Contents Introduction to P C Henderson Pg 2 Commercial Straight Sliding Systems Pg 3 Husky Husky Pacer Pacer Flexirol Commercial Folding Systems Pg 4 Husky Pacer Centerfold Pacer Endfold Pacer Endfold Wood Doors up to 65 lbs. Commercial Multidirectional Systems Pg 38 Pacer 35º Pacer 35º Flexirol 90º 00 and 200 lbs. Panels up to 65 lbs. Wood and Metal Doors up to 440 lbs. up to 285 lbs. Wood, Metal, or 55 and 00 lbs. Wood Doors up to 65 lbs. Doors up to 99 lbs. Wood and Aluminum Doors up to 264 lbs. Doors up to 264 lbs. Wood and Aluminum Doors up to 220 lbs. Pg 4 Pg 6 Pg 7 Pg 9 Pg 2 Pg 6 Pg 8 Pg 20 Pg 22 Pacer Endfold Exterior Pg 24 Pacer Endfold Aluminum Pg 26 Flexirol Centerfold Pg 28 Flexirol Endfold Interior Pg 30 Flexirol Endfold Exterior Pg 32 Flexirol Endfold Aluminum Pg 34 Flexirol Folding Pg 36 Pg 40 Pg 42 Pg 44 and Stainless Steel Track and Hardware Pg 53 Straight Sliding Straight Sliding Straight Sliding Commercial (Bottom Roller) Straight Sliding (Bottom Roller) Straight Sliding (Bottom Roller) Folding Round-the- Corner Folding Partitions Folding Partitions Folding Section Doors (Bottom Roller) Overhead Runways Sliding Cantilever Gate Hardware Stainless Steel Straight Sliding Track, Guide Channel, Guides Brackets s Top-Hung (Wood or Metal Straight Sliding) Top-Hung (Wood or Metal Straight Sliding) Top-Hung (Wood or Metal Straight Sliding) 290-307 wood Door Hardware 290-307 metal Door Hardware Mansion and Majestic Wood Door Hardware Sherwood 225-800 Wood Door Hardware Sherwood 225-800 Metal Door Hardware 280-305 Pg 94 Titan Pg 98 /SS, X/SS, 3/SS, 3X/SS Pg 02 284/SS, 285/SS, 53/SS, 56/SS, 57/SS Pg 54 Pg 56 Pg 62 Pg 66 Pg 70 Tangent 290-305 Folding Door Hardware Pg 74 Tangent 290-305 Round-The-Corner Door Hardware Pg 78 Council 290-305 End Folding Door Hardware Pg 82 Council 290-305 Center Pg 86 Folding Door Hardware Arcade A70 End Folding and Center Folding Door Hardware 280/SS, 290/SS, 30/SS Pg 0 280/SS Pg 05 290/SS Pg 06 30/SS Pg 08 Component Illustrations Pg 0 Components Track & Channel Hinges, Brackets, s, Pg 0 Pivot Sets, Guides, and Fittings 280-307 Track, 89-99 Channel Pg 00 Pg 90 Pg 04 Pg 8 Track Brackets Pacer, Flexirol, Husky Pg 9 s Pg 20 P C Henderson has long been acknowledged as the world leader in the design and manufacture of Sliding Gear Systems for residential, commercial and industrial applications. Established in 92, the company is a member of Cardo Door, the largest Business Area within Cardo AB, a major European engineering products group with an annual turnover in excess of 700 million. P C Henderson is based in Bowburn in North East England and has subsidiaries in Holland and Ireland. The company has a long established sales and distribution network in over 70 countries, with head office support from Henderson s fully trained technical sales team. The company is committed to quality and is registered to BS EN ISO 9002: 994 Quality Systems. HENDERSON COMMERCIAL RANGE The three models in the Henderson commercial range - Husky, Pacer and Flexirol - are suitable for doors weighing up to 00 lbs. (500kg). They are ideal for applications such as shop-fronts, hotels, conference centers and offices, where smooth action, high performance and aesthetics are important. You can choose from wood, aluminum and glass door options, with straight sliding, folding and multidirectional stacking systems. Flexirol multidirectional systems can accommodate 90º and 35º movement. Pacer systems allow 35º movement. Aluminum track can be painted on site to match interior colors and ceilings. Pacer track has the option of clip-on aluminum fascia. Flexirol 90º Doors up to 220 lbs. Pg 46 Guides and Other Accessories Pg 2 Flexirol 35º Flexirol 35º Wood and Aluminum Doors up to 00 lbs. Doors up to 00 lbs. Pg 48 Pg 50 P C Henderson Advertising Pg 22 Product Index Pg 24 2
