STEP BY STEP INSTALLATION INSTRUCTIONS Solar & Roller Shades Motivia Motorization Remote Control
Everything You Need Table of Contents Step 1 - Getting Started....3 Overview - Motorization with No Headrail...4 Step 2 - Mounting the Brackets...5 Step 3 - Hanging the Shade...6 A Smooth Set-Up We want you to love your new window coverings and that includes having a smooth installation experience. If you encounter any difficulties or questions, please reach out to us for help. It s why we re here. Call us at 800.248.8888 or visit www.smithandnoble.com/knowhow for more info on installation. We recommend you hold on to all packaging until your window coverings are fully installed. Should something go wrong (we strongly doubt it), we want any potential returns to be as painless as possible. Customer Service Hours Monday Friday: 6am 7pm PT Saturday Sunday: 7am 4pm PT Overview - Motorization with Cassette/2 on 1 Headrail....7 Step 2 - Mounting the Brackets... 8-9 Step 3 - Hanging the Shade... 10 Overview - Motorization with Metal Valance... 11 Step 2 - Mounting the Brackets... 12 Step 3 - Hanging the Shade... 13 Step 4 - Attaching the Valance.... 14 Linking the Remote.... 15 Operating the Remote Controls.... 16 Optional Hold down brackets.... 17 Skew Adjustment.... 17 Recharging the Shade... 17 Care & Cleaning Instructions... 18 Safety... 18 Troubleshooting... 18 Warranty...Back Cover smithandnoble.com 1 smithandnoble.com 800.248.8888 2
Step 1 Parts & Tools Overview Getting Started First, make sure you have all the parts and tools required to install your shades. Motorization with No Headrail - Remote Control Bracket ALL THE HARDWARE YOU LL NEED: Pencil, screw-driver, ¼ nut driver, level, and a drill with a 1 16 drill bit. Bracket Roller Shade Then find wooden studs where you ll want to attach the brackets; if you need to mount your shades to wallboard or plaster, use a secure fastener designed for hollow wall applications. For metal surfaces, pre-drill holes and use the included screws. For concrete, stone, brick, or tile surfaces, use a masonry drill and appropriate plugs, anchors, or screws. It s important when selecting a fastener to make sure it s designed to support the weight of the shade. Follow the fastener manufacturer s instruction from there on out. SCREWS CASSETTE MOUNTING BRACKET EXTENSION & SIDE BRACKET (OPTIONAL) BRACKETS FOR DUAL ROLLER SHADES BRACKET FOR SHADES WITHOUT HEADRAIL NO HEADRAIL BRACKET COVERS OUTSIDE MOUNT (OPTIONAL FOR INSIDE MT) METAL VALANCE CLIP SPACER BLOCK (OPTIONAL) Bottom Bar 1 2 3 4 5 BRACKETS FOR SHADES WITH METAL VALANCE METAL VALANCE BRACKET COVER (OUTSIDE MOUNT ONLY) HOLD DOWN BRACKET (OPTIONAL) REMOTE CONTROL CHARGER PENCIL & SCREWDRIVER (NOT INCLUDED) POWER DRILL & LEVEL (NOT INCLUDED) 3 smithandnoble.com 800.248.8888 4
Step 2 Mounting Brackets Step 3 Hanging the Shade Inside Mount Hanging Shades without Headrail The installation brackets are always mounted so that the short legs face in. Brackets must be in line and level. Shim brackets on inside mounts if necessary. The roller must be level for the shade to operate properly. Attach each bracket using two screws either up through the top (A) or through the side (B). Inside Mount No Headrail with Bracket Covers Place the brackets 1/16" from the window casing. This will create a gap for the bracket cover. Attach each bracket using two through the top holes. Do not use side holes. Outside Mount The installation brackets are always mounted so that the short legs face in. Brackets must be in line and level. The roller must be level for the shade to operate properly. 1/16" Gap No Headrail A No Headrail B Dual Roller No Headrail with Bracket Cover A Dual Roller B No Headrail Once the brackets are secured and level, the fabric roll can be inserted. Make sure your hands are clean to avoid soiling the shade. Be sure the motor and roller end plug are inserted into the roller. Hold the shade with the bottom of the motor facing the floor. Be sure the shade is fully rolled on the tube. Insert the spring loaded pin end into the round hole of the bracket. Push the motor end toward the pin end to compress the spring. The pin should compress half way in for best fit. Line up the hooks on the motor with the two slots in the bracket. Allow the spring to release and let the hooks go into the slots. Once the two hooks are through the slots, gently pull down on the motor until the hooks lock securely to the bracket. Bracket Cover Bracket covers come standard for outside mount shades and if requested for non-flush inside mounted shades. If your shade came with bracket covers, slide the bracket covers over the bracket until they snap into place. First, hold the shade above the window so that it's perfectly centered over the window opening at the desired height. Mark the position of the brackets on the wall. Mount the brackets to the wall. Make sure the mounting brackets are level. No Headrail Room Side Dual Roller Shades Install shades into the dual roller brackets in the same manner as above. Make sure that the fabric on the lower shade rolls off the back of the roller (standard roll) and that the fabric on the upper front shade rolls off the front of the roller (reverse roll). 5 smithandnoble.com 800.248.8888 6
