Model 363 Control Valve

echnical Sales Bulletin February 0 P-363B0A Features Versatility Multiple port sizes make the 363 an easy valve to reconfigure when process applications change. Rugged Design Available severe service trim and high temperature configurations are well suited to more demanding applications. Low emperature Construction Standard Model 363 valves use LCC body material, and internals rated to -50 o F (-46 o C). High emperature Option he standard temperature rating of 450 o F (3 o C) can be extended to 850 o F (454 o C), with options available for higher temperatures. Cryogenic Service Option Figure 363 Control Valve he Model 363 control valve is part of the 360 Series of control Valves. he Model 363 is a top guided, unbalanced, single port valve that is suitable for either throttling or on off control of either liquids or gases. Metal to metal seating is standard on Model 363 valves with an option for soft seating. he standard actuator for the Model 363 control valve is a Dyna-Flo model DFC or DFO linear actuator. hese heavyduty actuators are spring return diaphragm style, and can be used for throttling or on-off service, with or without a valve positioner. he Model 363 control valves are manufactured to a high level of quality specifications to ensure superior performance and customer satisfaction. Optional materials and trim details make the 363 control valve a standard solution for ultra low temperatures. Full Pressure Drop Capabilities 363 control valves can shut off against inlet pressures equal to the ASME B6.34 rating. Sour Gas Service Capability here are standard construction materials that comply with the recommendations of the National Association of Corrosion Engineers (NACE) MR075. Shut Off Capability Shut off options are available from ASME / FCI Class II to Class VI. Flow Characteristic Selections Equal percentage, linear and quickopening flow characteristics available. Easy Maintenance As with all 360 Series Valves, the 363 can be serviced in line with no special tools required.

echnical Sales Bulletin February 0 P-363B0A Specifications Sizes and Connection Styles Models 363 Size:, -/, Rating: ASME 50 / 300 / 600 Connections: RF / RJ - All Sizes NP -, -/ and Maximum Inlet emperature and Pressures Flanged valves consistent with ASME B6.34 Class rating, unless limited by either material pressure or temperature limitations. Maximum Pressure Drops Maximum pressure drop is the same as maximum inlet pressure unless otherwise rated by a specific trim construction. See able 6. Standard Shut-off Classifications In accordance with ASME / FCI 70. -Model 363 - Standard Class IV - Metal Seat -Model 363 - Optional Class V - Metal Seat -Model 363 - Optional Class VI - Metal Seat See able for Optional Shut-off capability Dimensions Valve and Actuator Assembly Diagram See Figure Valve and Actuator Assembly Dimensions See able 3-6 Approximate Valve Body and Actuator Weights See able 7 Materials he standard body material is LCC. he standard bonnet material is LF or LCC. CF8M (36 SS) is an option. See able 7 for typical construction materials. See ables 8 for trim selections. Cross-Section of Model 363 Control Valves See Figure 3 Flow Characteristics Standard trim is equal percent. Other flow characteristics are available upon request. Model 363 valves normally flow up. Port Diameters and Maximum Valve Plug ravel See able Packing ype he Standard packing is PFE V-ring. Live-loaded low emission, graphite and other packing arrangements are available. See Figure 8 for packing diagrams. Valve Sizing Coefficients See ables 0-6 Actuator Sizing Fail Open Actuator See able 8 Fail Close Actuator See able 9 rim Style Service Application See able 8

echnical Sales Bulletin February 0 P-363B0A Valve Shut-off Configurations able Valve Model Size (inch) Shut Off Capabilities Valve Plug Guide Seat 363, -/ & Class IV Unbalanced op Metal, -/ & Optional Class V Unbalanced op Metal, -/ & Optional Class VI Unbalanced op Metal Model 363 Port Diameters, Valve Plug ravel, Stem and Yoke Boss Diameter able Valve Size Port Diameter Max Valve Plug ravel Inch mm Inch mm, -/ & Dyna-Form /4 6 9 Dyna-Form 3/8 0 9 Dyna-Form / 3 9 Dyna-Form 9 9 Full Port 5 9 -/ Full Port -/ 38 9 -/ Reduced Port 5 9 -/ Dyna-Form 3/8 0 9 -/ Dyna-Form / 3 9 -/ Dyna-Form 9 9 Full Port 5 -/8 9 Reduced Port 5 9 Dyna-Form /4 6 9 Dyna-Form 3/8 0 9 Dyna-Form / 3 9 Dyna-Form 9 9 3

