain eries E. (1, m), colour black, with mounting brackets and interior separation: e-chain (1, m) Please indicate e-chain length or number of links: 1, m or links + Mounting brackets 1 set (+ ) + Interior separation with separators assembled every nd link Order text: 1, m E...R. + E...PZ + x E...1 Order key e-chain snap-open along outer radius e-chain snap-open along inner radius One-piece, non snap-open eries / Type index (depends on ) ending radius R Colour index (standard black) E...R. Ei...R. EC...R. lack e-chains available from stock! Delivery time for special colours: upon request E...R. E...PZ E...1 General igus colour options for e-chains and e-tubes Colours Order index Colours Order index lack tandard, from stock!. White for e-chains.1 /e-tubes late grey only ED material.ed Grey white for e-chains.1 /e-tubes Grey brown only T material.t Orange for e-chains. /e-tubes Grey only for e-chains. Yellow. for e-chains /e-tubes Dusty grey only for e-tubes.1 Light grey e-chains.1 /e-tubes For new designs we recommend E micro "next generation" eries: 1) EC., ) EC.1, ) E., ) E.1 18 D-CD files, configurators, PDF www.igus.eu/emicro 19

E micro eries Product range mallest applications E micro eries ccessories Mounting brackets, polymer one-piece pivoting...1z 1 1...Z 6 eries One-piece, non snap-open e-chain Mounting bracket dapter plate..qf e-chain non snap-open..r.. 7.R...R. 7 8,7,7 1,7 R ending radii 1 1 18 8 1 1 18 8 1 1 18 8 Weight,,,6...7... Part No. full set.. 1Z.7. 1Z.. 1Z Dim. 8,7,7 1,7 upplement Part No. with required radius (R). Example:..8. Dimensions Fill weight 1..7., 8 Inner height mm Pitch mm/link Links/m ( mm) Chain length / dditional Features Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index or... 1Z must be indicated on preassembled configurations Full set. FL...7 1. Unsupported length / FL [m] Length of travel [m]. 1. 1.. R D / R 1 1 18 8 8 8 6 D 9 1 7 7 K 6 7 8 1 The required clearance height: F = + mm (with,1 kg/m fill weight) 17 1 8-8 F = + ø +.1 ø +.1 6 dapter plate for rapid installation: for all sizes of Part No...QF The adapter has broken edges so that it can be adapted to the respective e-chain width. It is not absolutely necessary when attaching the mounting brackets. The mounting brackets can also be screwed on without the adapter plate. D-CD files, configurators, PDF www.igus.eu/ 1

E micro eries Product range Low weight 7 E micro eries ccessories Mounting brackets, polymer one-piece pivoting More features www.igus.eu/...1(pz) 17 1 17...(PZ) ø 8 8 C 1, eries One-piece, non snap-open e-chain.7 -.. /.. e-chain non snap-open R ending radii Weight with without Dim. Dim. Dim. C..... 7.R..R. 16.R..R..R. 7 16 1 1 1 1 18 8 8 8 1 18 8 8 8 1 18 8 8 8 1 18 8 8 8 1 18 8 8 8,7,8,9,,11.7....16......7.1PZ..1PZ.16.1PZ..1PZ..1PZ.7.1..1.16.1..1..1 1 1 1 1 1 upplement Part No. with required radius (R). Example:..8. Drilling pattern for Part No.:.7 -.. center bores only /.. outer bores only (see figure above) Dimensions Fill weight 1..7., 7 Inner height 7 mm Pitch 16,7 mm/link Links/m 6 ( mm) Chain length / Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index or..7. 1 PZ must be indicated on preassembled configurations Full set. FL...7 1. Unsupported length / FL [m] Length of travel [m]. 1. 1.. D / 19 R 16,7 1 - F = + R 1 18 8 8 8 6 66 86 6 D 8 8 68 78 K 8 9 1 1 18 The required clearance height: F = + mm (with,1 kg/m fill weight) D-CD files, configurators, PDF www.igus.eu/

E micro eries Product range Low weight, high dynamics, cost-effective E micro eries ccessories Mounting brackets, polymer one-piece one side pivoting...1 8 8...) t = 1 t = 1 eries One-piece, non snap-open e-chain.6. -.. /.. -.6. e-chain non snap-open. 6.R...R.. 16.R...R...R.. 6.R. 6 16 6 1 68 R ending radii 18 8 8 18 8 8 18 8 8 18 8 8 18 8 8 18 8 8 Weight,6,7,7,8,9,19.6....16......6. Part No. full set.6.1..1.16.1..1..1.6.1 Dim. 6 Dim.,7 1,7,7,7,7 68,7 upplement Part No. with required radius (R). Example:..8. Drilling pattern for Part No.:.6 -.. center bores only /. -.6. outer bores only (see figure above) Dimensions Fill weight 1..7. 8, 1 Inner height mm Pitch mm/link Links/m ( mm) Chain length / 1 Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index 1...... 1 1 must be indicated on preassembled configurations Full set. FL.. Unsupported length / FL [m].7 1. Length of travel [m]. 1. 1.. D R / 1-1 F = + R 18 8 8 8 68 88 D 6 7 K 1 16 The required clearance height: F = + mm (with, kg/m fill weight) D-CD files, configurators, PDF www.igus.eu/

E micro eries Product range Very small pitch, smooth running, E micro eries ccessories Mounting brackets, polymer one-piece one side pivoting...1(pz) 17 18, 18,...(PZ) ø 6/ 8 8 C eries One-piece, non snap-open e-chain.6.. /. -.6 e-chain non snap-open. 6.R...R.. 16.R...R...R.. 6.R. 6 16 6 1 16 6 6 7 R ending radii 18 8 8 8* 18 8 8 8* 18 8 8 8* 18 8 8 8 18 8 8 8* 18 8 8 8* *Radius 8 only for eries. - for other widths available upon request, please consult igus for delivery time upplement Part No. with required radius (R). Example:..8. Weight,9,,11,1,16,19 with without Dim..6....16......6..6.1PZ..1PZ.16.1PZ..1PZ..1PZ.6.1PZ.6.1..1.16.1..1..1.6.1 6 1 16 6 6 7 1 1 6 Mounting bracket with strain relief tiewrap plate has reductions of ø mm / ø 6 mm,. Mounting bracket without strain relief tiewrap plate only has holes of ø mm. Drilling pattern for Part No.:.6 -.. center bores only /.. -.6. outer bores only (see figure above) Dim. Dim. C Dimensions Fill weight 1..7. 8,, 1, Inner height, mm Pitch 1 mm/link Links/m 77 (1 mm) Chain length / Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index or... 1 PZ must be indicated on preassembled configurations Full set. FL D /...7 1. Unsupported length / FL [m] Length of travel [m]. 1. 1.. R + 1, 1, - 1, F = + R 18 8 8 8* 8, 68, 88, 178, D 6 9 K 8 11 1 9 The required clearance height: F = + mm (with, kg/m fill weight) *Radius 8 only for eries. - for other widths available upon request, please consult igus for delivery time 6 D-CD files, configurators, PDF www.igus.eu/ 7

7 E micro eries 7 Product range nap-open along outer radius, cost-effective For new designs we recommend E micro "next generation": eries E., E micro eries 7 ccessories Mounting brackets, polymer one-piece locking More features 7 www.igus.eu/7 6...1(PZ) 17 8 8 6...(PZ),8/,8/,, eries 7 Two-piece link design, snap-open along outer radius 6.16. - 6.. / 6.. - 6.. nap-open along outer radius R ending radii Weight with without Dim. Dim. 7. 16.R. 7..R. 7..R. 7..R. 16, 7 7 7 18 8 8 18 8 8 18 8 8 18 8 8,16,17,,.16....... 6.16. 1PZ 6.. 1PZ 6.. 1PZ 6.. 1PZ 6.16. 1 6.. 1 6.. 1 6.. 1, 7, 7, 7, upplement Part No. with required radius (R). Example: 7..8. Drilling pattern for Part No.: 6.16. - 6.. center bores only / 6.. - 6.. outer bores only (see figure above) Dimensions Fill weight 1..7. 8,, 1 Inner height, mm Pitch mm/link Links/m ( mm) Chain length / 1 Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index 1.... 6.. 1 PZ 1 must be indicated on preassembled configurations Full set. FL / D...7 1. Unsupported length / FL [m] Length of travel [m]. 1. 1.. R + 1-1 F = + R 18 8 8 1 71 91 D 6 66 76 K 1 16 The required clearance height: F = + mm (with, kg/m fill weight) 8 D-CD files, configurators, PDF www.igus.eu/7 9

6 E micro eries 6 Product range Low weight, high dynamics For new designs we recommend E micro "next generation": eries EC., E micro eries 6 ccessories Mounting brackets, polymer one-piece locking More features www.igus.eu/6 6 6...1(PZ) 17 8 8 6...(PZ),8/,8/,, eries 6 One-piece, non snap-open e-chain 6.6. - 6.. / 6.. - 6.6. e-chain non snap-open 6. 6.R. 6..R. 6. 16.R. 6..R. 6..R. 6..R. 6..R. 6. 6.R. 6 16 6 1, 16,, 7 7 7 7 71 R ending radii 18 8 8 18 8 8 18 8 8 18 8 8 18 8 8 18 8 8 18 8 8 18 8 8 upplement Part No. with required radius (R). Example: 6..8. Weight,1,1,16,17,,,6, with without Dim..6....16..........6. 6.6.1PZ 6..1PZ 6.16.1PZ 6..1PZ 6..1PZ 6..1PZ 6..1PZ 6.6.1PZ 6.6.1 6..1 6.16.1 6..1 6..1 6..1 6..1 6.6.1 6 1, 16,, 7, 7, 7, 7, 71, 1 1 6 Drilling pattern for Part No.: 6.6. - 6.. center bores only / 6.. - 6.6. outer bores only (see figure above) Dim. Dimensions Fill weight 1..7. 8,, 1 Inner height, mm Pitch mm/link Links/m ( mm) Chain length / 1 Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index 1.... 6.. 1 PZ 1 must be indicated on preassembled configurations Full set. FL / D...7 1. Unsupported length / FL [m] Length of travel [m]. 1. 1.. R + 1-1 F = + R 18 8 8 1 71 91 D 6 66 76 K 1 16 The required clearance height: F = + mm (with, kg/m fill weight) D-CD files, configurators, PDF www.igus.eu/6 1

E. Ei. EC. E micro eries E. Product range Next generation, stable, low noise, fast opening,1,1,6 E. Ei. EC. E micro eries E. ccessories Mounting brackets, polymer one-piece one side* or two side pivoting locking E. Ei. EC....E....Ei....EC. E...PZ two side pivoting E...PZ E...PZ one side* pivoting E...6PZ E...1PZ locking E...PZ 1, 8 8 eries E. nap-open along outer radius from both sides tandard eries Ei. nap-open along inner radius from both sides eries EC. One-piece, non snap-open e-chain nap-open along outer radius E.. 6.R. E...R. E.. 16.R. E...R. E...R. E...R. E...R. Ei.. 6.R. Ei...R. Ei.. 16.R. Ei...R. Ei...R. Ei...R. Ei...R. EC.. 6.R. EC...R. EC.. 16.R. EC...R. EC...R. EC...R. EC...R. 1) ED/TEX version available from stock. 1. 1.. nap-open along inner radius FL One-piece, non snapopen. 1. Unsupported length / FL [m] 1.. Length of travel [m] 1.... 6 16 8, R 18 8 8 1 71 91 D 6 66 76 K 1 16 The required clearance height: F = + mm (with, kg/m fill weight) R D 1, 17,, 7, 7, 7, 7, upplement Part No. with required radius (R). Example: E...8. Dimensions Fill weight R ending radii 18 8 8 18 8 8 18 8 8 18 8 8 18 8 8 18 8 8 18 8 8,1/,6 1 / E.,1,1,16,17,19,, Ei.,1,1,16,17,19,, 1, 1-1 EC.,1,1,16,17,,, Inner height E.,1 mm Ei.,1 mm EC.,6 mm Pitch mm/link Links/m ( mm) Chain length / F = + 6.. 16...... 1, 1,, E..6.PZ E...PZ E..16.PZ E...PZ E...PZ E...PZ E...PZ E..6. - E... 18 18 with two side pivoting E... - E... E..6.6PZ E...6PZ E..16.6PZ E...6PZ E...6PZ E...6PZ E...6PZ, with one side* pivoting Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index 1.... with locking E..6.1PZ E...1PZ E..16.1PZ E...1PZ E...1PZ E...1PZ E...1PZ dditional Features The quick flange can be clipped-in laterally in all mounting brackets. ousing for hexagonal nut or cylinder head screws M. ingle: Part No. E.1.QF / incl. mounting braket Part No. E...PZQF Dim. E...PZ1 + 1 + 67, 67, Dim. 1, 17,, 7, 7, 7, 7, 67, 67, * One side pivoting: Pivot angle = bending radius. One side pivoting only to the inner radius - whether mounted to 1 to! ø, 7, 1 1 must be indicated on preassembled configurations Full set ED/TEX permanently conductive e-chains - everal widths with delivery from stock: Inner widths 16 -, radii R 18-8. Full ED product range www.igus.eu/ed D-CD files, configurators, PDF www.igus.eu/e.

E. Ei. EC. E micro eries E. ccessories Interior separation New generation E micro eries E. ccessories ssembly tools ave assembly time E. Ei. EC. E. Ei.,1 EC.,6, ave assembly time - Interior separation assembly tool for the E micro "next generation" Convenient insertion of separators and shelves ignificant assembly time reduction Grip and mount can be ordered separately and are easy to change More information www.igus.eu/e.1open 1, 1, E...1 E...1 unassembled E.. assembled E...1 unassembled E.. assembled E...1 E...1 E...1 Note EC.: For one-piece, non snap-open please assemble the interior separation before fitting the e-chain! s standard separators are assembled every nd e-chain link. tandard separator, for e-chains Notch separator for notch crossbar tandard - for any application For a simple vertical subdivision on e-chains. eparators can be arranged anywhere in the e-chain cross section. No snap-in option, freely movable. Locks safely onto in, mm increments For exact positioning in e-chains. Recommended for sidemounted applications. brasion-optimised, cable-friendly design of the separator. e-chain opener for the E micro "next generation" n e-chain opener is included with every eries E. and E.1 that can be opened. The opening of the e-chain links at high speeds saves significant installation time. Open a long piece of e-chain in one go. It s the ideal tool for your own mounting or assembly lines to minimise processing time significantly. More information www.igus.eu/e.1open Up to 7% less wear - Increase the service life of cables even further igus separators optimally adapted to cable geometry. They increase the service life of the cables up to factor. brasion-optimised, cable-friendly design, long service life Mounting-optimised - a simpler and faster assembly Easy-to-use interior separation range for any application tandard separator - no snap-in option, freely movable Notch separator - locks safely onto in, mm increments Partial horizontal subdivision is possible - eries E.1 D-CD files, configurators, PDF www.igus.eu/e.

