Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: Lano Equipment - Anoka Scott Fahey 6140 Hwy 10 NW Anoka, MN 55303 763-323-1720 888-448-5266 763-422-3949 scott_f@lanoequip.com www.lanoequip.com Version of Excel used: Furnish separate price quote for: EXCAVATOR 1.1 Make & Model Operating Weight Engine Make & Model Tier 3, 3i, or 4 Compliant? HP at rated RPM (specify net or gross) Number of speeds Max travel speed, MPH Drawbar pull, lbs. Shoe width, in. # of rollers on lower track Ground pressure, PSI Ground clearance, in. Overall width of excavator Main pump(s) total flow, GPM Swing speed, RPM Boom length, ft-in Arm length, ft-in Arm breakout force, Normal, lb-ft Max dig depth, ft-in Reach at ground line, ft-in Dump height, ft-in Lift over end, 8, lbs. Lift over end, max reach, lbs. Lift over side, 8, lbs. Lift over side max reach, lbs. Bucket breakout force, normal lb-ft. Tail swing radius, ft-in. Does excavator include bucket? If so, description Warranty Price
http://www.kubota.com/product/kx040/kx040.aspx 2010 Kubota KX040-4 9,017 LBS Kubota D1803-CR-TE4 Tier 4 42.4 GROSS / 2,200 RPM 2 SPEEDS 1.8 / 3.1 9,747 LBS 13.8" 4 ROLLERS 4.33 PSI 12.99 INCHES 5' 6.9" 24.4 GPM 2 VARIABLE, 1 GEAR 9.2 RPM INA INA 4,112 FT/LBS 11' 2.6" 17' 9" 12' 9.5" 4,230 LBS 1,990 LBS 2,750 LBS 1,1,270 LBS 9,535 FT LBS 51.2" NO 1 YR, 2 YRS ENGINE 1-6 MO/600 HOURS PARTS AND LABOR 7-12 MO/601-1,000 HRS PARTS ONLY $46,745.00
2.0 2.1 2.2 2.3 2.4 2.5 2.6 3.0 3.1 3.2 3.3 3.4 3.5 3.6 4.0 4.1 4.2 5.0 5.1 6.0 7.0 7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 7.9 7.10 7.11 7.12
7.13 7.14 7.15 7.16 7.17 7.18 7.19 7.20 7.21 7.22 7.23 7.24 7.25 7.26 7.27 7.28 7.29 7.30 7.31 7.32 7.33 7.34 7.35 7.36 7.37 7.38 7.39 7.40 8.0 9.0 10.0 10.1
10.2 11.0 12.0 13.0 14.0 14.1
OPERATOR ENVIRONMENT OPTIONS ROPS / FOPS Cab with heat and AC Deduct for 4 post ROPS/FOPS Canopy Suspension Seat K9946 3" Retractable Seat Belt K7942A Radio w/mp3 port and weather band V4218A Strobe EXCAVATOR EXTERIOR AND POWERTRAIN OPTIONS K7927 Travel alarm Block Heater K7479 Cab Mirror kit - 2 side, one rear 4 Way Hydraulic Angle Blade with float 6 Way Hydraulic Angle Blade with float K7940 Canopy work light (not for cab) UNDERCARRIAGE OPTIONS Rubber Tracks Steel Tracks HYDRAULICS OPTIONS SP2 4 way auxiliary hydraulics (for simultaneous operation of thumb with other hydraulic attachments like breakers, compactors, augers etc or to operate rotating grapples) BOOM AND ARM OPTIONS BUCKET/COUPLERS/TOOL OPTIONS Pin On Buckets K7792A 12" 2.6 cu. Ft 3 hole bucket K7793 16" 2.80 cu. Ft. 3 hole bucket K7794 18" 3.2 cu. Ft. 3 hole bucket K7796 24" 4.5 cu. Ft. 3 hole bucket K7797 30" 5.80 cu. Ft. 3 hole bucket K9836A 36" 4.17 cu. Ft. Drainage Bucket QUICK ATTACH BUCKETS K7870 Quick Coupler with 2 pins, 1 locking pin and hardware K7872 12" quick coupler bucket 2.13 cu. ft. K7873 16" quick coupler bucket 2.83 cu. Ft. K7874 18" quick coupler bucket 3.19 cu.ft. The K7874 18" QC bucket has 3 teeth. The K7902 thumb tines contact the end of the teethand do not mesh between the teeth K7875 24" quick coupler bucket 4.25 cu. Ft. K7876 30" quick coupler bucket 5.31 cu. Ft.
