Efficient products that move mountains

Efficient products that move mountains

GIPO is setting out to conquer new summits GIPO have always set the standard in the area of processing systems. The first GIPO machine was developed around 25 years ago, mobile crushing is once again becoming important. This is mainly due to two reasons: a) Earlier, only stationary processing plants could be used in quarries and gravel works. Today, this function is taken on increasingly by mobile crushers. The machine is only on site when it is actually required. b) The recycling and immediate recycling of exploded and crushed material in construction projects make mobile crushers the most efficient and economical solutions in building material management: gravel deposits are spared, expensive storage and transportation are avoided. As a Swiss pioneer in this area, ongoing development of components and machine types is a vital contribution by our engineers. GIPOKOMBI is one of the latest acquisitions. Combining the crusher and screen in one plant brings distinct space, environmental and cost advantages. GIPO plants are being operated extensively throughout europe. They are distinguished by high-grade components, diesel-hydraulic actuation concept and proven longevity. We continually incorporate technical innovations in our machines and in the shortest possible time. 2

Product summary GIPOKOMBI Mobile track multi-purpose plants Pages 4-5 GIPOREC Mobile track impact crushers Pages 6-7 GIPOGIGA Mobile track impact crushers and screen plants Pages 8-9 GIPOBAC Mobile track jaw crushers Pages 10-11 GIPOSCREEN Mobile track screen plants Pages 12-13 GIPOSTATION Stationary plants Pages 14-15 GIPO Air separation shifter plants Pages 16-17 GIPO Transport systems Pages 18-19 Plants for processing: Natural stone Asphalt / pavement break-up Reinforced concrete break-up Building rubble Blast furnace slag Coal Glass 3

GIPOKOMBI cracks every task The mobile tracked GIPO combo-plant is a highly efficient system with impact crusher and screen built onto one chassis. The tried and tested GIPO impact crushers and a compact design are the special features of combo-plants. Where hitherto two separate machines (crusher and screen) were used in manufacturing a classified end product, only one machine is now needed. This means crucial cost savings for the manufacturer in terms of purchase, transportation, fuel consumption and in environmental impacts. The compact plant takes up less space at the construction site, and many classified end products can result simultaneously. The extremely powerful GIPO impact crushers are combined with a 2-deck screening machine. Owing to the integrated screening machine, the plants produce a high quality end product. With the integrated oversized particle feedback, one can operate with a wider crushing gap. This brings advantages in crushing performance, in rate of wear and also in granule quality. The infinitely variable adjustment of rotor speed simplifies feed-material processing. With the proven fully hydraulic actuator, even the hardest stones and concrete can be crushed without a problem. Level IIIA diesel engines form an integral part of the Powerpack of the GIPOKOMBI; the engines produce lower emissions and are already equipped to meet subsequent and more stringent environmental regulations. The installations can also be equipped with a soot particle filter. Owing to the feeding hopper with the fixed hopper walls and the compact oversized particle recycling belt, set-up time is virtually dispensed with. The machine can be transported from one location to another quickly and in an uncomplicated manner without the need for dismantling. With the track-laying gear, which uses the full hydraulic power of the machine, it is possible to move the plant to almost any area. The plants can be conveniently operated from the wheel loader or excavator through radio control. Through multiple additional equipment such as side delivery belt, permanent magnet, extended radio control, belt weigher, water spray, it is possible to upgrade the GIPO-combo plants as required. The plants can be used universally and what is impressive is their high efficiency, well tried technology and easy operation. 4

