565 (supersedes 5)-09-P Technical Data Specifications & Capacities SL Crawler Crane 50 Ton (6. metric ton) CAUTION: This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable crane lifting capacities and assembly and operating procedures.
565 (supersedes 5)-09-P
565 (supersedes 5)-09-P Table Of Contents Upper Structure............................................................................ Frame.................................................................................... Engine................................................................................... ydraulic System.......................................................................... Load oist Drums......................................................................... Optional Front-Mounted Third oist Drum................................................... Boom oist Drum.......................................................................... Boom oist System........................................................................ Swing System............................................................................. Counterweight............................................................................ Operator Cab............................................................................. Rated Capacity Limiter System.............................................................. Machinery Cab............................................................................ Catwalks................................................................................. Lower Structure............................................................................ Carbody.................................................................................. Side Frames.............................................................................. Travel and Steering........................................................................ Jack System.............................................................................. Attachment and Options.................................................................... Conventional Tube Boom................................................................... Tube Jib.................................................................................. Auxiliary Tip Extension...................................................................... Luffing Boom.............................................................................. Luffing Jib................................................................................ Dimensions................................................................................ Base Crane............................................................................... Side Frames.............................................................................. Upper Counterweights..................................................................... Lower Counterweights..................................................................... Boom/Luffing Boom........................................................................ Jib/Luffing Fixed Jib........................................................................ ook Balls................................................................................ ook Blocks.............................................................................. Assembly Diagram......................................................................... Working Weights........................................................................... Transport Weights.......................................................................... Transport Drawings........................................................................ Load oist Performance.................................................................... Working Areas............................................................................. Attachments............................................................................... Main Boom Make-up...................................................................... Main Boom Working Range Diagram........................................................ Main Boom Load Chart..................................................................... 4 4 4 4 5 7 7 8 8 9 0 4 4 5 6 9 0 4
565 (supersedes 5)-09-P Jib Attachment Make-up................................................................... Jib Attachment Working Range Diagram..................................................... Jib Attachment Load Charts................................................................. 6 7 8
565 (supersedes 5)-09-P Upper Structure ydraulic System Frame All welded steel frame with precision machined surfaces for mating parts. Turntable Bearing S Inner race with internal swing gear is bolted to lower frame. S Outer race is bolted to upper frame. Engine Engine Full pressure lubrication, oil filter, air cleaner, hour meter, throttle, and electric control shutdown. Mitsubishi 6M70-TL Number of cylinders 6 Bore and stroke 5. x 5.9 in (5 x 50mm) Piston displacement 786 in (.88L) Engine rpm at full load speed,000 rpm i-idle rpm,00 rpm Gross engine hp 65 hp (7kw) Peak torque,4 ft lb ( 50joule) @,0 rpm Electrical system 4 volt Fuel tank capacity 4 gal (508L) Batteries - volt Fuel Tank Equipped with fuel sight level gauges, flame arrester, and self-closing cap with locking eye for padlock. ydraulic Pumps The pump arrangement is designed to provide hydraulically powered functions allowing positive, precise control with in dependent or simultaneous operation of all crane functions. S Two variable displacement pumps operating at 4,55 psi (0kg/cm) and 74 gal/min (L/min) powers load hoist drums, boom hoist drum, optional third drum, self assembly cylinder, and travel. S One variable displacement pump operating at 4,6 psi (5kg/cm) and 4. gal/min (L/min) powers the swing motors, live mast flip, and counterweight removal. S One fixed displacement gear type pump operating at,987 psi (0kg/cm) and 5.8 gal/min (59.8L/min) powers the lower jacks, counterweight pinning, side frame pinning, and hoist brake cooling (optional). S One fixed displacement gear type pump operating at,47 psi (00kg/cm) and.7 gal/min (44L/min) powers the oil cooler fan. ydraulic Reservoir 9 gal (450L), equipped with sight level gauge. Diffusers built in for deaeriation. Filtration Ten micron, full flow, line filter in the control circuit. All oil is filtered prior to entering the reservoir. Counterbalance Valves All hoist motors are equipped with coun terbalance valves to provide positive load lowering and prevent accidental load drop if the hydraulic pressure is suddenly lost. Load oist Drums Each drum contains an axial piston, vari able speed hydraulic motor with individu al automatic winch motor brakes. S Power up/down operation modes S Optional wet-type free-fall brake sys tem S Automatic brake mode (spring applied, hydraulically released, wet type brake) S Drum lagging grooved for wire rope S Drum pawl controlled manually S Electronic drum rotation indicators S Mounted on anti-friction bearings S 4.57 in (0.6m) root diameter S 4.4 in (.05m) flange diameter S 5.0 in (0.90m) width The optional free-fall operation mode is designed to prevent load lowering even if the free-fall switch is accidentally acti vated. The automatic brake mode meets all OSA requirements for personnel han dling. Optional Front-Mounted Third oist Drum The hydraulic winch is mounted in the boom base section and is used in con junction with a fleeting sheave and three sheave assembly to run the wire rope over the boom top section. S Power up/down operation mode S Automatic brake mode (spring applied, hydraulically released) S Smooth drum S Electronic drum rotation indicator S Mounted on anti-friction bearings
565 (supersedes 5)-09-P Boom oist Drum Contains a pilot controlled, bi-directional, axial piston motor and a planetary gear re duction unit to provide positive control un der all load conditions. S Spring applied, hydraulically released, disc type brake controlled automatically S Drum pawl controlled automatically S Mounted on anti-friction bearings S 6.0 in (0.66m) root diameter S 8.58 in (0.98m) flange diameter S 0.7 in (0.6m) width Boom oist System Designed to lift off maximum boom or maximum boom plus jib and maximum luffing attachment unassisted. Operates up to a maximum boom angle of 8. Boom hoist limit system limits maximum boom angle operation. S -part reeving with in (mm) wire rope S Bridle assembly S 5 ft (7.6m) Live mast S ydraulic tubular boom backstops S Sheaves contain sealed anti-friction bearings S Boom speed from 0-70 is 69 sec onds with no load. Speed was deter mined using 00 ft (0.48m) of tube boom. Swing System Pilot controlled bi-directional axial piston motors and planetary gear reduction units to provide positive control under all load conditions. S Spring applied, hydraulically released, multi-plate brake S Free swing mode when lever is in neu tral position S Four position positive house lock S Two-speed swing S Audio/Visual swing alarm S Maximum swing speed is.7 rpm Counterweight Consists of an eleven-piece design that can be easily lowered to the ground using the removal cylinders. S ABCDE total upper counterweight is,000 lb (7 576kg) S Two carbody counterweights - 0,000 lb ( 8kg) each Total combined counterweight, ABC plus carbody counterweights is 0,000 lb (99 79kg). Operator Cab Fully enclosed modular steel compart ment is independently mounted and padded to protect against vibration and noise. S All tinted/tempered safety glass S Folding hinge entry door and sliding front glass window S 9,000 BTU hot water heater S 8,0 BTU air conditioner S Door and window locks S Circulating fan S Sun visor S Cloth seat S Defroster S Windshield wipers and washer S Dry chemical fire extinguisher S Engine instrumentation panel (voltmeter, engine oil pressure, engine water tem perature, fuel level, hydraulic oil tem perature, hour meter, and service moni tor system) S Electronic drum rotation indicators for front and rear hoist drums S Six way adjustable seat S and and foot throttle S Fully adjustable single axis controls S Swing lever with swing brake and horn located on handle S Bubble type level S Ergonomic gauge layout S Controls shut off lever S Control stand is adjustable for operator comfort. Rated Capacity Limiter System The SL rated capacity limiter system is a boom hoist load cell system. This system provides the operator with useful geometri cal data, to include: S Main Boom Length S Main Boom Angle S Jib Length S Jib Angle S Operating Mode S Load Radius S Boom Tip S Audible Alarm S Pre-Warning Light S Overload Light S Load On ook S Function kick-outs including over load S Operator settable stops (ramped stops) S Anti-Two Block Indicator S Boom hoist dead end load cell (no lineriders) Machinery Cab inged doors (three on right side, four on left side) for machinery access. Equipped with rooftop access ladder and skid resist ant finish on roof. Catwalks Standard on right and left sides. Catwalks are removable for reduced travel width.
