Characteristics Seat valves series D4S are designed for directional control functions. A large variety of poppets, springs and covers - including shuttle valves, stroke limiters, solenoid valves (VV01) and position control - allow to design individual hydraulic solutions for nominal flow up to 00 l/min. A complete program is offered under the Denison brand: subplate mounted valves (D4S - chapter ), SAE flange valves (D5S - chapter 9), pipe mounted valves (D4S - chapter 10), slip-in cartridges (CAR - on request). Features Leak-free seat valve design Numerous pilot options poppet types 3 sizes, NG10, 25, 32 D4S10-21
Ordering Code D4S 9 B Seat valve Nominal size Subplate mounting ISO 24 Y1 port G¼" Pilot connection Cap version Sleeve Spool type Spring Switching type Solenoid voltage Design series Seals Options Code Nominal size 03 NG10 0 NG25 10 NG32 Code omit 013 Options Standard Cover for end position control Code Pilot oil line in body A-X B-Y 1 internal from A 2 internal from X A 1) internal from A B 1) external from X C internal from A + B D internal from B G external from Y 1) With VV01 only Code Ports X Y Z X-Y Y1 VV01 Standard 1 Pilot oil = pilot drain C Pilot oil = pilot drain With solenoid valve (VV01) 2 Ext. PD from cap Internal pilot drain With stroke limiter (not for D4S03) 3 Pilot oil = pilot drain 4 Pilot oil = pilot drain Code Sleeve 1 AA=95%, AB=5% 3 AA=0%, AB=40% Code Size Poppet type Sleeve 1 03, 0,10 With closed bottom and 15 chamfer (pz max. = pa +20bar 1 2 03 With 0.8 dia. orifice at the bottom and 15 chamfer 1 0, 10 With 1.2 dia. orifice at the bottom and 15 chamfer 1 4 03, 0,10 With closed bottom and 45 chamfer 1, 3 A 2) 0, 10 Safety spool (for position control only) 3 B 2) 0, 10 Throttle spool, 10 chamfer 3 C 2) 0, 10 Throttle spool, 3 chamfer 3 2) Springs 2, 3, 4 and only open bore closed bore orifice Ø 1.2-22 Code Solenoid voltage omit Standard G0R 12V= G0Q 24V= GAR 98V= GAG 205V= W0 115V / 50Hz W07 230V / 50Hz Code Switching type omit Standard 09 VV01 with manual override de-energized: power 10 VV01 without manual override comp. open 11 VV01 with manual override de-energized: power 12 VV01 without manual override comp. closed CA DA CB CD DB DD BH BK BN BQ BC BE BA BF BL Shuttle valve Shuttle valve Code Seals 1 NBR 5 FPM VV01 code 09 and shuttle valve code CA VV01 code 11 and shuttle valve code CA VV01 code 09 and shuttle valve code DA VV01 code 11 and shuttle valve code DA VV01 code 10 and shuttle valve code CA and position control 3) with amplifier VV01 code 12 and shuttle valve code CA and position control 3) with amplifier VV01 code 10 and shuttle valve code DA and position control 3) with amplifier VV01 code 12 and shuttle valve code DA and position control 3) with amplifier VV01 code 10 and position control 3) with amplifier VV01 code 12 and position control 3) with amplifier Position control 3) with amplifier Position control 3) with amplifier and shuttle valve code CA Position control 3) with amplifier and shuttle valve code DA 3) Position control for D4S0/10 only. Spring 2 or 4. Spool A and sleeve 3. Valve open: proximity switch damped. Spring (approx. cracking pressure [bar]) Code Sleeve Code 1 Sleeve Code 3 A -> B A -> B B -> A D5S03 D5S0/10 D5S03 D5S0/10 D5S03 D5S0/10 1 2.8 3.5.5.5 9.5 11.0 2 0.5 0.5 1.0 1.0 1.5 1.7 3 0.3 0.3 0. 0. 0.9 1.0 4 2.2 2.2 4.0 3.5 5.5.0 5 9.0 1.0 28.0 1.2 1.2 2.0 2.2 3.0 3.8 7 3.0 8.0 12.0
