CONTRA ROTATING CASED AXIAL FANS TCBBx2 / TCBTx2 Series

Similar documents
Plate mounted axial flow fans HXBR / HXTR Series

PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series. Plate mounted axial flow fans HXBR/HXTR. Corrosion resistance

ACOUSTIC CABINET FANS CVAB / CVAT Series

HXBR / HXTR Series PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR. Plate mounted axial flow fans HXBR/HXTR. Corrosion resistance

ROOF MOUNTED AXIAL FLOW FANS HCTB / HCTT Series

CVAB / CVAT Series ACOUSTIC CABINET FANS CVAB / CVAT. Acoustic cabinet fans. Backward curved centrifugal impellers.

ACOUSTIC CABINET FANS CVB / CVT Series

supplied in Form (B) configuration. Airflow over Impeller- Motor.

IN-LINE MIXED FLOW DUCT FANS TD-MIXVENT Series

BACKWARD CURVE CENTRIFUGAL FANS KABB / KABT Series

CBM Small Series LOW PRESSURE CENTRIFUGAL FANS. CBM Small. Low pressure centrifugal fans. Impeller dynamically balanced.

CBM Series LOW PRESSURE CENTRIFUGAL FANS CBM. Low pressure centrifugal fans. Impeller dynamically balanced. Anti-vibration mounts

COMPACT Series type HCFB / HCFT (Plastic impellers)

CENTRIFUGAL IN-LINE FANS VENT Series

ACOUSTIC CABINET FANS CENTRIBOX CVB/CVT. Acoustic cabinet fans. Circular duct connection flanges. Flame retardant IP55 remote terminal box

Short casing. Long casing (L version) Commercial premises

IN-LINE MIXED FLOW DUCT FANS TD-MIXVENT Series

IN-LINE CENTRIFUGAL DUCT FANS VT Series

Multifunctional roof fans for large flows. Multifunctional roof fans, highly robust construction, for large flows

DIRECT-AIR ILB / ILT Series Rectangular duct fans

VENT Series CENTRIFUGAL IN-LINE FANS VENT. In-Line duct fans. Mounting foot

CHMT Series, F Rated Fans

THT/HATCH THT/HATCH. Order code THT/HATCH 40 2T 1 N 1 G

Multifunctional 400ºC/2h and 300ºC/2h roof fans

CENTRIFUGAL DIRECT DRIVE FANS CMT-CMB

CGT Series Adjustable Pitch Fans

Axial fans 400ºC/2h and 300ºC/2h With soundproofed box. Extraction units with axial fans to work inside fire danger zones.

CGT Series Adjustable Pitch Fans

TGT Series Adjustable Pitch Fans

ACOUSTIC CABINET FANS Centribox CVB-CVT Series, Forward Curved Centrifugal Fans

400ºC/2h centrifugal roof fans with horizontal or vertical air outlet CHT 200 4T BS. Installed capacity

Series VENTS OVK. Low pressure axial fans in the steel casing with the air capacity up to m 3 /h for wall mounting

CHVB / CHVT Series. Cabinet fans designed for smoke extraction in fire condition F BACKWARD CURVED CENTRIFUGAL FANS CHVB / CHVT

TGT Series Adjustable Pitch Fans

BELT DRIVEN CABINET FANS CVTT Series

CYLINDRICAL CASED AXIAL FLOW FANS TGT Series - ADJUSTABLE PITCH FANS

Dynamically-balanced impellers with extremely robust cores CMP T 5.5

CAS 460 2T 7.5. Impeller size motor poles 2=3500 r/min. 60 Hz. Installed power

HIGH-POWERED VENTILATORS

CYLINDRICAL CASED AXIAL FLOW FANS

Ultra-quiet circular duct fans TD-SILENT ECOWATT Series

Robust wall-mounted axial or long-cased fans, PL version supplied with plastic impeller and AL version supplied with aluminium impeller

400ºC/2h and 300ºC/2h roof-mounted helical extractor fans with vertical air outlet

CONTINUO. Radial centrifugal impeller. Radial centrifugal impellers dynamically balanced, according to ISO 1940 standard,

Short casing. Long casing (L version) Highly versatile range due to different number of available blades and adjustable pitch angles

Square Mixed Flow Fans (MFQ)

Sabre Plate Mounted Sickle Fans (VSP)

TSAT: Single inlet, belt-driven centrifugal fans fitted with electric motors. CJTSA: Ventilation units with a forward-curved impeller.