echnical Sales Bulletin February 0 P-363B0A able 3 Model 363 Port Diameters, Valve ravel and Mounting Connection Valve Size inch Port Diameter inch (mm) Equal Percentage Linear Quick Open Max Valve ravel inch (mm) Valve Stem and Mounting Connection Diameter inch (mm) Standard Optional Stem Yoke Boss Stem Yoke Boss 3/6 (4.8) /4 (6.4) 3/8 (9.5) / (.7) (5.4) (5.4) (9.) 3/8 (9.5) -/8 (54) / (.7) -3/6 (7) (9.) (5.4) 3/6 (4.8) /4 (6.4) -/ 3/8 (9.5) / (.7) (9.) -/ (38.) -/ (38.) (9.) 3/8 (9.6) -/8 (54) / (.7) -3/6 (7) (5.4) -/ (38.) 3/6 (4.8) /4 (6.4) 3/8 (9.5) / (.7) (9.) (50.8) (50.8) -/8 (9) / (.7) -3/6 (7) (9.) 3-9/6 (90) (5.4) -/ (38.) (50.8) - Port Diameters /4 - inch (6.4-9. mm) use Dyna-Form valve plugs. - Also available in 3-flute Dyna-Flute valve plugs. 4

echnical Sales Bulletin February 0 P-363B0A to Regular Bonnet Valve Assembly with Actuator Envelope Dimensions Inches (mm) (Refer to Figure ) able 4 Valve End Actuator A B C D E Size (inch) Connection Size DFO DFC ASME 50 069 7.5 (84).38 (60) 5.00 (7) 4.6 (65) 7.60 (700) 3. (333) ASME 300 069 7.75 (97).38 (60) 5.00 (7) 4.6 (65) 7.60 (700) 3. (333) ASME 600 069 8.5 (0).38 (60) 5.00 (7) 4.6 (65) 7.60 (700) 3. (333) NP 069 8.5 (0).38 (60) 5.00 (7) 4.6 (65) 7.60 (700) 3. (333) ASME 50 069 8.75 ().8 (7) 4.88 (4) 4.48 (6) 7.48 (697) 3. (333) -/ ASME 300 069 9.5 (35).8 (7) 4.88 (4) 4.48 (6) 7.48 (697) 3. (333) ASME 600 069 9.88 (5).8 (7) 4.88 (4) 4.48 (6) 7.48 (697) 3. (333) NP 069 9.88 (5).8 (7) 4.88 (4) 4.48 (6) 7.48 (697) 3. (333) ASME 50 069 0.00 (54) 3.06 (78) 6.50 (65) 8.0 (74) 9.88 (759) 3. (333) ASME 50 05 0.00 (54) 3.06 (78) 6.50 (65) 3.44 (84) 36.75 (933) 6.00 (406) ASME 300 069 0.50 (67) 3.06 (78) 6.50 (65) 8.0 (74) 9.88 (759) 3. (333) ASME 300 05 0.50 (67) 3.06 (78) 6.50 (65) 3.44 (84) 36.75 (933) 6.00 (406) ASME 600 069.5 (86) 3.06 (78) 6.50 (65) 8.0 (74) 9.88 (759) 3. (333) ASME 600 05.5 (86) 3.06 (78) 6.50 (65) 3.44 (84) 36.75 (933) 6.00 (406) ASME 600 56.5 (86) 3.06 (78) 6.50 (65) 3.44 (84) 36.75 (933) 8.6 (473) NP 069.5 (86) 3.06 (78) 6.50 (65) 8.0 (74) 9.88 (759) 3. (333) NP 05.5 (86) 3.06 (78) 6.50 (65) 3.44 (84) 36.75 (933) 6.00 (406) NP 56.5 (86) 3.06 (78) 6.50 (65) 3.44 (84) 36.75 (933) 8.6 (473) to Extension Bonnet Dimensions (Styles and ) (Refer to Figure ) able 5 Valve Style Style Size (inch) Stem Diameter inch (mm) 3/8 (9.5) / (.7) 3/8 (9.5) / (.7) 8.38 (3) 9.88 (5).94 (303).56 (39).5 8.5 (0) 9.75 (48).8 (300).44 (36) --- 0.50 (67) --- 8.3 (465) D Valve Size & Style Style (Actuator Stem Diameter inch (mm) Model) 3/8 (9.5) / (.7) 3/8 (9.5) / (.7) DFC DFO DFC DFO DFC DFO DFC DFO inch (069) 30.98(787) 7.98(7) 3.48(85) 9.48(749) 34.54(877) 3.54(80) 35.6(893) 3.6(87).5 inch (069) 30.85(784) 7.85(707) 3.35(8) 9.35(745) 34.4(874) 3.4(798) 35.04(890) 3.04(84) inch (069) --- --- 33.90(86) 3.0(85) --- --- 4.7(059) 39.9(04) inch (05) --- --- 40.80(036) 36.40(95) --- --- 48.6(35) 44.(3) inch (56) --- --- 39.90(03) 36.30(9) --- --- 47.7() 44.(0) C 5

