CATALOGUE 208 WELDING TORCHES
CONTENT WELDING HOSES Switch on, Press and Weld...3 MIG Welding Torches...4 Air-cooled MIG Welding Torches...4 Wear Parts for Air-cooled MIG Welding Torches...8 Water-cooled MIG Welding Torches... Wear Parts for Water-cooled MIG Welding Torches...4 Push Pull Welding Torches...6 Wear Parts for Push Pull Welding Torches...7 Migair Welding Torches with Fume Extraction...8 Contact Tips and Tip Adaptors...9 Spare Parts for ZA...22 Wire Liners...23 TIG Ergo Welding Torches...24 Wear Parts for TIG Ergo Welding Torches...29 TIG Adjust...32 Special Parts for TIG 20/22/40...33 Custom-built and Special Solutions...35 Wear Parts according to Individual Requirements...36 Plasma Cutting Torches...37 Plasma Welding Torches...39 Wear Parts for Plasma Welding Torches...40 Tungsten Electrodes...4 Wear Parts in Blister Packs...42 2
SWITCH ON, PRESS AND WELD MIGATRONIC Being one of the leading suppliers of professional welding solutions. Migatronic focuses on developing and supplying highquality welding torches for MIG/MAG. TIG. MMA and plasma welding. Migatronic welding torches are in ergonomically correct design; they fit both right and left hands. and welders avoid straining wrists and fingers. CONTACT If you have any questions. please do not hesitate to contact us. For terms of sale and delivery and warranty conditions. please refer to www.migatronic.com IN THIS CATALOGUE YOU WILL FIND INFORMATION ABOUT: Welding Torches Technical Data We reserve the right to make corrections in the event of a misprint. The products delivered may differ from the photos in the catalogue. 3
AIR-COOLED MIG WELDING TORCHES MIG-A Twist Turnable swan neck Ergonomically correct working posture whichever welding angle you use Can be turned up to 90 in both directions. step-by-step at intervals of 5 Available in 60 different configurations Accessories: gas nozzles. swan necks. gas diffusers and liners Three different modules can be mounted/remounted at the handle Suits all welding machine makes Art. no. Model 80974 ML40 Softgrip 360 3m 0.8 ZA 809750 ML50 TWIST 3m 0.8 80975 ML50 TWIST 4m 0.8 809753 ML 50 TWIST 5m 0.8 809756 ML50 TWIST 3m.0 ALU 809650 ML50 TWIST R 3m 0.8 80965 ML50 TWIST R 4m 0.8 809655 ML50 TWIST R 3m.0 ALU 80980 ML6 3m RallyMIG 6i 8098 ML6 Softgrip 360 3m 0.8 ZA 80982 ML6 Softgrip 360 3m XE 8097240 ML240 TWIST 3m 0.8 809724 ML240 TWIST 4m 0.8 8097243 ML240 TWIST 5m 0.8 8097242 ML240 TWIST 3m.0 ALU 8097244 ML240 TWIST 3m.0 ALU/Stainless 8096240 ML240 TWIST R 3m 0.8 8096243 ML240 TWIST R 3m.0 ALU 8096244 ML240 TWIST R 3m.2 ALU 809624 ML240 TWIST R 4m 0.8 8096245 ML240 TWIST R 4m.0 ALU 80990 ML24 Softgrip 360 3m.0 8099 ML24 Softgrip 360 4m.0 80992 ML24 Softgrip 360 4m.2 8097250 ML250 TWIST 3m 0.8 809725 ML250 TWIST 4m 0.8 8097253 ML250 TWIST 5m 0.8 8097254 ML250 TWIST 3m.0 8096250 ML250 TWIST R 3m 0.8 ABBREVIATIONS MIG: ML = Migatronic air-cooled torch 300 = Model size R = Remote control/dialog 8 m = Length AH = Advanced handle/manager ALU = Teflon liner ZA = Euro connection FKS = Double cooling chamber with extra cooling of gas nozzle KD = Separate tip adaptor (changeable tipholder) Art. no. Model 809625 ML250 TWIST R 4m 0.8 8096252 ML250 TWIST R 3m.0 ALU 8096257 ML250 TWIST R 4m.0 ALU 8097300 ML300 TWIST 3m.0 809730 ML300 TWIST 4m.0 8097303 ML300 TWIST 5m.0 8097304 ML300 TWIST 3m.0 ALU 8097302 ML300 TWIST 4m.2 8096300 ML300 TWIST R 3m.0 809630 ML300 TWIST R 4m.0 8097360 ML360 TWIST 3m.0 809736 ML360 TWIST 4m.0 8097363 ML360 TWIST 5m.0 8097364 ML360 TWIST 4m.2 8097374 ML360 TWIST 3m.6 8096360 ML360 TWIST R 3m.0 809636 ML360 TWIST R 4m.0 809738 ML380 HD TWIST 4m.2 8097400 ML400 TWIST 3m.2 809740 ML400 TWIST 4m.2 8097403 ML400 TWIST 5m.2 8097500 ML500 TWIST 3m.2 809750 ML500 TWIST 4m.2 8097503 ML500 TWIST 5m.2 8094242 Manager ML240 3M AHZA 25 0.8KD 8094243 Manager ML240 4M AHZA 25 0.8KD 8094244 Manager ML240 3M AHZA.0 ALU 8094362 Manager ML360 3M AHZA 50.0KD All models are supplied with Spring Pin. MODEL TWIST ML 40 ML 50/ 50 C/6 ML 240/24 ML 250 ML 300 ML 360 ML 380 ML 400 ML 500 Duty cycle CO 2 60% 20 A 80 A 250 A 230 A 295 A 380 A 380 A 400 A 500 A Duty cycle CO 2 0% 0 A 60 A 225 A 205 A 260 A 400 A 350 A 450 A Mixgas 60% 60 A 70 A 220 A 225 A 255 A 3 A 350 A 360 A 450 A Mixgas 0% 40 A 50 A 95 A 200 A 225 A 270 A 3 A 400 A Gas flow +/-5% 5 l/min. * 5 l/min. * 5 l/min. * 5 l/min. * 5 l/min. * 5 l/min. * 5 l/min. * 8 l/min. * 20 l/min. * Wire diameter, mm 0.6-.2 0.6-.2 0.6-.6 0.6-.6 0.6-.6 0.6-.6 0.6-.6 0.8-2.4 0.6-2.4 Cable, mm 2 6 6 25 25 35 50 50 55 55 Weight, kg 0.9 kg 0.9 kg.2 kg.3 kg.6 kg.8 kg.9 kg.9 kg 2.0 kg Total weight kg, 3 m.8 kg.8 kg 2. kg 2. kg 2.5 kg 2.9 kg 3.0 kg 3.5 kg 3.6 kg Connection ZA ZA ZA ZA ZA ZA ZA ZA ZA * = Minimum gas flow for compliance with maximum performance. 4
ML 6 & ML 24 Small handle. ease of operation and large flexibility Ball-and-socket joint between hose and handle Softgrip on the side of the handle The swan neck can be turned 360 without tools Ergonomically correct working posture whichever welding angle you use Supplied with a standard range of gas nozzles. swan necks. gas diffusers and liners A module for infinitely variable adjustment of current/ wire can be mounted/remounted at the handle ML6 Softgrip 80980 8098 80982 ML24 Softgrip 80990 8099 80992 The swan neck can be turned 360 without tools Art. no. 803000 Keypad unit Standard equipment Connection XE Maskin tilslutning ZA 988-998 Automig 80 XE Automig 200 XE Art. no. 80300273 Keypad unit with horizontal MIG control knob (RH). Requires electronic box MPS-4TF. Art. no. 766982 Connection ZA Maskin tilslutning ZA 998 - Automig 8 Automig 83 Automig 22 Automig 223 Automig 23 Automig 27 Automig 273 Automig 250 XE Art. no. Model No of pcs. 80977 ML50C/ XR 3m 80978 ML50C / XE 3m 80979 ML50C ZA 3m 0.8 Connection Maskin tilslutning X ZA 972-988 Automig 20 Automig 40 Automig 60 Automig 80 X Automig 85 X Automig 200 X Automig 250 X Connection Maskin tilslutning XE ZA 988-998 Automig 80 XE Automig 200 XE Connection Maskin tilslutning ZA ZA 998 - Automig 8 Automig 83 Automig 22 Automig 223 Automig 23 5
AIR-COOLED MIG WELDING TORCHES 2 Trigger and trigger stop Trigger with soft bottom stop and changeover between short and long travel. Trigger switch complete for MIG-A-Twist Art. no...800400 2. MIG-A Twist Trigger adjust PAL Art. no...4505048 All models are supplied with spring pin. Spring pin for ZA air Art. no...8008 Spring pin for ZA water Art. no...8008 Ball-and-socket joint ZA. water MIG Manager - digital communication with FLEX². Sigma² and Galaxy welding machines Ergonomically correct and user-friendly Adjustment and readout of parameters in display MODEL MANAGER ML 240 ML 360 Duty cycle CO 2 60% 250 A 380 A Duty cycle CO 2 0% 225 A 340 A Mixgas 60% 220 A 3 A Mixgas 0% 95 A 270 A Gas flow +/-5% 5 l/min. * 5 l/min. * Wire diameter. mm 0.6-.6 0.6-.6 Cabel. mm 2 25 50 Weight.2 kg.8 kg Total weight kg. 3 m 2. kg 4.0 kg Connection ZA ZA * = Minimum gasflow for compliance with maxsimum performance SUITABLE FOR MIG/MAG inverter machines WELDING TORCHES FLEX 2 3000 SIGMA 2 & SIGMA GALAXY 300 C / S SIGMA 2 & SIGMA GALAXY400 C / S SIGMA 2 & SIGMA GALAXY500 C / S 8094242 Manager ML240 3M AHZA 25 0.8KD KIT KIT 8094243 Manager ML240 4M AHZA 25 0.8KD KIT KIT 8094244 Manager ML240 3M AHZA.0 ALU KIT KIT 8094362 Manager ML360 3M AHZA 50.0KD KIT KIT (KIT) (KIT) KIT (KIT) Requires MIG Manager kit. Requires MIG/Manager kit. Not recommendable for maximum performance. 6
