In-Head Automatic Swing Door Operator DORMA ED 200i
Increasing benefits for users, architects and designers The DORMA ED 200i incorporates a neat design that not only allows the unit to offer the same benefits as a traditional swing door operator, but it also offers a much-improved aesthetic appearance. In the past architects may have had to compromise their ideal designs when adding surface applied door automation units. Although these units can be housed behind covers that can be coloured to match their surroundings, they still compromise on the overall aesthetics of the installation. The DORMA ED 200i provides an alternative. The DORMA ED 200i does not incorporate any bulky box units or swing arms, it has been designed to fit almost invisibly within the transom of the door, making it the ideal swing door operator where aesthetics are important. Therefore, the unit gives architects and designers increased freedom in design. The DORMA ED 200i Unit Housed in an aluminium casing, the DORMA ED 200i drive unit is just 150mm in height by 152mm deep, which forms part of the transom above either a single or pair of doors and becomes part of the framework surrounding the door. The DORMA ED 200i is self-supporting and, therefore, can be fixed between two walls or posts. The unit can be supplied for doors up to 1050mm for single and 2000mm for a pair of doors. Access to the unit for maintenance is simple, as the casing includes an integral cover that allows easy access to all mechanical and electrical parts. Features and Benefits The ideal door operator where aesthetics are important fitting almost invisibly into the transom above the door No drive arm required thereby making the unit even less conspicuous Break out option enabling unhindered and rapid escape in case of an emergency in either direction Design based on the market leading DORMA ED 200 surface applied swing door operator assuring class-leading reliability Fully adjustable operating parameters to suit specific applications Compact enclosure blending in with surroundings of the door and adjacent fixed elements Optimum adaptability to individual requirements e.g. hospitals, public buildings, retail outlets and leisure facilities Numerous control options
Door Leaf Parameters Standard doors Single leaf Double leaf Doors with breakout Single leaf Double leaf Maximum door weight Maximum opening angle Doors with breakout and shearmag locking (Electromagnetic locking) Single leaf Double leaf DORMA ED 200i 800 1050 mm 1600 2000 mm 850 1050 mm 1700 2000 mm 100 kg (per door leaf) 155 degrees 950 mm 1900 mm Technical Data Adjustable closing force Size EN3-5 Enclosure Height 150mm Enclosure Width 152mm Weight single 19Kg (approx) Weight double 36Kg (approx) Max power consumption 50W Power supply data 230v 50/60Hz External power supply 12-24v AC 24V DC 560mA Degree of protection IP20 Temperature range -40-60 C Tested in accordance with the low voltage directives (CE) Quality-assured manufactured to ISO900 Type approved by the German Technical Inspectorate. TUV Accessory Standard Option Drive Unit and Controls Microprocessor control Function programs Off Automatic Hold Open Exit only De-energise or switch off door closer function Adjustable opening time Adjustable closing time Adjustable back-check Adjustable delayed closing action Connection for infra-red safety sensors (IRS) for pull and push side Shearmag locking (Electromagnetic locking) Connection for access control system Break out facility Control Option Connection for smoke detector Activation by radio remote control Accessories Infra-red safety sensors DORMA IRS 70, 90 or 120 PivotSafe finger protection Smoke detector DORMA RMZ 2 Smoke detector DORMA RM F type wall to floor safety barrier Glass infill Solid infill U type floor to floor safety barrier Glass infill Solid infill 1.5-5 secs. 3-6 secs.
