UNIVERSAL GAUGES. Norminal pitch Double Go or Normina pitch Double Go or Diametr Ended No Go Diametr Ended No Go Go.& 6 g. Go.& 6 g.

Similar documents
NOTES FOR PLUG 30% RINGS UPTO 24MM 40% RINGS ABOVE 24 MM 40% 8) FOR LEFT HAND GAUGES ADD TO BASIC LIST PRICE.

(Click on the links below for the category contents) YONG. Custom Hex Plain Plug Gages.. Page 29. Custom Cylindrical Plain Ring Gages...

Accuracy Build Credibility

STAR TOOL SUPPLY / GRAND TOOL SUPPLY

List Ideal for Steels, Exotics and Difficult to Machine Materials. Type 5 (Lc=1 Thread) Type 6 (Lc=3 Threads) Miniature, Helical Flute

CMT Vertical Mill-Thread

Solid Carbide Thread Milling

Solid Carbide Thread Milling

Product features. only RS. Application-specific features RS. Indication for the RS UNF. 400 C max. 200 C. Lifting points ready for bolting RS RM

SOCKET HEAD CAP SCREWS METRIC SERIES M3-M36 RECOMMENDED RETAIL PRICES IN RUPEES PER 100 PIECES INCLUSIVE OF EXCISE DUTY & OCTROI

PLAIN RING THREAD RING TRUNCATED SET PLUG TAPERLOCK THREAD PLUG TAPERLOCK PLAIN PLUG TAPER PIPE PLUG REVERSIBLE PLAIN PLUG REVERSIBLE THREAD PLUG

SPIRAL POINT TAPS for through hole tapping

OMT Technical Information Shaft Version

Introduction. Sparkplug / Plugsaver Kits

TOTEM HSS HAND / SHORT MACHINE / LONG SHANK MACHINE TAPS

E R H 10 (N) - 11 (C) 1

Thread and Connector Identification

E R H 10 (N) - 11 (C) 1

LEADER CORPORATION CATALOG

PRODUCT NEW PRODUCT RANGE *PRICES OF ABOVE PRODUCTS ARE AVAILABLE ON REQUEST THE WORLD LEADER DURLOK BOLT DURLOK NUT UNBRAKO TENSION CONTROL BOLT

THREADING. Korloy threading tools are available for machining various shapes of thread at various pitches while ensuring high quality performances

Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving.

Mill - Thread Inserts and Kits

D24. American ACME D02 D25 D26 D28 D28. UNJ (Unified Constant Thread) American Buttress (ABUT) British Buttress (BBUT) D09 D29 D30 D30 D30

ThreadMill. For Thread Milling

Available manual, pneumatic, and hydraulic spool control kits.

HYDRAULIC MOTORS MLHH

CUP POINT M3 - M16 15

TAPS & DIES S.T.I. TAPS - HIGH SPEED GROUND MACHINE SCREW SIZES FRACTIONAL SIZES

ENGINEERING DATA. High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series. w w w. F l u i D y n e F P. c o m

ISO, SAE, DIN, JIS, BS, NF

37 flare couplings to ISO

Threadmill Nomenclature TMR N L ISO C

Threadmill Nomenclature TR N L ISO C

Conversion Factors 1

Bluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric

Tap and Drill Bit Selection Guide

Ø5 (Ø.20) S12,65 x 1,5. M16 x 1,5 * 2 Special thread: buttress thread S12,65 x 1,5. Max. Working Pressure: 400 bar / 5801 PSI Burst Pressure:

TESA IMICRO capa µ system with Digital Display

Static Pressure Manifolds M25, M25A, M25B, M251 and M251B

PRODUCT SELECTION GUIDE

TPI NO. OF DIA. THREAD EDP NO. SIZE UNC UNF FLUTES LIMIT LENGTH OAL SETS TAPER PLUG BOTTOM

P.F. Hexagon Head Bolts/Screws

Alcalab Private Limited, 3rd Floor, Ashiana Trade Centre, Adityapur, Jamshedpur, Jharkhand. Discipline Mechanical Calibration Issue Date

turning and milling tools

Aluminium and (-2)* aluminium casting alloys *() * emulsion (long-chip) **

10,000 Series. Highlights C-6

Lubrication Fittings. 1/4"-28 Taper Thread Fittings

6000 Series. Highlights C-5. Description With torque up to 15,000 in-lb and 40 gpm continuous, this motor is packed with power operates very smoothly.

