AAM 9.25 14 Bolt Front Fits 2003 and newer 4WD Dodge Ram 2500 & 3500 Part # 10740 AAM 10.5 Fits 2003 and newer Dodge Ram 2500 & 3500 with std output diesel or Hemi engines. Part # 10302 Dana 44 Top Fill 10 Bolt Front and Rear Fits many Jeep, 66-79 Ford F250/ F350 & Bronco front, 94-01 Ram 1500 front. Volume: 0.25 qt. Part # 9516 Dana 44 Front Fill 10 Bolt Front and Rear Fits Jeep 1941-present, Ford Trucks 1966-1979. Volume: stock - 0.25 qt. Part # 5055 Dodge Corp. 8.25 Fits 1990 & newer Dakota, 1990-2004 Durango, Jeep Liberty, some Cherokees. Volume: 0.75 qt. Part # 9864 Dodge Corp. 9.25 Fits Ram 1500, some Dakotas and Durangos. Volume: 0.7 qt. Part # 9518 AAM 11.5 Fits 2003 and newer Dodge Ram 2500 & 3500 with high output diesel engines. Volume: 0.75 qt. Part # 10361 Dana Super 44/226 Fits 2006-2010 Jeep Grand Cherokee SRT8 and Commander. Volume: 0.7 qt. Part #11045 Ford 7.5 Fits many Ford Rangers, Bronco IIs, Mustangs. Volume: 0.4 qt. Part # 9593 AAM 11.5 Fits 2001 and newer GM Silverado & Sierra 2500HD & 3500 with Duramax or 8.1. Part # 9511 Dana 50, 60 10 Bolt Front Fits 99 and newer Ford F250/F350, 94-02 Dodge Ram 2500/3500. Volume: 0.6 qt. Part # 10737 Ford 7.5 Fits many Ford Rangers, Bronco IIs, Mustangs. Volume: 0.4 qt. Part # 7043 Dana Spicer 20 Fits Jeep CJ 5 and CJ 7, 1976-1985. Part #5048 Dana 50, 60 10 Bolt Front Fits 66-97 Ford F250 & F350 & 75-99 Dodge 1 ton trucks. Volume: 0.6 qt. Part # 6063 Ford 8.8 Fits many F150, Ranger, Explorer, and some Mustang. Volume: 0.6 qt. Part # 9519 Dana 25, 27, 30 10 Bolt Fits many Jeeps, Pre-1970s Broncos Volume: stock Part # 5058 Dana 60, 70 Fits 2002 & older Dodge Ram 2500, Ford E250/E350, many others. Part # 9426 Ford 8.8 Fits many F150, Ranger, Explorer, and some Mustang. Volume: 0.6 qt. Part # 7064 Dana 35 Fits 1985-2001 Jeep Wrangler & some Cherokee. Part # 5062 Dana 80 Fits 99 & newer Ford F350 Dually, 02 & older Dodge Ram 3500, 95-00 GM Dually. Volume: 0.75 qt. Part # 9520 Ford 9.75 Fits F150, Supercrew, and some Expedition. Part # 9594
Ford 9.75 Fits F150, Supercrew, and some Expedition. Part # 7092 Ford 10.25, 10.5 Fits Ford F250 & SRW F350, Excursion Part # 9513 GM 8.5, 8.625 Fits C/K1500, Silverado & Sierra 1500, 1/2 ton Tahoe, Yukon, Avalanche, & Suburban Part # 10815 GM Torsen Fits 2003-2006 SSR with automatic, some Colorado, Canyon, Envoy, Trailblazer. P/N 11035 Ford 10.25, 10.5 Fits Ford F250 & SRW F350, Excursion. Part # 7086 GM 8.875 Truck Fits 1963-1982 GM C/K Truck, Blazer, Suburban. Part # 6058 Ford 10.25, 10.5 Fits Ford F250 & SRW F350, Excursion Part # 10816 GM 8.875 Car Fits 67-72 Camaro, 65-72 Chevelle, and El Camino. Part # 6027 GM 7.5, 7.625 Fits 83-04 GM S10/ S15, 82 & newer Camaro & Firebird. Part # 9401 GM 9.5 Fits Silverado & Sierra 1500HD & 2500, C/K2500, Suburban. Part # 9504 GM 10.5 Fits Silverado & Sierra 2500HD & 3500 with 6.0, C/K2500 & 3500. Part # 9369 GM 7.5, 7.625 Fits 83-04 GM S10/ S15, 82 & newer Camaro & Firebird. Part # 6086 GM 9.5 Fits Silverado & Sierra 1500HD & 2500, C/K2500, Suburban. Part #6070 GM 10.5 Fits Silverado & Sierra 2500HD & 3500 with 6.0, C/K2500 & 3500. Part # 6060 GM 8.5, 8.625 Fits C/K1500, Silverado & Sierra 1500, ½ ton Tahoe, Yukon, Avalanche, & Suburban. Part # 6082 GM 9.5 Fits Hummer H2, Silverado & Sierra 1500HD & 2500, C/K2500. Part # 10303-2 Nissan Titan Fits 2004 & Newer Titan Volume: 0.75 qt. Part # 10756
