INDUSTRIAL GEARBOX OILS PARTHAN EP These are premium quality oils manufactured from high quality base stocks fortified with extreme pressure additives, antifoam, antirust and antioxidation agents, thereby they have excellent oxidation resistance and thermal stability. PARTHAN EP grades contain phosphorous and sulfur as extreme pressure agents. These are non-corrosive to copper and copper alloys. Specifications: PARTHAN EP grades meet IS: 8406-1993, USS 224, AGMA standard 250.04, DIN 51 517 part 3, IPSS 1-09- 003-82 and CINCINNATI MILACRON P-63, P-77, P-57, P-35. PARTHAN EP grades are approved by ABB- ABL projects for their various equipments Application Area: These oils are recommended for all heavy duty enclosed gear drives with circulation or splash lubrication system operating under heavy or shock load conditions, plain and antifriction bearings subjected to shock and heavy loads. The grades give dependable performance for continuous service at operating temperature upto 110 C. These oils are also suitable for spray lubrication systems requiring extreme pressure properties. Page 1 of 20
Physico-Chemical Properties: PARTHAN EP 68 100 150 220 257 320 460 680 1000 1500 Viscosity, cst @ 40 C 62-72 95-110 135-160 210-240 250-270 300-340 440-475 625-700 950-1100 1450-1550 Viscosity Index 90 90 90 90 90 90 90 90 90 90 Flash Point COC, C, min. Pour Point, C, Max Timken OK load, kg, FZG, Rig Test, Passes 210 220 220 220 220 220 230 220 220 220 (-)6 (-)6 (-)6 (-)6 (-)6 (-)6 (-)3 (-)3 0 0 60 60 60 60 60 60 60 60 60 60 12 12 12 12 12 12 12 12 12 12 Page 2 of 20
HP ENERGY EFFICIENT GEAR OILS - PARTHAN EE RANGE Superior quality extreme pressure type industrial lubricating oils for gears & bearings operated under very heavy & shock load conditions, particularly in the temperature range upto 107 C. HPCL PARTHAN EE Series are energy efficient variation of the regular PARTHAN EP series to assist in reducing the energy consumption & also wear thereby resulting in considerable savings for an industrial application. Specifications: Meets IS 8406 : 1993, USS 22, AGMA 250.04, DIN 51517 Part 3 and IPSS I-09-003-97 Physico-Chemical Properties: 220 EE 320 EE 460 EE 680 EE Appearance Dark Dark Dark Dark Density @ 29.5 C, g/cc 0.896 0.899 0.901 0.903 Flash Point, COC, C 220 220 230 230 Corrosion Cu STRIP @100 C, 3 hrs 1 1 1 1 Pour Point, C -9-9 -6-3 Emulsion @ 82 C, 30 Min 60 Min 40-40-0 40-40-0 40-40-0 40-40-0 Page 3 of 20
Foam Test Seq I Seq II Seq III 100/0 50/0 100/0 100/0 50/0 100/0 100/0 50/0 100/0 100/0 50/0 100/0 Rust Test A / B Pass Pass Pass Pass Viscosity @ 40 C, cst 210-230 300-340 440-475 625-700 Viscosity Index 90 90 90 90 Four Ball Weld Load, kg 315 315 315 315 FZG, A/8.3/90, Pass 12 12 12 12 Demulsification Water In Oil % Free Water, ml Emulsion 1.0 80 1.0 1.0 80 1.0 1.0 80 1.0 1.0 80 1.0 Page 4 of 20
PARTHAN ML SERIES Certain Industrial Gear Units in are exposed to high-load/low-speed conditions which can lead to the breakdown of the lubricating film that is normally required for a long bearing life. This problem was identified by the R&D of Hindustan Petroleum Corporation Limited and premium mineral grade oil PARTHAN ML series has been developed to counter the micro-pitting problems. PARTHAN ML has been specially formulated with new generation extreme pressure additive which is chlorine free and offers long term protection against rust and corrosion while simultaneously keeping gear parts clean and also ensuring good filterability. Premium antioxidants provide long service life in applications. The formulated product offers long term seal and component compatibility. Specifications: PARTHAN ML meets the FAG FE-8 Test which is now a part of DIN 51517 Part III Specification. PARTHAN ML is compatible with most sealants and bearing materials used in industrial applications and recommended for use in heavily loaded step-up spur/helical/herringbone/bevel/planetary gearboxes in industrial environment. Product meets DIN 51517 Part III. PARTHAN ML Grades are available in ISO VG 150 to ISO VG 1000. PARTHAN ML Series is available in barrel sizes of 210 Litres. PARTHAN ML Series is approved by Flender for use in their geared units as per their latest bulletin T 7300. Page 5 of 20
