z2 otary Action File Commercial and SA Book and Specification uide Version 5.0 ffective February 1, 2012
z2 eneral Information & Specifications z2 otary Action File 1 BAS: he z2 base is formed out of 13 gauge steel with 13 gauge steel-formed U-Channel reinforcements. hese 13 gauge steel channels have a 4" wide x 3-1/2" deep cross-section and run the full length and width of the base. hese channels are mig welded to the base forming a rigid structure capable of supporting the weight of the cabinet. At each corner, a welded steel 11 gauge gusset adds strength and rigidity to the base. Four adjustable leveling feet allow the base to be leveled from the top of the base. he base mechanism provides 90 indexing of the rotary file cabinet. he base does not require the use of a foot pedal to index the cabinet. 8 7 2 UPIHS AND OCK: ach z2 unit has (4) upright posts with dual durometer PVC closing strips. he posts are made from 11 gauge steel and are bolted directly to the unit base with (2) 1/4" 20 flat head bolts per post. A lock assembly and locking rod is supplied with each unit and is conveniently located on the right front post. All cabinets are random-keyed. ock bar is formed from 3/8" diameter steel rod for maximum durability. ocks have field removable core for easy key changes. ocks can be installed on both sides of unit. Unit can be locked in the open or closed position. 6 5 9 4 3 2 3 4 5 6 7 8 9 OAY BOOM: he z2 rotary bottom rides on top of the 1 base and is fully supported by 5/8" diameter, hardened steel ball bearings. he letter size unit has a 19-1/4" diameter bearing cage with 22 each, 5/8" diameter ball bearings. he legal size unit has a 24" diameter bearing cage with 44 each 5/8" diameter ball bearings. he rotor bottom pivots on a 3/4" diameter pin and a mating steel brushing, that is mig welded to the underside of the rotor shelf. he rotor bottom is constructed by mig welding and spot welding an 11 gauge steel bottom support plate to an 18 gauge steel top. wo (2) each 14 gauge steel reinforcement angles are sandwiched between and support the full length of the top and bottom plates. he 90 index indentation is formed on the bottom support plate. Slots in 1" centers are punched on top of the rotary bottom to accept dividers. CN PANS: A structural center panel is provided with each rotary file unit. he 13-1/2" high, 16 gauge steel panel is bolted to the inner flange of the doors for outstanding cabinet strength. OAY SID PANS: ach 3-piece rotary side panel is formed for maximum strength and rigidity. he outer panel is formed from 20 gauge steel and is beveled on each leading edge for superior post clearance. he 18 gauge inner panel is spot welded to the outer panel for high load carrying capacity. he inner door panel has holes on 1/2" center to support and provide vertical height adjustment of accessories. ND PANS: he end panels complete the unit and are formed from 18 gauge cold rolled steel. he end panel bolts directly to the unit posts and converts an adder unit to a starter unit. he end panels are connected to the unit with a keyhole system that allows panels to be installed by 1 person. OAY OP: he 20 gauge steel rotary top is formed for strength and is bolted to the side panels. he rotary top has a 3/4" diameter welded pivot pin. CANOPY OP: Formed and welded for rigidity and strength, the 18 gauge canopy top is mechanically fastened to each post. he 1" I.D. steel bushing that mates with the rotary top pivot pin is mig welded to an 11 gauge steel plate. he bushing plate is spot welded to the center of the canopy top. SHF: Shelves are formed of 18 gauge steel with a 5-3/8" high integral back stop. Shelf is slotted on 1" centers to accept file dividers. Shelf is fastened in place with four self-tapping screws and is adjustable on 1/2" centers. 