CMB / CMT Series CENTRIFUGAL SINGLE INLET FANS. Centrifugal direct drive fans CMB/CMT 80 C. Impeller dynamically balanced

Bifurcated Case Axial Fans (BIFA)

Axial-flow Fan AFC. Model numbering system AF C / T. Accessories Three phase. Power rate 1.

CSXRT: Single inlet, belt-driven centrifugal fans fitted with electric motors. CJSXR: Ventilation units with a backward-curved impeller

Square Duct Fans - ESTOC Range. Estoc Features. Electrical Supply. Product Code. Sizes 355, 400, 450, 500, 560, 630 and 710.

CJBD/ALF CJBX/ALS CJBX/ALF CJBD/ALS VENTILATION UNITS WITH ALUMINIUM PROFILES. According EU Regulation

AAVC. Accessories HIGH PRESSURE FANS HIGH PRESSURE WITH BACKWARD IMPELLER MANUFACTURING FEATURES:

Performance. Sound Levels. Impellers. Motors. Accessories

Mixed Flow Roof Fans (RMH)

Vent-Axia Sabre Sickle Roof Fans (VSR)

IN-LINE DUCT FANS MIXVENT-TD Fan Systems

Explanation of AR Series Ventilator Products. Fan type code D S AR AE

CJBX CJBX/AL. Options. Order code CJBX 15/15 4. Technical characteristics

Sabre Sickle Fan Assisted Roof Cowls (VSR)

Mixed Flow Roof Fans (RMH)

NCF fans 50 Hz. Protection class IP 55

NEW Acoustic In-Line Fans (ACQ)

Centriflow Plus EC. Technical data

TD-MIXVENT Series IN-LINE MIXED FLOW DUCT FANS TD-MIXVENT. In-Line duct fans

Centrifugal performance characteristics with axial flow pattern: RADAX VAR

Axial fans. What s more, non-stock models are normally available within two weeks.

CMP-L/EW B T D. Industrial Brushless Motors E.C. Motor power (CV) Three-phase VSD 400 V50/60 Hz. electrical power Maximum.

AC Commercial Fans Edition. ErP ready

MegaBox Product-specific information

Duct mounted fans. axial flow. Pacific HVAC Engineering Tel. Australia NZ

IN-LINE MIXED FLOW DUCT FANS MIXVENT-TD Fan Systems

HEAVY DUTY FANS FOR INDUSTRIAL APPLICATIONS

Energy-saving motors (ESM)

In-Line Fans. Roof Fans. Fans ATEX. Centrifugal Fans. Chip Extractors. Domestic Fans. Accessories. Electric Diagrams. General Information.

AXIAL FLOW CABINET FAN CGT Series

BPF. Centrifugal Plug Fans

Uniclass L7534. Manufacture controlled to ISO9001

ROOF MOUNTED FANS TH-MIXVENT Series Mixed Flow Fans TH-MIXVENT. Roof mounted fans. Flame retardant terminal box. Circular spigot coupling

BOX BLB Centrifugal Box Fan

CONTENTS. Page. Adjustable Axial Pitch Flow Fans 3. Dimensions 4. AP056 Performance Curves 5. AP056 Sound Performance 6. AP063 Performance Curves 7

Centrifugal medium-pressure fans fitted with multi-blade

Sentinel D-Box Single Fan

CMRT Series BACKWARD CURVED CENTRIFUGAL FANS. Backward curved centrifugal fans CMRT 80 C

Eco Mixed Flow (emf) Energy Saver. Terminal Box. Performance. Quality Assurance. Impellers. Accessories. Motors

Centrifugal fan with highly efficient EC drive motor

Specifications. Applications Ventilation of safety cabinets (STORM 10), scrubbers, fume capture arms, filter housing, etc. (STORM 12, 14, 16).

ErP POWERBOX EC FANS - ESTOC EC FEATURES ELECTRICAL SUPPLY TEMPERATURE RANGE SIZES FEATURES AND CONSTRUCTION PRODUCT CODE IMPELLER MOTOR

MAJAX-2 GENERAL SPECIFICATION

TURBOFLOW TF Contra Rotating Axial Flow Fan

ITEC High Efficiency EC Twin Fan for convenient fitting and full control. Casing constructed from 1.6mm Galvanised sheet steel

V.I.R.T.U.O. Ventilation boxes. Comfort ventilation boxes

Terminal Box Are to IP54, as standard, protected against dust and water from any angle allowing outside applications.

