Bonney orge The Name You Trust for orged Steel Valves Bonney orge's forged steel valves and piping components have led the way for over eighty years in state-ofthe-art design and dependable performance. It is qualities like these, combined with a customer-driven culture, that maintains Bonney orge's leadership position within the industry for exceeding customer expectations. Our goal is to make Bonney orge your number one worldwide choice for forged valves. ORIN HED O THE REST The Industry's Widest Range of orged Steel Valves Bonney orge s forged steel valve range includes carbon steel, alloys, stainless steel, and exotic alloys. Valve types include gate, globe and check with ratings of 50 lbs. to 4500 lbs. There are also bellows sealed valves, cryogenic valves for temperatures to -3 (-96 ) and valves with extended bodies. ll available from one source! Production apabilities that Meet Your Demands Bonney orge is an integrated supplier with in-house forging, machining and assembly-test operations. Our forge shop contains a complete line of forging and support equipment, including a forge die shop, all located in one modern facility. utomated production lines and next generation machining systems offer high volume capabilities with uncompromising quality. Quality That You an ount On Bonney orge products are manufactured and tested in strict accordance to STM, SME, NSI, PI and other applicable industry codes and specifications. hemical and mechanical properties of all Bonney orge products are fully traceable to the original forging lot and raw material heat. Our extensive quality control system carefully monitors our manufacturing processes to assure a product that performs to the highest industry standards. Quality assurance procedures include 00% hydrostatic and pneumatic testing of all valves in full conformance to applicable PI standards and industry codes. Bonney orge has earned ISO 900 designation through uncompromising, company-wide controls. We re Here for You This catalog offers a vast amount of product information and specifications. In the event that you need additional information or technical assistance please call our friendly and knowledgeable customer service personnel at -800-3-0655 or visit our web site at www.bonneyforge.com.
3
HOW TO ORDER/SPEIY ORED STEEL VLVES. Specify Valve Size. Select Valve Description from Section 3. Select Valve Type desired from Section B 4. Indicate Body/Bonnet and Trim Material from Section 5. Select End onfiguration from Section D 6. Select Special Requirement(s) from Section E 7. Specify as a Suffix String, after Section D or E, any Body/Bonnet Material, Trim Material or Special Requirements not listed below SETION - VLVE DESRIPTION H ull Port, 800#, Bolted Bonnet HL onventional Port, 800#, Bolted Bonnet W ull Port, 800#, Welded Bonnet WL onventional Port, 800#, Welded Bonnet 9H ull Port, 500#, Bolted Bonnet 9HL onventional Port, 500#, Bolted Bonnet H9R ull Port, 500#, RTJ Bolted Bonnet 5HR ull Port, 500#, RTJ Bolted Bonnet 9W ull Port, 500#, Welded Bonnet 9WL onventional Port, 500#, Welded Bonnet 5W ull Port, 500#, Welded Bonnet 45W ull Port, 4500#, Welded Bonnet Y ull Port, 800#, Y-Pattern Body, Welded Bonnet 9Y ull Port, 500#, Y-Pattern Body, Welded Bonnet 690Y ull Port, 690#, Y-Pattern Body, Welded Bonnet 5Y ull Port, 500#, Y-Pattern Body, Welded Bonnet 680Y ull Port, 680#, Y-Pattern Body, Welded Bonnet 45Y ull Port, 4500#, Y-Pattern Body, Welded Bonnet 50# Integral lange, ull Port, Bolted Bonnet 3 300# Integral lange, ull Port, Bolted Bonnet 6 600# Integral lange, ull Port, Bolted Bonnet 5 500# Integral lange, ull Port, Bolted Bonnet 5 500# Integral lange, ull Port, Bolted Bonnet L 50# Integral lange, onventional Port, Bolted Bonnet L3 300# Integral lange, onventional Port, Bolted Bonnet L6 600# Integral lange, onventional Port, Bolted Bonnet ryogenic, ull Port, 800#, Bolted Bonnet L ryogenic, onventional Port, 800#, Bolted Bonnet W ryogenic, ull Port, 800#, Welded Bonnet WL ryogenic, onventional Port, 800#, Welded Bonnet 9 ryogenic, ull Port, 500#, Bolted Bonnet 9L ryogenic, onventional Port, 500#, Bolted Bonnet 9W ryogenic, ull Port, 500#, Welded Bonnet 9WL ryogenic, onventional Port, 500#, Welded Bonnet 4
HOW TO ORDER/SPEIY ORED STEEL VLVES SETION - VLVE DESRIPTION (ONT.) L W WL 3 3L 3W 3WL 6 6L 6W 6WL 5 5W S SL SHW SHWL 9S 9SL 9SHW 9SHWL 5SHW S SL SHW SHWL 3S 3SL 3SHW 3SHWL 6S 6SL 6SHW 6SHWL 5S 5SHW VOLL VOL VLL VL ryogenic, 50# Integral lange, ull Port, Bolted Bonnet ryogenic, 50# Integral lange, onventional Port, Bolted Bonnet ryogenic, 50# Integral lange, ull Port, Welded Bonnet ryogenic, 50# Integral lange, onventional Port, Welded Bonnet ryogenic, 300# Integral lange, ull Port, Bolted Bonnet ryogenic, 300# Integral lange, onventional Port, Bolted Bonnet ryogenic, 300# Integral lange, ull Port, Welded Bonnet ryogenic, 300# Integral lange, onventional Port, Welded Bonnet ryogenic, 600# Integral lange, ull Port, Bolted Bonnet ryogenic, 600# Integral lange, onventional Port, Bolted Bonnet ryogenic, 600# Integral lange, ull Port, Welded Bonnet ryogenic, 600# Integral lange, onventional Port, Welded Bonnet ryogenic, 500# Integral lange, ull Port, Bolted Bonnet ryogenic, 500# Integral lange, ull Port, Welded Bonnet Bellows Sealed, ull Port, 800#, Bolted Bonnet Bellows Sealed, onventional Port, 800#, Bolted Bonnet Bellows Sealed, ull Port, 800#, Welded Bonnet Bellows Sealed, onventional Port, 800#, Welded Bonnet Bellows Sealed, ull Port, 500#, Bolted Bonnet Bellows Sealed, onventional Port, 500#, Bolted Bonnet Bellows Sealed, ull Port, 500#, Welded Bonnet Bellows Sealed, onventional Port, 500#, Welded Bonnet Bellows Sealed, ull Port, 500#, Welded Bonnet Bellows Sealed, 50# Integral lange, ull Port, Bolted Bonnet Bellows Sealed, 50# Integral lange, onventional Port, Bolted Bonnet Bellows Sealed, 50# Integral lange, ull Port, Welded Bonnet Bellows Sealed, 50# Integral lange, onventional Port, Welded Bonnet Bellows Sealed, 300# Integral lange, ull Port, Bolted Bonnet Bellows Sealed, 300# Integral lange, onventional Port, Bolted Bonnet Bellows Sealed, 300# Integral lange, ull Port, Welded Bonnet Bellows Sealed, 300# Integral lange, onventional Port, Welded Bonnet Bellows Sealed, 600# Integral lange, ull Port, Bolted Bonnet Bellows Sealed, 600# Integral lange, onventional Port, Bolted Bonnet Bellows Sealed, 600# Integral lange, ull Port, Welded Bonnet Bellows Sealed, 600# Integral lange, onventional Port, Welded Bonnet Bellows Sealed, 500# Integral lange, ull Port, Bolted Bonnet Bellows Sealed, 500# Integral lange, ull Port, Welded Bonnet Valvolet Extended Body, Lip End, onventional Port, 800#, Welded Bonnet Valvolet Extended Body, O Let End, onventional Port, 800#, Welded Bonnet Valvolet Extended Body, Lip End, onventional Port, 800#, Bolted Bonnet Valvolet Extended Body, O Let End, onventional Port, 800#, Bolted Bonnet 5
HOW TO ORDER/SPEIY ORED STEEL VLVES (ONT.) SETION - VLVE DESRIPTION (ONT.) 9VOLL 9VOL 9VLL 9VL ML ML 9ML 9ML Valvolet Extended Body, Lip End, onventional Port, 500#, Welded Bonnet Valvolet Extended Body, O Let End, onventional Port, 500#, Welded Bonnet Valvolet Extended Body, Lip End, onventional Port, 500#, Bolted Bonnet Valvolet Extended Body, O Let End, onventional Port, 500#, Bolted Bonnet Extended Body, onventional Port, 800#, Welded Bonnet Extended Body, onventional Port, 800#, Bolted Bonnet Extended Body, onventional Port, 500#, Welded Bonnet Extended Body, onventional Port, 500#, Bolted Bonnet SETION B- VLVE TYPE ate 3 lobe 3R lobe with renewable seats 4 Piston heck 4R Piston heck with renewable seats 5 Ball heck 5R Ball heck with renewable seats 6 Swing heck SETION - BODY/BONNET, TRIM MTERIL 05, Trim 6/H, (PI Trim #8) 05, Trim 6/H, (PI Trim #5) 3 05, Trim 36/H, (PI Trim #) 3 05, Trim 36/H 4 05, Trim Monel 500, (PI Trim #9) 4S 05, Trim Monel 500/H (PI Trim #) 4 05, Trim Monel 500/H 5, Trim 6/H, (PI Trim #8) 5, Trim 6/H, (PI Trim #5) 6 5, Trim 6/H, (PI Trim #8) 6 5, Trim 6/H, (PI Trim #5) 7 304, Trim 304/H 7 304, Trim 304/H 7L 304L, Trim 304/H 7L 304L, Trim 304/H 7H 304H, Trim 304/H 7H 304H, Trim 304/H 8 36, Trim 36/H, (PI Trim #) 8 36, Trim 36/H 8L 36L, Trim 36/H, (PI Trim #) 8L 36L, Trim 36/H 8H 36H, Trim 36/H, (PI Trim #) 8H 36H, Trim 36/H 6
HOW TO ORDER/SPEIY ORED STEEL VLVES SETION - BODY/BONNET, TRIM MTERIL (ONT.) 9, Trim 6/H, (PI Trim #8) 9, Trim 6/H, (PI Trim #5) 9, Trim 6/H, (PI Trim #8) 9, Trim 6/H, (PI Trim #5) LS L, Trim 6/H, (PI Trim #8) L L, Trim 6/H, (PI Trim #5) L3S L, Trim 36/H, (PI Trim #) L3 L, Trim 36/H 0 Other, to be specified or an item not listed above, a figure number can be determined from the following. Body/Bonnet Material irst ode Number/Letter Trim Material Second ode Letter 05 6/H S L L 6/H 304/H 7 5 6 304/H 7 9 36/H 3 9 K 36/H 3 9 37/H B 5 37/H B 3/H E 304, 304L, 304H 7, 7L, 7H 3/H E 36, 36L, 36H 8, 8L, 8H 347/H 37, 37L B, BL 347/H 3, 3H E, EH 44 J 347, 347H, H 44/H JS 44 J 44/H J 5 D lloy 0 5/H DS Monel 400 M4 5/H D Monel 500 M5 lloy 0 Hastelloy B HB lloy 0/H S Hastelloy H lloy 0/H Inconel 800 I800 Monel 400 M4 Inconel 85 I85 Monel 400/H M4S Monel 400/H M4 Monel 500 M5 5 D Monel 500/H M5S Monel 500/H M5 7
HOW TO ORDER/SPEIY ORED STEEL VLVES (ONT.) SETION - BODY/BONNET, TRIM MTERIL (ONT.) Body/Bonnet Material irst ode Number/Letter Trim Material Second ode Letter Hastelloy B HB Hastelloy B/H HBS Titanium T Hastelloy B/H HB Hastelloy H Ha stelloy /H Hastelloy /H Inconel 800/H Inconel 800/H Inconel 85/H Inconel 85/H Titanium/H Titanium/H HS H I I N N T T Examples: " onventional Port, 800#, Bolted Bonnet, ate, 05, lloy 0/H Trim, Threaded Ends ig. No. " HL--T 3/4" onventional Port, 500#, Welded Bonnet, lobe, 5, 36/H Trim, Socket Weld Ends ig. No. 3/4" 9WL-363-SW SETION D- END ONIURTION T = Threaded SW = Socket Weld SW/T = Socket Weld Inlet x Threaded Outlet T/SW = Thread Inlet x Socket Weld Outlet BW = Butt Weld P = Plain End R = langed, Raised ace RTJ = langed, Ring Type Joint = lat ace inish S = Smooth ace inish N = Nipples, ustomer Specify SETION E- SPEIL REQUIREMENTS SME Section I NE Oxygen Service Hydrogen Service PMI Special Packing/askets Other ustomer Specify 8
Overview... 0 Bolted Bonnet ate- 800 lb. & 500 lb. valves... Bolted Bonnet ate- 500 lb. & 500 lb. valves... Welded Bonnet ate- 800 lb. & 500 lb. valves... 3 Welded Bonnet ate- 500 lb. & 4500 lb. valves... 4 TE VLVES 9
OVERVIEW TE VLVES orged steel, outside screw and yoke (OS&Y), rising stem, non-rising handwheel. ull or conventional port. Bolted or welded bonnet joint. Integral backseat. 9 0 5 8 3 4 7 6. BODY. The body is forged steel and designed to the basic dimensional requirements of the applicable specifications such as PI 60 and SME B6.34. The body is available in both the full or conventional port design.. BONNET. The bonnet is forged steel, has an integral backseat and incorporates the stuffing box, which has dimensions per the applicable specifications such as PI 60. 3. BODY-BONNET JOINT. Two different bonnet joint designs are available. These are either the bolted bonnet or the threaded and seal welded type. 4. SKET. The bolted bonnet joint design valve uses a contained, controlled compression, spiral wound type gasket. 5. BONNET BOLTIN. The bonnet bolting is manufactured of alloy steel in accordance with the requirements of the applicable specifications such as PI 60 and SME B6.34. 6. SET RINS. The seat rings are steel and makeup part of the valve trim. They are pressed into the valve body and wedged into place, forming a seal with the body. The seating surfaces are ground and lapped. 7. WEDE. The wedge, which is solid design, is forged or investment cast steel and is part of the valve trim. The seating surfaces are ground and lapped. 0 8. STEM. The stem is forged steel and part of the valve trim. It contains an integral back seat shoulder, which mates with the integral backseat of the bonnet. The stem is designed to the basic dimensional requirements of the applicable specifications such as PI 60. 9. LND ND LNE. The gland, gland flange assembly utilizes a separate, two piece design. This self aligning design allows the flange to be unevenly tightened while the gland maintains it s parallel alignment with the stem and stuffing box. 0. LND BOLTS ND NUTS. The steel/stainless steel gland bolt and nut assembly is a stud, double nut arrangement. This design allows complete removal from the valve when service is required. The use of industry standard thread full length studs and nuts also allows easy replacement should these items be lost or in need of replacement.. YOKE SLEEVE. The yoke sleeve is of forged stainless steel material having a high melting point and is resistant to wear and corrosion.. HNDWHEEL. The handwheel is forged carbon steel of an open spoke design. This robust construction along with appropriate sizing allows for ease of operation.
TE VLVES- BOLTED BONNET- ULL & REDUED PORT 800 LB. 500 LB. Design construction: PI 60 - SME B6.34 - BS 535 Testing according to PI 598 Marking MSS SP5 Outside Screw and Yoke (OS&Y) Self aligning two piece packing gland Spiral-wound gasket Integral backseat Socket Weld Ends to SME B6. Screwed Ends (NPT) to SME B.0. Butt Welding Ends to SME B6.5 Ratings: - carbon steel class 800 975 psig @ 00 38 bar + 38 - carbon steel class 500 3705 psig @ 00 55 bar + 38 800 LB. 500 LB. ULL PORT I. H 0 inch mm /4 6 3/8 0 / 5 3/4 0 5 /4 3 / 40 50 inch 3.5 3.5 3.54 4.33 5 5 5.8 6 mm 80 80 90 0 7 7 34 5 inch 5.98 5.98 6. 7.7 8.86 0.04.4 4.09 mm 5 5 58 96 5 55 90 358 inch 3.46 3.46 3.46 3.8 5.43 5.43 5.43 6.77 mm 88 88 88 97 38 38 38 7 inch.3.38.55.7.94.8.48.83 mm 8 9,6 4 8 4 30 36,5 46,5 inch.6.6.50.89.0.5 3.07 3.35 mm 3 3 38 48 56 64 78 85 lb. 4.5 4.5 5 8.5 3 6.5 8.3 7.5 kg,,,3 3,7 5,9 7,4 8,3,5 PKIN BH BH BH BH4 BH5 BH6 BY5 BH8 SKET 3 4 6 0 ULL PORT I. 9H 0 inch /4 3/8 / 3/4 /4 / mm 6 0 5 0 5 3 40 50 inch 3.54 3.54 4.33 5 5 5 5 8.7 mm 90 90 0 7 7 7 7 0 inch 6.0 6.0 7.48 8.66 9.84.0.4 3.58 mm 53 53 90 0 50 8 90 345 inch 3.46 3.46 3.8 5.43 5.43 5.43 5.43 6.77 mm 88 88 97 38 38 38 38 7 inch.3.38.55.7.94.8.48.89 mm 8 9,6 4 8 4 30 36,5 48 inch.50.50.89.0.5 3.07 3.07 3.35 mm 38 38 48 56 64 78 78 85 lb. 5.5 5.5 9 3.75 7.5 3 4.5 44 kg,4,4 4, 6, 8 0,5 0 PKIN BH3 BH3 BH5 BH6 B4 BY7 B5 9B8 SKET 3 4 5 7 8 800 LB. 500 LB. REDUED PORT I. HL 0 inch mm / 5 3/4 0 5 / 40 50 inch 3.5 3.54 4.33 5 5.8 mm 80 90 0 7 34 inch 5.98 6. 7.7 0.04.4 mm 5 58 96 55 90 inch 3.46 3.46 3.8 5.43 5.43 mm 88 88 97 38 38 inch.38.55.7.8.48 mm 9,6 4 8 30 36,5 inch.6.5.89.5 3.07 mm 3 38 48 64 78 lb. 4.5 5 7.75 6 6.75 kg,9,3 3,6 7,3 7.6 PKIN BH BH BH4 BH6 BY5 SKET 3 6 REDUED PORT I. 9HL 0 inch / 3/4 / mm 5 0 5 40 50 inch 3.54 4.33 5 5 8.7 mm 90 0 7 7 0 inch 5.98 7.48 8.66.0 3.58 mm 5 90 0 8 345 inch 3.46 3.8 5.43 5.43 5.43 mm 88 97 38 38 38 inch.38.55.7.8.48 mm 9,6 4 8 30 36,5 inch.5.89.0 3.07 3.35 mm 38 48 56 78 85 lb. 5.5 8.5 3.5 3.75 45.5 kg,4 3,9 6, 0,8 0,5 PKIN BH3 BH5 BH6 B5 BH8 SKET 3 5 7 Materials and trim specifications Page 9
TE VLVES- BOLTED BONNET- ULL PORT 500 LB. 500 LB. Design construction: SME B6.34 - BS 535 Outside Screw and Yoke (OS&Y) Self aligning two piece packing gland Integral backseat Oval ring joint gasket Socket Weld Ends to SME B6. Screwed Ends (NPT) to SME B.0. Butt Welding Ends to SME B6.5 Ratings standard class: - carbon steel class 500 3705 psig @ 00 55 bar + 38 - carbon steel class 500 670 psig @ 00 45 bar + 38 500 LB. ULL PORT I. H9R 0 inch mm / 5 3/4 0 5 /4 3 / 40 50 inch 4.33 5.9 5.9 8.7 8.7 9.06 mm 0 50 50 0 0 30 inch 9.7.38.54 4.06 4.4 7.76 mm 33 89 93 357 366 45 inch 5.43 5.43 5.43 6.77 6.77 9. mm 38 38 38 7 7 34 inch.55.7.94.6.44.89 mm 4 8 4 9,5 36,6 48 inch.5.7.7.95.95 3.6 mm 38 55 55 75 75 9 lb. 0.5 0.5 44 44 79.5 kg 5 9, 9, 0 0 36 PKIN B3 B4 B4 B5 B5 9B8 SKET R R7 R7 R0 R0 R4 500 LB. ULL PORT I. 5HR 0 inch / 3/4 / mm 5 0 5 40 50 inch 5.9 5.9 8.7 9.06 9.06 mm 50 50 0 30 30 inch.0.3 3.70 5.98 7.0 mm 8 87 348 406 437 inch 5.43 5.43 6.77 9. 9. mm 38 38 7 34 34 inch.45.59.77.0.38 mm,5 5 9,5 8 35 inch.7.7.95 3.6 3.6 mm 55 55 75 9 9 lb. 48.5 8.5 79.5 kg 0 0 37 36 PKIN B4 BH8 BH8 9B8 5B8 SKET R6 R6 R7 R0 R Materials and trim specifications Page 9
TE VLVES- WELDED BONNET- ULL & REDUED PORT 800 LB. 500 LB. Design construction: PI 60 - SME B6.34 - BS 535 Testing according to PI 598 Marking MSS SP5 Outside Screw and Yoke (OS&Y) Self aligning two piece packing gland Integral backseat Body Bonnet Weld to SME IX Socket Weld Ends to SME B6. Screwed Ends (NPT) to SME B.0. Butt Welding Ends to SME B6.5 Ratings: - carbon steel class 800 975 psig @ 00 38 bar + 38 - carbon steel class 500 3705 psig @ 00 55 bar + 38 SEL WELD 800 LB. ULL PORT I. W 0 inch /4 3/8 / 3/4 /4 / mm 6 0 5 0 5 3 40 50 inch 3.5 3.5 3.54 4.33 5 5 5 8.7 mm 80 80 90 0 7 7 7 0 inch 5.98 5.98 6. 7.7 8.86 0.04.4 4.09 mm 5 5 58 96 5 55 90 358 inch 3.46 3.46 3.46 3.8 5.43 5.43 5.43 6.77 mm 88 88 88 97 38 38 38 7 inch.3.38.55.7.94.8.44.89 mm 8 9,6 4 8 4 30 36,6 48 inch.6.6.5.89.0.5 3.07 3.35 mm 3 3 38 48 56 64 78 85 lb. 3.5 3.5 4.5 7.75 4.5 0.75 35.5 kg,5,5 3,5 5 6,5 9,5 6 PKIN BH BH BH BH4 BH5 BH6 BY5 BH8 800 LB. REDUED PORT I. WL 0 inch / 3/4 / mm 5 0 5 40 50 inch 3.5 3.54 4.33 5 5 mm 80 90 0 7 7 inch 5.98 6. 7.7 0.04.4 mm 5 58 96 55 90 inch 3.46 3.46 3.8 5.43 5.43 mm 88 88 97 38 38 inch.38.55.7.8.44 mm 9,6 4 8 30 36,6 inch.6.5.89.5 3.07 mm 3 38 48 64 78 lb. 3.5 3.75 6.5 3.5 8 kg,6,8,9 6, 8, PKIN BH BH BH4 BH6 BY5 500 LB. ULL PORT I. 9W 0 inch /4 3/8 / 3/4 /4 / mm 6 0 5 0 5 3 40 50 inch 3.54 3.54 4.33 5 5 5 5 8.7 mm 90 90 0 7 7 7 7 0 inch 6.0 6.0 7.48 8.66 9.84.0.4 3.58 mm 53 53 90 0 50 8 90 345 inch 3.46 3.46 3.8 5.43 5.43 5.43 5.43 6.77 mm 88 88 97 38 38 38 38 7 inch.3.38.55.7.94.8.44.89 mm 8 9,6 4 8 4 30 36,6 48 inch.5.5.89.0.5 3.07 3.07 3.35 mm 38 38 48 56 64 78 78 85 lb. 4.5 4.5 7.5.5 5.5 3 4.75 kg,0,0 3,4 5, 7 0 0,5 9 PKIN BH3 BH3 BH5 BH6 B4 BY7 B5 B8 Materials and trim specifications Page 9 3 500 LB. REDUED PORT I. 9WL 0 inch / 3/4 / mm 5 0 5 40 50 inch 3.54 4.33 5 5 8.7 mm 90 0 7 7 0 inch 6.0 7.48 8.66.0 3.58 mm 53 90 0 8 345 inch 3.46 3.8 5.43 5.43 5.43 mm 88 97 38 38 38 inch.38.55.7.8.44 mm 9,6 4 8 30 36,6 inch.5.89.0 3.07 3.35 mm 38 48 56 78 85 lb. 4.5 7.5.5.5 40.5 kg 3,3 5,3 9,8 8,3 PKIN BH3 BH5 BH6 B5 BH8
TE VLVES- WELDED BONNET- ULL PORT 500 LB. 4500 LB. Design construction: SME B6.34 Outside Screw and Yoke (OS&Y) Self aligning two piece packing gland Integral backseat Body Bonnet Weld to SME IX Socket Weld Ends to SME B6. Screwed Ends (NPT) to SME B.0. Butt Welding Ends to SME B6.5 Ratings standard class: - carbon steel class 500 670 psig @ 00 45 bar + 38 - carbon steel class 4500 00 psig @ 00 765 bar + 38 500 LB. ULL PORT I. 5W 0 inch /4 3/8 / 3/4 /4 / mm 6 0 5 0 5 3 40 50 inch 4.33 4.33 5 5 5 5 8.7 9.06 mm 0 0 7 7 7 7 0 30 inch 7.0 7.0 8.43 9.6 0.87 0.87 3.7 5.9 mm 83 83 4 44 76 76 337 404 inch 3.8 3.8 5.43 5.43 5.43 5.43 6.77 9. mm 97 97 38 38 38 38 7 34 inch.3.3.45.59.77.98.0.38 mm 8 8,5 5 9,5 5 8 35 inch.89.89.0.5 3.07 3.07 3.35 3.74 mm 48 48 56 64 78 78 85 95 lb..5.5.75 5.75.5.5 43 63.75 kg 5, 5,3 5,4 7, 9,8 9,8 9,5 9 PKIN B4 B4 B4 BH8 BH8 B5 B5 B8 4500 LB. ULL PORT I. 45W 0 inch / 3/4 / mm 5 0 5 40 50 inch 5 5 9.06 9.06 7.76 mm 7 7 30 30 45 inch 0.39 0.83 4.37 5.75 7.56 mm 64 75 365 400 446 inch 5.43 6.6 9..60.60 mm 38 68 34 30 30 inch.30.45.59.0.0 mm 7,5,5 5 6 6 inch 3.07 3.07 3.74 3.74 4.7 mm 78 78 95 95 0 lb. 6.5 40.8 59.5 8.5 kg 0 8,5 7 37 PKIN B3 BH6 BY7 B8 4B8 vailable with Socket Weld or Butt-Weld Ends Only. Materials and trim specifications Page 9 4
Overview... 6 Bolted Bonnet- 800 lb. & 500 lb. valves... 7 Bolted Bonnet- 500 lb. & 500 lb. valves... 8 Welded Bonnet- 800 lb. & 500 lb. valves... 9 Welded Bonnet- 500 lb. & 4500 lb. valves... 0 Welded Bonnet (Y type)- 800 lb. & 690 lb. valves... Welded Bonnet (Y type)- 680 lb. & 4500 lb. valves... LOBE VLVES 5
OVERVIEW LOBE VLVES orged steel, outside screw and yoke (OS&Y), rotating rising stem, rising handwheel. ull or conventional port. Bolted or welded bonnet joint. T-Pattern or Y-Pattern. Integral backseat. Integral body seat. 9 0 5 8 3 4 7 6. BODY. The body is forged steel and designed to the basic dimensional requirements of the applicable specifications such as PI 60 and SME B6.34. The body is available in both the full or conventional port design. It is also available in either T-pattern or Y-pattern configuration.. BONNET. The bonnet is forged steel, has an integral backseat and incorporates the stuffing box, which has dimensions per the applicable specifications such as PI 60. 3. BODY-BONNET JOINT. Two different bonnet joint designs are available. These are either the bolted bonnet or the threaded and seal welded type. 4. SKET. The bolted bonnet joint design valve uses a contained, controlled compression, spiral wound type gasket. 5. BONNET BOLTIN. The bonnet bolting is manufactured of alloy steel in accordance with the requirements of the applicable specifications such as PI 60 and SME B6.34. 6. SET. The body seat is an integral weld overlay and is part of the valve trim. 7. DIS. The disc is forged steel and is part of the valve trim. The disc seating surface is of the tapered or plug type design. The disc is attached to the stem using a loose or swivel disc arrangement. 8. STEM. The stem is forged steel and part of the valve trim. It contains an integral back seat shoulder, which mates with the integral backseat of the bonnet. The stem is designed to the basic dimensional requirements of the applicable specifications such as PI 60. 9. LND ND LNE. The gland, gland flange assembly utilizes a separate, two piece design. This self aligning design allows the flange to be unevenly tightened while the gland maintains its parallel alignment with the stem and stuffing box. 0. LND BOLTS ND NUTS. The steel/stainless steel gland bolt and nut assembly is a stud, double nut arrangement. This design allows complete removal from the valve when service is required. The use of industry standard thread full length studs and nuts also allows easy replacement should these items be lost or in need of replacement.. YOKE SLEEVE. The yoke sleeve is of forged stainless steel material having a high melting point and is resistant to wear and corrosion.. HNDWHEEL. The handwheel is forged carbon steel of an open spoke design. This robust construction along with appropriate sizing allows for ease of operation. 6