10 FINISH: All steel parts are thoroughly cleaned using a three-stage iron phosphate washer and then coated with an poxy-hybrid powder coat finish using a state-of-the-art electrostatic paint system. Powder coating is more environmentally friendly than liquid paint and provides a durable uniform finish that is scratch and corrosion resistant. : 800-828-8018 1 FFCIV FBUAY 1, 2012
Space Planner etter and egal /SA op View 2-7/8" 2-7/8" /ADD 98" 25" 36-1/2" 25" 30-3/4" Wall Closure Panel Wall Closure Panels Double Wide 6" 12" A/SA op View 3-3/8" 3-3/8" A/ADD 123" 31" 45-1/2" 31" 38-3/4" Wall Closure Panel Wall Closure Panels Double Wide 7" 14" : 800-828-8018 2 FFCIV FBUAY 1, 2012
Planning uide SANDAD z2 SPACIN For your convenience, the charts shown represent both typical storage applications and standard spacing requirements. Determine allowable storage requirements and choose your required height z2 otary Action File. efer to the adjacent Clear Opening Chart to determine allowable inside clear height. Subtract listed shelf/ drawer height to determine allowable number of shelves and/or drawers. Note: Mixed media can be specified on all z2 otary Action Files with Pull-out Drawers limited to the first five levels only. *All units include 1 fixed base shelf. All preconfigured units shown on pages 5-6 have shelf openings of 10". : 800-828-8018 xample: 7-high Standard z2 otary Action File with an internal clear height of 75.5" Storage equirement Include: (2) Pull-out File Drawers (10-1/2" H x 3)... -31.5" (2) Multimedia drawer with CD's (calculate media height (5-1/2" H) plus 1/2" (round-up to nearest 1/2").... -6.0" (1) Fixed shelf for etter Size Folders (10-1/2" H).... -10.5" (2) Fixed shelf for Binders (13-1/2" H).... -27.0" emaining Vertical Space: 0.5" SPACIN CHA FO AND A SHVS NUMB OF SHF OPNINS BY UNI HIH* CA OPNIN QUID 2-HIH 3 High 4 High 5 High 6 High 7 High 8 High 6" 2 + 4-3/4" 5 + 0" 6 + 5-1/2" 8 + 3-1/2" 10 + 1-1/2" 11 + 5-1/2" 13 + 3-1/2" 6-1/2" 2 + 4-1/4" 5 + 1/2" 6 + 2-1/2" 7 + 6" 9 + 3" 11 + 0" 12 + 3-1/2" 7" 2 + 3-3/4" 4 + 5" 5 + 6-1/2" 7 + 2-1/2" 8 + 5-1/2" 10 + 1-1/2" 11 + 4-1/2" 7-1/2" 2 + 3-1/4" 4 + 3" 5 + 4" 6 + 6-1/2" 8 + 1-1/2" 9 + 4" 10 + 6-1/2" 8" 2 + 2-3/4" 4 + 1" 5 + 1-1/2" 6 + 3-1/2" 7 + 5-1/2" 8 + 7-1/2" 10 + 1-1/2" Above units due to height of opening will not accommodate adjustable file dividers. 8-1/2" 2 + 2-1/4" 3 + 7-1/2" 4 + 7-1/2" 6 +-1/2" 7 + 2" 8 + 3-1/2" 9 + 5" 9" 2 + 1-3/4" 3 + 6" 4 + 5-1/2" 5 + 6-1/2" 6 + 7-1/2" 7 + 8-1/2" 9 +-1/2" 9-1/2" 2 + 1-1/4" 3 + 4-1/2" 4 + 3-1/2" 5 + 4" 6 + 4-1/2" 7 + 5" 8 + 5-1/2" 10" 2 + 3/4" 3 + 3" 4 + 1-1/2" 5 + 1-1/2" 6 + 1-1/2" 7 + 1-1/2" 8 + 1-1/2" 10-1/2" 1 + 10-3/4" 3 + 1-1/2" 3 + 10" 4 + 9-1/2" 5 + 9" 6 + 8-1/2" 7 + 8" 11" 1 + 10-1/4" 3 + 0" 3 + 8-1/2" 4 + 7-1/2" 5 + 6-1/2" 6 + 5-1/2" 7 + 4-1/2" 11-1/2" 1 + 9-3/4" 2 + 10" 3 + 7" 4 + 5-1/2" 5 + 4" 6 + 2-1/2" 7 + 1" 12" 1 + 9-1/4" 2 + 9" 3 + 5-1/2" 4 + 3-1/2" 5 + 1-1/2" 5 + 11-1/2" 6 + 9-1/2" 12-1/2" 1 + 8-3/4" 2 + 8" 3 + 4" 4 + 1-1/2" 4 + 11-1/2" 5 + 9" 6 + 6-1/2" 13" 1 + 8-1/4" 2 + 7" 3 + 2-1/2" 3 + 12-1/2" 4 + 9-1/2" 5 + 6-1/2" 6 + 3-1/2" 13-1/2" 1 + 7-3/4" 2 + 6" 3 + 1" 3 + 11" 4 + 7-1/2" 5 + 4" 6 +-1/2" 14" 1 + 7-1/4" 2 + 5" 2 + 13-1/2" 3 + 9-1/2" 4 + 5-1/2" 5 + 1-1/2" 5 + 11-1/2" 14-1/2" 1 + 6-3/4" 2 + 4" 2 + 12-1/2" 3 + 8" 4 + 3-1/2" 4 + 13-1/2" 5 + 9" 15" 1 + 6-1/4" 2 + 3" 2 + 11-1/2" 3 + 6-1/2" 4 + 1-1/2" 4 + 11-1/2" 5 + 6-1/2" 3 FFCIV FBUAY 1, 2012