565 (supersedes 5)-09-P Lower Structure Carbody Lower Frame All welded construction frame with preci sion machined surfaces for turntable bearing and rotating joint. S 9 ft 0 in (.00m) overall length S 4 ft 9 in (4.48m) overall width Side Frames Side Frames All welded, precision machined, hook and pinned, steel frames. S 9 ft in (5.87m) gauge S 7 ft 9 in (8.46m) overall length S 48 in (.m) wide track shoes S Sealed (oil filled) drive planetaries S Compact travel drives S Automatic hydraulic track adjustment system - optional Track Rollers S Eleven sealed (oil filled) track rollers per side frame S eat treated, mounted on oil filled antifriction bearings Tracks eat treated, self-cleaning, multiple hinged track shoes joined by one-piece full floating pins; 55 shoes per side frame Take Up Idlers Cast steel, heat treated, self-cleaning, mounted on aluminum/bronze bushings. Lubricated through idler shaft. S Track Tension Adjustment - Idler wheel adjusted by means of hydraulic cylinder and hand pump. Idler wheel shaft held in position with shims after adjustment is made. Travel and Steering Travel and Steering Each side frame contains a pilot con trolled, bi-directional, axial piston motor and a planetary gear reduction unit to pro vide positive control under all load condi tions. S Individual control provides smooth, precise maneuverability including full counter-rotation. S Spring applied, hydraulically released disc type brake controlled automatically S Maximum travel speed is 0.75 mph (.km/h). S Designed to 0% gradeability Jack System System contains four hydraulic cylinders individually pinned on swing out beams. S Individual controls are mounted on car body. S Minimum height of carbody when rest ing on pontoons is 7.4 in (0.44m). S Maximum height of carbody when rest ing on pontoons is 45 in (.4m). Attachment and Options Conventional Tube Boom -00 ft (8.9-9.44m) Basic Boom ft (8.9m) two-piece design that utilizes a 0 ft (9.4m) base section and a 0 ft (9.4m) open throat top section with in-line connecting pins on in (.0m) wide and 68 in (.7m) deep centers. S Boom foot on 5.7 in (.5m) centers S 4.5 in (0.cm) diameter chords S Lugs on base section for self assembly S Self assembly cylinder S Deflector roller on top section S Permanent skid pads mounted on top section to protect head machinery S Four,.5 in, (0.55m) root diameter polymide sheaves mounted on sealed anti-friction bearings S Tip extension and jib connecting lugs on top section S Mechanical boom angle indicator Tube Boom Extensions The following table provides the lengths available and the suggested quantity to obtain maximum boom in 0 ft (.05m) in crements. Midpoint pendant connections are required at ft (4.67m) for boom lengths of 50 ft (76.0m) and greater. S Polyamide wear blocks on top of each extension Tube Boom Extensions Quantity For Max Boom ft m 0.05 0 6.0 0 9.4.9 S Maximum tip height of 0 ft 6 in (9.5m) S Boom connecting pins storage on each extension
4 565 (supersedes 5)-09-P Tube Jib 0-90 ft (9.4-7.4m) Basic Tube Jib 0 ft (9.4m) two-piece design that uti lizes a 5 ft (4.57m) base section and a 5 ft (4.57m) top section with in-line connecting pins on 0 in (0.76m) wide and 6 in (0.9m) deep centers. S in (5.08cm) diameter chords S One 8.50 in (0.47m) root diameter steel sheave mounted on sealed antifriction bearings S 0 ft (6.0m) jib extensions provide jib lengths of 0 ft (9.4m), 50 ft (5.4m), 70 ft (.4m), and 90 ft (7.4m). S Jib offset angles at 5, 5, and 5 S The maximum tip height of boom + jib [70 ft + 90 ft (8.0 + 7.4m)] is 6 ft in (0.7m). Auxiliary Tip Extension Designed to use in place of jib to provide clearance between working hoist lines. The extension is equipped with two nylon 8 in (45.7cm) root diameter sheaves mounted on sealed anti-friction bear ings. Maximum capacity is 0 Ton (8.4mt). Luffing Boom 0-90 ft (.5-57.9m) S Common base and extensions as open throat boom S 5 ft (.5m) luffing extension required for bail anchor S Working angles of 88, 85,, 75, 70, and 65 S Working lengths of 0 ft (.5m) to 90 ft (57.9m) Luffing Boom Extensions The following table provides the lengths available and the suggested quantity to obtain the maximum luffing boom in 0 ft (.05m) increments. Midpoint pendants are not required. Luffing Boom Extensions Quantity For Max Boom ft m 0.05 0 6.0 0 9.4.9 S Rear hoist drum becomes luffing jib hoist S Optional third drum provides second working hoist line, if required. S Designed for self-assembly S Luffing jib hoist bridle and bail can re main reeved for crane transport S Job site mobility with attachment S Rolled out or rolled under erection methods S Compact transport module Luffing Jib 90-00 ft (7.4-.96m) Basic Luffing Jib 90 ft (7.4m) six-piece design utilizes a 5 ft (.5m) luffing boom top section, 0 ft (.05m) luffing jib base section, 0 ft (6.0m) luffing jib top section, and 0 ft (.05m), 0 ft (6.0m), and 0 ft (9.4m) jib extension with in-line connecting pins. S 49 Ton (44.45mt) maximum capacity S Working lengths of 90 ft (7.4m) to 00 ft (.96m) S Lugs on base section to attach fanpost transport links S Two polyamide in (0.5m) root dia meter luffing jib head sheaves S Two polyamide in (0.5m) root diameter luffing boom auxiliary head sheaves S Pin-on nose wheel S Ten-part luffing jib hoist reeving S.8 in (5mm) diameter pendants S Anemometer with in-cab display Luffing Jib Extensions The following table provides the lengths available and the suggested quantity to obtain the maximum luffing jib in 0 ft (.05m) increments. Midpoint pendants are not required. Extension Lengths ft (m) Number Required 0 (.05) 0 (.05) Midfall 0 (6.0) 0 (9.4) (.9) S Deflector roller on top of each extension S Appropriate length pendants S Maximum luffing jib tip height of ft (.06m)
5 565 (supersedes 5)-09-P Dimensions General Dimensions English Metric ft 8.9m Minimum Load Radius.8 ft.90m Maximum Boom Angle 8 8 Track Shoe 48 in.m Basic Boom 6' 7.5 (8.m) @ 8 Boom Angle 4' 4 (4.7m) ' 0.5 (.9m) 8' (.46m) 5'.5 (.56m) ' 0.75 (.98m) 9' 5 (5.9m) C L Of Rotation
6 565 (supersedes 5)-09-P 5' 5 (4.70m) 5' (4.65m) 9' 5 (5.9m) 48 (.m) 5'.5 (7.7m) ' (7.09m) 5' 5 (4.70m) 0' 6 (.0m) 57.5 (.45m) 6.75 (0.4m) 7.8 (0.45m) 9' (5.87m)