LOBE VLVES- BOLTED BONNET- ULL & REDUED PORT 800 LB. 500 LB. Design construction: SME B6.34 - BS 535 Testing according to PI 598 Marking MSS SP5 Outside Screw and Yoke (OS&Y) Self aligning two piece packing gland Spiral-wound gasket Integral backseat Loose solid disc Socket Weld Ends to SME B6. Screwed Ends (NPT) to SME B.0. Butt Welding Ends to SME B6.5 Ratings: - carbon steel class 800 975 psig @ 00 38 bar + 38 - carbon steel class 500 3705 psig @ 00 55 bar + 38 800 LB. ULL PORT I. H 30 inch /4 3/8 / 3/4 /4 / mm 6 0 5 0 5 3 40 50 inch 3.5 3.5 3.54 4.33 5 6 7.09 8.7 mm 80 80 90 0 7 50 80 0 inch 6.54 6.54 6.73 8.39 9.7 0.6.8 4.76 mm 66 66 7 3 47 58 300 375 inch 3.46 3.46 3.46 3.8 5.43 5.43 6.77 6.77 mm 88 88 88 97 38 38 7 7 inch.8.35.5.69.89.6.38.79 mm 7 9 3 7,5,5 9,5 35 45,5 inch.6.6.5.89.0.5 3.07 3.35 mm 3 3 38 48 56 64 78 85 lb. 4.75 4.75 5.5 8.5 3.5 6.75 7.5 43.5 kg,,,4 3,8 6, 7,6,5 9,6 PKIN BH3 BH3 BH3 BH5 BY5 BY5 BY7 BH8 SKET 3 4 6 7 9 800 LB. REDUED PORT I. HL 30 inch / 3/4 / mm 5 0 5 40 50 inch 3.5 3.54 4.33 6 7.09 mm 80 90 0 50 80 inch 6.54 6.73 8.39 0.6.8 mm 66 7 3 58 300 inch 3.46 3.46 3.8 5.43 6.77 mm 88 88 97 38 7 inch.35.5.69.6.38 mm 9 3 7,5 9,5 35 inch.6.5.89.5 3.07 mm 3 38 48 64 78 lb. 4.5 5 8 6.5 6.5 kg,,3 3,7 7,4,9 PKIN BH3 BH3 BH5 BY5 BY7 SKET 3 6 7 500 LB. ULL PORT I. 9H 30 inch /4 3/8 / 3/4 /4 / mm 6 0 5 0 5 3 40 50 inch 3.54 3.54 4.33 5 6 7.09 8.7 9.06 mm 90 90 0 7 50 80 0 30 inch 6.54 6.54 8.7 9.7 0.08.8 4.76 6.85 mm 66 66 0 47 56 300 375 48 inch 3.46 3.46 3.8 5.43 5.43 6.77 6.77 9. mm 88 88 97 38 38 7 7 34 inch.8.35.47.59.79.06.6.57 mm 7 9 5 0 7 3 40 inch.5.5.89.0.5 3.07 3.35 3.74 mm 38 38 48 56 64 78 85 95 lb. 5.75 5.75 9.5 4.5 8.75 7.5 49 79.5 kg,6,6 4, 6,5 8,5,5,3 36 PKIN BH3 BH3 BH5 B4 B4 B5 BH8 9B8 SKET 3 4 5 7 8 Materials and trim specifications Page 9 7 500 LB. REDUED PORT I. 9HL 30 inch / 3/4 / mm 5 0 5 40 50 inch 3.54 4.33 5 7.09 8.7 mm 90 0 7 80 0 inch 6.54 8.7 9.84.8 4.76 mm 66 0 50 300 375 inch 3.46 3.8 5.43 6.77 6.77 mm 88 97 38 7 7 inch.35.47.59.06.6 mm 9 5 7 3 inch.5.89.0 3.07 3.35 mm 38 48 56 78 85 lb. 5.5 8.75 4.5 8.5 48.5 kg,4 4 6,5 3 PKIN BH3 BH5 B4 B5 BH8 SKET 3 5 7
LOBE VLVES- BOLTED BONNET- ULL PORT 500 LB. 500 LB. Design construction: SME B6.34 - BS 535 Testing according to PI 598 Marking MSS SP55 Outside Screw and Yoke (OS&Y) Self aligning two piece packing gland Integral backseat Oval ring joint gasket Loose solid disc Socket Weld Ends to SME B6. Screwed Ends (NPT) to SME B.0. Butt Welding Ends to SME B6.5 Ratings standard class: - carbon steel class 500 3705 psig @ 00 55 bar + 38 - carbon steel class 500 670 psig @ 00 45 bar + 38 500 LB. 500 LB. ULL PORT I. H9R 30 inch mm / 5 3/4 0 5 / 40 50 inch 4.33 5.9 5.9 8.7 9.06 mm 0 50 50 0 30 inch 9.53.0.0 4.57 8.3 mm 4 30 30 370 465 inch 5.43 5.43 5.43 6.77 9. mm 38 38 38 7 34 inch.47.59.75.6.57 mm 5 9 3 40 inch.5.7.7.95 3.74 mm 38 55 55 75 95 lb. 46.5 79.5 kg 5 0 0 36 PKIN B3 B4 B4 B5 B8 SKET R R7 R7 R0 R4 ULL PORT I. 5HR 30 inch mm / 5 3/4 0 5 / 40 50 inch 5.9 5.9 8.7 9.06 9.06 mm 50 50 0 30 30 inch.97.97 4.5 7.7 7.7 mm 304 304 36 436 436 inch 5.43 5.43 5.43 9. 9. mm 38 38 38 34 34 inch.43.57.75.0.5 mm 4,5 9 8 38 inch.7.7.95 3.74 3.74 mm 55 55 75 95 95 lb. 48.5 83.75 83.75 kg 0 0 38 38 PKIN B4 B4 BH8 B8 4B8 SKET R6 R6 R7 R0 R0 Materials and trim specifications Page 9 8
LOBE VLVES- WELDED BONNET- ULL & REDUED PORT 800 LB. 500 LB. Design construction: SME B6.34 - BS 535 Testing according to PI 598 Marking MSS SP5 Outside Screw and Yoke (OS&Y) Self aligning two piece packing gland Integral backseat Body bonnet weld to SME IX Loose solid disc Socket Weld Ends to SME B6. Screwed Ends (NPT) to SME B.0. Butt Welding Ends to SME B6.5 Ratings: - carbon steel class 800 975 psig @ 00 38 bar + 38 - carbon steel class 500 3705 psig @ 00 55 bar + 38 800 LB. ULL PORT I. W 30 inch /4 3/8 / 3/4 /4 / mm 6 0 5 0 5 3 40 50 inch 3.5 3.5 3.54 4.33 5 5.9 7.09 8.7 mm 80 80 90 0 7 50 80 0 inch 6.54 6.54 6.73 8.39 9.7 0..8 4.76 mm 66 66 7 3 47 58 300 375 inch 3.46 3.46 3.46 3.8 5.43 5.43 6.77 6.77 mm 88 88 88 97 38 38 7 7 inch.8.35.5.69.89.6.38.77 mm 7 9 3 7,5,5 9,5 35 45 inch.6.6.5.89.0.5 3.07 3.35 mm 3 3 38 48 56 64 78 85 lb. 3.75 3.75 4.5 6.5 4.75 4.5 36.5 kg,7,8 3 5 6,8 6,5 PKIN BH3 BH3 BH3 BH5 BY5 BY5 BY7 BH8 800 LB. REDUED PORT I. WL 30 inch / 3/4 / mm 5 0 5 40 50 inch 3.5 3.54 4.33 5.9 7.09 mm 80 90 0 50 80 inch 6.54 6.73 8.39 0..8 mm 66 7 3 58 300 inch 3.46 3.46 3.8 5.43 6.77 mm 88 88 97 38 7 inch.35.5.69.6.38 mm 9 3 7,5 9,5 35 inch.6.5.89.5 3.07 mm 3 38 48 64 78 lb. 3.75 4.5 6.5 4.5.75 kg,7 3 6,6 0,4 PKIN BH3 BH3 BH5 BY5 BY7 ULL PORT I. 9W 30 inch /4 3/8 / 3/4 /4 / mm 6 0 5 0 5 3 40 50 inch 3.54 3.54 4.33 5 5.9 7.09 8.7 9.06 mm 90 90 0 7 50 80 0 30 inch 6.54 6.54 8.7 9.7 0.08.8 4.76 6.85 mm 66 66 0 47 56 300 375 48 inch 3.46 3.46 3.8 5.43 5.43 6.77 6.77 9. mm 88 88 97 38 38 7 7 34 inch.8.35.47.59.79.06.6.57 mm 7 9 5 0 7 3 40 inch.5.5.89.0.5 3.07 3.35 3.74 mm 38 38 48 56 64 78 85 95 lb. 4.75 4.75 7.75 6.75 44 66 kg,, 3,5 5,5 7,6 0 0 30 PKIN BH3 BH3 BH5 B4 B4 B5 BH8 B8 Materials and trim specifications Page 9 500 LB. 500 LB. REDUED PORT I. 9WL 30 inch / 3/4 / mm 5 0 5 40 50 inch 3.54 4.33 5 7.09 8.7 mm 90 0 7 80 0 inch 6.54 8.7 9.7.8 4.76 mm 66 0 47 300 375 inch 3.46 3.8 5.43 6.77 6.77 mm 88 97 38 7 7 inch.35.47.59.06.6 mm 9 5 7 3 inch.5.89.0 3.07 3.35 mm 38 48 56 78 85 lb. 4.5 7.75 6.5 4.75 kg 3,5 5,5 9 PKIN BH3 BH5 B4 B5 BH8 9
LOBE VLVES- WELDED BONNET- ULL PORT 500 LTD. 4500 LTD. Design construction: SME B6.34 Limited lass Testing according to PI 598 Marking MSS SP5 Outside Screw and Yoke (OS&Y) Self aligning two piece packing gland Integral backseat Body bonnet weld to SME IX Loose solid disc Socket Weld Ends to SME B6. Screwed Ends (NPT) to SME B.0. Butt Welding Ends to SME B6.5 Ratings standard class: - carbon steel class 500 650 psig @ 00 43 bar + 38 - carbon steel class 4500 50 psig @ 00 776 bar + 38 SEL WELD 500 LTD. ULL PORT I. 5W 30 inch mm /4 6 3/8 0 / 5 3/4 0 5 /4 3 / 40 50 inch 4.33 4.33 5 5.9 7.09 7.09 8.7 9.06 mm 0 0 7 50 80 80 0 30 inch 7.48 7.48 8.9 9.7.34.34 4.7 6.54 mm 90 90 6 47 88 88 360 40 inch 3.46 3.46 5.43 5.43 5.43 5.43 6.77 9. mm 88 88 38 38 38 38 7 34 inch.8.35.43.57.75.87.0.38 mm 7 9 4,5 9 8 35 inch.89.89.0.5 3.07 3.07 3.35 3.74 mm 48 48 56 64 78 78 85 95 lb. 9.75 0.5 7.5 8.5 8.5 43.5 66 kg 4,5 4,7 5,5 8 3 3 9,8 30 PKIN BH4 BH4 B3 B4 B5 B5 B5 B8 inch /4 3/8 / 3/4 / mm 6 0 5 0 5 40 50 inch 5 5 5 7.09 7.09 9.06 9.06 mm 7 7 7 80 80 30 30 inch 9.06 9.06 9.5.8.8 4.57 5.75 mm 30 30 35 300 300 370 400 inch 5.43 5.43 5.43 6.77 6.77 9. 5.75 mm 38 38 38 7 7 34 400 inch.8.8.3.43.55.98.6 mm 7 7 8 4 5 3 inch.0.0.0 3.07 3.07 3.74 4.7 mm 56 56 56 78 78 95 0 lb. 4.5 4.5 4.5 33 33 55 66 kg 6,5 6,5 6,5 5 5 5 30 PKIN B3 B3 B3 4B5 4B5 B8 4B8 vailable with Socket Weld or Butt-Weld Ends only. Materials and trim specifications Page 9 0 4500 LTD. ULL PORT I. 45W 30
LOBE VLVES- WELDED BONNET- ULL PORT (Y TYPE) 800 LTD. 690 LTD. Design construction: SME B6.34 Limited lass Testing according to PI 598 Marking MSS SP5 Outside Screw and Yoke (OS&Y) Self aligning two piece packing gland Integral backseat Body bonnet weld to SME IX Loose solid disc Socket Weld Ends to SME B6. Screwed Ends (NPT) to SME B.0. Butt Welding Ends to SME B6.5 Ratings: - carbon steel class 800 000 psig @ 00 38 bar + 38 - carbon steel class 690 45 psig @ 00 9 bar + 38 SEL WELD 800 LTD. 690 LTD. ULL PORT I. Y 30 inch mm /4 6 3/8 0 / 5 3/4 0 5 /4 3 / 40 50 inch 3.35 3.35 3.35 4.3 4.7 6.5 6.5 7.48 mm 85 85 85 05 0 65 65 90 inch 6.85 6.85 6.85 8.46 0.04 0.04.5 4.76 mm 74 74 74 5 55 55 38 375 inch 3.46 3.46 3.46 3.8 5.43 6.77 6.77 6.77 mm 88 88 88 97 38 7 7 7 inch.8.35.5.69.89.38.38.77 mm 7 9 3 7,5,5 35 35 45 inch.5.5.5.89.0 3.07 3.07 3.35 mm 38 38 38 48 56 78 78 85 lb. 4.5 4.5 4.5 7.5 4.5 4.5 33 kg 3,3 5 5 PKIN BH3 BH3 BH3 BH5 BY5 BY7 BY7 BH8 ULL PORT I. 690Y 30 inch mm /4 6 3/8 0 / 5 3/4 0 5 /4 3 / 40 50 inch 3.35 3.35 4.3 4.7 6.5 6.5 7.48 8.66 mm 85 85 05 0 65 65 90 0 inch 6.89 6.89 8.46 0.04.0.40 4.96 7.7 mm 75 75 5 55 80 35 380 450 inch 3.46 3.46 3.8 5.43 5.43 6.77 6.77 9. mm 88 88 97 38 38 7 7 34 inch.8.35.47.59.79.06.6.57 mm 7 9 5 0 7 3 40 inch.5.5.89.0 3.07 3.07 3.35 3.74 mm 38 38 48 56 78 78 85 95 lb. 4.5 4.5 7.75.5 4.5 4.5 36.5 57.5 kg 3,5 5,3 6,5 6 PKIN BH3 BH3 BH5 B4 B4 BY7 BH8 B8 Materials and trim specifications Page 9
LOBE VLVES- WELDED BONNET- ULL PORT (Y TYPE) 680 LTD. 4500 LTD. Design construction: SME B6.34 Limited lass Testing according to PI 598 Marking MSS SP5 Outside Screw and Yoke (OS&Y) Self aligning two piece packing gland Integral backseat Body bonnet weld to SME IX Loose solid disc Socket Weld Ends to SME B6. Screwed Ends (NPT) to SME B.0. Butt Welding Ends to SME B6.5 Ratings: - carbon steel class 680 6700 psig @ 00 46 bar + 38 - carbon steel class 4500 50 psig @ 00 776 bar + 38 SEL WELD ULL PORT I. 680Y 30 inch /4 3/8 / 3/4 / mm 6 0 5 0 5 40 50 inch 4.3 4.3 4.7 6.5 6.5 7.48 8.66 mm 05 05 0 65 65 90 0 inch 8.66 8.66 9.45 0.83.0 4.7 7.3 mm 0 0 40 75 30 360 440 inch 3.46 3.46 5.43 5.43 5.43 6.77 9. mm 88 88 38 38 38 7 34 inch.8.35.43.57.75.0.38 mm 7 9 4,5 9 8 35 inch.89.89.0 3.07 3.07 3.35 3.74 mm 48 48 56 78 78 85 95 lb. 7.75 7.75 5.5 7.5 37.5 57.5 kg 3,5 3,5 5,5,5 7 6 PKIN BH4 BH4 B3 B4 B5 B5 B8 Note: Thread End Valves are limited to SME B6.34, 500 Pressure lass. 680 LTD. ULL PORT I. 45Y 30 inch /4 3/8 / 3/4 / mm 6 0 5 0 5 40 50 inch 4.7 4.7 4.7 6.5 6.5 8.66 9.06 mm 0 0 0 65 65 0 30 inch 9.45 9.45 9.65.0.0 6.54 7.7 mm 40 40 45 305 30 40 450 inch 5.43 5.43 5.43 6.77 6.77 9. 5.75 mm 38 38 38 7 7 34 400 inch.8.8.3.43.55.98.6 mm 7 7 8 4 5 3 inch.0.0.0 3.07 3.07 3.74 4.7 mm 56 56 56 78 78 95 0 lb..5 30.75 30.75 6.75 70.5 kg 5,5 5,5 5,6 4 4 8 3 PKIN B3 B3 B3 B4 4B5 B8 4B8 vailable with Socket Weld or Butt-Weld Ends only. Materials and trim specifications Page 9 4500 LTD.
Overview... 4 Bolted Bonnet- 800 lb. & 500 lb. valves... 5 Bolted Bonnet- 500 lb. & 500 lb. valves... 6 Welded Bonnet- 800 lb. & 500 lb. valves... 7 Welded Bonnet- 500 lb. & 4500 lb. valves... 8 Welded Bonnet (Y type)- 800 lb. & 690 lb. valves... 9 Welded Bonnet (Y type)- 680 lb. & 4500 lb. valves... 30 HEK VLVES 3
OVERVIEW HEK VLVES orged steel, piston, ball or swing check. ull or conventional port. Bolted or welded cover joint. T-Pattern or Y-Pattern. Integral body seat for piston or ball check. Separate seat ring design for the swing check valve. 3 4 5 8 7 6. BODY. The body is forged steel and designed to the basic dimensional requirements of the applicable specifications such as PI 60 and SME B6.34. The body is available in both the full or conventional port design. It is also available in either T-Pattern or Y-Pattern configurations.. OVER. The cover is forged steel and designed to the basic dimensional requirements of the applicable specifications such as PI 60 and SME B6.34. 3. BODY-OVER JOINT. Two different cover joint designs are available. These are either the bolted cover or the threaded and seal welded type. 4. SKET. The bolted cover joint design valve uses a contained, controlled compression, spiral wound type gasket. 5. OVER BOLTIN. The cover bolting is manufactured of alloy steel in accordance with the requirements of the applicable specifications such as PI 60 and SME B6.34. 6. SET. The body seat for the piston and ball check valves is an integral weld overlay and is part of the valve trim. The swing check valve is supplied with a separate seat ring which is pressed into the valve body and wedged into place, forming a seal with the body. 7. PISTON, BLL OR DIS. The piston, ball or disc is forged steel and is part of the valve trim. The seating surface of the piston and ball check is of the tapered or plug type design. The seating surface of the swing check is of the flat seat design. 8. SPRIN. The spring is optional and supplied only upon request. 4
HEK VLVES- BOLTED BONNET- ULL & REDUED PORT 800 LB. 500 LB. Design construction: SME B6.34 - BS 535 Testing according to PI 598 Marking MSS SP5 Spring on request only Spiral-wound gasket Socket Weld Ends to SME B6. Screwed Ends (NPT) to SME B.0. Butt Welding Ends to SME B6.5 Ratings: - carbon steel class 800 975 psig @ 00 38 bar + 38 - carbon steel class 500 3705 psig @ 00 55 bar + 38 ULL PORT I. H 40 - H 50 - H 60 inch mm /4 6 3/8 0 / 5 3/4 0 5 /4 3 / 40 50 inch 3.5 3.5 3.54 4.33 5 5.9 7.09 8.7 mm 80* 80 90 0 7 50 80 0 B inch.7.7.36 3.07 3.46 3.6 4.5 5.7 mm 55 55 60 78 88 9 08 45 Piston/ inch.8.35.5.69.89.6.38.77 Ball mm 7 9 3 7,5,5 9,5 35 45 Swing inch.3.38.55.7.94.8.44.89 mm 8 9,6 4 8 4 30 36,6 48 inch.6.6.50.89.0.5 3.07 3.35 mm 3 3 38 48 56 64 78 85 lb. 3 3 3.5 6.5 9.5.5 35.5 kg,4,4,6 3 4,3 5,6 0 6 SKET 3 4 6 7 9 *or swing type only =90mm 3.54inch 800 LB. ULL PORT I. 9H 40-9H 50-9H 60 inch /4 3/8 / 3/4 /4 / mm 6 0 5 0 5 3 40 50 inch 3.54 3.54 4.33 5 5.9 7.09 8.7 8.7 mm 90 90 0 7 50 80 0 0 B inch.36.36 3.07 3.46 3.6 4.5 5.7 5.9 mm 60 60 78 88 9 08 45 50 Piston/ inch.8.35.47.59.79.06.6.57 Ball mm 7 9 5 0 7 3 40 Swing inch - -.55.7.94.8.44.89 mm - - 4 8 4 30 36,6 48 inch.5.5.89.0.5 3.07 3.35 3.74 mm 38 38 48 56 64 78 85 95 lb. 3.75 3.75 6.75 0 4.5 3.5 4.75 4.75 kg,7,7 3, 4,6 6,5 0,6 9 9 SKET 3 4 5 7 8 Materials and trim specifications Page 9 5 500 LB. 800 LB. 500 LB. REDUED PORT I. HL 40 - HL 50 - HL 60 inch mm / 5 3/4 0 5 / 40 50 inch 3.5 3.54 4.33 5.9 7.09 mm 80 90 0 50 80 B inch.7.36 3.07 3.6 4.5 mm 55 60 78 9 08 Piston/ inch.35.5.69.6.38 Ball mm 9 3 7,5 9,5 35 Swing inch.38.55.7.8.44 mm 9,6 4 8 30 36,6 inch.6.5.89.5 3.07 mm 3 38 48 64 78 lb..75 3.5 6.5.5 9.75 kg,3,6,8 5,6 9,0 SKET 3 6 7 REDUED PORT I. 9HL 40-9HL 50-9HL 60 inch / 3/4 / mm 5 0 5 40 50 inch 3.54 4.33 5 7.09 8.7 mm 90 0 7 80 0 B inch.36 3.07 3.46 4.5 5.7 mm 60 78 88 08 45 Piston/ inch.35.47.59.06.6 Ball mm 9 5 7 3 Swing inch.38.55.7.8.44 mm 9,6 4 8 30 36,6 inch.5.89.0 3.07 3.35 mm 38 48 56 78 85 lb. 3.75 6.5 9.75 39.5 kg,7 3 4,4 0 8 SKET 3 5 7
HEK VLVES- BOLTED BONNET- ULL PORT 500 LB. 500 LB. Design construction: SME B6.34 - BS 535 Testing according to PI 598 Marking MSS SP5 Spring on request only Oval ring joint gasket Socket Weld Ends to SME B6. Screwed Ends (NPT) to SME B.0. Butt Welding Ends to SME B6.5 Ratings standard class: - carbon steel class 500 3705 psig @ 00 55 bar + 38 - carbon steel class 500 670 psig @ 00 45 bar + 38 500 LB. ULL PORT I. H9R 40 - H9R 50 - H9R 60 inch / 3/4 / mm 5 0 5 40 50 inch 4.33 5.9 5.9 8.7 9.06 mm 0 50 50 0 30 B inch 3.78 5.04 5.04 6.0 7.68 mm 96 8 8 55 95 Piston/ inch.47.59.75.6.5 Ball mm 5 9 3 38 Swing inch.55.7.94.44.89 mm 4 8 4 36,6 48 inch.5.7.7.95 3.6 mm 38 55 55 75 9 lb. 7 6 6 37.5 63.75 kg 3, 7,3 7,3 7 9 SKET R R7 R7 R0 R4 500 LB. ULL PORT I. 5HR 40-5HR 50-5HR 60 inch / 3/4 / mm 5 0 5 40 50 inch 5.9 5.9 8.7 9.06 9.06 mm 50 50 0 30 30 B inch 5.04 5.04 5.98 7.48 7.48 mm 8 8 5 90 90 Piston/ inch.43.57.75.0.38 Ball mm 4,5 9 8 35 Swing inch.45.59.77.0.38 mm,5 5 9,5 8 35 inch.7.7.95 3.74 3.74 mm 55 55 75 95 95 lb. 6.5 6.5 40.75 66 66 kg 7,5 7,5 8,5 30 30 SKET R6 R6 R7 R0 R0 Materials and trim specifications Page 9 6
HEK VLVES- WELDED BONNET- ULL & REDUED PORT 800 LB. 500 LB. Design construction: SME B6.34 - BS 535 Testing according to PI 598 Marking MSS SP5 Spring on request only Body bonnet weld to SME IX Socket Weld Ends to SME B6. Screwed Ends (NPT) to SME B.0. Butt Welding Ends to SME B6.5 Ratings: - carbon steel class 800 975 psig @ 00 38 bar + 38 - carbon steel class 500 3705 psig @ 00 55 bar + 38 800 LB. ULL PORT I. W 40 - W 50 - W 60 inch /4 3/8 / 3/4 /4 / mm 6 0 5 0 5 3 40 50 inch 3.5 3.5 3.54 4.33 5 5.9 7.09 8.7 mm 80 80 90 0 7 50 80 0 B inch.7.7.36 3.07 3.46 3.6 4.33 5.9 mm 55 55 60 78 88 9 0 50 Piston/ inch.8.35.5.69.89.6.38.77 Ball mm 7 9 3 7,5,5 9,5 35 45 Swing inch.3.38.55.7.94.8.44.89 mm 8 9,6 4 8 4 30 36,6 48 inch.6.6.50.89.0.5 3.07 3.35 mm 3 3 38 48 56 64 78 85 lb..5 5 7.5.5 9 30.75 kg,,3 3,3 5, 8,7 4 800 LB. REDUED PORT I. WL 40 - WL 50 - WL 60 inch / 3/4 / mm 5 0 5 40 50 inch 3.5 3.54 4.33 5.9 7.09 mm 80 90 0 50 80 B inch.3.36 3 3.6 4.33 mm 54 60 76 9 0 Piston/ inch.35.5.69.6.38 Ball mm 9 3 7,5 9,5 35 Swing inch.38.55.7.8.44 mm 9,6 4 8 30 36,6 inch.6.50.89.5 3.07 mm 3 38 48 64 78 lb..75.5 5 8.5 kg 0,9,,3 5 8,3 500 LB. ULL PORT I. 9W 40-9W 50-9W 60 inch /4 3/8 / 3/4 /4 / mm 6 0 5 0 5 3 40 50 inch 3.54 3.54 4.33 5 5.9 7.09 8.7 9.06 mm 90 90 0 7 50 80 0 30 B inch.7.7 3 3.3 3.54 4.33 5.9 9.06 mm 55 55 76 84 90 0 50 30 Piston/ inch.8.35.47.59.79.06.6.57 Ball mm 7 9 5 0 7 3 40 Swing inch.3.38.55.7.94.8.44.89 mm 8 9,6 4 8 4 30 36,6 48 inch.50.50.89.0.5 3.07 3.35 3.74 mm 38 38 48 56 64 78 85 95 lb. 3 3 5.5 8 3.5 34.5 48.5 kg,4,4,5 3,7 6 0 5,5 Materials and trim specifications Page 9 7 500 LB. REDUED PORT I. 9WL 40-9WL 50-9WL 60 inch / 3/4 / mm 5 0 5 40 50 inch 3.54 4.33 5 7.09 8.7 mm 90 0 7 80 0 B inch.3 3 3.39 4.33 5.9 mm 54 76 86 0 50 Piston/ inch.35.47.59.06.6 Ball mm 9 5 7 3 Swing inch.38.55.7.8.44 mm 9,6 4 8 30 36,6 inch.5.89.0 3.07 3.35 mm 38 48 56 78 85 lb. 3 4.75 6.5 35.5 kg,4, 3 9,6 6
HEK VLVES- WELDED BONNET- ULL PORT 500 LTD. 4500 LTD. Design construction: SME B6.34 Limited lass Testing according to PI 598 Marking MSS SP5 Spring on request only Body bonnet weld to SME IX Socket Weld Ends to SME B6. Screwed Ends (NPT) to SME B.0. Butt Welding Ends to SME B6.5 Ratings: - carbon steel class 500 650 psig @ 00 43 bar + 38 - carbon steel class 4500 50 psig @ 00 776 bar + 38 500 LTD. ULL PORT I. 5W 40-5W 50 inch mm /4 6 3/8 0 / 5 3/4 0 5 / 4 0 5 0 inch 4.33 4.33 5 5.9 7.09 8.7 9.06 mm 0 0 7 50 80 0 30 B inch.76.76 3.39 3.6 4.33 5.9 7.09 mm 70 70 86 9 0 50 80 inch.8.35.43.57.75.0.38 mm 7 9 4,5 9 8 35 inch.89.89.0.5 3.07 3.35 3.74 mm 48 48 56 64 78 85 95 lb. 7 7 8.5.5 35.5 46.5 kg 3, 3, 3,8 5,6 0 6 inch /4 3/8 / 3/4 / mm 6 0 5 0 5 4 0 5 0 inch 5 5 5 7.09 7.09 9.06 9.06 mm 7 7 7 80 80 30 30 inch 3.54 3.54 3.54 4.33 4.33 7.09 7.68 B mm 90 90 90 0 0 80 95 inch.8.8.3.43.55.98.6 mm 7 7 8 4 5 3 inch.0.0.0 3.07 3.07 3.74 4.7 mm 56 56 56 78 78 95 0 lb. 8.5 8.5 8.5 3 3 55.5 59.5 kg 3,9 3,9 3,9 0,5 0,5 5, 7 vailable with Socket Weld or Butt-Weld Ends only. Materials and trim specifications Page 9 8 4500 LTD. ULL PORT I. 45W 40-45W 50
HEK VLVES- WELDED BONNET- ULL PORT (Y TYPE) 800 LTD. 690 LTD. Design construction: SME B6.34 Limited lass - BS 535 Testing according to PI 598 Marking MSS SP5 Body bonnet weld to SME IX Spring on request only Socket Weld Ends to SME B6. Screwed Ends (NPT) to SME B.0. Butt Welding Ends to SME B6.5 Ratings: - carbon steel class 800 000 psig @ 00 38 bar + 38 - carbon steel class 690 45 psig @ 00 9 bar + 38 800 LTD. ULL PORT I. Y 40 - Y 50 inch mm /4 6 3/8 0 / 5 3/4 0 5 /4 3 / 40 50 inch 3.35 3.35 3.35 4.3 4.7 6.5 6.5 7.48 mm 85 85 85 05 0 65 65 90 B inch.76.76.76 3.54 3.93 5. 5. 6.3 mm 70 70 70 90 00 30 30 60 inch.8.35.5.69.89.6.38.77 mm 7 9 3 7,5,5 9,5 35 45 inch.50.50.50.89.0 3.07 3.07 3.35 mm 38 38 38 48 56 78 78 85 lb..5.5.5 5 6.5 7.5 7.5 6.5 kg,,,,3 3 8 8 ULL PORT I. 690Y 40-690Y 50 inch /4 3/8 / 3/4 /4 / mm 6 0 5 0 5 3 40 50 inch 3.35 3.35 4.3 4.7 6.5 6.5 7.48 8.66 mm 85 85 05 0 65 65 90 0 inch.76.76 3.54 3.93 5. 5. 6.3 7.68 B mm 70 70 90 00 30 30 60 95 inch.8.35.47.59.79.06.6.57 mm 7 9 5 0 7 3 40 inch.50.50.89.0 3.07 3.07 3.35 3.74 mm 38 38 48 56 78 78 85 95 lb..5.5 5.5 7.75 0.5 8.5 9.75 39.5 kg,,,4 3,6 9,3 3 3,5 8 Materials and trim specifications Page 9 9 690 LTD.
HEK VLVES- WELDED BONNET- ULL PORT (Y TYPE) 680 LTD. 4500 LTD. Design construction: SME B6.34 Limited lass - BS 535 Testing according to PI 598 Marking MSS SP5 Body bonnet weld to SME IX Spring on request only Socket Weld Ends to SME B6. Screwed Ends (NPT) to SME B.0. Butt Welding Ends to SME B6.5 Ratings: - carbon steel class 680 6700 psig @ 00 46 bar + 38 - carbon steel class 4500 50 psig @ 00 776 bar + 38 ULL PORT I. 680Y 40-680Y 50 inch /4 3/8 / 3/4 / mm 6 0 5 0 5 40 50 inch 4.3 4.3 4.7 6.5 6.5 7.48 8.66 mm 05 05 0 65 65 90 0 inch 3.35 3.35 3.74 4.53 4.7 5.7 7.8 B mm 85 85 95 5 0 45 85 inch.8.35.43.57.75.0.38 mm 7 9 4,5 9 8 35 inch.89.89.0 3.07 3.07 3.35 3.74 mm 48 48 56 78 78 85 95 lb. 7 7 8 9.75 9.75 9.75 44 kg 3, 3, 3,7 9 9 3,5 0 Note: Thread End Valves are limited to SME B6.34 500 Pressure lass. 680 LTD. inch /4 3/8 / 3/4 / mm 6 0 5 0 5 40 50 inch 4.7 4.7 4.7 6.5 6.5 8.66 9.06 mm 0 0 0 65 65 0 30 inch 3.74 3.74 3.74 4.53 4.7 7.8 7.68 B mm 95 95 95 5 0 85 95 inch.8.8.3.43.55.98.6 mm 7 7 8 4 5 3 inch.0.0.0 3.07 3.07 3.74 4.7 mm 56 56 56 78 78 95 0 lb. 8 8 8 9.75 9.75 44 50.5 kg 3,7 3,7 3,7 9 9 0 3 vailable with Socket Weld or Butt-Weld Ends only. Materials and trim specifications Page 9 30 4500 LTD. REDUED PORT I. 45Y 40-45Y 50
RYOENI VLVES Overview... 3 ate Type- Bolted Bonnet- 50 lb., & 300 lb. valves... 33 ate Type- Bolted Bonnet- 600 lb. valves... 34 ate Type- Bolted Bonnet- 800 lb. & 500 lb. valves... 35 ate Type- Bolted Bonnet- 500 lb. valves Welded Bonnet- 50 lb.-500 lb valves... 36 lobe Type- Bolted Bonnet- 50 lb., & 300 lb. valves... 37 lobe Type- Bolted Bonnet- 600 lb. valves... 38 lobe Type- Bolted Bonnet- 800 lb. & 500 lb. valves... 39 lobe Type- Bolted Bonnet- 500 lb. valves Welded Bonnet- 50 lb. & 500 lb. valves.. 40 3
OVERVIEW RYOENI VLVES Typical cryogenic gate valve shown. orged steel, outside screw and yoke (OS&Y), rising stem, non-rising handwheel. ull or conventional port. Bolted or welded bonnet joint. Integral backseat. 0 3 7 9 8 5 4 6. BODY. The body is forged steel and designed to the basic dimensional requirements of the applicable specifications such as PI 60 and SME B6.34. The body is available in both the full or conventional port design.. BONNET. The bonnet is forged steel and extended to act as a gas column to keep stem packing at a sufficient distance away from the frost line. The bonnet also has an integral backseat and incorporates the stuffing box, which has dimensions per the applicable specifications such as PI 60. 3. BODY-BONNET JOINT. Two different bonnet joint designs are available. These are either the bolted bonnet or the threaded and seal welded type. 4. SKET. The bolted bonnet joint design valve uses a contained, controlled compression, spiral wound type gasket. 5. BONNET BOLTIN. The bonnet bolting is manufactured of alloy steel in accordance with the requirements of the applicable specifications such as PI 60 and SME B6.34. 6. SET RINS. The seat rings are steel and make up part of the valve trim. They are pressed into the valve body and wedged into place, forming a seal with the body. The seat ring is vented on the up-stream side to prevent high pressure build up if the temperature rises in the column. The seating surfaces are ground and lapped. 3 7. WEDE. The wedge, which is a solid design, is forged or investment cast steel and is part of the valve trim. The seating surfaces are ground and lapped. 8. STEM. The stem is forged steel and part of the valve trim. It contains an integral back seat shoulder, which mates with the integral backseat of the bonnet. The stem is designed to the basic dimensional requirements of the applicable specifications such as PI 60. 9. LND ND LNE. The gland, gland flange assembly utilizes a separate, two piece design. This self aligning design allows the flange to be unevenly tightened while the gland maintains its parallel alignment with the stem and stuffing box. 0. LND BOLTS ND NUTS. The steel/stainless steel gland bolt and nut assembly is a stud, double nut arrangement. This design allows complete removal from the valve when service is required. The use of industry standard thread full length studs and nuts also allows easy replacement should these items be lost or in need of replacement.. YOKE SLEEVE. The yoke sleeve is of forged stainless steel material having a high melting point and is resistant to wear and corrosion.. HNDWHEEL. The handwheel is forged carbon steel of an open spoke design. This robust construction along with appropriate sizing allows for ease of operation.