echnical Sales Bulletin February 0 P-363B0A to Bellows Bonnet Dimensions (Refer to Figure ) able 6 C D Valve Size & (Actuator Model) Stem Diameter inch (mm) DFC DFO / (.7) Inch (mm) Inch (mm) inch (069).6 (3) 36.0 (95) 34. (869).5 inch (069).50 (37) 35.90 (9) 34.0 (866) inch (069) 5. (384) 38.5 (978) 36.7 (933) inch (05) 5. (384) 45.4 (,54) 4.0 (,04) inch (56) 5. (384) 44.5 (,3) 40.9 (,039) F E D C F Dimension:, -/ Valve 5.00 (7 mm) 6.88 (75 mm) B A Figure Valve Assembly with DFC Actuator Outline Dimensions 6

echnical Sales Bulletin February 0 P-363B0A ypical Construction Materials able 7 Part Description Standard Construction NACE Construction BODY ASM (A35 LCC), ASM (A35 CF8M) SA35 Gr LCC BONNE SA350 LF / A35 LCC SA350 LF / A35 LCC SA35 Gr CF8M* SA35 Gr CF8M BAFFLE 3S600 S3600 BELLOWS BONNE S3603 / N0665 (INCONEL 65) S3600 / N0665 (INCONEL 65) PACKING BOX RING S3600 S3600 PACKING SPRING S30400 N/A SPRING WASHERS N0778 (INCONEL 78) N0778 (INCONEL 78) O-RING HNBR HNBR LANERN RING - S3600 SPECIAL WASHER S30400 N/A GUIDE BUSHING CARBON GRAPHIE N/A V-RING PACKING SE PFE PFE (Double) PACKING RIBBON GRAPHIE GRAPHIE PACKING FILAMEN GRAPHIE GRAPHIE PACKING FOLLOWER S3600 S3600 PACKING FLANGE 00 / Zinc 00 / ZINC UPPER WIPER FEL FEL LOWER WIPER EFLON EFLON S4600 PLUG / S090 SEM N/A VALVE PLUG / SEM ASS Y S3600 PLUG / S090 SEM S3600 PLUG / S090 SEM S3600-CoCr-A PLUG / S090 SEM S3600-CoCr-A PLUG / 090 SEM VALVE PLUG ADAPER S3600 S3600 PIN SEEL SEEL S4600 N/A SEA RING S3600-CoCR-A S3600-CoCr-A S3600 S3600 SEA RING REAINER SA35 Gr CF8M* SA35 Gr CF8M* REAINER BUSHING S3600-CoCr-A S3600-CoCr-A S7400 DH 50 S7400 DH 50 PACKING FLANGE CARBON SEEL-PLAED CARBON SEEL-PLAED PACKING NU SA-94 H SA-94 H PACKING SUD SA-93 B7 SA-93 B7 BONNE NU SA-94 H SA-94 HM BONNE SUD SA-93 B7 SA-93 B7M S7400 DH 50* (600 ASME Class) S7400 DH 50* (600 ASME Class) GASKES GRAPHIE / S3600 GRAPHIE / S3600 SPIRAL WOUND GASKE S30400 / GRAPHIE S30400 / GRAPHIE SHIM S3600 S3600 SEM SE SCREW SS SS SEM SCREW REAINER SS SS * Optional construction material See tables for service limits 7

