coslide Linear Sliding arriages and earings 1 Section osch coslide Linear Sliding arriages and earings The new osch coslides, along with the new slider bearings and the profile slider, provide an inexpensive way to create precise linear motion. Ideal for applications such as sliding doors and manual guides, osch linear sliding elements and bearings provide durability and ease of use, without high cost. 6mm & 8mm Slide earings -2 mm Slide earings -3 Profile Slider -4 coslide 30x30xmm -6 coslide 30x30x160mm - coslide 4x4xmm -8 coslide 4x4x160mm -9 coslide 4x60xmm - coslide 4x60x160mm -11 coslide 4x90xmm -12 coslide 4x90x160mm -
-2 coslide Linear Sliding arriages and earings Slide earings 6mm and 8mm 6 8 These economical, low-wear sliding bearings can be used for sliding and lifting doors and drawers. Use them anytime two profiles need to be manually moved along the same plane. The offset slider () allows for multiple sliding elements, such as overlapping doors. 9.8 1 2 2 1 2 1 3.2 3.2 Material: elrin 18 2 26 18 26 OST 1. 18 26 11. 26 Item escription Part Number 6mm slide bearing, flat, one 3 842 23 2 8mm-to-8mm slide bearing, one 3 842 23 209 8mm slide bearing, one 3 842 23 2 8mm slide bearing, offset, one 3 842 23 211 8mm slide bearing, flat, one 3 842 23 212
coslide Linear Sliding arriages and earings 3 Slide earings mm These economical, low-wear sliding bearings can be used for sliding and lifting doors and drawers. Use them anytime two profiles need to be manually moved along the same plane. The offset slider () allows for multiple sliding elements, such as overlapping sliding doors. 2.6 2 2 1 4 Material: elrin 2.6 OST 1. 2.6 16.3 Item escription Part Number mm-to-mm slide bearing, one 3 842 23 20 mm slide bearing, one 3 842 23 206 mm slide bearing, offset, one 3 842 23 20 mm slide bearing, flat, one 3 842 23 208
-4 coslide Linear Sliding arriages and earings Profile Slider 8 Profile sliders are ideal for creating sliding or guillotine-type doors. They provide a smooth surface and act as stops when two sliders meet. The slides are mounted into 8mm or mm T-slots using the appropriate size T-block and a set screw. T-block must ordered separately. See page 4-. Set screw is available on page 4-. IN 914, ISO 402 M8 x 12 8 M8 x 20 See page 4- T-block Upper profile Material: elrin T-block Lower profile Profile slider 2 19.6 8.3 60 4x4 30x30 30x30 4x4 4x4 30x30 escription Part Number Profile slider, one 3 842 1
coslide Linear Sliding arriages and earings coslides 8 coslides are economical linear bearings for precise positioning. ach coslide bearing uses elrin bearing pads for maximum loading. elrin bearing pads absorb less moisture and are less prone to high temperatures in harsh environments than alternative materials. apable of locking in position with the optional locking handle, coslide bearings are available for use with several profile sizes. 30x30xmm -6 30x30x160mm - or locking handle a 9mm dia. hole must be drilled and bearing must be milled per drawing specifications. 4x4xmm -8 eatures: Heavy loading elrin bearing pads asy assembly 4x4x160mm -9 Machining Required: 4mm tap in elrin for M4x12 fastening screws 9mm hole and milled slot per specifications on individual bearing pages for mounting optional locking handle Material: coslide arriage: 6063-T6 natural anodized aluminum coslide earing: elrin 0 coefficient of friction: 2% Locking Handle: Lever: polyamide anthracite Spindle: pressure die-cast zinc Stem: galvanized steel.8 8mm and mm T-block: galvanized steel 4x60xmm - 4x60x160mm -11 4x90xmm -12 4x90x160mm -
20.2-6 coslide Linear Sliding arriages and earings coslide 30x30xmm 8 or use with 30x30 and 30x60 profiles. 1 40.3.1 9. 94 3. 9. 9 14. 2 Technical ata Moment of inertia Ix = 86.1cm 4 Iy = 14.0cm 4 Safe loading of coslide carriage 4 N at 12 m/min. 40.4 1 26 ssembly Note 29. 29. 6. earing specifications for locking handle Item escription Qty Req d Part Number coslide 30x30x carriage, one 1 8 981 3 46 8mm coslide bearing, 1 T-slot, flat, one 3 3 842 23 212 8mm bearing shim, mm thick, package of 4 as needed 8 981 3 49 M4x12 IN 942, HS, black screw, one 9 8 981 012 28 Locking handle, 20mm, optional for locking, one as needed 3 842 16 846 T-block M8, 8mm, optional for locking, one as needed 3 842 14 931
20.2 coslide Linear Sliding arriages and earings coslide 30x30x160mm 8 or use with 30x30 and 30x60 profiles. 1 40.3 160 30.1 9. 94 3. 9. 1 9 14. 26 2 Technical ata Moment of inertia Ix = 86.1cm 4 Iy = 14.0cm 4 Safe loading of coslide carriage 1494 N at 12 m/min. 40.4 ssembly Note 29. 29. 6. earing specifications for locking handle Item escription Qty Req d Part Number coslide 30x30x160 carriage, one 1 8 981 3 4 8mm coslide bearing, 1 T-slot, flat, one 6 3 842 23 212 8mm bearing shim, mm thick, package of 4 as needed 8 981 3 49 M4x12 IN 942, HS, black screw, one 18 8 981 012 28 Locking handle, 20mm, optional for locking, one as needed 3 842 16 846 T-block M8, 8mm, optional for locking, one as needed 3 842 14 931