50 LB. 300 LB. RYOENI VLVES- TE TYPE- BOLTED BONNET- ULL & REDUED PORT Design construction: PI 60- SME B6.34- BS 535- BS 6364 Testing according to PI 598 Marking MSS SP5 Outside Screw and Yoke (OS&Y) Self aligning two piece packing gland Spiral wound gasket Integral backseat ace to face according to SME B6.0 langes according to SME B6.5 Welded body- bonnet joint also available Ratings: stainless steel 8-36 - class 50 = 75 psig @ 00 9 bar + 38 - class 300 = 70 psig @ 00 49 bar + 38 50 LB. ULL PORT I. 0 inch / 3/4 / mm 5 0 5 40 50 inch 4.5 4.6 5 6.5 7.0 mm 08 7,5 7 65 78 inch 6.93 7.5 8.50.06 3.4 mm 430 445 470 535 595 inch 3.46 3.8 5.43 5.43 6.77 mm 88 97 38 38 7 inch.55.7.94,44.89 mm 4 8 4 36,6 48 lb. 0.5 3 9.5 3.5 4 kg 4,8 5,9 8,7 4,7 9 PKIN BH BH4 BH5 BY5 BY7 SKET 3 4 7 8 50 LB. REDUED PORT I. L 0 inch / 3/4 / mm 5 0 5 40 50 inch 4.5 4.6 5 6.5 7.0 mm 08 7,5 7 65 78 inch 6.54 7.3 7.7 0.08.06 mm 40 435 450 50 535 inch 3.46 3.46 3.8 5.43 5.43 mm 88 88 97 38 38 inch.38.55.7.8.44 mm 9,6 4 8 30 36,6 lb. 9.5.5 4 7.5 35.5 kg 4,3 5, 6,4,4 6 PKIN BH BH BH4 BH6 BY5 SKET 3 5 7 300 LB. ULL PORT I. 3 0 inch mm / 5 3/4 0 5 / 40 50 inch 5.5 6.00 6.5 7.5 8.50 mm 40 5,5 65 9 6 inch 6.93 7.5 8.50.06 3.4 mm 430 445 470 535 595 inch 3.46 3.8 5.43 5.43 6.77 mm 88 97 38 38 7 inch.55.7.94.44.89 mm 4 8 4 36,6 48 lb..5 5.75.75 35.5 48.5 kg 5, 7, 9,9 6 PKIN BH BH4 BH5 BY5 BY7 SKET 3 4 7 8 Materials and trim specifications Page 9 300 LB. 33 REDUED PORT I. 3L 0 inch mm / 5 3/4 0 5 / 40 50 inch 5.5 6.00 6.5 7.5 8.50 mm 40 5,5 65 9 6 inch 6.53 7. 7.7 0.08.06 mm 40 435 450 50 535 inch 3.46 3.46 3.8 5.43 5.43 mm 88 88 97 38 38 inch.38.55.7.8.44 mm 9,6 4 8 30 36,6 lb..5 4.5 7.5 33 4 kg 5, 6,5 7,8 5 9 PKIN BH BH BH4 BH6 BY5 SKET 3 5 7
600 LB. RYOENI VLVES- TE TYPE- BOLTED BONNET- ULL & REDUED PORT Design construction: PI 60- SME B6.34- BS 535- BS 6364 Testing according to PI 598 Marking MSS SP5 Outside Screw and Yoke (OS&Y) Self aligning two piece packing gland Spiral wound gasket Integral backseat ace to face according to SME B6.0 langes according to SME B6.5 Welded body- bonnet Joint also available Ratings: stainless steel 8-36 -class 600 = 440 psig @ 00 99 bar + 38 600 LB. ULL PORT I. 6 0 inch / 3/4 / mm 5 0 5 40 50 inch 6.5 7.5 8.50 9.49.5 mm 65 9 6 4 9 inch 6.93 7.5 8.50.06 3.4 mm 430 445 470 535 595 inch 3.46 3.8 5.43 5.43 6.77 mm 88 97 38 38 7 inch.55.7.94.44.89 mm 4 8 4 36,6 48 lb. 3.75 8.5 3 44 70.5 kg 6, 8,4 0,5 0 3 PKIN BH BH4 BH5 BY5 BH8 SKET 3 4 7 9 600 LB. REDUED PORT I. 6L 0 inch / 3/4 / mm 5 0 5 40 50 inch 6.5 7.5 8.50 9.49.5 mm 65 9 6 4 9 inch 6.53 7. 7.7 0.08.06 mm 40 435 450 50 535 inch 3.46 3.46 3.8 5.43 5.43 mm 88 88 97 38 38 inch.38.55.7.8.44 mm 9,6 4 8 30 36,6 lb..75 6.5.5 39.75 53 kg 5,3 7,4 9,8 8 4 PKIN BH BH BH4 BH6 BY5 SKET 3 6 7 Materials and trim specifications Page 9 34
800 LB. 500 LB. RYOENI VLVES- TE TYPE- BOLTED BONNET- Design construction: PI 60- SME B6.34- BS 535- BS 6364 Testing according to PI 598 Marking MSS SP5 Outside Screw and Yoke (OS&Y) Self aligning two piece packing gland Spiral wound gasket Integral backseat Welded body- bonnet joint also available Socket Weld Ends to SME B6. Screwed Ends (NPT) to SME B.0. Butt Welding Ends to SME B6.5 Ratings: Stainless steel 8-36 -class 800 90 psig @ 00 3 bar + 38 -class 500 3600 psig @ 00 48 bar + 38 ULL & REDUED PORT 800 LB. ULL PORT I. 0 inch /4 3/8 / 3/4 /4 / mm 6 0 5 0 5 3 40 50 inch 3.5 3.5 3.54 4.33 5 5 5 8.7 mm 80 80 90 0 7 7 7 0 inch 5.75 5.75 5.75 7.5 8.70 9.88 0.87 3.54 mm 400 400 400 445 475 505 530 598 inch 3.46 3.46 3.46 3.8 5.43 5.43 5.43 6.77 mm 88 88 88 97 38 38 38 7 inch.3.38.55.7.94.8.44.89 mm 8 9,6 4 8 4 30 36,6 48 inch.6.6.5.89.0.5 3.07 3.35 mm 3 3 38 48 56 64 78 85 lb. 7.5 7.5 7.75.5 8 6.5 35.5 50.75 kg 3,4 3,4 3,5 5, 8, 6 3 PKIN BH BH BH BH4 BH5 BH6 BY5 BH8 SKET 3 4 6 7 9 800 LB. REDUED PORT I. L 0 inch / 3/4 / mm 5 0 5 40 50 inch 3.5 3.54 4.33 5 5 mm 80 90 0 7 7 inch 5.75 5.75 7.5 9.88 0.87 mm 400 400 445 505 530 inch 3.46 3.46 3.8 5.43 5.43 mm 88 88 97 38 38 inch.38.55.7.8.44 mm 9,6 4 8 30 36,6 inch.6.5.89.5 3.07 mm 3 38 48 64 78 lb. 7.5 7.75 7.5 kg 3,4 3,5 5 9,6,5 PKIN BH BH BH4 BH6 BY5 SKET 3 6 7 500 LB. ULL PORT I. 9 0 inch /4 3/8 / 3/4 /4 / mm 6 0 5 0 5 3 40 50 inch 3.54 3.54 4.33 5 5 5 8.7 9.05 mm 90 90 0 7 7 7 0 30 inch 5.55 5.55 7. 8.50 9.49 0.47 3.03 4.4 mm 395 395 435 470 495 50 585 60 inch 3.46 3.46 3.8 5.43 5.43 5.43 6.77 9. mm 88 88 97 38 38 38 7 34 inch.3.38.55.7.94.8.44.89 mm 8 9,6 4 8 4 30 36,6 48 inch.5.5.89.0.5 3.07 3.35 3.74 mm 38 38 48 56 64 78 85 95 lb. 7.75 7.75 7 4.5 40 56.5 94.75 kg 3,5 3,5 5,5 7,8 4,5 5,6 43 PKIN BH3 BH3 BH5 BH6 B4 BY7 B5 9B8 SKET 3 4 5 7 8 Materials and trim specifications Page 9 35 500 LB. REDUED PORT I. 9L 0 inch / 3/4 / mm 5 0 5 40 50 inch 3.54 4.33 5 5 8.7 mm 90 0 7 7 0 inch 5.94 7.3 8.50 0.67 3.3 mm 405 440 470 55 590 inch 3.46 3.8 5.43 5.43 6.77 mm 88 97 38 38 7 inch.38.55.7.8.44 mm 9,6 4 8 30 36,6 inch.6.5.89.5 3.07 mm 3 38 48 64 78 lb. 8.5 8.75 30 57.5 kg 3,7 5,3 8,5 3,6 6 PKIN BH3 BH5 BH6 B5 BH8 SKET 3 5 7
RYOENI VLVES- TE TYPE- BOLTED BONNET- ULL PORT 500 LB. Design construction: SME B6.34- BS 535 ull Port type Testing according to PI 598 Marking MSS SP5 Outside Screw and Yoke (OS&Y) Self aligning two piece packing gland Body bonnet gasket ring joint type Spiral wound type gasket on request Integral backseat Integral body flanges ace to face according to SME B6.0 langes according to SME B6.5 Welded body bonnet joint also available Ratings: stainless steel 8-36 -class 500 3600 psig @ 00 48 bar + 38 500 LB. ULL PORT I. 5R 0 inch / 3/4 / mm 5 0 5 40 50 inch 8.50 9.0 0.0 4.6 mm 6 9 54 305 37,5 inch 7.9 9.9 9.68.64 4.80 mm 455 490 500 575 630 inch 3.8 5.43 5.43 6.77 9. mm 97 38 38 7 34 inch.55.7.94.44.89 mm 4 8 4 36,6 48 lb..5 30.75 38.5 68.5 30 kg 0, 4 7,5 3 59 PKIN BH5 BH6 B4 BH8 4B8 SKET R R6 R6 R0 R Materials and trim specifications Page 9 TYPIL DRWIN OR TE ND LOBE WELDED BONNET ONSTRUTION 36
50 LB. 300 LB. RYOENI VLVES- LOBE TYPE- BOLTED BONNET- ULL & REDUED PORT Design construction: SME B6.34- BS 535- BS 6364 Testing according to PI 598 Marking MSS SP5 Outside Screw and Yoke (OS&Y) Self aligning two piece packing gland Spiral wound gasket Integral backseat Loose disc stem assembly Integral body flanges ace to face according to SME B6.0 langes according to SME B6.5 Welded body - bonnet joint also available Ratings: stainless steel 8-36 - class 50 75 psig @ 00 9 bar + 38 - class 300 70 psig @ 00 49 bar + 38 50 LB. ULL PORT I. 30 inch / 3/4 / mm 5 0 5 40 50 inch 4.5 4.6 5 6.5 7.99 mm 08 7,5 7 65 03 inch 7.5 8.50 9.68.05 4.80 mm 445 470 500 560 630 inch 3.46 3.8 5.43 5.43 6.77 mm 88 97 38 38 7 inch.5.69.88.38.77 mm 3 7,5,5 35 45 lb. 0.5 3 9.5 3.5 46.5 kg 4,8 5,9 8,7 4,7 PKIN BH3 BH5 BY5 BY7 BY7 SKET 3 4 7 8 50 LB. REDUED PORT I. L 30 inch / 3/4 / mm 5 0 5 40 50 inch 4.5 4.6 5 6.5 7.99 mm 08 7,5 7 65 03 inch 5.6 7. 8. 0.7.46 mm 385 435 460 55 545 inch 3.46 3.46 3.8 5.43 6.77 mm 88 88 97 38 7 inch.35.5.69.6.38 mm 9 3 7,5 9,5 35 lb. 0.5 4.75 7.5 4 kg 4,6 5, 6,7,5 9 PKIN BH3 BH3 BH5 BY5 BY7 SKET 3 5 8 300 LB. ULL PORT I. 3 30 inch mm / 5 3/4 0 5 / 40 50 inch 6.00 7.0 7.99 9.0 0.5 mm 5,5 78 03 9 67 inch 6.53 8. 0.08.65 4.0 mm 40 460 50 550 60 inch 3.46 3.8 5.43 6.77 6.77 mm 88 97 38 7 7 inch.5.69.88.38.77 mm 3 7,5,5 35 45 lb. 3.75 7.5 6.5 46.5 68.5 kg 6, 7,9 3 PKIN BH3 BH5 BY5 BY7 BH8 SKET 3 4 7 9 Materials and trim specifications Page 9 300 LB. 37 REDUED PORT I. 3L 30 inch mm / 5 3/4 0 5 / 40 50 inch 6.00 7.0 7.99 9.0 0.5 mm 5,5 78 03 9 67 inch 5.35 7.3 8.90.6.4 mm 390 440 480 540 565 inch 3.46 3.46 3.8 5.43 6.77 mm 88 88 97 38 7 inch.35.5.69.6.38 mm 9 3 7,5 9,5 35 lb..5 4.75.5 38.5 54 kg 5,6 6,7 9,8 7,5 4,5 PKIN BH3 BH3 BH5 BY5 BY7 SKET 3 6 7
600 LB. RYOENI VLVES- LOBE TYPE- BOLTED BONNET- ULL & REDUED PORT Design construction: SME B6.34- BS 535- BS 6364 Testing according to PI 598 Marking MSS SP5 Outside Screw and Yoke (OS&Y) Self aligning two piece packing gland Spiral wound gasket Integral backseat Loose disc stem assembly Integral body flanges ace to face according to SME B6.0 langes according to SME B6.5 Welded body - bonnet joint also available Ratings: stainless steel 8-36 -class 600 440 psig @ 00 99 bar + 38 600 LB. ULL PORT I. 6 30 inch / 3/4 / mm 5 0 5 40 50 inch 6.5 7.5 8.50 9.49.5 mm 65 9 6 4 9 inch 6.53 8. 0.08.65 4.0 mm 40 460 50 550 60 inch 3.46 3.8 5.43 6.77 6.77 mm 88 97 38 7 7 inch.5.69.88.38.77 mm 3 7,5,5 35 45 lb. 4.5 9.5 7.75 48.5 75 kg 6,5 8,7,6 34 PKIN BH3 BH5 BY5 BY7 BH8 SKET 3 4 7 9 600 LB. REDUED PORT I. 6L 30 inch / 3/4 / mm 5 0 5 40 50 inch 6.5 7.5 8.50 9.49.5 mm 65 9 6 4 9 inch 5.35 7.3 8.90.6.4 mm 390 440 480 540 565 inch 3.46 3.46 3.8 5.43 6.77 mm 88 88 97 38 7 inch.35.5.69.6.38 mm 9 3 7,5 9,5 35 lb. 3 6.75.5 4 57.5 kg 5,9 7,6 0, 9 6 PKIN BH3 BH3 BH5 BY5 BY7 SKET 3 6 7 Materials and trim specifications Page 9 38
800 LB. 500 LB. RYOENI VLVES- LOBE TYPE- BOLTED BONNET- Design construction: SME B6.34- BS535- BS6364 Testing according to PI 598 Marking MSS SP5 Outside Screw and Yoke (OS&Y) Self aligning two piece packing gland Spiral wound gasket Integral backseat Loose disc stem assembly Socket Weld Ends to SME B6. Screwed Ends (NPT) to SME B.0. Butt Welding Ends to SME B6.5 Welded body - bonnet joint also available Ratings: stainless steel 8-36 - class 800 90 psig @ 00 3 bar + 38 - class 500 3600 psig @ 00 48 bar + 38 ULL & REDUED PORT 800 LB. ULL PORT I. 30 inch /4 3/8 / 3/4 /4 / mm 6 0 5 0 5 3 40 50 inch 3.5 3.5 3.54 4.33 5 5.90 7.09 8.7 mm 80 80 90 0 7 50 80 0 inch 6.34 6.34 6.53 8. 9.49 9.88.6 4. mm 45 45 40 460 495 505 540 65 inch 3.46 3.46 3.46 3.8 5.43 5.43 6.77 6.77 mm 88 88 88 97 38 38 7 7 inch.7.35.5.69.88.6.38.77 mm 7 9 3 7,5,5 9,5 35 45 inch.6.6.5.89.0.5 3.07 3.35 mm 3 3 38 48 56 64 78 85 lb. 7.75 7.75 8.5 8.5 7.75 36.5 53 kg 3,5 3,5 3,6 5, 8,4,6 6,5 4 PKIN BH3 BH3 BH3 BH5 BY5 BY5 BY7 BH8 SKET 3 4 6 7 9 800 LB. REDUED PORT I. L 30 inch / 3/4 / mm 5 0 5 40 50 inch 3.5 3.54 4.33 5.90 7.09 mm 80 90 0 50 80 inch 6.34 6.53 8. 9.9.6 mm 45 40 460 506 540 inch 3.46 3.46 3.8 5.43 6.77 mm 88 88 97 38 7 inch.35.5.69.6.38 mm 9 3 7,5 9,5 35 inch.6.5.89.5 3.07 mm 3 38 48 64 78 lb. 7.5 8.5.5.5 3.5 kg 3,3 3,8 5, 9,8 4,8 PKIN BH3 BH3 BH5 BY5 BY7 SKET 3 6 7 500 LB. ULL PORT I. 9 30 inch /4 3/8 / 3/4 /4 / mm 6 0 5 0 5 3 40 50 inch 3.54 3.54 4.33 5 5.90 7.09 8.7 9.05 mm 90 90 0 7 50 80 0 30 inch 6.4 6.4 7.9 9.49 9.68.6 4. 5.39 mm 40 40 455 495 500 540 65 645 inch 3.46 3.46 3.8 5.43 5.43 6.77 6.77 9. mm 88 88 97 38 38 7 7 34 inch.7.35.47.59.79.06.6.57 mm 7 9 5 0 7 3 40 inch.5.5.89.0.5 3.07 3.35 3.74 mm 38 38 48 56 64 78 85 95 lb. 8.75 8.75 7.5 4.5 34 55 90.5 kg 4 4 5,5 8 5,5 5 4 PKIN BH3 BH3 BH5 B4 B4 B5 BH8 9B8 SKET 3 4 5 7 8 Materials and trim specifications Page 9 39 500 LB. REDUED PORT I. 9L 30 inch / 3/4 / mm 5 0 5 40 50 inch 3.54 4.33 5.90 7.09 8.7 mm 90 0 50 80 0 inch 6.34 7.9 9.6.65 4. mm 45 455 498 550 65 inch 3.46 3.8 5.43 6.77 6.77 mm 88 97 38 7 7 inch.35.47.59.06.6 mm 9 5 7 3 inch.5.89.0 3.07 3.35 mm 38 48 56 78 85 lb. 8 9.5 34.75 60.5 kg 3,7 5,4 8,9 5,8 7,5 PKIN BH3 BH5 B4 B5 BH8 SKET 3 5 7
RYOENI VLVES- LOBE TYPE- BOLTED BONNET- ULL PORT 500 LB. Design construction: SME B6.34- BS 535- BS6364 Testing according to PI- 598 Marking MSS- SP5 Outside Screw and Yoke (OS&Y) Self aligning two piece packing gland Body bonnet gasket ring joint type Spiral wound type gasket on request Integral backseat Loose disc stem assembly Integral body flanges ace to face according to SME B6.0 langes according to SME B6.5 Welded body bonnet joint also available ull port type Ratings: stainless steel 8-36 - class 500 3600 psig @ 00 48 bar + 38 500 LB. ULL PORT I. 5R 30 inch / 3/4 / mm 5 0 5 40 50 inch 8.50 9.0 0.0 4.6 mm 6 9 54 305 37,5 inch 8.50 0.08 0.67 3.4 5.59 mm 470 50 55 595 650 inch 3.8 5.43 5.43 6.77 9. mm 97 38 38 7 34 inch.47.57.75..57 mm 4,5 9 3 40 lb. 3 30.75 40.75 7.75 36.75 kg 0,5 4 8,5 3,5 6 PKIN BH5 B4 B4 BH8 9B8 SKET R R6 R6 R0 R Materials and trim specifications Page 9 TYPIL DRWIN OR TE ND LOBE WELDED BONNET ONSTRUTION 40
Overview... 4 ate Type- Bolted Bonnet- 50 lb. & 300 lb. valves... 43 ate Type- Bolted Bonnet- 600 lb. valves... 44 ate Type- Bolted Bonnet- 500 lb. valves... 45 ate Type- Bolted Bonnet- 500 lb. valves... 46 lobe Type- Bolted Bonnet- 50 lb. & 300 lb. valves... 47 lobe Type- Bolted Bonnet- 600 lb. valves... 48 lobe Type- Bolted Bonnet- 500 lb. valves... 49 lobe Type- Bolted Bonnet- 500 lb. valves... 50 heck Type- Bolted Bonnet- 50 lb. & 300 lb. valves... 5 heck Type- Bolted Bonnet- 600 lb. valves... 5 heck Type- Bolted Bonnet- 500 lb. valves.. 53 heck Type- Bolted Bonnet- 500 lb. valves.. 54 INTERL LNED VLVES 4
OVERVIEW INTERL LNED VLVES Typical gate valve shown. orged steel, outside screw and yoke (OS&Y), rising stem, non-rising handwheel. ull or conventional port. Bolted or welded bonnet joint. Integral backseat Integral end flanges. 5 8 3 9 0 4 7 6. BODY. The body is forged steel and designed to the basic dimensional requirements of the applicable specifications such as PI 60, SME B6.34, SME B6.0 and SME B6.5. The body is available in both the full or conventional port design. End flanges are forged integral with the body.. BONNET. The bonnet is forged steel, has an integral backseat and incorporates the stuffing box, which has dimensions per the applicable specifications such as PI 60. 3. BODY-BONNET JOINT. Two different bonnet joint designs are available. These are either the bolted bonnet or the threaded and seal welded type. 4. SKET. The bolted bonnet joint design valve uses a contained, controlled compression, spiral wound type gasket. 5. BONNET BOLTIN. The bonnet bolting is manufactured of alloy steel in accordance with the requirements of the applicable specifications such as PI 60 and SME B6.34. 6. SET RINS. The seat rings are steel and make up part of the valve trim. They are pressed into the valve body and wedged into place, forming a seal with the body. The seating surfaces are ground and lapped. 7. WEDE. The wedge, which is a solid design, is forged or investment cast steel and is part of the valve trim. The seating surfaces are ground and lapped. 4 8. STEM. The stem is forged steel and part of the valve trim. It contains an integral back seat shoulder, which mates with the integral backseat of the bonnet. The stem is designed to the basic dimensional requirements of the applicable specifications such as PI 60. 9. LND ND LNE. The gland, gland flange assembly utilizes a separate, two piece design. This self aligning design allows the flange to be unevenly tightened while the gland maintains its parallel alignment with the stem and stuffing box. 0. LND BOLTS ND NUTS. The steel/stainless steel gland bolt and nut assembly is a stud, double nut arrangement. This design allows complete removal from the valve when service is required. The use of industry standard thread full length studs and nuts also allows easy replacement should these items be lost or in need of replacement.. YOKE SLEEVE. The yoke sleeve is of forged stainless steel material having a high melting point and is resistant to wear and corrosion.. HNDWHEEL. The handwheel is forged carbon steel of an open spoke design. This robust construction along with appropriate sizing allows for ease of operation.