echnical Sales Bulletin February 0 P-363B0A Figure 3 Cross-section of 363 Series Control Valve with rim Details BODY O BONNE SEAING DEAIL PACKING SUD PACKING NU PACKING FLANGE YOKE NU PLUG / SEM ASS'Y SEM WIPER PACKING FOLLOWER GASKE SHIM SPIRAL WOUND GASKE LANERN RING BONNE BONNE SUD BONNE NU LOWER WIPER V-RING PACKING SE PACKING BOX RING BODY SEA RING REAINER SEA RING SEA RING SEAING DEAIL CAGE SEA RING DYNA-FLO MODEL 363 CONROL VALVE NACE CONSRUCION CROSS SECION SEA RING GASKE BODY 8

echnical Sales Bulletin February 0 P-363B0A VALVE SEM PACKING SUD PACKING NU O-RING Figure 4 Model 363 Extension Bonnet Cross Section PACKING FLANGE SPRING WASHERS PACKING FOLLOW LANERN RING V-RING PACKING SE PACKING BOX RING Figure 5 Valve Plug Style Diagrams *NOE - plug styles continued on Page 0. EQUAL PERCENAGE EXENSION BONNE BONNE SUD BAFFLE BONNE NU DYNA-FLA LINEAR PLUG PIN VALVE PLUG Z 9

echnical Sales Bulletin February 0 P-363B0A Figure 6 Model 363 Bellows Bonnet Cross Section BELLOWS BONNE SEM ASSEMBLY For Bellows Bonnet valves 50-300 Class maximum pressure is 300 Psig at 350 o F. Figure 7 Valve Plug Style Diagrams QUICK OPEN PACKING SUD PACKING NU PACKING FLANGE LANERN RING O-RING SPRING WASHERS LIVE LOADED PACKING FOLLOWER V-RING PACKING SE PACKING BOX RING DYNA-FORM SEM SE SCREW SEM SCREW REAINER BELLOWS BONNE PIPE PLUG BONNE SUD BONNE NU DYNA-FLUE BELLOWS BONNE GASKE ADAPER PIN PLUG PIN BELLOWS BONNE SEM ASSEMBLY PLUG ADAPER VALVE PLUG 0

echnical Sales Bulletin February 0 P-363B0A Figure 8 Model 363 Packing Style Diagrams PACKING FLANGE PACKING FLANGE LIVE LOADED PACKING FOLLOWER O-RING SPRING WASHERS LIVE LOADED PACKING FOLLOWER O-RING SPRING WASHERS GRAPHIE PACKING RINGS GUIDE BUSHING LANERN RING YPICAL LIVE LOADED PACKING WIH PFE V-RING PACKING SES YPICAL LIVE LOADED PACKING WIH GRAPHIE PACKING RINGS GRAPHIE PACKING RINGS WASHER SPRING GRAPHIE PACKING RINGS SANDARD HIGH EMPERAURE PACKING DIAGRAM SANDARD SINGLE PFE PACKING DIAGRAM

echnical Sales Bulletin February 0 P-363B0A rim Options able 8 rim Spec Valve Plug Stem Seat Ring Retainer Seat Ring Guide Bushing Service Z S4600 Hardened S090 CF8M S4600 S7400 DH 50 Standard Z 3600 S090 CF8M 36 SS S7400 DH 50 NACE Z3 S3600 w/ CoCr-A Hardfacing Seat S090 CF8M 36 SS w/alloy 6 Hardfacing Seat S7400 DH 50 NACE / Errosive Z4* S3600 w/ CoCr-A Hardfacing Seat and Guide S090 CF8M S3600 w/ CoCr-A Hardfacing Seat and Bore CoCr-A NACE / High emperature / Errosive Z5 S3600 / ungsten Carbide S090 CF8M S3600 w/ CoCr-A Hardfacing Seat and Bore S7400 DH 50 NACE * NOE: Z4 rim for -/ & Bodies with, -/ & Ports have a hard face seat only. able 9 rim Style Service Application rim Spec Body Material Shut Off Class Maximum Shutoff Pressure Drop @ 00 o F () Psig (kpag) Minimum emperature o F ( o C) Maximum emperature o F ( o C) Z LCC IV or V,500 (0,34) -0 (-9) 650 (343) LCI,500 (0,34) -0 (-9) 450 (3) Z LCC IV or V,500 (0,34) -50 (-45) 650 (343) LCI,500 (0,34) -50 (-45) 450 (3) CF8M IV or V,500 (0,34) -50 (-0) 700 (37) Z3 / Z4 LCC IV or V,500 (0,34) -50 (-45) 700 (37) CF8M IV or V,500 (0,34) -50 (-0) 700 (37) () Actuator sizing is also a contributing factor for Maximum Shutoff. NOE: For Bellows Bonnet valves 50-300 Class maximum pressure is 300 Psig at 350 o F.