150 45 Overall Frame Width 150 ED200i Operator 45 Clear Opening Height Clear Opening Height 150 Door Stop Ffl 45 30 Finger Guard EXTERNAL VIEW 100 Overall Frame Height Opening Height Outside Clear Opening Width 12 Threshold 7 Clearance Ffl PLAN VIEW VERTICAL SECTION Overall Frame Height 90 Pivot Ctr. 90 Pivot Ctr. PLAN SECTION
Breakout DORMA ED 200i offers an optional integral breakout facility, which ensures rapid, unhindered exit when it is needed most. In the case of an emergency the doors can be pushed manually in the opposite direction to the usual swing, suspending powered operation of the door. Since the breakout facility is mechanical, unhindered emergency exit is available from the unit regardless of whether there is power to the door, meaning that safety is not compromised at any time. In addition, DORMA ED 200i breakout facility incorporates a catch system which enables the doors to be easily reset after the swing doors have been broken out, allowing for correct and normal automatic operation to be resumed quickly and easily once the emergency has passed. 100 TYP BREAKOUT INSIDE Breakout Framed System Breakout AP System
IRS Infared Safety Sensors DORMA IRS infa-red safety sensors minimise the risk of people, animals or other obstructions being hit by automatically opening and closing swing doors. The sensors operate with an active infa-red beam and thus detect any change which occurs within their scanning range. Safety Reversal STOP Mounted on the pull side, the DORMA IRS 70, 90 and 120 infa-red sensors monitor the opening sweep of the door. In the event that someone coming from the push side initiates an opening pulse while a person or obstruction is located in the sweep range, the IRS sensors disable the opening action. Note if a swing door in the open position can be approached from the side then a barrier should be installed along the line of the door leaf in its open position. The DORMA IRS 33 infa-red sensor is mounted on the push side and performs three tasks: In the area closest to the door, it acts as an activator to open the door. When the door is opened, it prevents it from closing again - irrespective of the preset hold-open time - while there are persons or obstructions located in the passage zone. If a door is stopped by a pull-side sensor, it ensures that the door is only released for operation again once the passage is free. Where it is necessary to prevent passers-by from triggering an opening pulse (e.g. in doors located in corridor walls), the sensors can be switched off when the door is closed by DORMA ED 200i swing operators featuring the enhanced control system. Features and Benefits IRS Safety Sensors Pre-assembled complete ready for installation and connection, with infa-red permeable plastic lens. Integrated activating and control electronics. Sensitivity potentiometer-adjustable. Available in four lengths to suit all door widths. Monitored zone adjustable in the vertical direction in three stages, and in the horizontal direction by sliding the sensors within their housing; range adjustable up to approx. 1000 mm in front of the door for an installation height of max. 2100 mm. Non-handed. Suitable for installation on the push and pull side of the door. Power supply via DORMA ED 200i. Technical Data Type DORMA Length Sensors IRS 33 333 mm 1 sensor IRS 70 700 mm 1 sensor IRS 90 900 mm 2 sensors IRS 120 1200 mm 2 sensors
Activators Program Switches Radar Motion Detectors Switches, Pushbuttons For external installation. Concealed or surface-mounted. Lockable with rotary knob. Suitable for concealed box. Frames in various colours. Radio Remote Controls Eagle system. Directionally sensitive. Non-directionally sensitive (standard model). Black finish. Comprehensive range of accessories. Ceiling installation sets. Weather-resistant cover Push Switches Concealed/surface-mounted installation. Stainless steel finishes. Water-resistant models. Key switches and push-buttons. Foot switch for wall or floor installation. Elbow pads and palm switches for wall installation. Various transmitters and receivers for VHF and UHF operation. Single-channel. Multi-channel. Large operating surface. Surface-mounted version. No concealed box necessary. Wireless operation by radio remote control possible. Specification The automatic swing door operator for the application shall be the DORMA ED 200i automatic electro-hydraulic in-head swing door operator. The operator shall be of compact design (150mmx152mm) and is to form the transom above the door. The operator shall comprise motor pump unit, opening and closing elements and integral electronic control. The closing force of the automatic door operator shall be spring size 3-5. The unit shall provide electro-hydraulic opening and spring closing. Hold-open is to be achieved by means of a built-in continuous duty solenoid valve and is to be fully adjustable up to a maximum of 60 seconds. Opening and closing speeds and also opening and closing damping are to be independently adjustable. The automatic in-head swing door unit is to offer three switchable programs: off, automatic, hold open and must offer connection facilities for peripheral equipment DORMA IRS safety sensor strips, door actuator, door lock, switching relays etc. Upon power failure to the unit, the operator shall function as a manual swing closer. Safety to the door is to be provided by the DORMA IRS safety system, with one IRS unit to be mounted to each side of the door. Where the breakout safety system is installed the automatic in-head swing door operator is to feature a breakout system, whereby the doors can be pushed open against the normal direction of opening in case of emergency, with the automatic operation of the doors being suspended when this occurs. After having been broken out, the systems is to be restored to its automatic state by pushing the door through the closed position in the usual direction of opening and resetting the catch.
DORMA UK Limited Automatics Division Wilbury Way Hitchin Hertfordshire SG4 0AB Tel: 01462 477600 Fax: 01462 477601 E-mail: autos@dorma-uk.co.uk DORMA Ireland Limited 19 Sandyford Office Park Foxrock Dublin 18 Tel: 01 295 8280 Fax: 01 295 8284 E-mail:dormadublin@dorma.com www.dorma-uk.co.uk