Technical data GIPOKOMBI RC 100 C GIPOKOMBI RC 100 FDR GIPOKOMBI RC 110 C GIPOKOMBI RC 110 FDR Feeding hopper 4,5 m 3 4 m 3 6 m 3 5,5 m 3 Feeder channel 900 x 3500 mm 840 x 2500 mm 1000 x 4300 mm 920 x 3500 mm Perliminary screen machine 900 x 1600 mm 1000 x 2000 mm Intake impact crusher 970 x 800 (920) mm 970 x 800 (920) mm 1070 x 925 (1100) mm 1070 x 925 (1100) mm Rotor diameter 1200 mm 1200 mm 1300 mm 1300 mm Crusher capacity up to 250 t/h up to 250 t/h up to 300 t/h up to 300 t/h Conveyor feed channel 900 x 2300 mm 900 x 2300 mm 1100 x 2300 mm 1100 x 2300 mm Crusher conveyor channel 1000 x 8000 mm 1000 x 8000 mm 1200 x 8700 mm 1200 x 8700 mm 2-deck strainer 1500 x 3500 mm 1500 x 3500 mm 1500 x 4000 mm 1500 x 4000 mm Main conveyor belt 800 x 7900 mm 800 x 7900 mm 1000 x 7900 mm 1000 x 7900 mm Oversized particle recycling belt 500 x 8400 mm 500 x 9500 mm 500 x 8400 mm 500 x 9500 mm Powerpack CAT C13 ACERT / 328 kw CAT C13 ACERT / 328 kw CAT C15 ACERT / 403 kw CAT C15 ACERT / 403 kw Transport length 18200 mm 18800 mm 19450 mm 20500 mm Transport width 3000 mm 3000 mm 3200 mm 3200 mm Transport height 3680 mm 3680 mm 3750 mm 3750 mm Weight 50000 kg 52000 kg 59000 kg 62000 kg Technical data GIPOKOMBI RC 131 C GIPOKOMBI RC 131 FDR GIPOKOMBI RC 130 C GIPOKOMBI RC 130 FDR Feeding hopper 5,5 m 3 5,0 m 3 7,5 m 3 7,0 m 3 Feeder channel 1200 x 3500 mm 1120 x 2500 mm 1200 x 4300 mm 1120 x 3500 mm Perliminary screen machine 1200 x 1600 mm 1200 x 2000 mm Intake impact crusher 1270 x 800 (920) mm 1270 x 800 (920) mm 1270 x 925 (1100) mm 1270 x 925 (1100) mm Rotor diameter 1200 mm 1200 mm 1300 mm 1300 mm Crusher capacity up to 350 t/h up to 350 t/h up to 450t/h up to 450t/h Conveyor feed channel 1300 x 2300 mm 1300 x 2300 mm 1300 x 2300 mm 1300 x 2300 mm Crusher conveyor channel 1400 x 8700 mm 1400 x 8700 mm 1400 x 8800 mm 1400 x 8800 mm 2-deck strainer 1500 x 4000 mm 1500 x 4000 mm 1800 x 4500 mm 1800 x 4500 mm Main conveyor belt 1000 x 7900 mm 1000 x 7900 mm 1200 x 7900 mm 1200 x 7900 mm Oversized particle recycling belt 500 x 8000 mm 500 x 9500 mm 650 x 8400 mm 650 x 9500 mm Powerpack CAT C15 ACERT / 403 kw CAT C15 ACERT / 403 kw CAT C15 ACERT / 433 kw CAT C15 ACERT / 433 kw Transport length 18700 mm 19350 mm 19450 mm 20500 mm Transport width 3200 mm 3200 mm 3400 mm 3400 mm Transport height 3750 mm 3750 mm 3800 mm 3800 mm Weight 57000 kg 60000 kg 70000 kg 73000 kg Technical data GIPOKOMBI RC 150 C GIPOKOMBI RC 150 FDR GIPOKOMBI RC 170 C GIPOKOMBI RC 170 FDR Feeding hopper 10 m 3 9 m 3 14 m 3 13 m 3 Feeder channel 1400 x 4300 mm 1320 x 3500 mm 1600 x 4300 mm 1520 x 3500 mm Perliminary screen machine 1400 x 2000 mm 1620 x 3500 mm Intake impact crusher 1470 x 925 (1100) mm 1470 x 925 (1100) mm 1670 x 925 (1100) mm 1670 x 925 (1100) mm Rotor diameter 1300 mm 1300 mm 1400 mm 1400 mm Crusher capacity up to 500 t/h up to 500 t/h up to 1100 t/h up to 1100 t/h Conveyor feed channel 1500 x 2300 mm 1500 x 2300 mm 1700 x 2300 mm 1700 x 2300 mm Crusher conveyor channel 1600 x 10000 mm 1600 x 10000 mm 1800 x 12500 mm 1800 x 12500 mm 2-deck strainer 2000 x 4500 mm 2000 x 4500 mm 2000 x 7000 mm 2000 x 7000 mm Main conveyor belt 1400 x 7900 mm 1400 x 7900 mm 1600 x 10000 mm 16000 x 10000 mm Oversized particle recycling belt 650 x 8400 mm 650 x 8900 mm 800 x 10000 mm 800 x 10000 mm Powerpack CAT C18 ACERT / 522 kw CAT C18 ACERT / 522 kw CAT 3412 E / 746 kw CAT 3412 E / 746 kw Transport length 19450 mm 20500 mm 23000 mm 24000 mm Transport width 3400 mm 3400 mm 3600 mm 3600 mm Transport height 4100 mm 3800 mm 4100 mm 4100 mm Weight 81000 kg 84000 kg 125000 kg 130000 kg 5