echnical Sales Bulletin February 0 P-363B0A Models 363 Valve Sizing Coefficients, Equal Percentage rim able 0 Valve Size Port ravel Co-efficient Percentage of Valve ravel Inches Inches (mm) Inches (mm) 0% 0% 30% 40% 50% 60% 70% 80% 90% 00% Equal Percentage 0.80.5.80.50 3.6 5.6 7.60 0.5.5 3. X (5.4) (9.) 0.64 0.635 0.598 0.58 0.58 0.594 0.647 0.676 0.755 0.885 0.95 0.793..90.95 4.6 6.44 9.8 6.3.0 8.0 -/ -/ X (38.) (9.) 0.75 0.674 0.73 0.644 0.587 0.556 0.598 0.65 0.775 0.839 0.96 0.766..76.56 3.65 5.5 8.8.0 5.0 7. -/ X (5.4) (9.) 0.65 0.67 0.600 0.603 0.560 0.533 0.56 0.574 0.70 0.860 0.98.64.60 4.8 6.60.0 0.5 3.7 44.5 49.8 53.5 -/8 X (50.8) (8.6) 0.653 0.580 0.5 0.557 0.550 0.57 0.65 0.798 0.90 0.898 0.95.0.49.03.76 3.88 5.56 8.5.5 4. 5.7 X (5.4) (9.) 0.597 0.63 0.600 0.576 0.569 0.55 0.5 0.543 0.669 0.90 0.9 Relationships of note: C =39.76 X C G = C K M = Models 363 Valve Sizing Coefficients, Quick Opening rim able Valve Size Port ravel Co-efficient Percentage of Valve ravel Inches Inches (mm) Inches (mm) 0% 0% 30% 40% 50% 60% 70% 80% 90% 00% Quick Opening Plug 4.35 0. 3.9 5.5 6.0 6.6 6.7 6.8 6.9 6.9 X (5.4) (9.) 0.400 0.450 0.5 0.537 0.535 0.50 0.500 0.500 0.490 0.494 0.93 5.6.8 0.5 7. 30.5 3. 33. 33.5 34.0 34. -/ -/ X (38.) (9.) 0.6 0.734 0.76 0.8 0.84 0.855 0.860 0.860 0.853 0.848 0.95 4.5 8.93 4.5 7. 8. 8.6 8.8 9.0 9. 9.3 -/ X (5.4) (9.) 0.65 0.790 0.79 0.904 0.95 0.95 0.9 0.95 0.905 0.879 0.90 3.0 30. 44. 5.3 56. 57.6 58.4 58.4 58.6 58.6 -/8 X (50.8) (9) 0.546 0.66 0.765 0.8 0.86 0.83 0.83 0.835 0.83 0.83 0.93 4.35 9.76 4.7 6.5 7. 7.5 7.5 7.5 7.8 7.8 X (5.4) (9.) 0.5 0.595 0.695 0.876 0.935 0.94 0.958 0.958 0.94 0.94 0.85 Relationships of note: C =39.76 X C G = C K M = 3