Overview Step 2 Mounting Brackets Motorization with Cassette - 2 on 1 Headrails, Remote Control Decorative Cassette 2" Inside Mount Center the shade in the window frame. Mark the position of the brackets. End brackets should be located 2" in from each end. Mount the brackets to the top of the window frame. Make sure the brackets are aligned. Space additional brackets evenly between two end brackets. 1 2 3 4 5 Bottom Bar Remote Control Side Mount (optional) Measure from window sill up to desired mounting position. Mount Side Mount Brackets on each side of window frame as shown. Make sure to confirm that headrail will sit perfectly level. Once Side Mount Brackets are installed and properly positioned, attach the Standard Mounting Brackets using the nuts and bolts provided. 2 on 1 Headrail with Remote Control 7 smithandnoble.com 800.248.8888 8
Step 2 Mounting Brackets Step 3 Hanging the Shade Outside Mount First, hold the shade above the window so that it s perfectly centered over the window opening at the desired height. Mark the position of the bracket on the wall. End brackets should be located 2" from each end. Mount the brackets to the wall. Make sure the mounting brackets are level. If needed, space additional brackets evenly between two end brackets. 2" Mounting Brackets Headrail Hanging the Shade Insert the rail into the opening of the bracket. Push the rail back until it is fully engaged. Extension Brackets (optional) Optional Extension Brackets are used to project the back of the shade up to 2 1 2" from the mounting surface. Attach the Standard Mounting Bracket to the Extension Bracket with the nut and bolt provided. Extension Bracket Spacer Blocks (Optional) Each spacer block projects brackets 3/8" away from mounting surface. Position spacer block behind mounting bracket, make sure the brackets are level and aligned. Attach each bracket using two screws. Screws should be long enough to secure the bracket to the mounting surface. Removing the Shade To remove the shade, partially lower the shade and insert a flat head screwdriver as shown. Twist the screwdriver until the headrail disengages from the bracket. 9 smithandnoble.com 800.248.8888 10
Overview Step 2 Mounting Brackets Motorized with Metal Valance - Remote Control Metal Valance Inside Mount The installation brackets are always mounted so that the rounded edge faces down. Brackets must be in line and level. Shim brackets on inside mounts if necessary. The roller must be level for the shade to operate properly. B Attach each bracket using two screws either up through the top (A) or through the side (B). A Inside Mount Outside Mount The installation brackets are always mounted so that the rounded edge faces down. Brackets must be in line and level. The roller must be level for the shade to operate properly. Bottom Bar 1 2 3 4 5 Outside Mount The brackets can be mounted to wall or window frame. Make sure the mounting brackets are level. The brackets are always mounted so that the inner surfaces face each other. Brackets are mounted with the open end down. REMOTE CONTROL 11 smithandnoble.com 800.248.8888 12
Step 3 Hanging the Shade Step 4 Attaching the Valance Hanging the Shade Attaching the Valance Once the brackets are secured and Insert a valance clip into the bottom level, the fabric roll can be inserted. front keyhole slot of each bracket. Make sure your hands are clean to avoid soiling the fabric. Press the bottom firmly to lock into place. Be sure the motor and roller end plug are inserted into the roller. Hold the shde with the bottom of the motor facing the floor. Be sure the shade is fully rolled on the tube. Hold the valance on the top of the bracket first, and rotate downward. Press until the bottom hook feature on the valance engages and is locked to the valance clip. Press Pull "L" portion of valance Locked Insert the spring loaded pin end into the round hole of the bracket. Push the motor end toward the pin end to compress the spring. The pin should compress half way in for best Bracket Covers - Outside Mount Only Press the covers onto the brackets as shown. fit. Line up the hooks on the motor with the two slots in the bracket. Allow the spring to release and let the hooks go into the slots. Once the two hooks are through the slots, gently pull down on the motor until the hooks lock securely to the bracket. 13 smithandnoble.com 800.248.8888 14