Physico-Chemical Properties: PARTHAN 150 220 320 ISO VG Grade 150 220 320 AGMA Grade 4 EP 5 EP 6 EP Density @ 15 C, g/cc 0.8732 0.8756 0.8779 Colour, ASTM D1500/ISO 2049 <0.5 <0.5 <0.5 Flash Point, COC, C 233 221 225 Pour Point, C -36-30 -30 Kinematic Viscosity, cst, 40 C 149.6 226.5 330.5 Kinematic Viscosity, cst, 100 C 16.1 22.6 30.1 Viscosity Index 113 120 123 Temperature at which Kinematic Viscosity = 25 mm²/s Temperature at which Kinematic Viscosity = 2000 mm²/s Temperature at which Kinematic Viscosity = 5000 mm²/s 84 96 106 3 8 14-7 -2 3 Cu Strip Corrosion, 3 hrs. 100 C 1B 1B 1B FZG Gear test, PLS >12 >12 >12 Rust Test A&B Pass Pass Pass Page 6 of 20
Physico-Chemical Properties: PARTHAN 460 680 1000 ISO VG Grade 460 680 1000 AGMA Grade 7 EP 8 EP 9 EP Density @ 15 C, g/cc 0.8796 0.8821 0.8847 Colour, ASTM D1500/ISO 2049 <0.5 <0.5 <0.5 Flash Point, COC, C 224 232 220 Pour Point, C -27-27 -30 Kinematic Viscosity, cst, 40 C 453.1 662.5 1021 Kinematic Viscosity, cst, 100 C 37.7 50 67.9 Viscosity Index 124 125 132 Temperature at which Kinematic Viscosity = 25 mm²/s Temperature at which Kinematic Viscosity = 2000 mm²/s Temperature at which Kinematic Viscosity = 5000 mm²/s 116 125 133 18 25 30 7 13 18 Cu Strip Corrosion, 3 hrs. 100 C 1B 1B 1B FZG Gear test, PLS >12 >12 >12 Rust Test A&B Pass Pass Pass Page 7 of 20
PARTHAN EP MA SERIES Certain Industrial Gear Units in are exposed to high-load/low-speed conditions which can lead to the breakdown of the lubricating film that is normally required for a long bearing life. This problem was identified by the R&D of Hindustan Petroleum Corporation Limited and premium mineral grade oil PARTHAN EP MA series has been developed to counter the micro-pitting problems. PARTHAN EP MA has been specially formulated with new generation extreme pressure additive which is chlorine free and offers long term protection against rust and corrosion while simultaneously keeping gear parts clean and also ensuring good filterability. Premium antioxidants provide long service life in applications. Specifications: PARTHAN EP MA meets the FAG FE-8 Test which is now a part of DIN 51517 Part III Specification. PARTHAN EP MA is compatible with most sealants and bearing materials used in industrial applications and recommended for use in heavily loaded step-up spur/helical/herringbone/bevel/planetary gearboxes in industrial environment. Product meets DIN 51517 Part III. PARTHAN EP MA Grades are available in ISO VG 150 to ISO VG 460. PARTHAN EP MA Series is available in barrel sizes of 210 Litres. PARTHAN EP MA in conjunction with HP Lube Solutions can lead to improved field service performance. Page 8 of 20
Physico-Chemical Properties: PARTHAN EP 150 MA EP 220 MA EP 320 MA EP 460 MA ISO VG Grade 150 220 320 460 AGMA Grade 4 EP 5 EP 6 EP 7 EP Density @ 15 C, g/cc 0.889 0.8900 0.8911 0.9004 Colour, ASTM D1500 2.5 3.5 4.0 4.5 Flash Point, COC, C 254 264 280 294 Pour Point, C -15-9 -9-6 Kinematic Viscosity, cst, 40 C 149.9 218.8 312.8 435.3 Kinematic Viscosity, cst, 100 C 14.63 18.92 24.0 30.87 Viscosity Index 96 97 97 101 Total Acid Number, mg KOH/g 0.68 0.68 0.71 0.69 Cu Strip Corrosion, 3 hrs, 100 C 1b 1 b 1b 1b Four Ball wear scar dia, mm. 0.27 0.27 0.26 0.26 Four Ball Weld load, kg 280 280 280 280 FZG Gear test, PLS >12 >12 >12 >12 Rust Test A&B Pass Pass Pass Pass Timken OK Load, lb 70 85 90 90 Page 9 of 20