VIS 40 Series Two-speed

How to Identify Fluid Ports and Connectors

6000 Series Highlights

ORV-M45. Contents. Additional Informations

BML S K IFP BML HIGH TORQUE LOW SPEED MOTORS. Model code. Model. High Performance in an economical package

WHITE MOTORS. Features. Max Torque lb-in (Nm) Cont. Inter. *Stall

NIAGARA CUTTER THREAD MILLING THREAD MILLS

US version. Drain connection

Disc Valve Hydraulic Motors Series 6000

Specifications R & RX Lanco

SINGLE VANE PUMPS. BH*, V* and DT6/7 single vane pumps DATA SHEET

Disc Valve Hydraulic Motors

DISC VALVE HYDRAULIC MOTORS

WHITE MOTORS. Max Torque lb-in (Nm) Cont. Inter. *Stall

370/230/UNF 370/330/UNF 370/460/UNF 370/36/UNF 2 370/23/UNF 2 370/16/UNF 2 380/230/UNF 2 380/330/UNF 2 380/460/UNF 2 380/36/UNF 2 380/23/UNF 2

Our History Index 1/4" -28 Tapered Thread Fittings 1/4" NPT Fittings

Disc Valve Hydraulic Motors Series 4000

The Ultimate Solid Carbide Indexable Drill with a

Disc Valve Hydraulic Motors 4000 Compact Series

HEAVY DUTY HYDRAULIC MOTORS

IFP BMG HIGH TORQUE LOW SPEED MOTORS

CALIBRATION PRICE LIST

Hopkinsons CONTENTS SCHEDULE OF SHELL BOILER MOUNTINGS. Hopkinsons. Safety Valves 5. Boiler Stop Valves 17. Feed Check Valves 18. Blowdown Valves 20

Balfit Hydraulic Hose Fittings

Lubrication Fittings. General Information. Alemite Lubrication Fittings include:

Disc Valve Hydraulic Motors 2000 Series

7/8-14 SAE 1/2" NPT 1/2" BSP Flange Mount BMG 98 BMG 61 BMG 76

Datasheet IEC Type T Mineral Insulated Thermocouples with Threaded Pot Type T with threaded pot & tails 316 stainless steel

Valves For Cryogenic Applications

Ball Valves Gemels GE2 2-WAY HIGH PRESSURE BALL VALVES. Type and way of valve GE2 2-way high pressure ball valves

HEAVY DUTY HYDRAULIC MOTORS

INDEX METRIC SOCKET SCREWS. Page CAP HEAD SCREWS TORQUE INFORMATION 3

05. YY XX. XX. series nominal size

QuadThread. Internal. For Thread Turning

Service Data Vickers. Directional Valves. Wet Armature Solenoid Operated Directional Control Valves DG4V4-01, 1* /EN/0799/S

How to Identify Fluid Ports and Connectors

member sizes 0-6 have male point in addition to length shown in the general dimensions on page 162

VIS (Valve-In-Star) Hydraulic Motor

SERIES HYDRAULIC MOTORS

Thread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders

Kawasaki Motors Corp., U.S.A. Precision Machinery Division. Staffa Fixed Displacement Hydraulic Motor

Smart Valve Positioner for Rotary Valve

Kawasaki Motors Corp., U.S.A. Precision Machinery Division HMB 100. Staffa Fixed Displacement Hydraulic Motor

Illston & Robson Limited

VTR Series Track Roller Assembly V-Grooved Stud Type Concentric Ball & Tapered Roller Bearings

Internal Measurement. Internal Measurement C-1

ng Drilli ng eadi Thr Turni ng illi ders ol H Tool r la ders odu hol M Tool

HPC. Dual Displacement Staffa Radial Piston Motors HT 18 / C / 150 / 1007 / E HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES

SERVICE MANUAL. Coolant Level - Sight Glass. Air Cleaner Restriction Indicator

ANDERSON GREENWOOD M25/M25A/M25B/M251/M251B MANIFOLDS

Low Pressure Filters

Transcription:

ISO METRIC THREAD GAUGES 1/1/2013 STANDARDS : BASIC DIMENSIONS :- IS 4218 Part III & IV 1976 : ISO -724-1976 (E) Gauging Practice :- IS - 2334-1975 : ISO -1502-1978 (E) CLASS OF FIT : Screw Plugs :6H(Medium.) Screw Rings : 6G (medium) Applicable for Right Hand Threads. Above 8" on rerquest For non.std.dia.pitch combinations on request Screw plug Screw Ring Screw plu Screw Ring Diametr Ended Diametr Ended 2.0 0.40 800 1550 11 1.50 630 790 0.25 1350 2550 1.00 630 790 2.2 0.45 800 1550 0.75 960 1450 0.25 1350 2550 12 1.75 630 790 2.5 0.45 800 1300 1.50 630 790 0.35 1150 1850 1.25 630 790 0.75 950 1450 3.0 0.50 630 770 1.00 630 790 0.35 960 1320 14 2.00 800 1020 3.5 0.60 730 790 1.50 710 800 0.35 960 1300 1.25 710 800 4.0 0.70 630 790 1.00 710 800 0.5 960 1250 15 1.50 1100 1490 4.5 0.75 630 940 1.00 1050 1490 0.50 960 1250 16 2.00 790 1020 5.0 0.80 630 790 1.50 710 820 0.50 960 1250 1.00 710 820 0.50 960 1250 17 1.50 1100 1490 6.0 1.00 630 790 1.00 1050 1490 0.75 960 1250 18 2.50 1050 1520 7.0 1.00 630 790 2.00 900 1520 0.75 960 1250 1.50 900 1030 8.0 1.25 630 790 1.00 900 1030 1.00 630 790 20 2.50 1050 1850 0.75 960 1250 2.00 900 1550 9 1.25 630 790 1.50 900 1160 1.00 630 790 1.00 900 1160 0.75 950 1330 22 2.50 1050 1880 10.0 1.50 630 790 2.00 860 1550 1.25 630 790 1.50 890 1160 1.00 630 790 1.00 890 1160 0.75 960 1450 24 3.00 1070 2000 2.00 900 1550

PL /Dt-1/1/2013 Screw plug Screw Ring Screw plu Screw Ring Diametr Ended Diametr Ended 24 1.50 930 1250 45 4.50 2890 3650 1.00 930 1250 4.00 2650 3360 25 2.00 1050 1750 3.00 2000 2900 1.50 1050 1650 2.00 1650 2560 1.00 1050 1650 1.50 1650 2560 26 1.50 1075 1680 48 5.00 3360 3750 27 3.00 1450 2350 4.00 2650 3350 2.00 1130 1800 3.00 2000 2890 1.50 1130 1650 2.00 1650 2560 1.00 1130 1650 1.50 1650 2560 28 2.00 1130 1800 50 3.00 2000 2890 1.50 1130 1650 2.00 1650 2560 1.00 1130 1650 1.50 1650 2560 30 3.50 2330 2720 52 5.00 3550 4800 3.00 1750 2240 4.00 3550 4450 2.00 1360 2100 3.00 2450 4460 1.50 1360 2100 2.00 1890 3360 1.00 1360 2500 1.50 1890 3360 32 2.00 1360 2110 55 4.00 3550 4750 1.50 1360 2100 3.00 3450 4450 33 3.50 2330 2720 2.00 1900 3360 3.00 1800 2550 1.50 1900 3360 2.00 1360 2110 56 5.50 3530 4800 1.50 1360 2110 4.00 3530 4450 35 1.50 1360 2090 3.00 2450 4450 36 4.00 2330 2550 2.00 1890 3350 3.00 1800 2550 1.50 1890 3350 2.00 1360 2100 58 4.00 3550 4450 1.50 1360 2100 3.00 2450 4450 38 1.50 1360 2100 2.00 1890 3350 39 4.00 2330 2550 1.50 1890 3350 3.00 1800 2550 60 5.50 3490 4790 2.00 1360 2100 4.00 3490 4450 1.50 1360 2100 3.00 2390 4450 40 3.00 1790 2550 2.00 1890 3350 2.00 1360 2100 1.50 1890 3350 1.50 1360 2100 62 4.00 3490 4450 42 4.50 2900 3650 3.00 2450 4450 4.00 2650 3360 2.00 1890 3350 3.00 2000 2560 1.50 1890 3350 2.00 1650 2530 64 6.00 4350 5250 1.50 1650 2530 4.00 3550 4490 3.00 2450 4490 2.00 1890 3350 1.50 1890 3350