Planning uide SPACIN CHA FO FI/SOA AND MUIMDIA DAWS SANDAD z2 UNIS Drawer/Media Size (H) 2 - HIH 3 High 4 High 5 High 6 High 7 High 8 High File/Storage Drawer* 2 + 0" 3+2-1/4" 4+1/2" 5+1/2" 6+1/2" 7+1/2" 8+1/2" Multimedia Drawer** 5 + 1-1/4" 8+2" 10+3" 13+1-1/2" 15+3-1/2" 18+2-1/2" 21+1" MDIA SIZ UP O: U se the following for specific media height requirements. 4-1/4" 4 + 3-1/4" 7+2-1/4" 9+2-1/4" 11+3-3/4" 14+3/4" 16+2-1/4" 18+3-3/4" 4-3/4" 4 + 1-1/4" 6+3-3/4" 8+2-3/4" 10+3-1/4" 12+3-3/4" 14+4-1/4" 16+3-3/4" 5-1/4" 3 + 4-3/4" 6+3/4" 7+4-1/4" 9+3-3/4" 11+3-1/4" 13+2-3/4" 15+2-1/4" 5-3/4" 3 + 3-1/4" 6+3-3/4" 7+1-3/4" 8+5-1/4" 10+3-3/4" 12+2-1/4" 14+3/4" 6-1/4" 3 + 1-3/4" 5+1-1/4" 6+3-3/4" 8+1-1/4" 9+5-1/4" 11+2-3/4" 13+1/4" 6-3/4" 3 + 1/4" 4+5-3/4" 6+3/4" 7+4-1/4" 9+3/4" 10+4-1/4" 12+3/4" 7-1/4" 2 + 6-1/4" 4+3-3/4" 5+5-1/4" 7+3/4" 8+3-3/4" 9+6-3/4" 11+2-1/4" 7-3/4" 2 + 5-1/4" 4+1-3/4" 5+2-3/4" 6+5-1/4" 7+7-3/4" 9+2-1/4" 10+4-3/4" 8-1/4" 2 + 4-1/4" 3+7-3/4" 5+1/4" 6+2-1/4" 7+4-1/4" 8+6-1/4" 9+7-3/4" 8-3/4" 2 + 3-1/4" 3+6-3/4" 4+6-3/4" 5+8-1/4" 7+3/4" 8+2-1/4" 9+3-3/4" 9-1/4" 2 + 2-1/4" 3+5-1/4" 4+4-3/4" 5+5-3/4" 6+6-3/4" 7+7-3/4" 8+8-3/4" 9-3/4" 2 + 1-1/4" 3+4" 4+2-3/4" 5+3-1/4" 6+4" 7+4-1/4" 8+4-3/4" Above chart reflects standard drawer configurations only. efer to Standard Shelf Spacing chart for letter or legal depth shelves. All drawers are adjustable on 1/2" increments. *Drawer height is 10" high. Standard spacing for File/Storage drawers allows for 1/2" clearance between drawers for top-tab requirements. **Drawer height is 3-3/4" high. efer to the below chart for additional drawer spacing options based on your specific media height requirements. CA OPNIN CHA A INSID CA OPNIN* 2 - HIH 3 - HIH 4 - HIH 5 - HIH 6 - HIH 7 - HIH 8 - HIH Height 21-1/4 34 43 53-1/2 64 74-1/2 85 Width 23-3/4 23-3/4 23-3/4 23-3/4 23-3/4 23-3/4 23-3/4 Depth 12-1/2 12-1/2 12-1/2 12-1/2 12-1/2 12-1/2 12-1/2 Height 21-1/4 34 43 53-1/2 64 74-1/2 85 Width 30 30 30 30 30 30 30 Depth 15-1/2 15-1/2 15-1/2 15-1/2 15-1/2 15-1/2 15-1/2 Height *Includes base shelf. Standard Datum Paint 22 - Warm Brown 15 - Bone White Charcoal ray Putty Black he Corresponding Molding Colors are the dual durometer PVC closing strips referred to in the specifications sheet which help prevent pinch points as well as provide an aesthetic, finished look for the z2 otary Action File. 46 - Soft White 48 - Ivory 45 - Dark ray Metallic 23 - Medium ray Metallic 34 - ight ray Metallic 56 - an Metallic 25 - Black 86 - ray Mist 47 - ight ray 12 - Dove ray 29 - Sage 41 - Slate Blue 42 - ech Blue 17 - Burgundy P58 - Blue P93 - Safety Yellow P27 - Industrial ed : 800-828-8018 4 FFCIV FBUAY 1, 2012
Assembled Preconfigured etter & egal Depth Units All Preconfigured Units include shelves placed on 10-1/2" centers for 10" clear vertical height. All shelves are adjustable on 1/2" centers, refer to Standard Shelf Spacing Chart found on page 3 for more information. Standard shelf spacing allows for the addition of pull-out posting shelf (sold separately). See page 11 for posting shelf information. 