Technische Technical specifi Daten cation Kaltfräse Surface Miner W 200 2500 SM
Technical specification Surface miner 2500 SM Cutting drum Cutting width, max. 2,500 mm Cutting depth * 0 600 mm Number of cutting tools Depending on application Drum diameter with tools 1,500 mm Drum inclination max. 4 Engine Engine manufacturer Cummins Type QST 30 Cooling Water Number of cylinders 12 Rated power 783 kw / 1,050 HP / 1,065 PS Engine speed 2,100 min -1 Displacement 30,500 cm 3 Fuel consumption, full load 191.5 l / h Fuel consumption, 2 / 3 load 127.6 l / h Driving performance Operating speed 0 to 25 m / min Travel speed 0 to 3.9 km / h Theoretical gradeability 20 % Lateral inclination, max. 8 % Crawler tracks Crawler tracks, front (L x W x H) 2,920 x 400 x 970 mm Crawler tracks, rear (L x W x H) 2,920 x 400 x 970 mm Filling capacities Fuel tank 2,400 l Hydraulic oil tank 500 l Water tank 2,800 l Electrical system Control system 24 V Lighting system 24 V Conveyor system Belt width of primary conveyor 1,400 mm Belt width of discharge conveyor 1,400 mm Shipping dimensions for overland transport Packing unit No. 1: Module 1 (machine frame, track units, engine station, primary conveyor, 12,800 x 3,470 x 3,400 mm operator s cabin) (L x W x H) Packing unit No. 2: Module 2 (slewing ring, conveyor suspension, counterweight, transport box 15,700 x 2,750 x 3,400 mm with various attachment parts) and module 3 (discharge conveyor) (L x W x H) Shipping dimensions for sea transport Packing unit No. 1: Module 1 (machine frame, track units, engine station, primary conveyor, 12,800 x 3,470 x 3,400 mm operator s cabin) (L x W x H) Packing unit No. 2: Module 2 (slewing ring, conveyor suspension, counterweight, transport box 6,400 x 2,700 x 3,350 mm with various attachment parts) (L x W x H) Packing unit No. 3: Module 3 (discharge conveyor) (L x W x H) 12,300 x 2,300 x 1,700 mm * = The maximum cutting depth may deviate from the value indicated due to tolerances and wear.
Dimensions in mm 22,700 4,300 7,500 11,300 R 8,500 400 4,935 2,920 5,195 3,545 970 8,740 90 1,900 1,840 3,470 39 2 // 3
Transport modules of surface miner 2500 SM for transport by land Dimensions in mm Packing unit No. 1: Module 1 (machine frame, track units, engine station, primary conveyor, operator s cabin) 12,800 3,400 11,800 Packing unit No. 2: Module 2 (slewing ring, conveyor suspension, counterweight, transport box with various attachment parts) and module 3 (discharge conveyor) 15,700 3,400
Transport modules of surface miner 2500 SM for sea transport Dimensions in mm Packing unit No. 1: Module 1 (machine frame, track units, engine station, primary conveyor, operator s cabin) 12,800 Packing unit No. 2: Module 2 (slewing ring, conveyor suspension, counterweight, transport box with various attachment parts) 6,400 Packing unit No. 3: Module 3 (discharge conveyor) 12,300 1,700 3,350 3,400 4 // 5
Machine weights surface miner 2500 SM Empty weight of machine in standard design without filling media 109,100 kg Operating weight, CE * 111,600 kg Operating weight, max. (full tanks, full range of equipment) 118,000 kg Weights of filling media Water tank filling in kg 2,800 kg Diesel tank filling in kg (0.83 kg / l) 1,992 kg Weights of shipping modules Overland transport Weight of packing unit No. 1: Module 1 (machine frame, track units, engine station, primary conveyor, operator s cabin) 82,850 kg Weight of packing unit No. 2: Module 2 (slewing ring, conveyor suspension, counterweight, transport box with various attachment parts) and module 3 (discharge conveyor) 28,450 kg Sea transport Weight of packing unit No. 1: Module 1 (machine frame, track units, engine station, primary conveyor, operator s cabin) 82,850 kg Weight of packing unit No. 2: Module 2 (slewing ring, conveyor suspension, counterweight, transport box with various attachment parts) 23,800 kg Weight of packing unit No. 3: Module 3 (discharge conveyor) 4,650 kg * = Machine in standard design, half-full water tank, half-full fuel tank, driver (75 kg), on-board tools.
Equipment features of surface miner 2500 SM Standard equipment: Basic machine with engine Rigid welded design with integrated tanks for fuel, water and hydraulic oil Standard painting in Wirtgen white with orange stripes Fold-down cabin for transport Cutting drum housing Cutting drum housing for cutting width 2,500 mm, excluding FCS features Hydraulically lifting side plates Water spray bar in drum housing Cutting drums Cutting drum, cutting width 2,500 mm, HT15, tool spacing 45 mm, drum diameter with tools 1,500 mm Loading of cut material Discharge conveyor, 11.30 m long Water spray bar at slewing ring and discharge conveyor Continuously adjustable belt speeds Belt tension of discharge conveyor is maintained via grease cylinders Machine and levelling control Clearly structured main control panel with functional switches integrated in driver s seat LEVEL PRO automatic levelling system including control panel and wire-rope sensors for cutting depth adjustment mounted at the side plates, left and right Operator s platform Individually adjustable, rotating comfort driver s seat Two mirrors, front Air-conditioning system Chassis and height adjustment Four full-floating track units suspended from parallelogram guides Track units with double grouser track pads Four-track steering with three selectable steering modes Track units are driven via planetary gearbox with hydraulic motor each Separate hydraulic variable displacement pumps for the front and rear track units Continuously adjustable advance speeds from zero to maximum speed in both operating and travel gear Height adjustment via hydraulic cylinders Miscellaneous Lighting package including 10 Xenon working lights plus 1 halogen working light for walkway Optional equipment: Basic machine with engine Tested FOPS cabin roof with access Special painting in one, two or several colours Hydraulically operated water tank filling pump Hydraulically operated high-pressure water cleaner Additional water tank, 1,000 l, in filling funnel design Hydraulically operated cutting tool extractor Diesel fuel quick-filling system Cutting drums Cutting drum, cutting width 2,500 mm, HT14, tool spacing 45 mm, drum diameter with tools 1,400 mm Cutting drum, cutting width 2,500 mm, HT14, tool spacing 45 mm, drum diameter with tools 1,500 mm Cutting drum, cutting width 2,500 mm, HT14, tool spacing 45 mm, drum diameter with tools 1,400 mm, in armoured design Cutting drum, cutting width 2,500 mm, HT15, tool spacing 45 mm, drum diameter with tools 1,500 mm, in armoured design Consult factory for special drums customized to specific applications Loading of cut material Cut material is deposited in a windrow between the rear track units Operator s platform Screen system including two cameras and display on two additional screens Miscellaneous Fire-extinguishing system Central lubrication system Two additional Xenon working lights at discharge conveyor 20-ft. workshop container including workbench and cabinets / shelves Extended tool kit Reversing lights 12-V power supply 6 // 7
Illustrations are without obligation. Technical details are subject to change without notice. Performance data depend upon operating conditions. No. 2176459 26-20 EN-01/12 by Wirtgen GmbH 2012. Printed in Germany Wirtgen GmbH Reinhard-Wirtgen-Strasse 2 53578 Windhagen Germany Phone: +49 (0) 26 45 / 131-0 Fax: +49 (0) 26 45 / 131-242 Internet: www.wirtgen.com E-Mail: info@wirtgen.com