7 E micro eries 7 Product range nap-open along inner radius, cost-effective,9 E micro eries 7 ccessories Mounting brackets, polymer one-piece locking More features 7 www.igus.eu/7 6...1(PZ) 17 8 8 6...(PZ),8/,8/,, eries 7 One-piece, snap-open along inner radius with film-hinge 6.. - 6.. / 6.. - 6.. nap-open along inner radius R ending radii Weight with without Dim. Dim. 7..R. 7. 16.R. 7..R. 7..R.* 7..R.* 16 16,, 6, 6, 6, 18 8 8 18 8 8 18 8 8 18 8 8 18 8 8,1,16,17,,...16....... 6.. 1PZ 6.16. 1PZ 6.. 1PZ 6.. 1PZ* 6.. 1PZ* 6.. 1 6.16. 1 6.. 1 6.. 1* 6.. 1* 16,, 7 7 7 1 * available upon request, please consult igus for delivery time upplement Part No. with required radius (R). Example: 7..18. * available upon request, please consult igus for delivery time Drilling pattern for Part No.: 6.. - 6.. center bores only / 6.. - 6.. outer bores only (see figure above) Dimensions Fill weight 1..7. 8,,9 1 Inner height,9 mm Pitch mm/link Links/m ( mm) Chain length / 1 Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index 1.... 6.. 1 PZ 1 must be indicated on preassembled configurations Full set. FL / D...7 1. Unsupported length / FL [m] Length of travel [m]. 1. 1.. R + 1-1 F = + R 18 8 8 1 71 91 D 6 66 76 K 1 16 The required clearance height: F = + mm (with, kg/m fill weight) 6 D-CD files, configurators, PDF www.igus.eu/7 7

9 E micro eries 9 Product range nap-open along inner radius, cost-effective 1, E micro eries 9 ccessories Mounting brackets, polymer one-piece locking More features 9 www.igus.eu/9 8...1(PZ) 17 8 1 1 8 8...(PZ),8/,8/,, eries 9 One-piece, snap-open along inner radius with film-hinge nap-open along inner radius R ending radii Weight with without Dim. Dim. 9..R. 9. 16.R. 9..R. 9..R. 9..R.** 16 18,, 8, 8, 8, 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8,,,,8,1...16....... 8.. 1PZ 8.16. 1PZ 8.. 1PZ 8.. 1PZ 8.. 1PZ* 8.. 1 8.16. 1 8.. 1 8.. 1 8.. 1* 18,, 8, 8, 8, 1 ** available upon request, please consult igus for delivery time upplement Part No. with required radius (R). Example: 9..8. * available upon request, please consult igus for delivery time Drilling pattern for Part No.: 8.. - 8.. center bores only / 8.. - 8.. all bores (see figure above) Dimensions Fill weight 1..7. FL 1 1, 19, Inner height 1, mm Pitch mm/link Links/m ( mm) Chain length / 1 Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index 1.... 8.. 1 PZ 1 must be indicated on preassembled configurations Full set. D /...7 1. Unsupported length / FL [m] Length of travel [m]. 1. 1.. R + 8 19, - 19, F = + 1 R 8 8 8 7 9 11 D 68 78 88 K 1 16 19 The required clearance height: F = + 1 mm (with, kg/m fill weight) 8 D-CD files, configurators, PDF www.igus.eu/9 9

9 E micro eries 9 Product range nap-open along outer radius, cost-effective For new designs we recommend E micro "next generation": eries E.1 1, E micro eries 9 ccessories Mounting brackets, polymer one-piece locking More features 9 www.igus.eu/9 8...1(PZ) 17 8 1 1 8 8...(PZ),8/,8/,, eries 9 Two-piece link design, snap-open along outer radius nap-open along outer radius R ending radii Weight with without Dim. Dim. 9. 9. 9. 9. 16.R..R..R..R. 16, 8, 8, 8, 8 8 8 8 8 8 8 8 8 8 8 8,,,8,1.16....... 8.16. 1PZ 8.. 1PZ 8.. 1PZ 8.. 1PZ 8.16. 1 8.. 1 8.. 1 8.. 1, 8, 8, 8, Drilling pattern for Part No.: 8.16. - 8.. center bores only / 8.. - 8.. all bores (see figure above) upplement Part No. with required radius (R). Example: 9..8. Dimensions Fill weight 1..7.. FL...7 1. Unsupported length / FL [m] Length of travel [m]. 1. 1.. 1,8 R 8 8 8 7 9 11 D 68 78 88 K 1 16 19 The required clearance height: F = + 1 mm (with, kg/m fill weight) D R + 1, 19, / Inner height 1, mm Pitch mm/link Links/m ( mm) Chain length / 8 19, - 19, F = + 1 1 Interior separation 1, 7 1. 111. 1 1.1 111.1 16 1.16 111.16 X Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index 1.... lotted separator for e-chains unassembled 9. assembled 9..1 Full-width shelf e-chains /e-tubes unassembled 1.X assembled 111.X 1. 111. 1. 111. 1. 111. 8.. 1 PZ 1 must be indicated on preassembled configurations Full set lotted separator 9. Is used when vertical separation is required. Due to its slot, it allows basic vertical/horizontal shelving arrangements. Full-width shelf 1.X This option makes sense in applications with many thin cables with similar diameters. For a consequent subdivision. Full-width shelves X unassembled assembled X unassembled assembled X unassembled assembled 1. 111. D-CD files, configurators, PDF www.igus.eu/9 1

E.1 Ei.1 EC.1 E micro eries E.1 Product range Next generation, stable, low noise, fast opening 1, 1, 1,9 E.1 Ei.1 EC.1 E micro eries E.1 ccessories Mounting brackets, polymer one-piece one side* or two side pivoting locking E.1 Ei.1 EC.1...E.1..Ei.1..EC.1 E.1..PZ two side pivoting E.1...PZ E.1..PZ one side* pivoting E.1...6PZ E.1..1PZ locking E.1...PZ 1, 8 1 1 8 eries E.1 nap-open along outer radius from both sides tandard eries Ei.1 nap-open along inner radius from both sides eries EC.1 One-piece, non snap-open e-chain nap-open along outer radius E.1..R. Ei.1..R. E.1. 1.R. Ei.1. 1.R. E.1. 16.R. Ei.1. 16.R. E.1..R. Ei.1..R. E.1..R. Ei.1..R. E.1..R. Ei.1..R. E.1..R. Ei.1..R.. 1. 1.. FL EC.1..R. EC.1. 1.R. EC.1. 16.R. ) EC.1..R. ) EC.1..R. ) EC.1..R. EC.1..R.. 1. Unsupported length / FL [m] 1.. Length of travel [m] 1.... 1 16 1, R 17,8,8,8 7,8 7,8 7,8 7,8 upplement Part No. with required radius (R). Example: E.1..8. Dimensions Fill weight nap-open along inner radius One-piece, non snapopen 1) Radius 7 only for eries EC.1. ) ED/TEX version available from stock D R ending radii 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 7 1) 8 8 8 1,/1,9 19, / E.1,18,19,,1,,6,9 1, Ei.1,18,19,,1,,6,9 19, - 19, EC.1,19,,,1,,6,9 Inner height E.1 1, mm Ei.1 1, mm EC.1 1,9 mm Pitch mm/link Links/m ( mm) Chain length / F = + 1. 1. 16...... 1 1,,,8/ E.1.. - E.1.. E.1.. - E.1..,, 8 1 1 8 with two side pivoting E.1..PZ E.1.1.PZ E.1.16.PZ E.1..PZ E.1..PZ E.1..PZ E.1..PZ with one side* pivoting E.1..6PZ E.1.1.6PZ E.1.16.6PZ E.1..6PZ E.1..6PZ E.1..6PZ E.1..6PZ Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index 1.... with locking E.1..1PZ E.1.1.1PZ E.1.16.1PZ E.1..1PZ E.1..1PZ E.1..1PZ E.1..1PZ dditional Features The quick flange can be clipped-in laterally in all mounting brackets. ousing for hexagonal nut or cylinder head screws M. ingle: Part No. E.1.QF / incl. mounting braket Part No. E.1..PZQF E.1..PZ1 + 1 + 17,8,8,8 7,8 7,8 7,8 7,8 * One side pivoting: Pivot angle = bending radius. One side pivoting only to the inner radius - whether mounted to 1 to! Dim. Dim. ø, 9,6 1 1 must be indicated on preassembled configurations Full set R 8 8 8 7 1) 7 9 11 169 D 68 78 88 11 K 1 16 19 8 The required clearance height: F = + 1 mm (with, kg/m fill weight) 1) Radius 7 only for eries EC.1. D-CD files, configurators, PDF www.igus.eu/e.1 ED/TEX permanently conductive e-chains - everal widths with delivery from stock: Inner widths 16 -, radii R 8-8. Full ED product range www.igus.eu/ed

E.1 Ei.1 EC.1 E micro eries E.1 ccessories Interior separation New generation E micro eries E.1 ccessories ssembly tools ave assembly time E.1 Ei.1 EC.1 E.1 Ei.1 7, 7, 1,, EC.1 7, 7, 1,9, ave assembly time - Interior separation assembly tool for the E micro "next generation" Convenient insertion of separators and shelves ignificant assembly time reduction Grip and mount can be ordered separately and are easy to change More information www.igus.eu/e.1open 1, 1, E.1..1 X E.1..1 unassembled E.1. assembled E.1..1 unassembled E.1. assembled E.1..1 111.X E.1..1 E.1..1 Note EC.1: For one-piece, non snap-open please assemble the interior separation before fitting the e-chain! s standard separators are assembled every nd e-chain link. tandard separator, for e-chains Notch separator for notch crossbar Full-width shelf e-chains unassembled 1.X assembled 111.X tandard - for any application Is used when vertical separation is required. Due to its slot, it allows basic vertical/horizontal shelving arrangements. No snap-in option, freely movable. Locks safely onto in, mm increments For exact positioning in e-chains. Recommended for sidemounted applications. brasion-optimised, cable-friendly design of the separator. Full-width shelf 1.X This option makes sense in applications with many thin cables with similar diameters. For a consequent subdivision. e-chain opener for the E micro "next generation" n e-chain opener is included with every eries E. and E.1 that can be opened. The opening of the e-chain links at high speeds saves significant installation time. Open a long piece of e-chain in one go. It s the ideal tool for your own mounting or assembly lines to minimise processing time significantly. More information www.igus.eu/e.1open Up to 7% less wear - Increase the service life of cables even further igus separators optimally adapted to cable geometry. They increase the service life of the cables up to factor. brasion-optimised, cable-friendly design, long service life Mounting-optimised - a simpler and faster assembly Easy-to-use interior separation range for any application tandard separator - no snap-in option, freely movable Notch separator - locks safely onto in, mm increments Partial horizontal subdivision is possible - eries E.1 Full-width shelves X unassembled assembled X unassembled assembled X unassembled assembled 1. 111. 1 1.1 111.1 16 1.16 111.16 1. 111. 1. 111. 1. 111. 1. 111. D-CD files, configurators, PDF www.igus.eu/e.1

8 E micro eries 8 Product range mall pitch, high stability For new designs we recommend E micro "next generation": eries EC.1 1 E micro eries 8 ccessories Mounting brackets, polymer one-piece locking More features www.igus.eu/8 8 8...1(PZ) 17 8 1 1 8 8...(PZ),8/,8/,, eries 8 One-piece, non snap-open e-chain e-chain non snap-open 8. 8. 8. 8. 8. 8. 8. 1 16.R..R..R..R..R..R..R. 1 16 18, 1,, 8, 8, 8, 8, *Radius available upon request, please consult igus for delivery time R ending radii 8 8 8 * 8 8 8* * 8 8 8 8 8 8 * 8 8 8 * 8 8 8 * 8 8 8 upplement Part No. with required radius (R). Example: 8..8. Weight,1,,,,8,1,7...1..16......... with 8.. 1PZ 8.1. 1PZ* 8.16. 1PZ 8.. 1PZ 8.. 1PZ 8.. 1PZ 8.. 1PZ *vailable upon request, please consult igus for delivery time Drilling pattern for Part No.: without 8.. 1 8.1. 1 8.16. 1 8.. 1 8.. 1 8.. 1 8.. 1 Dim. Dim. 18, 1,, 8, 8, 8, 8, 8.. - 8.. center bores only / 8.. - 8.. all bores (see figure above) 1 Dimensions Fill weight 1..7.. FL...7 1. Unsupported length / FL [m] Length of travel [m]. 1. 1.. R * 8 8 8 69 7 9 11 D 6 68 78 88 K 1 1 16 19 6 1 D R +6 1 19, The required clearance height: F = + 1 mm (with, kg/m fill weight) *Radius only for Part.No. 8.. and 8.. D-CD files, configurators, PDF www.igus.eu/8 / Inner height 1 mm Pitch mm/link Links/m ( mm) Chain length / 8 19, - 19, F = + 1 1 1, 7 X Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index 1.... Interior separation lotted separator for e-chains unassembled 9. assembled 9..1 Full-width shelf e-chains /e-tubes unassembled 1.X assembled 111.X 8.. 1 PZ 1 must be indicated on preassembled configurations Full set lotted separator 9. Is used when vertical separation is required. Due to its slot, it allows basic vertical/horizontal shelving arrangements. Full-width shelf 1.X This option makes sense in applications with many thin cables with similar diameters. For a consequent subdivision. Full-width shelves X unassembled assembled X unassembled assembled X unassembled assembled 1. 111. 1. 111. 1. 111. 1 1.1 111.1 1. 111. 16 1.16 111.16 1. 111. 7

E mini Introduction dvantages E mini election Table Universal: Mounting bracket with strain relief option pace-efficient: mallest inner heights and bending radii mooth: Dirt-repellent exterior Quiet: mall pitch for smooth running Variations: vailable as two-piece design, snap-open along inner radius (eries 1/F17) Variations: vailable as two-piece design, snap-open along outer radius (eries 1/17) mall and medium sizes - E mini E mini are small one-piece or two-piece e-chains, recommended for high dynamic applications. igus also offers a host of accessories and fixation options. "Upgrades" to openable versions are available for many types; they are interchangeable and can also serve as replacements. mall pitch for smooth running One- and two-piece e-chains available mallest inner heights and bending radii Very lightweight, easy to assemble and cost-effective Typical industries and applications Construction machinery andlings Furniture Packaging machines Textile machines Vehicle construction Woodworking machines Glass machines utomation General machinery eries Inner height Inner width Outer width Outer height ending radius Unsupported Page hi ha R length [m] E mini - One-piece e-chains One-piece, non snap-open 18 1-6 - 11 8-18 1, 11.1 1 1, 8-7 1, 11.8 8 8 9, 8 1, 11.1/11. 1 1 -, -, 6-1, E mini - One-piece e-chains nap-open along inner radius with film-hinge 1 1-6 - 61 8-1,6 F17 1 6 9 8 1, E mini - Two-piece e-chains nap-open along outer radius 6 8 6 66 Variations: vailable as two-piece design, snap-open along inner radius (eries 1i/17i) pecial version: vailable as one-piece design, non snap-open (eries /11.1/ 11.8/11.1/11.) Cleanroom Class 1 (IO class ) for eries, tested by the Dryden Engineering Company, California UL9-V classification - for eries 1 and F17 (UL9-V upon request) Electrically conductive ED/TEX versions upon request 1 17 1-6, - 11 8-18 1, 17 1 -, - 11 9 8-1* 1, E mini - Two-piece e-chains nap-open along inner radius 1i 17 1-6, - 11 8-18 1, 17i - 8, - 8, 9 8-1* 1, *Radii for several widths available upon request (please see product range table). 6 6 6 6 8 D-CD files, configurators, PDF www.igus.eu/emini 9