SUITABLE FOR MIG/MAG conventional stepregulated machines MIG/MAG inverter machines WELDING TORCHES Automig 83-223 Automig 273 MIG S 385x MIG S 445x RallyMig 6i/ Focus MIG 30 Automig² 83i Automig² 233i Automig² 273i Automig² 83i DUO Automig² 233i DUO Automig² 273i DUO Omega Yard 300/ Omega² 300 SIGMA SELECT 300 C / S SIGMA SELECT 400 C / S SIGMA SELECT 550 C / S WELDING TORCHES WITHOUT REGULATION 80974 ) ML40 Softgrip 360 3m 0.8 ZA (*) (*) 809750 ML50 TWIST 3 m 0.8 * * * (*) 80975 ML50 TWIST 4 m 0.8 * * * (*) 809753 ML50 TWIST 5 m 0.8 * * * (*) 809756 ML50 TWIST 3 m.0 ALU * * * (*) 80980 ) ML6 3 m RallyMIG 6i * 8098 ) ML6 Softgrip 360 3m 0.8 * * * (*) 8097240 ML240 TWIST 3 m 0.8 * * (*) * * * * * * 8097242 ML240 TWIST 3 m.0 ALU * * (*) * * * * * * 8097244 ML240 TWIST 3m.0 ALU/Stainless * * (*) * * * * * * 809724 ML240 TWIST 4 m 0.8 * * (*) * * * * * * 8097243 ML240 TWIST 5 m 0.8 * * (*) * * * * * * 80990 ) ML24 Softgrip 360 3 m.0 * * (*) * * * * (*) 8099 ) ML24 Softgrip 360 4 m.0 * * (*) * * * * (*) 80992 ) ML24 Softgrip 360 4 m.2 * * (*) * * * * (*) 8097250 ML250 TWIST 3 m 0.8 * * (*) * * * * * 809725 ML250 TWIST 4 m 0.8 * * (*) * * * * * 8097253 ML250 TWIST 5 m 0.8 * * (*) * * * * * 8097254 ML250 TWIST 3m.0 Steel * * (*) * * * * * 8097300 ML300 TWIST 3 m.0 * * (*) * * 8097304 ML300 TWIST 3 m.0 ALU * * (*) * 809730 ML300 TWIST 4 m.0 * * (*) * * 8097302 ML300 TWIST 4 m.2 * * (*) * * 8097303 ML300 TWIST 5 m.0 * * (*) * * 8097360 ML360 TWIST 3 m.0 * (*) * * * 8097374 ML360 TWIST 3 m.6 KD * (*) 809736 ML360 TWIST 4 m.0 * (*) * * * 8097364 ML360 TWIST 4 m.2 * (*) 8097363 ML360 TWIST 5 m.0 * (*) * * * 809738 ML380 HD TWIST 4m.2 * (*) * * * * 8097400 ML400 TWIST 3 m.2 * * * * * 809740 ML400 TWIST 4 m.2 * * * * * 8097403 ML400 TWIST 5 m.2 * * * * * 8097500 ML500 TWIST 3 m.2 * * * 809750 ML500 TWIST 4 m.2 * * * 8097503 ML500 TWIST 5 m.2 * * * WELDING TORCHES WITH REGULATION 809650 ML50 TWIST R 3 m 0.8 * * * (*) 809655 ML50 TWIST R 3 m.0 ALU * * * (*) 80965 ML50 TWIST R 4 m 0.8 * * * (*) 8096240 ML240 TWIST R 3 m 0.8 * * (*) * * * * * 8096243 ML240 TWIST R 3 m.0 ALU * * (*) * * * * * 8096244 ML240 TWIST R 3 m.02 ALU * * (*) * * * * * 809624 ML240 TWIST R 4 m 0.8 * * (*) * * * * * 8096245 ML240 TWIST R 4 m.0 ALU * * (*) * * * * * 8096250 ML250 TWIST R 3 m 0.8 * * (*) * * * * * 8096252 ML250 TWIST R 3 m.0 ALU * * (*) * * * * * 809625 ML250 TWIST R 4 m 0.8 * * (*) * * * * * 8096257 ML250 TWIST R 4 m.0 ALU * * (*) * * * * * 8096300 ML300 TWIST R 3 m.0 * * (*) * * 809630 ML300 TWIST R 4 m.0 * * (*) * * 8096360 ML360 TWIST R 3 m.0 * (*) * * * 809636 ML360 TWIST R 4 m.0 * (*) * * * * Recommended. (*) Not recommendable for maximum performance. ) Control unit is optionally available. 7
WEAR PARTS FOR AIR-COOLED MIG WELDING TORCHES Wear parts for ML 40 Position no. Art. no. Description No of pcs. 8308007 Gas nozzle ML40 threaded conic 2 803042 CONTACT TIP. PLEASE SEE PAGE 20 7 8020500 Insulating bush 3 80039 Contact nozzle for ML 40 left Wear parts for ML 50 TWIST / ML 6 / ML 50C Position no. Art. no. Description No of pcs. 4 * D 8052202 8050038 8050037 Swan neck ML50 MIG-A Twist Swan neck ML 6 w/fitting Swan neck ML 50C w/fitting 5 * D 8020500 Insulating bush 6 * * 80020 8002 Contact nozzle Contact nozzle ML 6. ML50C 7 * D 80002 Retaining clamp ML20/30/50 8 * D 8030202 CONTACT TIP. PLEASE SEE PAGE 20 50 9 * D 8040023 Gas Nozzle ML20/30/50 Conic 20 8040500 Gas Nozzle ML20/30/50 Cylindric 2 8040022 Gas Nozzle ML20/30/50 SPOT 22 800073 Protection cover 80252 80223 Wear parts for ML 250 TWIST Wearparts box ML50 Ergo/Twist 0.6 steel Wearparts box ML50 Ergo/Twist 0.8 steel * = ML50 pre-assembled as standard. = ML6 pre-assembled as standard. D = ML50C pre-assembled as standard Position no. Art. no. Description No of pcs. 4 8052302 Swan neck ML250 MIG-A Twist 5 800600 Retaining clamp ML250 6 8060 Tip adaptor ML250 M6 37mm * 80602 Tip adaptor ML250 M6 35mm 8 * 8030202 CONTACT TIP. PLEASE SEE PAGE 20 50 9 8040600 Gas Nozzle ML250 Cylindric 20 * 804060 Gas Nozzle ML250 Conic 80253 80224 80220 * = Pre-assembled as standard Wearparts box ML 250 0.6 steel Wearparts box ML 250 0.8-.0 steel Wearparts box ML250.0 alu 8
WEAR PARTS FOR AIR-COOLED MIG WELDING TORCHES Wear parts for ML 240 TWIST / Manager ML 240 / ML 24 Position no. Art. no. Description No of pcs. 4 8052402 805403 8050039 5 * 83077480 8307748 6 * 80604 8307749 80603 Swan neck ML240 MIG-A Twist Swan neck ML 240 Manager Swan neck ML 24 w/fitting Gas diffuser ML/MV24 Black Gas diffuser ML/MV24 White Tip adaptor ML-MV240 CuCrZr 5mm Tip adaptor ML-MV240 brass 5mm Tip adaptor ML-MV240 brass 7mm 7 803200 CONTACT TIP. PLEASE SEE PAGE 20 8 * 80406 Gas Nozzle ML/MV240 Conic 9 80406 Gas Nozzle ML/MV240 Cylindric 8024 8023 8022 * = Pre-assembled as standard Wearparts box ML240 0.6-0.8 steel Wearparts box ML240.0 steel Wearparts box ML/MV240.0 alu Wear parts for ML 300 TWIST/ML 360 TWIST/Manager ML 360 Position no. Art. no. Description No of pcs. 4a 8052502 Swan neck ML300 MIG-A Twist 4b 8052602 Swan neck ML360 MIG-A Twist 5 * 802030 8020306 6 802636 802637 * 802640 802638 802639 7 80026 80300 Gas diffuser ML300/360 White Gas diffuser ML360 32mm White Tip adaptor ML300/360 M8-6 25mm Brass Tip adaptor ML300/360 M8-6 32mm Brass Tip adaptor ML300/360 M8-6 25mm CuCrZr Tip adaptor ML300/360 M8-8 23mm Brass Tip adaptor ML300/360 M8-8 32mmBrass Tip adaptor ML300/360 M8-6 22mm Tip adaptor ML300/360 M8-8 23mm 8 * 80320 CONTACT TIP. PLEASE SEE PAGE 20 9 80240300 804070 20 * 80240303 8040700 80232 80254 * = Pre-assembled as standard Gas nozzle ML/MV Cylindric Gas nozzle ML360 Cylindric nickelled Gas nozzle ML/MV Conic Gas nozzle ML360 Conic nickelled Wearparts box ML 300.0 steel Wearparts box ML 300.0 steel CuCrZr 9
WEAR PARTS FOR AIR-COOLED MIG WELDING TORCHES Wear parts for ML 380 TWIST Position no. Art. no. Description No of pcs. 3 8052605 Swan neck ML380 MIG-A Twist 4 8043 Tip holder adaptor M-*20L for ML 380 HD 5 * 80220326 Insulating washer ML380 HD KD 6 * 80406 Tip adaptor MV450-550 CuCrZr 25 7 80409 Tip adaptor MV450-550 CuCrZr 29 8 * 80220309 Gas diffuser MV450/550 White 9 80220307 Gas diffuser MV450/550 CYLINDR 20 8023207 CONTACT TIP. PLEASE SEE PAGE 20 2 80240300 Gas nozzle ML/MV Cylindric 22 * 80240303 Gas nozzle ML/MV Conic 23 80240304 Gas nozzle ML/MV super Conic 24 804070 Gas nozzle ML360 Cylindric nickelled 25 8040700 Gas nozzle ML360 Conic nickelled * = Pre-assembled as standard Wear parts for ML 400 TWIST Position no. Art. no. Description No of pcs. 2 8052702 Swan neck ML400 MIG-A Twist 3a * 80203 Gas diffuser ML400 White 3b 80203 Gas diffuser ML400 Ceramic 3c * 802032 Gas diffuser ML400 Black 4a * 80040 Tip adaptor ML400 M8-8 43mm 4b 8004 Tip adaptor ML400 M8-8 47mm 5 80233 CONTACT TIP. PLEASE SEE PAGE 20 50 6 8040722 Gas Nozzle ML400 Cylindric 7 * 804072 Gas Nozzle ML400 Conic ø 8mm 8 8040720 Gas Nozzle ML400 Conic ø 4mm * = Pre-assembled as standard Wear parts for ML 500 TWIST Position no. Art. no. Description No of pcs. 2 8052802 Swan neck ML500 MIG-A Twist 3 * 802033 Gas diffuser ML500 White 4 80042 Tip adaptor ML500 M/M8 43mm. CuCrZr 5 * 80233 CONTACT TIP. PLEASE SEE PAGE 20 50 7 * 8040723 Gas Nozzle ML500 Conic ø 20mm * = Pre-assembled as standard