2-OPNIN Includes 2 shelves per side 1 fixed base shelf and 1 adjustable. Includes 8 adjustable file dividers. A Item # ype D W H FI st bs. ist -S2 Starter 25 36-1/2 30 96 192 1,892.00 -A2 Adder 25 30-3/4 30 96 157 1,747.00 Item # ype D W H FI st bs. ist -S2 Starter 31 45-1/2 30 120 255 2,409.00 -A2 Adder 31 38-3/4 30 120 207 2,098.00 3-OPNIN Includes 3 shelves per side 1 fixed base shelf and 2 adjustable. Includes 12 adjustable file dividers. A Item # ype D W H FI st bs. ist -S3 Starter 25 36-1/2 42 144 269 2,078.00 -A3 Adder 25 30-3/4 42 144 235 1,878.00 Item # ype D W H FI st bs. ist -S3 Starter 31 45-1/2 42 180 363 2,534.00 -A3 Adder 31 38-3/4 42 180 321 2,209.00 4-OPNIN Includes 4 shelves per side 1 fixed base shelf and 3 adjustable. Includes 16 adjustable file dividers. A Item # ype D W H FI st bs. ist -S4 Starter 25 36-1/2 51 192 296 2,317.00 -A4 Adder 25 30-3/4 51 192 262 2,066.00 Item # ype D W H FI st bs. ist -S4 Starter 31 45-1/2 51 240 423 2,744.00 -A4 Adder 31 38-3/4 51 240 361 2,379.00 5-OPNIN Includes 5 shelves per side 1 fixed base shelf and 4 adjustable. Includes 20 adjustable file dividers. A Item # ype D W H FI st bs. ist -S5 Starter 25 36-1/2 61-1/2 240 351 2,381.00 -A5 Adder 25 30-3/4 61-1/2 240 303 2,113.00 Item # ype D W H FI st bs. ist -S5 Starter 31 45-1/2 61-1/2 300 471 2,936.00 -A5 Adder 31 38-3/4 61-1/2 300 414 2,667.00 : 800-828-8018 5 FFCIV FBUAY 1, 2012
Assembled Preconfigured etter & egal Depth Units, Continued 6-OPNIN Includes 6 shelves per side 1 fixed base shelf and 5 adjustable. Includes 24 adjustable file dividers. A Item # ype D W H FI st bs. ist -S6 Starter 25 36-1/2 72 288 387 2,622.00 -A6 Adder 25 30-3/4 72 288 337 2,417.00 Item # ype D W H FI st bs. ist -S6 Starter 31 45-1/2 72 360 546 3,249.00 -A6 Adder 31 38-3/4 72 360 458 2,946.00 7-OPNIN Includes 7 shelves per side 1 fixed base shelf and 6 adjustable. Includes 28 adjustable file dividers. A Item # ype D W H FI st bs. ist -S7 Starter 25 36-1/2 82-1/2 336 432 3,044.00 -A7 Adder 25 30-3/4 82-1/2 336 369 2,776.00 Item # ype D W H FI st bs. ist -S7 Starter 31 45-1/2 82-1/2 420 585 3,682.00 -A7 Adder 31 38-3/4 82-1/2 420 510 3,404.00 8-OPNIN Includes 8 shelves per side 1 fixed base shelf and 7 adjustable. Includes 32 adjustable file dividers. A Item # ype D W H FI st bs. ist -S8 Starter 25 36-1/2 93 384 469 3,334.00 -A8 Adder 25 30-3/4 93 384 402 2,974.00 Item # ype D W H FI st bs. ist -S8 Starter 31 45-1/2 93 480 638 4,031.00 -A8 Adder 31 38-3/4 93 480 555 3,686.00 Notes: All units ship assembled unless otherwise specified Add the suffix "KD" to the part number for unassembled cabinets. AMP: -S3KD All shelves are independent (excluding Base Shelf) and adjustable on 1/2" centers with 10" clear vertical height. All shelves are punched on 1" centers to accept file dividers. All units include 2 adjustable file dividers per shelf opening. See page 11 for additional pricing for file dividers. All Starter units include nd Panel Kit. nd panel Kit may be added onto adder unit to convert to a starter unit. See page 11 for end panel pricing. Standard shelf spacing will allow for add-on posting shelf. See page 11 for posting shelf pricing and additional information. etter Shelf Capacity of 24 FI. egal Shelf Capacity of 30 FI. Packaging and skid adds 5-1/2" to the overall height. : 800-828-8018 6 FFCIV FBUAY 1, 2012