Link the Remote Control Operating the Remote Control Link the Remote Control For added protection, your remote control arrived with a protective film on the top. Please remove this film prior to use. The remote control has multiple channels. Before linking the remote, determine which shade(s) you want on which channel. The standard remote has 5 channels. All shades linked to the remote will also automatically be programmed to the "ALL" channel. Shade Motor Charging Port Setting (Red Button) 1 2 3 4 5 Channel Display Up Stop Down Channel + Channel Remote Control Select the desired channel with the CHANNEL key. The channel indicator light will illuminate the channel that is on. If all 5 lights are lit, the remote will control all 5 channels at once. Tapping the UP or DOWN keys for less than 2 seconds will move the shade in short steps. Holding the UP or DOWN keys down for more than 2 seconds before releasing, will operate the shade in the faster standard speed. 1. Press the SETTING button on the motor until the shade jogs twice. Release the button immediately after the first jog this should not be more than 3 seconds. 2. Select the channel that you want to program using the CHANNEL selector button. 3. Press and hold the CONFIRM btuuon until the shade(s) jogs once. The shade is now linked to the remote. 4. Repeat steps 1-3 to program the rest of the shades. Front of Remote C L Limit Button Confirm Button Press the UP or DOWN keys to raise or lower the shade. Press the STOP key to stop the shade anywhere along the window. Setting and Using a Favorite Position: Use the UP or DOWN buttons to position the shade at the desired favorite position. First press and hold the LIMIT button on the back of the remote with a small screwdriver or tip of a pen. While holding the LIMIT button press and hold the UP button. Release both buttons when the shade jogs. Back of Remote With the shade at either the upper or lower limit, simply press the STOP button to bring the shade to the favorite position. To go to the favorite position from any other location, make sure the shade has been stopped for at least three seconds before pressing the STOP button. Refer to the Motorization Guide for additional details. 15 smithandnoble.com 800.248.8888 16
Optional Hold Down Bracket Hold Down Bracket Optional Hold Down Brackets are mounted with the supplied screws. With the shade at its proper drop, place the pin of each Hold Down into the hole in each End Cap and make sure the pins are level and aligned. Raise the shade, then screw the Hold Down Bracket into the mounting surface. Skew Adjustment If the shade does not raise evenly, first make sure the mounting brackets are mounted level with each other. If the shade is level and it still skews, use the Skew Adjustment Kit included with your shade to adjust skewing. If these suggestions don t work, then please give us a call or visit our website. Care & Cleaning Care & Cleaning /Safety Occasional light vacuuming with a soft bristle attachment or gentle feather dusting is all that is required to keep your shades looking fresh and neat. Safety First. Style Second To None. Great style should never come at the cost of safety. Every Smith & Noble window treatment conforms strictly to today s safety standards, including permanent tie-down devices and built-in cord stops. To protect young children and pets, there s no better way to eliminate risk than to use one of our cordless products. Child Safety Troubleshooting Recharging the Shade PROBLEM SOLUTION When the shade begins to operate The shade does not work or runs slowly. Recharge the motor. slower than normal it is time to charge Charging Port Setting (Red Button) the battery. Plug the 8.4v charger into the port on the motor. Plug the charger into an electrical outlet. A red light on the charger indicates that the battery is charging. To fully charge the batteries, allow the batteries to charge for at least 1 hour after the light on the charger turns green. A typical charge cycle can take between 4-6 hours. The shade only goes in one direction (up or down). Shade goes up when the down button is pushed and goes down when the up button is pushed. The indicator light on the remote does not shine or the remote range becomes shorter. The motor beeps when operated. The limit setting was unsuccessful and needs to be reset. Refer to the Motorization Guide. Press the Limit button on the underside of the remote and Stop button at the same time. Hold until the shade jogs once. The shade should now move in the correct direction. Replace the battery in the remote (CR2430 Lithium). Recharge the motor. Insert Charger If these suggestions don t work, then please give us a call or visit our website. 17 smithandnoble.com 800.248.8888 18
Warranty Service The enjoyment of your window coverings should be everlasting, which is why our products come with a limited lifetime warranty. The warranty applies to the original owner, requires a proof of purchase and covers defects in material or craftsmanship. Shades or blinds must have been properly installed. We reserve the right to determine if your window covering warrants a repair or a replacement. In need of warranty service? Call us at 800.248.8888 and we ll arrange for a repair or replacement ASAP. 2017 Smith & Noble Home, Inc. All Rights Reserved SN2056 SN_RS_M_R_2017_2