PARTHAN SL SERIES - SYNTHETIC GEAR OIL PARTHAN SL is a new generation fully synthetic extreme pressure gear lubricant specifically developed for lubricating the heavily-loaded gearboxes and rolling element bearings of industrial gear boxes. PARTHAN SL shows superior performance in the FAG FE-8 Test. PARTHAN SL can be recommended for gear boxes where high temperature performance coupled with micro-pitting resistance is required. PARTHAN SL is compatible with most sealants and bearing materials used in industrial applications and recommended for use in heavily loaded step-up spur/helical/herringbone/bevel/planetary gearboxes. PARTHAN SL oils can replace mineral based gear oils leading to lower operating temperature and efficiency improvement. PARTHAN SL has been specially formulated with new generation extreme pressure additive which is chlorine free and offers long term protection against rust and corrosion while simultaneously keeping gear parts clean and also ensuring good filterability. Premium antioxidants supplemented by the synthetic base used provide extra long service life in applications. Specifications: Product exceeds the requirements of DIN 51517 Part III. PARTHAN SL Grades are available in ISO VG 150 to ISO VG 460. PARTHAN SL Series is available in barrel sizes of 210 Litres. PARTHAN SL in conjunction with HP Lube Solutions can lead to improved field service performance. Page 10 of 20
Physico-Chemical Properties: PARTHAN SL 150 SL 220 SL 320 SL 460 ISO Grade 150 220 320 460 AGMA Grade 4 EP 5 EP 6 EP 7 EP Density @ 15 C, g/cc 0.850 0.856 0.8603 0.8614 Colour, ASTM D 1500 0.5 0.5 0.5 0.5 Flash Point, COC, C 220 250 248 238 Pour Point, C -45-45 -42-39 Kinematic Viscosity, cst, 40 C 151 241.9 326.40 468.70 Kinematic Viscosity, cst, 100 C 21.70 31.34 36.04 47.58 Viscosity Index 170 173 157 160 Total Acid Number, mg KOH/g 0.46 0.46 0.60 0.62 Cu Strip Corrosion, 3 hrs, 100 C 1 a 1 a 1b 1a Four Ball wear scar dia, mm. 0.29 0.29 0.29 0.27 Four Ball Weld load, kg 200 200 200 200 FZG Gear test, PLS > 12 > 12 > 12 > 12 Rust Test A&B Pass Pass Pass Pass Page 11 of 20
PARTHAN EP SA SERIES - SYNTHETIC GEAR OIL PARTHAN EP SA is a new generation synthetic extreme pressure gear lubricant specifically developed for lubricating the heavily-loaded gearboxes and rolling element bearings of industrial gear boxes. PARTHAN EP SA shows superior performance in the FAG FE-8 Test. PARTHAN EP SA is compatible with most sealants and bearing materials used in industrial applications and recommended for use in heavily loaded step-up spur/ helical/herringbone/bevel/planetary gearboxes. PARTHAN EP SA oils can replace mineral based gear oils leading to lower operating temperature and efficiency improvement. PARTHAN EP SA has been specially formulated with new generation extreme pressure additive which is chlorine free and offers long term protection against rust and corrosion while simultaneously keeping gear parts clean and also ensuring good filterability. Premium antioxidants supplemented by the synthetic base used provide extra long service life in applications. Specifications: Product exceeds the requirements of DIN 51517 Part III. PARTHAN EP SA Grades are available in ISO VG 220 to ISO VG 460. PARTHAN EP SA Series is available in barrel sizes of 210 Litres. PARTHAN EP SA is approved for use in Flender Gear Units as per their latest bulletin T 7300. Page 12 of 20
Physico-Chemical Properties: PARTHAN EP SA 220 EP SA 320 EP SA 460 ISO Grade 220 320 460 AGMA Grade 5 EP 6 EP 7 EP Specific gravity @ 15.6 C 0.854 0.861 0.872 Density @ 15 C, g/cc 0.856 0.862 0.877 Colour, ASTM D 1500 0.5 0.5 0.5 Flash Point, COC, C 220 234 240 Pour Point, C -37-36 -36 Kinematic Viscosity, cst, 40 C 219 313 458 Kinematic Viscosity, cst, 100 C 26.4 36.3 47.3 Viscosity Index 154 167 162 Total Acid Number, mg KOH/g 0.64 0.61 0.67 Cu Strip Corrosion, 3 hrs, 100 C 1 b 1b 1b Four Ball wear scar dia, mm. 0.29 0.29 0.27 Four Ball Weld load, kg 250 250 250 FZG Gear test, PLS > 12 > 12 > 12 Rust Test A&B Pass Pass Pass Page 13 of 20