GIPOREC impressive performance The mobile tracked GIPO impact crushers can be used universally and what is impressive is their technical quality, high efficiency, well tried technology and easy operation. The GIPO impact crushers with the two impact walls and infinitely variable adjustment of the rotor speed with the proven fully hydraulic actuation concept form the core of the plants. With the infinitely variable adjustment of the rotor speed, it is possible to have direct control over the material to be broken. Thanks to this economic actuation system, reinforced concrete, asphalt, building rubble, natural stone, coal and blast-furnace slags can be processed. The extremely powerful GIPO impact crusher is combined with a machine chassis with track-laying gear, powerpack, feeding hopper, feeder channel with integrated pre-screen or separate pre-screening, conveyor feed channel and crusher conveyor belt. Stage IIIA diesel engines are installed in the GIPOREC powerpack, which are essentially more economical than the previous models. The installations can also be equipped with a soot particle filter. The track-laying gear uses the power of the complete hydraulic system, enabling manoeuvring plants at almost any kind of site. Owing to the feeding hopper with the fixed hopper walls, set-up time is practically not required. Downwards from low loader, upwards to the feed and crushing is well under way. With the remote operation, the plants can be operated conveniently from the wheel loader or excavator. A variety of extras is available for GIPO impact crushers: side conveyor belt, permanent magnet, extended radio control, belt weigher, water spray, etc. 6