23.6-8 coslide Linear Sliding arriages and earings coslide 4x4xmm or use with 4x4, 4x4H, 4x90, 4x90H, and 4x1 profiles. 14. 9. 9 38 Technical ata 1 4.3.1 9 90 4 9. Moment of inertia Ix = 14cm 4 Iy = 369.4cm 4 Safe loading of coslide carriage 120 N at 12 m/min..4 1 ssembly Note 29. 29. 11.3 earing specifications for locking handle Item escription Qty Req d Part Number coslide 4x4x carriage, one 1 8 981 3 323 mm coslide bearing, 1 T-slot, flat, one 3 3 842 23 208 mm bearing shim, mm thick, package of 4 as needed 8 981 3 494 M4x12 IN 942, HS, black screw, one 9 8 981 012 28 Locking handle, 20mm, optional for locking, one as needed 3 842 16 846 T-block M8, mm, optional for locking, one as needed 3 842 218 993
23.6 coslide Linear Sliding arriages and earings 9 coslide 4x4x160mm or use with 4x4, 4x4H, 4x90, 4x90H, and 4x1 profiles. 14. 9. 9 38 Technical ata 160 1.1 30 9 90 4 9. Moment of inertia Ix = 14cm 4 Iy = 369.4cm 4 Safe loading of coslide carriage 24 N at 12 m/min. 4.3 1.4 ssembly Note 29. 29. 11.3 earing specifications for locking handle Item escription Qty Req d Part Number coslide 4x4x160 carriage, one 1 8 981 3 324 mm coslide bearing, 1 T-slot, flat, one 6 3 842 23 208 mm bearing shim, mm thick, package of 4 as needed 8 981 3 494 M4x12 IN 942, HS, black screw, one 18 8 981 012 28 Locking handle, 20mm, optional for locking, one as needed 3 842 16 846 T-block M8, mm, optional for locking, one as needed 3 842 218 993
23.6 - coslide Linear Sliding arriages and earings coslide 4x60xmm or use with 4x60H profiles. 9. 9 14. 38 Technical ata 1 4.3.1 124 2. 9. Moment of inertia Ix = 2296.2cm 4 Iy = 382.cm 4 Safe loading of coslide carriage 120 N at 12 m/min. 0.4 1 29. ssembly Note 29. 11.3 earing specifications for locking handle Item escription Qty Req d Part Number coslide 4x60x carriage, one 1 8 981 3 48 mm coslide bearing, 1 T-slot, flat, one 3 3 842 23 208 mm bearing shim, mm thick, package of 4 as needed 8 981 3 494 M4x12 IN 942, HS, black screw, one 9 8 981 012 28 Locking handle, 20mm, optional for locking, one as needed 3 842 16 846 T-block M8, mm, optional for locking, one as needed 3 842 218 993
23.6 coslide Linear Sliding arriages and earings 11 coslide 4x60x160mm or use with 4x60H profiles. 4.3 160 1.1 30 9. 124 2. 1 9. 9 14. 38 Technical ata Moment of inertia Ix = 2296.2cm 4 Iy = 382.cm 4 Safe loading of coslide carriage 24 N at 12 m/min. 0.4 29. ssembly Note 29. 11.3 earing specifications for locking handle Item escription Qty Req d Part Number coslide 4x60x160 carriage, one 1 8 981 3 49 mm coslide bearing, 1 T-slot, flat, one 6 3 842 23 208 mm bearing shim, mm thick, package of 4 as needed 8 981 3 494 M4x12 IN 942, HS, black screw, one 18 8 981 012 28 Locking handle, 20mm, optional for locking, one as needed 3 842 16 846 T-block M8, mm, optional for locking, one as needed 3 842 218 993
23.6-12 coslide Linear Sliding arriages and earings coslide 4x90xmm or use with 4x90, 4x90H, 90x90, and 90x90H profiles. 14. 9. 9 38 Technical ata 1 4.3.1 4 14 4 9. Moment of inertia Ix = 4344.2cm 4 Iy = 404.cm 4 Safe loading of coslide carriage 24 N at 12 m/min. 0 1 ssembly Note 29. 29. 11.3 earing specifications for locking handle Item escription Qty Req d Part Number coslide 4x90x carriage, one 1 8 981 3 32 mm coslide bearing, 1 T-slot, flat, one 4 3 842 23 208 mm bearing shim, mm thick, package of 4 as needed 8 981 3 494 M4x12 IN 942, HS, black screw, one 12 8 981 012 28 Locking handle, 20mm, optional for locking, one as needed 3 842 16 846 T-block M8, mm, optional for locking, one as needed 3 842 218 993
23.6 coslide Linear Sliding arriages and earings coslide 4x90x160mm or use with 4x90, 4x90H, 90x90, and 90x90H profiles. 14. 4.3 160 1 30.1 9. 4 14 4 9 9. 38 Technical ata Moment of inertia Ix = 4344.2cm 4 Iy = 404.cm 4 Safe loading of coslide carriage 481 N at 12 m/min. 1 0 ssembly Note 29. 29. 11.3 earing specifications for locking handle Item escription Qty Req d Part Number coslide 4x90x160 carriage, one 1 8 981 3 326 mm coslide bearing, 1 T-slot, flat, one 8 3 842 23 208 mm bearing shim, mm thick, package of 4 as needed 8 981 3 494 M4x12 IN 942, HS, black screw, one 12 8 981 012 28 Locking handle, 20mm, optional for locking, one as needed 3 842 16 846 T-block M8, mm, optional for locking, one as needed 3 842 218 993