IMPORTANT MANUAL Do Not Throw Away ILLUSTRATED S LIST MODEL NUMBER: XT0ES SNOW THROWER WARNING: Read the Owner's Manual and fol low all Warnings and Safety In struc tions. Fail ure to do so can result in serious injury. Always Wear Eye Protection During Operation 88 0.0.0 SR Printed in the U.S.A.
SERVICE NOTES
REPAIR S SNOW THROWER - MODEL XT0ES (000) AUGER HOUSING / IMPELLER ASSEMBLY 0 8 0 8 0 8 (EXPLODED) 0.0.0-C NOTE: All component dimensions given in U.S. inches. inch =. mm
REPAIR S SNOW THROWER - MODEL XT0ES (000) AUGER HOUSING / IMPELLER ASSEMBLY DESCRIPTION X IMPELLER 8 GEARBOX ASSEMBLY 880 BEARING IMPELLER PULLEY DISCHARGE BASE 8X008 CORNER BRACKET CLEAN OUT TOOL 8 000 TOOL CLIP 80000 NUT /-0 0 80 SCREW /-0 X. NUT /-8 8 SCREW /-8 X. IMPELLER HUB IMPELLER SLEEVE 0000 NUT /8-80 CARRIAGE BOLT 8 SCREW - X. 8 00 PLUG 0 GEARBOX COVER RH 0 GASKET 00 SEAL 0 BEARING THRUST WASHER.00 0 WORM GEAR 0 AUGER SHAFT 88 SQUARE 08 BEARING 8 8 THRUST WASHER IMPELLER SHAFT 0 8M ROLL PIN 8 THRUST WASHER 8 THRUST BEARING 0 BEARING 08 O-RING 0 SCREW /-8 X.0 GEARBOX COVER LH 00 SHEAR BOLT NOTE: All component dimensions given in U.S. inches. inch =. mm
REPAIR S SNOW THROWER - MODEL XT0ES (000) AUGER HOUSING / IMPELLER ASSEMBLY (x) (x) DESCRIPTION 00X0 AUGER HOUSING 0X SCRAPPER BAR 00 CARRIAGE BOLT / 8 X. NUT / 8 0.0.00-A DESCRIPTION 0X AUGER ASSEMBLY 0 LH 08X AUGER ASSEMBLY 0 RH 0.0.0-A NOTE: All component dimensions given in U.S. inches. inch =. mm
REPAIR S SNOW THROWER - MODEL XT0ES (000) AUGER HOUSING / IMPELLER ASSEMBLY 0.0.0-B DESCRIPTION 08 AUGER BEARING BEARING PLUG 8 SCREW / 8 X.00 DESCRIPTION X SKID PLATE LH 8X SKID PLATE RH 00 CARRIAGE BOLT / 8 X. NUT / 8 0..00-A NOTE: All component dimensions given in U.S. inches. inch =. mm
REPAIR S SNOW THROWER - MODEL XT0ES (000) CONTROL PANEL / DISCHARGE CHUTE * * DESCRIPTION 0X0 CHUTE WELDMENT 8X0 DEFLECTOR WELDMENT 0 DEFLECTOR CONTROL ASSEMBLY 0 DEFLECTOR SEAL 80 KNOB BLACK 8 POP RIVET 000 SCREW 0- X. *8 8 SHOULDER SCREW * 0 NUT /-0 *0 00 CARRIAGE BOLT /-8 X.0 * NUT /-8 * 80 DEFLECTOR SPRING 0 DEFLECTOR CONTROL HEAD 0 DEFLECTOR CONTROL CABLE *8 * *0 0.0.00-D NOTE:. ALL ITEMS INDICATED WITH AN * ARE PROVIDED IN THE BAG OF ITEMS SHIPPED LOOSE WITH PRODUCT.. ITEMS AND ARE SERVICE NUMBERS TO ALLOW PURCHASE OF INDIVIDUAL ITEMS IF NECESSARY. NOTE: All component dimensions given in U.S. inches. inch =. mm
REPAIR S SNOW THROWER - MODEL XT0ES (000) CONTROL PANEL / DISCHARGE CHUTE * * * DESCRIPTION 8 LEVER/CABLE ROTATOR ASSEMBLY 000 SCREW 0- X. * 08 ROTATOR HEAD * 0 ROTATOR PIVOT BRACKET * 0 PULLEY PIVOT * 8 CABLE ASSEMBLY ADJUSTABLE * 80 CABLE ASSEMBLY HEAT SHIELD * 0.0.00-B * NOTES:. ITEMS INDICATED WITH AN * ARE LISTED AS REFERENCE FOR SERVICE S ONLY. DESCRIPTION STEER CABLE 00 SCREW 0 X.0 0..00-A NOTE: All component dimensions given in U.S. inches. inch =. mm