Dodge 727, 518 (46RH, 46RE), 618 (47RH, 47RE), 48RE - Fits 2007 & older Ram with diesel, V10, & 5.9 gas, 2003 & older Dakota, Durango & Van with 5.9.. Part # 9393 Dodge A500, 42RE, 44RE, 40RH, 42RH Fits Dakota & Ram 1500 with V6 or 5.2 V8, Jeep Cherokee & Grand Cherokee with this transmission. over stock, Part # 9862 Dodge 42RLE Fits many 2004 & newer Jeep Wrangler & Liberty, Dodge Dakota, Durango & Nitro. Volume: 1-1 1/2 qts, Part # 11044 2.5 for 4WD. Part # 10304 Dodge 68RFE, 545RFE, 45RFE Fits some Ram 1500, 2WD Dakota & Durango, Jeep Grand Cherokee & Liberty CRD. Volume: 3.1 qts. for 2WD, Dodge 68RFE, 545RFE, 45RFE Extra Fits 2007 & newer Ram 2500 or 3500 diesel with 6 speed automatic, some Ram 1500 and Jeep. Volume: 4.5 qts. for 2WD, 4 qts for 4WD. Part # 11039 Ford C4 Fits 1965-1981 vehicles with C4 trans. Outside depth 4.3". Part # 10453-1 Case Fill Part # 10453-2 Pan Fill Ford A4LD, 5R55E Fits 1985-2001 Bronco II, Explorer, Ranger, Mustang, Aerostar. Volume: 3 qts.. Part # 9614-2 Ford AOD, AODE Fits 1981-1992 Mustang, Thunderbird, Crown Vic, LTD. Volume: Stock to 0.5 qt.. Part # 9324-1 AOD or 9324-2 AODE Ford AOD, AODE, 4R70W, 4R75W Fits 1981- current F150, E150, Expedition, 81-95 Mustang. Volume: 2-2.5 qts.. Part # 9685-1 AOD or 9685-2 AODE, 4R70 Dodge 68rfe, 545rfe, 45rfe with Step, Fits Ram 1500 Hemi, Dakota, Durango, and Jeep. Volume: stock. Part # 11078 Dodge 68rfe, 545rfe, 45rfe with Step, Fits Ram 1500 Hemi, Dakota, Durango and Jeep.. Part # 11079 Ford C6 Fits 1960s and 70s full size cars (Torino, Thunderbird, Galaxie). Volume: Stock Part #11064 Ford C6 Fits 1988 and older F250 & F350, E350, motorhomes, and Bronco. Volume: 2.5 qts. Part # 9592 Ford E40D, 4R100 2WD & 4WD Fits 1989-2004 F250, F350, E350, Excursion, Lincoln Navigator. Volume: 3-3.5 qts.. Part # 9323 Ford 5R110 Torq-Shift Fits 2003-2007 F250, F350, E350. Volume: 4.5 qts.. Part # 9973
Ford 5R110 TorqShift Late Model, Fits some 2008-present F250, F350, E350. Volume: 4 qts.. Part #11049 GM Turbo 350 Fits vehicles with the TH350 transmission. Outside depth 2 3/8". Volume: stock Part # 9589 GM Turbo 350 Fits vehicles with the TH350 transmission. Outside depth 3 3/4". Part # 9684 GM 700R4, 4L60, 4L60E, 4L65E, 4L70E - Early Model Fits GM vehicles with these transmissions. Volume: 4 qts.. Part # 8650-1 C5 Corvette 4L60E Fits 1997-2004 C5 Corvettes. Fill port on the side of the pan. Volume: 4 qts. Part # 8650-3 GM 700R4, 4L60E, 4L65E, 4L70E - Late Model Clears exhaust cross-over and frame cross members.. Part # 9427 GM 4L80E, 4L85E - Early Model Fits GM vehicles with 1996 and older trans. Outside depth 4". Volume: 3.75 qts.. Part # 9167 GM 4L80E, 4L85E - Late Model Fits 1997 & newer C/K 2500 & 3500, Silverado 1500HD, 2500 & 3500. Volume: 3.25 qts.. Part # 9437 GM 6L80 Fits 2006 & newer GM cars. Volume: stock. Part # 11087 GM Turbo 400 Fits vehicles with the TH400 transmission. Outside depth 2". Volume: stock Part # 9591 GM 200-4R Fits 1982-1990 Buick, Chevrolet, and other GM vehicles. Volume: Stock. Part #11070 GM 6L80 Fits 2006 & newer GM trucks and SUVs.. Part # 11025 GM Turbo 400 Fits vehicles with the TH400 transmission. Outside depth 3 3/8". Part # 9683 GM 200-4R Fits 1982-1990 Buick, Chevrolet and other GM vehicles, outside depth 3 3/4". Volume: 2.5 qts.. Part # 9917 Allison 1000 Fits 2001 & newer Silverado & Sierra 2500HD & 3500 with Duramax & 8.1. Volume: 3.25 qts.. Part # 9517 GM 425 FWD Transaxle Fits 1966-1978 Olds Toronado, 1967-1978 Cadillac Eldorado. Volume: stock, Part # 7873 GM 4T60E, 4T65E Fits 1990s & newer front wheel drive GM cars. Volume: stock. Part # 10758 Nissan RE5- RO5A Low Profile Fits 350Z, Infiniti, Titan.. Part # 11091 GM 700R4, 4L60, 4L60E, 4L65E Fits cars with these transmissions. Outside depth 2 7/8". Volume: stock. Part # 9297 GM 4L80E, 4L85E Fits GM vehicles with these trans. Outside depth 3 3/8". Volume: 1.5 qts.. Part # 9313 Nissan RE5- RO5A Fits Titan, Armada, 2005 & newer V6 Frontier, Pathfinder, and Xterra. Volume: 3.5 qts.. Part # 11037