echnical Sales Bulletin February 0 P-363B0A Models 363 Valve Sizing Coefficients, Linear rim able Valve Size Port ravel Co-efficient Percentage of Valve ravel Inches Inches (mm) Inches (mm) 0% 0% 30% 40% 50% 60% 70% 80% 90% 00% Linear Plug.0 3.86 5.7 6.55 8. 9.80..0 3. 3.5 (5.4) (9.) X 0.636 0.600 0.636 0.63 0.636 0.630 0.635 0.680 0.768 0.83 0.95 4.00 7.5. 4.6 8.6.5 5.6 9.0 3. 3.9 -/ -/ X (38.) (9.) 0.634 0.650 0.656 0.690 0.67 0.67 0.695 0.70 0.756 0.87 0.95.95 3.40 4.95 6.0 7.7 9. 0.8 3.0 5.0 6.6 -/ X (5.4) (9.) 0.497 0.577 0.600 0.690 0.65 0.654 0.636 0.64 0.78 0.795 0.95 6.06.7 8.0 4.0 30.0 36. 4.7 49.7 5.0 5. -/4 X (50.8) (9) 0.560 0.64 0.655 0.674 0.700 0.73 0.776 0.77 0.860 0.9 0.94.87 3.40 4.95 6.47 8.04 9.65..76 4.34 5.5 X (5.4) (9.) 0.607 0.59 0.596 0.6 0.60 0.65 0.64 0.63 0.750 0.909 0.94 Relationships of note: C =39.76 X C G = C K M = Models 363 Valve Sizing Coefficients, Dyna-Flute rim able 3 Valve Size Port ravel Co-efficient Percentage of Valve ravel Inches Inches (mm) Inches (mm) 0% 0% 30% 40% 50% 60% 70% 80% 90% 00% Dyna-Flute Plug - Flute, -/ & /4 (6.4) (9.) 0.038 0.046 0.055 0.07 0.094 0. 0.60 0.0 0.77 0.354 X 0.776 0.73 0.688 0.65 0.640 0.633 0.635 0.63 0.630 0.656 0.86 Dyna-Flute Plug - 3 Flutes, -/ & /4 (6.4) (9.) 0.056 0.073 0.00 0.45 0.5 0.30 0.43 0.586 0.800.06 X 0.690 0.646 0.638 0.65 0.600 0.585 0.595 0.6 0.60 0.6 0.90 Relationships of note: C =39.76 X C G = C K M = 4

echnical Sales Bulletin February 0 P-363B0A Models 363 Valve Sizing Coefficients, Dyna-Form rim able 4 Valve Size Port ravel Co-efficient Percentage of Valve ravel Inches Inches (mm) Inches (mm) 0% 0% 30% 40% 50% 60% 70% 80% 90% 00% Dyna-Form Plug 0.088 0.4 0.75 0.36 0.37 0.464 0.64 0.88..5, -/ /4 or (6) (9) X 0.77 0.77 0.658 0.645 0.60 0.585 0.596 0.596 0.603 0.647 0.88 0.88 0.88 0.88 0.88 0.88 0.88 0.88 0.88 0.88 0.9 0.99 0.308 0.448 0.6 0.88.9.8.43 3.07 3/8 (0) (9) X 0.747 0.663 0.64 0.593 0.569 0.568 0.560 0.57 0.64 0.66 0.89 0.89 0.89 0.89 0.89 0.89 0.89 0.89 0.89 0.89 0.89 0.39 0.49 0.735.08.53..99 4.7 4.9 / (3) (9) X 0.78 0.639 0.68 0.59 0.573 0.585 0.600 0.68 0.645 0.803 0.93 0.93 0.93 0.93 0.93 0.93 0.93 0.93 0.93 0.93 0.374 0.6 0.965.47.7 3.5 4.57 6.5 8.7 8.84 (9) (9) X 0.687 0.64 0.588 0.560 0.57 0.596 0.603 0.64 0.750 0.99 0.97 0.97 0.97 0.97 0.97 0.97 0.97 0.97 0.97 0.97 0. 0.9 0.30 0.435 0.600 0.864.6.80.56 3.0 -/ & 3/8 (0) (9) X 0.95 0.763 0.699 0.657 0.640 0.64 0.608 0.596 0.594 0.648 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.84 0.99 0.33 0.503 0.735.07.54.4 3.08 4.36 5.8 -/ & / (3) (9) X 0.748 0.686 0.640 0.67 0.67 0.60 0.607 0.607 0.573 0.705 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.434 0.683.00.49. 3.8 4.6 6.73 8.88 0. -/ & (9) (9) X 0.747 065 0.636 0.596 0.578 0.603 0.593 0.59 0.680 0.796 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 Relationships of note: C =39.76 X C G = C K M = Models 363 Valve Sizing Coefficients, Dyna-Flat rim able 5 Valve Size Port ravel Co-efficient Percentage of Valve ravel Inches Inches (mm) Inches (mm) 0% 0% 30% 40% 50% 60% 70% 80% 90% 00% Dyna-Flute Plug - Flat Angle O 55 (Refer to Figure 5 Angle Z), -/ & 3/6 (4.8) (9.) 0.038 0.046 0.055 0.07 0.094 0. 0.60 0.0 0.77 0.354 X 0.776 0.73 0.688 0.65 0.640 0.633 0.635 0.63 0.630 0.656 0.86 Dyna-Flute Plug - Flat Angle 3 O 5 (Refer to Figure 5 Angle Z), -/ & 3/6 (4.8) (9.) 0.056 0.073 0.00 0.45 0.5 0.30 0.43 0.586 0.800.06 X 0.690 0.646 0.638 0.65 0.600 0.585 0.595 0.6 0.60 0.6 0.90 Relationships of note: C =39.76 X C G = C K M = 5