REPAIR S SNOW THROWER - MODEL XT0ES (000) HANDLES DESCRIPTION 8X LOOP HANDLE LH X LOOP HANDLE RH 80 SCREW / 8 X.0 NUT / 8 0.08.00-B DESCRIPTION X LOWER TUBE 8X PIVOT SUPPORT 88 BOLT /-8 X.0 000 SCREW /8- X.00 0.0.00-C NOTE: All component dimensions given in U.S. inches. inch =. mm 8
REPAIR S SNOW THROWER - MODEL XT0ES (000) HANDLES 0 0 8 DESCRIPTION 8080 IMPELLER ROD 00 TRACTION ROD 80 SHIFTER ROD TOP 8 SHIFTER ROD BOTTOM 80 SPRING SLEEVE 8 IMPELLER SPRING 80 TRACTION SPRING 8 00 CARRIAGE BOLT /-8 X. NUT /-8 0 RETAINER 0 0..00-E NOTE: All component dimensions given in U.S. inches. inch =. mm
REPAIR S SNOW THROWER - MODEL XT0ES (000) HANDLES 0 8 8 0.08.00-F DESCRIPTION 8X CONTROL PANEL X CONTROL LEVER LH X CONTROL LEVER RH X008 TRACTION ROD ARM 8X008 IMPELLER ROD ARM INTERLOCK BAIL SPACER 8 RETAINER 000 SCREW /-0 X. 0 80 KNOB BLACK 8 KNOB RED 88 HANDLE KNOB WASHER /8 08 CARRIAGE BOLT /8- X. NOTE: All component dimensions given in U.S. inches. inch =. mm 0
REPAIR S SNOW THROWER - MODEL XT0ES (000) HANDLES DESCRIPTION X00 INTERLOCK SPRING INTERLOCK CAM 88 TORSION SPRING RETAINER 000 SCREW / 0 X. X00 INTERLOCK STOP 0.08.00-B DESCRIPTION 80 CONSOLE PANEL 88 HEADLIGHT BEZEL 80 FLOOD HEADLIGHT 8 SHOULDER SCREW 0 X. SCREW 0 X. 80 WIRE HARNESS 88 BULB 0.0.00-B NOTE: All component dimensions given in U.S. inches. inch =. mm
REPAIR S SNOW THROWER - MODEL XT0ES (000) DRIVE EXPLODED 8 0 8 0 8 0 8 0 8 0 0.0.0-A NOTE: All component dimensions given in U.S. inches. inch =. mm
REPAIR S SNOW THROWER - MODEL XT0ES (000) DRIVE DESCRIPTION 88 SPEED SELECTOR ASSEMBLY 000 SCREW 0- X. 08X0 END PLATE 008 SCREW /-8 X.0 0 WASHER 08 CONTROL ARM 880 CLEVIS PIN 8 00X00 SHIFTER PLATE 088 SHOULDER BOLT 0 00X00 SHIFTER BRACKET 0 NUT /-0 08X00 CLUTCH PLATE X00 CLUTCH BRACKET 80 SHIFTER LINK 00 RETAINER CONTROL SHAFT 08 CLUTCH ROD 8 RETAINER 0 SHIFTER YOKE 0 00 PIVOT ROD 0000 RETAINER 088 RETURN SPRING NUT /-8 088 BEARING 000 NUT /-8 8X RUBBER WHEEL PLATE DESCRIPTION 8 RUBBER RING 8 BEARING 8 WHEEL HUB 0 0 SCREW /-8-.8 0000 RETAINER RING 08 SPROCKET SHAFT 0 CHAIN SPROCKET WELDMENT 08X SHIFTER BRACKET 80 SPRING 0 PLATE PIVOT ROD 8 888 E-RING. 8 SHOULDER SCREW 0 08 BOTTOM PAN X SPRING BRACKET 08 DRIVE PLATE ASSEMBLY IDLER SPRING 888 IDLER SPRING 00X008 PULLEY SHAFT 080 DRIVE PLATE 8 BEARING 8 0 PULLEY HALF 008 SCREW 0- X.0 0 0 SPACER BEARING 88X SWING PLATE 00 NUT /8-88 SCREW /-8 X.0 NOTE: All component dimensions given in U.S. inches. inch =. mm
