Vicenza Torino Verona Head office in Signa Florence Production Branch in Sona Verona Florence Elpower in Noventa Vicentina Vicenza Uni.Comp in Beinasco - Torino
IRMIE Group 85 employees Turnover of 15 million Spread over more than 30 countries
TEST BENCHES SPECIAL EQUIPMENT POWER SUPPLY FOR WORKSHOP ETH BRAKE TESTING SYSTEMS
Dynamic Testing Benches For Motor and Trailer Bogies Test at Max speed up to 350 Km/h; Test of all the bogie sensors; Measurement of temperature at the most critical points (e.g.: bearing box, gear, etc.); Measurement of bogie vibrations; Measurement of electric motor parameters; Measurement of noise level; Adjustable centreline.
Electric Motor Test Benches DC Motor Test Benches Test at Max power; Visual check of Brushes Twinkle. AC Motor Test Benches Light Version Type tests; Routine tests as per EN 60349-2; Test with no load: at locked and nolocked rotor; Test with load; Overspeed Test; Vibration Tests.
Electric Motor Test Benches AC Motor Test Benches Fully Automatic Automatic mechanism for locked rotor test; Easy set of new testing procedure; Minimum civil work impact; Possibility to be expanded for DC application.
Reduction Gear Test Benches Axle with wheels, bearing boxes and motor Axle without wheels, motor and bearing boxes Test at Max speed; Test of all the wheelset sensors; Measurement of temperature at the most critical points (e.g.: bearing box, gear, etc.); Measurement of wheelset vibrations; Measurement of electric motor parameters; Measurement of noise level.
Auxiliary and Traction Converter Test Benches Complete test rooms for static converters of rolling stock, in particular for testing traction converters, auxiliary services, along with their modules and components. Tests can be performed under full load or at reduced power.
Compressor Test Benches Supporting & rotating frame for easy inspection; External tank for flow testing; Soundproof Cabin and Control System by means of industrial touch screen.
HVAC Test Benches Supporting frame for easy inspection; Functioning tests (Flow, Temperature, Humidity, Current & Voltage absorption, Vibration sensors); Soundproof Cabin and Control System by means of industrial touch screen.
Generator Load Test Benches The generators are tested without being disassembled from the locomotive and the following data can be collected: Temperatures; Pressures; Engine rpm; Logical state On/Off, (alarms or states); Vdc voltage signals from locomotive; Vac auxiliary generator voltage; Load box DC current & Voltage.
Pantograph Test Benches Top Head with load cell for force detection; Linear transducer for vertical stroke measurement; Control by means of industrial touch screen.
Dielectric Strength Tester Available Voltage: 5 kv - 7,5 kv - 15 kv - 60 kv - 100 kv; Available Power: 1 kw to 100 kw; Control by means of industrial touch screen.
High Speed Circuit Breaker Tester Power Supplies up to 10000 Amps to test and calibrate circuit breaker; Control by means of industrial touch screen.
ALSTOM - SPAGNA TCDD TURKISH STATE RAILWAYS SWITZERLAND RAILWAY SOUTH AFRICA ITALIAN INFRASTRUCTURE RAILWAY METRO MADRID - SPAIN SAUDI RAILWAYS ORGANIZATION ITALIAN RAILWAY HITACHI RAIL ITALY METRO C SPA - ITALY HITACHI RAIL UK ATTIKO METRO - GREECE SOUTH AFRICA MANTENA SA - NORWAY ANSALDO STS ITALY
Portable Brake Testing Unit It is possible to perform tests, automatically, without Locomotor and by one operator only, following the UIC 540 & 543; Laptop to control the test on wireless communication with the bench; Pressure detection system at all the test points by means of pressure transducers connected with extra-flexible cables.
Brake Panel Testing Unit It is possible to perform tests, automatically, on the brake panel demounted from the train following the regulation prescribed by the component manufacturer; Operating software easily programmable; Testing report; Remote assistance.
Test Benches for Solenoid Valves and Distributors The bench is able to check, for each valve to be inspected, the following parameters: Leakage; Max flow; Operation at 24-72-110 Vdc.
Test Benches for Brake Cylinders without Calipers Automatic testing of force, leakage, stroke and self pad wear adjustment; Easily programmable; Automatic calibration system; Check of the brake pad adjuster.
Test Benches for Brake Cylinders with Calipers Automatic testing of force, leakage, stroke and self pad wear adjustment; Easily programmable; Automatic calibration system; Check of the brake pad adjuster.
