LOAD. RETRACT. LOCK. ROLL CLOSED with quick, clamp-on installation. These rugged covers are designed to accommodate fifth-wheel hitches with plenty of room left over to store tools and extra cargo. Installed and serviced by North America s largest dealer network, Pace Edwards retractable covers are covered by our industry-leading warranties. ROLL OPEN With a Pace Edwards Retractable Truck Bed Cover, you have the option of riding with an open truck bed or with a secure, locked cover for your cargo. And in addition to security, a Pace Edwards cover increases your fuel efficiency by improving the aerodynamics of your truck. All Pace Edwards covers roll and stow inside a tough, protective canister behind the cab
Armor Tek Vinyl over aluminum panel Powder coated aluminum extrusion Powder coated aluminum extrusion Armor Tek Vinyl over aluminum panel INSTALL. REMOVE. REPEAT. SWITCHBLADE Install quickly and easily Remove just as easily for full bed access Retracts in seconds Solid cover security Allows full rear visibility No bulky panels Requires only a Phillips screwdriver and 7/16" wrench to install and remove One-year warranty TOTAL REMOTE CONTROL BEDLOCKER ELECTRIC Hands-free, remote operation Powerful electric motor wires to your truck battery Cover opens/closes in less than 30 seconds can stop at any point Heavy-duty, powder-coated aluminum exterior with low-profile blanket design Retracts into a canister box at the front of the truck bed Manual override release lever provides back up in case of lost remotes or dead batteries No-drill installation TOUGH, COATED ALUMINUM DECK FULL-METAL JACKRABBIT Retracts into a canister box at the front of the truck bed when you turn the lock knob Tough, powder-coated aluminum exterior Easy maintenance low-profile design Closes easily with a built-in pull strap can be key-locked along the rail every 12 inches Clamps come standard on most applications (no drill required) watch the videos online! HARD-COVER SECURITY, SOFT-TOP LOOK. THE ORIGINAL JACKRABBIT Retracts into a canister box at the front of the truck bed when you turn the lock knob Strong aluminum panels with ArmorTek automotive-grade, polymer-vinyl exterior Low-profile design Closes easily with a built-in pull strap can be key-locked along the rail every 12 inches Clamps come standard on most applications (no drill required) watch the videos online CUSTOMIZE YOUR RIDE ACCESSORIES TO MAKE YOUR COVER FIT YOU EXPLORER SERIES RAILS Increase cargo capacity above the cover Fits many brands of racking components CONTRACTOR RIG RACK Aluminum extension beams support longer loads Durable stainless steel fasteners on all components UTILITY RIG RACK Aluminum trusses for exceptional front-to-rear stability Durable stainless steel fasteners on all components POWERGATE ELECTRIC TAILGATE LOCK Locks tailgate when doors are locked Easy plug-and-go wiring harness WEATHERGATE TAILGATE SEAL Rubber seal keeps dirt and moisture out Fits all makes and models
ALSO FROM PACE EDWARDS Total Remote Control BEDLOCKER ELECTRIC Hands-free, remote operation Powerful electric motor wires to your truck battery Cover opens/closes in less than 30 seconds can stop at any point Heavy-duty, powder-coated aluminum exterior with low-profile blanket design Manual override release lever provides back up in case of lost remotes or dead batteries Tough, Coated Aluminum Deck FULL-METAL JACKRABBIT Retracts into a canister box at the front of the truck bed when you turn the lock knob Tough, powder-coated aluminum exterior Easy maintenance low-profile design Closes easily with a built-in pull strap can be key-locked along the rail every 12 inches Hard-Cover Security, Soft-Top Look THE ORIGINAL JACKRABBIT Retracts automatically into a canister box at the front of the truck bed when you turn the lock knob Strong aluminum panels with ArmorTek automotive-grade, polymer-vinyl exterior Closes easily with a built-in pull strap can be key-locked along the rail every 12 inches Clamps come standard on most applications (no drill required) watch the videos online WHAT DO YOU NEED TO DO TODAY? INSTALL Easy, quick installation; requires only a Phillips screwdriver and 7/16" wrench REMOVE Easily removed any time for full-bed access REPEAT Install and remove depending on your needs by SOLID COVER SECURITY RETRACTS IN SECONDS ALLOWS FULL REAR VISIBILITY NO BULKY PANELS