50 LB. 300 LB. INTERL LNED VLVES- TE TYPE- BOLTED BONNET- ULL & REDUED PORT Design construction: PI 60 - SME BI6.34 - BS 535 Testing according to PI 598 Marking MSS SP5 Outside Screw and Yoke (OS&Y) Self aligning two piece packing gland Spiral-wound gasket Integral backseat Integral body flanges ace to face according to SME B6.0 langes according to SME B6.5 Ratings: -carbon steel class 50 85 psig@ 00 0 bar + 38 -carbon steel class 300 740 psig@ 00 5 bar + 38 50 LB. 300 LB. ULL PORT I. 0 inch mm / 5 3/4 0 5 / 40 50 inch 4.5 4.6 5 6.50 7 mm 08 7,5 7 65 78 inch 6.88 8.6 9.05.4 3.39 mm 75 0 30 90 340 inch 3.46 3.8 5.43 5.43 6.77 mm 88 97 38 38 7 inch.55.7.94.44.89 mm 4 8 4 36,6 48 lb. 7 0.5 3.5 5 39.5 kg 3, 4,7 6,,4 8 PKIN BH BH4 BH5 BY5 BY7 SKET 3 4 7 8 ULL PORT I. 3 0 inch mm / 5 3/4 0 5 / 40 50 inch 5.5 6 6.50 7.5 8.50 mm 40 5,5 65 9 6 inch 6.89 8.6 9.05.4 3.39 mm 75 0 30 90 340 inch 3.46 3.8 5.43 5.43 6.77 mm 88 97 38 38 7 inch.55.7.94.44.89 mm 4 8 4 36,6 48 lb. 8.5.5 5.5 9.75 4.75 kg 3,8 5,6 7, 3,5 9 PKIN BH BH4 BH5 BY5 BY7 SKET 3 4 7 8 50 LB. 300 LB. REDUED PORT I. L 0 inch mm / 5 3/4 0 5 / 40 50 3 75 inch 4.5 4.6 5 6.50 7 8 mm 08 7,5 7 65 78 03 inch 6.88 7.6 8.35 0.04.4 3.58 mm 75 8 55 90 345 inch 3.46 3.46 3.8 5.43 5.43 6.77 mm 88 88 97 38 38 7 inch.38.55.7.8.44.89 mm 9,6 4 8 30 36,6 48 lb. 6.5 8.5 9 46.75 kg,9 3,7 5, 9,6 3,, PKIN BH BH BH4 BH6 BY5 BH8 SKET 3 5 7 8 REDUED PORT I. L3 0 inch mm / 5 3/4 0 5 / 40 50 inch 5.5 6 6.50 7.5 8.5 mm 40 5,5 65 9 6 inch 6.89 7.7 8.35 9.84.4 mm 75 8 50 90 inch 3.46 3.46 3.8 5.43 5.43 mm 88 88 97 38 38 inch.38.55.7.8.44 mm 9,6 4 8 30 36,6 lb. 7.75.5 4.75 8.5 33.5 kg 3,6 5, 6,7 3 5,3 PKIN BH BH BH4 BH6 BY5 SKET 3 5 7 Materials and trim specifications Page 9 43
600 LB. INTERL LNED VLVES- TE TYPE- BOLTED BONNET- ULL & REDUED PORT Design construction: PI 60 - SME B6.34 - BS 535 Testing according to PI 598 Marking MSS SP5 Outside Screw and Yoke (OS&Y) Self aligning two piece packing gland Spiral-wound gasket Integral backseat Integral body flanges ace to face according to SME B6.0 langes according to SME B6.5 Ratings: - carbon steel class 600 480 psig @ 00 0 bar + 38 600 LB. ULL PORT I. 6 0 inch mm / 5 3/4 0 5 / 40 50 inch 6.50 7.5 8.50 9.50.50 mm 65 9 6 4 9 inch 6.89 8.46 9.45.6 4.7 mm 75 5 40 95 360 inch 3.46 3.8 5.43 5.43 6.77 mm 88 97 38 38 7 inch.55.7.94.44.88 mm 4 8 4 36,6 48 lb. 9.5 5.5 39.5 63.5 kg 4,3 7 0 8 8 PKIN BH BH4 BH5 BY5 BH8 SKET 3 4 7 9 600 LB. REDUED PORT I. L6 0 inch mm / 5 3/4 0 5 / 40 50 inch 6.50 7.5 8.50 9.50.50 mm 65 9 6 4 9 inch 6.65 7.8 8.46 0.04.0 mm 69 85 5 55 305 inch 3.46 3.46 3.8 5.43 5.43 mm 88 88 97 38 38 inch.38.55.7.8.44 mm 9,6 4 8 30 36,6 lb. 9.5 5.5 39.5 63.5 kg 4,3 7 0 8 8 PKIN BH BH BH4 BH6 BY5 SKET 3 6 7 Materials and trim specifications Page 9 44
500 LB. INTERL LNED VLVES- TE TYPE- BOLTED BONNET- ULL PORT Design construction: SME B6.34 - BS 535 ull port type Testing according to PI 598 Marking MSS SP5 Outside Screw and Yoke (OS&Y) Self aligning two piece packing gland Spiral wound gasket Integral backseat Integral body flanges ace to face according to SME B6.0 langes according to SME B6.5 Ring joint type gasket available on request Ratings: - carbon steel class 500 3705 psig @ 00 55 bar + 38 500 LB. ULL PORT I. 5 0 inch mm / 5 3/4 0 5 / 40 50 inch 8.50 9.0 0.0 4.5 mm 6 9 54 305 368.5 inch 8.46 9.84 0.63 3.78 7.5 mm 5 50 70 350 445 inch 3.8 5.43 5.43 6.77 9. mm 97 38 38 7 34 inch.55.7.94.44.89 mm 4 8 4 36,6 48 lb. 8 8.5 35.5 63.75.5 kg 8, 3 6, 9 55 PKIN BH5 BH6 B4 BH8 9B8 SKET 3 4 7 8 Materials and trim specifications Page 9 45
500 LB. INTERL LNED VLVES- TE TYPE- BOLTED BONNET- ULL PORT Design construction: SME B6.34 - BS 535 ull port type Testing according to PI 598 Marking MSS SP5 Outside Screw and Yoke (OS&Y) Self aligning two piece packing gland Body Bonnet asket ring joint type Spiral wound type gasket on request Integral backseat Integral body flanges ace to face according to SME B6.0 langes according to SME B6.5 Ratings: - carbon steel class 500 670 psig @ 00 45 bar + 38 500 LB. ULL PORT I. 5R 0 inch mm / 5 3/4 0 5 / 40 50 inch 0.39 0.75.3 5.5 7.87 mm 64 73 308 387,5 454 inch.0.4 3.9 5.98 6.34 mm 8 90 335 406 45 inch 5.43 5.43 6.77 9..60 mm 38 38 7 34 30 inch.45.59.76.0.50 mm,5 5 9,5 8 38 lb. 35.5 38.75 63.75 3.5 43.5 kg 6, 7,6 9 60 65 PKIN B4 B4 BH8 B8 5B8 SKET R6 R6 R6 R9 R Materials and trim specifications Page 9 46
50 LB. 300 LB. INTERL LNED VLVES- LOBE TYPE- BOLTED BONNET- ULL & REDUED PORT Design construction: SME B6.34 - BS 535 Testing according to PI 598 Marking MSS SP5 Outside Screw and Yoke (OS&Y) Loose disc stem assembly Self aligning two piece packing gland Spiral wound gasket Integral backseat Integral body flanges ace to face according to SME B6.0 langes according to SME B6.5 Ratings: - carbon steel class 50 85 psig @ 00 0 bar + 38 - carbon steel class 300 740 psig @ 00 5 bar + 38 50 LB. 300 LB. ULL PORT I. 30 inch mm / 5 3/4 0 5 / 40 50 inch 4.5 4.6 5 6.50 8 mm 08 7,5 7 65 03 inch 7.7 9.05 0.55.40 3.9 mm 96 30 68 35 335 inch 3.46 3.8 5.43 6.77 6.77 mm 88 97 38 7 7 inch.5.68.88.38.77 mm 3 7,5,5 35 45 lb. 8.5 4 9 36.5 55 kg 3,8 6,4 8,7 6,5 5 PKIN BH3 BH5 BY5 BY7 BY7 SKET 3 4 7 8 ULL PORT I. 3 30 inch mm / 5 3/4 0 5 / 40 50 inch 6 7 8 9.0 0.5 mm 5,5 78 03 9 67 inch 7.7 9.05 0.55.40 3.9 mm 96 30 68 35 335 inch 3.46 3.8 5.43 6.77 6.77 mm 88 97 38 7 7 inch.5.68.88.38.77 mm 3 7,5,5 35 45 lb. 9 5.5.5 40.75 6.5 kg 4, 7 9,7 8,5 8 PKIN BH3 BH5 BY5 BY7 BH8 SKET 3 4 7 9 50 LB. 300 LB. REDUED PORT I. L 30 inch mm / 5 3/4 0 5 / 40 50 inch 4.5 4.6 5 6.50 8 mm 08 7,5 7 65 03 inch 7.7 7.7 8.90 0.75.8 mm 96 96 6 73 300 inch 3.46 3.46 3.8 5.43 6.77 mm 88 88 97 38 7 inch.35.5.68.6.38 mm 9 3 7,5 9,5 35 lb. 6.5 8.5.5 34.75 kg 3 3,8 5,5 0,3 5,8 PKIN BH3 BH3 BH5 BY5 BY7 SKET 3 5 8 REDUED PORT I. L3 30 inch mm / 5 3/4 0 5 / 40 50 inch 6 7 8 9.0 0.5 mm 5,5 78 03 9 67 inch 7.7 7.95 8.90 0.63.64 mm 96 0 6 70 3 inch 3.46 3.46 3.8 5.43 6.77 mm 88 88 97 38 7 inch.35.5.68.6.38 mm 9 3 7,5 9,5 35 lb. 9 3 8.5 36.5 47.5 kg 4, 6 8,3 5,5,5 PKIN BH3 BH3 BH5 BY5 BY7 SKET 3 6 7 Materials and trim specifications Page 9 47
600 LB. INTERL LNED VLVES- LOBE TYPE- BOLTED BONNET- ULL & REDUED PORT Design construction: SME B6.34 - BS 535 Testing according to PI 598 Marking MSS SP5 Loose disc stem assembly Outside Screw and Yoke (OS&Y) Self aligning two piece packing gland Spiral wound gasket Integral backseat Integral body flanges ace to face according to SME B6.0 langes according to SME B6.5 Ratings: - carbon steel class 600 480 psig @ 00 0 bar + 38 600 LB. ULL PORT I. 6 30 inch mm / 5 3/4 0 5 / 40 50 inch 6.50 7.5 8.50 9.50.50 mm 65 9 6 4 9 inch 7.7 9.06 0.55.40 4.57 mm 96 30 68 35 370 inch 3.46 3.8 5.43 6.77 6.77 mm 88 97 38 7 7 inch.5.68.88.38.77 mm 3 7,5,5 35 45 lb. 3 7.5 3 43 6.75 kg 5,9 8 0,5 9,5 8,5 PKIN BH3 BH5 BY5 BY7 BH8 SKET 3 4 7 9 600 LB. REDUED PORT I. L6 30 inch mm / 5 3/4 0 5 / 40 50 inch 6.50 7.5 8.50 9.50.50 mm 65 9 6 4 9 inch 7.7 7.95 9. 0.63.64 mm 96 0 34 70 3 inch 3.46 3.46 3.8 5.43 6.77 mm 88 88 97 38 7 inch.35.5.67.6.38 mm 9 3 7,5 9,5 35 lb. 9.5 3.5 9 36.5 5 kg 4,4 6, 8,7 6,5 3,6 PKIN BH3 BH3 BH5 BY5 BY7 SKET 3 6 7 Materials and trim specifications Page 9 48
500 LB. INTERL LNED VLVES- LOBE TYPE- BOLTED BONNET- ULL PORT Design construction: SME B6.34 - BS 535 ull port type Testing according to PI 598 Marking MSS SP5 Outside Screw and Yoke (OS&Y) Loose Disc Stem ssembly Ring joint type gasket available on request Self aligning two piece packing gland Spiral wound gasket Integral backseat Integral body flanges ace to face according to SME B6.0 langes according to SME B6.5 Ratings: - carbon steel class 500 3705 psig @ 00 55 bar + 38 500 LB. ULL PORT I. 5 30 inch mm / 5 3/4 0 5 / 40 50 inch 8.50 9.0 0.0 4.5 mm 6 9 54 305 368.5 inch 9.45.0.6 4.57 8.3 mm 40 80 95 370 465 inch 3.8 5.43 6.77 6.77 9. mm 97 38 7 7 34 inch.47.57.75..57 mm 4,5 9 3 40 lb. 8.5 8.5 37.5 66 7.75 kg 8,5,9 7 30 58 PKIN BH5 B4 B4 BH8 9B8 SKET 3 4 7 8 Materials and trim specifications Page 9 49
500 LB. INTERL LNED VLVES- LOBE TYPE- BOLTED BONNET- ULL PORT Design construction: SME B6.34 - BS 535 ull port type Testing according to PI 598 Marking MSS SP5 Outside Screw and Yoke (OS&Y) Loose Disc Stem ssembly Body Bonnet asket ring joint type Spiral wound type gasket on request Self aligning two piece packing gland Integral backseat Integral body flanges ace to face according to SME B6.0 langes according to SME B6.5 Ratings: - carbon steel class 500 670 psig @ 00 45 bar + 38 500 LB. ULL PORT I. 5R 30 inch mm / 5 3/4 0 5 / 40 50 inch 0.39 0.75.3 5.5 7.87 mm 64 73 308 387,5 454 inch.0.40 3.78 7.7 8. mm 30 35 350 450 460 inch 5.43 5.43 6.77 9..6 mm 38 38 7 34 30 inch.43.57.75.0.38 mm 4,5 9 8 35 lb. 36.5 40.75 66 35.5 47.5 kg 6,5 8,5 30 6,5 67 PKIN B4 B4 BH8 9B8 4B8 SKET R6 R6 R6 R9 R0 Materials and trim specifications Page 9 50
50 LB. 300 LB. INTERL LNED VLVES- HEKTYPE- BOLTED BONNET- ULL & REDUED PORT Design construction: SME B6.34 - BS 535 Testing according to PI 598 Marking MSS SP5 Spring available on request for Piston and Ball heck Valves Spiral wound gasket Integral body flanges ace to face according to SME B6.0 langes according to SME B6.5 Ratings: - carbon steel class 50 85 psig @ 00 0 bar + 38 - carbon steel class 300 740 psig @ 00 5 bar + 38 50 LB. ULL PORT I. 40, 50, 60 inch / 3/4 / mm 5 0 5 40 50 inch 4.5 4.6 5 6.50 8 mm 08 7,5 7 65 03 B inch.95 3.35 3.94 4.9 5.5 mm 75 85 00 5 40 Piston/ inch.5.68.88.38.77 Ball mm 3 7,5,5 35 45 Swing inch.55.7.94.46.89 mm 4 8 4 36,6 48 lb. 6 7.75.5 35.5 kg,8 3,6 5, 0 6 SKET 3 4 7 8 50 LB. REDUED PORT I. L 40, L 50, L 60 inch / 3/4 / mm 5 0 5 40 50 inch 4.5 4.6 5 6.50 8 mm 08 7,5 7 65 03 B inch.95.95 3.35 4.33 4.9 mm 75 75 85 0 5 Piston/ inch.35.5.68.6.38 Ball mm 9 3 7,5 9,5 35 Swing inch.39.55.68.6.46 mm 9,6 4 7,5 9,5 36,6 Piston/ lb. 5 6.75 9.75 8.5 30.75 Ball kg,3 3, 4,5 8,4 4 lb. Swing 4.75 6.75 9.5 8.5 8.5 kg, 3, 4,4 8,3 3 SKET 3 5 8 300 LB. ULL PORT I. 3 40, 3 50, 3 60 inch mm / 5 3/4 0 5 / 40 50 inch 6 7 8* 9.0* 0.5 mm 5,5 78 03* 9* 67 B inch.95 3.54 3.94 4.7 5.9 mm 75 90 00 0 50 Piston/ inch.5.68.88.38.77 Ball mm 3 7,5,5 35 45 Swing inch.55.7.94.46.89 mm 4 8 4 36,6 48 lb. 7.75 4 8 33 46.5 kg 3,6 6,4 8, 5 SKET 3 4 7 9 Materials and trim specifications Page 9 5 300 LB. REDUED PORT I. L3 40, L3 50, L3 60 inch mm / 5 3/4 0 5 / 40 50 inch 6 7 8* 9.0* 0.5 mm 5,5 78 03* 9* 67 B inch.95 3.5 3.46 4.53 5. mm 75 80 88 5 30 Piston/ inch.35.5.68.6.38 Ball mm 9 3 7,5 9,5 35 Swing inch.39.55.68.6.46 mm 9,6 4 7,5 9,5 36,6 Piston/ lb. 7.5.5 6.5 30.75 4.75 Ball kg 3,4 5,3 7,5 4 9 lb. Swing 7.5.5 6.5 9.75 39.5 kg 3,3 5, 7,4 3,5 8 SKET 3 6 7 * - dimensions for Swing heck Valves only are 8.5 in. / 6 mm and 9.5 in. / 4 mm respectively
600 LB. INTERL LNED VLVES- HEK TYPE- BOLTED BONNET- ULL & REDUED PORT Design construction: SME B6.34 - BS 535 Testing according to PI 598 Marking MSS SP5 Spring available on request for Piston and Ball heck Valves Spiral wound gasket Integral body flanges ace to face according to SME B6.0 langes according to SME B6.5 Ratings: - carbon steel class 600 480 psig @ 00 0 bar + 38 600 LB. ULL PORT I. 6 40, 6 50, 6 60 inch / 3/4 / mm 5 0 5 40 50 inch 6.50 7.5 8.50 9.50.50 mm 65 9 6 4 9 B inch.95 3.54 3.94 4.7 5.9 mm 75 90 00 0 50 Piston/ inch.5.68.88.38.77 Ball mm 3 7,5,5 35 45 Swing inch.55.7.94.46.89 mm 4 8 4 36,6 48 lb. 8.5 4.5 8.5 35.5 50.5 kg 3,8 6,5 8,5 6 3 SKET 3 4 7 9 Materials and trim specifications Page 9 600 LB. 5 REDUED PORT I. L6 40, L6 50, L6 60 inch / 3/4 / mm 5 0 5 40 50 inch 6.50 7.5 8.50 9.50.50 mm 65 9 6 4 9 B inch.83 3.5 3.35 4.53 5. mm 7 80 85 5 30 Piston/ inch.35.5.68.6.38 Ball mm 9 3 7,5 9,5 35 Swing inch.39.55.68.6.46 mm 9,6 4 7,5 9,5 36,6 lb. 7.5.5 7.5 3.75 43 kg 3,5 5,7 8 4,5 9,5 SKET 3 6 7
500 LB. INTERL LNED VLVES- HEK TYPE- BOLTED BONNET- ULL PORT Design construction: SME B6.34 - BS 535 ull Port Type Testing according to PI 598 Marking MSS SP5 Spring available on request for Piston and Ball heck Valves Ring joint type gasket available on request Spiral wound gasket Integral body flanges ace to face according to SME B6.0 langes according to SME B6.5 Ratings: - carbon steel class 500 3705 psig @ 00 55 bar + 38 500 LB. ULL PORT I. 5 40, 5 50, 5 60 inch / 3/4 / mm 5 0 5 40 50 inch 8.50 9.0 0.0 4.50 mm 6 9 54 305 368,5 B inch 4.3 4.9 5.3 6.0 7.68 mm 05 5 35 55 95 Piston/ inch.47.57.75..57 Ball mm 4,5 9 3 40 Swing inch.55.7.94.46.89 mm 4 8 4 36,6 48 lb. 6.5 4.5 3.75 58.5 0 kg 7,5, 4,5 6,5 50 SKET 3 4 7 8 Materials and trim specifications Page 9 53
500 LB. INTERL LNED VLVES- HEK TYPE- BOLTED BONNET- ULL PORT Design construction: SME B6.34 - BS 535 ull Port Type Testing according to PI 598 Marking MSS SP5 Body Bonnet asket ring joint type Spiral wound type gasket on request Spring available on request for Piston and Ball heck Valves Integral body flanges ace to face according to SME B6.0 langes according to SME B6.5 Ratings: - carbon steel class 500 670 psig @ 00 45 bar + 38 500 LB. ULL PORT I. 5R 40, 5R 50, 5R 60 inch / 3/4 / mm 5 0 5 40 50 inch 0.39 0.75.3 5.5 7.87 mm 64 73 308 387,5 454 B inch 5.04 5. 5.98 7.40 7.48 mm 8 30 5 88 90 Piston/ inch.43.57.75.0.38 Ball mm 4,5 9 8 35 Swing inch.45.59.76.0.38 mm,5 5 9,5 8 35 lb. 3.5 35.5 57.75 9 3.5 kg 4,3 6 6,3 54 56 SKET R6 R6 R6 R9 R0* Materials and trim specifications Page 9 54 *R for " Swing only.
Overview... 56 ate Type- Bolted & Welded Bonnet- 800 lb. & 500 lb. valves... 57 ate Type- Welded Bonnet- 500 lb. valves... 58 lobe Type- Bolted & Welded Bonnet- 800 lb. & 500 lb. valves... 59 BELLOWS SELED VLVES 55
OVERVIEW BELLOWS SELED VLVES Typical forged steel, outside screw and yoke (OS&Y), rising stem, non-rising handwheel. ull or conventional port. Bolted or welded bonnet joint. Integral backseat. 3 9 4 0 8 7 4 3 5 6. BODY. The body is forged steel and designed to the basic dimensional requirements of the applicable specifications such as PI 60 and SME B6.34. The body is available in both the full or conventional port design.. BONNET. The bonnet is forged steel, has an integral backseat and incorporates the stuffing box, which has dimensions per the applicable specifications such as PI 60. 3. BELLOWS. The hydroformed bellows design is in accordance with specifications PI 60, and MSS-SP-7. 4. BONNET EXTENSION. The bonnet extension is forged steel and of similar material as the body and bonnet and attached by a welded connection. 5. BODY-BONNET JOINT. Two different bonnet joint designs are available. These are either the welded or the bolted bonnet type. The bolted bonnet joint design valve uses a contained, controlled compression, spiral wound type gasket. The bonnet bolting is manufactured of alloy steel in accordance with the requirements of the applicable specifications such as PI 60 and SME B6.34. 6. SET RINS. The seat rings are steel and make up part of the valve trim. They are pressed into the valve body and wedged into place, forming a seal with the body. The seating surfaces are ground and lapped. 7. WEDE. The wedge, which is a solid design, is forged or investment cast steel and is part of the valve trim. The seating surfaces are ground and lapped. 56 8. STEM. The stem is forged steel and part of the valve trim. It contains an integral back seat shoulder, which mates with the integral backseat of the bonnet. The stem is designed to the basic dimensional requirements of the applicable specifications such as PI 60. 9. LND ND LNE. The gland, gland flange assembly utilizes a separate, two piece design. This self aligning design allows the flange to be unevenly tightened while the gland maintains its parallel alignment with the stem and stuffing box. 0. LND BOLTS ND NUTS. The steel/stainless steel gland bolt and nut assembly is a stud, double nut arrangement. This design allows complete removal from the valve when service is required. The use of industry standard thread full length studs and nuts also allows easy replacement should these items be lost or in need of replacement.. YOKE SLEEVE. The yoke sleeve is of forged stainless steel material having a high melting point and is resistant to wear and corrosion.. HNDWHEEL. The handwheel is forged carbon steel of an open spoke design. This robust construction along with appropriate sizing allows for ease of operation. 3. RESE ITTIN. The grease fitting is incorporated in the bonnet for stem and yoke sleeve lubrication to ensure smooth operation. 4. THRUST WSHER. The thrust washer is between the bonnet and yoke sleeve to help prevent excessive wear of the yoke bushing and reduce operating torque.
800 LB. 500 LB. TE VLVES- BELLOWS SELED- WELDED & BOLTED BONNET- ULL & REDUED PORT Design construction: PI 60, SME B6.34, MSS-SP-7, BS 535 Testing according to PI 598 Marking MSS-SP-5 Outside Screw and Yoke (OS&Y) Self aligning two piece packing gland Spiral wound gasket Body Bonnet Weld to SME IX Integral Backseat Hydroformed bellows rease nipple for stem Socket Weld Ends to SME B6. Screwed Ends (NPT) to SME B.0. Butt Welding Ends to SME B6.5 Ratings: -carbon steel class 800 975 psig @ 00 38 bar + 38 -carbon steel class 500 3705 psig @ 00 55 bar + 38 800 LB. ULL PORT BOLTED BONNET I. S 0 - WELDED BONNET I. SHW 0 inch mm /4 6 3/8 0 / 5 3/4 0 5 /4 3 / 40 50 inch 3.5 3.5 3.54 4.33 5 5 5 8.7 mm 80 80 90 0 7 7 7 0 inch 9.05 9.05 9.64. 3.9 4.96 6.4 0.87 mm 30 30 45 85 335 380 47 530 inch 3.46 3.46 3.46 3.8 5.43 5.43 5.43 6.77 mm 88 88 88 97 38 38 38 7 inch.3.38.55.7.94.8.44.89 mm 8 9,6 4 8 4 30 36,6 48 inch.6.6.50.89.0.5 3.07 3.35 mm 3 3 38 48 56 64 78 85 lb. 6 6 6.5 0 5.75 8.5 48.5 Bolted B. kg,7,7,9 4,6 7, 0,8 lb. 5 5 5.5 8.5 3.5 8.5 4.5 44 Welded B. kg,3,3,5 3,8 6, 8,4, 0 PKIN BH BH BH BH4 BH5 BH6 BY5 BH8 SKET* 3 4 6 7 9 800 LB. REDUED PORT BOLTED BONNET I. SL 0 - WELDED BONNET I. SHWL 0 inch mm / 5 3/4 0 5 / 40 50 inch 3.5 3.54 4.33 5 5 mm 80 90 0 7 7 inch 9.05 9.64. 4.96 6.4 mm 30 45 85 380 47 inch 3.46 3.46 3.8 5.43 5.43 mm 88 88 97 38 38 inch.38.55.7.8.44 mm 9,6 4 8 30 36,6 inch.6.50.89.5 3.07 mm 3 38 48 64 78 lb. 6 6.5 9.75 0.75 7 Bolted B. kg,7 3 4,4 9,4,3 lb. 4.5 5.5 8.5 9 4.5 Welded B. kg,,4 3,9 8,6 PKIN BH BH BH4 BH6 BY5 SKET* 3 6 7 500 LB. ULL PORT BOLTED BONNET I. 9S 0 - WELDED BONNET I. 9SHW 0 inch mm / 5 3/4 0 5 / 40 50 inch 4.33 5 5 8.7 9.05 mm 0 7 7 0 30 inch 3.98 4.96 7.7.65 3.3 mm 355 380 450 550 590 inch 5.43 5.43 6.77 9..6 mm 38 38 7 34 30 inch.55.7.94.44.89 mm 4 8 4 36,6 48 inch.89.0.5 3.35 3.74 mm 48 56 64 85 95 lb. 5.5 5.75 88 Bolted B. kg 5 7 9,5 3,5 40 lb. 0 4.5 8.5 48.5 8.5 Welded B. kg 4,5 6,5 8,3 37 PKIN BH5 BH6 B4 B5 9B8 SKET* 3 4 7 8 Materials and trim specifications Page 9 57 500 LB. REDUED PORT BOLTED BONNET I. 9SL 0 - WELDED BONNET I. 9SHWL 0 inch mm / 5 3/4 0 5 / 40 50 inch 3.54 4.33 5 5 8.7 mm 90 0 7 7 0 inch.60 3.98 4.96 7.7.65 mm 30 355 380 450 550 inch 5.43 5.43 5.43 9. 9. mm 38 38 38 34 34 inch.38.55.7.8.44 mm 9,6 4 8 30 36,6 inch.50.89.0 3.07 3.35 mm 38 48 56 78 85 lb. 6.5 5.5 53 Bolted B. kg 3 5 7 0 4 lb. 6 0 4.5 9.75 48.5 Welded B. kg,8 4,6 6,5 9 PKIN BH3 BH5 BH6 B5 BH8 SKET* 3 5 7 * Only for Bolted Bonnet type.
500 LB. TE VLVES- BELLOWS SELED- WELDED BONNET- ULL PORT Design construction: SME B6.34, MSS-SP-7, BS 535 Testing according to PI 598 Marking MSS-SP-5 Outside Screw and Yoke (OS&Y) Self aligning two piece packing gland Spiral wound gasket Body Bonnet Weld to SME IX Integral Backseat Hydroformed bellows rease nipple for stem Socket Weld Ends to SME B6. Screwed Ends (NPT) to SME B.0. Butt Welding Ends to SME B6.5 Ratings: -carbon steel class 500 670 psig @ 00 45 bar + 38 500 LB. ULL PORT I. 5SHW 0 inch /4 3/8 / 3/4 /4 / mm 6 0 5 0 5 3 40 50 inch 4.33 4.33 5 5 5 5 8.7 9.05 mm 0 0 7 7 7 7 0 30 inch 4.96 4.96 6.93 7.7 0.08 4.4 4.80 7.95 mm 380 380 430 450 50 60 630 70 inch 5.43 5.43 5.43 6.77 9. 9..60 5.75 mm 38 38 38 7 34 34 30 400 inch.3.3.45.59.77.98.0.38 mm 8 8,5 5 9,5 5 8 35 inch.89.89.0.5 3.07 3.07 3.35 3.74 mm 48 48 56 64 78 78 85 95 lb. 3.5 3.5 4.5 3 35.5 37.5 63.75 99.5 kg 6, 6, 6,5 0,5 6 7 9 45 PKIN BH6 BH6 B4 B4 BH8 BH8 9B8 5B8 Materials and trim specifications Page 9 58
800 LB. 500 LB. LOBE VLVES- BELLOWS SELED- WELDED & BOLTED BONNET- ULL & REDUED PORT Design construction: SME B6.34, BS 535, MSS-SP-7 Testing according to PI 598 Marking MSS-SP-5 Outside Screw and Yoke (OS&Y) Self aligning two piece packing gland Spiral wound gasket Body Bonnet Weld to SME IX Integral Backseat Loose solid disc Socket Weld Ends to SME B6. Screwed Ends (NPT) to SME B.0. Butt Welding Ends to SME B6.5 Ratings: -carbon steel class 800 975 psig @ 00 38 bar + 38 -carbon steel class 500 3705 psig @ 00 55 bar + 38 800 LB. ULL PORT BOLTED BONNET I. S 30 - WELDED BONNET I. SHW 30 inch mm /4 6 3/8 0 / 5 3/4 0 5 /4 3 / 40 50 inch 3.5 3.5 3.54 4.33 5 5.90 7.09 8.7 mm 80 80 90 0 7 50 80 0 inch 8.07 8.07 8.7 9.64..40 3.58 7.5 mm 05 05 0 45 85 35 345 445 inch 3.46 3.46 3.46 3.8 5.43 5.43 6.77 6.77 mm 88 88 88 97 38 38 7 7 inch.7.35.5.69.87.6.38.77 mm 7 9 3 7,5,5 9,5 35 45 inch.6.6.50.89.0.5 3.07 3.35 mm 3 3 38 48 56 64 78 85 lb. 5.5 5.5 7.75.5 9.5 40.75 67.5 Bolted B. kg,5,5 3,5 5, 8,7 0 8,5 30,5 lb. 5 5 7 7.5 9.75 37.5 6.75 Welded B. kg,3,3 3, 5 8 9 7 8 PKIN BH BH BH BH4 BH5 BH6 BY5 BH8 SKET* 3 4 6 7 9 800 LB. REDUED PORT BOLTED BONNET I. SL 30 - WELDED BONNET I. SHWL 30 inch mm / 5 3/4 0 5 / 40 50 inch 3.5 3.54 4.33 5.90 7.09 mm 80 90 0 50 80 inch 8.07 8.7 9.64.40 3.58 mm 05 0 45 35 345 inch 3.46 3.46 3.8 5.43 6.77 mm 88 88 97 38 7 inch.35.5.69.6.38 mm 9 3 7,5 9,5 35 inch.6.50.89.5 3.07 mm 3 38 48 64 78 lb. 5.5 6 9.5 9.5 9.75 Bolted B. kg,5,7 4,3 8,8 3,5 lb. 4.75 5.5 7.75 7.75 6 Welded B. kg,,4 3,5 8,,8 PKIN BH BH BH4 BH6 BY5 SKET* 3 6 7 500 LB. ULL PORT BOLTED BONNET I. 9S 30 - WELDED BONNET I. 9SHW 30 inch mm / 5 3/4 0 5 / 40 50 inch 4.33 5 5.90 8.7 9.05 mm 0 7 50 0 30 inch.0.60 4.7 7.5 0.08 mm 80 30 360 445 50 inch 5.43 6.77 9..60.60 mm 38 7 34 30 30 inch.47.59.79.6.57 mm 5 0 3 40 inch.89.0.5 3.35 3.74 mm 48 56 64 85 95 lb. 0 5.5 9.75 50.75 83.75 Bolted B. kg 4,5 7 9 3 38 lb. 8.75 4.5 8.5 48.5 80.5 Welded B. kg 4 6,5 8,3 36,5 PKIN BH5 B4 B4 BH8 9B8 SKET* 3 4 7 8 Materials and trim specifications Page 9 59 500 LB. REDUED PORT BOLTED BONNET I. 9SL 30 - WELDED BONNET I. 9SHWL 30 inch mm / 5 3/4 0 5 / 40 50 inch 3.54 4.33 5 7.09 8.7 mm 90 0 7 80 0 inch 9.45.0.60 4.7 7.5 mm 40 80 30 360 445 inch 5.43 5.43 6.77 9..60 mm 38 38 7 34 30 inch.35.47.59.06.6 mm 9 5 7 3 inch.50.89.0 3.07 3.35 mm 38 48 56 78 85 lb. 7.75 0 5.5 9.75 50.75 Bolted B. kg 3,5 4,5 7 9 3 lb. 6.5 0 4.5 9.5 47.5 Welded B. kg 3 4,6 6,5 8,9,5 PKIN BH3 BH5 B4 B5 BH8 SKET* 3 5 7 * Only for Bolted Bonnet type.
Overview... 6 Valvolet End- Bolted & Welded Bonnet- 800 lb. & 500 lb. valves.. 63 Lip End- Bolted & Welded Bonnet- 800 lb. & 500 lb. valves... 63 Socket Weld End- Bolted & Welded Bonnet- 800 lb. & 500 lb. valves.. 64 Butt Weld End- Bolted & Welded Bonnet- 800 lb. & 500 lb. valves.. 64 Threaded End- Bolted & Welded Bonnet- 800 lb. & 500 lb. valves.. 64 EXTENDED BODY TE VLVES 6
OVERVIEW EXTENDED BODY TE VLVES Typical forged steel, extended body, outside screw and yoke (OS&Y), rising stem, non-rising handwheel. onventional port. Bolted or welded bonnet joint. Integral backseat. 9 0 7 5 8 4 3 6. BODY. The body is forged steel and designed to the basic dimensional requirements of the applicable specifications such as PI 60 and SME B6.34. The body is available in conventional port design with Plane End (Socket Weld), Threaded End, Lip End and Weld-O-Let End.. BONNET. The bonnet is forged steel, has an integral backseat and incorporates the stuffing box, which has dimensions per the applicable specifications such as PI 60. 3. BODY-BONNET JOINT. Two different bonnet joint designs are available. These are either the threaded and seal welded or bolted bonnet type. 4. SKET. The bolted bonnet joint design valve uses a contained, controlled compression, spiral wound type gasket. 5. BONNET BOLTIN. The bonnet bolting is manufactured of alloy steel in accordance with the requirements of the applicable specifications such as PI 60 and SME B6.34. 6. SET RINS. The seat rings are steel and make up part of the valve trim. They are pressed into the valve body and wedged into place, forming a seal with the body. The seating surfaces are ground and lapped. 7. WEDE. The wedge, which is a solid design, is forged or investment cast steel and is part of the valve trim. The seating surfaces are ground and lapped. 6 8. STEM. The stem is forged steel and part of the valve trim. It contains an integral back seat shoulder, which mates with the integral backseat of the bonnet. The stem is designed to the basic dimensional requirements of the applicable specifications such as PI 60. 9. LND ND LNE. The gland, gland flange assembly utilizes a separate, two piece design. This self aligning design allows the flange to be unevenly tightened while the gland maintains its parallel alignment with the stem and stuffing box. 0. LND BOLTS ND NUTS. The steel/stainless steel gland bolt and nut assembly is a stud, double nut arrangement. This design allows complete removal from the valve when service is required. The use of industry standard thread full length studs and nuts also allows easy replacement should these items be lost or in need of replacement.. YOKE SLEEVE. The yoke sleeve is of forged stainless steel material having a high melting point and is resistent to wear and corrosion.. HNDWHEEL. The handwheel is forged carbon steel of an open spoke design. This robust construction along with appropriate sizing allows for ease of operation.
800 LB. 500 LB. TE VLVES- EXTENDED BODY- REDUED PORT- INTERL REINORED - VLVOLET END & LIP END WELDED & BOLTED BONNET Design construction: PI 60 - SME B6.34 Testing according to PI 598 Marking MSS-SP-5 Integral extended body Outside Screw and Yoke (OS&Y) Self aligning two piece packing gland Spiral-wound gasket Body-bonnet weld to SME IX Integral backseat Socket Weld Ends to SME B6. Screwed Ends (NPT) to SME B.0. Butt Welding Ends to SME B6.5 Rating: -carbon steel class 800 975 psig @ 00 38 bar + 38 -carbon steel class 500 3705 psig @ 00 55 bar + 38 800 LB. BOLTED BONNET I. VLL 0 / WELDED BONNET I. VOLL 0 inch mm / 5 3/4 0 5 / 40 50 inch 8.5 8.60 9.6 0.37 0.53 mm 07 8,5 44,5 63,5 67,5 inch 5.98 6. 7.7 0.04.4 mm 5 58 96 55 90 inch 3.46 3.46 3.8 5.43 5.43 mm 88 88 97 38 38 inch.38.55.7.8.44 mm 9,6 4 8 30 36,6 inch.6.50.89.5 3.07 mm 3 38 48 64 78 H inch.69.87..6.8 mm 7,5 8,5 4 46 I inch.6.9.9.5.3 mm 4 4,8 4,8 6,3 8 L inch 6.57 6.8 7.48 7.87 8.03 mm 67 73 90 00 04 M inch.87.8.44.99.56 mm 30 36,5 50,5 65 lb. 5.75 6.75.5 8.5 Bolted B. kg,6 3, 5, 9,5 3 lb. 5 6.5 9.5 9.5 5.75 Welded B. kg,3,9 4,3 8,8,7 PKIN BH BH BH4 BH6 BY5 SKET* 3 6 7 Materials and trim specifications Page 9 Valvolet run pipe consolidation sizes Page 93 63 500 LB. BOLTED BONNET I. 9VLL 0 / WELDED BONNET I. 9VOLL 0 inch / 3/4 / mm 5 0 5 40 inch 8.60 9.6 0.37 0.53 mm 8,5 44,5 63,5 67,5 inch 6.0 7.48 8.66.0 mm 53 90 0 8 inch 3.46 3.8 5.43 5.43 mm 88 97 38 38 inch.38.55.7.8 mm 9,6 4 8 30 inch.50.89.0 3.07 mm 38 48 56 78 H inch.69.87..6 mm 7,5 8,5 4 I inch.6.9.9.5 mm 4 4,8 4,8 6,3 L inch 6.8 7.48 7.87 8.03 mm 73 90 00 04 M inch.8.44.99.56 mm 30 36,5 50,5 65 lb. 8.5 3 3 Bolted B. kg 3,6 5,6 0,5 4,5 lb. 6.5 0.5 9.75 7.5 Welded B. kg,9 4,7 9,5 PKIN BH3 BH5 BH6 B5 SKET* 3 5 * Only for Bolted Bonnet type.