Technical Data General Size 03 0 10 Mounting Subplate mounting acc. to ISO 24 Mounting position unrestricted Ambient temperature [ C] -20...+50 Weight [kg] 2.7 4.5.0 Hydraulic Operating pressure [bar] Ports A, B up to 350; Port Y 140 (with VV01) Nominal flow [l/min] 180 30 00 Fluid Hydraulic oil as per DIN 51524...525 Fluid temperature [ C] -20...+80 Viscosity permitted [cst]/[mm 2 /s] 10...50 Viscosity recommended [cst]/[mm 2 /s] 30 Filtration ISO 440 (1999) 18/1/13 (acc. NAS 138: 7) Electrical (solenoid) Duty ratio [%] 100 Response time [ms] Energized / de-energized AC: 20/18, DC: 4/27 Code G0R G0Q GAR GAG W0 W07 Supply voltage [V] 12V = 24V = 98V = 205V = 150 at 50Hz 230 at 50Hz Tolerance supply voltage [%] +5...-10 +5...-10 +5...-10 +5...-10 +5...-10 +5...-10 Power consumption, hold [W] 31 31 31 31 78 78 Power consumption, in rush [W] 31 31 31 31 24 24 Max. switching frequency [1/h] AC: up to 7.200, DC: up to 1.000 Solenoid connection Connector as per EN175301-803 Protection class IP5 in accordance with EN 0529 (plugged and mounted) Coil insulation class H (180 C) D4S pilot configuration Subplate mounting -23
Characteristics p/q performance curves Selection of Cartridges Sleeve 1, poppet 1 Sleeve 1, poppet 2 Sleeve 1, poppet 4 Sleeve 3, poppet 4 Sleeve 3, poppet A Sleeve 3, poppet B/C 1 : 1.05 1 : 1.05 1 : 1.05 1 : 1.7 1 : 1.7 1 : 1.7 = 0.95 A C = 0.95 A C = 0.95 A C = 0. A C = 0. A C = 0. A C = 0.05 A C = 0.05 A C = 0.05 A C = 0.4 A C = 0.4 A C = 0.4 A C 15 chamfer 15 chamfer 45 chamfer 45 chamfer 45 chamfer 45 chamfer orifice safety spool throttle spool -24
Dimensions NG ISO-code X1 X2 X3 X4 X5 X X7 Y1 Y2 Y3 Y4 10 24-0-09-*-97 42.9 35.8 21.5-7.2 21.5 31.8.7 58.8 33.4 7.9 25 24-08-13-*-97 0.3 49.2 39.7-11.1 20. 44.5 79.4 73 39.7.4 32 24-10-17-*-97 84.2 7.5 59.5 42.1 1.7 24. 2.7 9.8 92.8 48.4 3.8 NG ISO-code B1 B2 H1 H2 H3 L1 L2 D1 D2 D3 t1 D4 t2 D5 D 10 24-0-09-*-97 87.3 33.35 83 21 45 29 94.8 15 7 7.1 8 M10 1 10.8 17 25 24-08-13-*-97 105 39.7 109.5 29 71.5 34.7 12.8 23.4 7.1 7.1 8 M10 18 10.8 17 32 24-10-17-*-97 120 48.4 120 29 82 30. 144.3 32 7.1 7.1 8 M10 20 10.8 17 NG ISO-code Bolt kit - DIN912 12.9 Surface finish NBR FPM 10 24-0-07-*-97 BK-M10 x 35-4pcs 3 Nm ±15% SK-R10MN50 SK-R10MV50 25 24-08-11-*-97 BK-M10 x 45-4pcs 3 Nm ±15% SK-R25MN50 SK-R25MV50 32 24-10-15-*-97 BK-M10 x 45-pcs 3 Nm ±15% SK-R32MN50 SK-R32MV50-25
Ordering Code Explanation (Examples) D4S direct operated D4S with VV01-2
Ordering Code Explanation (Examples) D4S with VV01 D4S with shuttle valve -27
Ordering Code Explanation (Examples) D4S with position control D4S with stroke limiter -28
Dimensions Dimensions D4S with VV01 Dimensions D4S with shuttle valve () Dimensions in brackets are for version VV01with shuttle valve code DB or DD. Note: Shuttle valves only use in connection with vent valve VV01. -29
Dimensions Dimensions D4S position control Technical data (proximity switch) Function PNP, contact Supply voltage (Us) [VDC] 10...30 Supply voltage ripple [%] 10 Current consumption [ma] max. 8 Residual voltage L-signal [V] Us - 2.2 at l max Output current (I) [ma] 200 Protection class IP7 Ambient temperature [C ] -25...+70 Wire cross section [mm 2 ] 3 x 0.5 Position control by proximity switch (incl. amplifier) Valve open: proximity switch activated. This proximity switch is pressure proof and has no wearing parts. Note Position control for D4S0 and D4S10 only. Dimensions D4S stroke limiter Note: Stroke limiter not for use with D4S03, vent valve VV01, shuttle valve and positon control. -30