RCSeries DUO, SingleActing s From left to right: RC, RC, RC0, RC4, RC000, RC, RC00 The Industry Standard General Purpose Saddles All RC cylinders are equipped with hardened removable grooved saddles. For tilt and flat saddles, see the RCSeries accessory page. 0 Unique GR Bearing Design, reduces wear, extending life Collar threads, plunger threads and base mounting holes enable easy fixturing (on most models) Designed for use in all positions High strength alloy steel for durability Redesigned cylinder thread protector for ease of use Heavyduty, pretensioned spring improves retraction speed Baked enamel finish for increased corrosion resistance CR400 coupler and dust cap included on all models wiper reduces contamination, extending cylinder life. Base Plates To ensure the stability of cylinders for lifting applications, base plates are available for 0, and ton RC cylinders. Specialty Attachments For solving all kinds of application problems, specialty attach ments are available for, 0 and ton RC cylinders. 0 Stage lifting set up in Greece, where assembled pipes, meters in length, were stage lifted with six RC4 cylinders. RC cylinder mounting attachments greatly extend the application possibilities (available for, 0, and ton cylinders).
SingleActing, General Purpose s GR Bearing Technology The exclusive GR is a unique bearing design on RCSeries DUO cylinders which absorbs eccentric load stresses to protect your cylinder against abrasion, overextending or plunger blowouts and jamming or topend mushrooming. As a result, RCSeries DUO cylinders provide long, troublefree operation. RC Series QUICK SELECTION CHART For complete technical information see next page. ton (kn) Stroke Effective Area (cm ) Oil (cm ) Collapsed (4) 0 (0) (4) () 0() 4 0 0 04 0 0 4 0 0 8 0 0 RC RC RC RC* RC RC RC0 RC0* RC04 RC0* RC08 RC00* RC0 RC04 RC RC RC4* RC* RC8 RC RC RC4 RC RC* RC4* RC* RC8 RC0 RC RC4* RC08 RC,,,,,, 4, 4, 4, 4, 4, 4, 4, 4, 4,, 0 8 8 4 04 0 08 4 8 8 0 0 880 4 0 8 4 4 400 4 4 4 00 4 4 4 4 0 RC4, () RC*, (8) () 8 0 RC RC RC RC00 RC000, 0, 0,,, 0 4 4 40 4 * Available as set, see note on this page. RC cylinder has a non removable grooved saddle and no collar thread. www.enerpac.com (kg),0,0,,,4,8,8,, 4,4,4,4,8, 4,,0,8, 0,,8,,4 0,0, 4,,, 8,,0,,,,,0,0, : ton Stroke: mm Maximum Operating Pressure: 00 bar Think Safety Manufacturer s rating of load and stroke are maximum safe limits. Good practice encourages using only 80% of these ratings. 40 Lightweight Aluminium s If you need a higher cylinder capacitytoweightratio the RACSeries are the perfect choice. Gauges Minimize the risk of overloading and ensure long, dependable service from your equipment. Refer to the System Components Section for a full range of gauges. 8 Pump Sets All cylinders marked with an * are available as sets (cylinder, gauge, couplers, hose and pump) for your ordering convenience.
