PETROLEUM TANKS LIST PRICE EFFECTIVE: JANUARY 1, 2018 PUBLICATION NO. PG 11000X SUPERSEDES PG 11000W01/18
TABLE OF CONTENTS: Double-Wall Tanks...3 Tank Mounted Accessories...4 Miscellaneous Accessories...5 Deadman Anchoring...6 Compartment Tank Extensions...7 Tank Sumps...8 Tank Sump Accessories...12 CONDITIONS OF SALE Containment Solutions, Inc. (CSI) fiberglass underground petroleum storage tanks are to be installed according to NFPA 30 or 31A and current installation instructions as outlined in Pub. No. INST 6001. Local codes may apply and should be consulted. Fiberglass tanks require proper selection of backfill materials and good construction practices during installation. Double-Wall Tanks are for the storage of petroleum products, alcohols, and alcohol-gasoline mixtures as defined in Pub. No. TNK 1001. The proper handling, installation and care of all tanks are the responsibility of the purchaser and any loss or damage resulting from improper installation, handling or care, or from storage of a product not approved by CSI, shall not be the responsibility of CSI. General terms and conditions of sale apply to these products and are stated in CSI Terms and Conditions as written on the order acknowledgment and invoice. All prices are stated in USD and subject to change without notice. Payment Terms: Subject to approval. WARRANTY Product warranties are available on the CSI website or by calling your local sales representative. Product warranties are suspended until the CSI invoice is paid in full. CSI does not warrant any installed product, component or parts manufactured by others. All consumable parts including but not limited to gaskets and o-rings are excluded from all CSI warranties. SHIPPING TERMS F.O.B. Manufacturing Plants: Bakersfield, California Tulsa, Oklahoma Mt. Union, Pennsylvania All prices herein are F.O.B. shipping point. Freight invoiced to customer, sellers routing. Reference the most current Freight & Delivery Zone Rate Schedule. Fuel surcharges may be added to the invoice as necessary. All orders subject to minimum-order value. Taxes not included. Containment Solutions, Inc. 333 North Rivershire Dr., Suite 190 Conroe, Texas 77304 Tel: (936) 756-7731 Fax: (936) 756-7766 www.containmentsolutions.com
DOUBLE-WALL TANKS NOMINAL CAPACITY (GALLONS) [1] MADE -TO- ORDER PRICE BRINE FILLED INTERSTICE & RESERVOIR NO. STRAPS REQUIRED (not included in price) NOMINAL LENGTH TANK LENGTH / WEIGHT (FT. / LBS.) NOMINAL WEIGHT NOMINAL WEIGHT W/ BRINE 40,000 $190,610 $14,995 (10) 71' 4" 19,300 27,750 35,000 $159,565 $12,465 (8) 63' 1" 17,000 24,350 30,000 $133,655 $9,715 (8) 54' 7" 14,500 20,400 10 25,000 $111,195 $8,125 (8) 46' 0" 12,250 17,100 20,000 $81,025 $6,535 (6) 37' 6" 9,750 13,550 15,000 $65,705 $5,200 (4) 29' 3" 7,700 10,500 12,000 $58,125 $3,645 (4) 23' 9" 6,550 8,600 10,000 $54,370 $3,365 (3) 20' 11" 5,850 7,500 15,000 $69,575 $4,325 (6) 44' 7" 7,500 9,350 12,000 $49,415 $3,730 (4) 36' 0" 5,550 7,050 8 10,000 $39,530 $3,415 (4) 30' 6" 4,800 5,950 8,000 $34,095 $3,040 (4) 25' 0" 4,050 5,000 6,000 $30,640 $2,780 (2) 19' 6" 3,300 4,050 5,000 $26,890 $2,555 (2) 16' 9" 2,950 3,600 6,000 $34,250 $2,735 (4) 30' 3" 4,050 5,100 6 5,000 $31,365 $2,550 (4) 25' 0" 3,450 4,350 4,000 $27,480 $2,400 (2) 19' 9" 2,900 3,550 3,000 $23,580 $2,245 (2) 16' 9" 2,450 3,000 2,500 $21,370 $2,160 (2) 13' 9" 2,150 2,650 4 1,000 $14,210 $1,145 (2) 11' 1" 950 1,235 600 $10,740 $1,105 (2) 7' 3" 750 975 Note: [1] For 12 diameter tank prices, call your CSI inside sales representative. 3