7 565 (supersedes 5)-09-P Base Crane Base Crane Ê 0 ft.5 in (.0m) * 45 in (.4m) Weight 87,05 lb (9 487kg) * Maximum height on pontoons * W Side Frames Side Frames Ë W Standard 48 (.m) Shoes Length 7 ft 9 in (8.46m) 48 in (.m) 57.5 in (.45m) Weight 4,490 lb (8 kg) Optional (.5m) Shoes Length 7 ft 9 in in 57.5 in Weight 4, lb (8.46m) (.5m) (.45m) (9 kg) L Number inside black circle Ê = # of components
8 565 (supersedes 5)-09-P Upper Counterweights A Base Counterweight Length Weight 6 ft.50 in 5 ft 5 in 7 ft.75 in 6,000 lb Ê (.89m) (4.70m) (.0m) (6 0kg) L A, B, C, D, & E, Wing Counterweights Length Length Weight: Left Side Right Side in 6 in 74.5 in 7 in.50 in (.5m) (.55m) (.89m) (.m) (0.m),0 lb,000 lb (5 6kg) (5 44kg) L Length Weight ft 5.75 in 4.5 in 5.5 in 0,000 lb L Î W Lower Counterweights Carbody Counterweights W W L Ë (.m) (.0m) (0.90m) ( 8kg) W Number inside black circle Ê = # of components
9 565 (supersedes 5)-09-P Boom/Luffing Boom 68 in (.7m) x in (.0m) Boom/Luffing Boom Extensions 86.6 (.0m) 0' 5.5 (.9m) 74.50 (.89m) 0 ft (.05m) Extension Weight :,70 lb (785kg) Weight includes pins and pendants. 86.6 (.0m) 0' 5.5 (6.4m) 74.50 (.89m) 0 ft (6.0m) Extension Weight :,05 lb ( 046kg) Weight includes pins and pendants. 86.6 (.0m) 0' 5.5 (9.8m) 0 ft (9.4m) Extension 74.50 (.89m) Weight :,6 lb ( 68kg) Weight includes pins and pendants. 86.6 (.0m) ' 5.5 (.m) ft (.9m) Extension 74.50 (.89m) Weight : 4,596 lb ( 085kg) Weight includes pins and pendants. L 0 ft (9.4m) Boom Top Section Length Deep Weight ft 0.5 in 84.5 in 68 in 75.5 in 5, lb W Ê (0.0m) (.4m) (.7m) (.9m) ( 65kg) D L 0 ft (9.4m) Boom Base Section Length Deep Weight 0 ft 9 in 86.75 in 68 in 76 in 5, lb Ê W (9.7m) (.0m) (.7m) (.9m) ( 7kg) D Number inside black circle Ê = # of components
0 565 (supersedes 5)-09-P W orsehead Extension* Length Weight 5.5 in 0 in.5 in, lb L Ê (.5m) (0.5m) (.04m) (54kg) Jib/Luffing Fixed Jib 5 ft (4.57m) Jib Top Section* L Ê W Length 6 ft 7 in (5.05m) 57.75 in (.46m).75 in (.04m) Weight 790 lb (58kg) Weight includes pendants and hardware. L 5 ft (4.57m) Jib Base & Strut Section* Ê W Length 8 ft.50 in (5.5m) 8 in (0.97m).50 in (0.8m) 66.50 in (.69m) Weight,70 lb (77kg) Weight includes pins, basic frontstay & backstay pendants, and hardware. Number inside black circle Ê = # of components * - Optional equipment
565 (supersedes 5)-09-P 0 ft (.05m) Jib Extension* W Ê L Length 0 ft in (.m) 8 in (0.97m) 4.50 in (0.88m) Weight 6 lb (65kg) Weights includes pins, pendants, and hardware. 0 ft (6.0m) Jib Extension* W Ê L Length 0 ft in (6.7m) 8 in (0.97m) 4.50 in (0.88m) Weight 59 lb (69kg) Weights includes pins, pendants, and hardware. Luffing Jib Extensions* Weights Include Pendants and ardware 0 ft (.05m) Extension W Length 0 ft 5.5 in (.9m) 65 in (.65m) 54 in (.7m) Weight 54 lb (45kg) Weights includes pins, pendants, and hardware. L 0 ft (6.0m) Extension W Length 0 ft 5.5 in (6.4m) 65 in (.65m) 54 in (.7m) Weight 96 lb (46kg) Weights includes pins, pendants, and hardware. L 0 ft (9.4m) Extension W Length 0 ft 5.5 in (9.8m) 65 in (.65m) 54 in (.7m) Weight 8 lb (67kg) Weights includes pins, pendants, and hardware. L ft (.9m) Extension W Length ft 5.5 in (.m) 65 in (.65m) 54 in (.7m) Weight 4 lb (88kg) Weights includes pins, pendants, and hardware. 0 ft (6.0m) Luffing Jib Top Section* L Ê L Length ft in (6.75m) 6 in (.m) 56.75 in (.44m) Weight,46 lb ( 096kg) Weight includes pendants and hardware. W Number inside black circle Ê = # of components * - Optional equipment
565 (supersedes 5)-09-P W ook Balls 0 Ton (8.mt) Swivel ook Ball* Weight.75 in 4.75 in,55 lb Ê (0.55m) (.06m) (569kg) W 0 Ton (8.mt) Non-Swivel Ê ook Ball* Weight.75 in 9 in, lb (0.55m) (0.99m) (549kg) ook Blocks Ton (6.mt) -Sheave ook Block* Weight 5.50 in 8.75 in 5 in.75 in,9 lb W W Ê (0.65m) (0.7m) (0.8m) (.54m) ( 0kg) W Number inside black circle Ê = # of components * - Optional equipment
565 (supersedes 5)-09-P 65 Ton (50mt) 5-Sheave ook Block* Weight in 8.75 in 8.5 in 8.50 in,9 lb W Ê W (0.56m) (0.7m) (0.7m) (.07m) ( 59kg) W W 00 Ton (8.4mt) 5-Sheave ook Block* Weight 5 in 8.75 in 5 in 58 in 4,00 lb W Ê (0.6m) (0.7m) (0.89m) (.47m) ( 950kg) W W 50 Ton (6.8mt) 6-Sheave ook Block* Weight 7 in 5.5 in 4.75 in 95.50 in 5,7 lb W Ê (0.69m) (0.90m) (0.88m) (.4m) ( 595kg) W Number inside black circle Ê = # of components * - Optional equipment
4 565 (supersedes 5)-09-P Assembly Diagram Link-Belt Working Weights Ctwt AB+A Ctwt ABC+A Ctwt ABCDE + A lb (kg) lb (kg) lb (kg) 5,5 (4 ),77 (54 9) 90,069 (76 9) psi 9.8 0.6. kg/cm 0.69 0.75 0.86 Based on basic crane including Mitsubishi 6M70-TL diesel engine, turntable bearing, live mast, part boom hoist reeving, backstops, counterweight, crawler lower with 48 in (.m) wide track shoes, sealed track rollers, and catwalks, plus the following: Lifting crane - includes ft (8.9m) basic boom, self assembly cylinder,,50 ft (4.48m) of type ZB main hoist rope, 975 ft (97.8m) of type ZB auxiliary hoist rope, 50 ton (6.8mt) hook block, and basic pendants. Ground Bearing Pressure
5 565 (supersedes 5)-09-P Transport Weights Item Description Gross Weight Transport Loads lb (kg) # Base crane 87,05 9 487 Add Side Frame w/ 48 (.m) Shoes - Two required 4,490 8 Add Base Ctwt 6,000 6 0 Add Ctwt Biscuit (Left) - Five required,0 Add Ctwt Biscuit (Right) - Five required #6 #7 #8 #9 5 6,000 5 44 Add Lower Ctwt - Two Required 0,000 8 Add 0 ft (9.4m) Base Section w/ Backstops & Boom Foot Pins 7,447 78 Add 0 ft (.05m) Extension w/ Pendants,70 785 Add 0 ft (6.0m) Extension w/ Pendants,05 046 Add 0 ft (9.4m) Extension w/ Pendants - Three required,6 68 Add ft (.9m) Extension w/ Pendants - Three required 4,596 085 Add 0 ft (9.4m) Top Section 5, 65 Add 5 ft (4.58m) Jib Base & Strut,70 77 Add 0 ft (6.0m) Jib Extension w/ Pendants & Pins - Three required 58 64 Add 5 ft (4.6m) Jib Peak Section 790 58 Add 50 Ton (6.mt) ook Block 5,7 595 Add 0 Ton (8.4mt) ook Ball w/o Swivel, 549 Approximate Total Shipping Weight # # #4 #5 #0 # # lb 87,05 4,490 4,490 6,6 4,596,47 6,945 4,96 4,77 9,074 4,776,6 kg 9 487 66 68 8 8 6 477 5 69 4 67 6 758 9 9 76 7 74