PARTHAN PG 100 Polyglycol based synthetic Compressor & Gear Lubricant having excellent EP Properties and lasts 7 to 8 times more as compared to mineral oil based gear lubricants. PARTHAN PG 100 readily separates water unlike other PAG products which are water soluble. Specifications: Passes DIN 51506 VDL, DIN 51517 Part III (CLP) requirements and is also Factory Mutual Approved product. Physico-Chemical Properties: PARTHAN PG 100 Density at 15 C, g/cc 1.01 Flash Point, COC, C 100 Pour Point, C -33 Viscosity grade 100 Viscosity Index 222 Rust Test, ASTM D 665A ------- Pass ------- FZG Rating, Fail Stages ------- 12 min ------- Vickers 35VQ25 vane pump test Vickers Vane Pump (ASTM D 2882) passes < 10 mg 4 ball WSD, mm, 1800 rpm, 75 C, 1 h 0.35 TOST life > 10,000 hrs RBOT minutes >1000 Page 14 of 20
PARTHAN PG 150 PARTHAN PG 150 is a high performance synthetic gas compressor lubricant based on a Polyalkylene glycol. It is designed for enclosed pattern gas compressors for hydrocarbon and chemical gases where the crankcase and bearings operate in a gas-filled atmosphere. Under these conditions the gas is readily soluble in mineral oil lubricants which, on dilution, suffer a significant drop in viscosity (please refer to attachment giving graph of viscosity/ Pressure) and lubricant performance. This problem can be overcome by using PARTHAN PG in which the gases are much less soluble. PARTHAN PG is particularly suitable for marine service on vessels carrying specialist liquefied gas cargoes. Advantages: PARTHAN PG 150 offers the following advantages over mineral oils and competitive synthetic fluids: Reduced gas solubility leading to improved wear protection, extended lubricant life, improved compressor efficiency and reduced foaming. Multigas service for a wide range of gases including vinyl chloride and butadiene. The lubricant does not promote the dimerisation of butadiene or generate solid deposits. PARTHAN PG 150 therefore obviates the need to change to mineral oil for butadiene compression, thus simplifying the lubricant inventory, avoiding mistakes and saving time and expense. Applications: PARTHAN PG 150 is used for the following gases: Liquefied petroleum gases such as propane and butane. Liquefied natural gases such as methane and ethane. Hydrocarbon chemical gases such as ethylene, propylene and butylene. Chemical gases such as ammonia, vinyl chloride and butadiene. Page 15 of 20
Ideally compression gas should be dry, but this product will tolerate up to 4 % water before becoming hazy at 80 C. Common seal and gasket materials are unaffected by PARTHAN PG Series. Nitrile Rubber (NBR), Fluoro-Silicone or Vinyl-Methyl Polysiloxane are recommended. Ordinary industrial paints soften in the presence of this product. Two-pack epoxy formulations are normally resistant. This product should not be mixed with mineral oil. PARTHAN PG 150 is a clear pale yellow viscous liquid with a mild odour. Typical properties are given below: Physico-Chemical Properties: PG150 Kinematic viscosity 185 mm 2 /s at 40 C 35 mm 2 /s at100 C Method ASTM D445 Viscosity Index >230 ASTM D2Z7O Relative density 1.050 at 20 C ASTM D1296 Flash point COC, C > 290 C ASTM D92 Pour point, C -40 C ASTM D97 Foam test (with air) Sequence I (24 C) Sequence II (93.5 C) Sequence III (24 C) 0/0 0/0 0/0 ASTM D892 Air Release value 12 min IP313 Copper corrosion 1a ASTM D130 Steam turbine corrosion test with disliiled water Oxidative stabliity <(95 C) V 100 change 4-balI Wear scar (40kg_1 hr, RT) Weld load Pass +O.6% 0.48 mm 180 kg ASTM D665A ASTM D2893 IP 139 Page 16 of 20