800 LB. 500 LB. TE VLVES- EXTENDED BODY- REDUED PORT- SOKET WELDED- PLIN END, SREWED END & BUTT WELD END - WELDED & BOLTED BONNET Design construction: PI 60 - SME B6.34 Testing according to PI 598 Marking MSS-SP-5 Integral extended body Outside Screw and Yoke (OS&Y) Self aligning two piece packing gland Spiral-wound gasket Body-bonnet weld to SME IX Integral backseat Socket Weld Ends to SME B6. Screwed Ends (NPT) to SME B.0. Butt Welding Ends to SME B6.5 Rating: -carbon steel class 800 975 psig @ 00 38 bar + 38 -carbon steel class 500 3705 psig @ 00 55 bar + 38 800 LB. BOLTED BONNET I. ML 0 / WELDED BONNET I. ML 0 inch mm / 5 3/4 0 5 / 40 50 inch 5.57 5.77 6.53 7.50 8.50 mm 4,5 46,5 66 90,5 6 inch 5.98 6.4 7.7 0.08.4 mm 5 56 96 56 90 inch 3.46 3.46 3.8 5.43 5.43 mm 88 88 97 38 38 inch.38.55.7.8.44 mm 9,6 4 8 30 36,6 inch.6.50.89.5 3.07 mm 3 38 48 64 78 H inch.84.05.3.90.37 mm,3 6,7 33,4 48,3 60,3 I inch.5.63.83.34.65 mm 3 6 34 4 L inch 4.0 4.0 4.37 5 6.0 mm 0 0 7 53 N inch.90.0.4.05.44 mm 3 8 36 5 6 lb. 5.5 5.75 9.5 7.75 6 Bolted B. kg,4,6 4, 8,,8 lb. 3.75 4.5 7 5.75.75 Welded B. kg,7, 3, 7, 0,3 PKIN BH BH BH4 BH6 BY5 SKET* 3 6 7 500 LB. BOLTED BONNET I. 9ML 0 / WELDED BONNET I. 9ML 0 inch mm / 5 3/4 0 5 / 40 inch 5.77 6.53 7.50 8.50 mm 46,5 66 90,5 6 inch 6.0 7.48 8.66.0 mm 53 90 0 8 inch 3.46 3.8 5.43 5.43 mm 88 97 38 38 inch.38.55.7.8 mm 9,6 4 8 30 inch.50.89.5 3.35 mm 38 48 64 85 H inch.84.05.3.90 mm,3 6,7 33,4 48,3 I inch.5.63.83.34 mm 3 6 34 L inch 4.0 4.37 5 6.0 mm 0 7 53 N inch.90.0.4.05 mm 3 8 36 5 lb. 5.75 0 0 8.5 Bolted B. kg,6 4,6 9, 3 lb. 4.5 8.5 7.75 6.5 Welded B. kg, 3,8 8, PKIN BH3 BH5 BH6 B5 SKET* 3 5 Materials and trim specifications Page 9 * Only for Bolted Bonnet type. 64 Male threaded ends in class 500 lb. and NPS ½" in class 800 lb. not permitted by PI 60
SPEIL ETURES Special features are available on request. ll ate and lobe valves can be equipped with pneumatic or hydraulic actuator, double effect or spring action. Bellows seal valves full protected. 66
SPEIL ETURES Position indicator and stem protection on lobe valves. lexible and split wedge available on request. Position indicator and stem protection on ate valves. 67
SPEIL ETURES ll ate and lobe valves can be equipped with electric actuator, per customer s specification. Locking device with padlock. One option shown. Other designs are supplied. Stuffing box with live loading system. One option shown. Other designs are supplied. Quick opening lobe and ate valves. 68
SPEIL ETURES Body Bonnet connection pressure seal design. Bonnet-Less type, non rotating stem, no rising handwheel, position indicator. Special pipe connection such as clamp-lock, special B.W.E., nipples or other customer s request. Valves can be supplied with a deep stuffing box with lantern ring and a double ball grease injector. 69
Pressure-Temperature Ratings... 7-90 Standard Materials Specification... 9 Recommended Spare Parts for orged Valves... 9 Thread Standard SME B.0.... 93 Socket Weld Standard SME B6.... 93 Valvolet Run Pipe onsolidation... 93 Valve low oefficient... 94-95 TEHNIL DT 7
PRESSURE-TEMPERTURE RTINS PSI - MTERILS: STM 05 N (a) - STM 350 L (a) BR - STNDRD LSS Temperature 50 300 400 600 800 900 500 500 4500-0 to 00 85 740 990,480,975,0 3,705 6,70,0 00 60 675 900,350,800,05 3,375 5,65 0,0 300 30 655 875,35,750,970 3,80 5,470 9,845 400 00 635 845,70,690,900 3,70 5,80 9,505 500 70 600 800,00,595,795,995 4,990 8,980 600 40 550 730,095,460,640,735 4,560 8,0 650 5 535 75,075,430,60,685 4,475 8,055 700 0 535 70,065,40,600,665 4,440 7,990 750 95 505 670,00,345,50,50 4,00 7,560 800 80 40 550 85,00,35,060 3,430 6,70 850 65 70 355 535 75 805,340,30 4,00 900 50 70 30 345 460 55 860,430,570 950 35 05 40 05 75 30 55 860,545 000 0 50 70 05 40 55 60 430 770 SPEIL LSS Temperature 50 300 400 600 800 900 500 500 4500-0 to 00 90 750,000,500,000,50 3,750 6,50,50 00 90 750,000,500,000,50 3,750 6,50,50 300 90 750,000,500,000,50 3,750 6,50,50 400 90 750,000,500,000,50 3,750 6,50,50 500 90 750,000,500,000,50 3,750 6,50,50 600 75 75 950,45,900,40 3,565 5,940 0,690 650 70 700 935,400,865,00 3,495 5,85 0,485 700 65 695 95,390,850,080 3,470 5,780 0,405 750 40 630 840,60,680,890 3,50 5,50 9,450 800 00 55 685,030,375,545,570 4,85 7,75 850 30 335 445 670 895,005,670,785 5,05 900 85 5 85 430 575 645,070,785 3,5 950 50 30 70 60 345 385 645,070,930 000 5 65 85 30 75 95 30 535 965 STNDRD LSS Temperature 50 300 400 600 800 900 500 500 4500-9 +38 9,7 5,0 68,3 0,0 36, 53, 55,5 45,4 766,0 93,3 7,9 46,5 6, 93, 4, 39,6 3,7 387,8 697,8 48,9 5,9 45, 60,3 90,7 0,7 35,8 6, 377, 678,8 04,4 3,8 43,8 58,3 87,6 6,5 3,0 8,6 364, 655,4 60,0,7 4,4 55, 8,7 0,0 3,8 06,5 344, 69, 35,6 9,7 37,9 50,3 75,5 00,7 3, 88,6 34,4 566, 343,3 8,6 36,9 49,3 74, 98,6,0 85, 308,6 555,4 37, 7,6 36,9 49,0 73,4 97,9 0,3 83,8 306, 550,9 398,9 6,6 34,8 46, 69,6 9,7 04, 73,8 89,6 5,3 46,7 5,5 8,3 37,9 56,9 75,8 85, 4,0 36,5 45,4 454,4 4,5 8,6 4,5 36,9 49,3 55,5 9,4 53,8 76,5 48, 3,4,7 5,9 3,8 3,7 35,5 59,3 98,6 77, 50,0,4 7, 9,7 4, 9,0,4 35,5 59,3 06,5 537,8,4 3,4 4,8 7, 9,6 0,7 7,9 9,6 53, SPEIL LSS Temperature 50 300 400 600 800 900 500 500 4500-9 +38 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 93,3 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 48,9 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 04,4 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 60,0 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 35,6 9,0 49,3 65,5 98,3 3,0 47,6 45,8 409,6 737, 343,3 8,6 48,3 64,5 96,5 8,6 44,8 4,0 40,6 7,9 37, 8,3 47,9 63,8 95,8 7,5 43,4 39,3 398,5 77,4 398,9 6,5 43,4 57,9 86,9 5,8 30,3 7, 36,0 65,6 46,7 3,8 35,5 47, 7,0 94,8 06,5 77, 95,5 53,9 454,4 9,0 3, 30,7 46, 6,7 69,3 5, 9,0 345,8 48, 5,9 4,8 9,7 9,6 39,6 44,5 73,8 3,,7 50,0 3,4 9,0,7 7,9 3,8 6,5 44,5 73,8 33, 537,8,7 4,5 5,9 9,0, 3,4, 36,9 66,5 7
PRESSURE-TEMPERTURE RTINS PSI - MTERILS: STM 8 5 - STM 8 5a BR - STNDRD LSS Note: for temperature > 000 valves in class 50 lbs are limited to BW Ends only. Temperature 50 300 400 600 800 900 500 500 4500-0 to 00 90 750,000,500,000,50 3,750 6,50,50 00 60 745 995,490,000,35 3,75 6,05,70 300 30 75 955,430,940,50 3,580 5,965 0,740 400 00 705 940,40,880,5 3,530 5,880 0,585 500 70 665 885,330,775,995 3,35 5,540 9,965 600 40 605 805,0,65,85 3,05 5,040 9,070 650 5 590 785,75,570,765,940 4,905 8,85 700 0 570 755,35,55,705,840 4,730 8,55 750 95 530 705,055,40,585,640 4,400 7,90 800 80 50 675,05,35,55,540 4,30 7,60 850 65 485 645 965,70,450,45 4,030 7,50 900 50 370 495 740 940,0,850 3,085 5,555 950 35 75 365 550 695 85,370,85 4,5 000 0 00 65 400 50 595 995,655,985 050 0 45 90 90 375 430 70,00,60 00 0 00 35 00 75 300 495 830,490 50 0 60 80 5 85 85 30 55 95 00 5 35 45 70 0 05 70 85 55 SPEIL LSS Temperature 50 300 400 600 800 900 500 500 4500-0 to 00 90 750,000,500,000,50 3,750 6,50,50 00 90 750,000,500,000,50 3,750 6,50,50 300 80 730 970,455,940,85 3,645 6,070 0,930 400 75 70 960,440,90,60 3,600 6,000 0,800 500 75 70 960,440,90,60 3,600 6,000 0,800 600 70 705 945,45,885,0 3,535 5,895 0,605 650 70 700 930,395,860,095 3,495 5,80 0,480 700 65 685 95,370,85,055 3,430 5,75 0,85 750 55 660 880,30,760,980 3,300 5,500 9,900 800 45 640 850,75,700,95 3,95 5,30 9,580 850 30 605 805,0,65,85 3,00 5,035 9,065 900 75 465 65 95,35,390,35 3,855 6,945 950 30 345 455 685 95,030,75,855 5,45 000 95 50 330 495 660 745,45,070 3,730 050 70 80 40 360 480 540 900,500,700 00 50 5 65 50 335 375 60,035,865 50 30 75 05 55 05 30 385 645,55 00 5 45 55 85 5 30 5 355 645 STNDRD LSS Note: for temperature > 540 valves in class 50 lbs are limited to BW Ends only. Temperature 50 300 400 600 800 900 500 500 4500-9 +38 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 93,3 7,9 5,4 68,6 0,7 37,9 54, 56,8 47,8 770, 48,9 5,9 49,3 65,8 98,6 33,8 48, 46,8 4,3 740,5 04,4 3,8 48,6 64,8 97, 9,6 45,8 43,4 405,4 79,8 60,0,7 45,9 6,0 9,7,4 37,6 9,3 38,0 687, 35,6 9,7 4,7 55,5 83,4,3 5, 08,6 347,5 65,4 343,3 8,6 40,7 54, 8,0 08,,7 0,7 338, 608,5 37, 7,6 39,3 5, 78,3 04,4 7,6 95,8 36, 587, 398,9 6,6 36,5 48,6 7,7 97,9 09,3 8,0 303,4 546, 46,7 5,5 35, 46,5 70,0 9,3 05, 75, 9,7 54,7 454,4 4,5 33,4 44,5 66,5 80,7 00,0 66,5 77,9 499,9 48, 3,4 5,5 34, 5,0 64,8 76,5 7,6,7 383,0 50,0,4 9,0 5, 37,9 47,9 56,9 94,5 57,6 83,7 537,8,4 3,8 8,3 7,6 35, 4,0 68,6 4, 05,8 565,6,4 0,0 3, 0,0 5,8 9,6 49,6 8,7 48,9 593,3,4 6,9 9,3 3,8 9,0 0,7 34, 57, 0,7 6,,4 4, 5,5 8,6,7,8,4 35,5 63,8 648,9,0,4 3, 4,8 8,3 7,,7 9,7 35,5 SPEIL LSS Temperature 50 300 400 600 800 900 500 500 4500-9 +38 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 93,3 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 48,9 9,3 50,3 66,9 00,3 33,8 50,7 5,3 48,5 753,6 04,4 9,0 49,6 66, 99,3 3,4 48,9 48, 43,7 744,7 60,0 9,0 49,6 66, 99,3 3,4 48,9 48, 43,7 744,7 35,6 8,6 48,6 65, 97,6 9,9 46, 43,7 406,5 73, 343,3 8,6 48,3 64, 96, 8, 44,5 4,0 40,3 7,6 37, 8,3 47, 63, 94,5 5,9 4,7 36,5 394,0 709, 398,9 7,6 45,5 60,7 9,0,3 36,5 7,5 379, 68,6 46,7 6,9 44, 58,6 87,9 7, 3,0 0,3 366,8 660,5 454,4 5,9 4,7 55,5 83,4,3 5, 08, 347, 65,0 48,, 3, 4,4 63,8 85, 95,8 59,6 65,8 478,9 50,0 9,0 3,8 3,4 47, 63, 7,0 8, 96,9 354,7 537,8 6,6 7,,8 34, 45,5 5,4 85,8 4,7 57, 565,6 4,8,4 6,5 4,8 33, 37, 6, 03,4 86, 593,3 3,4 8,6,4 7, 3, 5,9 4,7 7,4 8,6 6,, 5, 7, 0,7 4, 5,9 6,5 44,5 79,6 648,9,0 3, 3,8 5,9 7,9 9,0 4,8 4,5 44,5 73
PRESSURE-TEMPERTURE RTINS PSI - MTERILS: STM 8 9 BR - STNDRD LSS Note: for temperature > 000 valves in class 50 lbs are limited to BW Ends only. Temperature 50 300 400 600 800 900 500 500 4500-0 to 00 90 750,000,500,000,50 3,750 6,50,50 00 60 750,000,500,000,50 3,750 6,50,50 300 30 730 970,455,940,85 3,640 6,070 0,95 400 00 705 940,40,880,5 3,530 5,880 0,585 500 70 665 885,330,775,995 3,35 5,540 9,965 600 40 605 805,0,65,85 3,05 5,040 9,070 650 5 590 785,75,570,765,940 4,905 8,85 700 0 570 755,35,55,705,840 4,730 8,55 750 95 530 70,065,40,595,660 4,430 7,970 800 80 50 675,05,355,55,540 4,30 7,60 850 65 485 650 975,300,460.435 4,060 7,305 900 50 450 600 900,00,350,45 3,745 6,740 950 35 375 505 755 985,30,885 3,45 5,655 000 0 55 340 505 780 760,70,5 3,805 050 0 70 30 345 505 55 855,430,570 00 0 5 50 5 300 340 565 945,695 50 0 75 00 50 00 5 375 630,30 00 0 50 70 05 40 55 55 430 770 SPEIL LSS Temperature 50 300 400 600 800 900 500 500 4500-0 to 00 90 750,000,500,000,50 3,750 6,50,50 00 90 750,000,500,000,50 3,750 6,50,50 300 90 750,000,500,000,50 3,750 6,50,50 400 90 750,000,500,000,50 3,750 6,50,50 500 90 750,000,500,000,50 3,750 6,50,50 600 90 750,000,500,000,50 3,750 6,50,50 650 90 750,000,500,000,50 3,750 6,50,50 700 80 735 980,465,955,00 3,665 6,0 0,995 750 80 730 970,460,945,85 3,645 6,070 0,930 800 75 70 960,440,90,60 3,600 6,000 0,800 850 60 680 905,355,805,030 3,385 5,645 0,60 900 30 600 800,00,600,800 3,000 5,000 9,000 950 80 470 630 945,60,45,355 3,930 7,070 000 0 35 45 635 845 950,585,645 4,755 050 80 5 85 430 575 645,070,785 3,5 00 55 40 90 85 380 45 70,80,0 50 35 95 5 90 55 85 470 785,45 00 5 65 85 30 75 95 30 535 965 STNDRD LSS Note: for temperature > 540 valves in class 50 lbs are limited to BW Ends only. Temperature 50 300 400 600 800 900 500 500 4500-9 +38 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 93,3 7,9 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 48,9 5,9 50,3 66,9 00,3 33,8 50,7 5,0 48,5 753,3 04,4 3,8 48,6 64,8 97, 9,6 45,8 43,4 405,4 79,8 60,0,7 45,9 6,0 9,7,4 37,6 9,3 38,0 687, 35,6 9,7 4,7 55,5 83,4,3 5, 08,6 347,5 65,4 343,3 8,6 40,7 54, 8,0 08,,7 0,7 338, 608,5 37, 7,6 39,3 5, 78,3 04,4 7,6 95,8 36, 587, 398,9 6,6 36,5 49,0 73,4 97,9 0,0 83,4 305,4 549,5 46,7 5,5 35, 46,5 70,0 93,4 05, 75, 9,7 54,7 454,4 4,5 33,4 44,8 67, 89,6 00,7 67,9 79,9 503,7 48, 3,4 3,0 4,4 6, 8,7 93, 54,8 58, 464,7 50,0,4 5,9 34,8 5, 67,9 77,9 30,0 6,8 389,9 537,8,4 7,6 3,4 34,8 53,8 5,4 87,6 45,8 6,4 565,6,4,7 5,9 3,8 34,8 35,5 59,0 98,6 77, 593,3,4 7,9 0,3 5,5 0,7 3,4 39,0 65, 6,9 6,,4 5, 6,9 0,3 3,8 5,5 5,9 43,4 77,9 648,9,4 3,4 4,8 7, 9,6 0,7 7,6 9,6 53, SPEIL LSS Temperature 50 300 400 600 800 900 500 500 4500-9 +38 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 93,3 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 48,9 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 04,4 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 60,0 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 35,6 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 343,3 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 37, 9,3 50,7 67,6 0,0 34,7 5,7 5,7 4,3 758, 398,9 9,3 50,3 66,9 00,7 34, 50,7 5,3 48,5 753,6 46,7 9,0 49,6 66, 99,3 3,3 48,9 48, 43,7 744,7 454,4 7,9 46,9 6,4 93,4 4,4 40,0 33,4 389, 700,5 48, 5,9 4,4 55, 8,7 0,3 4, 06,9 344,8 60,6 50,0,4 3,4 43,4 65, 86,8 97,6 6,4 7,0 487,5 537,8 8,3,7 9,3 43,8 58, 65,5 09,3 8,4 37,9 565,6 5,5 4,8 9,7 9,6 39,6 44,5 73,8 3,,7 593,3 3,8 9,7 3, 9,7 6, 9,3 49,0 8,4 46, 6,,4 6,6 8,6 3, 7,5 9,7 3,4 54, 97,6 648,9,7 4,5 5,9 9,0, 3,4, 36,9 66,5 74
PRESSURE-TEMPERTURE RTINS PSI - MTERILS: STM 8 9 BR - STNDRD LSS Note: for temperature > 000 valves in class 50 lbs are limited to BW Ends only. Temperature 50 300 400 600 800 900 500 500 4500-0 to 00 90 750,000,500,000,50 3,750 6,50,50 00 60 750,000,500,000,50 3,750 6,50,50 300 30 730 970,455,940,85 3,640 6,070 0,95 400 00 705 940,40,880,5 3,530 5,880 0,585 500 70 665 885,330,775,995 3,35 5,540 9,965 600 40 605 805,0,65,85 3,05 5,040 9,070 650 5 590 785,75,570,765,940 4,905 8,85 700 0 570 755,35,55,705,840 4,730 8,55 750 95 530 70,065,40,595,660 4,430 7,970 800 80 50 675,05,355,55,540 4,30 7,60 850 65 485 650 975,300,460,435 4,060 7,305 900 50 450 600 900,00,350,45 3,745 6,740 950 35 385 55 775,030,60,930 3,0 5,795 000 0 365 485 75 970,090,80 3,030 5,450 050 0 360 480 70 960,080,800 3,000 5,400 00 0 300 400 605 805 905,50,55 4,55 50 0 5 95 445 595 670,5,855 3,345 00 0 45 90 90 385 430 70,00,60 SPEIL LSS Temperature 50 300 400 600 800 900 500 500 4500-0 to 00 90 750,000,500,000,50 3,750 6,50,50 00 90 750,000,500,000,50 3,750 6,50,50 300 90 750,000,500,000,50 3,750 6,50,50 400 90 750,000,500,000,50 3,750 6,50,50 500 90 750,000,500,000,50 3,750 6,50,50 600 90 750,000,500,000,50 3,750 6,50,50 650 90 750,000,500,000,50 3,750 6,50,50 700 80 735 980,465,955,00 3,665 6,0 0,995 750 80 730 970,460,945,85 3,645 6,070 0,930 800 75 70 960,440,90,60 3,600 6,000 0,800 850 60 680 905,355,805,030 3,385 5,645 0,60 900 30 600 800,00,600,800 3,000 5,000 9,000 950 80 470 630 945,60,45,360 3,930 7,070 000 60 40 560 840,0,60,05 3,505 6,30 050 60 40 560 840,0,60,05 3,505 6,30 00 45 375 505 755,005,30,885 3,45 5,655 50 05 80 370 555 740 835,395,30 4,80 00 70 80 40 360 480 540 900,500,700 STNDRD LSS Note: for temperature > 540 valves in class 50 lbs are limited to BW Ends only. Temperature 50 300 400 600 800 900 500 500 4500-9 +38 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 93,3 7,9 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 48,9 5,9 50,3 66,9 00,3 33,8 50,7 5,0 48,5 753,3 04,4 3,8 48,6 64,8 97, 9,6 45,8 43,4 405,4 79,8 60,0,7 45,9 6,0 9,7,4 37,6 9,3 38,0 687, 35,6 9,7 4,7 55,5 83,4,3 5, 08,6 347,5 65,4 343,3 8,6 40,7 54, 8,0 08,,7 0,7 338, 608,5 37, 7,6 39,3 5, 78,3 04,4 7,6 95,8 36, 587, 398,9 6,6 36,5 49,0 73,4 97,9 0,0 83,4 305,4 549,5 46,7 5,5 35, 46,5 70,0 93,4 05, 75, 9,7 54,7 454,4 4,5 33,4 44,8 67, 89,6 00,7 67,9 79,9 503,7 48, 3,4 3,0 4,4 6, 8,7 93, 54,8 58, 464,7 50,0,4 6,6 35,5 53,4 7,0 80,0 33,,0 339,7 537,8,4 5, 33,4 50,0 66,9 75, 5,5 09,0 375,9 565,6,4 4,8 33, 49,7 66, 74,5 4, 06,9 37,4 593,3,4 0,7 7,6 4,7 55,5 6,4 04, 73,4 3,0 6,,4 5,5 0,3 30,7 4,0 46, 76,9 7,9 30,7 648,9,4 0,0 3, 0,0 6,5 9,7 49,7 8,8 49,0 SPEIL LSS Note: for temperature > 540 valves in class 50 lbs are limited to BW Ends only. Temperature 50 300 400 600 800 900 500 500 4500-9 +38 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 93,3 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 48,9 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 04,4 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 60,0 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 35,6 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 343,3 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 37, 9,3 50,7 67,6 0,0 34,8 5,7 5,7 4,3 758, 398,9 9,3 50,3 66,9 00,7 34, 50,7 5,3 48,5 753,6 46,7 9,0 49,6 66, 99,3 3,4 48,9 48, 43,7 744,7 454,4 7,9 46,9 6,4 93,4 4,4 40,0 33,4 389, 700,5 48, 5,9 4,4 55, 8,8 0,3 4, 06,9 344,8 60,7 50,0,4 3,4 43,4 65, 86,9 97,6 6,8 7,0 487,6 537,8,0 9,0 38,6 57,9 77, 86,9 45, 4,7 435, 565,6,0 9,0 38,6 57,9 77, 86,9 45, 4,7 435, 593,3 0,0 5,9 34,8 5, 69,3 77,9 30,0 6,9 390,0 6, 7, 9,3 5,5 38,3 5 57,6 96, 60,0 88, 648,9 4,8,4 6,6 4,8 33, 37, 6, 03,5 86, 75
PRESSURE-TEMPERTURE RTINS PSI - MTERILS: STM 8 L (b) - STM 8 L (b) BR - STNDRD LSS Note: for temperature > 000 valves in class 50 lbs are limited to BW Ends only. Temperature 50 300 400 600 800 900 500 500 4500-0 to 00 90 750,000,500,000,50 3,750 6,50,50 00 60 750,000,500,900,50 3,750 6,50,50 300 30 70 965,445,795,65 3,60 6,05 0,830 400 00 695 95,385,755,080 3,465 5,775 0,400 500 70 665 885,330,70,995 3,35 5,540 9,965 600 40 605 805,0,65,85 3,05 5,040 9,070 650 5 590 785,75,570,765,940 4,905 8,85 700 0 570 755,35,55,705,840 4,730 8,55 750 95 530 70,065,40,595,660 4,430 7,970 800 80 50 675,05,355,55,540 4,30 7,60 850 65 485 650 975,300,460,435 4,060 7,305 900 50 450 600 900,00,350,45 3,745 6,740 950 35 30 45 640,005 955,595,655 4,785 000 0 5 90 430 595 650,080,800 3,40 050 0 45 90 90 365 430 70,00,60 00 0 95 30 90 55 90 480 800,440 50 0 60 80 5 40 85 30 55 95 00 5 40 50 75 95 5 90 35 565 SPEIL LSS Note: for temperature > 000 valves in class 50 lbs are limited to BW Ends only. Temperature 50 300 400 600 800 900 500 500 4500-0 to 00 90 750,000,500,000,50 3,750 6,50,50 00 90 750,000,500,000,50 3,750 6,50,50 300 90 750,000,500,000,50 3,750 6,50,50 400 90 750,000,500,000,50 3,750 6,50,50 500 90 750,000,500,000,50 3,750 6,50,50 600 90 750,000,500,000,50 3,750 6,50,50 650 90 750,000,500,000,50 3,750 6,50,50 700 80 735 980,465,955,00 3,665 6,0 0,995 750 80 730 970,460,945,85 3,645 6,070 0,930 800 75 70 960,440,90,60 3,600 6,000 0,800 850 60 680 905,355,805,030 3,385 5,645 0,60 900 5 585 785,75,565,760,935 4,895 8,805 950 55 400 530 795,060,95,995 3,30 5,980 000 05 70 360 540 70 80,350,50 4,050 050 70 80 40 360 480 540 900,500,700 00 45 0 60 40 30 360 600,000,800 50 30 75 05 55 05 30 385 645,55 00 0 45 65 95 5 40 35 395 705 STNDRD LSS Note: for temperature > 540 valves in class 50 lbs are limited to BW Ends only. Temperature 50 300 400 600 800 900 500 500 4500-9 +38 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 93,3 7,9 5,7 69,0 03,4 3,0 5, 58,6 430,9 775,7 48,9 5,9 49,6 66,5 99,6 3,8 49,3 48,9 44,7 746,7 04,4 3,8 47,9 63,8 95,5,0 43,4 38,9 398, 77, 60,0,7 45,9 6,0 9,7 7,9 37,6 9,3 38,0 687, 35,6 9,7 4,7 55,5 83,4,3 5, 08,6 347,5 65,4 343,3 8,6 40,7 54, 8,0 08,,7 0,7 338, 608,5 37, 7,6 39,3 5, 78,3 04,4 7,6 95,8 36, 587, 398,9 6,6 36,5 49,0 73,4 97,9 0,0 83,4 305,4 549,5 46,7 5,5 35, 46,5 70,0 93,4 05, 75, 9,7 54,7 454,4 4,5 33,4 44,8 67, 89,6 00,7 67,9 79,9 503,7 48, 3,4 3,0 4,4 6, 8,7 93, 54,8 58, 464,7 50,0,4, 9,3 44, 69,3 65,8 0,0 83, 39,9 537,8,4 4,8 0,0 9,6 4,0 44,8 74,5 4, 3,4 565,6,4 0,0 3, 0,0 5, 9,6 49,6 8,7 48,9 593,3,4 6,6 9,0 3, 7,6 0,0 33, 55, 99,3 6,,4 4, 5,5 8,6 9,6,8,4 35,5 63,8 648,9,0,8 3,4 5, 6,5 7,9 3,,7 39,0 SPEIL LSS Note: for temperature > 540 valves in class 50 lbs are limited to BW Ends only. Temperature 50 300 400 600 800 900 500 500 4500-9 +38 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 93,3 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 48,9 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 04,4 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 60,0 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 35,6 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 343,3 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 37, 9,3 50,7 67,6 0,0 34,7 5,7 5,7 4,3 758, 398,9 9,3 50,3 66,9 00,7 34, 50,7 5,3 48,5 753,6 46,7 9,0 49,6 66, 99,3 3,3 48,9 48, 43,7 744,7 454,4 7,9 46,9 6,4 93,4 4,4 40,0 33,4 389, 700,5 48, 5,5 40,3 54, 8,0 07,9,4 0,4 337,5 607, 50,0 0,7 7,6 36,5 54,8 73, 8,4 37,6 8,9 4,3 537,8 7, 8,6 4,8 37, 49,6 55,8 93, 55, 79, 565,6 4,8,4 6,5 4,8 33, 37, 6, 03,4 86, 593,3 3, 8,3,0 6,5, 4,8 4,4 69,0 4, 6,, 5, 7, 0,7 4, 5,9 6,5 44,5 79,6 648,9,4 3, 4,5 6,6 8,6 9,7 6, 7, 48,6 76