Technical data GIPOREC R 100 C GIPOREC R 100 FDR GIPOREC R 110 C GIPOREC R 110 FDR Feeding hopper 4,5 m 3 4 m 3 6 m 3 5,5 m 3 Feeder channel 900 x 3500 mm 840 x 2500 mm 1000 x 4300 mm 920 x 3500 mm Perliminary screen machine 900 x 1800 mm 1000 x 2000 mm Intake impact crusher 970 x 800 (920) mm 970 x 800 (920) mm 1070 x 925 (1100) mm 1070 x 925 (1100) mm Rotor diameter 1200 mm 1200 mm 1300 mm 1300 mm Crusher capacity up to 200 t/h up to 200 t/h up to 300 t/h up to 300 t/h Conveyor feed channel 900 x 2300 mm 900 x 2300 mm 1100 x 2300 mm 1100 x 2300 mm Discharge belt 1000 x 7500 mm 1000 x 7500 mm 1200 x 7500 mm 1200 x 7500 mm Powerpack CAT C9 ACERT / 261 kw CAT C9 ACERT / 261 kw CAT C13 ACERT / 328 kw CAT C13 ACERT / 328 kw Transport length 13700 mm 14500 mm 14500 mm 15700 mm Transport width 2500 mm 2500 mm 2700 mm 2700 mm Transport height 3300 mm 3300 mm 3750 mm 3750 mm Weight 32000 kg 34000 kg 46000 kg 50000 kg Technical data GIPOREC R 131 C GIPOREC R 131 FDR GIPOREC R 130 C GIPOREC R 130 FDR Feeding hopper 5,5 m 3 5,0 m 3 7,5 m 3 7,0 m 3 Feeder channel 1200 x 3500 mm 1120 x 2500 mm 1200 x 4300 mm 1120 x 3500 mm Perliminary screen machine 1200 x 1800 mm 1200 x 2000 mm Intake impact crusher 1270 x 800 (920) mm 1270 x 800 (920) mm 1270 x 925 (1100) mm 1270 x 925 (1100) mm Rotor diameter 1200 mm 1200 mm 1300 mm 1300 mm Crusher capacity up to 350 t/h up to 350 t/h up to 450 t/h up to 450 t/h Conveyor feed channel 1300 x 2300 mm 1300 x 2300 mm 1300 x 2300 mm 1300 x 2300 mm Discharge belt 1400 x 7500 mm 1400 x 7500 mm 1400 x 9000 mm 1400 x 9000 mm Powerpack CAT C13 ACERT / 328 kw CAT C13 ACERT / 328 kw CAT C15 ACERT / 403 kw CAT C15 ACERT / 403 kw Transport length 13800 mm 14500 mm 15950 mm 17150 mm Transport width 2900 mm 2900 mm 3200 mm 3200 mm Transport height 3600 mm 3600 mm 3800 mm 3800 mm Weight 40000 kg 42000 kg 57000 kg 60000 kg Technical data GIPOREC R 150 C GIPOREC R 150 FDR GIPOREC R 170 C GIPOREC R 170 FDR Feeding hopper 10 m 3 9 m 3 12 m 3 13 m 3 Feeder channel 1400 x 4300 mm 1320 x 3500 mm 1600 x 4300 mm 1520 x 3500 mm Perliminary screen machine 1400 x 2000 mm 1600 x 2000 mm Intake impact crusher 1470 x 925 (1100) mm 1470 x 925 (1100) mm 1670 x 925 (1100) mm 1670 x 925 (1100) mm Rotor diameter 1300 mm 1300 mm 1300 mm 1300 mm Crusher capacity up to 500 t/h up to 500 t/h up to 600 t/h up to 600 t/h Conveyor feed channel 1500 x 2300 mm 1500 x 2300 mm 1700 x 2300 mm 1700 x 2300 mm Discharge belt 1600 x 9000 mm 1600 x 9000 mm 1800 x 9000 mm 1800 x 9000 mm Powerpack CAT C15 ACERT / 433 kw CAT C15 ACERT / 433 kw CAT C18 ACERT / 522 kw CAT C18 ACERT / 522 kw Transport length 15950 mm 17150 mm 15950 mm 17150 mm Transport width 3400 mm 3400 mm 3600 mm 3600 mm Transport height 3800 mm 3800 mm 3800 mm 3800 mm Weight 62000 kg 65000 kg 67000 kg 70000 kg 7

GIPOGIGA crushes and sorts enormous quantities The basic models GIPOREC R 100 and GIPOREC R 131 types can be extended with a single-deck screening unit. With this upgraded impact crusher, the end product can be screened off to produce a suitable end granule. The hallmark of the new type of plant is its high degree of flexibility, whereby the basic model of the impact crusher can be extended as the customer desires, and can be operated and transported with or without the screen. This brings cost benefits with the investment, as well as with fuel consumption and environmental impact. The return conveyor for oversize granules is attached securely to the plant and need not be detached for transportation. Consequently a high degree of mobility and short setup time is achieved. Thanks to the pivoting angle of 180, the return conveyor for oversize granules is uncoupled from the impact crusher for separate transportation of the impact crusher. Simple coupling and uncoupling of the screen unit at the impact crusher by means of a hydraulic cylinder is possible without the use of external hoisting apparatus, and can be done in under 10 minutes. For separate transport of the screen unit, the screen unit can be loaded and transported by means of a hook-lifting device without additional hoisting implements. To function as a mound conveyor, the return conveyor for oversize granules can be pivoted hydraulically through 180 on a stable turntable, thus providing a maximum discharge height of four metres for tipping onto the mound. No additional supports are necessary for performing crushing, which ensures maximum mobility. 8