HUSKY, PACER AND FLEXIROL STRAIGHT SLIDING DOOR SYSTEMS The main advantage of using a straight sliding system is that it saves room space, as the door does not require a swing or stacking space to open. Using straight sliding systems therefore makes perfect sense when space is at a premium. Sliding doors also offer a touch of individuality to a room design. P C Henderson s commercial range of straight sliding door systems covers door weights up to 00 lbs. (500kg). The three products in this range, Husky, Pacer and Flexirol have all been designed for high performance with particular attention to aesthetic appearance. With this goal in mind, both Husky and Pacer straight sliding systems have been designed to accommodate a range of clip-on aluminum fascia also supplied by P C Henderson. This aluminum fascia is supplied as standard in a satin anodized finish, with other finishes available on request. In today s modern working environment the use of glass as an important design element has become widespread practice. To meet this challenge, Pacer and Flexirol systems offer the option of glass panels, in 5 /6" (8mm), 3 /8" (0mm) and /2" (2mm) thickness. Pacer is particularly versatile when used in conjunction with glass, offering the opportunity for fixed glass panels to be integrated with the track system in a unique integrated track profile. 3
HUSKY SLIDING00 FOR SLIDING WOOD DOORS TO 00 lbs. Reliable and highly versatile hardware using precision-made components for trouble-free operation. KITS (complete, ready to install) include: ea 280 or pre-drilled track, in steel or 280A aluminum, 6 or 8 foot lengths 2 ea 284N nylon bodied, acetal wheel hangers ea 02N nylon guide 2 ea 60H clip stops (Kit components can be ordered individually) 00 lbs. max door weight Order KITS based on material and length of track: Kit No. Material Max Leaf Size H00/6 steel track/6 ft. 96" x 36" x 2" H00/8 steel track/8 ft. 96" x 48" x 2" H00A/6 aluminum track/6 ft. 96" x 36" x 2" H00A/8 aluminum track/8 ft. 96" x 48" x 2" New 2802A Bypass Track for Husky Sliding Door Hardware 5 6" 3 5 6" (84.) HARDWARE PACK (no. "H00PACK") = KIT w/o track: 2 ea 284N nylon bodied, acetal wheel hangers ea 02N nylon guide 2 ea 60H clip stops BYPASS PACK ALSO AVAILABLE (no. "HBP00PACK") OPTIONAL EXTRAS include: 285 28 brackets - 5 each 287 track stop (bumper type) 285 hanger for metal doors 06R/94 roller guide (use w/) aluminum floor channel F34 aluminum fascia - -3/4" thick doors F38 aluminum fascia - -3/8" thick doors 863 iron bow handle (5-/4" x -3/4") 400 aluminum flush pull (4-/4" x -7/8", 5/8" mortise) 44 aluminum flush pull (5-/4" x 2-/2", 3/4" mortise) 333 aluminum flush bolt (6" x -3/8") FACE FIXED SOFFIT FIXED -3/6" 3/4" 28 280A 284N " 2-9/6" 3-/6" MAX 2-5/8" MIN 280 284N 280 284N 2-/4" MAX -7/8" MIN F34 Aluminum /2" MIN * F38 also available for -3/8" doors. Dimensions are 7/6" x 2-9/6"h. 96" MAX /4" 9/6" /4" 02N 02N 06R/94 3/6" 4
HUSKY SLIDING200 FOR SLIDING WOOD OR METAL DOORS TO 200 lbs. Reliable and highly versatile hardware using precision-made components for trouble-free operation. KITS (complete, ready to install) include: ea 280 or pre-drilled track, in steel or 280A aluminum, 6 or 8 foot lengths 2 ea 284 nylon bodied, needle bearing, acetal wheel hangers ea 02N nylon guide 2 ea 60H clip stops (Kit components can be ordered individually) 200 lbs. max door weight New 2802A Bypass Track for Husky Sliding Door Hardware 5 6" 3 5 6" (84.) Order KITS based on material and length of track: Kit No. Material Max Leaf Size H200/6 