WATER-COOLED MIG WELDING TORCHES MIG-A Twist Turnable swan neck Ergonomically correct working posture whichever welding angle you use Can be turned up to 45 in both directions. step-by-step at intervals of 5 Available in 60 different configurations Accessories: gas nozzles. swan necks. gas diffusers and liners Three different modules can be mounted/remounted at the handle Suits all welding machine makes ABBREVIATIONS MIG: MV = Migatronic water-cooled torch 300 = Model size R = Remote control/dialog 8 m = Length AH = Advanced handle/manager ALU = Teflon liner ZA = Euro connection FKS = Double cooling chamber with extra cooling of gas nozzle KD = Separate tip adaptor MODEL TWIST MV 240 MV 400 FKS MV 450** MV 450 KD MV 500 FKS MV 550** MV 550 KD Duty cycle CO 2 60% 300 A 45 A 450 A 400 A 560 A 550 A 500 A Duty cycle CO 2 0% 300 A 45 A 450 A 400 A 560 A 550 A 500 A Mixgas 60% 270 A 350 A 400 A 350 A 520 A 500 A 450 A Mixgas 0% 270 A 350 A 400 A 350 A 520 A 500 A 450 A Min, flow rate water cooling bar l/min. l/min. l/min. l/min. l/min. l/min. l/min. Gas flow +/-5% 5 l/min. * 8 l/min. * 8 l/min. * 8 l/min. * 8 l/min. * 8 l/min. * 8 l/min. * Wire diameter, mm 0.6-.8 0.8-2.4 0.6-3.2 0.6-3.2 0.8-2.4 0.6-3.2 0.8-2.4 Cable, mm 2 6 6 6 6 6 6 6 Weight.5 kg.6 kg.6 kg.6 kg.7 kg.6 kg.6 kg Total weight kg, 3 m 3.0 kg 3. kg 3.0 kg 3.0 kg 3.2 kg 3.0 kg 3.0 kg Connection ZA ZA ZA ZA ZA ZA ZA * = Minimum gas flow for compliance with maximum performance. ** = Integrated tip adaptor MIG-A Twist welding torches are configurable with four different modules. A module is easily replaced as required. without tools. Turn the fitting Remove the cover Attach the module Lock the fitting Please note: all trademarks mentioned in this catalogue are property of the respective companies. Basic module 80040 Potentiometer module (800402) Sequence module. 3 steps (800403) Potentiometer module for Kemppi (8004)
WATER-COOLED MIG WELDING TORCHES Catalogue Art. no. Model 80297240 MV240 TWIST 3m.0 8029724 MV240 TWIST 4m.0 80297245 MV240 TWIST 5m.0 80296240 MV240 TWIST R 3m.0 8029624 MV240 TWIST R 4m.0 80296242 MV240 TWIST R 3m.0 ALU 80297602 MV400 FKS TWIST 3m.2 80297603 MV400 FKS TWIST 4m.2 80297605 MV400 FKS TWIST 5m.2 80296602 MV400 FKS TWIST R 3m.2 80296603 MV400 FKS TWIST R 4m.2 80297450 MV450 TWIST 3m.2 KD 8029745 MV450 TWIST 4m.2 KD 80297452 MV450 TWIST 3m.2 80297453 MV450 TWIST 4m.2 80297457 MV450 TWIST 3m.0 KD 80297454 MV450 TWIST 4m.0 KD 80297455 MV450 TWIST 5m.2 KD 80297456 MV450 TWIST 5m.2 80296464 MV450 TWIST R 3m.0 HD ALU 80296450 MV450 TWIST R 3m.2 KD 8029645 MV450 TWIST R 4m.2 KD 80296452 MV450 TWIST R 3m.2 80296453 MV450 TWIST R 4m.2 Art. no. Model 80297700 MV500 FKS TWIST 3m.2 8029770 MV500 FKS TWIST 4m.2 80297705 MV500 FKS TWIST 5m.2 80296700 MV500 FKS TWIST R 3m.2 8029670 MV500 FKS TWIST R 4m.2 80297550 MV550 TWIST 3m.2 KD 8029755 MV550 TWIST 4m.2 KD 80297552 MV550 TWIST 3m.2 80297553 MV550 TWIST 4m.2 80297555 MV550 TWIST 5m.2 KD 80297556 MV550 TWIST 5m.2 80296550 MV550 TWIST R 3m.2 KD 8029655 MV550 TWIST R 4m.2 KD 80296557 MV550 TWIST R 6m.2 KD 80296552 MV550 TWIST R 3m.2 80296553 MV550 TWIST R 4m.2 80294245 Manager MV240 3M AHZA 6.0KD 80294246 Manager MV240 4M AHZA 6.0KD 80294248 Manager MV240 4M AHZA 6 ALU 80294660 Manager FKS400 3M AH ZA 6.2 8029466 Manager FKS400 4M AH ZA 6.2 80294663 Manager FKS400 4M AH ZA.2ALU 80294702 Manager FKS500 3M AH ZA 6.2 80294703 Manager FKS500 4M AH ZA 6.2 All models are supplied with Spring Pin. Advanced Cooling System FKS welding torches feature double cooling chamber for efficient cooling at the gas nozzle; also available with Dialog adjustment of welding current or the digital MIG Manager. FKS is designed specifically for pulse welding and spray transfer welding. SUITABLE FOR MIG/MAG inverter machines WELDING torches FLEX 2 3000 SIGMA 2 & SIGMA GALAXY300 C / S SIGMA 2 & SIGMA GALAXY400 C / S Omega 400 C SIGMA 2 & SIGMA GALAXY500 C / S 80294245 Manager MV240 3M AHZA 6.0KD (KIT) KIT (KIT) 80294246 Manager MV240 4M AHZA 6.0KD (KIT) KIT (KIT) 80294248 Manager MV240 4M AHZA 6 ALU (KIT) KIT (KIT) 80294660 Manager FKS400 3M AH ZA 6.2 KIT KIT KIT (KIT) 8029466 Manager FKS400 4M AH ZA 6.2 KIT KIT KIT (KIT) 80294663 Manager FKS400 4M AH ZA.2ALU KIT KIT KIT (KIT) 80294702 Manager FKS500 3M AH ZA 6.2 KIT KIT KIT KIT 80294703 Manager FKS500 4M AH ZA 6.2 KIT KIT KIT KIT KIT (KIT) Requires MIG Manager kit Not recommendable for maximum performance - requires MIG/Manager kit. 2
WATER-COOLED MIG WELDING TORCHES SUITABLE FOR MIG/MAG conventional stepregulated machines MIG/MAG inverter machines WELDING TORCHES MIG S 385x MIG S 445x SIGMA SELECT 300 C / S SIGMA SELECT 400 C / S SIGMA SELECT 550 C / S WELDING TORCHES WITHOUT REGULATION 8029724 MV240 TWIST 4 m.0 * * (*) (*) 80297245 MV240 TWIST 5 m.0 * * (*) (*) 80297457 MV450 TWIST 3 m.0 KD * * * * * 80297450 MV450 TWIST 3 m.2 KD * * * * * 80297452 MV450 TWIST 3 m.2 * * * * * 80297454 MV450 TWIST 4 m.0 KD * * * * * 8029745 MV450 TWIST 4 m.2 KD * * * * * 80297453 MV450 TWIST 4 m.2 * * * * * 80297455 MV450 TWIST 5 m.2 KD * * * * * 80297456 MV450 TWIST 5 m.2 * * * * * 80297550 MV550 TWIST 3 m.2 KD * * * * * 80297552 MV550 TWIST 3 m.2 * * * * * 8029755 MV550 TWIST 4 m.2 KD * * * * * 80297553 MV550 TWIST 4 m.2 * * * * * 80297555 MV550 TWIST 5 m.2 KD * * * * * 80297556 MV550 TWIST 5 m.2 * * * * * 80297602 MV400 FKS TWIST 3 m.2 * * * * * 80297603 MV400 FKS TWIST 4 m.2 * * * * * 80297605 MV400 FKS TWIST 5 m.2 * * * * * 80297700 MV500 FKS TWIST 3 m.2 * * * * * 8029770 MV500 FKS TWIST 4 m.2 * * * * * 80297705 MV500 FKS TWIST 5 m.2 * * * * * WELDING TORCHES WITH REGULATION 80296240 MV240 TWIST R 3 m.0 * * (*) (*) 8029624 MV240 TWIST R 4 m.0 * * (*) (*) 80296242 MV240 TWIST R 3 m.0 ALU * * (*) (*) 80297240 MV240 TWIST R 5 m.0 * * (*) (*) 80296464 MV450 TWIST R 3 m.0 HD ALU * * * * * 80296450 MV450 TWIST R 3 m.2 KD * * * * * 80296452 MV450 TWIST R 3 m.2 * * * * * 8029645 MV450 TWIST R 4 m.2 KD * * * * * 80296453 MV450 TWIST R 4 m.2 * * * * * 80296550 MV550 TWIST R 3 m.2 KD * * * * * 80296552 MV550 TWIST R 3 m.2 * * * * * 8029655 MV550 TWIST R 4 m.2 KD * * * * * 80296553 MV550 TWIST R 4 m.2 * * * * * 80296557 MV550 TWIST R 6 m.2 KD * * * * * 80296602 MV400 FKS TWIST R 3 m.2 * * * * * 80296603 MV400 FKS TWIST R 4 m.2 * * * * * 80296700 MV500 FKS TWIST R 3 m.2 * * * * * 8029670 MV500 FKS TWIST R 4 m.2 * * * * * * Recommended. (*) Not recommendable for maximum performance 3
WEAR PARTS FOR WATER-COOLED MIG WELDING TORCHES Wear parts for MV 240 TWIST / Manager MV 240 Position no. Art. no. Description No of pcs. 2 80252 80257 Swan neck MV240 MIG-A Twist Swan neck MV 240 Manager 3a * 83077480 Gas diffuser ML/MV24 Black 3b 8307748 Gas diffuser ML/MV24 White 3c 802203 Gas diffuser ML/MV24 Ceramic 4 * 80604 8307749 80603 Tip adaptor ML-MV240 CuCrZr 5mm Tip adaptor ML-MV240 brass 5mm Tip adaptor ML-MV240 brass 7mm 5 * 80320 CONTACT TIP. PLEASE SEE PAGE 2 6 * 80406 Gas Nozzle ML/MV240 Conic 7 80406 Gas Nozzle ML/MV240 Cylindric * = Pre-assembled as standard 8022 Wearparts box ML/MV 240.0 alu Wear parts for FKS 400 TWIST / Manager FKS 400 3 Position no. Art. no. Description No of pcs. 2 80252500 802550 Swan neck MV400 FKS Twist Swan neck MV 400 FKS Manager 3 9255504 Shrink FLEX Ø24 /8mm.2m glue 4 800769 Insulator for cooling unit FKS400 5 800767 Water cooling unit FKS 400 6 800764 O-Ring FKS400W (2 pcs.) 7 8022020 Insulationg ring FKS400W 8 * 80408 Tip adaptor MV400FKS 24mm 9 * 8023202 CONTACT TIP. PLEASE SEE PAGE 2 20 80240308 Gas Nozzle MV400FKS Cylindric 62mm 2 * 80240307 Gas Nozzle MV400FKS Conic 62mm 22 8024038 Gas Nozzle MV400FKS Cylindric 67mm 23 8024037 Gas Nozzle MV400FKS Conic 67mm 24a 804 Tip adaptor for isolator 400FKS 24b 8022035 Gas difuser isolator 400FKS 80236 Wearparts box MV 400 FKS.0-.2 steel * = Pre-assembled as standard Note: 24a and 24b must be used together 4
