Where there s sun Where there s SUNGEN 1 2 www.sungen.com
SUNGEN Module Features Amorphous Silicon Solar Module Monocrystalline Solar Module Modules engineered for greater sustained high energy yields in real world conditions. Optimum module performance is a product of tight power tolerance of -1%~+3%. Manufactured under peerless quality control in ISO 9001 certified production base in China. Safely rated to withstand high winds, hail impact, snow load and fire according to international standards. Long term durability guaranteed by precision construction, encapsulation, and premium cell grade. Rigid anodized aluminum frame with high load resistance. Integrated bypass diodes mitigate shading and hot spot occurrences. 5 Polycrystalline Solar Module Amorphous Silicon Solar Module www.sungen.com
Superior Performance under High-Temperature Conditions Performs Well in Diffused Sunlight and in Lower Light Intensity Why Thin Film? Superior Performance under High-Temperature Conditions, eg. in desert and plateau, etc. Performs Well in Diffused Sunlight and in Lower Light Intensity, eg. cloudy/foggy weathers, dawn, dusk, etc. Better Energy Output-kWh/kW over its counterparts. Independence from Shortages of Silicon Supply Cost Reduction Potential due to the Monolithic Production Nature Shorter Energy Payback Time (EPT) Generate More Electricity Substrates can be Flexible or Rigid, and be Semi-Transparent and BIPV Ready Energy Pay-back Time (Year) 3 2 1 0 10 EPT(Energy Pay-back Time) 2.2 Years 1.6 Years Thin-film Amorphous Silicon Poly Crystalline Silicon EPT=Eo/Eg Eo: Energy for Manufacturing PV Eg: Generated Power by PV for One Year 30 50 100 Production Capacity(MW per Year) KWh/Kwp.year Generate Electricity Comparison 1250 1200 1150 1100 1050 1000 950 Mono-crystalline silicon Poly-crystalline silicon Amorphous silicon 7 8 www.sungen.com
9 www.sungen.com
Amorphous Silicon Solar Modules SUNGEN SG-NH-GS Series 80W/85W/90W/100W Amorphous Silicon Solar Modules SUNGEN SG-NH-GS Series 80W/85W/90W/100W Specifications Characteristic Curves(SG-NH95-GS) Please note the graphs above will have a tolerance. SUNGEN reserves the rights to modify these specifications and warranties without notice.
Monocrystalline Solar Modules SUNGEN SGM-D Series 160W/165W/170W/175W/180W Monocrystalline Solar Modules SUNGEN SGM-D Series 160W/165W/170W/175W/180W Characteristics Characteristic Curves(SGM-180D) Specifications Please note the graphs above will have a tolerance. SUNGEN reserves the rights to modify these specifications and warranties without notice.
Polycrystalline Solar Modules SUNGEN SGM-P Series 200W/210W/220W/230W Polycrystalline Solar Modules SUNGEN SGM-P Series 200W/210W/220W/230W Characteristics Characteristic Curves(SGM-220P) Specifications Please note the graphs above will have a tolerance. SUNGEN reserves the rights to modify these specifications and warranties without notice.
Polycrystalline Solar Modules SUNGEN SGM-P Series 240W/250W/260W/270W/280W Polycrystalline Solar Modules SUNGEN SGM-P Series 240W/250W/260W/270W/280W 978.5(38.5) 990(39.0) 900(35.4) 990(39.0) 990(39.0) Characteristics Model SGM-240P SGM-250P SGM-260P SGM-270P SGM-280P Max-power Voltage (Vmp) Max-power Current (Imp) Open-circuit Voltage (Voc) Short-circuit Current (Isc) Max-power (Pm) Temperature Coefficient of Pm Temperature Coefficient of Voc Temperature Coefficient of Isc NOCT Operating Temperature Maximum System Voltage Specifications Cell Tolerance NO.of cells 156mm 156mm (6.14inches 6.14inches) -1%~+3% 72 (12 6) 34.40V 34.60V 34.70V 35.20V 35.30V 6.98A 7.23A 7.49A 7.67A 7.93A 42.66V 42.90V 43.03V 43.65V 43.77A 8.27A 8.57A 8.51A 8.59A 8.76A 240W 250W 260W 270W 280W -0.45%/K -0.35%/K 0.05%/K 48 C+/-2 C -40 C ~ +85 C 1000V(IEC)/600V (UL) Dimension of Module Weight Packing 1957mm 990mm 50mm (77.0inches 38.9inches 1.97inches) 25.0 Kg (55.6 Ibs) 396 Pcs/40ft Container 1957(77.0) Characteristic Curves Current(A) 1 0 9 8 7 6 5 4 3 2 1 0 IV Curve 0 5 1 0 1 5 2 0 2 5 3 0 3 5 4 0 4 5 5 0 Voltage(V) 50 C 25 C IRRADIANCE: AM 1.5,1000w/m 2 Current/voltage characteristics wiht dependence on irradiance and module temperature Please note the graphs above will have a tolerance. SUNGEN reserves the rights to modify these specifications and warranties without notice. 0 C Normalize Isc, Voc and Pmax(%) 100 80 60 40 20 247(9.7) 371(14.6) 721(28.4) Temperature dependence of Isc, Voc and Pmax (cell temperature:25 C) Voc ISC Pmax 0 0 200 400 600 800 1000 Irradiance(W/m 2 ) 1957(77.0) Normalize Isc, Voc and Pmax(%) 120 100 80 60 40 20 940(37.0) 371(14.6) 35(1.4) 247(9.7) 50(1.97) Temperature dependence of Isc, Voc and Pmax ISC Voc Pmax 0-25 0 25 50 75 100 Module Temperature( C)