E mini Technical Data Overview E mini Order keys and Options Technical Data Options with order keys based on eries 1 Gliding speed / acceleration (maximum) [m/s] / [m/s ] peed / acceleration [m/s] / [m/s ] tandard NC-Version - (no camber) without pretension Reverse bending radius for circular movements Unsupported lengths +% possible ED / TEX classified e-chains II GD FL peed / acceleration FL [m/s] / 6 [m/s ] Part No. tandard Part No. NC-Version Part No. RR Part No. XXL-Material Part No. ED-Material Material - permitted temperature C, igumid G - up to +1 C NC +% Material - permitted temperature C, igumid N (only eries 1) - up to +8 C Material lower part - permitted temperature C, igumid G (only eries 1/1i, 17/17i, F17) - up to +1 C 1..R. 1..R..NC 1..R1/R. 1..R..XXL 1..R..ED Material crossbar- permitted temperature C, igumid N (only eries 1/1i, 17/17i, F17) - up to +8 C Flammability class: = with straight upper run igumid G = VDE IIC UL9- / igumid N = VDE IIC UL9-V FL = with permitted sag Delivery from stock Delivery time: upon request Delivery time: upon request Delivery time: upon request Delivery time: upon request Installation methods overview, maximum travels e-chain eries 1, m 11.1 1, m upon request upon request upon request upon request 11.8 1, m upon request upon request upon request upon request 11.1/11. 1, m upon request upon request upon request upon request 1,6 m 1i / 1 17i / 17 F17 Unsupported application 1, m 1, m 1, m Vertical hanging Vertical standing ide mounted unsupported Rotary application Zig-zag application upon request upon request upon request with rework upon request upon request upon request upon request with rework upon request upon request upon request upon request with rework upon request upon request upon request upon request with rework upon request upon request upon request upon request with rework upon request Order example Order key and colour options based on eries 1 Order example for complete e-chain (1, m), colour black, with mounting brackets and interior separation: e-chain (1, m) Please indicate e-chain length or number of links: 1, m or links + Mounting brackets 1 set (+ ) + Interior separation with separators assembled every nd link Order text: 1, m 1..8.+.PZ + x 1 Order key nap-open along outer radius nap-open along inner radius eries / Type index (depends on ) ending radius R Colour index (standard black) 1..8. Colours Order index 1i..8. lack tandard, from stock!..ed.t..1 1..8..PZ x 1 General igus colour options for e-chains and e-tubes late grey only ED material Grey brown only T material Grey only for e-chains Dusty grey only for e-tubes Colours White lack e-chains available from stock! Delivery time for special colours: upon request Order index for e-chains.1 /e-tubes Grey white for e-chains.1 /e-tubes Orange Yellow Light grey for e-chains /e-tubes for e-chains /e-tubes e-chains /e-tubes...1 D-CD files, configurators, PDF www.igus.eu/emini 1

E mini eries Product range table and cost-effective 18 E mini eries ccessories Mounting brackets, polymer one-piece pivoting locking 696...P(Z) /...1P(Z) 17 7, 1 16, 17 1...P(Z) /...P(Z 6, 6, 7 7 7 eries One-piece, non snap-open e-chain 1././8./.**./6./7.* 7 e-chain non snap-open R ending radii Weight pivoting: with without locking: Dim. with without Dim.. 1.R...R.. 8.R...R. 1 8 6 6 9 61 8 8 8 7 1 1 1 18 8 8 8 7 1 1 1 18 8 8 8 7 1 1 1 18 8 8 8 7 1 1 1 18.. 6. 7.R..R..R. 6 8 76 9 11 8 8 8 7 1 1 1 18 8 8 8 7 1 1 1 18 8 8 8 7 1 1 1 18 efore using this eries on long travels please consult igus. upplement Part No. with required radius (R). Example:..8.,,,6,,6,7,76 1.. 8... 6. 7. 1.PZ.PZ 8.PZ.PZ. PZ 6. PZ 7. PZ 1.P.P 8.P.P. P 6. P 7. P 1.1PZ.1PZ 8.1PZ.1PZ. 1PZ 6. 1PZ 7. 1PZ 1.1P.1P 8.1P.1P. 1P 6. 1P 7. 1P 8 6 8,, 8, 6, 7 9 11 ** Drilling pattern for Part No. 1././8./. see drawing left. Each valid for moving end and fixed end * Drilling pattern for Part No../6./7. see drawing right. Each valid for moving end and fixed end 6 8 Dimensions Fill weight. 1. 1.. FL. 1. 1.. Unsupported length / FL [m] Length of travel [m] 1.... 16 R D / 18 Inner height 18 mm Pitch, mm/link Links/m (6, mm) Chain length /, 8 - F = + 1 Interior separation 1, 8 Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index 1.... eparator, for e-chains unassembled assembled 1 111. PZ 1 must be indicated on preassembled configurations Full set pivoting eparator 1 For a simple vertical subdivision on e-chains. eparators can be arranged anywhere in the e-chain cross section. Interior separation for eries.1.r. not possible! R 8 8 8 7 1 1 1 18 79 99 119 17 7 1 8 D 8 9 1 17 167 18 7 K 1 18 1 8 6 The required clearance height: F = + mm (with, kg/m fill weight) D-CD files, configurators, PDF www.igus.eu/

11.1 E mini eries 11.1 Product range Large inner height, asymmetric design E mini eries 11.1 ccessories Mounting brackets, polymer one-piece pivoting 11.1 11...1P(Z) 11...P(Z) 17 1 17 17 1 17 6 ø,1 eries 11.1 One-piece, non snap-open e-chain e-chain non snap-open R ending radii Weight 11. 1.R. 1 1, 7, with without Dim. 1. 11.1.1PZ 11.1.1P 16 Dim. upplement Part No. with required radius (R). Example: 11.1.. Dimensions Fill weight. 1. 1. FL 1 8 Inner height mm Pitch, mm/link Links/m (6, mm) Chain length / Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index or. 11.1. 1 PZ must be indicated on preassembled configurations Full set pivoting.. 1. 1.. Unsupported length / FL [m] Length of travel [m] 1.... D / R, 8 16, 8-8 F = + R 7 1 17 D 7 1 K 8 The required clearance height: F = + mm (with, kg/m fill weight) D-CD files, configurators, PDF www.igus.eu/11.1

11.8 E mini eries 11.8 Product range Large inner height, asymmetric design 8 E mini eries 11.8 ccessories Mounting brackets, polymer one-piece pivoting 11.8 11...1P(Z) 17 1 17 17 1 11...P(Z) ø,1 eries 11.8 Non snap-open e-chain with moulded-in vertical separation e-chain non snap-open R ending radii 11. 8.R. 8 9 8 6,7 Dim. Dim. Weight with without Dim. 8. 11.8.1PZ 11.8.1P 6 9 8 Dim. 1 upplement Part No. with required radius (R). Example: 11.8.8. Dimensions Fill weight. 1. 1. FL 8, Inner height 8 mm Pitch, mm/link Links/m (6, mm) Chain length / Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index 11.8. 1 PZ must be indicated on preassembled configurations Full set pivoting. D /. 1. 1.. Unsupported length / FL [m] Length of travel [m] 1.... R, 8 1,, -, F = + R 8 119 D K 18 The required clearance height: F = + mm (with, kg/m fill weight) 6 D-CD files, configurators, PDF www.igus.eu/11.8 7

11.1 11. E mini eries 11.1 11. Product range Very large inner height, small outer width, asymmetric design 1 E mini eries 11.1 11. ccessories Mounting brackets, polymer one-piece locking 11.1 11. 11...1P(Z) 17 7, 1 16, 16, 1 7, 11...P(Z) 6, 11 eries 11.1 11. One-piece, non snap-open e-chain e-chain non snap-open R ending radii Weight with without Dim. Dim. 11. 1 11..R..R. 1,, 6 7 6 7,, 1.. 1.1PZ.1PZ 1.1P.1P 6 6 upplement Part No. with required radius (R). Example: 11.1.. Dimensions Fill weight. 1. 1. FL 1,/, 1 6 Inner height 1 mm Pitch, mm/link Links/m (6, mm) Chain length / Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index 1. 1 PZ must be indicated on preassembled configurations Full set locking. D /. 1. 1.. Unsupported length / FL [m] Length of travel [m] 1.... R,, 6-6 F = + R 6 7 19 19 19 69 D 1 1 1 18 K 19 6 8 The required clearance height: F = + mm (with, kg/m fill weight) 8 D-CD files, configurators, PDF www.igus.eu/11.1 9

1 E mini eries 1 Product range nap-open along inner radius, outer radius closed E mini eries 1 ccessories Mounting brackets, polymer one-piece locking More features www.igus.eu/1 1 11...1P(Z) 17 7 1 17 11...P(Z) 17 1 7 6, eries 1 One-piece, snap-open along inner radius with film-hinge nap-open along inner radius R ending radii Weight with without Dim. Dim. 1. 1 1. 1. 1..R..R..R..R. 1 8 6 6 9 61 8 8 8 7 1 8 8 8 7 1 8 8 8 7 1 8 8 8 7 1,1,,,1 1.... 11.1.1PZ 11..1PZ 11..1PZ 11..1PZ 11.1.1P 11..1P 11..1P 11..1P 6, 6, 9, 61, upplement Part No. with required radius (R). Example: 1..8. Material mounting bracket - igumid G, temperature: - up to +1 C, VDE IIC UL9- Dimensions Fill weight 1..7. 16 Inner height mm Pitch, mm/link Links/m (6, mm) Chain length / 1 Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index 1.... 11.. 1 PZ 1 must be indicated on preassembled configurations Full set pivoting. FL D /...7 1. Unsupported length / FL [m] Length of travel [m]. 1. 1.., R 8 - F = + R 8 8 8 7 1 81 1 11 17 7 D 86 96 6 1 18 18 K 1 18 1 8 The required clearance height: F = + mm (with, kg/m fill weight) 6 D-CD files, configurators, PDF www.igus.eu/1 61

1i 1 E mini eries 1i 1 Product range nap-open along inner and outer radius 17 17 E mini eries 1i 1 ccessories Mounting brackets, polymer one-piece pivoting locking 696 1i 1...P(Z) /...1P(Z) 17 7, 1 16,...P(Z) /...P(Z 17 1...1i...1 6, 6, 7 7 7 eries 1i snap-open along inner radius eries 1 along outer radius tandard 1././8./.**./6./7.* 7 nap-open along inner radius 1i. 1.R. 1i..R. 1i. 8.R. 1i..R. 1i..R. 1i. 6.R. 1i. 7.R. Dimensions Fill weight. 1. 1.. FL. 1. 1.. Unsupported length / FL [m] Length of travel [m] 1.... R D / R 8 8 7 1 1 1 18 99 119 17 7 1 8 D 9 1 17 167 18 7 K 18 1 8 6 6 nap-open along outer radius 1. 1.R. 1..R. 1. 8.R. 1..R. 1..R. 1. 6.R. 1. 7.R. 1 8 6 8 efore using this eries on long travels please consult igus. 6 6 9 61 76 9 11 R ending radii upplement Part No. with required radius (R). Example: 1..8. 8 8 7 1 1 1 18 8 8 7 1 1 1 18 8 8 7 1 1 1 18 8 8 7 1 1 1 18 8 8 7 1 1 1 18 8 8 7 1 1 1 18 8 8 7 1 1 1 18 1 1 1i The required clearance height: F = + mm (with, kg/m fill weight) 17 D-CD files, configurators, PDF www.igus.eu/1i www.igus.eu/1, 8 1i,,,6,,6,7,76 Inner height 17 mm - 1,,,6,,6,7,76 Pitch, mm/link Links/m (6, mm) Chain length / F = + 1.. 8... 6. 7. 1.PZ.PZ 8.PZ.PZ. PZ 6. PZ 7. PZ 1.P.P 8.P.P. P 6. P 7. P 1.1PZ.1PZ 8.1PZ.1PZ. 1PZ 6. 1PZ 7. 1PZ 1.1P.1P 8.1P.1P. 1P 6. 1P 7. 1P 8 6 8,, 8, 6, 7 9 11 ** Drilling pattern for Part No. 1././8./. see drawing left. Each valid for moving end and fixed end * Drilling pattern for Part No../6./7. see drawing right. Each valid for moving end and fixed end 1 Interior separation 1, 8 1,,7 Full-width shelves pivoting: with without X Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index 1.... lotted separator for e-chains unassembled assembled ide plate for e-chains unassembled assembled Full-width shelf for e-chains unassembled assembled locking: Dim. with without 1 1 1 16 1.X 111.X X unassembled assembled X unassembled assembled X unassembled assembled 1 1.1 111.1 1. 111. 1. 111. 1. 111. 6 1.6 111.6 8 1.8 111.8 8 1.8 111.8. PZ 1 6 8 must be indicated on preassembled configurations Full set pivoting lotted separator 1 Is used when vertical separation is required. Due to its slot, it allows basic vertical/horizontal shelving arrangements. ide plate 1 ide plate for use with full-width shelf 1.X and slotted separator1. Dim. Full-width shelf 1.X This option makes sense in applications with many thin cables with similar diameters. For a consequent subdivision. Fullwidth shelves can be arranged at different heights (in mm increments). 6