WEAR PARTS FOR WATER-COOLED MIG WELDING TORCHES Wear parts for MV FKS 500 TWIST / Manager FKS 500 3 Position no. Art. no. Description No of pcs. 2 80252502 Swan neck MV500 FKS Twist 3 9255504 Shrink FLEX Ø24 /8MM.2m Glue 4 800772 Insulator for cooling unit FKS500 5 800770 Water cooling unit FKS 500 6 800766 O-Ring FKS500W (2 pcs.) 7 80220202 Insulationg ring FKS500W 8 * 804 Tip adaptor MV500FKS 38mm CuCrZr 9 * 8022032 8022033 Wear parts for MV 450 / 550 TWIST Position no. Art. no. Description No of pcs. 2 2 3 3 80252202 80252302 80252204 80252304 Swan neck MV450KD MIG-A Twist Swan neck MV550KD MIG-A Twist Swan neck MV450 MIG-A Twist Swan neck MV550 MIG-A Twist 4 80220303 Insulating Washer MV450/550 5. 8040 Tip adaptor MV450/550 M8 25mm Brass 5.2 * 80406 Tip adaptor MV450-550 CuCrZr 25 5.3 80403 Tip adaptor MV450/550 M6 25mm Brass 6. 80402 Tip adaptor MV450/550 M8 29mm Brass 6.2 80409 Tip adaptor MV450-550 CuCrZr 29mm 7 80200307 Threaded Ring 8. * 80220309 Gas diffuser MV450/550 White 8.2 80220306 Gas diffuser MV450/550 Black 8.3 802203 Gas diffuser MV450/550 Ceramic 9 80220307 Gas diffuser MV450/550 Cylindric 20 * 8023202 CONTACT TIP. PLEASE SEE PAGE 2 2 80240300 Gas Nozzle ML/MV Cylindric 22 * 80240303 Gas Nozzle ML/MV Conic 23 80240304 Gas Nozzle ML/MV Super Conic 24 804070 Gas Nozzle ML360 Cylindric nickelled 25 8040700 Gas Nozzle ML360 Conic nickelled * = Pre-assembled as standard Gas diffuser MV FKS/HD-S White Gas diffuser Ceramic HD-S+500FKS 20 * 8023202 CONTACT TIP. PLEASE SEE PAGE 2 2 80240300 Gas Nozzle ML/MV Cylindric 22 * 80240303 Gas Nozzle ML/MV Conic 23 80240304 Gas Nozzle ML/MV Super Conic 24 804070 Gas Nozzle ML360 Cylindric nickelled 25 8040700 Gas Nozzle ML360 Conic nickelled 80237 Wearparts box MV 500 FKS.0-.2 steel * = Pre-assembled as standard 8026 Wearparts box MV450/550.0-.2 steel 5
PUSH PULL WELDING TORCHES AIR-COOLED/WATER-COOLED Art. no. Push Pull Welding Torches - Air-cooled 80790302 MPL 300F Straight 8m II 80790303 MPL 300F Curved 8m II 80790305 MPL 300F Curved 8m II turnable Art. no. Push Pull Welding Torches - Water-cooled 80890402 MPV 400F Straight 8m II 80890403 MPV 400F Curved 8m II 80890404 MPV 400F Straight 8m II turnable 80890405 MPV 400F Curved 8m II turnable 80890406 MPV 400F FKS 8m Straight II 80890407 MPV 400F FKS Curved 8M turnable Art. no. Wire feed rolls 8070040 Wire feed roll 0.8 mm 80700403 Wire feed roll.0 mm 80700404 Wire feed roll.2 mm 80700406 Wire feed roll Alu U-grove.0 80700407 Wire feed roll for Alu U-grove.2 405305 Allen bolt for roll MODEL MPL 300 MPV 400 MPV 400 FKS Configurable Duty cycle CO 2 60% - 365 A 45 A Duty cycle CO 2 0% 275 A 365 A 45 A Mixgas 60% 325 A 350 A Mixgas 0% 250 A 325 A 350 A Cooling Air Water Water Water cooling bar l/min.* l/min.* Maxs. pressure (water) 5 bar 5 bar Maxs. water temperature 70 C 70 C Gas flow +/-5% 5 l/min.* 8 l/min.* 8 l/min.* Wire diameter, mm 0,8-,2 0,8-,6 0,8-,6 Cable, mm 2 60 25 25 Weight** 2 kg,7 kg,7 kg Total weight kg, 8 m 9,5 kg 8,2 kg 8,2 kg Connection ZA + 8 pol ZA + 8 pol ZA + 8 pol Lenght of swan neck*** Curved 8 cm Turnable 6,5cm Curved 23 cm Turnable 20 cm Curved 8 cm Turnable 7 cm Norm IEC 60974-7EC 60974- IEC 60974-7EC 60974- IEC 60974-7EC 60974- * Minimum gas flow for compliance with maximum performance ** Weight *** Length of swan neck The products delivered may differ from the photos in the catalogue. 6
WEAR PARTS FOR MPL 300 / MPV 400 / MPV 400 FKS 4 5 3 4 8 fixed 8 4 5 4a 5a a + 3a turnable 8 9 20 2 9 3 2 8 5 6 7 2 8 9 3 2 8 5 6 7 2a 7 6 7 6 Pos. no. Art. no. Description FIXED Pos. no. Art. no. Description turnable 8085040 Swan neck PP 450 straight fixed 2 80850402 Swan neck PP 450. curved fixed 3 80850405 Swan neck PP 400 FKS straight fixed 4 80850406 Swan neck PP 400 FKS curved fixed 5 80220303 INSULATING WASHER MV450/550 6 80200307 Threaded Ring 80220306 Gas diffuser MV450/550 Black a 80850403 Swan neck PP 550 KD straight turnable 2a 80850404 Swan neck PP 550 KD. curved fixed 3a 80850407 Swan neck PP 450 KD straight turnable 4a 808504 Swan neck PP 400 FKS straight turnable 5a 808504 Swan neck PP 400 FKS curved turnable 5 80220303 INSULATING WASHER MV450/550 6 80200307 Threaded Ring 7 80220309 Gas diffuser MV450/550 White 80220306 Gas diffuser MV450/550 Black 802203* Gas diffuser MV450/550 Ceramic 8 8023202* Contact tip. Please see page 20 7 80220309 Gas diffuser MV450/550 White 802203* Gas diffuser MV450/550 Ceramic 9 800764 O-Ring FKS400W (2 pcs.) 8022020 Insulationg ring FKS400W 80408* Tip adaptor MV400FKS 24mm 2 804 Tip adaptor for isolator 400FKS 3 8022035 Gas difuser isolator 400FKS 4 8060035 Bronze liner incl. Nipple 5 9255504 Shrink FLEX Ø24 /8MM.2m Glue 80240300 Gas Nozzle ML/MV Cylindric 8 8023202* Contact tip. Please see page 20 9 800764 O-Ring FKS400W (2 pcs.) 8022020 Insulationg ring FKS400W 80408 Tip adaptor MV400FKS 24mm 2 804 Tip adaptor for isolator 400FKS 3 8022035 Gas difuser isolator 400FKS 4 8060035 Bronze liner incl. Nipple 5 9255504 Shrink FLEX Ø24 /8MM.2m Glue 6 80240303* Gas Nozzle ML/MV Conic 80240300 Gas Nozzle ML/MV Cylindric 80240304 Gas Nozzle ML/MV Super Conic 6 80240303 Gas Nozzle ML/MV Conic 80240307 Gas Nozzle MV400FKS Conic 62mm 80240304 Gas Nozzle ML/MV Super Conic 7 80240308 Gas Nozzle MV400FKS Cylindric 62mm 8024037 Gas Nozzle MV400FKS Conic 67mm 8024038 Gas Nozzle MV400FKS Cylindric 67mm 7 80240307 Gas Nozzle MV400FKS Conic 62mm 80240308 Gas Nozzle MV400FKS Cylindric 62mm 8024037 Gas Nozzle MV400FKS Conic 67mm 8 4357003 O-ring ø6x Viton * = Pre-assembled as standard Note: 2 and 3 must be used together 8024038 Gas Nozzle MV400FKS Cylindric 67mm 8 808008 Connecting nut 9 4357008 O-ring ø5.5x.5 20 4357247 O-ring * = Pre-assembled as standard Note: 2 and 3 must be used together 7
PUSH PULL WELDING TORCHES AIR-COOLED/WATER-COOLED SUITABLE FOR Step-regulated MIG/MAG machines PUSH PULL TORCHES AIRCOOLED MIG 385x S MIG 445x S 80790302 MPL 300F Straight 8m II KIT KIT 80790303 MPL 300F Curved 8m II KIT KIT 80790305 MPL 300F Curved 8m II turnable KIT KIT PUSH PULL TORCHES WATERCOOLED 80890402 MPV400F 8m Straight II KIT KIT 80890403 MPV400F 8m Curved II KIT KIT 80890404 MPV400F 8m Straight II turnable KIT KIT 80890405 MPV400F 8m Curved II turnable KIT KIT 80890406 MPV 400F FKS 8m Straight II KIT KIT 80890407 MPV 400F FKS Curved 8m turnable KIT KIT KIT = Requires Push pull kit. Migair Welding Torches with Fume Extraction Art. no. ML 240 aircooled 80933 ML240 MIG AIR 4m 80933 ML240 MIG AIR 5m Art. no. MV 400 FKS watercooled 8029307 MV400 FKS MIG AIR 4m 8029308 MV400 FKS MIG AIR 5m MODEL ML 240 MigAir Duty cycle CO 2 60% 250 A 45 A Duty cycle CO 2 0% 225 A 45 A Mixgas 60% 220 A 350 A Mixgas 0% 95 A 350 A Cooling Air Water MV 400 FKS MigAir Min. flow rate watercooling bar - l/min. Maxs. pressure (water) - 5 bar Maxs. water temperature - 70 C Gas flow +/-5% -20 l/min. -20 l/min. Wire diameter, mm 0.8-.2 0.8-.6 Cab, mm 2 25 6 Weight.4 kg.7 kg Total weight kg, 8 m 4.8 kg 4.9 kg Connection ZA ZA Norm IEC 60974-7. IEC 60974- Art. no. Description 8060520 Steel liner 4.4m 0.6-0.8 white 8060550 Steel liner 5.4m 0.6-0.8 white 8060545 Steel liner 4.4m.2-.6 red 8060546 * Steel liner 5.4m.2-.6 red 80200345 Fume nozzle long 800793 Fume nozzle short * = Pre-assembled as standard Wear parts: Please refer to MV 240 and MV 400 FKS page 3 8