Amorphous Solar Modules SUNGEN SG-NH-GS Series Portable Solar Power System SG-NH90-GS DC/AC Solar Power System SUNGEN provides various sizes of amorphous solar modules. System Configuration 1 pc amorphous thin film panel: power 90W, output voltage 69.7V, current 1.29A. Dimensions: 1108x1408x40mm. 1 set of mounting structure. Portable power management unit: 6A charging controller, 600W inverter, DC & AC output ports; 24V/50Ah battery is recommended as back-up. System Application Model SG-NH5-GS SG-NH10-GS SG-NH15-GS SG-NH18-GS SG-NH20-GS SG-NH36-GS SG-NH40-GS The system can supply power for energy-saving lamp, DC LCD or 14''-21'' CRT TV, radio, electrical fan, mobile phone and so on. Pm(W) 5 10 15 18 20 36 40 Voc(V) 28 22 22 27 28 59 61 SG-NH80-GS DC Solar Power System Isc(A) 0.25 0.57 0.85 1.4 1.45 1.0 1.0 System Configuration: Vmp(V) Module Weight(kg) Module Dimension(mm) (LxWxD) 22 17.5 17.5 17.6 18.5 44 46 2 5 5 7.5 7.5 15 15 315x1245x7 315x923x22 315x923x22 1225x355x27 1225x355x27 640x1250x38 640x1250x38 1 pc amorphous thin filmpanel: power 80W, output voltage 68V, current 1.18A. Dimensions: 1108x1408x40mm. Portable cart. Power unit: 6A charging controller, 24V/50Ah battery is recommended as back-up. System Application The system can supply power for energy-saving lamps, DC LCD TV, radio, electrical fan, mobile phone and so on.
Monocrystalline Solar Modules SUNGEN SGM-D Series Polycrystalline Solar Modules SUNGEN SGM-P Series SUNGEN provides various sizes of monocrystalline solar modules. SUNGEN provides various sizes of polycrystalline solar modules. Model SGM-5D SGM-10D SGM-20D SGM-40D SGM-60D SGM-70D SGM-95D SGM-100D SGM-150D Model SGM-10P SGM-20P SGM-30P SGM-40P SGM-50P SGM-70P SGM-100P SGM-120P SGM-140P Pm(W) Vmp(V) Imp(A) Voc(V) Isc(A) Module Dimension(mm) (LxWxD) Module Weight(kg) Cells (pcs) Warranty Program 5 217x307x25 1 36 10 369x311x25 2 20 445x296x25 2.5 40 632x550x30 4.5 36 36 36 60 17.6 17.6 17.2 17.2 18.0 17.0 17.8 18 17.8 0.28 0.57 820x550x30 5.5 70 1.16 2.33 3.33 4.12 5.33.56 8.42 21.8 21.8 21.4 21.4 22.5 21.2 22.2 22.4 22.2 0.31 0.62 1.25 2.50 3.55 4.59 5.79 5.88 8.88 2 Years product warranty 5 Years warranty for 90% of rated power 8 Years warranty for 80% of rated power 1195x550x30 8 95 1195x550x30 72 36 36 8 100 1024x674x30 12 72 150 1474x674x35 12 36 5 Years product warranty 10 Years warranty for 90% of rated power 25 Years warranty for 80% of rated power Pm(W) Vmp(V) Imp(A) Voc(V) Module Dimension(mm) (LxWxD) Module Weight(kg) Cells (pcs) Warranty Program 10 1.9 36 20 30 40 50 70 100 120 140 17.2 17.2 17.8 17.6 17.4 17.8 17.4 17.2 17.6 0.58 1.16 1.97 2.56 2.87 3.93 5.75 6.98 7.95 21.8 21.8 22.4 22.2 22.0 22.4 22.0 21.6 22.1 Isc(A) 0.65 1.29 2.08 2.74 3.16 4.17 6.31 7.70 8.1 311 369 25 362 538 25 421 674 30 538 674 30 632 674 30 772 674 30 1195 674 30 1474 674 35 1474 674 35 3.4 4.1 5.2 6.1 6 10 12 12 36 36 36 36 36 36 36 36 2 Years product warranty 5 Years warranty for 90% of rated power 8 Years warranty for 80% of rated power 5 Years product warranty 10 Years warranty for 90% of rated power 25 Years warranty for 80% of rated power
Solar Lighting System Solar Charging Kit This system is specially designed for basic lighting in remote areas where grid is not available or cost of interconnection is unaffordable. It can be easily installed and used at garage, granary, balconies, docks and other places. SG-F80M This kit is specifically designed for continuously powering a RV refrigerator or other appliances. Being compact and foldable, it is easy for storage and transportation. Features: 40W mono/poly solar panel, 2pcs. SG-L5 System Configuration: 1 x 5W/12V polycrystalline solar panel. 4 x 12 super bright LEDs light. 1 x control box including one 5Ah 12V battery. 1 set of cables & connectors. Environment-friendly products. Aluminum frame, robust and durable. Foldable racking. Built-in intelligent solar controller. 5m extension charging cable, standard cigarette lighter. Product Information: Features a 12V charging controller with over-charging and over-discharging protection. Plug&Play design for easy operation. Lighting hours: The system can provide lighting in full load condition for four hours per night for three consecutive rainy days.