PARTHAN PG 220 Polyglycol based synthetic Gear Lubricant having excellent EP Properties and lasts 7 to 8 times more as compared to mineral oil based gear lubricants. PARTHAN PG 220 readily separates water unlike other PAG products which are water soluble. Passes DIN 51517 Part III (CLP) requirements and is also Factory Mutual Approved product. Physico-Chemical Properties: PARTHAN PG 220 Density at 15 C, g/cc 1.01 Flash Point, COC, C 220 Pour Point, C -30 Viscosity grade 220 Viscosity Index 222 Rust Test, ASTM D 665A ------- Pass ------- FZG Rating, Fail Stages ------- 12 min ------- Vickers 35VQ25 vane pump test Vickers Vane Pump (ASTM D 2882) passes < 10 mg 4 ball wsd, mm, 1800 rpm, 75 C, 1 Hr 0.35 TOST life > 2000 hrs RBOT minutes 420 Page 17 of 20
PARTHAN PG 320 PARTHAN PG grades are a range of Polyalkylene Glycol (PAG) based synthetic lubricants. PARTHAN PG 320 is made from special Water soluble polyalkylene glycol base stocks, known to provide outstanding micropitting and EP characteristics. With the addition of a high performance additive package these products are able to offer excellent thermal stability, high wear reduction rates, high micropitting resistance and load carrying ability as well as good corrosion protection. Applications: PARTHAN PG 320 has been specially formulated for use as industrial gear box lubricants and can be used in the most severe environments. As such they have achieved approval for use within a number of different gear designs, these include Helical Bevel Helical Planetary Worm Gears The product meets DIN 51517 Part 3; DAVID BROWN Type G Lubricant and FLENDER SIEMENS micropitting requirements. Physico-Chemical Properties: PARTHAN PG 320 Kinematic Viscosity, cst @ 40 C 310 Kinematic Viscosity, cst @ 100 C 55.8 Viscosity Index 252 Pour Point, C -39 Flash Point, COC, C 282 FZG, A/8, 3/90 >12 Page 18 of 20
PARTHAN PG 460 PARTHAN PG grades are a range of Polyalkylene Glycol based synthetic lubricants, which provide outstanding load carrying properties and excellent thermal stability. They have been purpose designed to provide excellent thermal stability. They have been purpose designed to provide excellent corrosion protection. (ASTM D 665 Procedure B pass) and demulsibility characteristics (according to ASTM D 1401). Applications: PARTHAN PG Grades allow thermally stable operation at temperatures in excess of 200 C. Typical applications include lubrication of calenders, piston compressors, bevel, spiral bevel, helical, spur and worm gear units. The lubricants are free of Chlorine, sulphur and metal based additives including lead. They remain homogeneous from below their pour point to temperatures in excess of 250 C. The anticipated service lifetime of all grades is substantially in excess of 10,000 hours at 100 C. In industrial enclosed gear units, the performance allows for extended drain intervals and, in some cases, for operation as a Fill for Life Lubricant. The product conforms to DAVID BROWN standard, exceeds DIN 51517 Part 3. Physico-Chemical Properties: PARTHAN PG 460 Kinematic Viscosity, cst @ 40 C 433 Kinematic Viscosity, cst @ 100 C 63.7 Viscosity Index 220 Pour Point, C -28 Flash Point, PMCC, C 225 Page 19 of 20
Neutralisation Number, mg KOH per gm oil 1.15 Oxidation Stability, Total Oxidation Products, % 0.500 Load Carrying Capacity, FZG Failure Load (A/8.3/90) >13 Timken OK Load, lbs 35 Weld Load, kg 170 Copper Strip Corrosion, 3hrs @ 100 C Rust Test Procedure A Procedure B Volume of Foam, ml Sequence I Sequence II Sequence III 1a Pass Pass 0/0 0/0 0/0 Air Release @ 90 C, min 25 Demulsibility @ 82 C Emulsion (ml) Free Water (ml) 0 40 Page 20 of 20