Technical data GIPOREC R 100 C GIGA GIPOREC R 100 FDR GIGA GIPOREC R 100 RR PB GIGA Feeding hopper 4,5 m 3 4 m 3 6 m 3 Feeder channel 900 x 3500 mm 840 x 2500 mm Apron conveyor 900 x 4500 mm Perliminary screen machine 900 x 1800 mm Roller grizzly 100 / 8 A single deck strainer 1200 x 3500 mm 1200 x 3500 mm 1200 x 3500 mm Conveyor under screen 800 x 6000 mm 800 x 6000 mm 800 x 6000 mm Intake impact crusher 970 x 800 (920) mm 970 x 800 (920) mm 970 x 800 (920) mm Rotor diameter 1200 mm 1200 mm 1200 mm Crusher capacity up to 200 t/h up to 200 t/h up to 200 t/h Conveyor feed channel 1000 x 2300 mm 1000 x 2300 mm 1000 x 2300 mm Discharge belt 1200 x 7500 mm 1200 x 7500 mm 1200 x 7400 mm Oversized particle recycling belt 400 x 7500 mm 400 x 7500 mm 400 x 6500 mm Powerpack CAT C9 ACERT / 261 kw CAT C9 ACERT / 261 kw CAT C9 ACERT / 261 kw Transport length 16000 mm 16770 mm 17000 mm Transport width 2500 mm 2500 mm 2650 mm Transport height 3300 mm 3300 mm 3400 mm Weight with screen 43000 kg 44000 kg 63000 kg Weight without screen 36000 kg 37000 kg 56000 kg Technical data GIPOREC R 131 C GIGA GIPOREC R 131 FDR GIGA GIPOREC R 131 RR PB GIGA Feeding hopper 5,5 m 3 5 m 3 8 m 3 Feeder channel 1200 x 3500 mm 1120 x 2500 mm Apron conveyor 1200 x 4600 mm Perliminary screen machine 1200 x 1800 mm Roller grizzly 130 / 8 A single deck strainer 1500 x 3500 mm 1500 x 3500 mm 1500 x 3500 mm Conveyor under screen 1000 x 6000 mm 1000 x 6000 mm 1000 x 6000 mm Intake impact crusher 1270 x 800 (920) mm 1270 x 800 (920) mm 1270 x 800 (920) mm Rotor diameter 1200 mm 1200 mm 1200 mm Crusher capacity up to 350 t/h up to 350 t/h up to 350 t/h Conveyor feed channel 1300 x 2300 mm 1300 x 2300 mm 1300 x 2300 mm Discharge belt 1400 x 7500 mm 1400 x 7500 mm 1400 x 7500 mm Oversized particle recycling belt 500 x 7700 mm 500 x 7700 mm 500 x 6500 mm Powerpack CAT C13 ACERT / 354 kw CAT C13 ACERT / 354 kw CAT C13 ACERT / 354 kw Transport length 16200 mm 17000 mm 21000 mm Transport width 3000 mm 3000 mm 3000 mm Transport height 3600 mm 3600 mm 3600 mm Weight with screen 51500 kg 52500 kg 74000 kg Weight without screen 44000 kg 45000 kg 66000 kg 9

GIPOBAC also masters large chunks The GIPO jaw crushers are compact, mobile tracked crusher units. The plants are suitable for recycling building materials and for crushing stones. The single jaw crusher, which is suitable for hard stones, allows for convenient and precise setting of the desired granule size with the hydraulic gap adjustment using plug-in plates. Hydraulic actuation starts the crusher with a filled crushing jaw and the infinitely variable speed adjustment with constant crushing power. The fully diesel-hydraulic actuation concept used in all GIPO plants guarantees minimum susceptibility to failure due to dust, humidity and vibrations. The plants with highly dimensioned stage IIIA diesel motors also process the hardest stone rock chips. In the feeder channel with the integrated pre-screening, the fine portion can be removed from the side with a conveyor belt. In the separate screening machine, owing to the screen covering in the lower deck, a classified grain is screened out and likewise removed from the side. The jaw crushers are easy to transport and are quickly operative. The track laying gear enables rapid on-site positioning. With the remote operation of the feeder channel installed in series, the excavator driver can operate the complete plant by itself. Individual requirements can be matched optimum with the variety of additional equipment such as side conveyor belt, permanent magnet, conveyor feeder channel, extended radio control, belt weigher, water spraying. The installations can also be equipped with a soot particle filter. 10