Assembled Preconfigured etter & egal Depth Units With Drawers **O OD UNIS WIH DAW ACH KI, ADD -DK O H PA NUMB. S APPOPIA COUMN FO PICIN.** 2-OPNIN Includes 2 drawers per side. A Item # ype ocking/non ocking D W H FI st bs. ist Add -DK ist -FS1-S2 Starter Non-ocking 25 36-1/2 30 88 244 2,385.00 2,429.00 -FS1-A2 Adder Non-ocking 25 30-3/4 30 88 209 2,254.00 2,298.00 -FS1-S2 Starter ocking 25 36-1/2 30 88 244 2,506.00 2,550.00 -FS1-A2 Adder ocking 25 30-3/4 30 88 209 2,376.00 2,420.00 Item # ype ocking/non ocking D W H FI st bs. ist Add -DK ist -FS1-S2 Starter Non-ocking 31 45-1/2 30 112 340 2,775.00 2,819.00 -FS1-A2 Adder Non-ocking 31 38-3/4 30 112 292 2,482.00 2,526.00 -FS1-S2 Starter ocking 31 45-1/2 30 112 340 2,896.00 2,940.00 -FS1-A2 Adder ocking 31 38-3/4 30 112 292 2,603.00 2,647.00 3-OPNIN Includes 3 drawers per side. A Item # ype ocking/non ocking D W H FI st bs. ist Add -DK ist -FS1-S3 Starter Non-ocking 25 36-1/2 42 132 295 2,838.00 2,904.00 -FS1-A3 Adder Non-ocking 25 30-3/4 42 132 251 2,541.00 2,607.00 -FS1-S3 Starter ocking 25 36-1/2 42 132 295 3,020.00 3,086.00 -FS1-A3 Adder ocking 25 30-3/4 42 132 251 2,724.00 2,790.00 Item # ype ocking/non ocking D W H FI st bs. ist Add -DK ist -FS1-S3 Starter Non-ocking 31 45-1/2 42 168 413 3,279.00 3,345.00 -FS1-A3 Adder Non-ocking 31 38-3/4 42 168 355 2,984.00 3,050.00 -FS1-S3 Starter ocking 31 45-1/2 42 168 413 3,461.00 3,527.00 -FS1-A3 Adder ocking 31 38-3/4 42 168 355 3,167.00 3,233.00 4-OPNIN Includes 4 drawers per side. A Item # ype ocking/non ocking D W H FI st bs. ist Add -DK ist -FS1-S4 Starter Non-ocking 25 36-1/2 51 176 348 3,285.00 3,373.00 -FS1-A4 Adder Non-ocking 25 30-3/4 51 176 295 3,042.00 3,130.00 -FS1-S4 Starter ocking 25 36-1/2 51 176 348 3,528.00 3,616.00 -FS1-A4 Adder ocking 25 30-3/4 51 176 295 3,284.00 3,372.00 Item # ype ocking/non ocking D W H FI st bs. ist Add -DK ist -FS1-S4 Starter Non-ocking 31 45-1/2 51 224 485 3,756.00 3,844.00 -FS1-A4 Adder Non-ocking 31 38-3/4 51 224 418 3,426.00 3,514.00 -FS1-S4 Starter ocking 31 45-1/2 51 224 485 3,998.00 4,086.00 -FS1-A4 Adder ocking 31 38-3/4 51 224 418 3,669.00 3,757.00 : 800-828-8018 7 FFCIV FBUAY 1, 2012
Assembled Preconfigured etter & egal Depth Units With Drawers **O OD UNIS WIH DAW ACH KI, ADD -DK O H PA NUMB. S APPOPIA COUMN FO PICIN.** 5-OPNIN Includes 5 drawers per side. A Item # ype ocking/non ocking D W H FI st bs. ist Add -DK ist -FS1-S5 Starter Non-ocking 25 36-1/2 61-1/2 220 404 3,734.00 3,844.00 -FS1-A5 Adder Non-ocking 25 30-3/4 61-1/2 220 341 3,506.00 3,616.00 -FS1-S5 Starter ocking 25 36-1/2 61-1/2 220 404 4,037.00 4,147.00 -FS1-A5 Adder ocking 25 30-3/4 61-1/2 220 341 3,809.00 3,919.00 Item # ype ocking/non ocking D W H FI st bs. ist Add -DK ist -FS1-S5 Starter Non-ocking 31 45-1/2 61-1/2 280 563 4,217.00 4,327.00 -FS1-A5 Adder Non-ocking 31 38-3/4 61-1/2 280 483 3,973.00 4,083.00 -FS1-S5 Starter ocking 31 45-1/2 61-1/2 280 563 4,520.00 4,630.00 -FS1-A5 Adder ocking 31 38-3/4 61-1/2 280 483 4,277.00 4,387.00 6-OPNIN Includes 5 drawers per side. A Item # ype ocking/non ocking D W H FI st bs. ist Add -DK ist -FS1-S6 Starter Non-ocking 25 36-1/2 72 268 460 4,183.00 4,293.00 -FS1-A6 Adder Non-ocking 25 30-3/4 72 268 388 3,997.00 4,107.00 -FS1-S6 Starter ocking 25 36-1/2 72 268 460 4,547.00 4,657.00 -FS1-A6 Adder ocking 25 30-3/4 72 268 388 4,362.00 4,472.00 Item # ype ocking/non ocking D W H FI st bs. ist Add -DK ist -FS1-S6 Starter Non-ocking 31 45-1/2 72 336 640 4,787.00 4,897.00 -FS1-A6 Adder Non-ocking 31 38-3/4 72 336 548 4,513.00 4,623.00 -FS1-S6 Starter ocking 31 45-1/2 72 336 640 5,151.00 5,261.00 -FS1-A6 Adder ocking 31 38-3/4 72 336 548 4,876.00 4,986.00 7-OPNIN Includes 5 drawers per side. A Item # ype ocking/non ocking D W H FI st bs. ist Add -DK ist -FS1-S7 Starter Non-ocking 25 36-1/2 82-1/2 316 517 4,850.00 4,960.00 -FS1-A7 Adder Non-ocking 25 30-3/4 82-1/2 316 434 4,607.00 4,717.00 -FS1-S7 Starter ocking 25 36-1/2 82-1/2 316 517 5,274.00 5,384.00 -FS1-A7 Adder ocking 25 30-3/4 82-1/2 316 434 5,032.00 5,142.00 Item # ype ocking/non ocking D W H FI st bs. ist Add -DK ist -FS1-S7 Starter Non-ocking 31 45-1/2 82-1/2 392 718 5,467.00 5,577.00 -FS1-A7 Adder Non-ocking 31 38-3/4 82-1/2 392 613 5,215.00 5,325.00 -FS1-S7 Starter ocking 31 45-1/2 82-1/2 392 718 5,979.00 6,089.00 -FS1-A7 Adder ocking 31 38-3/4 82-1/2 392 613 5,640.00 5,750.00 : 800-828-8018 8 FFCIV FBUAY 1, 2012