steel track/6 ft. 96" x 36" x 2" H200/8 steel track/8 ft. 96" x 48" x 2" H200A/6 aluminum track/6 ft. 96" x 36" x 2" H200A/8 aluminum track/8 ft. 96" x 48" x 2" HARDWARE PACK (no. "H200PACK") = KIT w/o track: 2 ea 284 nylon bodied, needle bearing, acetal wheel hangers ea 02N nylon guide 2 ea 60H clip stops OPTIONAL EXTRAS include: 285 28 brackets - 5 each 287 track stop (bumper type) 285 hanger for metal doors 06R/94 roller guide (use w/) aluminum floor channel BYPASS PACK ALSO AVAILABLE (no. "HBP200PACK") F34 aluminum fascia - -3/4" thick doors F38 aluminum fascia - -3/8" thick doors 863 iron bow handle (5-/4" x -3/4") 400 aluminum flush pull (4-/4" x -7/8", 5/8" mortise) 44 aluminum flush pull (5-/4" x 2-/2", 3/4" mortise) 333 aluminum flush bolt (6" x -3/8") 3/4" FACE FIXED 28 SOFFIT FIXED 280A -3/6" 284 " 2-9/6" 3-/6" MAX 2-5/8" MIN 284 280 280 284 2-/4" MAX -7/8" MIN F34 Aluminum /2" MIN * F38 also available for -3/8" doors. Dimensions are 7/6" x 2-9/6"h. 96" MAX /4" 9/6" /4" 02N 02N 06R/94 3/6" 5
HUSKY GLASS 5 8 (4.3) 5 6 Track 280A Clip Stop 60H 4 3 4 (20.7) 5 6 6 Anti Lift Stop 284D Lock Nut 2 4 (57.2) Clamp F36 2 3 4 (69.8) 3 3 4 (95.3) CAPACITY Max. door weight: 65 lbs. (75kg) Max. door height: 7'0" (2400mm) Max. door width: 4'" (250mm) thickness: 5/6" (8mm) and 3 /8" (0mm) 8-0 mm (5/6"-3/8") APPLICATIONS Husky offers a solution to lightweight glass applications such as office doors and small glass partitions. 0mm (3/8") Only For Fixed Panel DOOR TYPES panels of 5 /6" (8mm) or 3 /8" (0mm) thickness in tempered or laminated glass. (25.4) 9 6 (39.6) Guide 608/60 Clamp kits contain: 2 hangers, 2 clamps, 2 end track stops and 2 floor mounted guides. Note: When using glass clamps in combination with protective coatings for glass surfaces such as Clear Shield, ensure that the glass surface to be clamped is not treated with the Clear Shield coating. TECHNICAL INFORMATION Track: 280A (extruded aluminum) Available in 6', 8', and 2' lengths Brackets: Face fix 28 5-pack 285 s: Soffit fixed track F36 Clamp Kits: For glass panels from 5/6" (8mm) up to 8/75/ Kit - 8mm 3/8" (0mm) 0/75/ Kit - 0mm Guides: Accessories: 5/6" (8mm) glass panels 608 - glass guide 3/8" (0mm) glass panels 60 - glass guide 60H retaining stop mounted within the track GLASS WEIGHT 5/6" glass 3.95 lbs./sq. ft. 3/8" glass 5.05 lbs./sq. ft. 6
PACER STRAIGHT SLIDING FOR TOP-HUNG WOOD AND METAL DOORS 9 6 (4.2) Bracket B Hole 9mm ( 3 /8") 2 (7.4) 9 6 (4.2) (25.4) 57B 3 6 (30.) 2 6 (52.3) DIA. DIA. 7 6 (.) 3 6 (4.7) 7 2 (90.5) 2 3 6 (55.6) Track 600 56BX 56B 5 6 (30.) (49.2) Hole Required mm Adjustment Nut Hole Required mm ( 7 /6") Lock Nut ( 7 /6") Lock Nut 5 7 6 (49.2) Adjustment Nut F200 F60 Door Thickness 3 8 5 6 (34.9) (49.2) Removable Roller Guide 04NX/94 Hole Required for Fixing Guide is 7mm ( /6") Removable Roller Guide 04N/94 Roller Guide 06N/94 3 6 (4.7) 3 8 2 (9.5) (2.7) Patent Washer Channel Channel 7
CAPACITY Max. door weight: 440 lbs. (200kg) Max. door height: 9'0" (3000mm) Door thickness: 3 /8"- 5 /6" (35mm-50mm) APPLICATIONS Combining performance and style with versatility, Pacer straight sliding in wood, glass, aluminum or metal is ideally suited for shop-fronts, offices and other stylish interiors. 