6 565 (supersedes 5)-09-P Transport Drawings ' (.4m) ' 6 (4.m) 7' 4 (.4m) 7' 4 (.4m) 0' (.m) LOAD # - 87,05 lb (9 487kg) Base crane 8' (.49m) LOAD # - 4,490 lb (8 kg) Side frame w/ 48 (.m) shoes 8' (.49m) LOAD # - 4,490 lb (8 kg) Side frame w/ 48 (.m) shoes ' (.68m) 6 (0.9m) LOAD #4-6,6 lb (6 477kg) Lower counterweight, ft (.9m) boom extension, and 0 ft (.05m) boom extension
7 565 (supersedes 5)-09-P ' (.6m) LOAD #5-4,596 lb (5 69kg) Lower counterweight and ft (.9m) boom extension ' 8 (.56m) LOAD #6 -,47 lb (4 67kg) 0 ft (9.4m) base section with backstops and boom foot pins, one,0 lb (5 6kg) counterweight, and one,000 lb (5 44kg) counterweight ' 9 (.58m) LOAD #7-6,945 lb (6 758kg) 0 ft (9.4m) top section, one,0 lb (5 6kg) counterweight, one,000 lb (5 44kg) counterweight, 0 ton (8.4mt) hook ball, and 50 ton (6.mt) hook block ' (.6m) LOAD #8-4,96 lb (9 kg) Two,0 lb (5 6kg) counterweights, one,000 lb (5 44kg) counterweight, and ft (.9m) boom extension
8 565 (supersedes 5)-09-P ' (.68m) ' 0 (0.9m) LOAD #9-4,77 lb (9 76kg) One,0 lb (5 6kg) counterweight, two,000 lb (5 44kg) counterweights, 0 ft (6.0m) boom extension, and 0 ft (9.4m) boom extension ' (.4m) LOAD #0-9,074 lb (7 74kg) 6,000 lb (6 0kg) base counterweight, 0 ft (6.0m) jib extension, 5 ft (4.57m) jib base and strut, and 5 ft (4.57m) jib peak 0' (.m) LOAD # - 4,776 lb ( 66kg) 0 ft (9.4m) boom extension and two 0 ft (6.0m) jib extensions 0' (.m) LOAD # -,6 lb ( 68kg) 0 ft (9.4m) boom extension
9 565 (supersedes 5)-09-P Load oist Performance Front & Rear Drums - 8mm Wire Rope Rope Layer Maximum Line Pull No Load Line Speed Full Load Line Speed Pitch Diameter Layer Total lb kg ft/min m/min ft/min m/min in mm ft m ft m 59,4 6 869 8.7 6.9 9.8 58.5 4.6 64.0 9.9 58.8 9.9 58.8 54,56 4 656 4.0 5.9 06.5 6.9 6.4 67.7 78.5 84.9 0.6. 50,0 7 44. 4.8. 67.4 8. 79..5 67.8 6. 89.9 4 46,669 69 47.6 4.7 5.8 7.9 0. 767.0 7. 7. 8. 6. 5 4,587 9 77 500.9 5.7 50.4 76.. 84.6 5.9 76.8,. 9.0 6,887 8 546 50. 6.6 65..8.9 86. 66.7 8.,78.8. 7 8,50 7 465 559.5 70.5 79.7 85. 5.8 90.0 8. 85.7,6. 506.0 Boom oist Drums - mm Wire Rope Rope Layer Maximum Line Pull No Load Line Speed Full Load Line Speed Pitch Diameter Layer Total lb kg ft/min m/min ft/min m/min in mm ft m ft m 0,657 47 09 99.9 0.4 54.8 6.7 6. 66.0 50. 45.8 50. 45.8 97,096 44 04 05.6. 57.9 7.7 7.6 70. 59.0 48.5 09. 94. 9,6 4 4..9 6. 8.6 9. 79. 67.7 5. 477.0 45.4 4 86,86 9 094 7. 5.7 64. 9.6 0.6 777.4 76. 5.7 65. 99. 5 8, 7 04.8 7.4 67.4 0.5. 85.6 85.0 56.4 88. 55.5 6 77,4 5 45 8.6 9. 70.5.5.6 85.7 9.6 59.0,0.8 4.5 7 7,755 455 4..9 7.7.5 5. 89.9 0. 6.6,4.0 76. Third oist Drum -.0 in (5.4mm) Wire Rope Rope Layer Maximum Line Pull No Load Line Speed Full Load Line Speed Pitch Diameter Layer Total lb kg ft/min m/min ft/min m/min in mm ft m ft m 9,090 95 7 8.6 0 70. 5.4 9.9 9.9 6,5 048 97 90.5 5 76.5 584. 4 4.6 74 8.5 4,4 086 98. 7 8. 5 65.0 56 47.5. 4,60 0 65 48 06. 95 89.9 7 685.8 68 5. 598 8. 5,070 9 557 74 4.0 7 96.6 9 76.6 8 55. 779 7.4 6 --- --- --- --- --- --- --- --- 9 58.8 97 96. Diameter Wire Rope Application Max. Permissible Load in mm Front oist -- 8 Rear oist -- Boom oist Third Drum Type Wire Rope Descriptions lb kg ZB,900 5 77 Non-Rotating, 4 x 7 Classification, EIPS, Right Regular or Right Lang Lay 8 ZB,900 5 77 Non-Rotating, 4 x 7 Classification, EIPS, Right Regular or Right Lang Lay -- LB 5,000 6 x 5 (6 x9 Class) - Filler Wire - Preformed - I.W.R.C - Right Lay - Regular Lay Compacted Strands.0 5.4 RB,7 0 4 8 x 9 Rotation Resistant Compacted Strand - igh Strength Preformed, Right Regular Lay
0 565 (supersedes 5)-09-P Working Areas Over Side Boom Over Drive End Over Idler End See Note Center Of Rotation Longitudinal Of Crawler See Note Idler Sprocket Drive Sprocket Over Side Note: These Lines Determine The Limiting Position Of Any Load For Operation Within Working Areas Indicated.
565 (supersedes 5)-09-P Attachments BL Jib Auxiliary orsehead Tip Extension ÏÏ ÏÏ JE Main Boom JE Main Boom JE Main Boom -00 ft (8.9-9.44m) Main Boom -70 ft (8.9-8.0m) Main Boom With Auxiliary orsehead Tip Extension -70 ft (8.9-8.0m) Main Boom With 0-90 ft (9.4-7.4m) Jib
565 (supersedes 5)-09-P Main Boom Make-up Boom Length ft (m) (8.9) 0 (.05) 70 (.4) Boom Extensions ft (m) (4.8) 90 (7.4) 0 (6.4) 0 (9.0) 00 (0.48) 0 (.5) 0 (6.58) 0 (9.6) (4.67) 50 (45.7) (48.77) 70 (5.8) (54.86) 90 (57.9) 00 (.96) 0 (64.0) 0 (67.06) 0 (70.0) (7.5) 50 (76.0) (79.5) 00 (9.44) 90 (88.9) 70 (8.0) (85.4) (.9) Notes:. Capacities shown are in kips/metric tons ( kip =,000 lb / metric ton = 0.45 kips) and are not more than 75% of the tipping loads with the crane standing level on firm supporting surface. A deduction must be made from these capacities for weight of hook block, hook ball, sling, grapple, load weighing device, etc. When using main hook while jib or tip extension is attached, reduce capacities by values shown in Crane Rating Manual. See Operator's Manual for all limitations when raising or lowering attachment.. The capacities in the shaded areas are based on structural strength. The capacities in the non-shaded areas are based on stability ratings.. For recommended reeving, parts of line, wire rope type, and wire rope inspection, see Wire Rope Capacity Chart, Operator's Manual, and Parts Manual. 4. Load ratings are based on freely suspended loads and make no allowances for such factors as the effect of the wind, ground conditions, and operating speeds. The operator shall therefore reduce load ratings in order to take these conditions into account. Refer to the Crane Rating Manual for Wind Speed Restrictions. 5. The 5 ft (7.6m) live mast must be used for all capacities listed. 6. The least stable rated condition is over the side. 7. Booms must be erected and lowered over the end for maximum stability. 8. Main boom length must not exceed 00 ft (9.44m). 9. Do not operate at radii and boom lengths where the Crane Rating Manual lists no capacity. Do not use longer booms or jibs than those listed in the Crane Rating Manual. Any of the above can cause a tipping condition, or boom and jib failure. 0. These capacities are in compliance with ASME/ANSI B0.5 at date of manufacture.. These capacities apply only to the crane as originally manufactured and normally equipped by Link Belt Construction Equipment Company.