Assembled Preconfigured etter & egal Depth Units With Drawers **O OD UNIS WIH DAW ACH KI, ADD -DK O H PA NUMB. S APPOPIA COUMN FO PICIN.** 8-OPNIN Includes 5 drawers per side. A Item # ype ocking/non ocking D W H FI st bs. ist Add -DK ist -FS1-S8 Starter Non-ocking 25 36-1/2 93 364 573 5,397.00 5,507.00 -FS1-A8 Adder Non-ocking 25 30-3/4 93 364 480 5,069.00 5,179.00 -FS1-S8 Starter ocking 25 36-1/2 93 364 573 5,882.00 5,992.00 -FS1-A8 Adder ocking 25 30-3/4 93 364 480 5,433.00 5,543.00 Item # ype ocking/non ocking D W H FI st bs. ist Add -DK ist -FS1-S8 Starter Non-ocking 31 45-1/2 93 448 795 6,072.00 6,182.00 -FS1-A8 Adder Non-ocking 31 38-3/4 93 448 679 5,758.00 5,868.00 -FS1-S8 Starter ocking 31 45-1/2 93 448 795 6,557.00 6,667.00 -FS1-A8 Adder ocking 31 38-3/4 93 448 679 6,280.00 6,390.00 Notes: ** IS NO COMMNDD O OD DAWS ABOV 5 IS HIH** All units ship assembled unless otherwise specified. Add the suffix KD to the part number for unassembled cabinets. AMP: -FS1-S3KD. All Starter units include nd Panel Kit. nd Panel Kit may be added onto any adder unit to convert to a starter unit. See page 11 for end panel pricing. Packaging and skid adds 5-1/2 to the overall height. : 800-828-8018 9 FFCIV FBUAY 1, 2012
Basic Units - z2 & z2 Plus All Basic Units include base shelf only. Additional shelves and/or File/Storage Drawers are available, refer to current page for more information. All shelves and File/Storage Drawers are adjustable on 1/2" centers, refer to Standard Shelf Spacing Chart found on page 3 for more information. Standard Item # Description st. bs ist S-S2 2-High Starter 180 1,755.00 S-A2 2-High Adder 145 1,611.00 S-S3 3-High Starter 199 1,817.00 S-A3 3-High Adder 155 1,491.00 S-S4 4-High Starter 220 1,875.00 S-A4 4-High Adder 167 1,605.00 S-S5 5-High Starter 244 1,933.00 S-A5 5-High Adder 181 1,682.00 S-S6 6-High Starter 268 1,991.00 S-A6 6-High Adder 196 1,787.00 S-S7 7-High Starter 293 2,291.00 S-A7 7-High Adder 210 2,024.00 S-S8 8-High Starter 317 2,457.00 S-A8 8-High Adder 224 2,097.00 A Item # Description st. bs ist S-S2 2-High Starter 244 2,135.00 S-A2 2-High Adder 196 1,811.00 S-S3 3-High Starter 269 2,230.00 S-A3 3-High Adder 211 1,906.00 S-S4 4-High Starter 293 2,295.00 S-A4 4-High Adder 226 1,933.00 S-S5 5-High Starter 323 2,344.00 S-A5 5-High Adder 243 2,076.00 S-S6 6-High Starter 352 2,512.00 S-A6 6-High Adder 260 2,210.00 S-S7 7-High Starter 382 2,801.00 S-A7 7-High Adder 277 2,523.00 S-S8 8-High Starter 411 3,008.00 S-A8 8-High Adder 295 2,664.00 All units ship assembled unless otherwise specified. Add the suffix "KD" to the part number AMP: S-S4KD for unassembled cabinets. efer to page 3 for standard shelf spacing requirements. etter and legal depth cannot be mixed on same unit. See below for appropriate file dividers. See below for appropriate shelf depth for above units. Above cabinets include slotted base shelf only. Packaging and skid adds 5-1/2" to the overall height. Plus Item # Description st. bs ist S-S5 5-High Starter 258 2,381.00 S-A5 5-High Adder 188 2,113.00 S-S6 6-High Starter 290 2,622.00 S-A6 6-High Adder 203 2,417.00 S-S7 7-High Starter 306 3,044.00 S-A7 7-High Adder 217 2,776.00 A Item # Description st. bs ist S-S5 5-High Starter 338 2,936.00 S-A5 5-High Adder 250 2,667.00 S-S6 6-High Starter 367 3,249.00 S-A6 6-High Adder 269 2,946.00 S-S7 7-High Starter 397 3,682.00 S-A7 7-High Adder 284 3,404.00 5 high and 6 high z2 Plus units are 4-1/2" taller than the standard basic units. 