57B Retaining Stop 60 52B 56BX 56B DOOR TYPES Wood doors for interior applications can be either solid or glazed. Metal doors can be of angle or box section. Aluminum is dependent on extrusion profile. TECHNICAL INFORMATION Track: Aluminum 600A Available in 6', 8', 0', and 6' lengths Brackets: Face fix B Jointing bracket BX s: Soffit fixed track F60 with standard return Face fixed track F200 with standard return comes in a satin anodized aluminum finish in lengths of 6', 8' and 0' s: Wood doors 57B - concealed fixing Wood doors 52B - angle plate fixing Aluminum/Metal doors 57B - concealed fixing Metal doors 56B - angle frame Metal doors 56BX - box frame Guides: Wood/Aluminum/Metal doors 89/2N - floor mounted guide Wood/Aluminum doors 06N/94 - concealed fixing Metal doors 04N/94 - angle frame Metal doors 04NX/94 - box frame Guide Channel: Brass 94 Aluminum Accessories: 94 channel available in 4'" (.5 meter) and 9'0" (3 meter) lengths. channel available in 6', 8', and 2' lengths. Retaining stop mounted within the track 60P (98.2) 66 5 5 6 6 7 3 4 9 6 9 6 7 3 4 (500) (500) Bracket B Clip Stop 60 Track 600 57B 52B Flush Pull 400 4 5 6 (049.3) Flush Bolt F375 Guide 06N Channel 8
PACER GLASS CAPACITY Max. door weight: 65 lbs. (75kg) and 285 lbs. (30kg) Max. door height: 9'0" (3000mm) Max. door width: 9'0" (3000mm) thickness: 5/6", (8mm) 3/8" (0mm) and /2" (2mm) APPLICATIONS The Pacer Door System accommodates both sliding and fixed door panels, making it ideal for interior dividers in offices and shops as well as modern buildings and complexes. DOOR TYPES panels of 5 /6" (8mm), 3 /8" (0mm) or /2" (2mm) thickness in tempered or laminated glass. For fixed glass panels an integrated track profile (600CFP) is available, allowing a sliding panel to pass alongside the fixed panel. A further option available is a clip-on profile (600FP) which attaches directly to the side of the track. This allows a combination of two fixed panels with a sliding panel. Clip-on fascia is available for both soffit fix and face fix situations. Clamp kits contain: 2 hangers, 2 clamps, 2 end track stops and 2 floor mounted guides. Note: When using glass clamps in the combination with protective coatings for glass surfaces such as Clear Shield, ensure that the glass surface to be clamped is not treated with the Clear Shield coating. TECHNICAL INFORMATION Track: 600A 600CFP combination profile - track and fixed glass panel 600FP fixed glass panel profile All profiles available in 6', 8', 0', and 6' lengths Brackets: Face fix B Jointing bracket BX s: Soffit fixed track F60 with extruded return Face fixed track F200 with extruded return Clamp Kits: 5 /6" (8mm) glass panels 65 lbs. (75kg) capacity 8/75 Kit 286 lbs. (30kg) capacity 8/30 Kit 3/8" (0mm) glass panels 65 lbs. (75kg) capacity 0/75 Kit 286 lbs. (30kg) capacity 0/30 Kit /2" (2mm) glass panels 65 lbs. (75kg) capacity 2/75 Kit 286 lbs. (30kg) capacity 2/30 Kit Accessories: Sliding door lock for glass panels 68 ( 3 /8" (0mm) and /2" (2mm) glass only) Track stop HH3/290 Retaining stop mounted 60P within the track GLASS WEIGHT 3/8" glass 5.05 lbs./sq. ft. /2" glass 6.4 lbs./sq. ft. 9
PACER GLASS See capacity section on page 9 for min./max. heights and weights. GLASS WEIGHT 3/8" glass 5.05 lbs./sq. ft. /2" glass 6.4 lbs./sq. ft. Track 600 Fixed Profile 600FP Combination Profile 600CFP F60 7 6 (36.5) 6 (26.9) 8mm-0mm-2mm Guide 608 60 62 (25.4) Channel Packing 3 /6" (5mm) Face Fix Bracket B Combination Profile 600CFP Fixed Profile 600FP 600FP Track 600A F200X 7 3 8 (87.3) F200 7 6 (36.5) 5 8 (4.3) 8mm-0mm-2mm Guide 608 60 62 Channel 0
Retaining Stop 60P Track 600A 2 3 6 (55.6) 5 (47.6) Anti Lift Stop 2 2 (63.5) 3 6 (77.8) Adjustable Nut Lock Nut Clamp Gasket Clamp 30/8-0-2mm 2 4 (3.8) 7 7 8 (200) 23 8 (60.3) 2 2 (63.5) 3 6 (77.8) 2 2 3 6 2 4 (57.2) Clamp 75/8-0-2mm Sliding Door Lock 68 R=8 ( 5 /6") 2 3 4 (69.9) 3 3 4 (92.3) 6 8 (55.6) 4 5 6 (25.4) 8mm-0mm-2mm 66 (98.2) 2 3 6 (55.6) 5 6 7 3 4 9 6 (500) 9 6 (500) 7 3 4 5 6 Bracket Face Fix B (BX) 3 5 6 (00) Clamp 30/8-0-2mm F200X Clip Stop 60P Sliding Panel Fixed Lock 68 4 5 /6" (050) Guide 608/60/62 Channel (25.4) 9 6 (39.9)