PRESSURE-TEMPERTURE RTINS PSI - MTERILS: STM 8 L3 (b) BR - STNDRD LSS Note: for temperature > 000 valves in class 50 lbs are limited to BW Ends only. Temperature 50 300 400 600 800 900 500 500 4500-0 to 00 90 750,000,500,000,50 3,750 6,50,50 00 60 750,000,500,000,50 3,750 6,50,50 300 30 730 970,455,940,85 3,640 6,070 0,95 400 00 705 940,40,880,5 3,530 5,880 0,585 500 70 665 885,330,775,995 3,35 5,540 9,965 600 40 605 805,0,65,85 3,05 5,040 9,070 650 5 590 785,75,570,765,940 4,905 8,85 700 0 570 755,35,55,705,840 4,730 8,55 750 95 530 70,065,40,595,660 4,430 7,970 800 80 50 675,05,355,55,540 4,30 7,60 850 65 485 650 975,300,460,435 4,060 7,305 900 50 450 600 900,00,350,45 3,745 6,740 950 35 375 505 755,005,30,885 3,45 5,665 000 0 60 345 50 695 780,305,70 3,90 050 0 75 35 350 465 55 875,455,65 00 0 0 45 0 95 330 550 95,645 50 0 70 90 35 80 05 345 570,030 00 0 40 55 80 0 5 05 345 65 SPEIL LSS Temperature 50 300 400 600 800 900 500 500 4500-0 to 00 90 750,000,500,000,50 3,750 6,50,50 00 90 750,000,500,000,50 3,750 6,50,50 300 85 740 990,485,980,5 3,705 6,80,0 400 80 75 965,450,935,75 3,60 6,035 0,865 500 75 70 960,440,90,60 3,600 6,000 0,800 600 75 70 960,440,90,60 3,600 6,000 0,800 650 75 75 955,430,905,45 3,580 5,965 0,735 700 75 70 955,45,900,35 3,555 5,930 0,670 750 65 690 90,380,840,070 3,450 5,750 0,350 800 60 675 895,345,795,00 3,365 5,605 0,095 850 45 645 855,85,75,930 3,5 5,355 9,645 900 30 600 800,00,600,800 3,000 5,000 9,000 950 80 470 630 945,60,45,355 3,930 7,070 000 5 35 435 650 865 975,630,75 4,885 050 85 0 90 435 580 655,095,80 3,80 00 55 35 85 75 365 40 685,45,055 50 35 85 5 70 5 55 430 75,85 00 5 50 70 05 40 55 55 430 770 STNDRD LSS Note: for temperature > 540 valves in class 50 lbs are limited to BW Ends only. Temperature 50 300 400 600 800 900 500 500 4500-9 +38 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 93,3 7,9 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 48,9 5,9 50,3 66,9 00,3 33,7 50,7 5,0 48,5 753,3 04,4 3,8 48,6 64,8 97, 9,6 45,8 43,4 405,4 79,8 60,0,7 45,9 6,0 9,7,4 37,6 9,3 38,0 687, 35,6 9,7 4,7 55,5 83,4,3 5, 08,6 347,5 65,4 343,3 8,6 40,7 54, 8,0 08,,7 0,7 338, 608,5 37, 7,6 39,3 5, 78,3 04,4 7,6 95,8 36, 587, 398,9 6,6 36,5 49,0 73,4 97,9 0,0 83,4 305,4 549,5 46,7 5,5 35, 46,5 70,0 86,5 05, 75, 9,7 54,7 454,4 4,5 33,4 44,8 67, 89,6 00,7 67,9 79,9 503,7 48, 3,4 3,0 4,4 6, 8,7 93, 54,8 58, 464,7 50,0,4 5,9 34,8 5, 69,3 77,9 30,0 6,8 390,6 537,8,4 7,9 3,8 35,9 48,0 53,8 90,0 49,6 69,6 565,6,4, 6, 4, 3, 36, 60,3 00,3 8,0 593,3,4 7,6 0,0 5, 0,3,8 37,9 63, 3,4 6,,4 4,8 6, 9,3,4 4, 3,8 39,3 7,0 648,9,4,8 3,8 5,5 7,6 8,6 4, 3,8 4,4 SPEIL LSS Temperature 50 300 400 600 800 900 500 500 4500-9 +38 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 93,3 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 48,9 9,7 5,0 68,3 0,4 36,5 53,4 55,5 46, 766,7 04,4 9,3 50,0 66,5 00,0 33,4 50,0 49,6 46, 749, 60,0 9,0 49,6 66, 99,3 3,4 48,9 48, 43,7 744,7 35,6 9,0 49,6 66, 99,3 3,4 48,9 48, 43,7 744,7 343,3 9,0 49,3 65,8 98,6 3,3 47,9 46,8 4,3 740, 37, 9,0 49,0 65,8 98,3 3,0 47, 45, 408,9 735,7 398,9 8,3 47,6 63,4 95, 6,9 4,7 37,9 396,5 73,6 46,7 7,9 46,5 6,7 9,7 3,8 39,3 3,0 386,5 696, 454,4 6,9 44,5 59,0 88,6 8, 33,,7 369, 665,0 48, 5,9 4,4 55, 8,7 0,3 4, 06,9 344,8 60,6 50,0,4 3,4 43,4 65, 86,9 97,6 6,4 7,0 487,5 537,8 8,6,4 30,0 44,8 59,6 67,,4 87, 336,8 565,6 5,9 5, 0,0 30,0 40,0 45, 75,5 5,5 6, 593,3 3,8 9,3,8 9,0 5, 8,3 47, 78,9 4,7 6,,4 5,9 7,9,7 5,5 7,6 9,6 49,3 88,6 648,9,7 3,4 4,8 7, 9,6 0,7 7,6 9,6 53, 77
PRESSURE-TEMPERTURE RTINS PSI - MTERILS: STM 8 304 (c) - STM 8 304H BR - STNDRD LSS Temperature 50 300 400 600 800 900 500 500 4500-0 to 00 75 70 960,440,90,60 3,600 6,000 0,800 00 30 600 800,00,600,800 3,000 5,000 9,000 300 05 540 70,080,40,60,700 4,500 8,00 400 90 495 660 995,55,490,485 4,40 7,450 500 70 465 60 930,65,395,330 3,880 6,985 600 40 435 580 875,05,30,85 3,640 6,550 650 5 430 575 860,090,90,50 3,580 6,445 700 0 45 565 850,075,75,5 3,540 6,370 750 95 45 555 830,060,45,075 3,460 6,30 800 80 405 540 805,050,0,05 3,360 6,050 850 65 395 530 790,035,90,980 3,300 5,940 900 50 390 50 780,05,65,945 3,40 5,830 950 35 380 50 765,000,45,90 3,80 5,75 000 0 30 430 640 860 965,605,675 4,85 050 0 30 40 65 85 95,545,570 4,630 00 0 55 345 55 685 770,85,45 3,855 50 0 00 65 400 50 595 995,655,985 00 0 55 05 30 45 465 770,85,35 50 0 5 50 5 95 340 565 945,695 300 0 85 5 70 0 55 430 75,85 350 0 60 80 5 65 85 30 55 95 400 0 50 65 95 30 45 40 400 70 450 5 35 45 70 95 05 70 85 55 500 0 5 35 55 65 80 35 30 40 SPEIL LSS Note: for temperature > 000 valves in class 50 lbs are limited to BW Ends only. Temperature 50 300 400 600 800 900 500 500 4500-0 to 00 90 750,000,500,000,50 3,750 6,50,50 00 55 670 890,335,780,005 3,345 5,570 0,030 300 30 600 800,00,600,800 3,000 5,000 9,000 400 0 555 735,05,475,660,765 4,605 8,95 500 00 50 690,035,380,555,595 4,30 7,780 600 85 490 650 975,300,465,440 4,065 7,35 650 85 480 640 960,80,440,395 3,995 7,90 700 80 470 630 945,60,45,355 3,930 7,070 750 75 465 65 95,35,390,35 3,855 6,945 800 75 450 600 900,00,350,50 3,750 6,750 850 70 440 590 885,80,35,05 3,680 6,60 900 65 435 575 865,55,300,65 3,605 6,495 950 65 45 565 850,35,75,0 3,535 6,365 000 55 405 545 85,085,0,035 3,395 6,05 050 50 385 55 770,05,55,930 3,5 5,785 00 5 30 430 645 860 965,605,680 4,80 50 95 50 330 495 660 745,45,070 3,730 00 75 95 55 385 55 580 965,605,895 50 55 40 90 85 380 45 705,80,0 300 40 05 45 5 85 30 535 895,605 350 30 75 05 55 05 30 385 645,55 400 5 60 80 0 60 80 300 500 900 450 5 45 55 85 5 30 5 355 645 500 5 35 45 70 95 05 70 85 55 STNDRD LSS Temperature 50 300 400 600 800 900 500 500 4500-9 +38 9,0 49,6 66, 99,3 3,4 48,9 48, 43,7 744,7 93,3 5,9 4,4 55, 8,7 0,3 4, 06,9 344,8 60,6 48,9 4, 37, 49,6 74,5 97,,7 86, 30,3 558,5 04,4 3, 34, 45,5 68,6 86,5 0,7 7,3 85,5 53,7 60,0,7 3, 4,7 64, 80,3 96, 60,7 67,5 48,6 35,6 9,7 30,0 40,0 60,3 76, 90,3 50,7 5,0 45,6 343,3 8,6 9,6 39,6 59,3 75, 88,9 48, 46,8 444,4 37, 7,6 9,3 39,0 58,6 74, 87,9 46,5 44, 439, 398,9 6,6 8,6 38,3 57, 73, 85,8 43, 38,6 49,6 46,7 5,5 7,9 37, 55,5 7,4 83,4 38,9 3,7 47, 454,4 4,5 7, 36,5 54,5 7,4 8, 36,5 7,5 409,6 48, 3,4 6,9 35,9 53,8 70,7 80,3 34, 3,4 40,0 50,0,4 6, 35, 5,7 68,9 78,9 3,7 9,3 394,7 537,8,4, 9,6 44, 59,3 66,5 0,7 84,4 33,0 565,6,4,4 8,3 4,4 56,9 63,8 06,5 77, 39, 593,3,4 7,6 3,8 35,5 47, 53, 88,6 47,9 65,8 6,,4 3,8 8,3 7,6 35,8 4,0 68,6 4, 05,8 648,9,4 0,7 4,,4 8,6 3, 53, 88,6 59,6 676,7,4 7,9 0,3 5,5 0,3 3,4 39,0 65, 6,9 704,4,4 5,9 7,9,7 5, 7,6 9,6 49,3 88,6 73,,4 4, 5,5 8,6,4,8,4 35,5 63,8 760,0,4 3,4 4,5 6,6 9,0 0,0 6,5 7,6 49,6 787,8,0,4 3, 4,8 6,5 7,,7 9,7 35,5 85,6 0,7,7,4 3,8 4,5 5,5 9,3 5,9 8,3 Note: for temperature > 540 valves in class 50 lbs are limited to BW Ends only. SPEIL LSS Temperature 50 300 400 600 800 900 500 500 4500-9 +38 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 93,3 7,6 46, 6,4 9,0,7 38, 30,6 384, 69,6 48,9 5,9 4,4 55, 8,7 0,3 4, 06,9 344,8 60,6 04,4 5,4 38,3 50,7 76, 0,7 4,5 90,6 37,5 57,9 60,0 3,8 35,9 47,6 7,4 95, 07, 78,9 97,9 536,4 35,6,8 33,8 44,8 67, 89,6 0,0 68, 80,3 504,4 343,3,8 33, 44, 66, 88, 99,3 65, 75,5 495,8 37,,4 3,4 43,4 65, 86,9 97,6 6,4 7,0 487,5 398,9, 3, 4,4 63,8 85, 95,8 59,6 65,8 478,9 46,7, 3,0 4,4 6, 8,7 93, 55, 58,6 465,4 454,4,7 30,3 40,7 6,0 8,4 9,4 5,0 53,7 456,4 48,,4 30,0 39,6 59,6 79,6 89,6 49,3 48,6 447,8 50,0,4 9,3 39,0 58,6 78, 87,9 46, 43,7 438,9 537,8 0,7 7,9 37,6 56, 74,8 84, 40,3 34, 40,9 565,6 0,3 6,5 35,5 53, 70,7 79,6 33,,7 398,9 593,3 8,6, 9,6 44,5 59,3 66,5 0,7 84,8 33,3 6, 6,6 7,,8 34, 45,5 5,4 85,8 4,7 57, 648,9 5, 3,4 7,6 6,5 35,5 40,0 66,5 0,7 99,6 676,7 3,8 9,7 3, 9,7 6, 9,3 48,6 8,4 46, 704,4,8 7, 0,0 4,8 9,6, 36,9 6,7 0,7 73,, 5, 7, 0,7 4, 5,9 6,5 44,5 79,6 760,0,7 4, 5,5 8,3,0,4 0,7 34,5 6, 787,8,0 3, 3,8 5,9 8,0 9,0 4,8 4,5 44,5 85,6,0,4 3, 4,8 6,5 7,,7 9,7 35,5 78
PRESSURE-TEMPERTURE RTINS PSI - MTERILS: STM 8 36 (c) - STM 8 36H BR - STNDRD LSS Temperature 50 300 400 600 800 900 500 500 4500-0 to 00 75 70 960,440,90,60 3,600 6,000 0,800 00 35 60 85,40,655,860 3,095 5,60 9,90 300 5 560 745,0,495,680,795 4,660 8,390 400 95 55 685,05,370,540,570 4,80 7,705 500 70 480 635 955,75,435,390 3,980 7,65 600 40 450 600 900,05,355,55 3,760 6,770 650 5 445 590 890,85,330,0 3,700 6,660 700 0 430 580 870,50,305,70 3,60 6,55 750 95 45 570 855,30,80,35 3,560 6,40 800 80 40 565 845,05,65,0 3,50 6,335 850 65 40 555 835,080,55,090 3,480 6,65 900 50 45 555 830,050,45,075 3,460 6,30 950 35 385 55 775,030,60,930 3,0 5,795 000 0 350 465 700 970,050,750,95 5,45 050 0 345 460 685 960,030,70,865 5,55 00 0 305 405 60 860 95,55,545 4,575 50 0 35 35 475 735 70,85,970 3,550 00 0 85 45 370 550 555 95,545,775 50 0 45 95 95 485 440 735,30,0 300 0 5 55 35 365 350 585 970,750 350 0 95 30 90 75 90 480 800,440 400 0 75 00 50 00 5 380 630,30 450 0 60 80 5 55 75 90 485 875 500 0 40 55 85 0 5 05 345 60 SPEIL LSS Note: for temperature > 000 valves in class 50 lbs are limited to BW Ends only. Temperature 50 300 400 600 800 900 500 500 4500-0 to 00 90 750,000,500,000,50 3,750 6,50,50 00 65 690 90,380,840,070 3,450 5,750 0,350 300 40 65 830,50,665,870 3,0 5,00 9,360 400 0 570 760,40,50,70,850 4,750 8,550 500 05 530 70,065,40,595,655 4,430 7,970 600 95 505 670,005,340,50,50 4,95 7,555 650 90 495 655 985,35,480,465 4,05 7,395 700 85 485 645 970,95,455,40 4,035 7,65 750 80 475 635 950,65,45,380 3,965 7,35 800 80 470 630 945,60,45,355 3,930 7,070 850 80 465 60 930,45,400,330 3,885 6,990 900 75 465 65 95,35,390,35 3,855 6,945 950 75 460 60 95,0,375,90 3,85 6,870 000 60 40 560 840,0,60,05 3,505 6,30 050 60 40 560 840,0,60,05 3,505 6,30 00 45 380 50 765,00,45,905 3,80 5,70 50 5 95 395 590 785 885,480,465 4,435 00 90 30 30 465 60 695,55,930 3,470 50 70 85 45 370 495 555 90,535,765 300 55 45 95 90 385 435 730,5,85 350 45 0 60 40 30 360 600,000,800 400 35 95 5 90 55 85 470 785,45 450 30 75 00 45 95 0 365 60,095 500 0 50 70 05 40 55 60 430 770 STNDRD LSS Temperature 50 300 400 600 800 900 500 500 4500-9 +38 9,0 49,6 66, 99,3 3,4 48,9 48, 43,7 744,7 93,3 6, 4,7 56,9 85,5 4, 8, 3,4 355,8 640,5 48,9 4,8 38,6 5,4 77, 03, 5,8 9,7 3,3 578,5 04,4 3,4 35,5 47, 70,7 94,5 06, 77, 95, 53,3 60,0,7 33, 43,8 65,8 87,9 98,9 64,8 74,4 494,0 35,6 9,7 3,0 4,4 6, 83, 93,4 55,5 59,3 466,8 343,3 8,6 30,7 40,7 6,4 8,7 9,7 53, 55, 459, 37, 7,6 9,6 40,0 60,0 79,3 90,0 49,6 49,6 449, 398,9 6,6 9,3 39,3 59,0 77,9 88,3 47, 45,5 44,0 46,7 5,5 9,0 39,0 58,3 76, 87, 45,5 4,7 436,8 454,4 4,5 9,0 38,3 57,6 74,5 86,5 44, 39,9 43,0 48, 3,4 8,6 38,3 57, 7,4 85,8 43, 38,6 49,6 50,0,4 6,5 35,5 53,4 7,0 80,0 33,,0 399,6 537,8,4 4, 3, 48,3 66,9 7,4 0,7 0,0 36,6 565,6,4 3,8 3,7 47, 66, 7,0 8,6 97,5 355,4 593,3,4,0 7,9 4, 59,3 63, 05, 75,5 35,4 6,,4 6,,7 3,8 50,7 49,0 8,7 35,8 44,8 648,9,4,8 6,9 5,5 37,9 38,3 63,8 06,5 9,3 676,7,4 0,0 3,4 0,3 33,4 30,3 50,7 84,8 5,4 704,4,4 7,9 0,7 6, 5, 4, 40,3 66,9 0,7 73,,4 6,6 9,0 3, 9,0 0,0 33, 55, 99,3 760,0,4 5, 6,9 0,3 3,8 5,5 6, 43,4 79,9 787,8,4 4, 5,5 7,9 0,7, 0,0 33,4 60,3 85,6,4,8 3,8 5,9 7,6 8,6 4, 3,8 4,7 Note: for temperature > 540 valves in class 50 lbs are limited to BW Ends only. SPEIL LSS Temperature 50 300 400 600 800 900 500 500 4500-9 +38 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 93,3 8,3 47,6 63,4 95, 6,9 4,7 37,9 396,5 73,6 48,9 6,5 43, 57, 86, 4,8 8,9 5, 358,5 645,4 04,4 5, 39,3 5,4 78,6 04,8 7,9 96,5 37,5 589,5 60,0 4, 36,5 49,0 73,4 98,0 0,0 83, 305,4 549,5 35,6 3,4 34,8 46, 69,3 9,4 04, 73,8 89, 50,9 343,3 3, 34, 45, 67,9 90,7 0,0 70,0 83,0 509,9 37,,8 33,4 44,5 66,9 89,3 00,3 66,9 78, 500,9 398,9,4 3,8 43,8 65,5 87, 98,3 64, 73,4 49,0 46,7,4 3,4 43,4 65, 86,9 97,6 6,4 7,0 487,5 454,4,4 3, 4,7 64, 85,8 96,5 60,7 67,9 48,0 48,, 3, 4,4 63,8 85, 95,8 59,6 65,8 478,9 50,0, 3,7 4, 63, 84, 94,8 57,9 63,0 473,7 537,8,0 9,0 38,6 57,9 77, 86,9 45, 4,7 435, 565,6,0 9,0 38,6 57,9 77, 86,9 45, 4,7 435, 593,3 0,0 6, 35, 5,7 70,3 78,9 3,3 9,3 394,4 6, 7,9 0,3 7, 40,7 54, 6,0 0,0 70,0 305,8 648,9 6, 5,9,4 3, 4,7 47,9 79,6 33, 39,3 676,7 4,8,8 6,9 5,5 34, 38,3 63,4 05,8 90,6 704,4 3,8 0,0 3,4 0,0 6,5 30,0 50,3 83,8 50,7 73, 3, 8,3,0 6,5, 4,8 4,4 69,0 4, 760,0,4 6,6 8,6 3, 7,6 9,7 3,4 54, 97,6 787,8, 5, 6,9 0,0 3,4 5, 5, 4, 75,5 85,6,4 3,4 4,8 7, 9,6 0,7 7,9 9,6 53, 79
PRESSURE-TEMPERTURE RTINS PSI - MTERILS: STM 8 304 L (d) - STM 8 36 L BR - STNDRD LSS Temperature 50 300 400 600 800 900 500 500 4500 STNDRD LSS Temperature 50 300 400 600 800 900 500 500 4500-0 to 00 30 600 800,00,600,800 3,000 5,000 9,000-9 +38 5,9 4,4 55, 8,7 0,3 4, 06,9 344,8 60,6 00 95 505 675,05,350,50,530 4,0 7,595 93,3 3,4 34,8 46,5 70,0 93, 04,8 74,4 9,0 53,7 300 75 455 605 90,0,360,70 3,780 6,805 48,9, 3,4 4,7 6,7 83,4 93,8 56,5 60,6 469, 400 60 45 550 85,00,40,065 3,440 6,90 04,4,0 8,6 37,9 56,9 75,8 85,5 4,4 37, 46,8 500 45 380 50 765,00,45,90 3,80 5,75 60,0 0,0 6, 35, 5,7 70,3 78,9 3,7 9,3 394,7 600 40 360 480 70 960,080,800 3,000 5,400 35,6 9,7 4,8 33, 49,6 66, 74,5 4, 06,9 37,3 650 5 350 470 700 935,050,750,90 5,55 343,3 8,6 4, 3,4 48,3 64,5 7,4 0,7 0,3 36,3 700 0 345 460 685 95,030,75,860 5,50 37, 7,6 3,8 3,7 47, 63, 7,0 8, 97, 355, 750 95 335 450 670 895,00,680,800 5,040 398,9 6,6 3, 3,0 46, 6,7 69,6 5,8 93, 347,5 800 80 330 440 660 875 985,645,740 4,930 46,7 5,5,8 30,3 45,5 60,3 67,9 3,4 88,9 339,9 850 65 30 430 645 860 965,60,680 4,85 SPEIL LSS Temperature 50 300 400 600 800 900 500 500 4500-0 to 00 55 670 890,340,785,005 3,345 5,570 0,030 454,4 4,5, 9,6 44,5 59,3 66,5,0 84,8 33,7 SPEIL LSS Temperature 50 300 400 600 800 900 500 500 4500-9 +38 7,6 46, 6,4 9,4 3, 38, 30,6 384, 69,6 00 5 565 755,30,505,695,85 4,70 8,480 93,3 4,8 39,0 5, 77,9 03,8 6,9 94,8 34,8 584,7 300 95 505 675,00,350,50,530 4,5 7,585 48,9 3,4 34,8 46,5 69,6 93, 04,8 74,4 90,6 53,0 400 75 460 65 90,30,385,305 3,840 6,90 04,4, 3,7 4,4 63,4 84,8 95,5 58,9 64,8 476,4 500 65 45 570 850,35,80,30 3,550 6,390 60,0,4 9,3 39,3 58,6 78, 88,3 46,9 44,8 440,6 600 55 400 535 805,070,05,00 3,350 6,05 35,6 0,7 7,6 36,9 55,5 73,8 83, 38,6 3,0 45,4 650 50 390 50 780,040,70,950 3,50 5,850 343,3 0,3 6,9 35,9 53,8 7,7 80,7 34,5 4, 403,4 700 45 380 50 765,00,45,90 3,80 5,70 37, 0,0 6, 35, 5,7 70,3 78,9 3,7 9,3 394,4 750 45 375 500 745 995,0,865 3,0 5,595 398,9 0,0 5,9 34,5 5,4 68,6 77, 8,6 4,4 385,8 800 40 365 490 735 980,00,835 3,060 5,505 46,7 9,7 5, 33,8 50,7 67,6 75,8 6,5,0 379,6 850 40 360 480 70 955,075,795,990 5,385 454,4 9,7 4,8 33, 49,6 65,8 74, 3,8 06, 37,3 80
PRESSURE-TEMPERTURE RTINS PSI - MTERILS: STM 8 3 (f) - STM 8 3H (g) BR - STNDRD LSS Temperature 50 300 400 600 800 900 500 500 4500-0 to 00 75 70 960,440,90,60 3,600 6,000 0,800 00 45 645 860,90,70,935 3,30 5,380 9,685 300 30 595 795,90,585,785,975 4,960 8,930 400 00 550 735,05,470,655,760 4,600 8,80 500 70 55 685,030,375,545,570 4,85 7,75 600 40 485 650 975,300,460,435 4,060 7,30 650 5 480 635 955,75,435,390 3,980 7,65 700 0 465 60 930,40,395,330 3,880 6,985 750 95 460 60 95,0,375,90 3,80 6,875 800 80 450 600 900,05,355,55 3,760 6,770 850 65 445 595 895,90,340,30 3,70 6,695 900 50 440 590 885,80,35,0 3,680 6,65 950 35 385 55 775,030,60,930 3,0 5,795 000 0 355 475 75 950,070,785,970 5,350 050 0 35 45 65 835 940,565,605 4,690 00 0 70 360 545 75 85,360,65 4,075 50 0 35 35 475 630 70,85,970 3,550 00 0 85 45 370 495 555 95,545,775 50 0 40 85 80 375 40 705,70,0 300 0 0 45 0 95 330 550 95,645 350 0 85 5 70 5 55 430 75,85 400 0 65 85 30 75 95 35 545 975 450 0 50 70 05 40 55 55 430 770 500 0 40 50 75 00 5 90 35 565 SPEIL LSS Note: for temperature > 000 valves in class 50 lbs are limited to BW Ends only. Temperature 50 300 400 600 800 900 500 500 4500-0 to 00 90 750,000,500,000,50 3,750 6,50,50 00 60 680 90,365,80,045 3,405 5,680 0,0 300 35 60 80,5,60,85 3,045 5,070 9,30 400 0 555 735,05,475,660,765 4,605 8,95 500 95 55 685,030,375,545,570 4,85 7,75 600 85 490 650 975,300,465,445 4,070 7,330 650 85 480 640 960,80,440,400 4,000 7,00 700 80 470 630 945,60,45,355 3,930 7,070 750 80 465 65 935,45,400,335 3,895 7,005 800 75 465 65 95,35,390,35 3,855 6,945 850 75 460 60 95,0,375,95 3,80 6,880 900 75 455 605 90,5,365,70 3,785 6,85 950 75 455 605 90,5,365,70 3,785 6,85 000 60 40 560 840,0,60,05 3,505 6,30 050 55 405 545 85,085,0,035 3,395 6,05 00 35 355 470 705 940,060,770,945 5,305 50 5 95 395 590 780 885,480,465 4,435 00 90 30 30 465 60 695,55,930 3,470 50 65 75 35 350 465 55 880,465,635 300 55 35 85 75 363 40 685,45,055 350 40 05 45 5 85 30 535 895,605 400 30 80 0 65 0 45 405 680,0 450 5 65 85 30 75 95 30 535 965 500 0 45 65 95 5 40 35 395 705 STNDRD LSS Note: for temperature > 540 valves in class 50 lbs are limited to BW Ends only. Temperature 50 300 400 600 800 900 500 500 4500-9 +38 9,0 49,6 66, 99,3 3,4 49,0 48, 43,7 744,7 93,3 6,9 44,5 59,3 89,0 8,6 33,4,7 370,9 667,8 48,9 5,9 4,0 54,8 8,0 09,3 3, 05, 34,0 65,7 04,4 3,8 38,0 50,7 76, 0,3 4, 90,3 37, 57,0 60,0,7 35,5 47, 7,0 94,8 06,5 77, 95,5 53,0 35,6 9,6 33,4 44,8 67, 89,6 00,7 67,9 80 504 343,3 8,6 33, 43,8 65,8 87,9 99,0 64,8 74,4 494 37, 7,6 3, 65,8 64, 85,5 96, 60,6 67,5 48,6 398,9 6,5 3,7 4,0 63, 84, 94,8 57,9 63,4 474,0 46,7 5,5 3,0 4,4 6,0 83, 93,4 55,5 59, 466,8 454,4 4,5 30,7 4,0 6,7 8,0 9,4 53,7 56,5 46,6 48, 3,4 30,3 40,7 6,0 8,4 9,3 5,4 53,7 456,8 50,0,4 6,5 35,5 53,4 7,0 80,0 33,,0 399,6 537,8,4 4,5 3,7 49,3 65,5 73,8 3, 04,8 368,9 565,6,4,7 8,6 43, 57,6 64,8 07,9 79,6 33,4 593,3,4 8,6 4,8 37,6 50,0 56, 93,8 56, 8,0 6,,4 6,,7 3,7 43,4 49,0 8,7 35,8 44,8 648,9,4,7 6,9 5,5 34, 38,3 63,8 06,5 9,3 676,7,4 9,6,7 9,3 5,8 9,0 48,6 80,7 45,5 704,4,4 7,6 0,0 5, 0,3,7 37,9 63, 3,4 73,,4 5,9 7,9,7 5,5 7,6 9,6 49,3 88,6 760,0,4 4,5 5,9 9,0, 3,4,4 37,6 67, 787,8,4 3,4 4,8 7, 9,6 0,7 7,6 9,6 53, 85,6,4,6 3,4 5, 6,9 7,9 3,,7 39,0 SPEIL LSS Temperature 50 300 400 600 800 900 500 500 4500-9 +38 0,0 5,7 68,9 03,4 37,9 55, 58,6 43,0 775,7 93,3 7,9 46,9 6,7 94, 5,5 4,0 34,8 39,6 704,7 48,9 6, 4 55,8 83,8,7 5,8 0,0 349,6 69,5 04,4 4,5 38,3 50,7 76, 0,7 4,4 90,6 37,5 57,0 60,0 3,4 35,5 47, 7,0 94,8 06,5 77, 95,4 53,9 35,6,7 33,8 44,8 67, 89,6 0,0 68,6 80,6 505,4 343,3,7 33, 44, 66, 88, 99,3 65,5 75,8 496,4 37,,4 3,4 43,4 65, 86,9 97,6 6,4 7,0 487,5 398,9,4 3, 43, 64,5 85,9 96,5 6,0 68,6 483,0 46,7, 3, 4,4 63, 85, 95,8 59,6 65,8 478,8 454,4, 3,7 4,0 6,7 84, 94,8 58, 63,4 474,4 48,, 3, 4,7 6,7 83,8 94, 56,5 6,0 469,9 50,0, 3, 4,7 6,8 83,8 94, 56,5 6,0 469,9 537,8,0 9,0 38,6 57,9 77, 86,9 45, 4,7 435, 565,6 0,7 7,9 37,6 56, 74,8 84, 40,3 34, 4,0 593,3 9,3 4,5 3,4 48,6 64,8 73,,0 03,0 365,8 6, 7,9 0,3 7, 40,7 53,8 6,0 0,0 70,0 305, 648,9 6, 5,8,4 3, 4,7 47,9 79,6 33, 39, 676,7 4,5, 6, 4, 3, 36, 60,7 0,0 8,7 704,4 3,8 9,3,7 9,0 5,0 8,3 47, 79,0 4,7 73,,7 7, 0,0 4,8 9,6, 36,9 6,7 0,7 760,0, 5,5 7,6,4 5, 6,9 7,9 46,9 84, 787,8,7 4,5 5,9 9,0, 3,4, 36,9 66,5 85,6,4 3, 4,5 6,5 8,6 9,6 6, 7, 48,6 8