EASY TO INSTALL Switchblade is designed for quick and easy installation and removal. Its design makes it the ideal truck bed cover for people who want secure cargo space some of the time and full bed access the rest of the time. Switchblade requires only a Phillips screwdriver and 7/16 wrench for installation and removal. One-year warranty. THE SWITCHBLADE INSTALLATION KIT INCLUDES: Canister Two drain tubes Two side rails Two locator bolts Four screws Four rail clamps INSTALLATION INSTRUCTIONS CANISTER 1. Center canister on truck rails and push completely forward. 2. Position rail against the side of the truck s interior bed rail. SIDE RAIL 3. Slide clamps into the notches in the rail and tighten. 4. Tighten locator bolts. 5. Position the top cover on the canister and mount with four screws. LOCATOR BOLT RAIL CLAMP
These premium retractable truck bed covers work with our commercial rack systems when combined with Pace Explorer series rails: Tough, Coated Aluminum Deck FULL-METAL JACKRABBIT Tough powder-coated aluminum exterior Easy maintenance low-profile design Retracts into a canister box at the front of the truck bed when you turn the lock knob Total Remote Control BEDLOCKER ELECTRIC Hands free remote operation Cover opens/closes in less than 30 seconds can stop at any point Heavy-duty, powder-coated aluminum exterior with low-profile blanket design Retracts into a canister box at the front of the truck bed Wires to truck battery; manual override release provides back up WORKS AS HARD AS YOU Hard-Cover Security, Soft-Top Look THE ORIGINAL JACKRABBIT ROLL CLOSED All Pace Edwards covers roll and stow inside a tough, flush-fitting canister behind the cab with quick, clamp-on installation. Installed and serviced by North America s largest dealer network, Pace Edwards retractable covers are covered by our industry-leading warranties. Retracts into a canister box at the front of the truck bed when you turn the lock knob Strong aluminum panels with ArmorTek automotive-grade, polymer-vinyl exterior Low-profile, flush-fit design Closes easily with a built-in pull strap can be key-locked along the rail every 12 inches Clamps come standard for no-drill installation on most models. ROLL OPEN With a Pace Edwards Retractable Truck Bed Cover, you have the option of riding with an open truck bed or with a secure, locked cover for your tools. And in addition to security, a Pace Edwards cover increases your fuel efficiency by improving the aerodynamics of your truck.
A SMARTER WAY TO WORK Durable Pace Edwards Commercial Fleet Products are reliable and efficient truck solutions that are versatile and secure. Lock up tools and equipment under the cover, or carry oversized cargo with the cover UTILITY RIG RACK SYSTEM WITH JACKRABBIT CONTRACTOR RIG RACK WITH FULL METAL JACKRABBIT RETRACTABLE UTILITY BED COVER A luminum trusses for exceptional front-to-rear stability PVC insert on rig crossmember reduces friction when loading and unloading Durable stainless steel fasteners on all components Removable rear truss for hauling large items Aluminum extension beams support longer loads Durable stainless steel fasteners on all components Rust-proof system with removable rear cross member and adjustable handles Four work winches included Available in Manual & Electric Designed specifically for service-body applications, fits most 8 and 9 models Made of tough, black, powder-coated aluminum panels, interlocked for strength and durability Cover retracts into a front canister for easy access to the truck bed Fully secure when closed, even when the tailgate is unlocked retracted. Transport other cargo or WORK WINCH building materials with our rugged Tough tie-down system secures large loads to the Contractor Rig Rack rack systems, specifically designed to work with the BedLocker, Full-Metal ELECTRIC COVER FEATURES Electromagnetic brake locks the cover in any position Drive system release mechanism for opening during a power failure or emergency Patented silicone weather hinge provides a tight seal between aluminum panels Operating switch can be in the cab, an exterior locking