PL /Dt-1/1/2013 Screw plug Screw Ring Screw plu Screw Ring Diametr Ended Diametr Ended 65 4.0 3500 4450 95 6.0 6750 7550 3.0 2450 4450 4.0 5590 6750 2.0 1890 3350 3.0 4690 6150 1.5 1890 3350 2.0 2750 5150 68 6.0 4580 5260 1.50 2750 5150 4.0 4100 4450 100 6.0 6750 7550 3.0 3190 4450 4.0 5590 6750 2.0 1890 3360 3.0 4650 6100 1.5 1890 3360 2.0 2750 5200 70 6.0 4550 5250 1.5 2750 5200 4.0 4100 4450 105 6 7690 8950 3.0 3180 4450 4 6190 8350 2.0 1890 3360 3 6190 8350 1.5 1890 3360 2 4890 6650 72 6.0 4550 5250 1.5 4890 6650 4.0 4100 4450 110 6 8690 8900 3.0 3170 4450 4 6190 8300 2.0 1890 3350 3 6190 8300 1.5 1890 3350 2 4890 6650 75 4.0 4100 4450 1.5 4890 6650 3.0 3170 4450 115 6 9590 9750 2.0 1890 3350 4 6850 9190 1.5 1890 3350 3 6850 9190 76 6.0 4450 6050 2 5150 6900 4.0 4450 5150 1.5 5150 6900 3.0 3350 4850 Rs. Rs. 2.0 2200 4250 120 6 9590 9750 1.5 2200 4250 4 6850 9190 78 2.0 2200 4250 3 6850 9190 80 6.0 5450 5950 2 5190 6950 4.0 4450 5150 1.5 5190 6950 3.0 3380 4850 125 6 9690 10690 2.0 2200 4250 4 7190 9190 1.5 2200 4250 3 7190 9190 82 2.0 2190 4250 2 5450 7490 85 6.0 5450 5550 1.5 5450 7490 4.0 4450 5150 130 6 9690 10690 3.0 3350 4850 4 7190 9190 2.0 2190 4290 3 7190 9190 1.5 2190 4290 2 5450 7490 90 6.0 6750 7550 1.5 5450 7490 4.0 5590 6750 135 6 12690 11450 3.0 4690 6150 4 8190 9690 2.0 2750 5250 3 8190 9690