17i 17 E mini eries 17i 17 Product range nap-open along inner and outer radius E mini eries 17i 17 ccessories Mounting brackets, polymer one-piece locking 17i 17 117...1P(Z) 17 7 1 17 17 1 7 117...P(Z)...17i...17 /9 /9,, eries 17i snap-open along inner radius eries 17 along outer radius tandard 117.1. / 117.. - 117.7. nap-open along inner radius 17i. 1.R.** 17i..R. 17i..R. 17i..R. 17i..R.** 17i. 6.R.** 17i. 7.R.**. 1. 1.. FL. 1. 1.. Unsupported length / FL [m] Length of travel [m] 1.... D / R 8, R 8 6 7 1 1 16 189 9 89 D 11 18 1 16 19 K 1 6 8 The required clearance height: F = + mm (with 1, kg/m fill weight) Radii for several widths available upon request (please see product range table above). 6 17. 1.R. 17..R. 17..R. 17..R. 17..R. 17. 6.R. 17. 7.R. 1 8 6 8,, 8, 6, 76 9 11 8 1) 6 7 1 8 6 1) 7 1) 1) 1 1) 8 6 7 1 8 6 1) 7 1) 1 8* 6 7 1 8 6 7 1 8* 6 7 1 ** available upon request, please consult igus for delivery time *Radius available upon request, please consult igus for delivery time 1) Radius only for eries 17. For eries 17i available upon request, please consult igus for delivery time upplement Part No. with required radius (R). Example: 17..8. Dimensions Fill weight nap-open along outer radius R ending radii 8 17 17i 9 9 17i,,9,6,7,8,9 1,6 Inner height mm D-CD files, configurators, PDF www.igus.eu/17i www.igus.eu/17-9 17,,9,6,7,8,9 1,6 Pitch, mm/link Links/m (6, mm) Chain length / F = + 1..... 6. 7. 1 Full-width shelves 1, with 117.1.1PZ 117..1PZ 117..1PZ 117..1PZ 117..1PZ 117.6.1PZ 117.7.1PZ X 117.1.1P 117..1P 117..1P 117..1P 117..1P 117.6.1P 117.7.1P 171 17 17 17 1.X 111.X X unassembled assembled X unassembled assembled X unassembled assembled 1 1.1 111.1 1. 111. 1. 111. 1. 111. 6 1.6 111.6 8 1.8 111.8 8 1.8 111.8 Interior separation tandard Further interior separation elements lotted separator for 17.1 up to 17. unassembled assembled lotted separator for 17. bis 17.7 unassembled assembled Full-width shelf for e-chains unassembled assembled without Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index 1.... Dim. 1 7 8 6 8 117.. 1 PZ 1,, 8, 6, 76 9 11 Drilling pattern for Part No.: 117.1. center bores only / 117.. -117.7. outer bores only (see figure above) Dim. 6 8 must be indicated on preassembled configurations Full set locking www.igus.eu/17 lotted separator 171 (17.1 up to 17.) Is used when vertical separation is required. Due to its slot, it allows basic vertical/horizontal shelving arrangements. lotted separator 17 (17. up to 17.7) Is used when vertical separation is required. Due to its slot, it allows basic vertical/horizontal shelving arrangements. Full-width shelf 1.X (for all widths) This option makes sense in applications with many thin cables with similar diameters. For a consequent subdivision. Fullwidth shelves can be arranged at different heights (in mm increments). 6

F17 E mini eries F17 Product range Large inner height, small outer width, outer radius closed E mini eries F17 ccessories Mounting brackets, polymer one-piece locking F17 117...1P(Z) 117...P(Z) 17 7 1 117.1, eries F17 One-piece, snap-open along inner radius with film-hinge nap-open along inner radius R ending radii Weight F17. 1.R. 1 6 8 6* 7 * 1*, with without Dim. 1 117.1.1PZ 117.1.1P 7,7 Dim. *Radius available upon request, please consult igus for delivery time upplement Part No. with required radius (R). Example: F17.1.8. Dimensions Fill weight. 1. 1.. FL. 1. 1.. Unsupported length / FL [m] Length of travel [m] 1.... R D / R 8 6* 7 * 1* 1 16 189 9 89 D 11 18 1 16 19 K 1 6 8 The required clearance height: F = + mm (with, kg/m fill weight) * *Radius available upon request, please consult igus for delivery time 66 D-CD files, configurators, PDF 1, 9, www.igus.eu/f17 Inner height mm Pitch, mm/link Links/m (6, mm) Chain length / 9-9 F = + Material mounting bracket - igumid G, temperature: - up to +1 C, VDE IIC UL9-1 Interior separation 1, 8 Full-width shelves X unassembled assembled 1 1.1 111.1 X Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index 1.... lotted separator for e-chains unassembled R171 assembled R17 Full-width shelf e-chains /e-tubes unassembled 1.X assembled 111.X 117.1. 1 PZ 1 must be indicated on preassembled configurations Full set locking lotted separator R171 Is used when vertical separation is required. Due to its slot, it allows basic vertical/horizontal shelving arrangements. Full-width shelf 1.X This option makes sense in applications with many thin cables with similar diameters. For a consequent subdivision. Fullwidth shelves can be arranged at different heights (in mm increments). 67

E/ Introduction dvantages Universal: Many mounting options with or without strain relief Easy to assemble: Opening system from left or right igh stability: Large pin "snap fastener" with high clamping force llrounder for a wide range of applications - ystem E/ The E/ eries is igus fourth generation in this popular size range. ll past experiences went into this eries: easy and versatile assembly combined with ruggedness - high stability paired with quieter motion - long cable life and many fixation options. The design is consistent within all E/ variations. It is the standard product for machine builders around the world. E/ Features ccessories 18 nap-open mechanism, choice inged crossbar can be swiveled of snap-open on left or right by more than 18 on both sides ecure fit of separators and interior separation even when e-chain is open Long lifetime: Lateral gliding surfaces igh unsupported lengths: Due to a double, square stop dog Typical industries and applications Material handling Construction machinery Woodworking machines Glass machines Plastic machines Long travel applications in many industries emicon Theatre, entertainment and amusement parcs Vehicles General machinery Electrically conductive ED/TEX versions several eries available from stock alf e-tube - Fully enclosed in outer radius, choice of snap-open on left or right Fast closing by hand - secure fit without additional locking devices Rapid opening with a screwdriver or the e-chain opener Variations: e-chain or e-tube, openable at the inner or outer radius 6 d() tested in igus lab, v = 1, m/s unsupported, e.g. eries 6..7. UL9-V classification upon request Open E/ in a flash with the e-chain opener www.igus.eu/savetime train relief e.g. clamps,, nuggets and plug-in clips from page 66 Extender crossbars - Enormous increase of the interior IP Qualification Certificate - Report IG 1-6-1: IO Class, according to DIN EN IO 16-1 for ystem E/, eries 1..8. at v =, / 1, /, m/s IP Qualification Certificate - Report IG 8-9: IO Class, according to DIN EN IO 16-1 for ystem E/, eries... at v =, m/s luminium"upertrough" - The igus standard guide trough from page 69 rol e-chain E/ - Rolling instead of gliding. Reduce driving force support tray kit. For support of the lower run from page 7 68 Discover the advantages www.igus.eu/best/e 69

E/ election Table E/ Technical Data Overview eries Inner height Inner width Outer width Outer height ending radius Unsupported Page hi ha R length [m] Technical Data E/ e-chains tandard for ystem E snap-open along outer radius from both sides FL Gliding speed / acceleration (maximum) [m/s] / [m/s ] peed / acceleration [m/s] / [m/s ] peed / acceleration FL [m/s] / 6 [m/s ] 1 1 1-1 8, - 18, 8-18 1,7-1 1-11 -, 7-17 66-19 6 -,7-7 - 7 6 7 -, 8 - - 119-1,8 7 86 98 Material - permitted temperature C, igumid G Flammability class, igumid G = with straight upper run FL = with permitted sag up to +1 C VDE IIC UL9- E/ e-chains snap-open along inner radius from both sides Installation methods overview, maximum travels 1 1 1-1 8, - 18, 8-18 1,7-1 1-11 -, 6-17 66-19 6 -,7-7 - 7 6 7 -, 7 86 98 e-chain / e-tube eries Unsupported application Gliding application Vertical hanging Vertical standing ide mounted unsupported 1/1/1/18 1,7 m 7 m m, m,7 m Rotary application Zig-zag application Unsupported length lower run with rework upon request upon request ///8, m m m, m 1, m with rework upon request upon request alf e-tubes snap-open along inner radius from both sides 6/7/6/68,7 m 1 m m, m 1, m ///8, m 1 m 8 m, m 1, m with rework upon request upon request with rework upon request upon request 1 1 1-1 8, - 18, 8 7-18 1,7-1 1-11 7 -, 6-17 66-19 -,7-7 - 7 6 1 -, 8 9 16 1,8 m m m, m 1, m with rework upon request upon request Full e-tubes snap-open along inner radius from both sides 18 1 1-1 8, - 18, 8 7-18 1,7 8-1 1-11 7 -, 68-17 66-19 -,7 8-7 - 7 6 1 -, 8 9 16 7 D-CD files, configurators, PDF www.igus.eu/e 71

E/ Order keys and Options E/ Order keys and Options Options with order keys based on eries ///8 tandard dditional noise dampening with pads NC-Version - (no camber) without pretension Reverse bending radius for circular movements Unsupported lengths +% possible No burning-in of hot chips up to +8 C (16 F) ED / TEX classified e-chains II GD Magnetically detectable plastic e-chains for the food- and tobacco industry Part No. tandard Part No. Low noise (with pads) Part No. NC-Version NC Part No. RR Part No. XXL-Material ) +% Part No. igumid T-Material only for e-tubes Part No. ED-Material Part No. igumid DT-Material..R...R...R..NC..R1/R...R..XXL 8..R..T..R..ED..R..DT e-chain snap-open along inner radius 1) e-chain snap-open along inner radius 1) e-chain snap-open along inner radius 1) e-chain snap-open along inner radius 1) e-chain snap-open along inner radius 1) Complete e-tube* e-chain snap-open along inner radius 1) e-chain snap-open along inner radius 1)..R...R...R..NC..R1/R...R..XXL 8.T.R...R..ED..R..DT e-chain snap-open along outer radius alf e-tube snap-open along inner radius 1) e-chain snap-open along outer radius e-chain snap-open along outer radius e-chain snap-open along outer radius ottom only* e-chain snap-open along outer radius e-chain snap-open along outer radius..r. alf e-tube snap-open along inner radius 1) 8..R. e-tube snap-open along inner radius 1)..R..NC alf e-tube snap-open along inner radius 1) RR for e-tubes - please consult igus..r..xxl alf e-tube snap-open along inner radius 1)..R..ED alf e-tube snap-open along inner radius 1)..R..DT alf e-tube snap-open along inner radius 1) 8..R. e-tube snap-open along inner radius 1) 8..R..NC e-tube snap-open along inner radius 1) RR for e-tubes - please consult igus 8..R..XXL e-tube snap-open along inner radius 1) 8..R..ED e-tube snap-open along inner radius 1) 8..R..DT e-tube snap-open along inner radius 1) Delivery from stock Delivery time: upon request 1) efore using this eries in gliding applications, please consult igus * vailable upon request, please consult igus for delivery time! Delivery time: upon request Delivery time: upon request ) pon request Delivery time: upon request ) Lower part made of XXL-Material Delivery time: upon request Delivery time: everal series from stock Delivery time upon request Order example based on eries ///8 Order key and colour options based on eries ///8 Order example for complete e-chain (1, m), colour black, with mounting brackets and interior separation: e-chain (1, m) Please indicate e-chain length or number of links: 1, m or links + Mounting brackets 1 set (with ) + Interior separation with separators assembled every nd link Order text: 1, m... +.PZ + x Part No. 11 Magnetically detectable plastic e-chains For the food- and tobacco industry The material igumid DT is detected to the tiniest fragment all common metal detection systems and can therefore be selected automatically Particles as small as 1. mm can be recognised for fragments passing at speeds of m/min More information www.igus.eu/detectable-chain....pz+ x 11 Order key e-chain snap-open along outer radius e-chain snap-open along inner radius alf e-tube snap-open along inner radius Full e-tube snap-open along inner radius eries / Type index (depends on ) ending radius R Colour index (standard black)......... 8... General igus colour options for e-chains and e-tubes Colours Order index Colours Order index lack tandard, from stock!. White for e-chains.1 /e-tubes late grey only ED material.ed Grey white for e-chains.1 /e-tubes Grey brown only T material.t Orange for e-chains. /e-tubes Grey only for e-chains. Yellow. for e-chains /e-tubes Dusty grey only for e-tubes.1 Light grey e-chains.1 /e-tubes lack e-chains available from stock! Delivery time for special colours: upon request 7 D-CD files, configurators, PDF www.igus.eu/e 7

1 1...1 1. 1.R. 1..R. 1..R. 1. 8.R. 1..R. 1. 68.R. 1. 8.R. 1..R. 1. 1.R. 1. 1.R. 1) 1..R. 1) 1..R. 1) 1. 8.R. 1) 1..R. 1) 1. 68.R. 1) 1. 8.R. 1) 1..R. 1. 1.R....1 e-chains eries 1 snap-open along inner radius e-chains eries 1 snap-open along outer radius e-chains snap-open along inner radius E/ e-chains 1 1 Product range mall radii, high stability e-chains snap-open along outer radius 1 8 68 8 1 8,, 8, 1, 6, 81, 9, 11, 18, R ending radii 8 8 7 1 1 18 8 8 7 1 1 18 8 8 7 1 1 18 8 8 7 1 1 18 8 8 7 1 1 18 8 8 7 1 1 18 8 8 7 1 1 18 8 8 7 1 1 18 8 8 7 1 1 18 1) ED/TEX version available from stock alf e-tubes, eries 1 and full e-tubes eries 18 from page 8 upplement Part No. with required radius (R). Example: 1.8.. 1 1 1,6,7,9,,6,6,67,7,8 1,6,7,9,,6,6,67,7,8 E/ e-chains 1 1 Dimensions Unsupported applications hort travels Fill weight 8. 6... 1. 1.. FL D 1... Unsupported length / FL [m] Length of travel [m].. 6. / 18 R 1 1 R 8 8 7 1 1 18 98 1 178 8 78 18 88 D 99 11 19 16 189 9 K 18 19 8 6 6, The required clearance height: F = + mm (with, kg/m fill weight) efore using eries 1 on long travels please consult igus. Gliding applications Long travels from m to 7 m CL = Offset fixed point / 1 8 / 66 698 Inner height 1 mm K 7, 8 D - 8 1 1 Pitch, mm/link Links/m ( mm) Chain length / R F = + ED/TEX permanently conductive e-chains - 1 several widths with delivery from stock: Inner widths 1-8, radii R 8-1. Full ED product range www.igus.eu/ed Guide trough with glide bar Guide trough without glide bar RI Total length of guide trough Note: For long travel (gliding) applications, please consult igus. For long travels, igus specifies eries 1 that snaps open along the outer radius. In case of travels between and m we recommend a longer unsupported length. Chain length / Open e-chains in a flash with the igus e-chain opener Reduce assembly time from to sec. with the igus e-chain Opener. Open a long piece of e-chain in one go. Part No. 98..1 for eries 1/1. For widths :,, 68, 8,. More information and video www.igus.eu/savetime R 8 8 7 1 1 18 7 76 96 1 D + 99 11 19 9 69 K 18 19 6 8 9 117 CL 179 efore using eries 1 on long travels please consult igus. 7 D-CD files, configurators, PDF www.igus.eu/1 www.igus.eu/1 7

1 1 E/ e-chains 1 1 ccessories Mounting brackets, polymer pivoting locking E/ e-chains 1 1 ccessories Mounting brackets, polymer pivoting 1 1 1...PZ / 1...1PZ, 8 1 18 8 1 8 1, 8, 19, 11-1 1-11 ø 6, ø 11,8/ 1...PZ / 1...PZ, 1, 1, 1, 1...PZ() ø 6, 1 7, 7, ø, ø, 1...PZ() 1 ø 6, -7 depending on radius Polymer pivoting Recommended for unsupported and gliding applications tandard Polymer locking Recommended for vertical hanging and standing applications Polymer pivoting Recommended for unsupported and gliding applications For tight installation conditions pivoting: with locking: with Dim. Dim. pivoting: with without Dim. Dim..1......8....68..8....1. 11.PZ 1.PZ 1.PZ 18.PZ 1.PZ 168.PZ 18.PZ 1.PZ 11.PZ 11.1PZ 1.1PZ 1.1PZ 18.1PZ 1.1PZ 168.1PZ 18.1PZ 1.1PZ 11.1PZ 1 6 66 86 111 8,, 8, 1, 6, 81, 9, 11, 18, 7 8 1.1......8....68..8....1. 1..PZ 1..PZ 1.8.PZ 1.8.PZ 1..PZ 1..PZ 1.68.PZ 1.68.PZ 1.8.PZ 1.8.PZ 1..PZ 1..PZ 1.1.PZ* 1.1.PZ* 1 7 67 87 11 *Tiewrap plate (consists of x.z) does not snap on but needs to be bolted down separately Note: Mounting brackets not to assemble at the gable end 1 6 8 6 8 1 1 Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index 1.... 18. PZ 1 must be indicated on preassembled configurations Full set pivoting = 1 Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index 1.... 1.8.PZ1 must be indicated on preassembled configurations Full set pivoting = Option: teel locking Part No. 1.1 - For e-chains and e-tubes available Locked connections One part (-piece) for all e-chain widths Electrically conductive train relief e.g. clamps,, nuggets and plug-in clips are available from stock. The complete chainfix range with order options from page 66 train relief e.g. clamps,, nuggets and plug-in clips are available from stock. The complete chainfix range with order options from page 66 76 D-CD files, configurators, PDF www.igus.eu/1 www.igus.eu/1 77

1 1 E/ e-chains 1 1 ccessories Interior separation New generation E/ e-chains 1 1 Further ccessories 1 1 Previous interior separation with optional elements www.igus.eu/1 www.igus.eu/1 X - 6 mm 9,, 9, 1 1.1.1 1..1 1..1.X 1..1 No lateral spacing to side links necessary. s standard separators are assembled every nd e-chain link., 1.1 tandard separator, wide base unassembled 1.1 assembled 1.1.1 tandard - for any application eparator with wide base for maximum locking strength and safe standing in e-chains., 1. eparator, narrow head unassembled assembled 1. 1..1 For even faster installation Firm hold to one side with a wide base, narrow on opposed side for easy cable assembly. E/ eries 1 in aircraft refuelling truck - telescopic crane with six sections, 1. eparator, narrow base unassembled assembled 1. 1..1 For many thin cables eparator with a narrow base for a large number of thin cables side by side. aves space in e-chains., 1, 6, 1. eparator, asymmetrical unassembled assembled 1. 1..1 For side-mounted applications symmetrical separator, for defined distance. No additional spacers necessary., X -1 Full-width shelf, lockable unassembled.x assembled.x orizontal separation Full-width shelf locks safely into separators on both ends, fixed width possible. eparators can be moved freely over the shelf in horizontal direction. Can be used at one height. Lockable full-width shelves - for the standard interior separation eparator with integrated strain relief train relief separator Part No. 1.1.Z can be integrated into the mounting bracket and can be placed at any point of the e-chain. It combines strain relief and interior separation, it can be installed on the first or last e-chain link and is easy to assemble without any screws. More information from page 676 X unassembled assembled X unassembled assembled X unassembled assembled 1.1.1 6.6.6 87.87.87.... 8.8.8.... 6.6.6 6.6.6 7.7.7 7.7.7 77.77.77 9.9.9.... 1.1.1 1.1.1 Optional: upport tray kit - for support of the lower run imple one-piece support trays according to your requirements and specification Easy installation onto your machine, on profiles or wall-mount brackets igus support tray - available in types and options More information from page 7 7.7.7 8.8.8 1.1.1 78 D-CD files, configurators, PDF www.igus.eu/1 www.igus.eu/1 79

1 18...1 1. 1..R. 18. 1..R. 1...R.** 18...R.** 1...R. 18...R. 1. 8..R. 18. 8..R. 1...R. 18...R. 1. 68..R. 18. 68..R. 1. 8..R. 18. 8..R. 1...R. 18...R. 1. 1..R. 18. 1..R. 8,, 8, 1, 6, 81, 9, 11, 18,...18 alf e-tubes eries 1 snap-open along inner radius, closed along outer radius Full e-tubes eries 18 snap-open along inner radius, fully enclosed alf e-tubes snap-open along inner radius E/ e-tubes 1 18 Product range Chip protection Full e-tubes snap-open along inner radius 1 8 68 8 1 ** available upon request, please consult igus for delivery time *Radius available upon request, please consult igus for delivery time For radii, 8, 8 the e-tube is not fully enclosed. Please consult igus. R ending radii upplement Part No. with required radius (R). Example: 1.8.. * 8* 8* 7 1 1 18 * 8* 8* 7 1 1 18 * 8* 8* 7 1 1 18 * 8* 8* 7 1 1 18 * 8* 8* 7 1 1 18 * 8* 8* 7 1 1 18 * 8* 8* 7 1 1 18 * 8* 8* 7 1 1 18 * 8* 8* 7 1 1 18 1,8,1,,9,6,7,8,9 1, 1 18,,1,7,61,67,77,8,9 1,8 E/ e-tubes 1 18 Dimensions Unsupported applications hort travels Fill weight 8. 6... 1. 1.. FL D 1... Unsupported length / FL [m] Length of travel [m].. 6. 18 R * 8* 8* 7 1 1 18 98 1 178 8 78 18 88 D 99 11 19 16 189 9 K 18 19 8 6 6 R 1/18, 1 8 / The required clearance height: F = + mm (with, kg/m fill weight) *Radius available upon request, please consult igus for delivery time efore using eries 1/18 on long travels please consult igus. 7, 66 Inner height 1 mm 8-8 1 18 Pitch, mm/link Links/m ( mm) Chain length / F = + Open e-chains in a flash with the igus e-chain opener Reduce assembly time from to sec. with the igus e-chain Opener. Open a long piece of e-chain in one go. Part No. 98..1 for eries 1. For widths :,, 68, 8,. More information and video www.igus.eu/savetime 8 D-CD files, configurators, PDF www.igus.eu/1 www.igus.eu/18 81

1 18 E/ e-tubes 1 18 ccessories Mounting brackets, polymer pivoting locking E/ e-tubes 1 18 ccessories Mounting brackets, polymer pivoting 1 18 1...PZ / 1...1PZ, 8 1 18 8 1 8 1, 8, 19, 11-1 1-11 ø 6, ø 11,8/ 1...PZ / 1...PZ, 1, 1, 1, 1...PZ() ø 6, 1 7, 7, ø, ø, 1...PZ() 1 ø 6, -7 depending on radius Polymer pivoting Recommended for unsupported applications tandard Polymer locking Recommended for vertical hanging and standing applications Polymer pivoting Recommended for unsupported applications For tight installation conditions pivoting: with locking: with Dim. Dim. pivoting: with without Dim. Dim..1......8....68..8....1. 11.PZ 1.PZ 1.PZ 18.PZ 1.PZ 168.PZ 18.PZ 1.PZ 11.PZ 11.1PZ 1.1PZ 1.1PZ 18.1PZ 1.1PZ 168.1PZ 18.1PZ 1.1PZ 11.1PZ 1 6 66 86 111 8,, 8, 1, 6, 81, 9, 11, 18, 7 8 1.1......8....68..8....1. 1..PZ 1..PZ 1.8.PZ 1.8.PZ 1..PZ 1..PZ 1.68.PZ 1.68.PZ 1.8.PZ 1.8.PZ 1..PZ 1..PZ 1.1.PZ* 1.1.PZ* 1 7 67 87 11 *Tiewrap plate (consists of x.z) does not snap on but needs to be bolted down separately Note: Mounting brackets not to assemble at the gable end 1 6 8 6 8 1 1 Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index 1.... 18. PZ 1 must be indicated on preassembled configurations Full set pivoting = 1 Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index 1.... 1.8.PZ1 must be indicated on preassembled configurations Full set pivoting = Option: teel locking Part No. 1.1 - For e-chains and e-tubes available Locked connections One part (-piece) for all e-chain widths Electrically conductive train relief e.g. clamps,, nuggets and plug-in clips are available from stock. The complete chainfix range with order options from page 66 train relief e.g. clamps,, nuggets and plug-in clips are available from stock. The complete chainfix range with order options from page 66 8 D-CD files, configurators, PDF www.igus.eu/1 www.igus.eu/18 8

1 18 E/ e-tubes 1 18 ccessories Interior separation E/ e-tubes 1 18 Further ccessories 1 18 9,,7,7 1 9,,7, 111 111.X No lateral spacing to side links necessary. s standard separators are assembled every nd e-chain link. 1, 8 lotted separator for e-tubes unassembled 11 assembled 111 lotted separator 11 Is used when vertical separation is required. Due to its slot, it allows basic vertical/horizontal shelving arrangements. X Full-width shelf for e-tubes unassembled 1.X assembled 111.X Full-width shelf 1.X This option makes sense in applications with many thin cables with similar diameters. For a consequent subdivision. Fullwidth shelves can be arranged at different heights (in,7 mm increments). Installation-optimised delivery of an igus readychain - here system E/ Full-width shelves X unassembled assembled X unassembled assembled X unassembled assembled 1 1.1 111.1 1. 111. 1. 111. 8 1.8 111.8 1. 111. 68 1.68 111.68 8 1.8 111.8 1. 111. 1 1.1 111.1 Optional: upport tray kit - for support of the lower run imple one-piece support trays according to your requirements and specification Easy installation onto your machine, on profiles or wall-mount brackets igus support tray - available in types and options More information from page 7 8 D-CD files, configurators, PDF www.igus.eu/1 www.igus.eu/18 8

... E/ e-chains Product range llrounder, high stability... E/ e-chains Dimensions Unsupported applications hort travels Fill weight 8. 6... 1. FL D 66 7 Inner height mm Pitch 6 mm/link Links/m (1 mm) Chain length / 1. / e-chains eries snap-open along inner radius e-chains eries snap-open along outer radius e-chains snap-open along inner radius e-chains snap-open along outer radius R ending radii. 1... Unsupported length / FL [m] Length of travel [m].. 6. R +6 6 - F = +..R...R...R.. 7.R.. 9.R...R.. 1.R...R. 1)..R. 1)..R. 1). 7.R. 1). 9.R. 1)..R. 1). 1.R. 1) 8 7 77 89 1 1 7 9 119 11 7 1 1 17 7 1 1 17 7 1 1 17 7 1 1 17 7 1 1 17 7 1 1 17 7 1 1 17,77,8,91 1,1 1,8 1,1 1,,77,8,91 1,1 1,8 1,1 1, R 7 1 1 17 1 18 8 8 8 D 1 16 187 1 7 6 87 1 7 K 6 8 6 6 7 8 88 The required clearance height: F = + mm (with 1, kg/m fill weight) efore using eries on long travels please consult igus. 1) ED/TEX version available from stock alf e-tubes, eries and full e-tubes eries 8 from page 9 Non snap-open e-chains E medium classics, eries www.igus.eu/ upplement Part No. with required radius (R). Example:... Gliding applications Long travels from m to m / / CL = Offset fixed point K D R ED/TEX permanently conductive e-chains - several widths with delivery from stock: Inner widths - 1, radii R - 17. Full ED product range www.igus.eu/ed Guide trough with glide bar Guide trough without glide bar RI Total length of guide trough Note: For long travel (gliding) applications, please consult igus. For long travels, igus specifies eries that snaps open along the outer radius. In case of travels between and m we recommend a longer unsupported length. Chain length / Open e-chains in a flash with the igus e-chain opener Reduce assembly time from to sec. with the igus e-chain Opener. Open a long piece of e-chain in one go. Part No. 98.. for eries /. For widths :, 7, 9 More information and video www.igus.eu/savetime R 7 1 1 17 1 1 D + 1 16 8 9 7 9 11 K 6 6 76 1 1 17 16 179 CL 6 67 7 8 efore using eries on long travels please consult igus. 86 D-CD files, configurators, PDF www.igus.eu/ www.igus.eu/ 87

+ 1 - E/ e-chains ccessories Mounting brackets, polymer pivoting locking E/ e-chains ccessories KM mounting brackets ttachment on all sides pivoting locking...pz()+ /...1PZ()+ 1/...PZ() /...PZ() 17 1 1...1 / 1...1 1... / 1... Frontal view of KM 1, ø, 8 6,1 t = 7 8 8 8 8 8 = + 19, 8 9, 8,, = + 11 1 18 Polymer pivoting Recommended for unsupported and gliding applications tandard Polymer locking Recommended for vertical hanging and standing applications KM pivoting Recommended for unsupported and gliding applications KM locking Recommended for vertical hanging and standing applications pivoting: with without locking: with without Dim. KM pivoting: with without KM locking: with without Dim. Dim........7..9....1..PZ+.PZ+.PZ+ 7.PZ+ 9.PZ+.PZ+ 1.PZ+.PZ+.PZ+.PZ+ 7.PZ+ 9.PZ+.PZ+ 1.PZ+.1PZ+.1PZ+.1PZ+ 7.1PZ+ 9.1PZ+.1PZ+ 1.1PZ+.1PZ+.1PZ+.1PZ+ 7.1PZ+ 9.1PZ+.1PZ+ 1.1PZ+ 1 6 77 9 11 6 8 9 1.......7..9....1. 1..1Z 1..1Z 1..1Z 1.7.1Z 1.9.1Z 1..1Z 1.1.1Z 1..1 1..1 1..1 1.7.1 1.9.1 1..1 1.1.1 1..1Z 1..1Z 1..1Z 1.7.1Z 1.9.1Z 1..1Z 1.1.1Z 1..1 1..1 1..1 1.7.1 1.9.1 1..1 1.1.1 6 9 68 88 11 16 7 76 86 8 1 1 6 7 9 1 Full set with tiewrap plate + cable tiewraps, please add index K1+ e.g..pzk1+ (KM = Polymer Metal Mounting racket) 1 Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index 1..... PZ+ 1 must be indicated on preassembled configurations Full set pivoting = These attachment types are set automatically in the choice of the KM mounting bracket. For the preassembled mode please add index. 1.. 1Z must be indicated on preassembled configurations Full set with strain relief index KM pivoting Option: teel pivoting Part No.. - For e-chains and e-tubes available Pivoting connections One part (-piece) for all e-chain widths Electrically conductive train relief e.g. clamps,, nuggets and plug-in clips are available from stock. The complete chainfix range with order options from page 66 train relief e.g. clamps,, nuggets and plug-in clips are available from stock. The complete chainfix range with order options from page 66 88 D-CD files, configurators, PDF www.igus.eu/ www.igus.eu/ 89