565 (supersedes 5)-09-P Main Boom Working Range Diagram ' TO 00' MAIN BOOM 0 00 0 00 Maximum Boom Angle See Note 0 00 0 0 0 8 00 70 00 90 70 50 0 0 0 0 00 00 90 70 0 50 Main Boom Length In Feet Above Ground 50 0 0 Minimum Boom Angle See Note 0 0 0 00 00 90 70 0 0 0 00 0 00 Operating Radius From Centerline Of Rotation 0 00 0 CL Of Rotation Notes:.. Boom geometry shown is for unloaded condition and crane standing level on firm supporting surface. Boom deflection, subsequent radius, and boom angle change must be accounted for when applying load to hook. Maximum and minimum boom angles are equal to the values listed in the capacity chart for each boom length.
4 565 (supersedes 5)-09-P Main Boom Load Chart Main Boom Lift Capacity Chart - Rotation - ABCDE + A [,000 +,000 lb (7 575 + 7 6kg)] Counterweight [All capacities are listed in kips (mt)] Boom Length ft (m) Load Radius ft (m) (8.50) (.96) 500.0 (6.8) 5 (4.6) 4 (4.6) 49.4 (.9) 5 (4.6) 5 (4.6) 46.4 (09.) 5 (4.6) 6 (4.9) 44.8 (97.) 4.0 (96.4) 6 (4.9) 7 (5.4) 4. (86.5) 9.5 (85.7) 7 (5.4) 8 (5.55) 89.7 (76.8) 88. (76.) 8 (5.55) 9 (5.86) 70.4 (68.0) 69. (67.5) 67.5 (66.7) 9 (5.86) 0 (6.7) 5.9 (.) 5.8 (59.6) 50. (58.9) 0 (6.7) 5 (7.7) 85. (9.) 84. (9.0) 8. (8.5) 8.0 (7.9) 74. (4.4) 0 (9.5) 8.5 (08.) 7.5 (07.7) 4. (06.). (04.9) 8.8 (0.8) 6.6 (0.8).4 (8.8) 0 (9.5) 5 (0.79) 90.5 (86.4) 90.9 (86.6) 90.9 (86.6) 90.4 (86.4) 90. (86.) 88. (85.4).4 (8.8) 5 (0.79) (.4) 57.7 (7.5) 58. (7.7) 58.0 (7.7) 57.7 (7.5) 57. (7.4) 56.9 (7.) 56.4 (70.9) (.4) 50 (5.4) 6.5 (5.8) 6.9 (5.0) 6.7 (5.9) 6.4 (5.8) 6.0 (5.6) 5.5 (5.4) 4.9 (5.) 50 (5.4) (8.50) 9.6 (4.5) 9.0 (4.7) 9.9 (4.7) 9.6 (4.5) 9. (4.) 90.5 (4.) 89.9 (.8) (8.50) 75.4 (4.) 75. (4.) 74.9 (4.0) 74.4 (.7) 7.9 (.5) 7. (.) 70 (.59) (4.67) 6.4 (8.8) 6.0 (8.6) 6.5 (8.) 6.0 (8.) 6. (7.8) (4.67) 90 (7.76) 54.4 (4.7) 54. (4.5) 5.6 (4.) 5.0 (4.0) 5.4 (.8) 90 (7.76) 00 (0.84) 47. (.4) 46.6 (.) 46.0 (0.9) 45.4 (0.6) 00 (0.84) 0 (.9) 4.4 (8.8) 4.0 (8.6).4 (8.) 9.8 (8.) 0 (.9) 0 (7.0) 6.4 (6.5) 5.8 (6.) 5. (6.0) 0 (7.0) 0 (.09).5 (4.7).0 (4.5).4 (4.) 0 (.09) (4.8) 8.7 (.0) 8. (.7) (4.8) 50 (46.6) 5.9 (.7) 5. (.5) 50 (46.6) (49.4).9 (0.4) (49.4) 70 (5.4) 0.7 (9.4) 70 (5.4) 70 (.59) (4.67) 00 (0.84) 0 (7.0) (4.8) (49.4) (55.5) Load Radius ft (m) 5 (7.7) This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable crane lifting capacities and assembly and operating procedures.
5 565 (supersedes 5)-09-P Main Boom Lift Capacity Chart - Rotation - ABCDE + A [,000 +,000 lb (7 575 + 7 6kg)] Counterweight [All capacities are listed in kips (mt)] Boom Length ft (m) Load Radius ft (m) 00 (6.68) 5 (0.79) 4.8 (64.) (.4).6 (6.8) 5.8 (5.5) 96.5 (4.8) 50 (5.4) 4.4 (5.9).9 (5.) 90.5 (4.) 76.5 (4.7) 64.5 (9.) 54.9 (4.9) 50 (5.4) (8.50) 89. (.5) 88.7 (.) 84.8 (8.5) 7. (.).5 (7.4) 5. (.) (8.50) 70 (.59) 7.6 (.9) 7.0 (.7) 7. (.) 64. (9.) 54. (4.5) 4.8 (9.4) 70 (.59) (4.67).7 (7.5).0 (7.) 59. (6.9) 57.7 (6.) 48.6 (.0) 8.5 (7.5) (4.67) 90 (7.76) 5.7 (.5) 5.0 (.) 50. (.8) 49.6 (.5) 4.0 (8.6) 4.9 (5.8) 90 (7.76) 00 (0.84) 44.7 (0.) 44.0 (0.0) 4. (9.6) 4.6 (9.) 6.9 (6.7).4 (4.) 00 (0.84) 0 (.9) 9. (7.7) 8.4 (7.4) 7.7 (7.) 7.0 (6.8).7 (5.) 8.6 (.0) 0 (.9) 0 (7.0) 4.5 (5.6).8 (5.). (5.0).4 (4.7) 0. (.7) 5.8 (.7) 0 (7.0) 0 (.09) 0.7 (.9) 0.0 (.6) 9. (.) 8.5 (.9) 7.7 (.6).5 (0.7) 0 (.09) (4.8) 7.4 (.4) 6.7 (.) 6.0 (.8) 5. (.5) 4.5 (.). (9.6) (4.8) 50 (46.6) 4.7 (.) 4.0 (0.9). (0.5).5 (0.).7 (9.8) 9. (8.8) 50 (46.6) (49.4). (0.).5 (9.8) 0.8 (9.4) 0.0 (9.) 9. (8.8) 7.6 (8.0) (49.4) 70 (5.4) 0. (9.) 9.4 (8.8) 8.7 (8.5) 7.9 (8.) 7. (7.8) 6. (7.4) 70 (5.4) (55.5) 8. (8.) 7.5 (7.9) 6.8 (7.6) 6.0 (7.) 5. (6.9) 4.5 (6.6) (55.5) 90 (58.) 6.5 (7.5) 5.8 (7.) 5. (6.8) 4. (6.5).6 (6.).8 (5.8) 90 (58.) 00 (6.68) 4. (6.5).5 (6.).8 (5.8). (5.5). (5.) 00 (6.68) 0 (64.76).6 (5.7).8 (5.4).5 (5.) 0.7 (4.9) 0.0 (4.5) 0 (64.76) 0. (4.7) 0. (4.7) 9.5 (4.) 8.7 (.9) 0 (67.85) 0 (70.9) 9. (4.) 8.4 (.8) 7.6 (.4) 0 (70.9) (74.0) 8. (.7) 7.4 (.4) 6.6 (.0) (74.0) 50 (77.0) 6.4 (.9) 5.7 (.6) 50 (77.0) (.8) 5.5 (.5) 4.8 (.) (.8) 70 (8.7) 4.0 (.8) 70 (8.7) (86.5). (.5) (86.5) 0 (67.85) 0 (67.85) (74.0) (.8) (86.5) 00 (9.5) Load Radius ft (m) 5 (0.79) (.4) This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable crane lifting capacities and assembly and operating procedures.