CONTACT TIPS AND TIP ADAPTORS Choice of Contact Tip With the exception of ML 50/250 types. a Migatronic ML/MV torch is equipped as standard with a CuCrZr (copper. chromium. zircorium) contact tip. in the most frequently used dimension as well as a gas nozzle. This is the most optimal choice of contact tip in terms of welding properties and/ or operating costs. Contact tips for ML/MV are available in different materials and lengths so as to ensure best possible welding result. For MIG pulse welding and welding in aluminium. we recommend longer contact tips combined with longer gas nozzles. for optimization of welding current transmission and gas shielding. A slim contact tip will have a lower temperature. as it will receive less radiant heat from the arc. That is why we recommend CuCrZr (copper. chromium. zircorium) contact tips which are considerably harder and less sensitive to high temperatures. An ordinary E-Cu (copper) type of contact tip will become soft and adhere to the welding wire if the temperature in the contact tip exceeds 300ºC. A CuCrZr contact tip will do that much later (see graph to the left). Please refer to the list of contact tips. Choice of Tip Adaptor - Material and Design Some types of torches can be equipped with various designs of tip adaptors. This allows the welder to optimise to another type of contact tip (thread/length). A tip adaptor made of CuCrZr will increase the performance of the torch. A standard tip adaptor is ML / MV 240 MS CuCrZr MS made of Ms (brass) which is characterized by strength and non-optimal thermal conductivity. CuCrZr is characterized by the strength and ductility of Ms and the thermal conductivity of E-Cu. That is why it is possible to achieve better performance by using a CuCrZr contact tip. MV 450/550 torches are supplied with integrated or separate tip adaptors. For maximum performance we recommend integrated tip adaptors but if thread for contact tip becomes defective. the swan neck must be replaced. The performance of a torch with separate tip adaptor is typically lower. but in return. the tip adaptor is replaceable. FKS types have separate tip adaptors with direct connection to the cooling water. That is why they are up to the performance standard of torches with integrated tip adaptors. MV 500 FKS is equipped as standard with separate CuCrZr tip adaptor. Please refer to the list of tip adaptors. MV 450 / MV 550 MV 450 FKS / MV 550 FKS MS CuCrZr MS CuCrZr CuCrZr CuCrZr CuCrZr CuCrZr 9
CONTACT TIPS Contact tip - design and length Art. no. Item description ML 40 ML 50 ML 250 ML 240 ML 300 ML 360 ML 400 ML 500 M 5 803040 ø 0.6 M5 ø 5 x8mm E-Cu 80304 ø 0.8 M5 ø 5 x8mm E-Cu 803042 ø.0 M5 ø 5 x 8mm E-Cu M 6 803000 ø 0.6 M6 ø 6 x 25 mm Cu nickel-plated ( ) ( ) ( ) ( ) ( ) 8030002 ø 0.8 M6 ø 6 x 25 mm Cu nickel-plated ( ) ( ) ( ) ( ) ( ) 8030003 ø.0 M6 ø 6 x 25 mm Cu nickel-plated ( ) ( ) ( ) ( ) ( ) 8030004 ø.2 M6 ø 6 x 25 mm Cu nickel-plated ( ) ( ) ( ) ( ) ( ) 8030 ø 0.6 M6 ø 6 x 25 mm Cu ( ) ( ) ( ) 80302 ø 0.8 M6 ø 6 x 25 mm Cu ( ) ( ) ( ) 80303 ø.0 M6 ø 6 x 25 mm Cu ( ) ( ) ( ) 80304 ø.2 M6 ø 6 x 25 mm Cu ( ) ( ) ( ) 803020 ø 0.6 M6 ø 8 x 28 mm Cu 8030202 ø 0.8 M6 ø 8 x 28 mm Cu 8030203 ø.0 M6 ø 8 x 28 mm Cu 8030204 ø.2 M6 ø 8 x 28 mm Cu 803200 ø 0.8 M6 ø 8 x 28 mm CuCrZr 80320 ø.0 M6 ø 8 x 28 mm CuCrZr 803202 ø.2 M6 ø 8 x 28 mm CuCrZr 803203 ø.4 M6 ø 8 x 28 mm CuCrZr 803204 ø.6 M6 ø 8 x 28 mm CuCrZr M 8 8023220 ø 0.8 M8 ø 8 x 30 mm CuCrZr heavy duty 802322 ø.0 M8 ø 8 x 30 mm CuCrZr heavy duty 8023222 ø.2 M8 ø 8 x 30 mm CuCrZr heavy duty 8023 ø 0.8 M8 ø x 30 mm E-Cu 80232 ø.0 M8 ø x 30 mm E-Cu 80233 ø.2 M8 ø x 30 mm E-Cu 80236 ø.4 M8 ø x 30 mm E-Cu 80234 ø.6 M8 ø x 30 mm E-Cu 8023200 ø 0.8 M8 ø 8 x 30 mm CuCrZr 802320 ø.0 M8 ø 8 x 30 mm CuCrZr 8023202 ø.2 M8 ø 8 x 30 mm CuCrZr 8023203 ø.6 M8 ø 8 x 30 mm CuCrZr 8023204 ø.4 M8 ø 8 x 30 mm CuCrZr 8023205 ø 0.8 M8 ø x 30 mm CuCrZr 8023206 ø.0 M8 ø x 30 mm CuCrZr 8023207 ø.2 M8 ø x 30 mm CuCrZr 8023208 ø.4 M8 ø x 30 mm CuCrZr 8023209 ø.6 M8 ø x 30 mm CuCrZr = Mild steel Fe. stainless steel CrNi and FCW. ( ) = Alternative. but we recommend. = Aluminium welding. = For gas nozzles with special length (depending on torch model). ( ) = Alternative. but we recommend. 20
CONTACT TIPS Contact tip - design and length Art. no. Item description MV 240 MV 450 MV 550 MV 400 FKS MV 500 FKS M 6 803000 ø 0.6 M6 ø 6 x 25 mm Cu nickel-plated ( ) 8030002 ø 0.8 M6 ø 6 x 25 mm Cu nickel-plated ( ) 8030003 ø.0 M6 ø 6 x 25 mm Cu nickel-plated ( ) 8030004 ø.2 M6 ø 6 x 25 mm Cu nickel-plated ( ) 803020 ø 0.6 M6 ø 8 x 28 mm Cu 8030202 ø 0.8 M6 ø 8 x 28 mm Cu 8030203 ø.0 M6 ø 8 x 28 mm Cu 8030204 ø.2 M6 ø 8 x 28 mm Cu 803200 ø 0.8 M6 ø 8 x 28 mm CuCrZr 80320 ø.0 M6 ø 8 x 28 mm CuCrZr 803202 ø.2 M6 ø 8 x 28 mm CuCrZr 803203 ø.4 M6 ø 8 x 28 mm CuCrZr 803204 ø.6 M6 ø 8 x 28 mm CuCrZr M 8 8023 ø 0.8 M8 ø x 30 mm E-Cu 80232 ø.0 M8 ø x 30 mm E-Cu 80233 ø.2 M8 ø x 30 mm E-Cu 80236 ø.4 M8 ø x 30 mm E-Cu 80234 ø.6 M8 ø x 30 mm E-Cu 8023 ø 0.8 M8 ø 8 x 35 mm CuCrZr 8023 ø.0 M8 ø 8 x 35 mm CuCrZr 80232 ø.2 M8 ø 8 x 35 mm CuCrZr 80233 ø.6 M8 ø 8 x 35 mm CuCrZr 80232 ø.0 M8 ø x 35 mm E-Cu ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) 802322 ø.2 M8 ø x 35 mm E-Cu ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) 8023200 ø 0.8 M8 ø 8 x 30 mm CuCrZr 802320 ø.0 M8 ø 8 x 30 mm CuCrZr 8023202 ø.2 M8 ø 8 x 30 mm CuCrZr 8023203 ø.6 M8 ø 8 x 30 mm CuCrZr 8023204 ø.4 M8 ø 8 x 30 mm CuCrZr 8023220 ø 0.8 M8 ø 8 x 30 mm CuCrZr heavy duty 802322 ø.0 M8 ø 8 x 30 mm CuCrZr heavy duty 8023222 ø.2 M8 ø 8 x 30 mm CuCrZr heavy duty 8023205 ø 0.8 M8 ø x 30 mm CuCrZr 8023206 ø.0 M8 ø x 30 mm CuCrZr 8023207 ø.2 M8 ø x 30 mm CuCrZr 8023208 ø.4 M8 ø x 30 mm CuCrZr 8023209 ø.6 M8 ø x 30 mm CuCrZr 8023300 ø 0.8 M8 ø x 38 mm CuCrZr 802330 ø.0 M8 ø x 38 mm CuCrZr 8023302 ø.2 M8 ø x 38 mm CuCrZr 8023303 ø.6 M8 ø x 38 mm CuCrZr = Mild steel Fe. stainless steel CrNi and FCW. ( ) = Alternative. but we recommend. = Aluminium welding. = For gas nozzles with special length (depending on torch model). ( ) = Alternative. but we recommend. 2
