INERTER C DC 400 Tough, Compact... and Portable ArcMaster power source comes with: Power cord 2 x dinse mm plugs Operating manual 5Year * Quick Specifications Processes STICK () TIG () Lift MIG () Flux Cored () Air Carbon Arc Cutting & Gouging () Industrial Applications Maintenance & repair Industrial manufacturing Construction Input oltage -/ AC Phase Input Frequency / Rated Output @ Duty Cycle 400A/36@25% (-/, 3 phase) 300A/32@60% (-/, 3 phase) 200A/28@100% (-/, 3 phase) 300A/32@25% (-, 1 phase) A/29@60% (-, 1 phase) 180A/27@100% (-, 1 phase) Output Range 5-400A Weight 62 lb (28 kg) Order Information Part No: 10-3072 : ArcMaster Excellent Performance! Embedded microprocessor with digital controls, delivering full multi process /C with perfectly smooth, stable arc characteristics for MIG solid and Flux cored wires, Air Carbon Arc cutting and Gouging, E6010 Cellulose and low hydrogen electrodes. Smart Logic & Easy Link! Prevents damage to the internal components if installed to improper voltage. Multi voltage -/ 1 or 3 phase providing maximum flexibility. Thermal Overload Protection! Indicator alerts the operator if duty cycle is exceeded or airflow is blocked. Twist Lock Output Terminals! Allows for easy polarity changing and cable connection. Remote Receptacle Fitted! Makes compatibility of Thermal Arc, competitive wire feeders and remote devices simple. Easy to use! Simple, user friendly set-up and operation. Smart Warning Diagnostics! Alerts operator to power supply abnormalities. Standards Compliant Integrated RD! oltage Reduction Device reduces the OC when the power supply is not in use. This all but eliminates the risk of electrocution to the operator from the secondary welding circuit. Job Save & Load! Allows operator to store up to 5 exact optimized welding parameters then digitally recall them with perfect repeatability. Lift Start TIG! Provides TIG arc starting without use of high frequency. Hot Start! Adjustable Hot Start for optimized starting performance. Rack Systems! Available in 4, 6 or 8 pack packages with electrical. * Limited warranty. Refer to warranty schedule.
INERTER C DC 400 Features # Inbuilt Smart Logic prevents damage from connectiton to incorrect voltage. Integrated RD. Simple to use operator interface. Digital Display includes olt/amp meter, parameter setting, thermal overload protection & warning circuitry indicator. Process switch: STICK, Lift-Start TIG and MIG functions. 14 & 19 pin remote receptacle Twist lock mm dinse output terminal Digital Process Control: Hot start, Arc Force, Inductance and Save/Load function.
INERTER C DC 400 Specifications # ArcMaster Input voltage -/ AC phase Rated output 400A/36 @ 25% (-/, 3 phase) @ duty cycle 300A/32 @ 60% (-/, 3 phase) 200A/28 @ 100% (-/, 3 phase) 300A/32 @ 25% (-, 1 phase) A/29 @ 60% (-, 1 phase) 180A/27 @ 100% (-, 1 phase) OC 65 Welding oltage Range10-36 Output range 5-400A Approvals CSA (pending); IP23S; IEC 60974-1 (CE) Primary cable length 10ft Dimensions & Weight Dimensions HxWxD 16.5 x 8.3 x 17.7 in (420 x 210 x 4 mm) Weight 62 lb (28 kg) Input oltage (AC) Duty Output OC Output No. phase Input Input Input ka kw Cycle Amps oltage Amps Amps Amps Output 25% 400 65 36 3 67 60 30 24.0 18.0 60% 300 65 32 3 44 40 20 16.0 12.0 100% 200 65 28 3 26 23 11.5 9.2 6.9 No Load 3 1.4 1.1 0.7 0.5 0.13 Output 25% 300 65 32 1 96 87 20.0 12.0 60% 65 29 1 67 60 13.9 8.3 100% 180 65 27 1 49 44 10.2 6.1 No Load 1 2.5 1.8 0.5 0.13 Output Characteristics # STICK PROCESS () OC LIFT TIG PROCESS () OC () OC MIG PROCESS 36 10 18 160A 10 5A 400A 420A (A) 25A 400A (A) 5A 400A (A)
INERTER C DC 400 Control Panel # 1 2 1. RD - (oltage Reduction Device) lights indicate on or off 2. STICK/MIG Parameters - Pressing this button scrolls through the STICK functions (Hot Start, Arc Control, Current) or MIG functions (olts, Inductance). 3. Digital LED display welding amperage and voltage or parameter values are displayed in these windows. Internal warnings such as over temperature, low or high input voltage applied are signaled to the operator by a warning sound and error message on the screen. 4. Save/Load Buttons - By using the Save & Load buttons the operator can easily save up to 5 welding programs. 3 4 5 6 7 8 5. Control knob allows the operator to adjust the output amperage or voltage within the entire range of the power source, also used to set each parameter value. 6. Process functions pressing this button scrolls through the output process modes (STICK, Lift TIG, MIG ). 7. Remote current function - pressing this button enables remote current. 8. Remote contactor function - pressing this button enables remote contactor on or off.