7 high z2 Plus units are 6" taller than the standard basic units. : 800-828-8018 10 FFCIV FBUAY 1, 2012
Component Parts - Accessories SOD SHVS Item # Description st. bs ist S Slotted etter Depth Shelf 6 56.00 S Slotted egal Depth Shelf 11 64.00 Formed from 18 gauge steel shelf slotted on 1" centers for file dividers (sold separately). FI DIVIDS Item # Description st. bs ist FD5 5 pack of etter/egal File Dividers 5 19.00 etter/egal File Divider used to support media on shelf. POSIN SHVS Item # Description st. bs ist POS etter Posting Shelf 10 221.00 POS egal Posting Shelf 12 225.00 Full extension pull-out reference shelf to provide convenient worksurface. Available for units 5-8 levels high. ypically installed between 3rd and 4th opening will require 1-1/2" additional vertical clear opening. nd Panel Kit Item # Description st. bs ist -3 3-High etter nd Panel Kit 40 301.00-4 4-High etter nd Panel Kit 42 314.00-5 5-High etter nd Panel Kit 57 328.00-6 6-High etter nd Panel Kit 60 387.00-7 7-High etter nd Panel Kit 74 432.00-8 8-High etter nd Panel Kit 78 467.00-3 3-High egal nd Panel Kit 54 322.00-4 4-High egal nd Panel Kit 63 380.00-5 5-High egal nd Panel Kit 70 412.00-6 6-High egal nd Panel Kit 80 467.00-7 7-High egal nd Panel Kit 90 480.00-8 8-High egal nd Panel Kit 99 524.00 Add-On nd Panel Kits convert adder unit to a starter unit. All Kits include two closed ends. Allow additional space for expansion refer to page 3 for space requirements. : 800-828-8018 11 FFCIV FBUAY 1, 2012
Component Parts - Accessories Continued An optional Drawer atch Kit (-DK) may be added to any of the units listed on this page. o order the kit, please add -DK to the part number and reference the correct column for pricing. For existing units, paint color must be specified. Otherwise, paint color will match the drawer. 3-3/4" Multimedia Drawers Item # Description st. bs ist Add -DK ist -MM3 etter Mutimedia Drawer (Includes 3 dividers) 14 250.00 261.00 -MM3 egal Multimedia Drawer (Includes 4 dividers) 20 256.00 267.00 -MD3 3 Media Divider (each) 1 27.00 38.00 3-3/4" high profile drawer are slotted on 1/2" centers (front & rear) to accept Drawer Dividers. Ideal for a variety of storage applications including cards, checks, VHS, CD, DVD, and Microfilm. Additional dividers are available. Includes pullout suspension and mounting hardware. etter drawer: 12-1/2" Deep x 22-1/4" Wide x 3-3/4" High egal drawer: 15-1/2" Deep x 28-1/2" Wide x 3-3/4" High File/Storage Drawers Item # Description st. bs ist Add -DK ist -FS1 etter File/Storage Drawer - Non ocking 16 197.00 208.00 -FS1 etter File/Storage Drawer - ocking 18 225.00 236.00 -FS1 egal File/Storage Drawer - Non ocking 24 208.00 219.00 -FS1 egal File/Storage Drawer - ocking 26 236.00 247.00 he File/Storage Drawer provides storage for a multitude of items and is ideal for letter and legal depth hanging folders. Available locking or non-locking. Includes pullout suspension and mounting hardware. etter drawer: 12-1/2" Deep x 22-1/4" Wide x 10" High egal drawer: 