CONTACT TIPS Contact tip - design and length Art. no. Item description MV 400 FKS MV 500 FKS M 8 802340 ø.0 M8 ø x 4 mm CuCrZr 8023402 ø.2 M8 ø x 4 mm CuCrZr = Mild steel Fe. stainless steel CrNi and FCW. ( ) = Alternative. but we recommend. = Aluminium welding. = For gas nozzles with special length (depending on torch model). ( ) = Alternative. but we recommend. Spare Parts for ZA Art. no. Description 80200303 Swivel nut 26920008 Gas nipple Ms 800004 Gas nipple Ms 269008 Gas nipple CrNi 8007 O-ring 8020032 Spring pin without spring 2.5 mm ø 5 800773 Spring pin without spring 9.0 mm ø 6.5 800747 Spring pin with spring 24.0 mm ø 5.2 8008 Spring pin for ZA air 24mm ø 6.5 8008 Spring pin for ZA water 2mm ø 6.5 800706 ZA-ML Spring pin air 80200332 ZA-ML Spring pin water 8020030 Nut for ZA hose Swivel nut: Gas nipple: O-ring: 80200303 26920008 Ms x 8007 800004 Ms x 2 269008 CrNi x Spring pins: without spring 2.5 mm 8020032 ø5.0 without spring 9.0 mm 800773 ø6.5 with spring 24.0 mm 800747 ø5.2 Spring pin for ZA air 24.0 mm 8008 ø6.5 Spring pin for ZA Water 2.0 mm 8008 ø6.5 Socket Ø4 red. separate (2 pcs.) 8270004 22
WIRE LINERS Wire Liners Art. no. Description 8060520 Steel liner 4.4m 0.6-0.8 white 806052 Steel liner 4.4m 0.8-.0 blue 8060522 Steel liner 4.4m.2-.6 red 8060523 Steel liner 4.4m.6-2.4 yellow 8060550 Steel liner 5.4m 0.6-0.8 white 806055 Steel liner 5.4m 0.8-.0 blue 8060552 Steel liner 5.4m.2-.6 red 8060553 Steel liner 5.4m.6-2.4 yellow Wire Liners Art. no. Description 8060554 Steel/teflonliner (PTFE) Ø4 4.4m 0.8-.2 8060555 Steel/teflonliner (PTFE) Ø5 4.4m.0-.6 8060556 Steel/teflonliner (PTFE) Ø4 5.4m 0.8-.2 8060557 Steel/teflonliner (PTFE) Ø5 5.4m.0-.6 8060558 Steel/teflonliner (PTFE) Ø4 3.4m 0.8-.2 8060559 Steel/teflonliner (PTFE) Ø5 6.4m.0-.6 80607 Plastic liner (PEH) with bronze neck 806073 Plastic liner (PEH) with bronze neck 8060700 Carbon teflon liner (carbon PTFE) with bronze neck 8060707 Carbon teflon liner (carbon PTFE) with bronze neck Migatronic recommends Wire Wire diameter Steelliner / Steelteflonliner Plastic liner (PEH) with bronze neck Carbon teflon liner (carbon PTFE) with bronze neck Length of liner 3.4 m 4.4 m 5.4 m 6.4 m 4.4 m 4.4 m Fe Mild steel CrNi Stainless steel Cu Copper alloys Fe Flux Steel with flux cored wire CrNi Flux Stainless steel withflux cored wire Al Aluminium 0.6 mm 0.8 mm.0 mm.2 mm.4 mm.6 mm 2.0 mm 2.4 mm 0.8 mm.0 mm.2 mm.2 mm.4 mm.6 mm 0.6 mm 0.8 mm.0 mm.2 mm.4 mm.6 mm 2.0 mm 2.4 mm 0.8 mm.0 mm.2 mm.2 mm.4 mm.6 mm 0.8 mm.0 mm.2 mm.2 mm.4 mm.6 mm 8060520 806052 806052 8060522 8060522 8060522 8060523 8060523 8060558 8060558 8060558 8060520 806052 806052 8060522 8060522 8060522 8060523 8060523 8060558 8060558 8060558 8060558 8060558 8060558 8060520 806052 806052 8060522 8060522 8060522 8060523 8060523 8060554 8060554 8060554 8060555 8060555 8060555 8060520 806052 806052 8060522 8060522 8060522 8060523 8060523 8060554 8060554 8060554 8060555 8060555 8060555 8060554 8060554 8060554 8060555 8060555 8060555 8060550 806055 806055 8060552 8060552 8060552 8060553 8060553 8060556 8060556 8060556 8060557 8060557 8060557 8060550 806055 806055 8060552 8060552 8060552 8060553 8060553 8060556 8060556 8060556 8060557 8060557 8060557 8060556 8060556 8060556 8060557 8060557 8060557 8060559 8060559 8060559 8060559 8060559 8060559 8060559 8060559 8060559 80607 80607 806073 806073 Fields highlighted in grey apply to steel teflon liner only For liner diameter Ø4 choose wire diameter 0.8 -.2 mm. For liner diameter Ø5 chose wire diameter.2 -.6 mm 8060700 8060700 8060707 8060707 8060707 8060700 8060707 8060707 8060707 23
TIG ERGO WELDING TORCHES TIG Ergo for optimal TIG Welding TIG Ergo is designed with focus on ergonomics. user-friendliness. movability and reliability. The TIG Ergo range includes more than 50 different models from small air-cooled to heavy duty water-cooled models for welding with more than 400 amps. All TIG Ergo models are configurable with different control units as well as handle in two sizes with ball-and-socket joint and soft grip.. 2. 3. Blank cover for use with e.g. foot switch 80300 Keypad unit 803000 (old model) 80300060 (new model) Keypad unit with vertical TIG control knob (RH) 80300 (old model) 8030006 (new model) Keypad unit with horizontal TIG control knob (RH) 8030030 (old model) 80300070 (new model) Old model. use: 803000 80300 8030030 New model (202 ). use: 80300060 8030006 80300070 80300063 Up/Down module with 4-function key for adjustment of welding current incl. TIG-A Tack function. 80300063 Up/Down module with 3-function key for adjustment of welding current. 80300064 24
CABLE CONNECTOR FOR TIG ERGO WELDING TORCHES Cable connector for water-cooled TIG 32/40/45 welding torch Cable connector for water-cooled TIG 30 welding torch Cable connector for air-cooled TIG /20 welding torch Cable connector for air-cooled TIG 22 welding torch MODEL TIG ERGO TIG TIG 20 TIG 22 TIG 30 TIG 32 TIG 40 TIG 45 Duty cycle DC 60% 90 A A 30 A 230 A 325 A 400 A 460 A Duty cycle AC 60% 65 A 75 A 90 A 60 A 230 A 280 A 320 A Duty cycle DC 0% 80 A 90 A A 225 A 325 A 400 A 460 A Duty cycle AC 0% 55 A 65 A 80 A 60 A 230 A 280 A 320 A Cooling Air Air Air Water Water Water Water Gas flow +/-5% 7 l/min. 7 l/min. 7 l/min. 9 l/min. 9 l/min. l/min. l/min. Electrode diameter, mm.0-2.4.0-2.4.0-2.4.0-3.2.0-3.2.0-4.0.0-4.8 Cable, mm 2 5 5 2 4/6 (8 m) 2/5 (8 m) 2/5 (8 m) 8 (8 m) Weight at m height 0.8 kg.0 kg.0 kg 0.8 kg.0 kg. kg.2 kg Total weight kg, 4 m.7 kg.9 kg 2.0 kg.5 kg 2.0 kg 2.2 kg 2.7 kg 25
CATALOGUE Art. no. TIG RANGE 80392655 TIG Ergo 4m 7P 80392658 TIG Ergo Flex 4m 7P 80392656 TIG Ergo 8m 7P 80392657 TIG Ergo Flex 8m 7P 80392650 TIG Ergo RH 4m 7P 80392653 TIG Ergo RH Flex 4m 7P 8039265 TIG Ergo RH 8m 7P 80392652 TIG Ergo RH Flex 8m 7P 80392659 TIGRV 4m 7P 80392660 TIGRV 8m 7P 8039265 TIG ERGO V 4m Art. no. TIG 20 RANGE 80392795 TIG ERGO 20 4m 7P 8039280 TIG ERGO 20 FLEX 4m 7P 80392796 TIG ERGO 20 8m 7P 80392794 TIG ERGO 20 FLEX 8m 7P 80392797 TIG ERGO 20RH 4m 7P 80392802 TIG ERGO 20RH FLEX 4m 7P 80392798 TIG ERGO 20RH 8m 7P 80392799 TIG ERGO 20RH FLEX 8m 7P 80392803 TIG ERGO 20RV 4 m 7P 80392804 TIG ERGO 20RV 8 m 7P Art. no. TIG 22 RANGE 80392875 TIG ERGO 22 4m 7 POL 80392876 TIG ERGO 22 8m 7 POL 80392887 TIG ERGO 22 5M 7 POL 80392877 TIG ERGO 22RH 4m 7 POL 80392878 TIG ERGO 22RH 8m 7 POL 80392888 TIG ERGO 22RH 5M 7 POL 80392879 TIG ERGO 22RV 4m 7 POL 80392880 TIG ERGO 22RV 8m 7 POL 8039288 TIG ERGO 22 FLEX 4m 7 POL 80392882 TIG ERGO 22 FLEX 8m 7 POL 80392883 TIG ERGO 22RH FLEX 4m 7 POL 80392884 TIG ERGO 22RH FLEX 8m 7 POL Art. no. TIG 30 RANGE 8049240 TIG ERGO 30 4m 7P 8049243 TIG ERGO 30 FLEX 4m 7P 804924 TIG ERGO 30 8m 7P 8049242 TIG ERGO 30 FLEX 8m 7P 8049235 TIG ERGO 30RH 4m 7P 8049238 TIG ERGO 30RH FLEX 4m 7P 8049236 TIG ERGO 30RH 8m 7P 8049237 TIG ERGO 30RH FLEX 8m 7P 8049244 TIG ERGO 30RV 4m 7P 8049245 TIG ERGO 30RV 8m 7P Art. no. TIG 32 RANGE 8049250 TIG ERGO 32 4m 7P 804925 TIG ERGO 32 8m 7P 8049252 TIG ERGO 32RH 4m 7P 8049253 TIG ERGO 32RH 8m 7P Art. no. TIG 40 RANGE 8049225 TIG ERGO 40 4m 7P 8049226 TIG ERGO 40 8m 7P 80492235 TIG ERGO 40RH 4m 7P 80492236 TIG ERGO 40RH 8m 7P 80492237 TIG ERGO 40RV 4m 7P 80492238 TIG ERGO 40RV 8m 7P 8049224 TIG ERGO 40RH FLEX 4m 80492242 TIG ERGO 40RH FLEX 8m Art. no. TIG 45 RANGE 8049235 TIG ERGO 45 4m 7P 8049236 TIG ERGO 45 8m 7P 80492335 TIG ERGO 45 RH 4m 7P 80492336 TIG ERGO 45 RH 8m 7P 80492337 TIG ERGO 45 RV 4m 7P 80492338 TIG ERGO 45 RV 8m 7P ABBREVIATIONS TIG: TIG 20 = Model R = Remote control/dialog FLEX = Flexible torch body 8 m = Length RH = Horisontal regulation RV = Vertical regulation TIG Ergo V. 4m Art. no...8039265 7/6 pole adaptor Art. no...803006 7 pole TIG ZA adaptor Art. no...75990007 26