TANK MOUNTED ACCESSORIES Manways & Extensions (Fig. 1-2) 22" 30" 36" Double-Wall Tank Manway [1] (Fig. 1) $2,950 $5,745 $10,650 Manway Extensions [2] (Carbon Steel Hardware) (Fig. 2) $1,795 $4,680 $7,425 Manway Extensions - SS [2] (304 Stainless Steel Hardware) $1,870 $5,020 --- Manway Extension additional length per foot $490 $1,440 $2,175 Fig. 1 Fig. 2 Manway Accessories (Fig. 3-4) Carbon Steel Manway Cover (blind) (Fig. 3) $495 $1,080 $1,345 Bolts, Nuts, Washers & Gaskets $290 $385 $685 304 Stainless Steel Manway Cover (blind) (Fig. 3) $1,585 $2,165 --- Bolts, Nuts & Washers for Stainless Steel Lid $325 $425 --- EPDM or Teflon Gasket for Stainless Steel Lid $290 $340 --- 304 Stainless Steel Bolt Rings (Supplied in 2 Halves) (Fig. 4) $935 $1,275 --- Fig. 3 Fig. 4 Manway Fittings - NPT Couplings (Fig. 5) 2" 4" 6" 8" HALF Coupling - Carbon Steel --- $370 $710 $1,235 HALF Coupling - 304 Stainless Steel $360 $530 $1,410 $1,955 FULL Coupling - Carbon Steel $495 $525 $950 $1,635 FULL Coupling - 304 Stainless Steel $510 $840 $2,045 $2,855 Fig. 5 Tank Mounted Fittings [3] (Fig. 6) 4" 6" 8" HALF coupling fitting Carbon Steel $965 $1,435 $2,410 HALF coupling fitting 304 Stainless Steel $1,430 $2,335 $4,355 HALF coupling fitting Fiberglass $1,085 $1,505 --- Fig. 6 Double NPT Couplings [3] (Fig. 7) Unit Price 4" HALF coupling fitting Carbon Steel $1,750 4" FULL coupling fitting Carbon Steel $2,445 Fig. 7 Fig. 8 Fiberglass Flanged and Plate Gusseted Nozzles [4][5] (Fig. 8) 2" nozzle $1,615 4" nozzle $2,065 6" nozzle $2,475 8" nozzle $3,460 10" nozzle $3,620 Notes: [1] Manway price includes a deflector plate, steel lid and hardware. [2] Manway extensions include nuts, bolts, washers and gasket. [3] Includes deflector plate. [4] Includes deflector plate (top center line only). [5] Will support 400 lbs. 4
MISCELLANEOUS ACCESSORIES Ladders (Fig. 9) 4' Tank 6' Tank 8' Tank 10' Tank 12' Tank Carbon Steel $1,490 $1,555 $1,570 $1,680 $1,805 Aluminum $1,675 $1,975 $2,305 $2,885 $3,405 Fiberglass [6] $1,675 $1,975 $2,305 $2,885 $3,405 304 Stainless Steel $1,675 $1,975 $2,305 $2,885 $3,795 Fig. 9 Heating Coil [7] (Fig. 10) Helical Heating Coil --- $6,790 $6,985 $7,155 $7,340 Fig. 10 Tank Bottom Sumps (Fig. 11) Unit Price 8" diameter x 4" depth $3,250 Additional Deflector Plates (Fig. 12) Carbon Steel Stainless Steel 12" x 12" $250 $370 24" x 24" $685 $1,005 Fig. 11 Tank Identification Tags (Fig. 13) Tank Tag $290 Optional cement casing $290 Fig. 12 Unattached Riser [8] (Fig. 14) Fig. 14 48" diameter x 42" Length (L dimension) $1,495 Extra length / ft. (extended L dimension) $295 Additional Accessories (Fig. 15-18) Size Unit Price Secondary FRP containment fitting, tank mounted [9] (Fig. 15) 6" $1,100 Reducer Bushings (Fig. 16) 4" x 1" x 1" $275 4" x 2" $275 6" x 4" $275 Extra tank mounted lift lug (Fig. 17) 4', 6', 8' tanks $340 10' tanks $475 Extra lift lug plug [10] (Fig. 18) 4' tanks only $475 Fig. 15 Fig. 16 Crating / Drop Off / Pick Ups Unit Price Skid charge (2,500 gallon capacity and smaller) $665 Customer pick up $260 Nylon straps (export, minimum of 2) $305 UPS accessory shipment $140 Double-wall annular space vacuum gauge $220 Fig. 17 Fig. 18 Notes: [6] NOT UL approved - must be field installed. [7] Includes manway cover with suction and return lines. [8] Includes 24" x 24" square opening in top. [9] Does not include primary tank fitting. [10] Only available for 4' diameter tanks, includes 4" NPT coupling fitting and deflector plate. 5