RCSeries DUO, SingleActing s Speed Chart See the Enerpac Speed Chart in our Yellow Pages to determine your approximate cylinder speed. 4 RC RC0 only (U = mm) RC RC RC00, RC000 8 For full features see previous page. ton (kn) (4) 0 (0) (4) () 0() () (8) () Stroke 4 0 0 04 0 0 4 0 0 8 0 0 0 8 0 RC RC RC RC* RC RC RC0 RC0* RC04 RC0* RC08 RC00* RC0 RC04 RC RC RC4* RC* RC8 RC RC RC4 RC RC* RC4* RC* RC8 RC0 RC RC4* RC08 RC RC4 RC* RC RC RC RC00 RC000 Effective Area (cm ),,,,,, 4, 4, 4, 4, 4, 4, 4, 4, 4,,,,, 0, 0,,, Oil (cm ) 0 8 8 4 04 0 08 4 8 8 0 0 880 0 4 4 Collapsed A 4 0 8 4 4 400 4 4 4 00 4 4 4 4 40 4 Extended B 4 4 4 40 0 04 80 4 00 0 4 80 4 8 8 0 * Available as set, see note on page. RC cylinder has a non removable grooved saddle and no collar thread. * D = 4 mm, L = 0 mm, M = mm. Outside D 8* 8 8 8 8 8 8 8 8 0 4 4
SingleActing, General Purpose s Couplers Included! CR400 couplers included on all models. Fits all HCSeries hoses. : ton Stroke: mm Maximum Operating Pressure: 00 bar RC Series Bore E F Base to Adv. Port H Saddle J Saddle Protr. from Plgr. K Internal O Length P Bolt Circle U Base Mounting Holes V Thd. Depth Z Collar W Collar Length X (kg),,,,,, 4, 4, 4, 4, 4, 4, 4, 4,,8,8,8,8,8,8,8,8,0,0,0,0,0,0,0,0,,,,, 4, 4, 0, 0,,4,4,4,4,4,4,,,,,,,, 4,4 4,4 4,4 4,4 4,4 4,4 4,4 4,4,,,,,,,,,,,,,,, 04, 04, 0 0 4 4 0 0 0 0 0 0 0 0 0 / 4 " un / 4 " un / 4 " un / 4 " un / 4 " un #0 4 un " 8 un " 8 un " 8 un " 8 un " 8 un " 8 un " 8 un " 8 un " 8 un " 8 un " 8 un " 8 un " 8 un " 8 un " 8 un / " un / " un / " un / " un / " un / " un / " un / " un / " un 4 4 4 8 8 8 8 8 8 8 8 40 40, mm / 4 " 0 un / 4 " 0 un / 4 " 0 un / 4 " 0 un / 4 " 0 un / " 8 un / " 8 un / " 8 un / " 8 un / " 8 un / " 8 un / " 8 un / " 8 un / 8 " un / 8 " un / 8 " un / 8 " un / 8 " un / 8 " un / 8 " un / 8 " un / " un / " un / " un / " un / " un / " un / " un / " un / " un / " un / " un / " un /4" 0 un /4" 0 un 4 4 4 4 4 / " un / " un / " un / " un / " un / 4 " 4 / 4 " 4 un / 4 " 4 un / 4 " 4 un / 4 " 4 un / 4 " 4 un / 4 " 4 un / 4 " 4 un / 4 " un / 4 " un / 4 " un / 4 " un / 4 " un / 4 " un / 4 " un / 4 " un / " un / " un / " un / " un / " un / " un / " un / " un / " un " un " un " un " un / 4 " un / 4 " un / 8 " un / 8 " un 0 0 0 0 0 0 0 0 4 4 4 4 4 4 4 4 4,0,0,,,4,8,8,, 4,4,4,4,8, 4,,0,8, 0,,8,,4 0,0, 4,,, 8,,0,,,,,0,0, RC RC RC RC* RC RC RC0 RC0* RC04 RC0* RC08 RC00* RC0 RC04 RC RC RC4* RC* RC8 RC RC RC4 RC RC* RC4* RC* RC8 RC0 RC RC4* RC08 RC RC4 RC* RC RC RC RC00 RC000 www.enerpac.com
Accessories SELECTION CHART For use with Saddles Base Plate Mounting Block Clevis Eyes Flat Grooved ) Tilt Base 4) ton (kn) (4) 0 (0) (4) () 0 () () (8) () AF ) A ), A0F ) A ) A ) AG ) A0G ) AG AG AG CAT0 ) CAT0 CAT CAT CAT00 CAT00 CAT00 JBI0 JBI JBI RB ), AW ), AW ) RB0, AW0 RB RB RB REB ) REB0 REB REB REP ) REP0 ) REP0 REP REP ) Standard on 0 ton RCcylinders ) Except RC ) Except RC0 4) Mounting screws are included. ) Used with Bender Sets. DIMENSION CHARTS AF A0F A A AG A0G AG AG Saddle Dimensions AF, Tilt Saddle Dimensions A0F A B C A B C Flat Grooved 8 UNC / UNC A, A CAT0 CAT CAT00 Tilt Tilt 4 JBI0 JBI Base Plate Dimensions Dimensions A B C D E 40 8 8 0 JBI 04 JBI0, JBI RB AW AW RB0 AW0 RB RB Mounting Block Dimensions A B C D E F G H 88 0 4 00 0 88 8 4 0 4 0 4 /4" un /4"0 un /"0 un 4 0 8 /"un /"un /"un /4"4un /4"4un /4"un /"un RB, 0 RB, AW AW AW0 (I=4,8) Type REB 4 4 0, Base 4) REB0 8,0 REB 8,0 REB REP 4 4 4 8, REP0 4 REP REB REP 4) Mounting screws are included. * Pin to Pin REB and REP Clevises fitted. Add cylinder collapsed height. 0 Clevis Eye Dimensions A B C D E F PintoPin *