Technical data GIPOBAC B 0960 C GIPOBAC B 0960 FDR GIPOBAC B 1170 C GIPOBAC B 1170 FDR Feeding hopper 4 m 3 4 m 3 5,5 m 3 5,0 m 3 Feeder channel 900 x 3500 mm 900 x 2500 mm 1100 x 4300 mm 1100 x 3500 mm Perliminary screen machine 900 x 1800 mm 1000 x 2000 mm Intake jaw crusher 900 x 587 mm 900 x 587 mm 1120 x 680 mm 1120 x 680 mm Crusher capacity up to 150 t/h up to 150 t/h up to 300 t/h up to 300 t/h Discharge belt 1000 x 9600 mm 1000 x 9600 mm 1200 x 10000 mm 1200 x 10000 mm Powerpack CAT C9 ACERT / 224 kw CAT C9 ACERT / 224 kw CAT C9 ACERT / 261 kw CAT C9 ACERT / 261 kw Transport length 13000 mm 15500 mm 15600 mm 17000 mm Transport width 2500 mm 2500 mm 2700 mm 2700 mm Transport height 3200 mm 3400 mm 3750 mm 3750 mm Weight 31000 kg 34000 kg 50000 kg 53000 kg Technical data GIPOBAC B 1385 C GIPOBAC B 1385 FDR GIPOBAC B 1195 C GIPOBAC B 1195 FDR Feeding hopper 7,5 m 3 7,0 m 3 6,0 m 3 8,0 m 3 Feeder channel 1200 x 4300 mm 1200 x 2500 mm 1100 x 4300 mm 1100 x 3500 mm Perliminary screen machine 1200 x 2500 mm 1100 x 2200 mm Intake jaw crusher 1300 x 850 mm 1300 x 850 mm 1120 x 950 mm 1120 x 950 mm Crusher capacity up to 500 t/h up to 500 t/h up to 570 t/h up to 570 t/h Discharge belt 1400 x 13000 mm 1400 x 13000 mm 1200 x 13000 mm 1200 x 13000 mm Powerpack C13 Acert / 328 kw C13 Acert / 328 kw C13 Acert / 354 kw CAT C13 Acert / 354 kw Transport length 17500 mm 19000 mm 18000 mm 18000 mm Transport width 3100 mm 3100 mm 3000 mm 3000 mm Transport height 4000 mm 4000 mm 4500 mm 4500 mm Weight 72 000 kg 75 000 kg 74 000 kg 75 000 kg 11

GIPOSCREEN s sorting is clean coarse and fine GIPOSCREEN plants are impressive with their high capacity. The plants move on track-laying gears and are diesel-hydraulic driven by powerful diesel motors with stage IIIA. Even in the strainers, the fully hydraulic actuation concept is insensitive to dust, humidity and vibrations. The powerful 2 and 21/2 deck screen guarantee a high throughput and clean material separation. The screen is complemented by a feed conveyor and swivelling stockpile belts. The screens are easy to transport and are quickly operative. With the track-laying gear, the quick conversion to use is done without a problem. Other features of the plants include optimum accessibility and easy maintenance. The GIPO screens are autonomous or combined with a crusher. The installations can also be equipped with a soot particle filter. 12

Technical data GIPOSCREEN S 1335 GIPOSCREEN S 1350 GIPOSCREEN S 1535 Screening machine 2-Deck / 1350 x 3500 mm 2 1/2-Deck / 1350 x 5000 mm 2-Deck / 1500 x 3500 mm Output up to 150 t/h up to 250 t/h up to 200 t/h Powerpack CAT / 106 kw CAT / 106 kw CAT / 106 kw Transport length 6700 mm 11700 mm 6700 mm Transport width 2500 mm 2500 mm 3000 mm Transport height 3600 mm 3600 mm 3600 mm Weight ca. 15000 kg ca. 22000 kg ca. 16000 kg Technical data GIPOSCREEN S 1550 GIPOSCREEN S 1560 Screening machine 2 1/2-Deck / 1500 x 5000 mm 2 1/2-Deck / 1500 x 6000 mm Output up to 300 t/h up to 350 t/h Powerpack CAT / 119 kw CAT / 119 kw Transport length 10300 mm 11000 mm Transport width 3000 mm 3000 mm Transport height 3600 mm 3600 mm Weight ca. 26000 kg ca. 28000 kg 13