TIG ERGO WELDING TORCHES SUITABLE FOR TIG & MMA machines WELDING TORCHES RallyMIG PI 200 Air / Focus TIG 60/200 PI 200 Water PI 250 Air PI 250 Water PI 350 Air PI 350 W PI 500 TIG ERGO V * TIG ERGO RANGE 7 pole (*) (*) TIG ERGO 20/22 RANGE 7 pole * * (*) TIG ERGO 30/32 RANGE 7 pole * * * (*) TIG ERGO 40 RANGE 7 pole * * * (*) TIG ERGO 45 RANGE 7 pole * * * * * Recommended. *) Not recommendable for maximum performance Leather cover with zip For protection of the welding hose. For TIG /30 Art. no... 8030034 3 A Migatronic TIG welding torch is equipped with an easily replaceable control unit on the torch handle. As standard. the control unit consists of a keypad unit but for use on Migatronic TIG welding machines. we recommend a control unit with both keypad unit and control knob. 2 4 TIG Extension Cable For extension of TIG welding hose. After use you can choose the short TIG welding hose again. If you use a water-cooled TIG extension cable, the duty cycle of the standard torch remains unchanged because the TIG extension cable does not load the cooling unit. Art. no. Description 743036 m 25mm² Air 7-P w/o box 7430365 5m 25mm² Air 7-P w/o box 74303620 20m 25mm² Air 7-P w/o box 743557 m 50mm² Water 7-P w/o box 7435575 5m 50mm² Water 7-P w/o box 74355720 20m 50mm² Water 7-P w/o box 8030034 ZIP leather for TIG /30 27
WEAR PARTS FOR TIG ERGO WELDING TORCHES Wear parts boxes for TIG Ergo - 40 80228 Wear parts box TIG /30/32 8030029 pcs. Insulator TIG/30 8036372 pcs. Tungsten electrode WS2 Ø.6 superblue 8036374 pcs. Tungsten electrode WS2 Ø2.4 superblue 804005 pcs. Electrode clamp short TIG -30 804006 pcs. Electrode clamp MEDIUM TIG -30 804007 pcs. Electrode clamp long TIG -30 80400204 2 pcs. O-Ring Electrode cap TIG0/300 804202 2 pcs. Electrode holder Ø.6 TIG/30 804203 2 pcs. Electrode holder Ø2.4 TIG/30 8043022 5 pcs. Electrode clamp Ø.6 MM CuCr 8043023 5 pcs. Electrode clamp Ø2.4 MM CuCr 80440202 5 pcs. Gas Nozzle TIG/30 #5 80440203 5 pcs. Gas Nozzle TIG/30 #6 80440204 5 pcs. Gas Nozzle TIG/30 #7 Wear parts box for TIG /30/32 Art. no...80228 Set of standard wear parts Ø.6 TIG-32... 803007 Ø2.4 TIG-32... 803009 Set of wear parts. gas lenses (Not shown) Ø.6 TIG -32...8030040 Ø2.4 TIG -32...803004 80230 Wear parts box TIG 20/22/40 8030089 2 pcs. Insulator TIG 20-40 8036372 pcs. Tungsten electrode WS2 Ø.6 superblue 8036374 pcs. Tungsten electrode WS2 Ø2.4 superblue 80300200 pcs. Electrode cap short TIG 20-40 8030020 pcs. Electrode cap long TIG20-40 80300223 2 pcs. O-Ring for cap TIG20/40 803000 2 pcs. Electrode holder Ø.6 TIG20/40 80300 2 pcs. Electrode holder Ø2.4 TIG20/40 80330 5 pcs. Electrode clamp Ø.6 MM CuCr 803302 5 pcs. Electrode clamp Ø2.4 MM CuCr 80340002 5 pcs. Gas Nozzle TIG20/40 #5 80340003 5 pcs. Gas Nozzle TIG20/40 #6 80340004 5 pcs. Gas Nozzle TIG20/40 #7 Wear parts box for TIG 20/22/40 Art. no...80230 Set of standard wear parts Ø.6 TIG 20-40...80300274 Ø2.4 TIG 20-40...803008 Set of wear parts. gas lenses (Not shown) Ø.6 TIG 20-40...8030042 Ø2.4 TIG 20-40...8030043 28
WEAR PARTS FOR TIG ERGO WELDING TORCHES Wear parts for TIG Ergo /30/32 Position no. Art. no. Description No of pcs. 4 D 804007 Electrode clamp long TIG -30 5 D 804006 Electrode clamp MEDIUM TIG -30 6 D 804005 Electrode clamp short TIG -30 7 D 80400204 O-Ring Electrode cap TIG0/300 8a 8030094 Torch body TIG 60 mm 9a 8030095 8030005 80300052 Torch body TIG F 60 mm Torch body TIG F 0 mm Torch body TIG F 35 mm 8b 804003 Insulator TIG/30 9b 804003 8040035 8040036 Torch body TIG 30F 55 mm Torch body TIG 30 F 5 mm Torch body TIG 30 F 35 mm D 8030029 Insulator TIG/30 * D D 804302 8043022 8043023 8043024 Electrode clamp Ø.0 mm CuCr Electrode clamp Ø.6 mm CuCr Electrode clamp Ø2.4 mm CuCr Electrode clamp Ø3.2 mm CuCr TIG is a small. lightweight air-cooled TIG welding torch for use in hard-to-reach locations and where welding current does not exceed approx. 0 A DC. TIG is typically used for welding in stainless materials. TIG 30 and 32 are extra robust water-cooled TIG welding torches. Water-cooling provides low temperature in the torch and handle as well as better comfort and longer durability. TIG 30 and 32 are typically used for welding in steel. stainless steel and aluminium. TIG 30/32 can be equipped with all wear parts displayed to the right. and the control unit is easily replaced. 2 3 4 5a 5b 5c 9 * D D D * D D * D D 8042 8042 80422 80423 80424 80425 80426 80427 804402 804402 8044022 8044023 8044024 80420 804202 804203 804204 8044020 80440202 80440203 80440204 80440205 8044022 80440222 80440223 8044023 80440232 80440233 8036372 8036374 8036376 Gas lens.0 mm -30 copper/brass Gas lens.6 mm -30 copper/brass Gas lens 2.4 mm -30 copper/brass Gas lens II 3.2 mm -30 copper/brass Gas lens II.0 mm -30 cast brass Gas lens II.6 mm -30 cast brass Gas lens II 2.4 mm -30 cast brass Gas lens II 3.2 mm -30 cast brass Gas Nozzle GAS L TIG/30 #4 Gas Nozzle GAS L TIG/30 #5 Gas Nozzle GAS L TIG/30 #6 Gas Nozzle GAS L TIG/30 #7 Gas Nozzle GAS L TIG/30 #8 Electrode holder Ø.0 TIG/30 Electrode holder Ø.6 TIG/30 Electrode holder Ø2.4 TIG/30 Electrode holder Ø3.2 TIG/30 Gas Nozzle TIG/30 #4 Gas Nozzle TIG/30 #5 Gas Nozzle TIG/30 #6 Gas Nozzle TIG/30 #7 Gas Nozzle TIG/30 #8 Gas Nozzle long 48 mm #4L Gas Nozzle long 48 mm #5L Gas Nozzle long 48 mm #6L Gas Nozzle X-long 64 mm #4XL Gas Nozzle X-long 64 mm #5XL Gas Nozzle X-long 64 mm #6XL Tungsten electrodes. See page 4 * 803007 Std. wearing part set Ø.6 TIG /30/32 803009 Std. wearing part set Ø2.4 TIG /30/32 80228 Wearing part box TIG /30/32.6/2.4 D 80248 Wearing part box TIG /30/32 2.4/3.2 8030040 Wearing part set.6 gas TIG -30-32 803004 Wearing part set 2.4 gas TIG -30-32 The size of the gas nozzle (inside diameter). e.g. #4 = 4 x.6 mm = 6.4 mm. * D = Incl. in wearing part box/set. 29
WEAR PARTS FOR TIG ERGO WELDING TORCHES Wear parts for TIG Ergo 20/22/40 Position no. Art. no. Description No of pcs. 4 8030020 Electrode cap long TIG20-40 5 80300200 Electrode cap short TIG 20-40 6 80300223 O-Ring for cap TIG20/40 7a 8030096 80300237 Torch body TIG 20 70 mm TIG 22 Torch body 7b 80400422 Torch body TIG 40 80 mm 8a 8030097 8030098 80300238 Torch body TIG 20F 70 mm Torch body TIG 20F 90 mm TIG 22F Torch body 8b 80400423 Torch body TIG 40F 80 mm 9 8030089 Insulator TIG 20-40 * 80330 80330 803302 803303 803304 Electrode clamp Ø.0 mm CuCr Electrode clamp Ø.6 mm CuCr Electrode clamp Ø2.4 mm CuCr Electrode clamp Ø3.2 mm CuCr Electrode clamp Ø4.0 mm CuCr 8034 80342 80343 80344 80345 Gas lens.0 mm TIG 20-40 Gas lens.6 mm TIG 20-40 Gas lens 2.4 mm TIG 20-40 Gas lens 3.2 mm TIG 20-40 Gas lens 4.0 mm TIG 20-40 TIG 20 is typically used for production and on-site repairs in stainless steel and aluminium. TIG 22 is typically used for production and heavy-duty welding in aluminium. TIG 40 is designed for production and site repairs in stainless steel and aluminium in thick wall thicknesses. using up to 400 A DC. 2 3 4 * * 80340400 8034040 80340402 80340403 80340404 80340406 803004 803000 80300 803002 803003 8034000 80340002 80340003 80340004 80340005 80340006 80340007 Nozzle for gas lense TIG 20/22/40/45 #4 Nozzle for gas lense TIG 20/22/40/45 #5 Nozzle for gas lense TIG 20/22/40/45 #6 Nozzle for gas lense TIG 20/22/40/45 #7 Nozzle for gas lense TIG 20/22/40/45 #8 Nozzle for gas lense TIG 20/22/40/45 # Electrode holder Ø.0 TIG20/40 Electrode holder Ø.6 TIG20/40 Electrode holder Ø2.4 TIG20/40 Electrode holder Ø3.2 TIG20/40 Electrode holder Ø4.0 TIG20/40 Gas Nozzle TIG20/40 #4 Gas Nozzle TIG20/40 #5 Gas Nozzle TIG20/40 #6 Gas Nozzle TIG20/40 #7 Gas Nozzle TIG20/40 #8 Gas Nozzle TIG20/40 # Gas Nozzle TIG20/40 #2 5 80300220 Gas lens Insulator TIG20-40 9 * 8036372 8036374 Tungsten electrodes. See page 4 * 803008 Std. wearing part set Ø2.4 TIG 20/22/40 80300274 Std. wearing part set Ø.6 TIG 20/22/40 80230 Wearing part box TIG 20/22/40 8030042 Wearing part set.6 gas TIG 20-40 8030043 Wearing part set 2.4 gas TIG 20-40 The size of the gas nozzle (inside diameter). e.g. #4 = 4 x.6 mm = 6.4 mm. * D = Incl. in wearing part box/set. 30