1.5 2750 5250 2 5590 8190 1.5 5590 8190 PL /Dt-1/1/2013 Screw plug Screw Ring Screw plu Screw Ring Diametr Ended Diametr Ended 140 6 12690 11400 170 6 15500 13500 4 8190 9690 4 10500 11900 3 8190 9690 3 10500 11900 2 6450 8190 2 8500 9900 1.5 6450 8190 1.5 8500 9900 145 6 11650 11450 175 6 15500 15550 4 8190 9650 4 10500 13000 3 8190 9650 3 10500 13000 2 6450 8190 2 8500 10500 1.5 6450 8190 1.5 8500 10500 150 6 15400 12400 180 6 18250 15250 4 9800 10400 4 13250 13000 3 9800 10400 3 13250 13000 2 7900 8690 2 10250 10500 1.5 7900 8690 1.5 10250 10500 155 6 15450 11500 185 6 18250 16000 4 9850 10400 4 13250 13250 3 9850 10400 3 13250 13250 2 7950 8650 2 10250 11500 1.5 7950 8650 1.5 10250 11500 160 6 15450 12400 190 6 18250 16000 4 9800 10400 4 13250 13250 3 9800 10400 3 13250 13250 2 7950 8650 2 10250 11500 1.5 7950 8650 1.5 10250 11500 165 6 15900 14400 195 6 21500 17750 4 10900 12400 4 14250 14800 3 10900 12400 3 15250 14800 2 8900 10400 2 12000 14800 1.5 8900 10400 1.5 12000 14800 200 6 21500 17750 4 15250 14800 3 15250 14800 2 12000 12300 1.5 12000 12300 THREAD PLUGS OTHER THAN '6H'CLASS NOTES Add 25% on the price of corresponding '6H' class Thread Plug. LEFT HAND THREAD PLUGS Add 25% on the price of THREAD RINGS OTHER THAN '6g'CLASS. corresponding RIGHT HAND thread Nom.Dia.up to 25mm, Add 30% on the price of Plug. corresponding '6g'class Thread Ring. LEFT HAND THREAD RINGS Nom.Dia.over 25mm, Add 20% on the price of Add 20% on the price of corresponding '6g'class Thread Ring. corresponding RIGHT HAND thread

Ring. UNIFIED THREAD GAUGES STANDARDS : BASIC DIMENSIONS :- BS:1580:1962 ANSI B 1-2 1983 PL /Dt-1/1/2013 Gauging Practice :-BS 919 Part 1 : 1960 CLASS OF FIT : Screw Plugs :2B(Medium.) Screw Rings :2A (Medium) Screw plug Screw Ring Norminal pitch Double Go or Screw plug Screw Ring Diametr Ended Norminal pitch Double Go or Go.& 6 g. Diametr Ended Go.& 6 g. Rs. Rs. 4 40 UNC 750 1500 Rs. Rs. 48 UNF 750 1500 7/8" 9 UNC 1470 2280 5 40 UNC 750 1500 14 UNF 960 1350 48 UNF 750 1500 20 UNEF 1320 2190 6 32 UNC 750 1090 1" 8 UNC 1500 2890 36 UNF 750 1090 12 UNF 1250 1470 1.1/16" 12 UN 1030 2090 14 UNF 1250 2350 16 UN 1030 2090 16 UN 1250 2350 18 UNEF 1750 2700 20 UNEF 1450 2350 8 32 UNC 750 1090 1.1/8" 7 UNC 2190 3590 36 UNF 750 1090 12 UNF 1350 2090 10 24 UNC 690 1090 16 UN 1350 2090 32 UNF 690 1090 18 UNEF 1750 2750 12 24 UNC 690 1190 1.1/4" 7 UNC 2190 3590 28 UNF 690 1190 8 UNC 2100 3250 32 UNEF 950 2150 12 UNF 1450 2420 1.3/16" 12 UN 1190 2600 16 UN 1450 2420 16 UN 1190 2600 18 UNEF 1750 2730 1/4" 20 UNC 690 1050 20 UN 1750 2730 28 UNF 690 1050 1.3/8" 6 UNC 2700 4500 32 UNEF 970 1320 8 UN 2090 3230 5/16" 18 UNC 690 1050 12 UNF 1450 2420 24 UNF 690 1050 16 UN 1450 2420 32 UNEF 990 2150 18 UNEF 1990 2730 3/8" 16 UNC 690 1050 20 UN 1990 2730 24 UNF 690 1050 1.1/2" 6 UNC 2700 3720 32 UNEF 990 2150 8 UN 2100 2920 7/16" 14 UNC 690 1050 12 UNF 1490 2380 20 UNF 690 1050 16 UN 1490 2380 1/2" 13 UNC 690 1050 18 UNEF 1990 2750 20 UNF 760 1090 20 UN 1990 2750 28 UNEF 990 2140 1.5/8" 8 UN 2500 3490 9/16" 12 UNC 850 1390 12 UN 1850 2380 18 UNF 850 1390 16 UN 1850 2380 20 UN 1250 2800 18 UNEF 2250 3100 24 UNEF 1250 2800 20 UN 2250 3100 5/8" 11 UNC 850 1310 1.3/4" 5 UNC 3890 6290