Medium Pressure Centrifugal Fans

NEW Slimpak EC Box Fan (SLPT EC)


Axial or tubular wall-mounted fans, PL version fitted with a plastic rotor and AL version with an aluminium rotor.

LPS IN-LINE CENTRIFUGAL ELECTRIC PUMPS. Your Life, our Quality. Worldwide. 118 Heating & Conditioning

Transcription:

Range of cylindrical cased axial fans fitted with aluminium impellers and manufactured from high grade rolled galvanised steel and protected against corrosion by cataforesis primer and black polyester paint finish. Fited with 2 contra rotating complementary impellers manufactured from die-cast aluminium. All models are supplied with pre-wired wiring junction box located on the outside of the fan casing for easy wiring access. Available with single or three phase 4 poles motors. Motors All the motors are IP65, Class F insulation (1), equipped with thermal protection. Single phase motors are variable voltage (Excepted TCBBX2/4-63). Three phase motors suitable for inverter control. Electrical supplies: Single phase 23V-5Hz (Capacitor located inside the wiring terminal box) Three phase 23/4V-5Hz. (1) Working temperatures from -4ºC up to 7ºC. Contra rotating: High pressure Contra rotating system with two complementary impellers allowing the duplication of the pressure with the same air volume. Corrosion resistance Rolled steel casings and motor support protected by cataforesis primer and black polyester paint finish. Stainless steel screws. Terminal box Wiring terminal box with cable gland PG-11. Impeller dynamically balanced Impellers are dynamically balanced, according to ISO 194 standard, giving vibration free operation. 1

TECHNICAL CHARACTERISTICS Before installation check that the product electrical characteristics listed on the data plate label (voltage, power, frequency, etc.) match those of the intended electrical supply. Speed (rpm) Diameter (mm) absorbed power (W) absorbed current (A) Sound pressure level* (db(a)) air volume (m 3 /h) Weight (kg) Speed controller RMB/T Variable frequency inverter VFTM VFKB to 23 V to 4 V 1/23V** 3/4V 1/23V** 3/4V SINGLE PHASE TCBBx2/4-45 142 45 1316 5,7 74 7.43 42 RMB-8 TCBBx2/4-5 137 5 1957 9, 9.95 5 RMB-1 TCBBx2/4-56 137 56 2972 13,6 13.93 66 TCBBx2/4-63 14 63 3671 16,3 16.56 8 THREE PHASE TCBTx2/4-45 143 45 139 5,2 3 74 7.25 42 RMT-5 VFTM MONO 1,1 VFTM TRI 1,1 VFKB 27 VFKB 45 TCBTx2/4-5 139 5 17 5,8 3,4 9.8 5 RMT-5 VFTM MONO 1,1 VFTM TRI 1,5 VFKB 27 VFKB 45 TCBTx2/4-56 139 56 3173 1, 5,8 15.17 66 VFTM MONO 2,2 VFTM TRI 3 VFKB 48 TCBTx2/4-63 1445 63 414-7,4 17.81 8 VFTM TRI 4 VFKB 48 * Sound pressure level, measured in free field condition at a distance equivalent of three times the diameter of the impeller or a minimum of 1.5 meters wichever is the greater. ** Only for fans fitted with three phase motors 23/4V. ACOUSTIC CHARACTERISTICS The sound levels NPS- shown in the technical characteristic chart, correspond to the value of sound pressure db(a), measured in free field conditions at a distance equivalent to three times the diameter of the impeller with a minimum of 1.5 meters. The following table shows the sound power level spectrums in db(a) measured with the fan ducted, at both inlet and discharge sides. 45 Inlet 45 Outlet 5 Inlet 5 Outlet Air volume m 3 /h 63 125 25 5 1 2 4 8 Global 6.6 46 73 85 82 85 72 64 9 5.85 46 73 84 81 83 71 64 88 4.3 58 7 8 8 83 71 64 87 6.6 63 86 85 87 82 74 67 92 5.85 53 73 85 84 87 81 74 67 91 4.3 58 7 82 83 86 82 74 67 9 9. 48 87 85 87 81 74 67 92 7.5 52 85 85 85 8 73 65 9 6. 6 73 83 82 85 8 73 66 89 9. 65 87 88 9 84 7 94 7.5 62 86 87 88 83 69 92 6. 59 72 86 85 88 83 69 92 56 Inlet 56 Outlet 63 Inlet 63 Outlet Air volume m 3 /h 63 125 25 5 1 2 4 8 Global 13.72 5 85 87 88 91 85 73 95 1.8 57 83 86 89 84 72 93 9. 63 81 86 89 84 72 92 13.72 74 86 85 91 94 88 81 97 1.8 7 82 84 88 92 87 81 74 95 9. 74 81 85 89 92 87 81 74 95 17.5 51 85 91 89 93 87 8 74 97 15.6 55 85 85 88 91 86 8 73 95 12. 64 8 84 88 9 86 8 73 94 17.5 73 87 88 93 95 89 83 99 15.6 71 87 86 91 94 89 83 98 12. 67 84 86 9 94 89 84 97 DIMENSIONS (mm) Ø A B Ø C Ø D Ø E Number of holes N 45 537 3 5 45 12 8 5 595 3 56 5 12 12 56 655 52 62 56 12 12 63 725 52 69 63 12 12 11