E/ e-chains ccessories Interior separation New generation e-chains Further ccessories Extender crossbars Previous interior separation with optional elements www.igus.eu/ www.igus.eu/ X - 6 mm,9..d6 9,9..D6 /1.1 9, 1 ø6 1 1, ø6 1,,.1.1..1 No lateral spacing to side links necessary. s standard separators are assembled every nd e-chain link...1.x..1.xx 7 7, 119, Extender crossbars - Enormous increase of the interior for the smooth guiding of larger hoses. uitable for hoses with an outer diameter of 6 mm.,,.1. tandard separator, wide base unassembled assembled eparator, narrow head unassembled assembled.1.1.1...1 tandard - for any application eparator with a wide base for maximum locking strength and safe standing in e-chains. For even faster installation Firm hold to one side with a wide base, narrow on opposed side for easy cable assembly. Extender crossbars for e-chains snap-open Extender crossbars for e-chains snap-open R ending radii along inner radius. D6.R.. D6.R. along outer radius. D6.R.. D6.R. 7 7 119 * 7 1 1 17 * 7 1 1 17 *Radius only possible with e-chains eries upplement Part No. with required radius (R). Example:.D6.. Interior separation for extender crossbars,. eparator, narrow base unassembled assembled...1 For many thin cables eparator with a narrow base for a large number of thin cables side by side. aves space in e-chains., 7 1 /1.1 tandard separator, wide base unassembled /1.1 assembled /1.1.1 tandard separator, wide base For maximum locking strength and safe standing. In standard configuration separators are assembled every nd link., 1,, 6, X -1. eparator, asymmetrical unassembled. assembled..1 Full-width shelf, lockable unassembled.x assembled.x Lockable full-width shelves - for the standard interior separation X unassembled assembled X unassembled assembled X unassembled assembled 1.1.1.... 8.8.8.... 7.7.7 For side-mounted applications symmetrical separator, for defined distance. No additional spacers necessary. orizontal separation Full-width shelf locks safely into separators on both ends, fixed width possible. eparators can be moved freely over the shelf in horizontal direction. Can be used at one height. 6.6.6 6.6.6 6.6.6 7.7.7 7.7.7 77.77.77 8.8.8 87.87.87 9.9.9.... 1.1.1 1.1.1 1.1.1, X -1 Full-width shelf, lockable unassembled.x assembled.x eparator with integrated strain relief train relief separator Part No..Z can be integrated into the mounting bracket and can be placed at any point of the e-chain. It combines strain relief and interior separation, it can be installed on the first or last e-chain link and is easy to assemble without any screws. More information from page 676 Optional: upport tray kit - for support of the lower run imple one-piece support trays according to your requirements and specification Easy installation onto your machine, on profiles or wall-mount brackets igus support tray - available in types and options More information from page 7 orizontal separation Full-width shelf locks safely into separators on both ends, fixed width possible. eparators can be moved freely over the shelf in horizontal direction. Can be arranged at different heights. Product range left page 9 D-CD files, configurators, PDF www.igus.eu/ www.igus.eu/ 91

8... E/ e-tubes 8 Product range Chip protection...8 E/ e-tubes 8 Dimensions Unsupported applications hort travels Fill weight 8. 6... 1. FL D /8 66 Inner height mm 8 Pitch 6 mm/link Links/m (1 mm) Chain length / 1. / alf e-tubes eries snap-open along inner radius, closed along outer radius Full e-tubes eries 8 snap-open along inner radius, fully enclosed alf e-tubes snap-open along inner radius Full e-tubes snap-open along inner radius R ending radii 8. 1... Unsupported length / FL [m] Length of travel [m].. 6. R +6 6 - F = +..R...R...R.. 7.R.. 9.R...R.. 1.R. 8..R. 8..R. 8..R. 8. 7.R. 8. 9.R. 8..R. 8. 1.R. 8 7 77 89 1 1 7 9 119 11 * 7 1 1 17 * 7 1 1 17 * 7 1 1 17 * 7 1 1 17 * 7 1 1 17 * 7* 1 1 17 * 7 1 1 17,8,88,99 1,1 1, 1,7 1,,8,9 1, 1,17 1,6 1, 1, R * 7 1 1 17 1 18 8 8 8 D 1 16 187 1 7 6 87 1 7 K 6 8 6 6 7 8 88 The required clearance height: F = + mm (with 1, kg/m fill weight) *Radius available upon request, please consult igus for delivery time efore using eries /8 on long travels please consult igus. *Radius available upon request, please consult igus for delivery time Radii : the e-tube is not completely enclosed. Please consult igus upplement Part No. with required radius (R). Example:... Open e-chains in a flash with the igus e-chain opener Reduce assembly time from to sec. with the igus e-chain Opener. Open a long piece of e-chain in one go. Part No. 98.. for eries. For widths :, 7, 9 More information and video www.igus.eu/savetime 9 D-CD files, configurators, PDF www.igus.eu/ www.igus.eu/8 9

+ 1-8 E/ e-tubes 8 ccessories Mounting brackets, polymer pivoting locking E/ e-tubes 8 ccessories KM mounting brackets ttachment on all sides pivoting locking 8...PZ()+ /...1PZ()+ 1/...PZ() /...PZ() 17 1 = 1...1/11...1 = 1.../11... 8 = 81...1/811...1 8 = 81.../811... Frontal view of KM 1, ø, 8 6,1 t = 7 8 8 8 = + 19 9, = + 11 18 8 8, 8, 8, 1 Polymer pivoting Recommended for unsupported applications tandard Polymer locking Recommended for vertical hanging and standing applications.......7..9....1. 1 pivoting: with without.pz+.pz+.pz+ 7.PZ+ 9.PZ+.PZ+ 1.PZ+.PZ+.PZ+.PZ+ 7.PZ+ 9.PZ+.PZ+ 1.PZ+.1PZ+.1PZ+.1PZ+ 7.1PZ+ 9.1PZ+.1PZ+ 1.1PZ+ Full set with tiewrap plate + cable tiewraps, please add index K1+ Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index 1.... locking: with without.1pz+.1pz+.1pz+ 7.1PZ+ 9.1PZ+.1PZ+ 1.1PZ+ e.g..pzk1+. PZ+ 1 Dim. 1 6 77 9 11 6 8 9 1 must be indicated on preassembled configurations Full set pivoting = KM pivoting Recommended for unsupported applications KM locking Recommended for vertical hanging and standing applications.......7..9....1. KM pivoting: KM locking: Dim. Dim. with without with without 1 81..1Z 1 81..1 1 81..1Z 1 81..1 1 81..1Z 1 81..1 1 81.7.1Z 1 81.7.1 1 81.9.1Z 1 81.9.1 1 81..1Z 1 81..1 11 811..1Z 11 811..1 11 811..1Z 11 811..1 11 811..1Z 11 811..1 11 811.7.1Z 11 811.7.1 11 811.9.1Z 11 811.9.1 11 811..1Z 11 811..1 6 9 68 88 11 7 76 86 8 1 1 81.1.1Z 1 81.1.1 11 811.11Z 11 811.1.1 16 1 KM pivoting: Part No. 1... for half e-tube eries / Part No. 81... for full e-tube eries 8 KM locking: Part No. 11... for half e-tube eries / Part No. 811... for full e-tube eries 8 (KM = Polymer Metal Mounting racket) These attachment types are set automatically in the choice of the KM mounting bracket. For the preassembled mode please add index. 1.. 1Z 6 7 9 1 must be indicated on preassembled configurations Full set with strain relief index KM pivoting Option: teel pivoting Part No.. - For e-chains and e-tubes available Pivoting connections One part (-piece) for all e-chain widths Electrically conductive train relief e.g. clamps,, nuggets and plug-in clips are available from stock. The complete chainfix range with order options from page 66 train relief e.g. clamps,, nuggets and plug-in clips are available from stock. The complete chainfix range with order options from page 66 9 D-CD files, configurators, PDF www.igus.eu/ www.igus.eu/8 9

8 E/ e-tubes 8 ccessories Interior separation e-tubes Further ccessories Extender crossbars 8,9 9,9..D6..D6, 7, 11, 11, 9, 1 ø6 1 ø6 11 1.X No lateral spacing to side links necessary. s standard separators are assembled every nd e-chain link. 7 7, 119, Extender crossbars only for eries - Enormous increase of the interior for the smooth guiding of larger hoses. uitable for hoses with an outer diameter of 6 mm. lotted separator for e-tubes unassembled 1 assembled 11 lotted separator 1 Is used when vertical separation is required. Due to its slot, it allows basic vertical/horizontal shelving arrangements. Extender crossbars for half e-tubes snap-open along inner radius. D6.R.. D6.R. 7 7 119 R ending radii 7 1 1 17 7 1 1 17, X-1 Full-width shelves X unassembled assembled X unassembled assembled X unassembled assembled. 1. 77.77 1.77 1.1 1.1 8.8 1.8 7.7 1.7 Full-width shelf for e-tubes unassembled.x assembled 1.X 9.9 1.9. 1. Full-width shelf.x This option makes sense in applications with many thin cables with similar diameters. For a consequent subdivision. Fullwidth shelves can be arranged at different heights (in mm increments). upplement Part No. with required radius (R). Example:.D6.. eparator with integrated strain relief train relief separator Part No..ZR can be integrated into the mounting bracket and can be placed at any point of the e-chain. It combines strain relief and interior separation, it can be installed on the first or last e-chain link and is easy to assemble without any screws. More information from page 676 Optional: upport tray kit - for support of the lower run imple one-piece support trays according to your requirements and specification Easy installation onto your machine, on profiles or wall-mount brackets igus support tray - available in types and options More information from page 7 96 D-CD files, configurators, PDF www.igus.eu/ www.igus.eu/8 97

6 7...6 E/ e-chains 6 7 Product range Medium inner height, high stability...7 E/ e-chains 6 7 Dimensions Unsupported applications hort travels Fill weight 8. 6... 1. FL 7 6 66 76 Inner height mm 6 7 Pitch 6 mm/link Links/m 18 (8 mm) Chain length / 1. D / e-chains eries 6 snap-open along inner radius e-chains eries 7 snap-open along outer radius e-chains snap-open along inner radius e-chains snap-open along outer radius R ending radii 6 7. 1... Unsupported length / FL [m] Length of travel [m].. 6. R +6 6 - F = + 6..R. 6. 6.R. 6. 7.R. 6. 9.R. 6..R. 6. 1.R. 6. 1.R. 6. 17.R. 7..R. 1) 7. 6.R. 1) 7. 7.R. 1) 7. 9.R. 1) 7..R. 1) 7. 1.R. 1) 7. 1.R. 7. 17.R. 6 7 9 1 1 17 66 81 91 6 116 11 166 19 6 7 1 1 17 6 7 1 1 17 6 7 1 1 17 6 7 1 1 17 6 7 1 1 17 6 7 1 1 17 6 7 1 1 17 6 7 1 1 17 1) ED/TEX version available from stock alf e-tubes, eries 6 and full e-tubes eries 68 from page Non snap-open e-chains E medium classics, eries 6 www.igus.eu/6 upplement Part No. with required radius (R). Example: 7... 1,17 1, 1, 1,7 1,9 1,8 1,6 1,8 1,17 1, 1, 1,7 1,9 1,8 1,6 1,8 R 6 7 1 1 17 176 D 17 18 9 9 8 9 9 K 8 66 7 9 The required clearance height: F = + mm (with, kg/m fill weight) efore using eries 6 on long travels please consult igus. Gliding applications Long travels from m to 1 m / CL = Offset fixed point / K D R ED/TEX permanently conductive e-chains - 7 several widths with delivery from stock: Inner widths - 1, radii R 6-1. Full ED product range www.igus.eu/ed Guide trough with glide bar Guide trough without glide bar RI Total length of guide trough Note: For long travel (gliding) applications, please consult igus. For long travels, igus specifies eries 7 that snaps open along the outer radius. In case of travels between and m we recommend a longer unsupported length. Chain length / Open e-chains in a flash with the igus e-chain opener Reduce assembly time from to sec. with the igus e-chain Opener. Open a long piece of e-chain in one go. Part No. 98..6 for eries 6/7. For widths : 6, 7, 9, More information and video www.igus.eu/savetime R 6 7 1 1 17 1 1 166 166 166 166 166 166 D + 1 1 7 6 77 9 K 7 616 78 896 11 188 16 CL 1 7 6 9 efore using eries 6 on long travels please consult igus. 98 D-CD files, configurators, PDF www.igus.eu/6 www.igus.eu/7 99

11, + + 6 7 E/ e-chains 6 7 ccessories Mounting brackets, polymer pivoting locking E/ e-chains 6 7 ccessories KM mounting brackets ttachment on all sides pivoting locking 6 7 6...PZ() / 6...1PZ() 6...PZ() / 6...PZ() 16/ 17 17 Frontal view 61...1 / 61...1 61... / 61... of KM ø, ø, t = 8 6,1 t = 8 8-8- + 19 = + 8 = + 8 = + 19 = - 6 + 8 = 17 17 8 8, 7 7 8, 19 Polymer pivoting Recommended for unsupported and gliding applications tandard Polymer locking Recommended for vertical hanging and standing applications KM pivoting Recommended for unsupported and gliding applications KM locking Recommended for vertical hanging and standing applications pivoting: with without locking: with without Dim. KM pivoting: with C-profile without C-profile KM locking: with C-profile without C-profile Dim. Dim....6..7..9....1..1..17. 6.PZ 66.PZ 67.PZ 69.PZ 6.PZ 61.PZ 61.PZ 617.PZ 6.PZ 66.PZ 67.PZ 69.PZ 6.PZ 61.PZ 61.PZ 617.PZ 6.1PZ 66.1PZ 67.1PZ 69.1PZ 6.1PZ 61.1PZ 61.1PZ 617.1PZ 6.1PZ 66.1PZ 67.1PZ 69.1PZ 6.1PZ 61.1PZ 61.1PZ 617.1PZ 7 8 1 1 7 9 1 1 17...6..7..9....1..1..17. 61..1.C 61.6.1.C 61.7.1.C 61.9.1.C 61..1.C 61.1.1.C 61.1.1.C 61.17.1.C 61..1 61.6.1 61.7.1 61.9.1 61..1 61.1.1 61.1.1 61.17.1 61..1.C 61.6.1.C 61.7.1.C 61.9.1.C 61..1.C 61.1.1.C 61.1.1.C 61.17.1.C 61..1 61.6.1 61.7.1 61.9.1 61..1 61.1.1 61.1.1 61.17.1 8 7 8 98 8 1 18 18 69 8 9 9 119 1 169 19 Full set with tiewrap plate + cable tiewraps, please add index K1 1 Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index 1.... e.g. 6.PZK1 6. PZ 1 must be indicated on preassembled configurations Full set pivoting = KM pivoting to one side: 61... / 61... (KM = Polymer Metal Mounting racket) These attachment types are set automatically in the choice of the KM mounting bracket. For the preassembled mode please add index. 61.. 1.C must be indicated on preassembled configurations Full set with integrated C-profile index KM pivoting Option: teel locking Part No. 6.1 - For e-chains and e-tubes available Locked connections One part (-piece) for all e-chain widths Electrically conductive train relief e.g. clamps,, nuggets and plug-in clips are available from stock. The complete chainfix range with order options from page 66 train relief e.g. clamps,, nuggets and plug-in clips are available from stock. The complete chainfix range with order options from page 66 D-CD files, configurators, PDF www.igus.eu/6 www.igus.eu/7 1