compartment or both JackRabbit and the JackRabbit Retractable Truck Bed Covers. EXPLORER SERIES RAILS Increase cargo capacity above the cover Fits many brands of racking components Accommodates Pace Edwards utility and contractor racks Full-Metal JackRabbit s tough, black powder-coated aluminum deck is constructed with interlocking silicone hinges for strength and flexibility. JackRabbit s weather resistant, ArmorTek deck provides hard cover security with a soft top look. MANUAL COVER FEATURES Heavy-duty spring helps retract the cover smoothly Built-in pull strap engages the latch at 12 intervals Independent latch and lock handle system offset to driver side
SWITCHBLADE Armor Tek Vinyl over aluminum panel LOAD. RETRACT. LOCK. FOUR RETRACTABLE COVERS TO FIT THE WAY YOU WORK. BEDLOCKER ELECTRIC INSTALL. REMOVE. REPEAT. SWITCHBLADE Install quickly and easily Remove just as easily for full bed access Retracts in seconds Solid cover security Allows full rear visibility No bulky panels Requires only a Phillips screwdriver and 7/16 wrench to install and remove One-year warranty TOTAL REMOTE CONTROL BEDLOCKER ELECTRIC Hands-free, remote operation Powerful electric motor wires to your truck battery Cover opens/closes in less than 30 seconds can stop at any point Heavy-duty, powder-coated aluminum exterior with low-profile blanket design Retracts into a canister box at the front of the truck bed Manual override release lever provides back up in case of lost remotes or dead batteries No-drill installation TOUGH, COATED ALUMINUM DECK FULL-METAL JACKRABBIT Retracts into a canister box at the front of the truck bed when you turn the lock knob Tough, powder-coated aluminum exterior Easy maintenance low-profile design Closes easily with a built-in pull strap can be key-locked along the rail every 12 inches Clamps come standard on most applications (no drill required) watch the videos online HARD-COVER SECURITY, SOFT-TOP LOOK THE ORIGINAL JACKRABBIT Retracts into a canister box at the front of the truck bed when you turn the lock knob Strong aluminum panels with ArmorTek automotive-grade, polymer-vinyl exterior Low-profile design Closes easily with a built-in pull strap can be key-locked along the rail every 12 inches Clamps come standard on most applications (no drill required) watch the videos online Powder coated aluminum extrusion FULL-METAL JACKRABBIT Powder coated aluminum extrusion THE ORIGINAL JACKRABBIT Armor Tek Vinyl over aluminum panel
ACCESSORIES TO MAKE YOUR COVER FIT YOU UTILITY RIG RACK Available with JackRabbit and Full-Metal JackRabbit Aluminum trusses for exceptional front to rear stability Durable stainless steel fasteners on all components PVC insert on rig crossmember reduces friction when loading and unloading Removable rear truss for hauling large items CONTRACTOR RIG RACK Available with JackRabbit and Full Metal JackRabbit Aluminum extension beams support longer loads Durable stainless steel fasteners on all components Rust-proof system with removable rear cross member and adjustable handles Four work winches included BedLocker/Full Metal Jack Rabbit Heavy duty powder coated aluminum exterior Switchblade/Jack Rabbit Strong aluminum panels with ArmorTek automotive-grade, polymer vinyl exterior EXPLORER SERIES RAILS Increase cargo capacity above the cover Fits many brands of racking components Accommodates Pace Edwards Utility and Contractor racks
INSTALL. REMOVE. REPEAT. Install quickly and easily Remove just as easily for full bed access Retracts in seconds Solid-cover security Allows full rear visibility No bulky panels One-year warranty by
DESIGNED FOR EASY INSTALLATION AND REMOVAL, ANY TIME. Switchblade is the ideal truck bed cover for people who want secure cargo space some of the time, and full-bed access the rest of the time. Not only are installation and removal fast, they require only a Phillips screwdriver and 7/16" wrench. SWITCHBLADE KIT INCLUDES: Canister Two drain tubes Two side rails YEAR Two locator bolts Four screws Four rail clamps MODEL INSTALLATION INSTRUCTIONS 1. Center canister on truck rails and push completely forward. 2. Position rail against the side of the truck s interior bed rail. 3. Slide clamps into the notches in the rail and tighten. BED LENGTH BOX 4. Tighten locator bolts. 