18 UNF 850 1050 8 UN 2500 3690 20 UN 1250 2790 12 UN 1850 2700 24 UNEF 1250 2790 16 UN 1850 2700 1.7/16" 8 UN 2090 3230 20 UN 2250 3090 12 UNC 1450 2440 1. 9/16" 8 UN 2490 3690 16 UN 1450 2440 12 UN 1850 2710 18 UNEF 2000 2730 16 UN 1850 2710 20 UN 2000 2730 18 UNEF 2230 3090 3/4" 10 UNC 1290 1990 20 UN 2230 3090 16 UNF 970 1350 13/16" 16 UN 1250 2350 20 UNEF 1330 2200 20 UNEF 1250 2800 11/16" 16 UN 1250 2350 1.7/8" 8 UN 2500 3690 20 UN 1250 2800 12 UN 1850 2850 24 UNEF 1250 2800 16 UN 1850 2850 15/16" 16 UN 1250 2350 20 UN 2250 3090 20 UNEF 1250 2800 2" 4.5 UNC 3900 6290 8 UN 2490 3990 12 UN 1850 2790 16 UN 1850 2790 20 UN 2230 3090 Screw plug Screw Ring Norminal pitch Double Go or PL /Dt-1/1/2013 Diametr Ended Go.& 6 g. Screw plu Screw Ring Normina pitch Double Go or Diametr Ended Rs. Rs. Go.& 6 g. 2.1/4" 4.5 UNC 4490 6850 8 UN 2890 4850 12 UN 2200 3390 Rs. Rs. 16 UN 2200 3390 3.1/2" 4 UNC 6750 10000 2.3/8" 8 UN 2800 4800 8 UN 4500 7000 12 UN 2200 3690 12 UN 3470 5900 16 UN 2200 3690 16 UN 3470 5900 2.1/2" 4 UNC 4500 6850 3.3/4" 4 UNC 6500 10000 8 UN 2900 4850 8 UN 4400 7000 12 UN 2190 3690 12 UN 3450 5900 16 UN 2190 3690 16 UN 3450 5900 2.5/8" 8 UNC 2890 4850 4" 4 UNC 6750 10000 12 UN 2200 3680 8 UN 4450 7000 16 UN 2200 3680 12 UN 3450 5900 2.3/4" 4 UNC 4490 6850 16 UN 3450 5900 8 UN 2890 4850 5" 4 UNC 8100 11000 12 UN 2200 3690 8 UN 7700 9000 16 UN 2200 3690 12 UN 7000 7500 2.7/8" 8 UN 2880 4400 16 UN 6000 7500 12 UN 2200 3690 6" 4 UNC 11000 11000 16 UN 2200 3690 8 UN 10900 10000 3" 4 UNC 5650 7990 12 UN 8000 8000 8 UN 3690 6250 16 UN 7500 8000 12 UN 2850 4750 7" 4 UNC 14500 11900 16 UN 2850 4750 8 UN 13400 10400 3.1/4" 4 UNC 5650 8050 12 UN 10200 10800