6 7 E/ e-chains 6 7 ccessories Interior separation New generation Previous interior separation with optional elements www.igus.eu/6 www.igus.eu/7 e-chains 6 7 Further ccessories Extender crossbars 6 7 X - 6 mm (X - 1 mm) 6 7.7.D8 11 7.1.D8 /6.1 18,1 7.1.D8 /6.1,, 17, 17, 7 ø8 6 ø8 ø8.1.1..1 New..1 No lateral spacing to side links necessary. s standard separators are assembled every nd e-chain link. 1 1 7 1 1, 7 X -1.1.... tandard separator, wide base unassembled.1 assembled.1.1 eparator, narrow head unassembled assembled eparator, narrow base unassembled assembled...1...1 eparator, asymmetrical unassembled. assembled..1 Notch separator, lockable unmontiert. montiert..1 Full-width shelf, lockable unassembled.x assembled.x..1.x..1 tandard - for any application eparator with a wide base for maximum locking strength and safe standing in e-chains. For even faster installation Firm hold to one side with a wide base, narrow on opposed side for easy cable assembly. For many thin cables eparator with a narrow base for a large number of thin cables side by side. aves space in e-chains. For side-mounted applications symmetrical separator, for defined distance. No additional spacers necessary. New in this catalogue Locks safely in, mm increments Notch separator for exact positioning in e-chains. Recommended for side-mounted applications. orizontal separation Full-width shelf locks safely into separators on both ends, fixed width possible. To be used as full-width shelf for a consequent subdivision or as shelf for a pattern system in levels. 6. 7 D8.R. 6. 1 D8.R. 6. 1 D8.R. 7 91, 1 7. 7 D8.R. 7. 1 D8.R. 7. 1 D8.R., 68 6 X -1 /6.1 1 11, 7 1 1 unassembled /6.1 assembled /6.1.1.X Extender crossbars - Enormous increase of the interior for the smooth guiding of larger hoses. uitable for hoses with an outer diameter of 8 mm. Extender crossbars for e-chains snap-open along inner radius Extender crossbars for e-chains snap-open along outer radius *Radius only possible with e-chains eries 7 91 11 166 upplement Part No. with required radius (R). Example: 7.1D8.. Interior separation for extender crossbars tandard separator, wide base Full-width shelf, lockable unassembled.x assembled.x eparator with integrated strain relief train relief separator Part No. 6.Z can be integrated into the mounting bracket and can be placed at any point of the e-chain. It combines strain relief and interior separation, it can be installed on the first or last e-chain link and is easy to assemble without any screws. More information from page 676 R ending radii 1 166,.X 6* 7* 1 1 17 6* 7* 1 1 17 6* 7* 1 1 17 tandard separator, wide base For maximum locking strength and safe standing. In standard configuration separators are assembled every nd link. orizontal separation Full-width shelf locks safely into separators on both ends, fixed width possible. eparators can be moved freely over the shelf in horizontal direction. Can be arranged at different heights. Lockable fullwidth shelves X unassembled assembled X unassembled assembled X unassembled assembled.. 1.1.1.. 7.7.7 1.1.1.... 17.17.17 11.11.11.. Optional: upport tray kit - for support of the lower run imple one-piece support trays according to your requirements and specification Easy installation onto your machine, on profiles or wall-mount brackets igus support tray - available in types and options More information from page 7 D-CD files, configurators, PDF www.igus.eu/6 www.igus.eu/7

6 68...6 E/ e-tubes 6 68 Product range Chip protection...68 E/ e-tubes 6 68 Dimensions Unsupported applications hort travels Fill weight 8. 6... 1. FL 6/68 66 Inner height mm 6 68 Pitch 6 mm/link Links/m 18 (8 mm) Chain length / 1. D / alf e-tubes eries 6 snap-open along inner radius, closed along outer radius Full e-tubes eries 68 snap-open along inner radius, fully enclosed alf e-tubes snap-open along inner radius Full e-tubes snap-open along inner radius R ending radii 6 68. 1... Unsupported length / FL [m] Length of travel [m].. 6. R +6 6 - F = + 6..R. 6. 6.R. 6. 7.R. 6. 9.R. 6..R. 6. 1.R. 6. 1.R. 6. 17.R. 68..R. 68. 6.R. 68. 7.R. 68. 9.R. 68..R. 68. 1.R. 68. 1.R. 68. 17.R. 6 7 9 1 1 17 66 81 91 6 116 11 166 19 6* 7* 1 1 17 6* 7* 1 1 17 6* 7* 1 1 17 6* 7* 1 1 17 6* 7* 1 1 17 6* 7* 1 1 17 6* 7* 1 1 17 6* 7* 1 1 17 1, 1,6 1, 1, 1,61 1,7 1,8, 1, 1, 1,1 1,6 1,81 1,99,17, R 6* 7* 1 1 17 176 D 17 18 9 9 8 9 9 K 8 66 7 9 The required clearance height: F = + mm (with, kg/m fill weight) *Radius available upon request, please consult igus for delivery time efore using eries 6/68 on long travels please consult igus. *Radius available upon request, please consult igus for delivery time Radii 6, 7: the e-tube is not completely enclosed. Please consult igus upplement Part No. with required radius (R). Example: 6... Open e-chains in a flash with the igus e-chain opener Reduce assembly time from to sec. with the igus e-chain Opener. Open a long piece of e-chain in one go. Part No. 98..6 for eries 6. For widths : 6, 7, 9, More information and video www.igus.eu/savetime D-CD files, configurators, PDF www.igus.eu/6 www.igus.eu/68

11, + + 6 68 E/ e-tubes 6 68 ccessories Mounting brackets, polymer pivoting locking E/ e-tubes 6 68 ccessories KM mounting brackets ttachment on all sides pivoting locking 6 68 6...PZ() / 6...1PZ() 6...PZ() / 6...PZ() 16/ 17 17 6 = 6...1/6...1 6 = 6.../6... 68 = 68...1/68...1 68 = 68.../68... ø, Frontal view of KM ø, t = 8 6,1 t = 8 8-8- + 19 = + 8 = + 8 = + 19 = - 6 + 8 = 8 17 17 8 8, 7 7 8, 19 Polymer pivoting Recommended for unsupported applications tandard Polymer locking Recommended for vertical hanging and standing applications...6..7..9....1..1..17. 1 pivoting: with without 6.PZ 66.PZ 67.PZ 69.PZ 6.PZ 61.PZ 61.PZ 617.PZ 6.PZ 66.PZ 67.PZ 69.PZ 6.PZ 61.PZ 61.PZ 617.PZ locking: with without 6.1PZ 66.1PZ 67.1PZ 69.1PZ 6.1PZ 61.1PZ 61.1PZ 617.1PZ Full set with tiewrap plate + cable tiewraps, please add index K1 Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index 1.... 6.1PZ 66.1PZ 67.1PZ 69.1PZ 6.1PZ 61.1PZ 61.1PZ 617.1PZ e.g. 6.PZK1 6. PZ 1 Dim. 7 8 1 1 7 9 1 1 17 must be indicated on preassembled configurations Full set pivoting = KM pivoting Recommended for unsupported applications KM locking Recommended for vertical hanging and standing applications...6..7..9....1..1..17. KM pivoting: with C-profile without C-profile 6 68..1.C 6 68..1 6 68.6.1.C 6 68.6.1 6 68.7.1.C 6 68.7.1 6 68.9.1.C 6 68.9.1 6 68..1.C 6 68..1 6 68.1.1.C 6 68.1.1 6 68.1.1.C 6 68.1.1 6 68.17.1.C 6 68.17.1 KM locking: with C-profile without C-profile 6 68..1.C 6 68..1 6 68.6.1.C 6 68.6.1 6 68.7.1.C 6 68.7.1 6 68.9.1.C 6 68.9.1 6 68..1.C 6 68..1 6 68.1.1.C 6 68.1.1 6 68.1.1.C 6 68.1.1 6 68.17.1.C 6 68.17.1 KM pivoting: Part No. 6... for half e-tube eries 6 / Part No. 68... for full e-tube eries 68 KM locking: Part No. 6... for half e-tube eries 6 / Part No. 68... for full e-tube eries 68 (KM = Polymer Metal Mounting racket) These attachment types are set automatically in the choice of the KM mounting bracket. For the preassembled mode please add index. 6.. 1.C Dim. 8 7 8 98 8 1 18 18 69 8 9 9 119 1 169 19 must be indicated on preassembled configurations Full set with integrated C-profile index KM pivoting Dim. Option: teel locking Part No. 6.1 - For e-chains and e-tubes available Locked connections One part (-piece) for all e-chain widths Electrically conductive train relief e.g. clamps,, nuggets and plug-in clips are available from stock. The complete chainfix range with order options from page 66 train relief e.g. clamps,, nuggets and plug-in clips are available from stock. The complete chainfix range with order options from page 66 6 D-CD files, configurators, PDF www.igus.eu/6 www.igus.eu/68 7

6 68 E/ e-tubes 6 68 ccessories Interior separation New generation New in this catalogue for e-tubes Previous interior separation with optional elements www.igus.eu/6 www.igus.eu/68 e-tubes 6 Further ccessories Extender crossbars 6 68 X - 6 mm (X - 1 mm) 6 7.7.D8 11 7.1.D8 /6.1 18,1 7.1.D8 /6.1,, 17, 17, 7 ø8 6 ø8 ø8.1.1..1 New..1 No lateral spacing to side links necessary. s standard separators are assembled every nd e-chain link. 1 1 7 1 1, 7 X -1.1.... tandard separator, wide base unassembled.1 assembled.1.1 eparator, narrow head unassembled assembled eparator, narrow base unassembled assembled...1...1 eparator, asymmetrical unassembled. assembled..1 Notch separator, lockable unmontiert. montiert..1 Full-width shelf, lockable unassembled.x assembled.x..1.x..1 tandard - for any application eparator with a wide base for maximum locking strength and safe standing in e-chains. For even faster installation Firm hold to one side with a wide base, narrow on opposed side for easy cable assembly. For many thin cables eparator with a narrow base for a large number of thin cables side by side. aves space in e-chains. For side-mounted applications symmetrical separator, for defined distance. No additional spacers necessary. New in this catalogue Locks safely in, mm increments Notch separator for exact positioning in e-chains. Recommended for side-mounted applications. orizontal separation Full-width shelf locks safely into separators on both ends, fixed width possible. To be used as full-width shelf for a consequent subdivision or as shelf for a pattern system in levels. Extender crossbars for half e-tubes snap-open along inner radius 6. 7 D8.R. 6. 1 D8.R. 6. 1 D8.R. 7 91, 1, 68 6 X -1 /6.1 1 11, Extender crossbars only for eries 6 - Enormous increase of the interior for the smooth guiding of larger hoses. uitable for hoses with an outer diameter of 8 mm. 7 1 1 tandard separator, wide base unassembled /6.1 assembled /6.1.1 Full-width shelf, lockable unassembled.x assembled.x.x 91 11 166 upplement Part No. with required radius (R). Example: 6.1D8.. Interior separation for extender crossbars Optional: upport tray kit - for support of the lower run imple one-piece support trays according to your requirements and specification Easy installation onto your machine, on profiles or wall-mount brackets igus support tray - available in types and options More information from page 7 R ending radii 1 166, 1 1 17 1 1 17 1 1 17.X tandard separator, wide base For maximum locking strength and safe standing. In standard configuration separators are assembled every nd link. orizontal separation Full-width shelf locks safely into separators on both ends, fixed width possible. eparators can be moved freely over the shelf in horizontal direction. Can be arranged at different heights. Lockable fullwidth shelves.. 7.7.7.. 11.11.11 1.1.1 1.1.1 17.17.17...... 8 D-CD files, configurators, PDF www.igus.eu/6 www.igus.eu/68 9

... E/ e-chains Product range Large inner height, high stability... E/ e-chains Dimensions Unsupported applications hort travels Fill weight 8. 6... 1. FL 6 66 78 Inner height mm Pitch 67 mm/link Links/m 1 ( mm) Chain length / 1. D / e-chains eries snap-open along inner radius e-chains eries snap-open along outer radius e-chains snap-open along inner radius e-chains snap-open along outer radius R ending radii. 1... Unsupported length / FL [m] Length of travel [m].. 6. R +6 67 6-6 F = +..R.. 7.R...R.. 11.R.. 1.R.. 1.R.. 17.R...R...R...R...R.. 7.R...R.. 11.R.. 1.R.. 1.R.. 17.R...R...R...R. 7 11 1 1 17 7 9 1 1 1 17 19 7 7 1 1 7 1 1 7 1 1 7 1 1 7 1 1 7 1 1 7 1 1 7 1 1 7 1 1 7 1 1 alf e-tubes, eries and full e-tubes eries 8 from page 16 upplement Part No. with required radius (R). Example:.7.. 1,6 1,78 1,9 1,99,,17,8,,9,7 1,6 1,78 1,9 1,99,,17,8,,9,7 R 7 1 1 1 6 1 6 6 6 66 D 8 8 8 8 K 7 6 76 9 8 The required clearance height: F = + mm (with, kg/m fill weight) efore using eries on long travels please consult igus. Gliding applications Long travels from m to 1 m / CL = Offset fixed point / K D R Guide trough with glide bar Guide trough without glide bar RI Total length of guide trough Note: For long travel (gliding) applications, please consult igus. For long travels, igus specifies eries that snaps open along the outer radius. In case of travels between 6 and m we recommend a longer unsupported length. Chain length / Open e-chains in a flash with the igus e-chain opener Reduce assembly time from to sec. with the igus e-chain Opener. Open a long piece of e-chain in one go. Part No. 98.. for eries /. For widths :, 7,, 11. More information and video www.igus.eu/savetime R 7 1 1 1 186 186 186 186 186 D + 8 7 7 78 11 K 7 8 1 167 19 CL 6 6 7 efore using eries on long travels please consult igus. D-CD files, configurators, PDF www.igus.eu/ www.igus.eu/ 11