INERTER C DC 400 Options & Accessories # Stick Kit 10-4082A Work clamp with 25 1 AWG cable and stick electrode holder with 25 1 AWG cable. TIG Kit 10-4080 Includes regulator/flowgauge,12.5ft 200 Amp TIG torch with valve. Accessory kit including 1 ea of 0.040 x7, 1/16 x7 & 3/32 x7 2% Tungsten with collet & collet bodies, 1 ea 1/4, 5/16, 3/8 alumina cup. Dinse Connector 10-2020 T-mm dinse style male plug. Hand Held Pendant 10-2005 Includes contactor On/Off switch & current control with 25ft cable and 14-pin male plug. Foot Control 10-2008 15ft 10-2007 25ft Contactor On/Off & current control with cable & 14-pin. Extension Cable 10-2030 3ft 10-2031 15ft 10-2032 25ft 10-2033 ft 10-2034 75ft With 14-pin male plug and 14-pin female cable receptacle. Torch Switch On/Off 10-2001 25ft Torch mounted with 14-pin male plug. Torch Switch On/Off w/current control 10-2002 25ft for CK9 Handle 10-2003 25ft for CK17 Handle 10-2004 25ft for CK26 Handle Torch mounted with 14-pin male plug. Running Gear/Cylinder Cart 205199 For welding power source and/or gas cylinders.
INERTER C DC 400 ArcMaster Racks are the ideal system for onsite applications including construction and shipbuilding. Quick Specifications # Processes MIG () Stick () TIG and Lift-Arc TIG () Flux Cored () Air Carbon Arc Cutting and Gouging () Industrial Applications Construction Fabrication Shipbuilding Rental Fleets Input oltage -/ AC 3 Phase^^ Rack Capacity Accommodates ArcMaster 300A & 400A inverter power sources Weight & Dimensions^ 4 pack w/electrical 2lb H55.5 x W26 x D41 6 pack w/electrical 400lb H55.5 x W26 x D51 8 pack w/electrical 470lb H55.5 x W26 x D61 Order Information Part No: 10-4029 : ArcMaster 4 pack** Part No: 10-4031 : ArcMaster 6 pack** Part No: 10-4033 : ArcMaster 8 pack** Part No: W4009113 : ArcMaster 4 pack 400MST package ^Weight does not include power supplies. ^^ArcMaster racks electrics are rated for 3 phase power only. **Power supplies not included. Easily Moved & Transported! All 4, 6 and 8 pack racks are available with two lifting eyes, Lift truck fork pockets in base and rugged skid for ease of transportation and moving. Quick Connect! Electrical disconnect allows for easy connection with one primary power input cord. Circuit Breaker Fitted! All racks factory equipped with environmentally protected circuit breaker panel to provide primary power line protection for each inverter power supply. Rack Packages! Available as a 400MST package with power supplies installed and commonly used with the Thermal Arc Portafeed S212 suitcase feeder to provide a reliable and durable solution to construction MIG () and Flux Cored () welding. Approvals Compliant! Meets IP23S and NEC requirements when properly installed. Compact size! Small foot print makes it ideal for easy transportation in pickup trucks or through doorways. Tel: 800 255 5846 Tel: 905 827 1111 Tel: 905 827 9777 ArcMaster Racks Fax: 800 332 0946 Fax: 905 827 0813 Fax: 905 827 9797 Form No.:
INERTER C DC 400 EasyFind Guide - build your own package # Ordering Information ArcMaster Power Source 10-3072 ArcMaster is capable of (Gas Metal Arc Welding) (Flux Cored Arc Welding) (Gas Tungsten Arc Welding) (Shielded Metal Arc Welding) (Carbon Arc Gouging) Gas Metal Arc Welding Flux Cored Arc Welding Gas Tungsten Arc Welding Shielded Metal Arc Welding Carbon Arc Gouging - Air Wirefeeder 26 TIG Torch Kit - Air Cooled Electrode Work Lead Kit Gouging Torch Ultrafeed A2000 Ultrafeed A4000 Ultrafeed A4000D Portafeed S212 W3300001 W3400001 W3420001 W3512002 TIG Kit 10-4080 Stick Kit 25ft 10-4082A Arcair K4000 Torch Assy 7ft 61082008 MIG Gun Remote Control Device Remote Control Device Work Lead Tweco Spraymaster 12ft MS312-3545 Tweco Spraymaster 15ft MS315-3545 Tweco