DEADMAN ANCHORING TANK CAPACITY (GALLONS) # & SIZE OF DEADMEN DEADMEN PRICE STANDARD STRAPS TURNBUCKLES [1] SPLIT STRAP ASSEMBLY # REQ. PRICE # REQ. PRICE PRICE 40,000 (8) - 18' LP $16,045 (10) $4,050 (20) $7,400 $24,750 35,000 (2) - 18' LP & (4) - 22' LP $12,690 (8) $3,240 (16) $5,920 $19,940 30,000 (6) - 18' LP $12,035 (8) $3,240 (16) $5,920 $19,940 10 25,000 (4) - 14' LP & (2) - 18' LP $11,270 (8) $3,240 (16) $5,920 $19,940 20,000 (4) - 18' LP $8,020 (6) $2,430 (12) $4,440 $15,135 15,000 (4) - 14' LP $7,260 (4) $1,620 (8) $2,960 $10,330 12,000 (2) - 22' LP $4,340 (4) $1,620 (8) $2,960 $10,330 10,000 (2) - 18' LP $4,010 (3) $1,215 (6) $2,220 $7,925 8 15,000 (2) - 12' & (4) - 16' $7,915 (6) $2,250 (12) $3,540 $14,905 12,000 (4) - 18' $6,215 (4) $1,500 (8) $2,360 $10,175 10,000 (4) - 16' $5,610 (4) $1,500 (8) $2,360 $10,175 8,000 (4) - 12' $4,620 (4) $1,500 (8) $2,360 $10,175 6,000 (2) - 18' $3,105 (2) $750 (4) $1,180 $5,445 5,000 (2) - 16' $2,800 (2) $750 (4) $1,180 $5,445 6,000 (4) - 14' LP $7,260 (4) $1,300 (8) $2,000 $9,695 6 5,000 (2) - 22' LP $4,340 (4) $1,300 (8) $2,000 $9,695 4,000 (2) - 18' LP $4,010 (2) $650 (4) $1,000 $5,205 3,000 (2) - 14' LP $3,630 (2) $650 (4) $1,000 $5,205 2,500 (2) - 14' LP $3,630 (2) $650 (4) $1,000 $5,205 4 1,000 (2) - 14' LP $3,630 (2) $610 ---- ---- ---- 600 (2) - 14' LP $3,630 (2) $610 ---- ---- ---- STRAPS Standard Strap Split Strap 4' Diameter $305 ---- 6' Diameter $325 $1,695 8' Diameter $375 $1,740 10' Diameter $405 $1,775 TURNBUCKLES (TB) Model Price 6' Diameter TB3406 $250 8' Diameter TB3409 $295 10' Diameter TB3418 $370 INDIVIDUAL DEADMAN PRICES 12' L 14' L 16' L 18' L 20' L 22' L 12" x 12" $1,155 ---- $1,400 $1,555 $1,670 ---- 18" x 8" (LP) ---- $1,815 ---- $2,005 ---- $2,170 LP = Low Profile [1] Note: 6 diameter tanks where deadmen are buried 12 below tank bottom, call your CSI inside sales representative for alternate turnbuckles and pricing. 6
COMPARTMENT TANK EXTENSIONS Made To Order Tank Extension The price guide allows for one tank extension per MTO tank. For additional extensions (or more than 2 compartments) contact your CSI representative. Tank extension prices are based on double-wall shells and double-wall bulkhead(s). Tank extensions are available with either a dry cavity or brine filled interstitial space. CAPACITY (GALLONS) TANK EXT. PRICE [1][2] ANCHOR STRAPS (# OF STRAPS REQ D) [3] NOMINAL LENGTH WEIGHT ADDER (LBS.) DRY CAVITY BRINE FILLED 10,000 $53,530 $1,620 (4) 17' 9" 6075 8300 10 8,000 $35,465 $810 (2) 14' 9" 4875 6875 7,000 $31,340 $810 (2) 12' 4200 5850 6,000 $30,625 $810 (2) 10' 7" 3850 5350 Maximum total compartment tank capacity cannot exceed 50,000 gallons 7,000 $37,230 $1,500 (4) 20' 3" 3600 4450 8 6,000 $36,055 $750 (2) 17' 6" 3200 4000 5,000 $26,095 $750 (2) 14' 6" 2550 3350 4,000 $21,980 $750 (2) 11' 9" 2200 2800 Maximum total compartment tank capacity cannot exceed 20,000 gallons 6 3,000 $24,180 $650 (2) 14' 3" 2050 2575 2,000 $20,215 $650 (2) 10' 2" 1600 1975 Maximum total compartment tank capacity cannot exceed 10,000 gallons Notes: [1] Manways are required in all compartments. [2] Price does not include manways, fittings, or other accessories except lift lugs and an annular space fitting. [3] Prices include total number of straps required per tank. Split-straps are extra and include necessary hardware and (1) tightener. 7