REPAIR S SNOW THROWER - MODEL XT0ES (000) DRIVE 8 b b a 0.0.00-A DESCRIPTION 0 AXLE ASSEMBLY (assy of a,b) a 00 AXLE SHAFT b M ROLL PIN / X.0 0 SPROCKET THRUST WASHER 80 BEARING SCREW / 8 X. 008 SCREW / 8 X.00 KLIK PIN / X.0 8 88 SQUARE NOTE: All component dimensions given in U.S. inches. inch =. mm
REPAIR S SNOW THROWER - MODEL XT0ES (000) CHASSIS / ENGINE / PULLEYS 0.00.0-A DESCRIPTION - - - - - - - - B&S ENGINE MODEL C-80-E8 8X0 FRAME 00 BOLT /8-88 SCREW /-8 X.0 DESCRIPTION 8X0 ENGINE MOUNTING PLATE 0.0.00-A NOTE: All component dimensions given in U.S. inches. inch =. mm
REPAIR S SNOW THROWER - MODEL XT0ES (000) CHASSIS / ENGINE / PULLEYS 0 0 0 8 0..00-B 8 DESCRIPTION 0800 IMPELLER BELT TRACTION BELT X IDLER ARM BRACKET 80 IDLER PULLEY 8 NUT /-8 80 SCREW /-8 X.0 0X IDLER BRACKET 8 88 SCREW /-8 X. SHOULDER BOLT /-8 X.00 0 NUT /-8 NYLOCK 88 TRACTION IDLER ARM 80 TRACTION PULLEY 800 SCREW /-8 X.00 8 WASHER 80000 NUT /-8 808 SCREW /8- X. 000 WASHER 8 PULLEY ENG IMPELLER 0 PULLEY ENG TRACTION 0 0 SCREW /-8 X.00 00000 LOCKWASHER / BELT GUIDE 0000 LOCKWASHER / IDLER BUSHING DESCRIPTION 88 COVER ASSEMBLY 0..0-B NOTE: All component dimensions given in U.S. inches. inch =. mm
REPAIR S SNOW THROWER - MODEL XT0ES (000) WHEELS 0..00-A 0 8 0 8 8 0 0 8 DESCRIPTION 0 COVER 8 SHOULDER SCREW 0000 RETAINER RING WHEEL DRIVER 8 RETAINER RING 8 WHEEL LOBE CLUTCH SLIDE 8 SPRING 88 SQUARE 0 0 AXLE LOBE THRUST WASHER 0X STEERING YOKE 8X STEERING BRACKET 008 SCREW / 8 X.0 X008 PIVOT BRACKET X008 BELLCRANK 88 BELLCRANK PIN 8 000 SCREW / 0 X. 00 STEERING LINK 0 00 RETAINER 8 RETAINER 88 SPRING 80 LEVER PIN X008 PIVOT BRACKET DESCRIPTION 0 CABLE BRACKET LH 0 CABLE BRACKET RH 000 SCREW / 0 X. 0..00-A NOTE: All component dimensions given in U.S. inches. inch =. mm
REPAIR S SNOW THROWER - MODEL XT0ES (000) WHEELS DESCRIPTION 0X8 WHEEL X.80 X LH 0X8 WHEEL X.80 X RH 0.0.00-A NOTE: All component dimensions given in U.S. inches. inch =. mm 8
REPAIR S SNOW THROWER - MODEL XT0ES (000) BAG OF S 8 0 DESCRIPTION 8 POWER CORD RETAINER PIN 808X008 WRENCH 80 REMOTE SPRING 8 SHOULDER BOLT /-0 0 LOCKNUT /-0 00 CARRIAGE BOLT /-8 X /8 8 LOCKNUT /-8 80000 LOCKNUT /8-0 WASHER /8 00 SHEAR BOLT /-0 X -/ 80000 LOCKNUT /-0 0..00-B 0..00-A DESCRIPTION 0 SAFETY IGNITION. 0..0-A DESCRIPTION 80 SHIFTER ROD TOP 8 SHIFTER ROD BOTTOM 00 CARRIAGE BOLT /-8 X. NUT /-8 NOTE: All component dimensions given in U.S. inches. inch =. mm
REPAIR S SNOW THROWER - MODEL XT0ES (000) DECALS 0 DESCRIPTION 80 DECAL, DANGER 80 DECAL, DANGER, DEFLECTOR 80 DECAL, DANGER 80 DECAL, INSTRUC. DECAL, REMOTE DEFLEC. CONTROL 0 80 DECAL, REMOTE DEFECTOR CONTROL DECAL, TRIGGER LH 8 DECAL, TRIGGER RH - - 88 OWNER S MANUAL, ENGLISH - - 88 OWNER S MANUAL, FRENCH NOTE: All component dimensions given in U.S. inches. inch =. mm 0