8 UN 3690 6200 16 UN 10200 10800 12 UN 2800 4750 8" 4 UNC 17000 14500 16 UN 2800 4750 8 UN 14800 13500 12 UN 12000 11600 THREAD PLUGS OTHER THAN '2B'CLASS 16 UN 10000 11600 Add 20% on the price of corresponding '2B' class Thread Plug. LEFT HAND THREAD PLUGS Add 25% on the price of THREAD RINGS OTHER THAN '2A'CLASS. corresponding RIGHT HAND thread Nom.Dia.up to 1" Add 30% on the price of NOTES plug corresponding '2A'class Thread Ring. LEFT HAND THREAD RINGS Nom.Dia.over 1" Add 20% on the price of Add 20% on the price of corresponding '2A'class Thread Ring. corresponding RIGHT HAND thread ring BSW- BSF THREAD GAUGES STANDARDS : BASIC DIMENSIONS :- BS:84:1962 Gauging Practice :-BS 919 Part 2 : 1971 CLASS OF FIT : Screw Plugs :(Medium.) Screw Rings :(Medium) PRICES : Applicable for Right Hand Threads. Above 1.1/2" on request. For non- std. dia-pitch combinations on request Screw plug Screw Ring Screw plug Screw Ring Norminal pitch Double Go or Norminal pitch Double Go or Diameter Ended Diameter Ended 1/8" 40 BSW 2200 3850 5/8" 11 BSW 1390 3050 3/16" 24 BSW 1600 2590 14 BSF 1390 2530 32 BSF 1700 3850 3/4" 10 BSW 2350 5550 1/4" 20 BSW 1390 2490 12 BSF 1390 4200 26 BSF 1390 2490 7/8" 9 BSW 2300 5590 5/16" 18 BSW 1390 2490 11 BSF 1390 4190 22 BSF 1390 2490 1" 8 BSW 2900 4800 3/8" 16 BSW 1390 2490 10 BSF 2400 4800 20 BSF 1390 2490 1.1/8" 7 BSW 3810 4950 7/16" 14 BSW 1390 2490 9 BSF 2990 4200 18 BSF 1390 2490 1.1/4" 7 BSW 4390 4950 1/2" 12 BSW 1390 2490 9 BSF 3450 4200 16 BSF 1390 2490 1.1/2" 6 BSW 4200 4900 8 BSF 3450 4200 B.S.CYCLE THREAD GAUGES STANDARDS : BASIC DIMENSIONS :- BS811:1950 Gauging Practice :- BS 919 Part 2 : 1971 T.P.I PLUG RING T.P.I PLUG RING 1/8" 40 1880 2440 1/2" 26 1850 2300 5/32" 32 1370 2440 9/16" 26 1850 2800 3/16" 32 1370 2440 5/8" 26 1850 2900

7/32" 26 1550 2300 11/16" 26 1900 2900 1/4" 26 1550 2300 3/4" 26 2150 2900 9/32" 26 1550 2300 1" 26 150 3190 5/16" 26 1550 2300 1/4" 26 1600 2710 3/8" 26 1850 2490 1.1/2" 26 2100 3300 7/16" 26 1850 2550 1" 24 1680 2980 1.370" 24 RH 1090 3850 THREAD PLUGS OTHER THAN '2B'CLASS LEFT HAND THREAD PLUGS Add 20% on the price of corresponding Add 25% on the price of '2B' class Thread Plug. corresponding RIGHT HAND thread plug THREAD RINGS OTHER THAN '2A'CLASS. LEFT HAND THREAD RINGS Nom.Dia.up to 1" Add 30% on the price of NOTES Add 20% on the price of corresponding '2A'class Thread Ring. corresponding RIGHT HAND thread Nom.Dia.over 1" Add 20% on the price of corresponding '2A'class Thread Ring. G- Series (Formerly BSP-F) THREAD GAUGEring STANDARDS : BASIC DIMENSIONS:- BS 2779 :1973 IS :243-1975 ISO 228(PT.I-1982 (E) Gauging Practice :-BS 919 Part 2 : 1971 IS : 10216-1982 ISOPL /Dt-1/1/2013 CLASS OF FIT : Screw Plugs :General,Screw rings :General (B), Close (A) PRICES : Applicable for Right Hand Threads. Note : Rings are supplied to class 'B' unless class 'A' is specially requested Screw plug Screw Ring Screw plu Screw Ring Diameter Ended Diameter Ended G 1/16" 28 2650 3750 G 1.1/4" 11 1650 3300 G 1/8" 28 950 1900 G 1.3/8" 11 1650 3300 G 1/4" 19 950 1900 G 1.1/2" 11 1650 3300 G 3/8" 19 950 1900 G 2" 11 2100 4250 G 1/2" 14 1150 2850 G 2.1/2" 11 2450 4430 G 5/8" 14 1150 2850 G 3" 11 2990 6500 G 3/4" 14 1150 2850 G 4" 11 3690 7200 G 7/8" 14 1150 2850 G 5" 11 5590 9500 G 1" 11 1750 3350 G 6" 11 8390 11500 G 1.1/8" 11 1940 3350 NGT TAPER THREAD GAUGES STANDARDS : BASIC DIMENSIONS & GAUGES PTACTICE TO IS : 9121 :1979 PRICES : For Right Hand Threads only. Note : Calibration Certificate will be issued with each Gauge