5. Position the top cover on the canister and mount with four screws. COMPLETE KIT PART # KIT CONTAINS CANISTER PART # RAIL PART # CHEVY/ GMC 2015 Colorado/Canyon Crew Cab 5' 2" XSB SWCA03A25 SW2105 SW5125 2015 Colorado/Canyon 6' 2" SB SWCA04A26 SW2104 SW5126 88-13 C/K/Silverado, Heavy Duty^, & '14 Heavy Duty 6' 6" SB SWC0303 SW2003 SW5003 88-13 C/K/Silverado, Heavy Duty^, & '14 Heavy Duty 8'0" LB SWC0404 SW2004 SW5004 04-15 Silverado 1500 Crew Cab 5' 8" XSB SWC3250 SW2032 SW5050 14-15 Silverado/Sierra 1500 + 2015 Heavy Duty 6'6" SB SWC95A17 SW2095 SW5117 14-15 Silverado/Sierra 1500 + 2015 Heavy Duty 8'0" LB SWC96A18 SW2096 SW5118 DODGE 09-15 Ram 1500 CREW CAB 5' 6" XSB SWD77A01 SW2077 SW5101 09-15 Ram 6' 3" SB SWD7833 SW2078 SW5033 09-15 Ram 8'0" LB SWD7936 SW2079 SW5036 02-08 Ram & '09 Ram 2500/3500 6' 2" SB SWD2233 SW2022 SW5033 02-08 Ram & '09 Ram 2500/3500 8' LB SWD2336 SW2023 SW5036 FORD 04-14 Super Crew / SuperCab 5' 6" XSB SWF2843 SW2028 SW5043 97-14 F-Series LightDuty 6' 5" SB SWF29A20 SW2029 SW5120 97-14 F-Series LightDuty 8' LB SWF3042 SW2030 SW5042 08-15 F-Series Super Duty 6' 9" SB SWF6985 SW2069 SW5085 08-15 F-Series Super Duty 8' 1" LB SWF7084 SW2070 SW5084 2015 F-Series LightDuty 6' 5" SB SWFA06A29 SW2106 SW5129 2015 F-Series LightDuty 8' LB SWFA07A30 SW2107 SW5130 2015 Super Crew / SuperCab 5' 6" XSB SWFA05A28 SW2105 SW5128 TOYOTA 07-15 Tundra CrewMax (*2) 5' 5" XSB SWT5379 SW2053 SW5079 07-15 Tundra Regular & Double Cab (*2) 6' 5" SB SWT5173 SW2051 SW5073 07-15 Tundra Regular & Double Cab (*2) 8' LB SWT5274 SW2052 SW5074 05-15 Tacoma Double Cab 5' 1" XSB SWT7475 SW2074 SW5075 05-15 Tacoma Regular and Access Cab 6' 2" SB SWT9854 SW2098 SW5054 NISSAN 05-15 Nissan Frontier 4' 10" XSB SWN5780 SW2057 SW5080 HD = Heavy Duty (*2) Will impede the use of the optional factory cargo management system ^ Excludes composite box
SECURE. ACCESSIBLE. RUGGED. RETRACTABLE UTILITY BED COVER AVAILABLE IN MANUAL & ELECTRIC Designed specifically for service body applications, fits most 8' and 9' models: longer applications available Made of tough, black, powder-coated aluminum panels, interlocked for strength and durability Cover retracts into a front canister for easy access to the utility bed Works with or without tailgate. ELECTRIC COVER FEATURES MANUAL COVER FEATURES Electromagnetic brake locks the cover in any position Drive system release mechanism for opening during a power failure or emergency Patented silicone weather hinge provides a tight seal between aluminum panels Operating switch can be in the cab or exterior locking compartment or both Heavy-duty spring helps retract the cover smoothly Built-in pull strap engages the latch at 12 intervals Mechanical weather hinge provides a tight seal between aluminum panels Independent latch and lock handle system offset to driver side
QUICK, EASY ACCESS REDUCES DELIVERY TIMES THE PACE EDWARDS VERTICAL DOOR SYSTEM An alternative for fleet managers, commercial truck upfitters and truck body manufacturers An efficient, versatile option for all delivery and service vehicles, the Pace Edwards electric Vertical Door System offer advantages over traditional hinged and pocket doors. Designed with interlocking, retractible aluminum extrusion technology, these doors enhance safety for drivers and operate more efficiently, helping you improve delivery times. FEATURES Interlocking aluminum panels Powerful, reliable motorized operation with manual override Available for 12V and 24V electrical systems 3-way control: At the door, in the cab, by remote keyfob High-speed operation: Fully open or closed in seconds Electromechanical brake Retracts into a compact, self-contained overhead canister Easy-access service panel Custom sizes: fits a wide range of applications Bump stop protects personnel and cargo Rain management drip rail Door-open alarm ADVANTAGES Vertical door is unaffected by gusts of wind and does not swing into traffic Safer access no door blocking movement or line of sight Better for confined spaces Frees hands for delivery tasks Lightweight aluminum reduces weight and saves fuel Electric operation reduces driver strain and use injuries Service body and pick up applications are also available.