echnical Sales Bulletin February 0 P-363B0A Models 363 Valve Sizing Coefficients (C v ), Bellows Bonnet with Live Loaded Packing able 6 Valve Size Bellows ravel Full Size rim Restricted rim Inch Inch (mm) Equal Percentage Linear Quick Open Equal Percentage Linear 0.56 (4.) 9.5.6 6.8 --- --- --- Quick Open -/ 0.56 (4.) 3. 7.5 33.6 0.0.0 9.0 0.88 (.) * 38.8 46. 58.5 5.9 5.7 7.9 * - ravel for Restricted rim 0.75 inch (9. mm) Relationships of note: C =39.76 X C G = C K M = NOE: For Bellows Bonnet valves 50-300 Class maximum pressure is 300 Psig at 350 o F. able 7 Valve Body and Actuator Assembly Approximate Weights Valve Body With Fail Open Assembly With Fail Closed Assembly Size Only Actuator Weight Actuator Weight (inch) lb (Kg) Size lb (Kg) Size lb (Kg) 30 (4) DFO - 069 70 (3) DFC - 069 78 (6) -/ 45 (0) DFO - 069 85 (39) DFC - 069 93 (4) 85 (39) DFO - 069 36 (6) DFC - 069 35 (6) DFO - 05 67 (76) DFC - 05 65 (75) DFO - 56 9 (87) DFC - 56 06 (94) Our Commitment of Quality Dyna-Flo is committed to continuous improvement. All efforts have been taken to maximize the accuracy of this information. Without notification, product specifications and designs may be modified at any time. he issue of this document is for information only, and does not imply suitability, a warranty, or guarantee for a specific service. 6

echnical Sales Bulletin February 0 P-363B0A Model 363 Fail Open Actuator Maximums 6 to 30 psig signal, 35 psig supply Metal Seat, Single PFE Packing Class IV Shut Off able 8 Valve Size Port Size Actuator Sizes (inch) Inch (mm) DFO - 069 DFO - 069 DFO - 05 DFO - 56 Pressure Drop Psig (kpag) /4 (6.4),500 (0,34) N/A N/A N/A 3/8 (9.5),500 (0,34) N/A N/A N/A / (.7),500 (0,34) N/A N/A N/A (9.),500 (0,34) 3 N/A N/A N/A (5.4),440 (9,98) 4 N/A N/A N/A -/ /4 (6.4),500 (0,34) N/A N/A N/A 3/8 (9.5),500 (0,34) N/A N/A N/A / (.7),500 (0,34) N/A N/A N/A (9.),500 (0,34) N/A N/A N/A (5.4),440 (9,98) 4 N/A N/A N/A / (38.) 63 (4,6) 4 N/A N/A N/A /4 (6.4) N/A,500 (0,34) N/A N/A 3/8 (9.5) N/A,500 (0,34) N/A N/A / (.7) N/A,500 (0,34) N/A N/A (9.) N/A,500 (0,34) 3 N/A N/A (4.4) N/A 750 (5,7) 3,500 (0,34) 5 N/A (50.8) N/A 90 (,999) 6 N/A 845 (5,86) 4 Bench Set Psig (kpag) 6-30 (4-07) 6-6 (4-79) 3 6-0 (4-38) 4 6-4 (4-97) 5 6-8 (4-4) 6 6-5 (4-03) Please contact Dyna-Flo for higher shut off class, PFE seating, or graphite packing. 7