PLUG RING Nominal Threads Gauge Gauge Gauge Gauge Diameter Per inch B(L1) A(L9) E(L1) D(L8) 3/4" 14 1590 1690 2850 3170 NPT TAPER THREAD GAUGES STANDARDS :BASIC DIMENSIONS & GAUGES PTACTICES : ANSI/ASME B 1 20.2-1983 : NBS H-28 PPL /Dt-1/1/2013 CLASS OF FIT : Basic/ Step Limit Note : Calibration Certificate will be issued with each Gauges PLUG RING L1 L1 L1 L1 TPI BASIC Min/Basic/M BASIC Min/Basic/Max 1/16" 27 2100 2200 3650 4300 1/8" 27 2100 2200 3650 4300 1/4" 18 1650 1900 3250 3800 3/8" 18 1650 1900 3490 3800 1/2" 14 1650 1900 3490 3800 3/4" 14 1650 1900 3490 3800 1" 11.1/2" 2050 2300 4100 4900 1.1/4" 11.1/2" 2050 2300 4100 4900 1.1/2" 11.1/2" 2050 2300 4100 4900 2" 11.1/2" 2050 2300 4100 4900 2.1/2" 8 3300 3650 5100 6100 3" 8 3300 3650 5100 6100 3.1/2" 8 3300 3650 5100 6100 4" 8 5050 5400 8200 9100 4.1/2" 8 5050 5400 8200 9100 5" 8 5500 6000 8200 9100 6" 8 5500 6000 8200 9100 8" 8 6000 8500 12900 16200 Note:For NPTF Taper thread Gauges add 20% R/RC TAPER THREAD GAUGES STANDARDS : BASIC DIMENSIONS :- BS 21 :1985 IS : 243-1975 IS: 243-1975 Gauging Practice :- BS 21 : 1985 CLASS OF FIT : Screw plugs : System B, Screw Rings : System B PRICES : For Right Hand Threads only. PL /Dt-1/1/2013 For System A on request. NOTE : Calibration Certificate will be issued with each Gauges

Screw plug Screw Ring Screw plu Screw Ring Diameter Ended Diameter Ended R 1/6" 26 3200 5800 R1.1/2" 11 2850 6850 R1/8" 28 3200 5800 R2" 11 2850 6850 R1/4" 19 2350 5500 R2.1/2" 11 4350 7350 R1/2" 14 2350 4500 R3" 11 4350 7350 R3/4" 14 2350 4550 R4" 11 6440 12300 R1 11 2850 6850 R5" 11 7800 14300 R1.1/4" 11 2850 6850 R6" 11 7800 14300 CERTIFICATE OF CALIBRATION CHARGES PARTICULARS RANGE RANGE RANGE RANGE UPTO 20MM 21MM TO 40 MM 1.5/8"TO4" ABOVE 4" TO ' UPTO 3/4" ABOVE 3/4"TO 41 TO 100MM 101 MM TO 1.1/2" 150MM PARALLEL,D/E THREAD PLUG RS.300 RS.300 RS.350 RS.510 THREAD RING GO OR NOT GO RS.350 RS.450 RS.560 RS.1000 TAPER, TAPER THREAD PLUG RS.380 RS.450 RS.560 RS.920 TAPER, TAPER RING RS.600 RS.760 RS.960 RS.1400 Note:- Gauges are calibrated in an air -conitioned Standards Room maintained at 20c +1 C. Gauge above 6" on request.

2024 © autodocbox.com Privacy Policy | Terms of Service | Feedback