Solar Pumping System Introduction Solar Pumping System Specification Stand-alone solar pumping system consists of inverters, pumps and solar modules. The system can be used for agricultural and forestry irrigation, desert control, and pasture animal husbandry, water supply for islands, wastewater treatment engineering, and so on. Instead of using battery to store energy, SUNGEN solar pumping system store water to drive the pump directly instead of using electricity. It improves the reliability of the device, and at the same time dramatically lowers the construction and maintenance costs of the system. Solar array Pumping inverter Pump The system configuration will be provided according to the system mode, local geographic and climate conditions. Model Submersible Pump Rated Power(kW) Rated Voltage(V) Head(m) Capacity(m 3 /h) Inverter Rated Power Solar Array Peak Power(kW) SG-PI370 0.37 220 14-58 3.6-1 0.4 0.6 SG-PI550 0.55 220 13-80 9-1 0.75 0.8 SG-PI750 0.75 220 10-110 12-1 0.75 1 SG-PI1100 1.1 220 8-155 18-1 1.5 1.5 SG-PI1500 1.5 220 7.5-195 22.5-1 1.5 2 DC voltage 3-phase AC voltage SG-PI2200 SG-PI3000 2.2 3 220 220 / 27-285 16-265 18-1 24-2 2.2 3.7 3 4 Optimization of Single Pumping System Single pumping system consists of only one pump, solar modules and one inverter. The aim of optimization design is to reduce the amount of PV modules used as much as possible on the basis of fulfilling the water head and capacity requirement. The rotational speed of the pump can be regulated according to the actual irradiation: when the irradiation reaches its peak, the pump runs at the rated speed and the output power of the solar array approaches the peak; when the irradiation is less abundant, the pump runs in MPPT mode; when the pump has no water capacity, the system stops working. Thus, this pumping system is very different from traditional pumping systems in the design, in which the system can be optimized according to the requirements of water head, capacity, and local conditions of irradiation. SG-PI4000 SG-PI5500 SG-PI7500 SG-PI9200 SG-PI11000 SG-PI15000 4 5.5 7.5 9.2 11 15 32-370 8-215 3-290 7-200 9-240 14-315 24-2 42-6 72-6 72-10 72-10 72-10 5.5 5.5 7.5 11 11 15 5 7 9.5 11.5 13.5 20 Optimization of Multi-Pumping System Multi-pumping system consists of several pumps. The pumps can be driven either by only one high-power inverter, or by several matching inverters. In the case of large capacity are demanded, the operation of multi-pumping system is more flexible. By using the switching controller, all pumps run in MPPT mode when the irradiation is abundant; when irradiation is not abundant, some pumps will be shut down and the solar array supply power intensively for the rest running pumps. Based on the optimization of single pump system, the range of speed has been further optimized, and the system always works in high efficiency. SG-PI18500 SG-PI22000 SG-PI30000 SG-PI37000 SG-PI44000 18.5 30 37 44 17-220 21-270 27-184 33-130 200-408 72-18 72-18 72-30 72-45 48-27 18.5 22 30 37 45 24 30 40 48 57 SG-PI55000 55 260-375 48-36 55 70
SUNGEN Solar Pumping Application Examples SUNGEN Solar Pumping Application Examples Agriculture lrrigation Application: SUNGEN solar pumping system is used for irrigating economic crops in desert with drip irrigation method.water head 33m, measured output water of 95m 3 on 21st June 2009, irrigating land area of 17 acres (about 70000.35m 2 ) System configuration: solar pumping irrigation system S G-PI3000. Landscape Fountains Application: solar pumping system SG-PI550, water head 20m, output water 9 m 3 /day Systemconfiguration: solar pumping inverter SG-PB750L, 0.55kW AC pump, solar panels power of 700W. Desert Control Application: SUNGEN solar pumping system is used for drip irrigation in desert area, which enable it to cultivate special sand-spoliation plants such as Calligonum mongolicunl, Tamarisk and Haloxylon trees, etc. The water head can reach 45m and the output water is 36m 3 /h System configuration: 11kW stand-alone solar pumping inverter, 9.2kW AC pump, solar panels power of 15kW, and other devices. City Waterscape Application: city waterscape. Measured results in sunny day: water head 11m, water output 130 m 3 /d. System configuration: solar pumping inverter SG-PB1500L (2 units), 1.5kW AC pump (2 units), solar panels power of 4.4kW.