E/ e-chains ccessories Mounting brackets, polymer pivoting locking E/ e-chains ccessories KM mounting brackets ttachment on all sides pivoting locking...pz() /...1PZ()...PZ() /...PZ() Frontal view 1/1...1 1/1... of KM 16/ 17 17 ø, ø, t = 8 8, t = 8 + = +1 = +1 = + = +1 = 7 8 6 6 1 8 8 1 Polymer pivoting Recommended for unsupported and gliding applications tandard Polymer locking Recommended for vertical hanging and standing applications...7....11..1..1..17....... 1 pivoting: with without.pz 7.PZ.PZ 11.PZ 1.PZ 1.PZ 17.PZ.PZ.PZ.PZ.PZ 7.PZ.PZ 11.PZ 1.PZ 1.PZ 17.PZ.PZ.PZ.PZ locking: with without.1pz 7.1PZ.1PZ 11.1PZ 1.1PZ 1.1PZ 17.1PZ.1PZ.1PZ.1PZ Full set with tiewrap plate + cable tiewraps, please add index K1 Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index 1.....1PZ 7.1PZ.1PZ 11.1PZ 1.1PZ 1.1PZ 17.1PZ.1PZ.1PZ.1PZ e.g..pzk1 7. PZ 1 Dim. 8 78 9 18 1 178 8 7 11 1 1 17 must be indicated on preassembled configurations Full set pivoting = KM pivoting Recommended for unsupported and gliding applications KM locking Recommended for vertical hanging and standing applications...7....11..1..1..17....... KM pivoting: with C-profile without C-profile 1..1.C 1..1 1.7.1.C 1.7.1 1..1.C 1..1 1.11.1.C 1.11.1 1.1.1.C 1.1.1 1.1.1.C 1.1.1 1.17.1.C 1.17.1 1..1.C 1..1 1..1.C 1..1 1..1.C 1..1 KM pivoting to one side: 1... / 1... (KM = Polymer Metal Mounting racket) KM locking: with C-profile without C-profile 1..1.C 1..1 1.7.1.C 1.7.1 1..1.C 1..1 1.11.1.C 1.11.1 1.1.1.C 1.1.1 1.1.1.C 1.1.1 1.17.1.C 1.17.1 1..1.C 1..1 1..1.C 1..1 1..1.C 1..1 These attachment types are set automatically in the choice of the KM mounting bracket. For the preassembled mode please add index. 1. 7. 1.C Dim. 6 88 11 18 18 16 188 1 8 6 Dim. 7 99 1 19 19 17 199 9 7 must be indicated on preassembled configurations Full set with integrated C-profile index KM pivoting Option: teel pivoting Part No..1 - For e-chains and e-tubes available Pivoting connections One part (-piece) for all e-chain widths Electrically conductive train relief e.g. clamps,, nuggets and plug-in clips are available from stock. The complete chainfix range with order options from page 66 train relief e.g. clamps,, nuggets and plug-in clips are available from stock. The complete chainfix range with order options from page 66 1 D-CD files, configurators, PDF www.igus.eu/ www.igus.eu/ 1

E/ e-chains ccessories Interior separation New generation e-chains Further ccessories Extender crossbars Previous interior separation with optional elements www.igus.eu/ www.igus.eu/ X - 6 mm (X - 1 mm)..d8 88 188..D8.XX /8.1,,, 99, 8 ø8 ø8.1.1..1..1.x..1 1 No lateral spacing to side links necessary. s standard separators are assembled every nd e-chain link. Extender crossbars - Enormous increase of the interior for the smooth guiding of larger hoses. uitable for hoses with an outer diameter of 8 mm. 1 1.1. tandard separator, wide base unassembled assembled eparator, narrow head unassembled assembled.1.1.1...1 tandard - for any application eparator with a wide base for maximum locking strength and safe standing in e-chains. For even faster installation Firm hold to one side with a wide base, narrow on opposed side for easy cable assembly. Extender crossbars for e-chains snap-open Extender crossbars for e-chains snap-open R ending radii along inner radius. D8.R.. D8.R. along outer radius. D8.R.. D8.R. 1 7* * 1 1 7* * 1 1 *Radius 7 and only possible with e-chains eries upplement Part No. with required radius (R). Example:.D8.. Interior separation for extender crossbars 7. eparator, narrow base unassembled assembled...1 For many thin cables eparator with a narrow base for a large number of thin cables side by side. aves space in e-chains. 1 9 8 /8.1 tandard separator, wide base unassembled /8.1 assembled /8.1.1 tandard separator, wide base For maximum locking strength and safe standing. In standard configuration separators are assembled every nd link.. 1, 9 X -1. eparator, asymmetrical unassembled. assembled..1 Full-width shelf, lockable unassembled.x assembled.x Lockable full-width shelves - for the standard interior separation X unassembled assembled X unassembled assembled X unassembled assembled.. 7.7.7.. 11.11.11 For side-mounted applications symmetrical separator, for defined distance. No additional spacers necessary. orizontal separation Full-width shelf locks safely into separators on both ends, fixed width possible. To be used as full-width shelf for a consequent subdivision or as shelf for a pattern system in levels. 1.1.1 1.1.1 17.17.17......, X -1 Full-width shelf, lockable unassembled.x assembled.x eparator with integrated strain relief train relief separator Part No. 1.Z can be integrated into the mounting bracket and can be placed at any point of the e-chain. It combines strain relief and interior separation, it can be installed on the first or last e-chain link and is easy to assemble without any screws. More information from page 676 Optional: upport tray kit - for support of the lower run imple one-piece support trays according to your requirements and specification Easy installation onto your machine, on profiles or wall-mount brackets igus support tray - available in types and options More information from page 7 orizontal separation Full-width shelf locks safely into separators on both ends, fixed width possible. eparators can be moved freely over the shelf in horizontal direction. Can be arranged at 7 different heights. 1 D-CD files, configurators, PDF www.igus.eu/ www.igus.eu/ 1

8... E/ e-tubes 8 Product range Chip protection...8 E/ e-tubes 8 Dimensions Unsupported applications hort travels Fill weight 8. 6... 1. FL /8 6 66 Inner height mm 8 Pitch 67 mm/link Links/m 1 ( mm) Chain length / 1. D / alf e-tubes eries snap-open along inner radius, closed along outer radius Full e-tubes eries 8 snap-open along inner radius, fully enclosed alf e-tubes snap-open along inner radius Full e-tubes snap-open along inner radius R ending radii 8. 1... Unsupported length / FL [m] Length of travel [m].. 6. R +6 67 6-6 F = +..R.. 7.R...R.. 11.R.. 1.R.. 1.R.. 17.R...R...R...R. 8..R. 8. 7.R. 8..R. 8. 11.R. 8. 1.R. 8. 1.R. 8. 17.R. 8..R. 8..R. 8..R. 7 11 1 1 17 7 9 1 1 1 17 19 7 7* * 1 1 7* * 1 1 7* * 1 1 7* * 1 1 7* * 1 1 7* * 1 1 7* * 1 1 7* * 1 1 7* * 1 1 7* * 1 1 1,77 1,9,1,,,6,7,9,1, 1,96,7,,6,9,6,8,9,1,8 R 7* * 1 1 1 6 1 6 6 6 66 D 8 8 8 8 K 7 6 76 9 8 The required clearance height: F = + mm (with, kg/m fill weight) *Radius available upon request, please consult igus for delivery time efore using eries /8 on long travels please consult igus. *Radius available upon request, please consult igus for delivery time Radii 7, : the e-tube is not completely enclosed. Please consult igus upplement Part No. with required radius (R). Example:.7.. Open e-chains in a flash with the igus e-chain opener Reduce assembly time from to sec. with the igus e-chain Opener. Open a long piece of e-chain in one go. Part No. 98.. for eries. For widths :, 7,, 11. More information and video www.igus.eu/savetime 16 D-CD files, configurators, PDF www.igus.eu/ www.igus.eu/8 17

8 E/ e-tubes 8 ccessories Mounting brackets, polymer pivoting locking E/ e-tubes 8 ccessories KM mounting brackets ttachment on all sides pivoting locking 8...PZ() /...1PZ()...PZ() /...PZ() 16/ 17 17 = /...1 = /... 8 = 8/8...1 8 = 8/8... ø, Frontal view of KM ø, t = 8 8, t = 8 + = +1 = +1 = + = +1 = 7 8 6 6 1 8 8 1 Polymer pivoting Recommended for unsupported applications tandard Polymer locking Recommended for vertical hanging and standing applications...7....11..1..1..17....... 1 pivoting: locking: with without with without.pz 7.PZ.PZ 11.PZ 1.PZ 1.PZ 17.PZ.PZ.PZ.PZ.PZ 7.PZ.PZ 11.PZ 1.PZ 1.PZ 17.PZ.PZ.PZ.PZ.1PZ 7.1PZ.1PZ 11.1PZ 1.1PZ 1.1PZ 17.1PZ.1PZ.1PZ.1PZ Full set with tiewrap plate + cable tiewraps, please add index K1 Possible installation conditions for assembled mounting brackets. For the preassembled mode please add index 1.....1PZ 7.1PZ.1PZ 11.1PZ 1.1PZ 1.1PZ 17.1PZ.1PZ.1PZ.1PZ e.g..pzk1 7. PZ 1 Dim. 8 78 9 18 1 178 8 7 11 1 1 17 must be indicated on preassembled configurations Full set pivoting = KM pivoting Recommended for unsupported applications KM locking Recommended for vertical hanging and standing applications KM pivoting: KM locking: Dim. Dim. with C-profile without C-profile with C-profile without C-profile...7....11..1..1..17....... 8..1.C 8.7.1.C 8..1.C 8.11.1.C 8.1.1.C 8.1.1.C 8.17.1.C 8..1.C 8..1.C 8..1.C 8..1 8.7.1 8..1 8.11.1 8.1.1 8.1.1 8.17.1 8..1 8..1 8..1 8..1.C 8.7.1.C 8..1.C 8.11.1.C 8.1.1.C 8.1.1.C 8.17.1.C 8..1.C 8..1.C 8..1.C 8..1 8.7.1 8..1 8.11.1 8.1.1 8.1.1 8.17.1 8..1 8..1 8..1 6 88 11 18 18 16 188 1 8 6 7 99 1 19 19 17 199 9 7 KM pivoting: Part No.... for half e-tube eries / Part No. 8... for full e-tube eries 8 KM locking: Part No.... for half e-tube eries / Part No. 8... for full e-tube eries 8 (KM = Polymer Metal Mounting racket) These attachment types are set automatically in the choice of the KM mounting bracket. For the preassembled mode please add index.. 7. 1.C must be indicated on preassembled configurations Full set with integrated C-profile index KM pivoting Option: teel pivoting Part No..1 - For e-chains and e-tubes available Pivoting connections One part (-piece) for all e-chain widths Electrically conductive train relief e.g. clamps,, nuggets and plug-in clips are available from stock. The complete chainfix range with order options from page 66 train relief e.g. clamps,, nuggets and plug-in clips are available from stock. The complete chainfix range with order options from page 66 18 D-CD files, configurators, PDF www.igus.eu/ www.igus.eu/8 19

8 E/ e-tubes 8 ccessories Interior separation New generation e-tubes Further ccessories Extender crossbars 8 Previous interior separation with optional elements www.igus.eu/ www.igus.eu/8 X - 6 mm (X - 1 mm)..d8 88 188..D8.XX /8.1 99, 8 ø8 ø8,,,.1.1..1 No lateral spacing to side links necessary. s standard separators are assembled every nd e-chain link...1.x..1 1 Extender crossbars only for eries - Enormous increase of the interior for the smooth guiding of larger hoses. uitable for hoses with an outer diameter of 8 mm. 1.1 tandard separator, wide base unassembled.1 assembled.1.1 tandard - for any application eparator with a wide base for maximum locking strength and safe standing in e-chains. Extender crossbars for half e-tubes snap-open along inner radius. D8.R.. D8.R. 1 R ending radii 1 1 1 1 1. eparator, narrow head unassembled assembled...1 For even faster installation Firm hold to one side with a wide base, narrow on opposed side for easy cable assembly. upplement Part No. with required radius (R). Example:.D8.. Interior separation for extender crossbars 7. eparator, narrow base unassembled assembled...1 For many thin cables eparator with a narrow base for a large number of thin cables side by side. aves space in e-chains. 1 9 8 /8.1 tandard separator, wide base unassembled /8.1 assembled /8.1.1 tandard separator, wide base For maximum locking strength and safe standing. In standard configuration separators are assembled every nd link.. 1, 9 X -1. eparator, asymmetrical unassembled. assembled..1 Full-width shelf, lockable unassembled.x assembled.x Lockable full-width shelves - for the standard interior separation X unassembled assembled X unassembled assembled X unassembled assembled.. 7.7.7.. 11.11.11 For side-mounted applications symmetrical separator, for defined distance. No additional spacers necessary. orizontal separation Full-width shelf locks safely into separators on both ends, fixed width possible. To be used as full-width shelf for a consequent subdivision or as shelf for a pattern system in levels. 1.1.1 1.1.1 17.17.17......, X -1 Full-width shelf, lockable unassembled.x assembled.x eparator with integrated strain relief train relief separator Part No. 1.Z can be integrated into the mounting bracket and can be placed at any point of the e-chain. It combines strain relief and interior separation, it can be installed on the first or last e-chain link and is easy to assemble without any screws. More information from page 676 Optional: upport tray kit - for support of the lower run imple one-piece support trays according to your requirements and specification Easy installation onto your machine, on profiles or wall-mount brackets igus support tray - available in types and options More information from page 7 orizontal separation Full-width shelf locks safely into separators on both ends, fixed width possible. eparators can be moved freely over the shelf in horizontal direction. Can be arranged at 7 different heights. D-CD files, configurators, PDF www.igus.eu/ www.igus.eu/8 1

E medium eries Product range mall pitch, smooth running E medium eries Dimensions Unsupported applications hort travels 66 7... Fill weight 8. 6... 1. Inner height mm Pitch 7,8 mm/link Links/m 6 (,8 mm) Chain length / 1. FL D / eries nap-open along outer radius nap-open along inner radius R ending radii Weight. 1... Unsupported length / FL [m] Length of travel [m].. 6. R +6 7,8 - F = +..R...R.. 7.R...R. 8 7 77 7 9 119 7 1 1 17 7 1 1 17 7 1 1 17 7 1 1 17,81,9 1,1 1,1 R 7 1 1 17 + 1 18 8 8 8 D 11 1 19 18 9 9 8 9 K 9 7 6 68 76 8 The required clearance height: F = + mm (with 1, kg/m fill weight) Gliding applications Long travels from m to m / / D upplement Part No. with required radius (R). Example:... CL = Offset fixed point K R Guide trough with glide bar Guide trough without glide bar RI Total length of guide trough Note: For long travel (gliding) applications, please consult igus. In case of travels between and m we recommend a longer unsupported length. Chain length / R 7 1 1 17 1 1 D + 11 1 8 9 7 66 7 11 K 9 61 86 9 111 1 16 1779 CL 7 7 97 * 8 *Values upon request D-CD files, configurators, PDF www.igus.eu/

2024 © autodocbox.com Privacy Policy | Terms of Service | Feedback