PRESSURE-TEMPERTURE RTINS PSI - MTERILS: STM 8 347 (f) - STM 8 347H (g) BR - STNDRD LSS Note: for temperature > 000 valves in class 50 lbs are limited to BW Ends only. Temperature 50 300 400 600 800 900 500 500 4500-0 to 00 75 70 960,440,90,60 3,600 6,000 0,800 00 55 660 880,30,760,980 3,300 5,500 9,900 300 30 65 80,30,640,845 3,070 5,0 9,5 400 00 575 765,45,530,70,870 4,780 8,605 500 70 540 70,080,440,60,700 4,500 8,00 600 40 55 685,05,370,540,570 4,80 7,705 650 5 505 670,00,345,50,50 4,00 7,560 700 0 495 660 990,30,485,470 4,0 7,45 750 95 490 655 985,30,475,460 4,00 7,380 800 80 485 650 975,300,460,435 4,060 7,30 850 65 485 645 970,95,455,45 4,040 7,70 900 50 450 600 900,00,350,45 3,745 6,740 950 35 385 55 775,030,60,930 3,0 5,795 000 0 365 485 75 970,090,80 3,030 5,450 050 0 360 480 70 960,080,800 3,000 5,400 00 0 35 430 645 860 965,60,685 4,835 50 0 75 365 550 735 85,370,85 4,5 00 0 70 30 345 460 55 855,430,570 50 0 5 65 45 330 370 65,030,850 300 0 95 5 85 50 80 465 770,390 350 0 70 90 35 80 05 345 570,030 400 0 55 75 0 45 65 75 455 85 450 5 40 55 80 0 5 05 345 65 500 5 35 45 70 95 05 70 85 55 SPEIL LSS Temperature 50 300 400 600 800 900 500 500 4500-0 to 00 90 750,000,500,000,50 3,750 6,50,50 00 75 75 955,430,905,45 3,580 5,965 0,735 300 50 655 875,30,745,965 3,80 5,465 9,835 400 35 65 85,35,645,850 3,085 5,45 9,55 500 30 595 795,90,585,785,980 4,965 8,935 600 0 575 765,45,530,70,865 4,775 8,600 650 5 565 750,5,500,690,85 4,690 8,440 700 0 550 735,05,47,655,760 4,600 8,75 750 0 550 730,095,460,645,745 4,570 8,30 800 0 545 75,090,450,630,70 4,530 8,55 850 05 540 70,080,445,65,705 4,50 8,5 900 05 540 70,075,435,65,690 4,485 8,075 950 80 470 630 945,60,45,360 3,930 7,070 000 60 40 560 840,0,60,05 3,505 6,30 050 60 40 560 840,0,60,05 3,505 6,30 00 55 405 540 805,075,0,05 3,360 6,045 50 30 345 455 685 95,030,75,855 5,45 00 80 5 85 430 757 645,070,785 3,5 50 60 55 05 30 45 465 770,85,35 300 45 5 55 30 305 345 580 965,735 350 35 85 5 70 5 55 430 75,85 400 5 70 90 35 80 05 345 570,030 450 0 50 70 05 40 55 55 430 770 500 5 45 55 85 5 30 5 355 645 STNDRD LSS Note: for temperature > 540 valves in class 50 lbs are limited to BW Ends only. Temperature 50 300 400 600 800 900 500 500 4500-9 +38 9,0 49,6 66, 99,3 3,4 49,0 48, 43,7 744,6 93,3 7,6 45,5 60,7 9,0,3 36,5 7,5 379, 68,6 48,9 5,8 4,4 56,5 84,8 3, 7,,7 353,0 635,4 04,4 3,8 39,6 5,7 79,0 05,5 8,6 97,9 39,7 593,3 60,0,7 37, 49,6 74,5 99,3,7 86, 30,3 558,5 35,6 9,6 35,5 47, 70,7 94,5 06, 77, 95, 53, 343,3 8,6 34,8 46, 69,6 9,8 04, 73,7 89,6 5,3 37, 7,6 34, 45,5 68,3 9,0 0,4 70,3 84, 5,3 398,9 6,5 33,8 45, 67,9 90,3 0,7 69,6 8,7 508,8 46,7 5,5 33,4 44,8 67, 89,6 00,7 67,9 80,0 504,3 454,4 4,5 33,4 44,5 66,9 89,3 0,0,3 67, 78,5 50,3 48, 3,4 3,0 4,4 6,0 8,7 93, 54,8 58, 464,7 50,0,4 6,5 35,5 53,4 7,0 80,0 33,,0 399,6 537,8,4 5, 33,4 50,0 66,9 75, 5,5 08,9 375,8 565,6,4 4,8 33, 49,6 66, 74,5 4, 06,8 37,3 593,3,4,4 9,6 44,5 59,3 66,5,0 85, 333,4 6,,4 9,0 5, 37,9 50,7 56,9 94,5 57,5 83,7 648,9,4,7 5,8 3,8 3,7 35,5 58,9 98,6 77, 676,7,4 8,6,4 6,9,7 5,5 4,4 7,0 7,5 704,4,4 6,5 8,6,7 7, 9,3 3, 53, 95,8 73,,4 4,8 6, 9,3,4 4, 3,8 39,3 7,0 760,0,4 3,8 5, 7,6 0,0,4 9,0 3,4 56,9 787,8,0,7 3,8 5,5 7,6 8,6 4, 3,8 4,4 85,6,0,4 3, 4,8 6,5 7,,7 9,6 35,5 SPEIL LSS Temperature 50 300 400 600 800 900 500 500 4500-9 +38 0,0 5,7 68,9 03,4 37,9 55, 58,6 43,0 775,7 93,3 9,0 49,3 65,8 98,6 3,3 47,9 46,9 4,3 740, 48,9 7, 45, 60,3 90,3 0,3 35,5 6, 376,8 678, 04,4 6, 4,4 56,9 85, 3,4 7,5,7 354,7 638, 60,0 5,8 4,0 54,8 8,0 09,3 3, 05,5 34,3 66, 35,6 5, 39,6 5,7 78,9 05,5 8,6 97,5 39, 593,0 343,3 4,8 38,9 5,7 77,6 03,4 6,5 94, 33,4 58,9 37, 4,5 37,9 50,7 76, 0,5 4, 90,3 37, 570, 398,9 4,5 37,9 50,3 75,5 00,7 3,4 89,3 35, 567,4 46,7 4,5 37,6 50,0 75, 00,0,4 87,5 3,3 56,3 454,4 4, 37, 49,6 74,5 99,6,0 86,5 3,0 559,5 48, 4, 37, 49,6 74, 99,0,3 85,5 309, 556,8 50,0,4 3,4 43,4 65, 86,9 97,6 6,7 7,0 487,5 537,8,0 8,9 38,6 57,9 77, 86,9 45, 4,7 435, 565,6,0 8,9 38,6 57,9 77, 86,9 45, 4,7 435, 593,3 0,7 7,9 37, 55,5 74, 83,4 39,0 3,7 46,8 6, 9,0 3,8 3,4 47, 63, 7,0 8, 96,8 354,7 648,9 5,5 4,8 9,6 9,6 5, 44,5 73,8 3,,7 676,7 4, 0,7 4,,4 8,6 3, 53, 88,6 59,6 704,4 3, 7,9 0,7 5,8,0 3,8 40,0 66,5 9,6 73,,4 5,9 7,9,7 5,5 7,6 9,6 49,3 88,6 760,0,7 4,8 6, 9,3,4 4, 3,8 39,3 7,0 787,8,4 3,4 4,8 7, 9,6 0,7 7,6 9,6 53, 85,6,0 3, 3,8 5,9 7,9 9,0 4,8 4,5 44,5 8
PRESSURE-TEMPERTURE RTINS PSI - MTERILS: STM 8 44 - STM 8 5 (e) - STM 8 53 (e) BR - STNDRD LSS Temperature 50 300 400 600 800 900 500 500 4500-0 to 00 90 750,000,500,000,50 3,750 6,50,50 00 60 70 960,440,90,60 3,600 6,000 0,800 300 30 665 885,330,773,995 3,35 5,540 9,970 400 00 65 80,30,640,845 3,070 5,0 9,5 500 70 575 770,50,537,730,880 4,800 8,640 600 40 555 740,5,485,670,785 4,640 8,350 650 5 550 735,00,467,650,750 4,580 8,45 700 0 540 75,085,445,65,70 4,50 8,35 750 95 530 70,065,48,595,660 4,430 7,970 SPEIL LSS Temperature 50 300 400 600 800 900 500 500 4500-0 to 00 90 750,000,500,000,50 3,750 6,50,50 00 90 750,000,500,000,50 3,750 6,50,50 300 85 740 990,485,980,5 3,70 6,85,30 400 65 685 95,370,85,055 3,430 5,75 0,85 500 45 645 855,85,75,930 3,5 5,355 9,645 600 40 60 830,45,660,865 3,05 5,80 9,30 650 35 65 80,5,635,840 3,065 5,0 9,00 700 30 605 805,0,65,85 3,05 5,045 9,080 750 30 595 795,95,590,790,985 4,980 8,960 STNDRD LSS Temperature 50 300 400 600 800 900 500 500 4500-9 +38 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 93,3 7,9 49,6 66, 99,3 3,4 48,9 48, 43,7 744,7 48,9 5,9 45,9 6,0 9,7, 37,6 9,3 38,0 687,4 04,4 3,8 4,4 56,5 84,8 3, 7,,7 353,0 635,4 60,0,7 39,6 53, 79,3 06,0 9,3 98,6 33,0 595,7 35,6 9,7 38,3 5,0 76,9 0,4 5, 9,0 39,9 575,7 343,3 8,6 37,9 50,7 75,8 0, 3,8 89,6 35,8 568,5 37, 7,6 37, 50,0 74,8 99,6,0 86,9 3,7 560,9 398,9 6,6 36,5 49,0 73,4 97,8 0,0 83,4 305,4 549,5 SPEIL LSS Temperature 50 300 400 600 800 900 500 500 4500-9 +38 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 93,3 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 48,9 9,7 5,0 68,3 0,4 36,5 53,4 55,8 46,5 767,4 04,4 8,3 47, 63, 94,5 5,8 4,7 36,5 394,0 709, 60,0 6,9 44,5 59,0 88,6 8, 33,,7 369, 665,0 35,6 6,5 4,7 57, 85,8 4,4 8,6 4, 357, 64,6 343,3 6, 4,4 56,5 84,5,7 6,9,3 35,3 634,3 37, 5,9 4,7 55,5 83,4,3 5, 08,6 347,9 66, 398,9 5,9 4,0 54,8 8,4 09,6 3,4 05,8 343,4 67,8 PSI - MTERILS: STM B564 N06600 BR - STNDRD LSS Note: for temperature > 000 valves in class 50 lbs are limited at BW End only. Temperature 50 300 400 600 800 900 500 500 4500-0 to 00 90 750,000,500,000,50 3,750 6,50,50 00 60 750,000,500,000,50 3,750 6,50,50 300 30 730 970,455,94,85 3,640 6,070 0,95 400 00 705 940,40,880,5 3,530 5,880 0,585 500 70 665 885,330,773,995 3,35 5,540 9,965 600 40 605 805,0,63,85 3,05 5,040 9,070 650 5 590 785,75,568,765,940 4,905 8,85 700 0 570 755,35,55,705,840 4,730 8,55 750 95 530 70,065,48,595,660 4,430 7,970 800 80 50 675,05,355,55,540 4,30 7,60 850 65 485 650 975,98,460,435 4,060 7,305 900 50 450 600 900,00,350,45 3,745 6,740 950 35 35 435 655 87 980,635,75 4,905 000 0 5 90 430 577 650,080,800 3,40 050 0 40 85 80 370 45 695,55,085 00 0 95 5 85 48 80 465 770,390 50 0 70 90 35 8 05 340 565,070 00 0 60 80 5 65 85 30 55 95 SPEIL LSS Temperature 50 300 400 600 800 900 500 500 4500-0 to 00 90 750,000,500,000,50 3,750 6,50,50 00 90 750,000,500,000,50 3,750 6,50,50 300 90 750,000,500,000,50 3,750 6,50,50 400 90 750,000,500,000,50 3,750 6,50,50 500 90 750,000,500,000,50 3,750 6,50,50 600 85 745 995,495,990,40 3,735 6,30,0 650 80 735 980,470,955,00 3,670 6,5,00 700 75 75 965,445,930,70 3,65 6,05 0,850 750 70 70 945,40,895,30 3,550 5,95 0,645 800 70 700 930,400,865,095 3,495 5,85 0,485 850 60 680 905,355,805,030 3,385 5,645 0,60 900 30 600 800,00,600,800 3,000 5,000 9,000 950 65 45 570 850,35,80,30 3,550 6,390 000 0 80 375 565 750 845,405,345 4,0 050 70 80 40 360 480 540 905,505,70 00 45 0 60 40 30 360 605,005,80 50 35 90 0 75 35 65 440 735,35 00 30 80 05 60 5 40 400 670,05 STNDRD LSS Temperature 50 300 400 600 800 900 500 500 4500-9 +38 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 93,3 7,9 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 48,9 5,9 50,3 66,9 00,3 33,9 50,7 5,0 48,5 753,3 04,4 3,8 48,6 64,8 97, 9,6 45,8 43,4 405,4 79,8 60,0,7 45,9 6,0 9,7, 37,6 9,3 38,0 687, 35,6 9,7 4,7 55,5 83,4, 5, 08,6 347,5 65,4 343,3 8,6 40,7 54, 8,0 08,,7 0,7 338, 608,5 37, 7,6 39,3 5, 78,3 04,5 7,6 95,8 36, 587, 398,9 6,6 36,5 49,0 73,4 97,8 0,0 83,4 305,4 549,5 46,7 5,5 35, 46,5 70,0 93,4 05, 75, 9,7 54,7 454,4 4,5 33,4 44,8 67, 89,5 00,7 67,9 79,9 503,7 48, 3,4 3,0 4,4 6, 8,7 93, 54,8 58, 464,7 50,0,4,4 30,0 45, 60, 67,6,7 87,9 338, 537,8,4 4,8 0,0 9,6 39,8 44,8 74,5 4, 3,4 565,6,4 9,7,8 9,3 5,5 8,6 47,9 79,6 43,8 593,3,4 6,6 8,6,8 7, 9,3 3, 53, 95,8 6,,4 4,8 6, 9,3,5 4, 3,4 39,0 73,8 648,9,4 4, 5,5 8,6,4,8,4 35,5 63,8 SPEIL LSS Temperature 50 300 400 600 800 900 500 500 4500-9 +38 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 93,3 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 48,9 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 04,4 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 60,0 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 35,6 9,7 5,4 68,6 03, 37, 54,4 57,5 49,6 77,9 343,3 9,3 50,7 67,6 0,4 34,8 5,7 53,0 4,6 759, 37, 9,0 50,0 66,5 99,6 33, 49,6 49,3 45,4 748, 398,9 8,6 49,0 65, 97,9 30,7 46,9 44,8 407,8 734,0 46,7 8,6 48,3 64, 96,5 8,6 44,5 4,0 40,6 7,9 454,4 7,9 46,9 6,4 93,4 4,5 40,0 33,4 389, 700,5 48, 5,9 4,4 55, 8,7 0,3 4, 06,9 344,8 60,6 50,0,4 9,3 39,3 58,6 78,6 88,3 46,9 44,8 440,6 537,8 7,6 9,3 5,9 39,0 5,7 58,3 96,9 6,7 9,0 565,6 4,8,4 6,5 4,8 33, 37, 6,4 03,8 86,9 593,3 3, 8,3,0 6,5, 4,8 4,7 69,3 4,8 6,,4 6, 8,3, 6, 8,3 30,3 50,7 9,4 648,9, 5,5 7,,0 4,8 6,5 7,6 46, 83, Note: for temperature > 540 valves in class 50 lbs are limited at BW End only. 83
PRESSURE-TEMPERTURE RTINS PSI - MTERILS: STM B564 N08800 BR - STNDRD LSS Temperature 50 300 400 600 800 900 500 500 4500-0 to 00 75 70 960,440,90,60 3,600 6,000 0,800 00 55 660 885,35,768,990 3,30 5,50 9,935 300 30 65 830,50,663,870 3,0 5,00 9,360 400 00 600 800,00,600,800 3,000 5,000 9,000 500 70 580 770,55,54,735,890 4,80 8,875 600 40 575 765,45,58,70,870 4,780 8,605 650 5 570 760,40,57,705,845 4,740 8,530 700 0 565 750,30,503,690,80 4,700 8,460 750 95 530 70,065,48,595,660 4,430 7,970 800 80 505 675,05,35,50,535 4,30 7,60 850 65 485 650 975,98,460,435 4,060 7,305 900 50 450 600 900,00,350,45 3,745 6,740 950 35 385 55 775,03,60,930 3,0 5,795 000 0 365 485 75 968,090,80 3,030 5,450 050 0 360 480 70 960,080,800 3,000 5,400 00 0 35 430 645 858 965,60,685 4,835 50 0 75 365 550 733 85,370,85 4,5 00 0 05 70 405 54 60,00,695 3,055 50 0 30 75 60 347 390 650,080,945 300 0 60 80 5 65 85 30 55 95 350 0 50 65 00 33 50 45 40 740 400 5 35 45 70 90 00 70 85 50 450 0 30 40 60 83 95 55 55 465 500 0 5 35 50 67 75 5 05 370 SPEIL LSS Note: for temperature > 000 valves in class 50 lbs are limited to BW Ends only. Temperature 50 300 400 600 800 900 500 500 4500-0 to 00 90 750,000,500,000,50 3,750 6,50,50 00 85 740 985,480,975,0 3,695 6,60,090 300 65 695 930,395,860,090 3,480 5,805 0,445 400 55 670 895,340,785,00 3,350 5,580 0,045 500 45 645 860,90,70,935 3,30 5,380 9,685 600 45 640 855,80,705,90 3,00 5,335 9,605 650 45 635 845,70,695,905 3,75 5,90 9,50 700 40 630 840,60,680,890 3,45 5,45 9,440 750 40 65 830,50,665,870 3,0 5,00 9,360 800 35 65 80,30,645,850 3,080 5,35 9,40 850 35 65 80,30,640,845 3,075 5,5 9,0 900 30 600 800,00,600,800 3,000 5,000 9,000 950 80 470 630 945,60,45,360 3,930 7,070 000 60 40 560 840,0,60,05 3,505 6,30 050 60 40 560 840,0,60,05 3,505 6,30 00 55 405 540 805,075,0,05 3,360 6,045 50 30 345 460 685 95,030,75,860 5,45 00 00 60 345 55 685 770,85,45 3,860 50 65 70 5 335 450 505 845,405,530 300 30 80 05 60 5 40 400 670,05 350 5 65 85 30 75 95 30 535 965 400 5 45 60 90 0 35 0 370 665 450 5 40 55 80 05 0 00 335 605 500 0 30 45 65 85 95 60 70 480 STNDRD LSS Temperature 50 300 400 600 800 900 500 500 4500-9 +38 9,0 49,6 66, 99,3 3,4 48,9 48, 43,7 744,7 93,3 7,6 45,5 6,0 9,4,9 37, 8, 380,6 685,0 48,9 5,9 43, 57, 86, 4,7 8,9 5, 358,5 645,4 04,4 3,8 4,4 55, 8,7 0,3 4, 06,9 344,8 60,6 60,0,7 40,0 53, 79,6 06,3 9,6 99,3 33,3 6,9 35,6 9,7 39,6 5,7 78,9 05,3 8,6 97,9 39,6 593,3 343,3 8,6 39,3 5,4 78,6 04,6 7,6 96, 36,8 588, 37, 7,6 39,0 5,7 77,9 03,6 6,5 94,4 34, 583,3 398,9 6,6 36,5 49,0 73,4 97,8 0,0 83,4 305,4 549,5 46,7 5,5 34,8 46,5 70,0 93, 04,8 74,8 9,7 54,7 454,4 4,5 33,4 44,8 67, 89,5 00,7 67,9 79,9 503,7 48, 3,4 3,0 4,4 6, 8,7 93, 54,8 58, 464,7 50,0,4 6,5 35,5 53,4 7, 80,0 33,,0 399,6 537,8,4 5, 33,4 50,0 66,7 75, 5,5 08,9 375,8 565,6,4 4,8 33, 49,6 66, 74,5 4, 06,9 37,3 593,3,4,4 9,6 44,5 59, 66,5,0 85, 333,4 6,,4 9,0 5, 37,9 50,5 56,9 94,5 57,6 83,7 648,9,4 4, 8,6 7,9 37,4 4, 70,3 6,9 0,6 676,7,4 9,0, 7,9 3,9 6,9 44,8 74,5 34, 704,4,4 4, 5,5 8,6,4,8,4 35,5 63,8 73,,4 3,4 4,5 6,9 9, 0,3 6,9 8,3 5,0 760,0,0,4 3, 4,8 6, 6,9,7 9,7 35, 787,8 0,7,,8 4, 5,7 6,6 0,7 7,6 3, 85,6 0,7,7,4 3,4 4,6 5, 8,6 4, 5,5 Note: for temperature > 540 valves in class 50 lbs are limited to BW Ends only. SPEIL LSS Temperature 50 300 400 600 800 900 500 500 4500-9 +38 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 93,3 9,7 5,0 67,9 0,0 36, 53, 54,8 44,7 764,7 48,9 8,3 47,9 64, 96, 8, 44, 39,9 400,3 70, 04,4 7,6 46, 6,7 9,4 3,0 38,6 3,0 384,7 69,6 60,0 6,9 44,5 59,3 88,9 8,6 33,4,7 37,0 667,8 35,6 6,9 44, 59,0 88,3 7,5, 3,4 0,6 367,8 66,3 343,3 6,9 43,8 58,3 87,6 6,9 3,3 8,9 364,7 656,4 37, 6,5 43,4 57,9 86,9 5,8 30,3 6,8 36,6 650,9 398,9 6,5 43, 57, 86, 4,8 8,9 5, 358,5 645,4 46,7 6, 4,4 56,5 84,8 3,4 7,6,4 354, 637, 454,4 6, 4,4 56,5 84,8 3, 7,,0 353,4 635,7 48, 5,9 4,4 55, 8,7 0,3 4, 06,9 344,8 60,6 50,0,4 3,4 43,4 65, 86,9 97,6 6,7 7,0 487,5 537,8,0 9,0 38,6 57,9 77, 86,9 45, 4,7 435, 565,6,0 9,0 38,6 57,9 77, 86,9 45, 4,7 435, 593,3 0,7 7,9 37, 55,5 74, 83,4 38,9 3,7 46,8 6, 9,0 3,8 3,7 47, 63, 7,0 8, 97, 354,7 648,9 6,9 7,9 3,8 35,5 47, 53, 88,6 47,9 66, 676,7 4,5,7 5,5 3, 3,0 34,8 58,3 96,9 74,4 704,4, 5,5 7,,0 4,8 6,5 7,6 46, 83, 73,,7 4,5 5,9 9,0, 3,4, 36,9 66,5 760,0,0 3, 4, 6, 8,3 9,3 5, 5,5 45,9 787,8,0,8 3,8 5,5 7, 8,3 3,8 3, 4,7 85,6 0,7, 3, 4,5 5,9 6,6,0 8,6 33, 84
PRESSURE-TEMPERTURE RTINS PSI - MTERILS: STM B564 N0665 (h) BR - STNDRD LSS Note: for temperature > 000 valves in class 50 lbs are limited to BW Ends only. Temperature 50 300 400 600 800 900 500 500 4500-0 to 00 90 750,000,500,000,50 3,750 6,50,50 00 60 750,000,500,000,50 3,750 6,50,50 300 30 730 970,455,94,85 3,640 6,070 0,95 400 00 705 940,40,880,5 3,530 5,880 0,585 500 70 665 885,330,773,995 3,35 5,540 9,965 600 40 605 805,0,63,85 3,05 5,040 9,070 650 5 590 785,75,568,765,940 4,905 8,85 700 0 570 755,35,55,705,840 4730 8,55 750 95 530 70,065,48,595,60 4,430 7,970 800 80 50 675,05,355,55,540 4,30 7,60 850 65 485 650 975,98,460,435 4,060 7,305 900 50 450 600 900,00,350,45 3,745 6,740 950 35 385 55 775,03,60,930 3,0 5,795 000 0 365 485 75 968,090,80 3,030 5,450 050 0 360 480 70 960,080,800 3,000 5,400 00 0 35 430 645 858 965,60,685 4,835 50 0 75 365 550 733 85,370,85 4,5 00 0 85 45 370 493 555 95,545,775 50 0 45 95 95 39 440 735,0,00 300 0 0 45 5 88 35 540 900,60 SPEIL LSS Temperature 50 300 400 600 800 900 500 500 4500-0 to 00 90 750,000,500,000,50 3,750 6,50,50 00 90 750,000,500,000,50 3,750 6,50,50 300 90 750,000,500,000,50 3,750 6,50,50 400 90 750,000,500,000,50 3,750 6,50,50 500 85 740 990,485,980,5 3,70 6,85,30 600 75 75 965,445,930,70 3,65 6,05 0,850 650 70 70 945,40,895,30 3,550 5,95 0,645 700 65 695 930,395,860,090 3,480 5,805 0,445 750 65 690 90,380,845,075 3,455 5,760 0,365 800 65 685 95,370,85,055 3,430 5,75 0,85 850 60 675 900,350,800,05 3,375 5,65 0,5 900 30 600 800,00,600,800 3,000 5,000 9,000 950 80 470 630 945,60,45,360 3,930 7,070 000 60 40 560 840,0,60,05 3,505 6,30 050 60 40 560 840,0,60,05 3,505 6,30 00 55 405 540 805,075,0,05 3,360 6,045 50 30 345 460 685 95,030,75,860 5,45 00 90 40 30 480 645 75,05,00 3,65 50 75 90 55 380 50 575 955,590,865 300 55 40 90 80 375 40 705,70,0 STNDRD LSS Note: for temperature > 540 valves in class 50 lbs are limited to BW Ends only. Temperature 50 300 400 600 800 900 500 500 4500-9 +38 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 93,3 7,9 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 48,9 5,9 50,3 66,9 00,3 33,9 50,7 5,0 48,5 753,3 04,4 3,8 48,6 64,8 97, 9,6 45,8 43,4 405,4 79,8 60,0,7 45,9 6,0 9,7, 37,6 9,3 38,0 687, 35,6 9,7 4,7 55,5 83,4, 5, 08,6 347,5 65,4 343,3 8,6 40,7 54, 8,0 08,,7 0,7 338, 608,5 37, 7,6 39,3 5, 78,3 04,4 7,6 95,8 36, 587, 398,9 6,6 36,5 49,0 73,4 97,8 0,0 83,4 305,4 549,5 46,7 5,5 35, 46,5 70,0 93,4 05, 75, 9,7 54,7 454,4 4,5 33,4 44,8 67, 89,5 00,7 67,9 79,9 503,7 48, 3,4 3,0 4,4 6, 8,7 93, 54,8 58, 464,7 50,0,4 6,5 35,5 53,4 7, 80,0 33,,0 399,6 537,8,4 5, 33,4 50,0 66,7 75, 5,5 08,9 375,8 565,6,4 4,8 33, 49,6 66, 74,5 4, 06,9 37,3 593,3,4,4 9,6 44,5 59, 66,5,0 85, 333,4 6,,4 9,0 5, 37,9 50,5 56,9 94,5 57,6 83,7 648,9,4,8 6,9 5,5 34,0 38,3 63,8 06,5 9,3 676,7,4 0,0 3,4 0,3 7,0 30,3 50,7 84, 5,7 704,4,4 7,6 0,0 4,8 9,8,4 37, 6,,7 SPEIL LSS Temperature 50 300 400 600 800 900 500 500 4500-9 +38 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 93,3 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 48,9 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 04,4 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 60,0 9,7 5,0 68,3 0,4 36,5 53,4 55,8 46,5 767,4 35,6 9,0 50,0 66,5 99,6 33, 49,6 49,3 45,4 748, 343,3 8,6 49,0 65, 97,9 30,7 46,9 44,8 407,8 734,0 37, 8,3 47,9 64, 96, 8, 44, 39,9 400,3 70, 398,9 8,3 47,6 63,4 95, 7, 43, 38, 397, 74,7 46,7 8,3 47, 63, 94,5 5,8 4,7 36,5 394,0 709, 454,4 7,9 46,5 6, 93, 4, 39,6 3,7 387,8 698, 48, 5,9 4,4 55, 8,7 0,3 4, 06,9 344,8 60,6 50,0,4 3,4 43,4 65, 86,9 97,6 6,7 7,0 487,5 537,8,0 9,0 38,6 57,9 77, 86,9 45, 4,7 435, 565,6,0 9,0 38,6 57,9 77, 86,9 45, 4,7 435, 593,3 0,7 7,9 37, 55,5 74, 83,4 38,9 3,7 46,8 6, 9,0 3,8 3,7 47, 63, 7,0 8, 97, 354,7 648,9 6, 6,5, 33, 44,5 50,0 83, 38,6 49,3 676,7 5, 3, 7,6 6, 35, 39,6 65,8 09,6 97,5 704,4 3,8 9,7 3, 9,3 5,8 9,0 48,6 80,7 45,5 85
PRESSURE-TEMPERTURE RTINS PSI - MTERILS: STM B46 N0800 BR - STNDRD LSS Temperature 50 300 400 600 800 900 500 500 4500-0 to 00 90 750,000,500,000,50 3,750 6,50,50 00 60 70 960,440,90,60 3,600 6,000 0,800 300 30 75 950,45,905,40 3,565 5,940 0,690 400 00 675 900,345,795,00 3,365 5,60 0,00 500 70 655 875,30,745,965 3,75 5,460 9,830 600 40 605 805,0,65,85 3,05 5,040 9,070 650 5 590 785,75 570,765,940 4,905 8,85 700 0 570 755,35,55,705,840 4,730 8,55 750 95 530 70,065,40,595,660 4,430 7,970 800 80 50 675,05,355,55,540 4,30 7,60 SPEIL LSS Temperature 50 300 400 600 800 900 500 500 4500-0 to 00 90 750,000,500,000,50 3,750 6,50,50 00 90 750,000,500,000,50 3,750 6,50,50 300 90 750,000,500,000,50 3,750 6,50,50 400 90 750,000,500,000,50 3,750 6,50,50 500 80 730 975,465,950,95 3,655 6,095 0,970 600 70 705 940,405,875,0 3,55 5,860 0,545 650 70 700 930,400,865,095 3,495 5,85 0,485 700 65 695 95,390,855,085 3,475 5,790 0,45 750 60 685 90,365,80,050 3,45 5,690 0,45 800 60 675 900,350,800,05 3,375 5,65 0,5 STNDRD LSS Temperature 50 300 400 600 800 900 500 500 4500-9 +38 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 93,3 7,9 49,6 66, 99,3 3,4 48,9 48, 43,7 744,7 48,9 5,8 49,3 65,5 98, 3,3 47,5 45,8 409,6 737, 04,4 3,8 46,5 6,0 9,7 3,8 39,3 3,0 386,8 696,3 60,0,7 45, 60,3 90,3 0,3 35,5 5,8 376,5 677,8 35,6 9,6 4,7 55,5 83,4.3 5, 08,6 347,5 65,4 343,3 8,6 40,7 54, 8,0 08,,7 0,7 338, 608,5 37, 7,6 39,3 5,0 78, 04,4 7,5 95,8 36, 587, 398,9 6,5 36,5 48,9 73,4 98,0 0,0 83,4 305,4 549,5 46,7 5,5 35, 46,5 70,0 93,4 05, 75, 9,6 54,7 SPEIL LSS Temperature 50 300 400 600 800 900 500 500 4500-9 +38 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 93,3 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 48,9 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 04,4 0,0 5,7 69,0 03,4 37,9 55, 58,6 430,9 775,7 60,0 9,3 50,3 67, 0,0 34,4 5,3 5,0 40, 756,4 35,6 8,6 48,6 64,8 96,9 9,3 45,5 4,3 404,0 77, 343,3 8,6 48,3 64, 96,5 8,6 44,4 4,0 40,6 7,9 37, 8,3 47,9 63,8 95,8 8,0 43,8 39,6 399, 78,8 398,9 7,9 47, 6,7 94, 5,5 4,3 35,5 39,3 706,4 46,7 7,9 46,5 6, 93, 4, 39,6 3,7 387,8 698, PSI - MTERILS: STM B564 N04400 BR - STNDRD LSS Temperature 50 300 400 600 800 900 500 500 4500-0 to 00 30 600 800,00,600,800 3,000 5,000 9,000 00 00 530 705,055,408,585,640 4,400 7,90 300 90 495 660 990,30,485,470 4,0 7,45 400 85 480 635 955,75,435,390 3,980 7,65 500 70 475 635 950,73,435,375 3,960 7,30 600 40 475 635 950,73,435,375 3,960 7,30 650 5 475 635 950,73,435,375 3,960 7,30 700 0 475 635 950,73,435,375 3,960 7,30 750 95 470 65 935,48,405,340 3,900 7,00 800 80 460 60 95,,375,90 3,80 6,875 850 65 340 455 680 907,00,695,830 5,090 900 50 45 330 495 658 740,35,055 3,705 SPEIL LSS Temperature 50 300 400 600 800 900 500 500 4500-0 to 00 55 670 895,340,790,00 3,350 5,580 0,045 00 5 590 785,80,575,770,945 4,90 8,840 300 0 550 735,00,465,650,755 4,590 8,60 400 05 535 70,065,40,600,665 4,440 7,995 500 05 530 70,060,45,590,650 4,40 7,955 600 05 530 70,060,45,590,650 4,40 7,955 650 05 530 70,060,45,590,650 4,40 7,955 700 05 530 70,060,45,590,650 4,40 7,955 750 00 50 695,045,390,565,60 4,355 7,835 800 95 50 680,05,365,535,560 4,65 7,675 850 70 440 590 885,80,35,0 3,685 6,630 900 5 30 430 645 860 965,605,680 4,80 STNDRD LSS Temperature 50 300 400 600 800 900 500 500 4500-9 +38 5,9 4,4 55, 8,7 0,3 4, 06,9 344,8 60,6 93,3 3,8 36,5 48,6 7,7 97, 09,3 8,0 303,4 546, 48,9 3, 34, 45,5 68,3 9,0 0,4 70,3 84, 5,3 04,4,8 33, 43,8 65,8 87,9 98,9 64,8 74,4 494,0 60,0,7 3,8 43,8 65,5 87,8 98,9 63,8 73,0 49,6 35,6 9,7 3,8 43,8 65,5 87,8 98,9 63,8 73,0 49,6 343,3 8,6 3,8 43,8 65,5 87,8 98,9 63,8 73,0 49,6 37, 7,6 3,8 43,8 65,5 87,8 98,9 63,8 73,0 49,6 398,9 6,6 3,4 43, 64,5 86,0 96,9 6,3 68,9 484,0 46,7 5,5 3,7 4, 63, 84, 94,8 57,9 63,4 474,0 454,4 4,5 3,4 3,4 46,9 6,5 70,3 6,9 95, 35,0 48, 3,4 6,9,8 34, 45,4 5,0 85, 4,7 55,5 SPEIL LSS Temperature 50 300 400 600 800 900 500 500 4500-9 +38 7,6 46, 6,7 9,4 3,4 38,6 3,0 384,7 69,6 93,3 5,5 40,7 54, 8,4 08,6,0 03, 338,5 609,5 48,9 4,5 37,9 50,7 75,8 0,0 3,8 90,0 36,5 569,5 04,4 4, 36,9 49,0 73,4 98,0 0,3 83,8 306, 55,3 60,0 4, 36,5 49,0 73, 97,6 09,6 8,7 304,8 548,5 35,6 4, 36,5 49,0 73, 97,6 09,6 8,7 304,8 548,5 343,3 4, 36,5 49,0 73, 97,6 09,6 8,7 304,8 548,5 37, 4, 36,5 49,0 73, 97,6 09,6 8,7 304,8 548,5 398,9 3,8 35,9 47,9 7, 95,8 07,9 80,0 300,3 540, 46,7 3,4 35, 46,9 70,7 94, 05,8 76,5 94, 59, 454,4,7 30,3 40,7 6,0 8,4 9,4 5,4 54, 457, 48, 8,6, 9,6 44,5 59,3 66,5 0,7 84,8 33,3 86