6 565 (supersedes 5)-09-P Jib Attachment Make-up Jib Length ft (m) Jib Extensions Jib Extensions 0 ft (.05m) 0 ft (6.0m) 0 (9.5) (.9) 50 (5.4) (8.9) ÏÏ 70 (.4) (4.8) 90 (7.4) Notes:. Capacities shown are in kips/metric tons ( kip =,000 lb / metric ton = 0.45 kips) and are not more than 75% of the tipping loads with the crane standing level on a firm supporting surface.. A deduction must be made from these capacities for the weight of the main boom hook block or hook ball, jib hook block or hook ball, slings, grapples, load weighing devices, etc. When using main hook while jib is attached, reduce capacities by values shown in Crane Rating Manual. See Operator's Manual for all limitations when raising or lowering attachment.. The capacities in the shaded areas are based on structural strength. The capacities in the non-shaded areas are based on stability ratings. 4. Load ratings are based on freely suspended loads and make no allowances for such factors as the effect of the wind, ground conditions, and operating speeds. The operator shall therefore reduce load ratings in order to take these conditions into account. Refer to the Crane Rating Manual for Wind Speed Restrictions. 5. These capacities are for ABCDE+A counterweight. 6. These capacities are for working areas. 7. These capacities are for 0-90 ft (9.5-7.4m) jib lengths only. 8. The jib cannot be used on boom lengths over 70 ft (8.0m). 9. The least stable rated condition is over the side. 0. These capacities are in compliance with ASME/ANSI B0.5 at date of manufacture.. These capacities apply only to the crane as originally manufactured and normally equipped by Link Belt Construction Equipment Company.
7 565 (supersedes 5)-09-P Jib Attachment Working Range Diagram ' TO 70' MAIN BOOM WIT 0' TO 90' JIB Maximum Boom Angle See Note 0 00 0 00 0 00 0 0 5 70 5 0' ' 50' 70' ' 90' ' 5 50 0 0 0 0 00 00 90 50 Main Boom + Jib Length 8 70 50 0 0 0 0 00 00 90 0 70 Minimum Boom Angle See Note 50 0 0 Main Boom Length in feet above ground 0 0 0 00 00 90 70 0 0 Notes:.. 0 00 0 00 Operating Radius From Centerline Of Rotation 0 00 0 C L Of Rotation Boom geometry shown is for unloaded condition and crane standing level on firm supporting surface. Boom deflection, subsequent radius, and boom angle change must be accounted for when applying load to hook. Maximum and minimum boom angles are equal to the values listed in the capacity chart for each boom length.
8 565 (supersedes 5)-09-P Jib Attachment Load Charts 0 ft (9.5m) Offset Jib Length - _ Rotation - ABCDE + A [,000 +,000 lb (7 575 + 7 6kg)] Counterweight [All capacities are listed in kips (mt)] 5 Offset 5 Offset Main Boom Length ft (m) 5 Offset 0 (6.7) 76.8 (4.8) 0 (6.7) 5 (7.7) 74. (.7) 5 (7.7) 69.8 (.7) 5 (7.7) 0 (9.5) 7. (.7) 74.4 (.7) 0 (9.5) 68. (0.9) 0 (9.5). (7.) 5 (0.79) 70. (.8) 7.0 (.) 5 (0.79) 66.6 (0.) 68. (0.9) 5 (0.79) 55.5 (5.) (.4) 68. (.0) 7.7 (.5) 7.0 (.) (.4) 65. (9.6) 67. (0.4) (.4) 5. (.) 59.5 (7.0) 50 (5.4) 65. (9.6) 69.4 (.5) 69. (.4) 65. (9.5) 56.4 (5.6) 50 (5.4) 57.7 (6.) 65.4 (9.7) 64.9 (9.4) 50 (5.4) 44.4 (0.) 5.6 (4.) 58.9 (6.7) (8.50) 6.5 (7.9) 67. (0.5) 67.7 (0.7) 6.8 (8.9) 54.8 (4.9) (8.50) 49.7 (.5) 6.9 (9.0) 6.7 (8.9). (7.4) 5. (.7) (8.50).6 (8.4) 48.9 (.) 70 (.59) 5. (.7) 65.5 (9.7) 66. (0.0) 6.6 (8.4) 5. (4.) 70 (.59) 4.9 (9.9).5 (7.4) 6.6 (8.4) 59. (6.9) 50.6 (.0) 70 (.59) 9. (7.8) (4.67) 45.5 (0.6) 6.6 (8.4).5 (7.4) 58. (6.4) 5.7 (.5) (4.67).6 (8.4) 54.9 (4.9) 6. (7.7) 58.4 (6.5) 49. (.) 90 (7.76) 5.7 (4.4) 5.5 (.4) 49. (.) 48. (.9) 90 (7.76) 50. (.8) 5.0 (.6) 49.9 (.6) 00 (0.84) 46.8 (.) 44.6 (0.) 4. (9.) 4. (8.6) 00 (0.84) 46.6 (.) 45.0 (0.4) 0 (.9) 4. (8.7) 9. (7.8) 7. (6.8) 6.0 (6.) 0 (.9) 4. (8.7) 0 (7.0) 6.9 (6.7) 4.7 (5.7).5 (4.7). (4.) 0 (7.0) 0 (.09).0 (5.0) 0.9 (4.0) 8.6 (.0) 7.5 (.5) 0 (.09) (4.8) 9.8 (.5) 7.7 (.6) 5.4 (.5) 4. (.0) 50 (46.6) 4.9 (.).6 (0.) (49.4).5 (0.) 70 (5.4) (55.5) (74.0) 70 (8.7) (8.50) 0 (7.0) (55.5) (74.0) 70 (8.7) Load Radius ft (m) Main Boom Length ft (m) (8.50) 0 (7.0) Load Radius ft (m) Main Boom Length ft (m) Load Radius ft (m) (8.50) 0 (7.0) (55.5) (74.0) 70 (8.7) 54.6 (4.8) 57.8 (6.) 47.8 (.7) 45.0 (0.4) 50.9 (.) 55.0 (4.9) 46. (.0) (4.67) 4.9 (9.0) 47.8 (.7) 5.0 (.6) 44.9 (0.4) 47.6 (.6) 90 (7.76).5 (8.4) 45. (0.5) 49.4 (.4) 4.6 (9.8) 4.8 (9.4) 4.8 (9.0) 00 (0.84). (8.) 4.8 (9.4) 4.4 (9.7) 4.4 (9.) 9.6 (8.0) 7.6 (7.) 6.6 (6.6) 0 (.9) 8.5 (7.5).0 (8.) 8. (7.) 7. (6.8) 6.9 (6.7) 5.0 (5.9).9 (4.9).9 (4.5) 0 (7.0) 5. (6.0). (5.).4 (4.7).0 (5.0). (4.) 9.0 (.) 8.0 (.7) 0 (.09).4 (4.) 9.4 (.) 8.4 (.9) (4.8) 7.9 (.7) 5.7 (.7) 4.7 (.) (4.8) 8. (.7) 6.0 (.8) 5.0 (.).4 (9.7) 50 (46.6) 5.0 (.).9 (0.4).8 (9.9) 50 (46.6) 5. (.4). (0.5). (0.) 0. (9.) 9.0 (8.6) (49.4).6 (0.) 0.4 (9.) 9.4 (8.8) (49.4).8 (0.) 0.7 (9.4) 9.7 (8.9) 0.4 (9.) 7.8 (8.) 6.9 (7.7) 70 (5.4) 0.5 (9.) 8. (8.) 7. (7.8) 70 (5.4) 8.4 (8.) 7.5 (7.9) (55.5) 8.5 (8.4) 5.7 (7.) 5.0 (6.8) (55.5) 8.6 (8.4) 5.9 (7.) 5. (6.9) (55.5) 6. (7.) 5.5 (7.0) 90 (58.) 6.9 (7.7).8 (6.). (6.0) 90 (58.) 4.0 (6.4).6 (6.) 90 (58.) 4. (6.4).8 (6.) 00 (6.68). (5.5).8 (5.4) 00 (6.68). (5.5). (5.5) 00 (6.68).4 (5.6). (5.6) 0 (64.76) 0.6 (4.8) 0.5 (4.8) 0 (64.76) 0.7 (4.9) 0.7 (4.9) 0 (64.76) 0.9 (4.9) 0 (67.85) 9. (4.) 9. (4.) 0 (67.85) 9. (4.) 9.5 (4.) 0 (67.85) 9.6 (4.4) 0 (70.9) 7.9 (.6) 8. (.7) 0 (70.9) 7.9 (.6) 8.4 (.8) 0 (70.9) (74.0) 6.6 (.0) 7. (.) (74.0) 7. (.) (74.0) 50 (77.0) 5.5 (.5) 6. (.8) 50 (77.0) 6. (.8) 50 (77.0) (.8) 5. (.) (.8) (.8) 70 (8.7) 4. (.9) 70 (8.7) 70 (8.7) 0 (6.7) This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable crane lifting capacities and assembly and operating procedures.