MOUNTING ACCESSORIES Flexible connector Wire guard Wire guard Flexible connector Duct Matching flange Mounting feet Matching flange Duct PERFORMANCE CURVES TCBBx2 / TCBTx2 EXAMPLE CURVE - qv: Air volume in m 3 /h and m 3 /s. - psf: Static pressure in Pa. - SFP: Specific fan power in W/m 3 /s. - P: Input power in W. - Measurement category: C or D depending on the models. - Efficiency category: Static or Total depending on the models. - Fan tested with inlet bellmouth. - Fan efficiency without VSD. - Air flow data in accordance with ISO 581. - Sound pressure level db(a), measured in a free field distance equal to 3 times the diameter, with a minimum of 1,5 m. 5 4 3 TCBBx2/4-5 3 2 2 23V MC Measurement category EC Efficiency category VSD Speed control: supplied with the fan SR Specific ratio h[%] Efficiency N Efficiency grade [kw] Absorbed power [m 3 /h] Air volume Static pressure [RPM] Speed 1 3 4 5 6 7 8 9 qv[m 3 /h] C Static No 1 45,1 49,6 1,957 6383 498 1394 1, 1,2 1,4 1,6 1,8 2, 2,2 2,4 2,6 1 qv[m 3 /s] 15 12 1 7 SFP 12

PERFORMANCE CURVES 4 POLE MOTOR 4 3 2 1 TCBBx2/4-45 TCBBx2/4-45 73 3 4 5 6 7 1, 1,2 1,4 1,6 1,8 2, 74 23V 2 15 1 5 1 8 7 6 5 SFP 5 4 3 2 1 TCBBx2/4-5 3 4 5 6 7 8 9 qv[m 3 /h] 1, 1,2 1,4 1,6 1,8 2, 2,2 2,4 2,6 3 2 1 qv[m 3 /s] 15 12 1 7 SFP 23V C Static No 1 41,9 47,5 1,316 4842 411 1349 C Static No 1 45,1 49,6 1,957 6383 498 1394 6 TCBBx2/4-56 7 TCBBx2/4-63 5 6 4 3 4 3 5 4 3 23V 4 3 2 23V 2 2 2 1 1 1 1 5 7 9 11 13 1,6 2, 2,4 2,8 3,2 3,6 4, 15 12 1 8 6 SFP 4 6 8 112 1416 1,5 2, 2,5 3, 3,5 4, 4,5 15 13 1 7 5SFP 81 C Static No 1 41,9 45,2 2,97 8741 513 1311 C Static No 1 42,4 45,2 3,665 1542 536 1285 13

PERFORMANCE CURVES 4 POLE MOTOR TCBTx2/4-45 TCBTx2/4-5 5 5 73 4 4 3 15 3 3 74 2 4V 1 2 2 1 5 1 4V 1 2 3 4 5 6 7,6,9 1,2 1,5 1,8 2,1 1 5 4 SFP 3 4 5 6 7 8 9 1, 1,2 1,4 1,6 1,8 2, 2,2 2,4 2,6 15 1 7 5 SFP C Static No 1 43, 48,6 1,39 4 432 13 D Total No 1 53,5 58,6 1,581 7145 427 1348 TCBTx2/4-56 TCBTx2/4-63 6 5 4 3 4 3 7 6 5 4 3 4V 4 3 2 4V 2 2 2 1 1 1 1 5 7 9 11 13 15 1,6 2, 2,4 2,8 3,2 3,6 4, 4,4 15 12 1 8 6 SFP 5 7 9 1113 1517 1,5 2, 2,5 3, 3,5 4, 4,5 5, 15 13 1 7 5 SFP 81 D Total No 1 55, 58,2 3,148 1254 611 1365 D Total No 1 54,2 56,8 3,93 12997 587 1387 14