K7877A 36" drainage bucket 6.64 cu. Ft (not approved with thumb) predrilled for bolt on cutting edge K7474 K7474 bolt on cutting edge for 36" grading buckets K7473 39" Tilt Grading Bucket 4.72 cu ft tilts 45 degrees each way K7455 39 Bolt on cutting edge K7458 36" Grading blade K7908 BUCKET HANGERS Set of 2 ear blanks. Converts buckets and attachments to quick coupler style. Modification to match bucket or attachment contour required OTHER ATTACHMENTS K7910 HYDRAULIC THUMB KIT (K7870) quick coupler required) KXB510Q HYDRAULIC BREAKER,500 ft. lbs rated includes manual, side plates, hoses, hyd quick couplers, one moil point and one chisel point. Requires K7992 (QA) mount bracket and K7774hose kit K79392 BREAKER MOUNT BRACKET (req'd for KXB510Q breaker) K7774 HYD BREAKER HOSE KIT (req'd for KXB510Q breaker) K7773 ACCUMULATOR CHARGE KIT for breaker service WCB0518 COMPACTION WHEEL 19.5" DIAMETER 900 LBS WCBH118 COMPACTION WHEEL, 30" DIAMETER 1,100 LBS DC5000 16"X34" VIBRATORY PLATE COMPACTOR DC6000 18"X34" VIBRATORY PLATE COMPACTOR DC6500 24"X34" VIBRATORY PLATE COMPACTOR X1475 PLANETARY DRIVE AUGER HEAD 2 9/16" ROUND DRIVE (2" HEX AVAIL) STANDARD DUTY AUGER BIT 6" STANDARD DUTY AUGER BIT 9" STANDARD DUTY AUGER BIT 12" STANDARD DUTY AUGER BIT 15" STANDARD DUTY AUGER BIT 18" STANDARD DUTY AUGER BIT 24" STANDARD DUTY AUGER BIT 30" STANDARD DUTY AUGER BIT 36" AUGER BIT EXTENSION 24" AUGER BIT EXTENSION 48" K7461 24" Excavating Rake COMPLETE SET OF OEM AIR AND FLUID FILTERS INSTALLATION: HOURLY RATE FOR ATTACHMENT INSTALLATIONS, ETC.: (See Special Terms and Conditions) EXTENDED WARRANTY OPTIONS One year / 1,000 hour extension to base warranty
Two year / 2,000 hour extension to base warranty NEW EQUIPMENT RENTAL PROGRAM If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions. Hourly Rental Rate: Weekly Rental Rate: Monthly Rental Rate: Percent (%) of Rental Fee applied to purchase price: VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM See Solicitation Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES - (See Special Terms and Conditions) Price List Date and Number DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS DELIVERY STARTING POINT - City, State, Zip Price per loaded mile
std ($4,482) Std $127 $248 $276 $143 $175 $280 $2,427 $5,636 $135 STD $1,400 $1,418 $920 $975 $1,023 $1,138 $1,257 $988 $904 $864 $925 $990 $1,189 $1,367
$1,029 $145 $3,682 $159 $1,260 $326 $2,250 $9,494 $727 $567 $876 $2,787 $4,622 $5,272 $5,605 $5,998 $1,950 $254 $297 $335 $398 $430 $554 $734 $891 $282 $494 $1,978 $149 $98 $1,300
$2,200 $20/hr overages. $225 day 8hrs $900 40 hrs $2,000 176 hrs 85% 90 days, 75% after $20 hr % Discount NO FLAT RATE ALLOWED Anoka, MN 55303 $3.50 $150 minimum