Center Bolt Small Block Chevrolet LS1/LS6 Fits 3rd Gen small block heads 1997 and newer. Raised fins & 2 bolt mounting. Breather and PCV holes machined on intake manifold side. Cast in baffling. Extensions available for relocating coil packs. Part # 10413 Small Block Corvette with Vintage Script & Fins Raised Corvette script lettering and 7 fins. Standard perimeter mount style for 1959-1986 cylinder heads. Mid height design clears most roller rockers. Location on intake side can be machined for pcv & breathers. Part # 11026 pad for old Ford script emblem Raised fins and pad for old Ford script emblem (sold separately). Perimeter mount style for pre- 1986 heads. Mid height design clears roller rockers. Location on intake manifold side can be machined for PCV/breathers. Part # 8357-7 Center Bolt Small Block Chevrolet Fits 1987-1998 center bolt style heads. Raised fins & 2 bolt mounting. Location on intake manifold side can be machined for PCV/ breathers. Cast in baffling. Slightly taller than stock to allow roller tip rockers. Part # 10534 Small Block Corvette with Staggered Bolt Pattern Raised Corvette script lettering and 7 fins. Staggered perimeter mount style for 1955 to early 1959 cylinder heads. Mid height design clears most roller rockers. No provision for pcv/breather or oil fill. Part # 11027 Big Block Corvette Raised CORVETTE script and fins. Stock height, perimeter mount, PCV & breather holes. Cast-in internal oil drips. Left side brake booster relief. As-cast, powder coated, or polished. Part # 9096 Center Bolt Small Block Chevrolet Fits 1987-1998 center bolt heads. Raised Chevrolet script lettering and fins. Two bolt mounting. Cast-in baffling, location on intake manifold side can be machined for PCV/breathers. Slightly taller than stock to allow roller tip rockers. Part # 11040 Chevrolet Script Raised CHEVROLET script. Perimeter mount style pre-1986 heads. Mid height design clears roller rockers. Location on intake manifold side can be machined for PCV/ breathers. Part # 8357-1 Tall Big Block Corvette Raised CORVETTE script and fins. 3/8" taller than stock to clear most roller rockers. Perimeter mount, with PCV & breather holes. Cast-in baffling. As-cast, powder coated, or polished. Part #11042 Center Bolt Small Block Corvette Fits 1987-1998 center bolt heads. Raised Corvette script lettering and fins. Two bolt mounting. Cast-in baffling, location on intake manifold side can be machined for PCV/breathers. Slightly taller than stock to allow roller tip rockers. Part # 11041 Vintage Chevrolet Script & Fins Raised CHEVROLET script and 7 fins. Perimeter mount style for pre 1986 heads. Mid height design clears most roller rockers. Location on intake manifold side can be machined for PCV/breathers. Cast in baffling. Part # 10430 Staggered Bolt Pattern Raised Chevrolet script lettering and 7 fins. Staggered perimeter mount style for 1955 to early 1959 cylinder heads. Mid height design clears most roller rockers. No provision for pcv/breather or oil fill. Part # 11029 Corvette Script Raised CORVETTE script. Perimeter mount style pre-1986 heads. Mid height design clears roller rockers. Location on intake manifold side can be machined for PCV/ breathers. Part # 