ROUND SINGLE-WALL TANK SUMPS Round single-wall tank sumps include a sump lid, enclosure top, round sump body and AD kit(s). Watertight sumps include a watertight lid and two (2) AD kits which are used to easily bond sump parts by way of adhesive channels. Sump opening dimensions reflect the outer diameter of the sump lid, the accessible opening of the sump is smaller in diameter. 34 40 3-7 3-7 42 or 48 Diameter 48 or 54 Diameter 34 Opening Watertight Sump 40 Opening Watertight Sump 34 OPENING 40 OPENING FRICTION FIT WATERTIGHT FRICTION FIT WATERTIGHT 42" Diameter 3' $1,925 $4,215 --- --- 4' $2,160 $4,440 --- --- 5' $2,305 $4,585 --- --- 6' $2,490 $4,895 --- --- 7' $2,845 $5,140 --- --- 48" Diameter 3' $2,160 $5,245 $2,700 $5,630 4' $2,535 $5,505 $3,170 $5,915 5' $2,745 $5,735 $3,435 $6,165 6' $2,975 $5,955 $3,500 $6,405 7' $3,250 $6,130 $4,065 $6,590 54" Diameter 3' --- --- $3,535 $7,065 4' --- --- $3,980 $7,415 5' --- --- $4,410 $7,755 6' --- --- $4,835 $8,035 7' --- --- $5,270 $8,270 8
POLYGON SINGLE-WALL TANK SUMPS Polygon single-wall tank sumps include a sump lid, enclosure top, 8 panel polygon body, and (2) AD kits. The flat panels on the polygon body allow for 45 and 90 penetration fittings. Single-Wall polygon sumps utilize adhesive channels for easier field bonding. Sump opening dimensions reflect the outer diameter of the sump lid, the accessible opening of the sump is smaller in diameter. 34 40 3-7 3-7 42 or 48 Diameter 48 or 54 Diameter 34 Opening Watertight Sump 40 Opening Watertight Sump 34 OPENING 40 OPENING FRICTION FIT WATERTIGHT FRICTION FIT WATERTIGHT 42" Diameter 3' (SBS) [1] $4,080 $5,275 --- --- 4' $4,095 $5,285 --- --- 5' $4,455 $5,635 --- --- 6' $4,805 $5,975 --- --- 7' $5,160 $6,355 --- --- 48" Diameter 3' (SBS) [1] $4,445 $5,735 $5,560 $6,165 4' $4,465 $5,780 $5,580 $6,215 5' $4,880 $6,220 $6,090 $6,685 6' $5,285 $6,635 $6,610 $7,125 7' $5,690 $7,170 $7,110 $7,700 54" Diameter Notes: [1] Shallow Bury Sump (SBS) 4' --- --- $6,445 $7,960 5' --- --- $6,880 $8,395 6' --- --- $7,315 $8,935 7' --- --- $7,740 $9,680 9
POLYGON DOUBLE-WALL TANK SUMPS All double-wall sumps include a watertight lid and integral reservoir for interstitial space monitoring. Sumps are shipped in multiple pieces and require field assembly to install properly. There are two (2) double-wall sump models and three (3) diameters available for each. One (1) MFFK is shipped with each order for brine filling. All prices and models are based on brine filled sumps. EZ-FIT MODEL DW SUMP The EZ-Fit tanks sump (AD model) features EZ-Fit adhesive channels for easier field bonding. 42 and 48 EZ-Fit sump prices include (4) AD kits, 54 EZ-Fit sump prices include (6) AD kits. This sump is eligible for the 30-year HydroGuard warranty when purchased with a CSI double-wall hydrostatically monitored tank. BASIC LK DW SUMP The LK sump (LK model) relies on field bonded butt joints by means of glass and resin lay-ups. 42 and 48 sump prices include (4) LK kits, 54 sump prices include (6) LK kits. 34 40 3-7 3-7 42 or 48 Diameter 48 or 54 Diameter 34 Opening EZ-Fit Sump 40 Opening EZ-Fit Sump 34 OPENING 40 OPENING EZ-Fit (AD) LK Model EZ-Fit (AD) LK Model 42" Diameter 4' $14,790 $13,570 --- --- 5' $15,255 $14,005 --- --- 6' $15,785 $14,450 --- --- 7' $16,235 $14,830 --- --- 48" Diameter 4' $15,860 $14,830 $16,225 $15,265 5' $16,360 $15,140 $16,720 $15,780 6' $16,920 $15,585 $17,295 $16,365 7' $17,420 $16,025 $17,800 $16,875 54" Diameter 4' --- --- $17,500 $17,825 5' --- --- $18,690 $18,995 6' --- --- $19,825 $19,315 7' --- --- $21,030 $20,370 10