9 565 (supersedes 5)-09-P ft (8.50m) Offset Jib Length - _ Rotation - ABCDE + A [,000 +,000 lb (7 575 + 7 6kg)] Counterweight [All capacities are listed in kips (mt)] 5 Offset 5 Offset Main Boom Length ft (m) 5 Offset (8.50) 0 (9.5) 8.7 (7.6) 0 (9.5) 0 (9.5) 5 (0.79) 7.5 (7.0) 5 (0.79) 5 (0.79) (.4) 6.4 (6.5) 7.7 (7.) 50 (5.4) 4.4 (5.6) 6. (6.5) 6. (6.5) (8.50).7 (4.8) 5.0 (5.9) 5.4 (6.) 4. (5.5) 70 (.59). (4.).8 (5.) 4.4 (5.6) (4.67) 9.9 (.6).7 (4.8) 90 (7.76) 7.4 (.4) 00 (0.84) 0 (.9) 0 (7.0) (55.5) (74.0) 70 (8.7) Load Radius ft (m) Main Boom Length ft (m) Load Radius ft (m) (8.50) 0 (7.0) (55.5) (74.0) (.4) 4. (5.6) 50 (5.4).7 (4.8).7 (5.). (5.0) (8.50). (4.).6 (4.8).7 (4.8).5 (5.).5 (4.7) 70 (.59) 9.4 (.).6 (4.).9 (4.5). (4.).6 (5.).8 (4.9).8 (4.4) (4.67) 6. (.8) 0.8 (4.0). (4.).7 (4.4).8 (4.9). (4.6). (4.) 90 (7.76).5 (0.7) 0.0 (.6) 4.4 (.) 0.8 (4.0).0 (4.5).6 (4.) 0.7 (.9) 00 (0.84).4 (9.7). (0.0) 9.9 (.6). (4.).0 (4.) 0. (.7) 0 (.9) 9.8 (9.0) 0 (7.0) 9. (.) 0.6 (.9) 0.4 (.8) 9.6 (.4) 0 (.09) 7. (.4) 0.0 (.6) 9. (.) (4.8) 5. (.5) 8. (.8) 50 (46.6).6 (0.7) (49.4) 70 (5.4) 70 (8.7) Load Radius ft (m) Main Boom Length ft (m) (8.50) 0 (7.0) (55.5) (74.0) 70 (8.7) (.4) 50 (5.4) 0.0 (.6) (8.50) 6.5 (.0) 0.0 (.6) 0. (.7) 70 (.59).7 (0.8) 7.7 (.6) 9.9 (.6) 0.5 (.8) 9.7 (.5) (4.67).4 (9.7) 5.6 (.6) 8. (.8) 8.7 (.0) 6.7 (.) 0.6 (.9) 0.0 (.6) 9. (.) 90 (7.76) 9.6 (8.9).8 (0.8) 6.6 (.) 8. (.8) 6. (.9) 8. (.8) 0.0 (.6) 9.5 (.4) 8.7 (.0) 00 (0.84) 8. (8.). (0.) 5. (.4) 7. (.) 5.9 (.7) 6. (.8) 9.4 (.) 9.0 (.) 8. (.8) 0 (.9) 0.9 (9.5).7 (0.8) 5.9 (.7) 5.5 (.6) 0 (7.0) 4.4 (.) 8.9 (.) 8.6 (.0) 7.8 (.6) 0 (7.0) 9.8 (9.0).6 (0.) 4.7 (.) 5. (.4) 8. (.8) 0 (.09).9 (0.4) 7.6 (.5) 8. (.7) 7.4 (.4) 0 (.09) 8.8 (8.5).5 (9.8).7 (0.8) 4.6 (.) 6.0 (.8) 4.9 (.) (4.8).6 (9.8) 6. (.8) 6.8 (.) 5.8 (.7) (4.8) 8.0 (8.) 0.6 (9.).7 (0.).6 (0.7) 5.5 (.6). (0.5). (0.0) 50 (46.6) 0.4 (9.) 4.8 (.).9 (0.8).9 (0.4) 50 (46.6) 9.8 (9.0).9 (9.9).8 (0.). (0.0). (0.5) 0.8 (9.4) 9.6 (8.9) (49.4) 9.5 (8.8).5 (0.7).4 (9.7) 0.4 (9.) (49.4) 9. (8.7). (9.6).0 (9.5) 0.9 (9.5).0 (9.5) 8.6 (8.4) 7.5 (7.9) 70 (5.4). (9.7) 9. (8.7) 8. (8.) 70 (5.4) 8.5 (8.4) 9.7 (8.9) 8.8 (8.5) (55.5) 9. (8.7) 6.4 (7.4) 5.6 (7.) (55.5) 9.4 (8.8) 7.0 (7.7) 6. (7.) (55.5) 7.9 (8.) 7.6 (8.0) 6.8 (7.6) 90 (58.) 7.5 (7.9) 4.6 (6.6).9 (6.) 90 (58.) 7.7 (8.0) 5. (6.8) 4.5 (6.6) 90 (58.) 5.6 (7.) 5.0 (6.8) 00 (6.68) 6.0 (7.).9 (5.9).4 (5.6) 00 (6.68) 6. (7.). (6.0).9 (5.9) 00 (6.68).8 (6.).4 (6.) 0 (64.76) 4.6 (6.6). (5.). (5.0) 0 (64.76) 4.8 (6.7).8 (5.4).6 (5.) 0 (64.76). (5.5).0 (5.4) 0 (67.85). (5.9) 9.9 (4.5) 9.7 (4.4) 0 (67.85) 0. (4.7) 0. (4.6) 0 (67.85) 0.7 (4.9) 0.6 (4.8) 0 (70.9) 8.7 (.9) 8.5 (.9) 0 (70.9) 9.0 (4.) 8.9 (4.0) 0 (70.9) 9. (4.) 9. (4.) (74.0) 7.5 (.4) 7.4 (.4) (74.0) 7.8 (.5) 7.7 (.5) (74.0) 8. (.7) 50 (77.0) 6.4 (.9) 6. (.9) 50 (77.0) 6.6 (.0) 6.7 (.0) 50 (77.0) 6.9 (.) (.8) 5.4 (.4) 5.4 (.4) (.8) 5.7 (.6) (.8) 70 (8.7) 4.5 (.0) 4.5 (.0) 70 (8.7) 4.8 (.) 70 (8.7) (86.5).6 (.6).7 (.7) (86.5).9 (.8) (86.5) 90 (89.44).9 (.) 90 (89.44) 90 (89.44) 00 (9.5). (.0) 00 (9.5) 00 (9.5) This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable crane lifting capacities and assembly and operating procedures.