8357-2 Cadillac Script Raised CADILLAC script. Perimeter mount style pre-1986 heads. Mid height design clears roller rockers. Location on intake manifold side can be machined for PCV/breathers. Part # 8357-3 pad for oval Ford emblem Raised fins and pad for oval Ford emblem (sold separately). Perimeter mount style for pre-1986 heads. Mid height design clears roller rockers. Location on intake manifold side can be machined for PCV/breathers. Part # 8357-6 Big Block Chevrolet Raised CHEVROLET script and fins. Stock height, perimeter mount, PCV & breather holes. Cast-in internal oil drips. Left and right are symmetrical. As-cast, powder coated, or polished. Part # 9737 Tall Big Block Chevrolet Raised Chevrolet script and fins. 3/8" taller than stock to clear most roller rockers. Perimeter mount, with PCV & breather holes. Cast-in baffling. As-cast, powder coated or polished. Part # 9739 348, 409 Chevrolet Valve covers feature raised CHEVROLET script and fins, strong sand-cast aluminum construction, thick walls and gasket flanges that will not bend when bolts are tightened. Part # 10651 General Motors Trademarks are used under license to PML. Inc.
331, 365, 390, 429 Cadillac Raised fins and CADILLAC script. Thick gasket flange. Taller than stock. Fits many 1950-1967 Cadillac engines. Part #11073 Dog Bone style with CADILLAC script & fins milled into the top surface. Open interior clears roller rockers & stud girdles. PCV/ breather/oil fill holes optional. Available in as-cast, powder coated or polished. Part # 7872-4 Buick Nailhead V8 Smooth Side For 1953 to 1966 Buick 264, 322, 364, 401, 425 engines. Part # 11080-1 Flat Top style. Heavy duty valve cover. Open interior clears roller rockers & stud girdles. PCV/breather/oil fill holes optional. Available in as-cast, powder coated or polished. Part # 7872-1 Flat Top style with small CADILLAC script milled into the top surface. Open interior clears roller rockers & stud girdles. PCV/breather/oil fill holes optional. Available in as-cast, powder coated or polished. Part # 7872-5 Buick Nailhead V8 Fins & Vintage Script For 1953 to 1966 Buick 264, 322, 364, 401, 425 engines. Part # 11080-2 Flat Top style with big CADILLAC script milled into the top surface. Open interior clears roller rockers & stud girdles. PCV/ breather/oil fill holes optional. Available in as-cast, powder coated or polished. Part # 7872-2 Jeep 258 Cu In, 4.2L Straight 6 Strong thick-wall construction. Machined for PCV, breather and oil fill. Available in as-cast and powder coated finishes. Part # 8656. Buick Nailhead V8 Full Fin For 1953 to 1966 Buick 264, 322, 364, 401, 425 engines. Part # 11080-3 General Motors Trademarks are used under license to PML. Inc. 368, 425, 472, 500 Cadillac "Flat Top" style with big CADILLAC script cast-in so it is raised above top surface. Open interior clears roller rockers & stud girdles. PCV/breather/oil fill holes optional. Available in as-cast or powder coated. Part # 7872-8 Dog Bone style. Heavy duty valve cover. Open interior clears roller rockers & stud girdles. PCV/breather/oil fill holes optional. Available in as-cast, powder coated or polished. Part # 7872-3 H1 Hummer Switch Covers Replacement bezels for door window switches, with 1 and 2 button openings, in tumbled aluminum and black. Part # 9445-1, 9445-2, 9445-4 Machining, Grommets and Push-In Breathers available. Valve Cover Accessories: Oil Caps (polished or brushed aluminum) Coil Extensions # 11083 Push-In Breathers and Grommets Plus Machining for oil fill, PCV, and breathers