PRESSURE-TEMPERTURE RTINS PSI - MTERILS: 05 N (a) BR - LIMITED LSS Temperature 800# LTD 690#LTD 500#LTD 680#LTD 4500#LTD -0 to 00,000 4,5 6,50 6,700,50 00,000 4,5 6,50 6,700,50 300,000 4,5 6,50 6,700,50 400,000 4,5 6,50 6,700,50 500,000 4,5 6,50 6,700,50 600,900 4,05 5,940 6,370 0,690 650,865 3,940 5,85 6,45 0,485 700,850 3,90 5,780 6,95 0,405 750,680 3,550 5,50 5,630 9,450 800,375,895 4,85 4,595 7,75 850 895,880,785,985 5,05 900 575,05,785,95 3,5 950 350 745,0,95,060 000 80 390 600 650,95 LIMITED LSS Temperature 800# LTD 690#LTD 500#LTD 680#LTD 4500#LTD -9 to 38 37,9 9,3 43,0 46,0 775,7 93,3 37,9 9,3 43,0 46,0 775,7 48,9 37,9 9,3 43,0 46,0 775,7 04,4 37,9 9,3 43,0 46,0 775,7 60,0 37,9 9,3 43,0 46,0 775,7 35,6 3,0 76,8 409,6 439, 737, 343,3 8,6 7,7 408,5 430,6 7,9 37, 7,5 69,6 398,5 47, 77,4 398,9 5,8 44,8 36,0 388, 65,6 46,7 94,8 99,6 95,4 36,8 53,9 454,4 6,7 9,6 9,0 05,8 345,8 48, 83, 83, 3, 3,0,7 50,0 4, 5,4 76,5 8,4 4,0 537,8,4 6,9 4,4 44,8 8.4 PSI - MTERILS: 8 5 - STM 8 5a BR - LIMITED LSS Temperature 800#LTD 690#LTD 500#LTD 680#LTD 4500#LTD -0 to 00,000 4,5 6,50 6,700,50 00,000 4,5 6,50 6,700,50 300,940 4,05 6,070 6,505 0,930 400,90 4,055 6,000 6,430 0,800 500,90 4,055 6,000 6,430 0,800 600,885 3,985 5,895 6,30 0,605 650,860 3,935 5,80 6,40 0,480 700,85 3,865 5,75 6,5 0,85 750,760 3,70 5,500 5,895 9,900 800,700 3,600 5,30 5,705 9,580 850,65 3,405 5,035 5,400 9,065 900,35,60 3,855 4,35 6,945 950 95,960,95 3,85 5,500 000 685,50,30,505 4,60 050 495,095,65,85 3,345 00 345 755,5,55,30 50 0 470 695 780,430 00 0 60 385 430 800 LIMITED LSS Temperature 800#LTD 690#LTD 500#LTD 680#LTD 4500#LTD -9 to 38 37,9 9,3 43,0 46,0 775,7 93,3 37,9 9,3 43,0 46,0 775,7 48,9 33,8 83,0 48,5 448,5 753,6 04,4 3,4 79,6 43,7 443,3 744,7 60,0 3,4 79,6 43,7 443,3 744,7 35,6 30,0 74,8 406,5 435,8 73, 343,3 8, 7,3 40,3 430, 7,6 37, 5,8 66,5 394,0 4,3 709, 398,9,3 56,5 379, 406,5 68,6 46,7 7, 48, 366,8 393,3 660,5 454,4,3 34,8 347, 37,3 65,0 48, 85, 80,0 65,8 85, 479,0 50,0 63,8 35, 0,7 9,6 379, 537,8 47, 04, 53,7 7,7 38,5 565,6 34, 75,5,3 5, 30,6 593,3 3,8 5, 76,9 86,5 59,3 6, 4,5 3,4 47,9 53,8 98,6 648,9 8,3 7,9 6,6 9,6 55, PSI - MTERILS: 8 9 BR - LIMITED LSS Temperature 800#LTD 690#LTD 500#LTD 680#LTD 4500#LTD -0 to 00,000 4,5 6,50 6,700,50 00,000 4,5 6,50 6,700,50 300,000 4,5 6,50 6,700,50 400,000 4,5 6,50 6,700,50 500,000 4,5 6,50 6,700,50 600,000 4,5 6,50 6,700,50 650,000 4,5 6,50 6,700,50 700,955 4,30 6,0 6,550 0,995 750,945 4,05 6,070 6,505 0,930 800,90 4,05 6,000 6,430 0,800 850,805 3,85 5,645 6,050 0,60 900,600 3,380 5,000 5,360 9,000 950,75,70 4,05 4,380 7,555 000 875,95,850 3,05 5,890 050 595,300,95,60 3,985 00 390 860,70,430,65 50 60 570 845 950 755 00 80 390 575 650,95 LIMITED LSS Temperature 800#LTD 690#LTD 500#LTD 680#LTD 4500#LTD -9 to 38 37,9 9,3 43,0 46,0 775,7 93,3 37,9 9,3 43,0 46,0 775,7 48,9 37,9 9,3 43,0 46,0 775,7 04,4 37,9 9,3 43,0 46,0 775,7 60,0 37,9 9,3 43,0 46,0 775,7 35,6 37,9 9,3 43,0 46,0 775,7 343,3 37,9 9,3 43,0 46,0 775,7 37, 34,8 84,8 4,3 45,6 758, 398,9 34, 83,0 48,5 448,5 753,6 46,7 3,4 83,0 43,7 443,3 744,7 454,4 4,4 63,0 389, 47, 700,5 48, 0,3 33,0 344,7 369,6 60,5 50,0 87,9 87,5 77,5 30,0 5,0 537,8 60,3 3,7 96,5,0 406, 565,6 4,0 89,6 3,7 49,0 74,8 593,3 6,9 59,3 87,6 98,6 8,0 6, 7,9 39,3 58,3 65,5,0 648,9,4 6,9 44,8 8,4 87
PRESSURE-TEMPERTURE RTINS PSI - MTERILS: 8 9 BR - LIMITED LSS Temperature 800#LTD 690#LTD 500#LTD 680#LTD 4500#LTD -0 to 00,000 4,5 6,50 6,700,50 00,000 4,5 6,50 6,700,50 300,000 4,5 6,50 6,700,50 400,000 4,5 6,50 6,700,50 500,000 4,5 6,50 6,700,50 600,000 4,5 6,50 6,700,50 650,000 4,5 6,50 6,700,50 700,955 4,30 6,0 6,550 0,995 750,945 4,05 6,070 6,505 0,930 800,90 4,055 6,000 6,430 0,800 850,805 3,85 5,645 6,050 0,60 900,600 3,380 5,000 5,360 9,000 950,75,75 4,05 4,385 7,555 000,60,555 3,780 4,40 7,80 050,60,555 3,780 4,40 7,80 00,040,90 3,390 3,805 7,005 50 765,695,500,805 5,80 00 495,095,65,80 3,345 LIMITED LSS Temperature 800#LTD 690#LTD 500#LTD 680#LTD 4500#LTD -9 to 38 37,9 9,3 43,0 46,0 775,7 93,3 37,9 9,3 43,0 46,0 775,7 48,9 37,9 9,3 43,0 46,0 775,7 04,4 37,9 9,3 43,0 46,0 775,7 60,0 37,9 9,3 43,0 46,0 775,7 35,6 37,9 9,3 43,0 46,0 775,7 343,3 37,9 9,3 43,0 46,0 775,7 37, 34,8 84,8 4,3 45,6 758, 398,9 34, 83,0 48,6 448,5 753,6 46,7 3,4 79,6 43,7 443,3 744,7 454,4 4,4 63,0 389, 47, 700,5 48, 0,3 33,0 344,7 369,6 60,5 50,0 87,9 87,9 77,5 30,3 50,9 537,8 80,0 76, 60,7 9,3 539, 565,6 80,0 76, 60,7 9,3 539, 593,3 7,7 57,9 33,7 6,3 483,0 6, 5,7 6,9 7,4 93,4 357, 648,9 34, 75,5,3 5,5 30,6 PSI - MTERILS: 8 L (b) BR - LIMITED LSS Temperature 800#LTD 690#LTD 500#LTD 680#LTD 4500#LTD -0 to 00,000 4,5 6,50 6,700,50 00,000 4,5 6,50 6,700,50 300,000 4,5 6,50 6,700,50 400,000 4,5 6,50 6,700,50 500,000 4,5 6,50 6,700,50 600,000 4,5 6,50 6,700,50 650,000 4,5 6,50 6,700,50 700,955 4,30 6,0 6,550 0,995 750,945 4,0 6,070 6,505 0,930 800,90 4,055 6,000 6,430 0,800 850,805 3,85 5,645 6,050 0,60 900,565 3,30 4,895 5,45 8,805 950,070,305 3,445 3,700 6,390 000 745,640,50,75 5,00 050 495,095,680,80 3,345 00 330 730,0,0,30 50 0 470 70 780,430 00 30 85 440 480 875 LIMITED LSS Temperature 800#LTD 690#LTD 500#LTD 680#LTD 4500#LTD -9 to 38 37,9 9,3 43,0 46,0 775,7 93,3 37,9 9,3 43,0 46,0 775,7 48,9 37,9 9,3 43,0 46,0 775,7 04,4 37,9 9,3 43,0 46,0 775,7 60,0 37,9 9,3 43,0 46,0 775,7 35,6 37,9 9,3 43,0 46,0 775,7 343,3 37,9 9,3 43,0 46,0 775,7 37, 34,8 84,8 4,3 45,6 758, 398,9 34, 83,0 48,5 448,5 753,6 46,7 3,4 79,6 43,7 443,3 744,7 454,4 4,4 63,0 389, 47, 700,5 48, 07,9 8, 337,5 36,6 607, 50,0 73,8 59,0 37,5 55, 440,6 537,8 5,4 3, 73,7 87,9 346, 565,6 34, 75,5 5,8 5,5 30,6 593,3,7 50,3 77, 83,4 53,7 6, 4,5 3,4 49,6 53,8 98,6 648,9 9,0 9,6 30,3 33, 60,3 PSI - MTERILS: 8 L3 (b) BR - LIMITED LSS Temperature 800#LTD 690#LTD 500#LTD 680#LTD 4500#LTD -0 to 00,000 4,5 6,50 6,700,50 00,000 4,5 650 6,700,50 300,980 4,75 6,80 6,65,0 400,935 4,080 6,035 6,470 0,865 500,90 4,055 6,000 6,430 0,800 600,90 4,055 6,000 6,430 0,800 650,905 4,035 5,965 6,395 0,735 700,900 4,005 5,930 6,355 0,670 750,840 3,885 5,790 6,65 0,350 800,795 3,790 5,605 6,00 0,095 850,75 3,60 5,355 5,740 9,645 900,600 3,380 5,000 5,360 9,000 950,75,70 4,075 4,380 7,555 000 895,980 3,040 3,90 6,050 050 600,330,040,05 4,065 00 380 830,80,385,545 50 35 55 800 865,590 00 45 30 480 50 955 LIMITED LSS Temperature 800#LTD 690#LTD 500#LTD 680#LTD 4500#LTD -9 to 38 37,9 9,3 43,0 46, 775,7 93,9 37,9 9,3 43,0 46, 775,7 48,9 36,5 87,9 46, 456,8 766,7 04,4 33,4 8,3 46, 446, 749, 60,0 3,4 79,6 43,7 443,3 744,7 35,6 3,4 79,6 43,7 443,3 744,7 343,3 3,3 78, 4,3 44,0 740, 37, 3,0 76, 408,9 438, 735,7 398,9 6,9 67,9 399, 45, 73,6 46,7 3,8 6,3 386,5 44,4 696,0 454,4 8, 49,6 367,8 395,8 665,0 48, 0,3 33,0 344,7 369,6 60,5 50,0 87,9 87,5 8,0 30,0 5,0 537,8 6,7 36,5 09,6 6,8 47, 565,6 4,4 9,7 40,6 5,0 80,3 593,3 6, 57, 88, 95,5 75,5 6, 6, 36, 55, 59,6 09,6 648,9 0,0,4 33, 35,8 65,8 88
PRESSURE-TEMPERTURE RTINS PSI - MTERILS: 8 304 (c) - STM -8 304H BR - LIMITED LSS Temperature 800#LTD 690#LTD 500#LTD 680#LTD 4500#LTD -0 to 00,000 4,5 6,50 6,700,50 00,780 3,770 5,570 5,970 0,030 300,600 3,380 5,000 5,360 9,000 400,475 3,5 4,605 4,935 8,95 500,380,95 4,30 4,630 7,780 600,300,750 4,065 4,385 7,35 650,80,700 3,995 4,85 7,90 700,60,655 3,930 4,5 7,070 750,35,60 3,855 4,35 6,945 800,00,535 3,750 4,00 6,750 850,80,485 3,680 3,945 6,60 900,55,440 3,605 3,865 6,495 950,35,390 3535 3,790 6,365 000,085,95 3,395 3,640 6,05 050,05,75 3,5 3,445 5,785 00 870,855,745,985 5,50 50 690,50,30,505 4,60 00 535,70,730,945 3,585 50 390 855,70,430,65 300 95 850 965,085,990 350 0 470 695 780,430 400 65 365 540 605,5 450 0 60 385 430 780 500 95 05 305 345 640 LIMITED LSS Temperature 800#LTD 690#LTD 500#LTD 680#LTD 4500#LTD -9 to 38 37,9 9,3 430,9 46,0 775,7 93,3,7 60,0 384,0 4,6 69,6 48,9 0,3 33,0 344,7 369,6 60,5 04,4 0,7 4,8 37,5 340,3 57,9 60,0 95, 0,7 97,9 39, 536,4 35,6 89,6 89,6 80,3 30,3 504,4 343,3 88, 86, 75,4 95,4 495,7 37, 86,9 83, 7,0 90,6 487,5 398,9 85, 80,0 65,8 85, 478,8 46,7 8,7 74,8 58,6 77, 465,4 454,4 8,4 7,3 53,7 7,0 456,4 48, 79,6 68, 48,6 66,5 447,8 50,0 78, 64,8 43,7 6,3 438,9 537,8 74,8 58, 34, 5,0 40,9 565,6 70,7 50,0,7 37,5 399,0 593,3 60,0 7,9 89,3 05,8 355,0 6, 47,6 04, 53,7 7,7 38,5 648,9 36,9 80,7 9,3 34, 47, 676,7 6,9 59,0 87,6 98,6 8,0 704,4 0,3 58,6 66,5 74,8 37, 73, 4,5 3,4 47,9 53,8 98,6 760,0,4 5, 37, 4,7 76,9 787,8 8,3 7,9 6,5 9,6 53,8 85,6 6,5 4,,0 3,8 44, PSI - MTERILS: 8 36 (c) - STM 8 36H BR - LIMITED LSS Temperature 800#LTD 690#LTD 500#LTD 680#LTD 4500#LTD -0 to 00,000 4,5 6,50 6,700,50 00,840 3,885 5,750 6,65 0,350 300,665 3,55 5,00 5,575 9,360 400,50 3,0 4,750 5,090 8,550 500,40,990 4,430 4,750 7,970 600,340 840 4,95 4,500 7,555 650,35,775 4,05 4,400 7,395 700,95,75 4,035 4,35 7,65 750,65,680 3,965 4,50 7,35 800,60,655 3,930 4,5 7,070 850,45,65 3,885 4,65 6,990 900,35,60 3,855 4,35 6,945 950,0,580 3,85 4,090 6,870 000,0,370 3,505 3,760 6,30 050,0,370 3,505 3,760 6,30 00,030,00 3,60 3,545 6,5 50 85,795 3,655,985 5,495 00 640,400,080,340 4,300 50 50,5,655,865 3,45 300 400 885,30,470,705 350 330 730,075,0,30 400 60 570 845 950,755 450 00 440 660 740,355 500 40 35 465 50 955 LIMITED LSS Temperature 800#LTD 690#LTD 500#LTD 680#LTD 4500#LTD -9 to 38 37,9 9,3 430,9 46,0 775,7 93,3 6,9 67,9 396,5 45, 73,6 48,9 4,8 4,3 358,5 384,4 645,4 04,4 04,8,3 37,5 350,9 589,5 60,0 97,9 06, 305,4 37,5 549,5 35,6 9,4 95,8 89,3 30,3 50,9 343,3 90,7 9,3 83,0 303,4 509,9 37, 89,3 87,9 73,4 98, 500,9 398,9 87, 84,8 73,4 93,0 49,9 46,7 86,9 83, 7,0 90,6 487,5 454,4 85,8 8,0 67,9 87, 48,0 48, 85, 80,0 65,9 85, 478,8 50,0 84, 79,9 63,0 8,0 473,7 537,8 77, 63,4 4,7 59, 435, 565,6 77, 63,4 4,7 59, 435, 593,3 7,0 5,7 4,8 44,4 4,6 6, 56, 3,8 5,0 05,8 378,9 648,9 44, 96,5 43,4 64,8 96,5 676,7 35, 76,9 4, 8,6 36, 704,4 7,6 6,0 90,3 0,3 86,5 73,,7 50,3 74, 83,4 53,7 760,0 7,9 39,3 58,3 66,5,0 787,8 3,8 30,3 45,5 5,0 93,4 85,6 9,6,7 3, 35,8 65,8 89
PRESSURE-TEMPERTURE RTINS PSI - MTERILS: 8 304L (d) - STM 8 36L BR - LIMITED LSS Temperature 800#LTD 690#LTD 500#LTD 680#LTD 4500#LTD -0 to 00,785 3,770 5,570 5,970 0,030 00,505 3,85 4,70 5,050 8,480 300,350,850 4,5 4,50 7,585 400,30,595 3,840 4,5 6,90 500,35,400 3,550 3,805 6,390 600,070,65 3,350 3,590 6,05 650,040,95 3,50 3,485 5,850 700,00,50 3,80 3,40 5,70 750 995,00 3,0 3,335 5,595 800 980,070 3,060 3,80 5,505 850 955,00,990 3,05 5,385 LIMITED LSS Temperature 800#LTD 690#LTD 500#LTD 680#LTD 4500#LTD -9 to 38 3, 59,9 384,0 4,6 69,6 93,3 03,8 9,6 34,7 348, 584,7 48,9 93, 96,5 90,6 3,6 53,0 04,4 84,8 78,9 64,8 83,7 476,4 60,0 78, 65,5 44,8 6,3 440,6 35,6 73,8 56, 3,0 47,5 45,4 343,3 7,7 5,3 4, 40,3 403,3 37, 70,3 48, 9,3 35, 394,4 398,9 68,6 44,8 4,4 9,9 385,6 46,7 67,6 4,7,0 6, 379,6 454,4 65,8 39,3 06,,0 37,3 PSI - MTERILS: 8 3 (f) - STM 8 3H (g) BR - LIMITED LSS Temperature 800#LTD 690#LTD 500#LTD 680#LTD 4500#LTD -0 to 00,000 4,5 6,50 6,700,50 00,80 3,835 5,680 6,090 0,0 300,60 3,430 5,070 5,435 9,30 400,475 3,55 4,605 4,935 8,95 500,375,895 4,85 4,595 7,75 600,300,755 4,070 4,365 7,330 650,80,705 4,000 4,90 7,00 700,60,655 3,930 4,5 7,070 750,45,630 3,895 4,75 7,005 800,35,60 3,855 4,35 6,945 850,0,585 3,80 4,095 6,880 900,5,560 3,785 4,060 6,85 950,5,560 3,785 4,060 6,85 000,0,370 3,505 3,755 6,30 050,085,95 3,395 3,640 6,05 00 955,040 3,00 3,85 5,670 50 85,795,655,985 5,495 00 640,405,080,335 4,300 50 85,070,580,775 3,65 300 380 830,35,385,545 350 95 650 965,085,990 400 5 495 735 85,0 450 80 390 575 650,95 500 30 85 45 480 875 Notes: a - Permissible, but not recommended for prolonged use above 800 (47 ) b - Permissible, but not recommended for prolonged use above 00 (593 ) c - t temperatures over 000 (540 ), use only when the carbon content is 0.04% or higher d - Not to be used over 800 (47 ) e - Not to be used over 600 (36 ) f - Not to be used over 000 (540 ) g - t temperatures over 000 (540 ), use only if the material is heat treated by heating to a minimum temperature of 000 (093 ) LIMITED LSS Temperature 800#LTD 690#LTD 500#LTD 680#LTD 4500#LTD -9 to 38 37,9 9,4 43,0 46, 775,9 93,3 5,5 64,5 39,7 40,0 704,8 48,9,7 36,6 349,7 374,8 69,7 04,4 0,7 7.6 37,6 340,3 57, 60,0 94,8 99,7 95,5 36,9 53. 35,6 89,7 90,0 80,7 30,0 505.5 343,3 88,3 86,6 75,9 95,9 496,6 37, 86,9 83, 7,0 90,7 487,6 398,9 85,9 8,4 68,6 87,9 483, 46,7 85, 80,0 65,9 85, 479,0 454,4 84, 78,3 63,4 8,4 474,5 48, 83,8 76,6 6,0 80,8 470,0 50,0 83,8 76,6 6,0 80,0 470,0 537,8 77, 63,4 4,7 59,0 435, 565,6 74,8 58,3 34, 5.0 4,0 593,3 65,9 40,7 08,3 6,6 39,0 6, 56, 3,8 83, 05,9 379,0 648,9 44, 96,9 43,4 6,0 96,6 676,7 33,4 73,8 09,0.4 5, 704,4 6, 57, 85, 95,5 75,5 73, 0,3 44,8 66,6 74,8 37, 760,0 5,5 3, 50,7 56,9 83,4 787,8,4 6,9 39,7 44,8 8,4 85,6 9,0 9,7 9,3 33, 60,3 h - Not to be used over 00 (649 ) - lloy N0665 in the annealed condition is subject to severe loss of impact strength at room temperature after exposure in the range of 000 to 400 (540 to 74 ) Ratings are in accordance with SME B6.34a - 998 langed end valves are rated as Standard lass only lass 4500 applies to weld end valves only rating temperature greater than 000 (540 ) does not apply to thread end valves Limited lass ratings apply to weld end and thread end valves only 90
STNDRD MTERILS SPEIITION TYPIL TE PRT NME MTERILS Handwheel nut RBON STEEL Handwheel RBON STEEL 3 Yoke sleeve ISI 46 4 Name plate LUMINUM 5 land nuts STM 94 H 6 land flange STM 05 7 Packing gland ISI 36 8 Bonnet STM 05 N 9 land studs STM 93 B6 0 B/B bolts STM 93 B7 Packing RPHITE Stem STM 479 40 3 B/B gasket 36L + RPHITE 4 Wedge STM 8 6a 5 Seat rings STM 479 40 H 6 Body STM 05 N TYPIL LOBE PRT NME MTERILS Handwheel nut RBON STEEL Handwheel RBON STEEL 3 Yoke sleeve ISI 46 4 Name plate LUMINUM 5 land nuts STM 94 - H 6 land flange STM 05 7 Packing gland ISI 36 8 Bonnet STM 05 N 9 land studs STM 93 B6 0 B/B bolts STM 93 B7 Packing RPHITE Stem STM 479 40 3 B/B gasket 36L + RPHITE 4 Disc STM 479 40 5 Seat rings INTERL H 6 Body STM 05 N 7 Washer RBON STEEL 8 onnection wire STM 479 36 9 Yoke nut RBON STEEL TYPIL HEK PRT NME MTERILS Rivet RBON STEEL 4 Name plate LUMINUM 5 Hinge ISI 40 7 Ball ISI 40 8 Bonnet STM 05 N 9 Disc nut STM 94-8 0 B/B bolts STM 93 B7 Hinge pin STM 479 36 Spring* STM 479 36 3 B/B gasket 36L + RPHITE 4 Disc STM 479 40 5 Seat rings INTERL H 6 Body STM 05 N 9 *Supplied Upon Request Only
REOMMENDED SPRE PRTS OR ORED VLVES BOLTED BONNET SKET SKET Type B mm in. mm in. 36.4 7.06 40.57 3. 3 48.89 39.54 4 54.3 44.73 5 6.44 5.05 6 66.60 54.3 7 74.9 60.36 8 85 3.35 73.87 9 95 3.74 78 3.07 0 87 3.43 76.99 70.76 60.36 STEM PKIN PKIN Type B H mm in. mm in. mm in. BH 5,7.6 9,5.37.87 BH3 7,.68,.44.87 BH4 7,.68,.44 6.0 BH5 9,.76,7.50 6.0 BH6/ 4,5.96 4,5.57 30.8 BH8 3,.7 9.75 36.4 BY5/ 6.0 6.63 30.8 BY7 8,. 9.75 30.8 B3 9,.76,7.5 35.38 B4/ 6.0 6.75 35.38 B5 8,. 9.63 40.57 B8 35,7.4,.87 5.05 5B8 38,5.5 5,4 5.05 4B8 40,5.59 8,5. 54.3 9B8/ 35,7.4,.87 4.65 9BE5 40,5.59 9.75 3.6 BOLTED BONNET RTJ SKET RIN JOINT RTJ P B mm in. mm in. mm in. R 34,.34 6,35.5,.44 R 39,6.56 7,94.3 4,3.56 R3 4,8.69 7,94.3 4,3.56 R4 44,4.75 7,94.3 4,3.56 R5 47,6.87 7,94.3 4,3.56 R6 50,8 7,94.3 4,3.56 R7 57,.5 7,94.3 4,3.56 R8 60,3.37 7,94.3 4,3.56 R9 65,0.56 7,94.3 4,3.56 R0 68,.69 7,94.3 4,3.56 R 7,.84,.44 7,4.69 R 8,5 3.5 7,94.3 4,3.56 R3 8,5 3.5,.44 7,4.69 R4 95, 3.75,.44 7,4.69 R5 0,6 4 7,94.3 4,3.56 R6 0,6 4,.44 7,4.69s 9
THRED STNDRD SME B.0. NOMINL PITH DI. T ROOT DI. T EETIVE PIPE O.D. T BEINNIN BEINNIN BEINNIN HNDTIHT THRED EXT. OVERLL LENTH O.D. O PIPE THREDS PER IN. PITH O THRED O THRED O EXT. THRED O EXT. THRED ENEMENT LENTH EXT. THRED D N P D E D L L L3 /8 inch.4.06.04.39.36.6.8.6.39 mm 0.9 7 0.940 9.98 9.33 6.484 4.57 6.703 9.967 /4 inch.54.7.06.5.48.43.0.40.59 mm 3.7 8.4 3.59.6 0.998 5.080 0.06 5.03 3/8 inch.67.7.06.66.6.57.4.4.60 mm 7.4 8.4 6.66 5.545 4.47 6.096 0.358 5.55 / inch.84.55.07.8.76.70.3.53.78 mm.34 4.84 0.76 9.63 7.805 8.8 3.556 9.850 3/4 inch.05.55.07.03.97.9.34.55.79 mm 6.67 4.84 6.035 4.580 3.39 8.6 3.86 0.55 inch.3.45.09.8..4.40.68.98 mm 33.40./.0 3.588 30.85 9.058 0.60 7.343 5.006 /4 inch.66.45.09.63.56.49.4.7.0 mm 4.6./.0 4.36 39.550 37.795 0.668 7.953 5.66 / inch.90.45.09.87.80.73.4.7.03 mm 48.6./.0 47.396 45.6 43.866 0.668 8.377 6.040 inch.37.45.09.34.7.0.44.76.06 mm 60.3./.0 59.4 57.633 55.855.074 9.5 6.878 SOKET WELD STNDRD SME B6. D P min. inch /4 3/8 / 3/4 /4 / mm 6 0 5 0 5 3 40 50 inch.555.690.855.065.330.675.95.406 mm 4,0 7,53,7 7,05 33,78 4,54 48,64 6, inch.38.38.38.50.50.50.50.6 mm 9,6 9,6 9,6,7,7,7,7 5,8 VLVOLET RUN PIPE ONSOLIDTION The Lip extension end shown on Page 6 -Extended Body Valve represents an economical solution to stocking various different items. In fact, the lip is inserted into the corresponding hole in the run pipe, and therefore a valve can be welded on different run sizes, independently. Where a certain number of valves is required and their location is known, we suggest the use of the Weld-o-let end type for which all the well known advantages of the Weld-o-let fitting are utilized. LSS 800 inch / 3/4 / mm 5 0 5 40 50 Run pipe consolidation /4 3/4 /4 / /4 / 4 3 36 / 3 / / 5 3 5 8 5-36 4 36 6 36 6 36 0 d - Weldolet bore inch.87.8.44.99.56 mm 30 36.5 50.5 65 - L and other valve dimensions are the same as Page 6 - Extended Body Valves LSS 500 inch / 3/4 / mm 5 0 5 40 50 Run pipe consolidation./4 / /4 / 4 3-3 / / 5 5 3 8 5-36 6 36 6 36 6 36 0 - d - Weldolet bore inch.8.44.99.56 - mm 30 36.5 50.5 65-93
VLVE LOW OEIIENT V factor is the most common data used to determine valve flow characteristics. V indicates the number of U.S. allons per minute of water at 70 which flows through the valve at a pressure drop of one p.s.i.. This data allows computing of pressure drop starting from a known flow rate and is applicable to both fluid and gaseous media. ormulas hereinafter represent a single example. or gaseous fluids, the engineer should use proper formula factors for the fluid type (vapor, satured or superheated steam, etc.), differential pressure, temperature, flow velocity, etc., must also be considered. LOW RTE water: Q = v P fluids other than water: Q = v P 6.4 S PRESSURE DROP P = ( Q ) v P = S ( Q ) 6.4 v WHERE Q = flow rate, gallon/minute P = pressure drop, p.s.i. S = weight density of fluid handled, pound/cu.ft. 6.4 = weight density of water, pound/cu.ft. See page 95 for valve flow coefficient chart PROPER SIZIN O HEK VLVES It is the velocity of fluid that opens the disc in a check valve. The minimum velocity required to lift the disc to the full open and stable position can be determined by the following formula: υ = 50 β V WHERE υ = flow velocity in feet per second seat diameter β = pipe int. diameter V = specific volume of fluid in cu.ft. per pound 94
VLVE LOW OEIIENT LOW OEIIENT V OR ORED STEEL VLVES inch / 3/4 / VLVE TYPE mm 5 0 5 40 50 H -0 ULL PORT 3 43 98 97 HL -0 REDUED PORT 5.6 5.5 77 97 9H -0 ULL PORT 8.9 8 39 96 85 TE 9HL -0 REDUED PORT 5.3.5 77 97 5-0 ULL PORT 9 39 40 85 5W-0 ULL PORT 8. 8.5 5.7 56.6 8.5 L-0 REDUED PORT 6.3 0 5.6 67.5 97 L3-0 REDUED PORT 6.3 0 5.6 67.5 97 L6-0 REDUED PORT 6.3 0 5.6 67.5 97 H -30 ULL PORT 3.5 5. 9.3 35 HL -30 REDUED PORT.5 3.9 6.5 6.5 3.5 Y -30 ULL PORT 5.5 0 8 48 78 9H -30 ULL PORT 3. 4.5 9.5 8 7 9HL -30 REDUED PORT.4 3. 5.5 4.5 0 LOBE 9Y -30 ULL PORT 3.7 8.7.6 4 73.8 5-30 ULL PORT 4.5 6.5 39 5W-30 ULL PORT 3. 5.9 6.8 8. 7.6 5Y-30 ULL PORT 3.7 8.7.6 4 73.8 L-30 REDUED PORT.3 3.9 7. 7.5.4 L3-30 REDUED PORT.3 3.9 7. 7.5.4 L6-30 REDUED PORT.3 3.9 7. 7.5.4 H -40 ULL PORT 3 4.9 9.8 6 8 HL -40 REDUED PORT..8 5.5 7.5 Y -40 ULL PORT 4.8 8. 3 39 73 9H -40 ULL PORT.7 4. 8.5 9.7 9HL -40 REDUED PORT..4 4.3 7 4.8 9Y -40 ULL PORT 3.4 7.9.5 39.6 66.8 5-40 ULL PORT 4.5 6.5 39 5W-40 ULL PORT.8 5. 5.8 4 5Y-40 ULL PORT 3.4 7.4.5 39.6 66.8 L-40 REDUED PORT.8 5.5 3. 6 HEK L3-40 REDUED PORT.8 5.5 3. 6 L6-40 REDUED PORT.8 5.5 3. 6 H-50 ULL PORT.7 4.5 7. 4 4 HL-50 REDUED PORT..6 4. 4.5 9H-50 ULL PORT.5 3.9 6.9 8.5 9.6 9HL-50 REDUED PORT. 3.6 6.3.3 5-50 ULL PORT 4.5 6.5 39 H-60 ULL PORT 6.7 3 4 63 5 HL-60 REDUED PORT.7 7.5.5 34 58 9H-60 ULL PORT 5 0.3.8 6 08 9HL-60 REDUED PORT.5 7.5 0.5 33 57 5-60 ULL PORT 6 5 30 00 30 95