Spraymaster 12ft MS312-116 Tweco Spraymaster 15ft MS315-116 Interconnection Cables Interconnection Assy 6ft W4009204 Interconnection Assy 15ft W4009205 Interconnection Assy 25ft W4009206 Interconnection Assy ft W4009207 On/Off Switch 25ft 10-2001 Slider Control CK9 Handle 10-2002 Slider Control CK17 Handle 10-2003 Slider Control CK26 Handle 10-2004 Foot Control 15ft 10-2008 Foot Control 25ft 10-2007 Work Lead, 1 AWG cable, 10ft P001912810 Hand Pendant 25ft 10-2005 For detailed accessory descriptions see ordering information Gas Regulator 4,6 & 8 Rack Systems Running Gear ictor Reg/flowmeter (mixed) 0781-3873 ictor Reg/flowmeter (CO 2 ) 0781-0353 Work Lead Work Lead, 1 AWG cable, 10ft P001912810 **Power supplies not included. ArcMaster 4 Rack** 10-4029 ArcMaster 6 Rack** 10-4031 Arcmaster 8 Rack** 10-4033 205199
INERTER C DC 400 Ordering Information # PRODUCT PART NO. DESCRIPTION QTY PRICE ArcMaster 400MST 10-3072 Power supply only: includes 400MST with power cord and 2 each dinse mm plugs ArcMaster 4 pack 400MST package W4009113 4 x ArcMaster, 4 pack rack, circuit breaker panel AESSORIES Stick Kit 10-4082A Work clamp with 25 cable, and stick electrode with 25 1 AWG cable TIG Kit 10-4080 Includes regulator/flowgauge, 12.5ft 1 Amp TIG torch with valve, accessory kit includes 1 ea of.040 x7, 1/16 x7, 3/32 x7 2% Tungsten with collet & collet bodies, 1 ea 1/4, 5/16, 3/8 alumina cup Dinse Connector 10-2020 Tmm Dinse style male plug Hand Held Pendant 10-2005 Includes contactor On/Off switch and current control with 25ft cable and 14-pin male plug Foot Control 10-2008 Contactor On/Off and current control with 15ft cable and 14-pin male plug 10-2007 Contactor On/Off and current control with 25ft cable and 14-pin male plug Extension Cable 10-2030 3ft with 14-pin male plug and 14-pin female cable receptacle 10-2031 15ft with 14-pin male plug and 14-pin female cable receptacle 10-2032 25ft with 14-pin male plug and 14-pin female cable receptacle 10-2033 ft with 14-pin male plug and 14-pin female cable receptacle 10-2034 75ft with 14-pin male plug and 14-pin female cable receptacle Torch Switch On/Off 10-2001 25ft torch mounted with 14-pin male plug Torch Switch On/Off w/current control 10-2002 25ft torch mounted with 14-pin male plug - adapts to CK9 torch handle 10-2003 25ft torch mounted with 14-pin male plug - adapts to CK17 torch handle 10-2004 25ft torch mounted with 14-pin male plug - adapts to CK26 torch handle Rack Systems* 10-4029 4 pack w/electrical 10-4031 6 pack w/electrical 10-4033 8 pack w/electrical Running Gear/Cylinder Cart 205199 For welding power source and/or gas cylinders Tweco Spraymaster 12ft MS312-3545 Gun assembly with 12ft cable, 3 Amp @ 80%, suits.035 -.045 wire Tweco Spraymaster 15ft MS315-3545 Gun assembly with 15ft cable, 3 Amp @ 80%, suits.035 -.045 wire Tweco Spraymaster 12ft MS312-116 Gun assembly with 12ft cable, 3 Amp @ 80%, suits 1/16 wire Tweco Spraymaster 15ft MS315-116 Gun assembly with 15ft cable, 3 Amp @ 80%, suits 1/16 wire ictor Regulator/Flowmeter mixed gases 0781-3873 HSR regulator/flowmeter, Argon-Argon/CO 2 mixed gases ictor Regulator/Flowmeter CO 2 0781-0353 SR311 regulator/flowmeter, CO 2 gas Arcair K4000 Gouging Torch 61082008 K4000 torch and 7ft cable, 1000 Amp @ 100% WIRE FEEDERS## Ultrafeed A2000 W3300001 110, /, heavy duty 2-roll wirefeeder Ultrafeed A2000 W3400001 110, /, heavy duty 2-roll wirefeeder Ultrafeed A4000 W3420001 110, /, heavy duty 4-roll wirefeeder Portafeed S 212* W3512002 15-100 DC, heavy duty, /C operation, 2 roll wirefeeder TOTAL QUOTE PRICE *Used in or C mode for & welding. **Power supplies not included. See Rack Systems brochure for details. ## See corresponding literature for further details and features of wirefeeders.