15-1/2" Deep x 28-1/2" Wide x 10" High Hanging Folder Drawer Item # Description st. bs ist -HF2 etter Depth Hanging Folder Drawer - Non ocking Add -DK ist 15 139.00 150.00 HF2 etter Front Hanging Folder ail (each) 2 43.00 54.00 -HF2 egal Depth Hanging Folder Drawer - Non ocking 22 153.00 164.00 HF2 egal Front Hanging Folder ail (each) 3 51.00 62.00 he Hanging Folder Drawer is ideal for multimedia applications. Suitable for top tab folders, hanging files, or remove front rail for side tab use. Deep drawer allows for a variety of storage uses. All drawers include one removable front hanging folder rail. Adjustable Dividers Sold separately. Specify FD5 Dividers found on page 80. etter drawer: 12-1/2" Deep x 22-1/4" Wide x 10" High egal drawer: 15-1/2" Deep x 28-1/2" Wide x 10" High : 800-828-8018 12 FFCIV FBUAY 1, 2012
Component Parts - Accessories Flat Shelf (Pass hrough) Item # Description st. bs ist FS etter Depth Flat Shelf (each) 6 57.00 FS egal Depth Flat Shelf (each) 8 81.00 Accommodates material storage through both sides of cabinet. All shelves are unslotted (two shelves per opening required). Flat shelves must be located at a minimum of 14" above the otary Bottom to clear Center Panel. Seismic Bracket Item # Description st. bs ist FA Seismic Bracket (pair) 3 38.00 Magnetic Dividers Item # Description st. bs ist MA4 1 Mini Magnetic Divider (4 H x 4 W) 1 15.00 MA7 1 Mini Magnetic Divider (4 H x 7 W) 2 22.00 arment od Item # Description st. bs ist - 24 arment od 3 96.00-30 arment od 4 104.00 Canopy op Item # Description st. bs. ist Z-C etter Depth Canopy op 14 76.00 Z-C egal Depth Canopy op 16 87.00 Z-WC etter Depth op Cover Canopy 10 56.00 Z-WC egal Depth op Cover Canopy 13 67.00 : 800-828-8018 13 FFCIV FBUAY 1, 2012
Component Parts Wall Closure Panels Wall Closure Panel - Single Depth Item # Description st. bs ist -2CS 2-High etter Closure Panel 9 128.00-3SC 3-High etter Closure Panel 10 130.00-4CS 4-High etter Closure Panel 12 131.00-5CS 5-High etter Closure Panel 13 132.00-6CS 6-High etter Closure Panel 17 133.00-7CS 7-High etter Closure Panel 21 134.00-8CS 8-High etter Closure Panel 23 135.00-2CS 2-High egal Closure Panel 10 131.00-3CS 3-High egal Closure Panel 12 132.00-4CS 4-High egal Closure Panel 15 133.00-5CS 5-High egal Closure Panel 18 134.00-6CS 6-High egal Closure Panel 21 135.00-7CS 7-High egal Closure Panel 25 138.00-8CS 8-High egal Closure Panel 29 141.00 Full-height closure panel between wall and z2 otary Action File applications. efer to page 3 for space planning information. Wall Closure Panel - Double Depth Item # Description st. bs ist -2CD 2-High etter Closure Panel 16 168.00-3SD 3-High etter Closure Panel 19 169.00-4CD 4-High etter Closure Panel 23 172.00-5CD 5-High etter Closure Panel 25 179.00-6CD 6-High etter Closure Panel 33 184.00-7CD 7-High etter Closure Panel 42 191.00-8CD 8-High etter Closure Panel 45 196.00-2CD 2-High egal Closure Panel 19 162.00-3CD 3-High egal Closure Panel 23 170.00-4CD 4-High egal Closure Panel 29 176.00-5CD 5-High egal Closure Panel 33 182.00-6CD 6-High egal Closure Panel 41 189.00-7CD 7-High egal Closure Panel 52 195.00-8CD 8-High egal Closure Panel 58 202.00 Full-height closure panel for back-to-back z2 otary Action File applications. efer to page 3 for space planning information. : 800-828-8018 14 FFCIV FBUAY 1, 2012
89 Church oad, PO Box 355 migsville, PA 17318-0355 Factory / 1-800-828-8018 National / 1-800-FIIN-1 Fax / 1-888-FIIN-1 (345-4641) www.datumfiling.com / sales@datumfiling.com