GIPO STATION high performance GIPO impact crusher on the construction site of the longest railway tunnel in the world. Two GIPO impact crushers in use in Sedrun at the core piece of the Alptransit Gotthard. The two GIPO impact crushers P130 meet the most exacting standards through the processing of gneiss and mica slate of the Tavetscher and Gotthard massif. Two GIPO processing units arranged in parallel comprise of: feeding hopper, plate belts, roller grizzlies, impact crusher, conveyor channels, cleaning belts, transverse belt, steel construction and electric control. Feed hopper Apron conveyor Rendering conveyor Roller grizzly P130 impact crusher Technical data Material to convey: blasted solid rock Output: 600 to/h Transverse conveyor Discharge channel Electrical control Installed output: 500 kw 14

according to individual requirements GIPO produces individual designs that meet the conditions, environmental and performance requirements for stationary, fixed crusher- and screen plants. Impact crusher P 130 with feeder unit and conveyor belt Application: Covering material Output: up to 350 t/h Jaw crusher B 1385 with apron conveyor feed and pre-screening Application: gneiss and granite Output: up to 710 t/h Scrapping plants Application: Slags Output: 50 t/h 15

GIPO flexible in design Pick-up unit and impact crusher The building rubble and mixed demolition material (heavily reinforced concrete, wood, plastic, insulation material etc.) are picked up by the feed hopper. The feed material is conveyed via the feed channel with integrated pre-screening into the impact crusher. The pre-screened material is either transported to the discharge channel via bypass and then to the 1200 wide crusher discharge belt or via a lateral conveyor belt to the stockpile. The material for processing by the impact crusher is crushed and conveyed on the crusher discharge belt to the screen plant. Pneumatic classifier At the time of the transfer from the cross belt to the oversize particle feedback belt the pneumatic classifier separates the lightweight material such as wood, plastic and insulation material from the oversize particles using a ventilation fan. The lightweight material drops into the receptacle attached on the side. The pneumatic classifier operates using air recirculation with an integrated fine dust filter system. In the 2 ½ deck screen machine the end fraction is separated into two different granule sizes specifically so that they can be classified in the screen machine and so that the end result is optimum classification of the final grain. Another advantage with this 2 ½-deck design is that by using the simple changeover flap integrated in the screen machine it is possible to select a final grain size for either the larger or smaller machine width of the two differently coupled screen decks without the need to change screens. GIPOKOMBI RC 110 C with integrated separation for light density material (air separation shifter) 16 Rubble Iron sorted by conveyor magnet Light material End product

GIPOKOMBI RC 131 For use in highly reinforced concrete GIPOKOMBI RC MAG 2400 FDR with the Magotteaux vertical impact crusher for manu facturing fine granules and coarse sand 17

fast, problem-free GIPO TRANSPORT SYSTEMS and absolutely reliable GIPOKOMBI RC 131 C with 4 axle dollies for transport system 18

The various designs of the GIPO transport systems are unique and unsurpassed. The proven transport systems come in the 2-, 3- and 4-axle dolly versions. Whether GIPOKOMBI, GIPOREC or GIPOBAC, we provide the transport system suitable for every type of plant. High mobility, weight saving and very short assembly times are only a few of the economic advantages. All axles on the axle dolly are steered and can be radio-controlled. The overall design of the plant and axle system is optimised for rapid deployment and readiness for transportation. This ensures optimum use of plant capacity, quicker transportation and consequently greater economy. You will always travel better with a GIPO transport system. GIPOREC R 100 FDR GIGA with a twin-axle dolly transport system GIPOREC R 131 FDR GIGA with 3 axle dollies for transport system 19

Distribution- and dealership network 01.10 / 500 eng You can obtain detailed information about GIPO products from GIPO or from one of your distribution partners GIPO Ltd. Kohlplatzstrasse 15 CH-6462 Seedorf Phone: +41 41 874 81 10 Fax: +41 41 874 81 01 info@gipo.ch www.gipo.ch Switzerland Distribution- and dealership network You can obtain detailed information about GIPO products from GIPO or from one of your distribution partners. Submitted by: