BARRIER-FREE SHOWER FLAT WALL ROLL-IN MODEL Rough-In Dimensions SHFW-WX-6235 62 wide x deep x 76- high Finished Dimensions 62 wide x deep x 7 high Unit Features l One - Piece Fiberglass Composite Construction l Sanitary Grade Polyester Gelcoat Surface l 3-3/8 Dia. Center Drain (see reverse side for location) l To Aid In Keeping Water Within Confines of Unit l Contoured Threshold To Aid Entry And Exit l Expanded Entry Wall Minimizes Transfer Space l 1 Floor To Secure Unit Along Threshold l Flat Wall Design To Accommodate Grab Bar & Seat Applications l Textured Floor Pattern Special Notes l Factory Applied Packages Available l Factory Applied Bar Configurations Available l Factory Applied ADA & ANSI Compliant Bar & Seat Packages Available 155
BARRIER-FREE SHOWER Order No.: SHFW-WX-6235 62 x (60 x 30 interior dimension), one-piece gelcoated fiberglass, flat-wall shower stall with expanded shower entry wall reveal, 1/2-inch high maximum finished threshold, floor attachment flange, wall surround, and center drain. Flat wall design allows for the installation of grab bars and seat. 1 34 Frame Pocket 17-1/2 34 Inside 3-3/8 Dia. Drain 17-1/2 1 Nailing 1 Wide Floor 31 31 Nailing Back (Long) Wall 74-76- Floor Room Side Wide Threshold Structural Core Structural Core 1/2 High Threshold Composite WX Expanded Entry Top View Interior wall surface 1 Offset resulting from top attachment flange Wall framing Floor Contoured Threshold Profile Filler Strip Exterior front, room-side wall reveal Underlayment & wall finish material Vertical attachment flange 156
FH (Fair Housing wall reinforcement) Package Includes: Factory applied,, HUD-FHA compliant (Fair Housing), structurally reinforced wall areas for independent field application of bars. 37-1/2 32 w x 10 h 58 w x 10 h 32 w x 10 h TLRF-RS or LS (2-wall bar & RH or LH seat reinforcement) Package Includes: Factory applied,, HUD-FHA compliant (Fair Housing), structurally reinforced wall areas for independent field application of bars and seat.. NOTE: RS or LS designates RH or LH reinforced seat wall. Right (Control) Wall Left (Seat) Wall 37-1/2 32 w x 10 h 58 w x 10 h 32 w x 24 h 157
TLRF-DS (3-wall bar & 2-wall seat reinforcement) Package Includes: Factory applied,, 3-wall horizontal bar reinforcement and 2-wall seat reinforcement exceeding (HUD/ FHA) Fair Housing requirements for the independent field application of bars and seat. NOTE: Factory installed component packages available with listed reinforcement. 58 w x 10 h 3SM (3-side, mid-level wall reinforcement) Package Includes: Factory applied,, 3-side, mid-level, structurally reinforced wall areas, exceeding Fair Housing (HUD/ FHA) requirements. NOTE: Factory installed component packages available with listed reinforcement. 5-1/2 8 w x 32 h 37-1/2 8 w x 32 h 58 w x 36 h 158
3SF (3-side, full-wall reinforcement) Package Includes: Factory applied,, 3-side, full-wrap, structurally reinforced wall areas, exceeding Fair Housing (HUD/ FHA) requirements, for the independent field application of bars and seat. NOTE: Factory installed component packages available with listed reinforcement. 5-1/2 5-1/2 32 w x 68 h 58 w x 68 h 32 w x 68 h 2BAR-(R or L) (2-wall / 2-bar only package) 2BAR-(R or L) WHT ( dia., white powder coat, 2-wall / 2-bar only package) 2BAR-(R or L) OFW ( dia., off-white powder coat, 2-wall / 2-bar only package) 2BAR-(R or L) SNK ( dia., satin nickel, 2-wall / 2-bar only package) Package Includes: Factory installed,, 2-bar package with a single horizontal bar across the control wall and back wall, and reinforcement for a seat opposite the control wall. NOTE: R or L designates RH or LH control wall. NOTE: Enhanced reinforcement available with listed component package. Right (Seat) Wall Left (Control) Wall 6 36 Bar 2-1/2 32 w x 24 h 159
ICC ANSI A-117.1-2009 ICC ANSI A-117.1-2009 ADA-RI (3-wall bar only package) Package Includes: Factory installed, 3-wall horizontal bar package with shower curtain rod in compliance with 2010 ADA and ANSI A117.1-2009 requirements. NOTE: Enhanced reinforcement available with listed component package. NOTE: Shower curtain rod may be deleted upon request without affecting compliance. 2010 ADA Standards 2 Shower Rod 2-1/2 6 48 Bar 6 34-1/4 34-1/4 2-1/2 ADA/TL-(RS or LS) (2-bar & folding seat package) Package Includes: Factory installed, 1-1/2 dia. stainless steel, 2-bar and folding seat package with shower curtain rod in compliance with 2010 ADA and ANSI A117.1-2009 requirements. NOTE: RS or LS designates seat wall. NOTE: Enhanced reinforcement available with listed component package. NOTE: Shower curtain rod may be deleted upon request without affecting compliance. 2010 ADA Standards Right (Seat) Wall 2 Shower Rod 53-1-1/2 3 29-1/2 18 Seat Ht. 6 36 Bar 13-1/2 Fold-Up Seat 16-1/4 18 Seat Ht. 2-1/2 Photographic images may include optional components and appear different than actual product. Dimensions shown are maximum. Due to the nature of the materials involved, actual unit dimensions can vary (tolerances: +/-1/8 inch) Oasis reserves the right to modify or discontinue product and/or associated equipment without prior written or verbal notification or obligation. 160 SHFWWX6235.00.011516