Solutions in Fixed Installations - Containers - Outfitted Vans Leakage test on complete train (freight or passenger) composition; Only one operator required; No locomotive needed.
ITALY & SPAIN SWITZERLAND RAILWAY TCDD TURKISH STATE RAILWAYS ITALY & BELGIUM NEUERO TECHNOLOGY GmbH - Germany ITALFERR SPA - ITALY HITACHI RAIL ITALY METRO C SPA - ITALY ANSALDO STS ITALY RIVALTA TERMINAL EUROPA SPA ITALY ITALIAN RAILWAY ELCOND ENGENIRING DOC SLOVENIA BOMBARDIER
Multi Voltage Power Supply System for Traction Test - Container Solution Quick installation; Easy to be re-located; Just a concrete basement needed; Input Voltage from MV or OHL at 25 kvac or 3 kvdc; Output Voltage at 3 kvdc, 1.5 kvdc, 750 Vdc, 600 Vdc and 25 kvac. Adjustable voltage as per EN50163.
Multi Voltage Power Supply System for Traction Test - In Room Solution Input Voltage from MV line and output Voltage at 25 kv 50 Hz, 15 kv 16 2/3 Hz, 1,5 kv 50 Hz, 3 kvdc, 1,5 kvdc, 750 Vdc and 600 Vdc. Adjustable voltage as per EN50163.
Shore Supply Output Voltage at: 1000 Vac 16 2/3 Hz 1500 Vac 50 Hz 1500 Vdc 3000 Vdc 750 Vdc 600 Vdc Adjustable voltage as per EN50163. Motorized Cable Reel
Power Supply Units for Test Rooms We realize static converters for test rooms. The converter is dimensioned according to customer s needs and the rate goes from few kilowatts to 3 MW and more.
Battery Charge/Discharge Benches Complete solution for battery charging/discharging, for use in the railway/metro market; Support surface to collect drips during topup operations and to extract the vapours produced during the operation phases safely; Simple interface for command and control, as well as the option of registering and archiving the tests are given by the industrial touch screens; Air extractor and hydrogen sensor; Bench structure very sturdy - stainless steel 304/316.
Trolley-mounted Battery Chargers and Dischargers Input voltage on request from 400V 50 Hz or 415V 50 Hz; Single or multiple range output voltages able to cover all battery voltages used in the railway/metro market; Other voltages and outputs available on request; Various power values available on request.
Retractable Rigid Catenary Interlocked with Depot Safety System Production of rigid catenaries and mobile sections, thus with the option of having removable sections to enable the transit of bridge cranes or access to the train roof
SWITZERLAND SNCB - BELGIUM ITALY ALSTOM FERROVIARIA SPA - ITALY WABTEC RAIL LIMITED UK RENFE - SPAIN BOMBARDIER - ITALY ITALIAN RAILWAY KELLER ELETTROMECCANICA SPA - ITALY RUSSIAN RAILWAYS RZD IKERLAN - SPAIN SNCF - FRANCE ANSALDO STS ITALY TCDD TURKISH STATE RAILWAYS
Single Cabin or Centralized System to feed parked Train Single Cabin For DC systems 3000 V - 1500 V - 750 V; Designed for outdoor installation with compact dimensions, thus also suitable for inter-track assembly; Able to protect the powered load in the event of short circuits. Centralized Installations Possible for all types of power supply system, whether DC or AC; Used wherever power has to be supplied to multiple tracks.
Mobile Units on VAN for easy attendance Production of custom units on outfitted trucks or movable vehicles, designed to supply power to parked convoys. The converters are powered by a diesel generator.
ITALFERR SPA - ITALY ITALIAN INFRASTRUCTURE RAILWAY TCDD TURKISH STATE RAILWAYS ELCOND ENGENIRING DOC SLOVENIA ITALIAN RAILWAY ITALIAN REGIONAL RAILWAY
Thank you very much for your attention. Irmie Impianti s.r.l. Head office Via Giorgio La Pira, 20/22-50058 Signa (FI) Italy Tel +39 055 8790388 +39 0558790391 Fax +39 055 8790884 Branch Via dell Industria, 13 e 17-37060 Sona (VR) Italy Tel +39 045 6090355 Fax +39 045 6088735 info@irmieimpianti.com FOR MORE DETAILS PLEASE VISIT OUR WEBSITE www.irmieimpianti.com