echnical Sales Bulletin February 0 P-363B0A Model 363 Fail Close Actuator Maximums 6 to 30 Psig signal, 35 Psig supply Metal Seat, Single PFE Packing Class IV Shut Off able 9 Valve Size Port Size Actuator Sizes (inch) Inch (mm) DFC - 069 DFC - 069 DFC - 05 DFC - 56 Pressure Drop Psig (kpag) /4 (6.4),500 (0,34) N/A N/A N/A 3/8 (9.5),500 (0,34) N/A N/A N/A / (.7),500 (0,34) N/A N/A N/A (9.),500 (034) N/A N/A N/A (5.4),38 (9,56) 3 N/A N/A N/A / /4 (6.4),500 (0,34) N/A N/A N/A 3/8 (9.5),500 (0,34) N/A N/A N/A / (.7),500 (0,34) N/A N/A N/A (9.),500 (0,34) N/A N/A N/A (5.4),38 (9,56) 3 N/A N/A N/A / (38.) 55 (3,806) 3 N/A N/A N/A /4 (6.4) N/A,500 (0,34) N/A N/A 3/8 (9.5) N/A,500 (0,34) N/A N/A / (.7) N/A,500 (0,34) N/A N/A (9.) N/A,500 (0,34) 3 N/A N/A (5.4) N/A 750 (5,7) 3,500 (0,34) 3 N/A (50.8) N/A N/A 90 (,999) 5 64 (4,46) 4 Bench Set Psig (kpag) 6-30 (4-07) 8-30 (4-07) 3 4-30 (97-07) 4 5-30 (03-07) 5-30 (8-07) Please contact Dyna-Flo for higher shut off class, PFE seating, or graphite packing. 8

echnical Sales Bulletin February 0 P-363B0A Ordering Guide Dyna-Flo Model Numbering System Sample Part Number 363 - AFL - 0P - ES4 - O O 4 S Code O Description Cleaned and Package for O service Shut-off Class 4 Class IV - Standard Metal Seat 5 Class V - Optional Metal Seat 6 Class VI - Optional Metal Seat Bonnet Style S Standard E Extension B Bellows X Special Characteristic E E Equal Percentage L Linear Q Quick Open F 3 Flute Dyna-Flute M Dyna-Form G Flute Dyna-Flute D Dyna-Flat X Special Valve Mounting Connection -/8 (3/8 stem) -3/6 (/ stem) 3 3-9/6 ( stem) Packing Style P P Spring Loaded PFE V-ring J Jam Style PFE V-ring G Graphite High emp Live Loaded (PFE) L Live Loaded (Graphite) rim Number Z 3 Z3 Z 4 Z4 5 Z5 0 Port Size 0 3/6 0 /4 04 / 06 -/ 6 03 3/8 08 Bolting - - B7 / H A B7M / HM B B8M / 8M C 7-4 DH 50 Body Material L F A L LCC W WCC M CF8M Connection Style F RF J RJ N NP ASME Rating A 50 B 300 C 600 Valve Size inch 5 -/ inch inch 9

Have you seen what else Dyna-Flo has to offer? 4000 Pressure Controller he Dyna-Flo 4000 Series pneumatic pressure controllers are the brains of a self contained, local pneumatic PID control loops. he pressure controller detects the process pressure using a Bourdon tube. he process pressure is then compared to an operator manually adjusted set point, which in turn modulates the controller output. he controller pneumatic output is connected to a final control device, typically a control valve, that changes the process pressure. Siemens PS Positioner he PS is a digital smart valve positioner with onboard programming and HAR ready. It has a visual LCD screen for visual programming and diagnostics, which means the PS does not require a handheld. DF40 ungsten Carbide rim A ungsten Carbide trim option is available for the DF40 control valve. Be sure to remember ungsten Carbide for the DF40 in a severe service application. Siemens 760 Positioner he 760 is a pneumatic positioner and can be used with linear motion or rotary valves. Additional components can be added, such as a 4-0 ma module, internal limit switches, high flow CV module, or position indicator windows. Visit www.dynaflo.com for more product information