0 565 (supersedes 5)-09-P 90 ft (7.76m) Offset Jib Length - _ Rotation - ABCDE + A [,000 +,000 lb (7 575 + 7 6kg)] Counterweight [All capacities are listed in kips (mt)] 5 Offset 5 Offset Main Boom Length ft (m) 5 Offset (8.50) 5 (0.79).8 (0.8) 5 (0.79) 5 (0.79) (.4).6 (0.7) (.4) (.4) 50 (5.4).4 (0.).9 (0.4) (8.50). (9.7). (0.).0 (0.0).0 (9.5) 70 (.59) 0. (9.).5 (9.8).8 (9.9) 0.8 (9.4) (4.67) 9. (8.8) 0.8 (9.4). (9.7) 90 (7.76) 8. (8.) 0. (9.) 00 (0.84) 7. (7.8) 0 (.9) 0 (7.0) (55.5) (74.0) 70 (8.7) Load Radius ft (m) Main Boom Length ft (m) Load Radius ft (m) (8.50) 0 (7.0) (55.5) (74.0) 50 (5.4). (9.6) (8.50) 0. (9.) 0.7 (9.4) 0. (9.) 70 (.59) 9. (8.8) 0.0 (9.) 0. (9.) 0.6 (9.) 9.9 (9.0) (4.67) 8. (8.) 9.4 (8.8) 9.6 (8.9) 9.4 (8.8) 0.7 (9.4) 0.4 (9.) 9.8 (9.0) 90 (7.76) 7. (7.8) 8.8 (8.5) 9. (8.7) 9.4 (8.8) 0. (9.) 0. (9.) 9.6 (8.9) 00 (0.84) 6.0 (7.) 8. (8.) 6. (7.) 8.8 (8.5) 9.7 (8.9) 9.8 (9.0) 9.4 (8.8) 0 (.9) 4.6 (6.6) 0 (7.0) 5. (6.9) 8. (8.) 9. (8.7) 9. (8.8) 9. (8.7) 0 (7.0) 0 (.09) 4.0 (6.4) 7. (7.8) 8.7 (8.5) 9.0 (8.6) 8.8 (8.5) (4.8).0 (5.9) 6.7 (7.6) 8. (8.) 8.6 (8.4) 50 (46.6) 6.0 (7.) 7.8 (8.) (49.4) 5.4 (7.0) 70 (5.4) 70 (8.7) Load Radius ft (m) Main Boom Length ft (m) (8.50) 0 (7.0) (55.5) (74.0) 70 (8.7) 50 (5.4) (8.50) 70 (.59) 7.8 (8.) 9. (8.7) (4.67) 6.0 (7.) 8.0 (8.) 7.8 (8.) 9.0 (8.6) 8.7 (8.5) 90 (7.76) 4.5 (6.6) 6.6 (7.5) 7.7 (8.0) 6.6 (7.5) 8.7 (8.5) 8.6 (8.4) 8. (8.) 00 (0.84). (6.0) 5.5 (7.0) 6.9 (7.7) 6.0 (7.) 4.9 (6.8) 7.4 (7.9) 8. (8.) 8. (8.) 8.0 (8.) 0 (.9). (5.6) 4.5 (6.6) 6.0 (7.) 5.9 (7.) 4.8 (6.7).4 (6.) 6.7 (7.6) 7.8 (8.) 7.9 (8.) 7.7 (8.0) 0 (7.0).4 (5.).6 (6.) 5. (6.8) 5.8 (7.) 4.7 (6.7) 0 (.09).5 (5.7) 5.9 (7.) 7. (7.8) 7.6 (8.0) 7.4 (7.9) 0 (.09) 0.7 (4.9).8 (5.8) 4.4 (6.5) 5.5 (7.0) 4.6 (6.6) 8.4 (8.) (4.8).7 (5.) 4.9 (6.8) 6.8 (7.6) 7. (7.8) 7. (7.8) (4.8). (5.5).7 (6.) 4.8 (6.7) 4.5 (6.6) 8. (8.) 8. (8.) 50 (46.6) 4. (6.4) 6. (7.4) 6.9 (7.7) 6.8 (7.6) 50 (46.6).6 (5.). (5.9) 4. (6.4) 4.4 (6.5) 7. (7.8) 7.9 (8.) 7.8 (8.) (49.4). (6.0) 5.8 (7.) 6.5 (7.5) 6.5 (7.5) (49.4). (5.0).5 (5.7).7 (6.) 4. (6.4) 4.6 (6.6) 6.7 (7.6) 7.6 (8.0) 7.5 (7.9) 70 (5.4).6 (5.7) 5.0 (6.8) 6. (7.) 6. (7.) 70 (5.4) 0.6 (4.8).0 (5.4). (6.0).7 (6.) (55.5).8 (6.) 6. (7.) 6.9 (7.7) 6. (7.) (55.5). (5.5) 4. (6.5) 5.8 (7.) 5.9 (7.) (55.5).6 (5.).7 (5.8). (6.0) 90 (58.).0 (5.9) 5.8 (7.) 5.0 (6.8) 4.4 (6.5) 90 (58.).7 (6.) 5. (6.8) 5. (6.9) 90 (58.). (5.). (5.6).8 (5.8) 00 (6.68) 5. (6.9). (6.0).8 (5.8) 00 (6.68). (6.0) 4. (6.4).6 (6.) 00 (6.68) 0.9 (4.9).9 (5.4).4 (5.6) 0 (64.76) 4.9 (6.8).8 (5.4).4 (5.) 0 (64.76).7 (5.8).5 (5.7). (5.5) 0 (64.76) 0.6 (4.8).6 (5.).0 (5.4) 0 (67.85).8 (6.) 0.4 (4.7) 0.0 (4.5) 0 (67.85). (5.5). (5.0) 0.8 (4.9) 0 (67.85). (5.).5 (5.) 0 (70.9).5 (5.7) 9. (4.) 8.8 (4.0) 0 (70.9).8 (5.4) 9.8 (4.4) 9.5 (4.) 0 (70.9) 0.4 (4.7) 0. (4.6) (74.0). (5.) 8.0 (.6) 7.6 (.4) (74.0) 8.6 (.9) 8. (.8) (74.0) 9. (4.) 8.9 (4.0) 50 (77.0) 0. (4.6) 6.9 (.) 6.5 (.9) 50 (77.0) 7.4 (.4) 7. (.) 50 (77.0) 7.9 (.6) 7.7 (.5) (.8) 5.9 (.7) 5.6 (.5) (.8) 6.4 (.9) 6. (.8) (.8) 6.8 (.) 6.6 (.0) 70 (8.7) 5.0 (.) 4.7 (.) 70 (8.7) 5.4 (.4) 5. (.4) 70 (8.7) 5.6 (.5) (86.5) 4. (.9).9 (.8) (86.5) 4.5 (.0) 4. (.0) (86.5) 4.7 (.) 90 (89.44).4 (.5). (.4) 90 (89.44).5 (.6) 90 (89.44) 00 (9.5).6 (.).4 (.) 00 (9.5).8 (.) 00 (9.5) This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual and Operator's Manual to determine allowable crane lifting capacities and assembly and operating procedures.
565 (supersedes 5)-09-P This Page Intentionally Blank
5 (supersedes 5487)-09-P Link Belt Construction Equipment Company Lexington, Kentucky www.linkbelt.com Link Belt is a registered trademark. Copyright 0. We are constantly improving our products and therefore reserve the right to change designs and specifications. Powered by TCPDF (www.tcpdf.org)