TANK SUMP ACCESSORIES Flat Bottom Round FBS 42" or 48" [1][2] 42" Dia. 48" Dia. Single-Wall Sump Adder $1,420 $1,525 Fig. 1 Flat Bottom Polygon FBS 42" or 48" [1][2] Single-Wall Sump Adder $1,420 $1,525 Double-Wall Sump Adder $1,490 $1,590 SW Watertight Tank Sump Parts Fig. 2 (WT34) Sump Top $1,355 $1,530 (WT34) Gasket $135 $135 (WT40) Gasket $175 $175 SW Friction Fit Tank Sump Parts (FF34) Sump Top $530 $700 Fig. 3 Secondary Containment Collar (Fig. 1) Single-Wall Double-Wall 42" Diameter Collar - 6" $1,795 $2,175 42" Diameter Collar - 14" [3] $2,185 --- 48" Diameter Collar - 6" $2,170 $2,405 48" Diameter Collar - 14" [3] $2,625 --- 54" Diameter Collar - 6" $3,655 $3,820 Fig. 4 Collar Strap Channel [4][5] (Fig.2) Unit Price Single-Wall Strap Channel - 42" Collar $905 Single-Wall Strap Channel - 48" Collar $1,025 Turbine Lid (Fig. 3) Turbine Lid for 34" opening (WT or FF sump) $670 Turbine Lid for 40" opening (WT or FF sump) $810 Fig. 5 Fill Vapor Lid (Fig. 4) FV 2/15/16 (15" cuffs) [6] $670 FV 2/13/16 (13" cuffs) [6] $670 Quad Fill (4 cuffs) [7] $1,330 Factory Installed Inspection Port (Fig. 5) INS4-4" Watertight Port $490 INS6-6" Watertight Port $520 Notes: [1] Select Desired Tank Sump first, then add sump bottom price. Tank Mounted Adapters are supplied by others. [2] Flat Bottom Sumps may also be used as Transition Sumps. [3] Additional delivery charges apply. [4] Strap channel required when hold down strap intersects collar. [5] Split Strap will not fit inside containment collar. [6] Available for tank sumps with 34" openings only. [7] Available for tank sumps with 40 openings only. 11
TANK SUMP ACCESSORIES Kits for Joining Sump Components [8] Unit Price KIT LK - for Layups $410 KIT AD - for Adhesive Channels $410 Fig. 6 Monitoring Fluid Fill Kit Monitoring Fluid 5 Gallon Brine Bucket $40 5 Gallon Propylene Glycol Bucket $120 Fig. 7 Monitoring Fluid Fill Kit for Fill DW Tank Sumps (Fig. 6) MFFK $275 Test / Drain Fitting (Fig. 7) Collar Fitting $165 Fig. 8 Field Installed Inspection Port Kits [8] (Fig. 8) KIT-INS4 Includes 4" Watertight Port $490 KIT-INS6 Includes 6" Watertight Port $520 Notes: [8] Hazardous material - ground shipment only (3-5 days) 12
333 North Rivershire Drive, Suite 190 Conroe, Texas 77304 Tel: (936) 756-7731 Fax: (936) 756-7766 www.containmentsolutions.com While Containment Solutions has taken every precaution as to the accuracy of content and data presented herein, Containment Solutions cannot be held responsible for the individual interpretation of the data presented, any loss or damage to any property whatsoever, injury or death to any persons whatsoever, or any claims, demands, actions, complaints, proceedings, judgment, losses, damages, compensation, liabilities, costs or charges, however arising from the unauthorized undirected use of this handbook or the data it contains. January 2018 Containment Solutions, Inc. All Rights Reserved Pub. No. PG 11000X