WEAR PARTS FOR TIG ERGO WELDING TORCHES Wear parts for TIG Ergo 45 TIG 45 is the strongest model in our range of TIG welding torches. TIG 45 is water-cooled and designed for heavy-duty welding. TIG 45 is typically used for high performance production and on-site repairs in stainless steel and aluminium in thick wall-thicknesses. using up to 400A DC welding current. TIG 45 can be equipped with all wearing parts displayed to the right. and the control unit is easily replaced. Position no. Art. no. Description No of pcs. 4 8030020 Electrode cap long TIG20-40 5 80300200 Electrode cap short TIG 20-40 6 80300223 O-Ring for cap TIG20/40 7 80400425 Torch body TIG 45 8 D 80300239 Insulator TIG 45 9 * D 80330 80330 803302 803303 803304 803306 803307 Electrode clamp Ø.0 mm CuCr Electrode clamp Ø.6 mm CuCr Electrode clamp Ø2.4 mm CuCr Electrode clamp Ø3.2 mm CuCr Electrode clamp Ø4.0 mm CuCr Collet HD TIG45 4.0 mm Collet HD TIG45 4.8 mm *D 8030 Collet body TIG45.0-3.2 mm 2 8030 Collet body TIG45 3.2-4.8 mm 3 * D 8 * D 80340400 8034040 80340402 80340403 80340404 80340406 8036374 8036376 Nozzle for gas lense TIG 20/22/40/45 #4 Nozzle for gas lense TIG 20/22/40/45 #5 Nozzle for gas lense TIG 20/22/40/45 #6 Nozzle for gas lense TIG 20/22/40/45 #7 Nozzle for gas lense TIG 20/22/40/45 #8 Nozzle for gas lense TIG 20/22/40/45 # Tungsten electrodes. See page 4 * 8030036 Std. wearing part set Ø2.4 TIG 45 D 8030038 Std. wearing part set Ø3.2 TIG 45 The size of the gas nozzle (inside diameter). e.g. #4 = 4 x.6 mm = 6.4 mm. * D = Incl. in wearing part box/set. 3
TIG ADJUST The TIG Adjust air-cooled or watercooled torches allow you to weld in hard-to-reach places. (8030063) Small torch bocdy (8030064) Large torch body 80300609 Spring Air-cooled -20 (803006) 80300609 Spring TIG Adjust provides full 360 degree-of-freedom TIG Adjust is designed for welding operations requiring frequent adjustments of the torch body. The torch body can be turned in any direction and has longer life than standard flexible torch bodies. Transition piece for 40 (8040032) 2 pcs. O-ring (4357247) Water-cooled 30-40 (803006) Adapter (294208) TIG 32-40-45 Air-cooled or water-cooled models Torch bodies in two different sizes Small torch body: standard wear parts from the TIG -30 range Large torch body: standard wear parts from the TIG 20-40 range Supplied without wear parts as standard TIG Adjust suits the two different size torch handles of the TIG Ergo range. and all TIG Ergo control units are applicable. Available in all 4 m and 8 m TIG Ergo models and also in special lengths for regular orders. Can be ordered as s standard customs-built solution Variant Article no. TIG TIG Adjust 4 m* 80392705 Small TIG Adjust 8 m* 80392706 torch body TIG R Adjust 4 m* 80392700 8030063 TIG R Adjust 8 m* 8039270 TIG 20 TIG 20 Adjust 4 m* 80392845 Large TIG 20 Adjust 8 m* 80392846 torch body TIG 20R Adjust 4 m* 80392847 8030064 TIG 20R Adjust 8 m* 80392848 Variant Article no. TIG 30 TIG 30 Adjust 4 m* 8049290 Small TIG 30 Adjust 8 m* 804929 torch body TIG 30R Adjust 4 m* 8049285 8030063 TIG 30R Adjust 8 m* 8049286 TIG 40 TIG 40 Adjust 4 m* 80492265 Large TIG 40 Adjust 8 m* 80492266 torch body TIG 40R Adjust 4 m* 80492285 8030064 TIG 40R Adjust 8 m* 80492286 Art. no. TIG ADJUST RANGE 80392705 TIG Ergo ADJUST 4m 7p 80392706 TIG Ergo ADJUST 8m 7p 80392700 TIG RH Ergo ADJUST 4m 7p 8039270 TIG RH Ergo ADJUST 8m 7p 80392845 TIG 20 Ergo ADJUST 4m 7p 80392846 TIG 20 Ergo ADJUST 8m 7p 80392847 TIG 20RH Ergo ADJUST 4m 7p 80392848 TIG 20RH Ergo ADJUST 8m 7p 8049290 TIG 30 Ergo ADJUST 4m 7p 804929 TIG 30 Ergo ADJUST 8m 7p 8049285 TIG 30RH Ergo ADJUST 4m 7P 8049286 TIG 30RH Ergo ADJUST 8m 7P 80492265 TIG 40 Ergo ADJUST 4m 7p 80492266 TIG 40 Ergo ADJUST 8m 7p 80492285 TIG 40RH Ergo ADJUST 4m 7p 80492286 TIG 40RH Ergo ADJUST 8m 7p Art. no. TIG ADJUST RANGE No of pcs. 8030063 Small torch body 8030064 Large torch body 803006 Body gascooled 803006 Body watercooled 80300609 Spring TIG Adjust 8040032 Transition piece for 20HD-40 4357247 O-ring 294208 Adaptor /4"UNF-3/8"24UNF left The products delivered may differ from the photos in the catalogue. 32
SPECIAL PARTS FOR TIG 20/22/40 Special torch body for Stubby system Stubby parts are used for TIG 20 and TIG 40. Stubby parts reduce the height of the torch and provide better access to hard-toreach locations. 2 TIG 20-40 3 4 Gas nozzle from the TIG -30 range. # 4-5-6-7. Gas nozzle from the TIG -30 range. # 4-5-6-7-. Pos. no. Art. no. System Stubby No of pcs 80330030 Collet Ø.0mm "Stubby" 8033003 Collet Ø.6mm "Stubby" 80330032 Collet Ø2.4mm "Stubby" 80330033 Collet Ø3.2mm "Stubby" 2 80300236 Insulator for gas lens "Stubby" 3 80342 Gas lens.0mm "Stubby" 803422 Gas lens.6mm "Stubby" 803424 Gas lens 2.4mm "Stubby" 4 803020 Electrodeholder "Stubby" 80300286 80300287 80300288 80300289 Wearing parts set TIG Stubby ø.6 Wearing parts set TIG Stubby ø2.4 Wearing parts set TIG Stubby ø.6 gaslense Wearing parts set TIG Stubby ø2.4 gaslense 33
SPECIAL PARTS FOR TIG 20/22/40 Special torch body WP24 / WP24 Mini The torch body fits in everywhere. 3 2 70 5 6 9 4 90 7 8 Pos. no. Art. no. WP24 No of pcs 80300225 Insulator 2 80330009 Electrode clamp.0mm 803300 Electrode clamp.6mm 803300 Electrode clamp 2.4mm 3 803006 Electrode holder.0mm 803007 Electrode holder.6mm 803008 Electrode holder 2.4mm 4 80340024 Gas nozzle #4 Ø6.5mm 80340025 Gas nozzle #5 Ø8.0mm 80340026 Gas nozzle #6 Ø9.5mm 5 80300028 WP24G torch head body air 70 6 80400309 WP24W torch head body water 90 7 8040032 Transition piece for 20HD-40 8 4357247 O-ring 9 29420 Socket 3/8"24UNF right WX5 294208 Adaptor /4"UNF-3/8"24UNF left 80300284 80300285 80238 Wearing parts set TIG WP24 ø.6 Wearing parts set TIG WP24 ø2.4 Wear parts box TIG WP24/DSF225 The size of the gas nozzle (inside diameter). e.g. #4 = 4 x.6 mm = 6.4 mm. Pos. no. Art. no. WP24 Mini No of pcs 803003 WP24 insulator mini for gaslens 5 2 803300 Electrode clamp.6mm 2 803300 Electrode clamp 2.4mm 3 80428 TIG /30 gas lens mini ø.6 5 3 80429 TIG /30 gas lens mini ø 2.4 5 4 8044098 Gas nozzle for TIG/30 mini #5 Ø8.0 4 8044099 Gas nozzle for TIG/30 mini #6 Ø9.6 4 2 3 34
CUSTOM-BUILT AND SPECIAL SOLUTIONS Special torch body/-head DSF 225 FLEX DSF 225 FLEX is a flexible water-cooled torch body with replaceable head. Pos. nr. Art. no. TIG 20 DSF 225x3B # 4 m 7 pole 80392889 TIG 20 DSF 225x3B # 8 m 7 pole 80392890 TIG 30 DSF 225x3B # 4 m 7 pole 80492339 TIG 30 DSF 225x3B # 8 m 7 pole 80492340 DSF FLEX 80392889 TIG Ergo 20 DSF 225x3B 4m 7p 80392890 TIG Ergo 20 DSF 225x3B 8m 7p 80492339 TIG Ergo 30 DSF 225x3B 4m 7p 80492340 TIG Ergo 30 DSF 225x3B 8m 7p 8030006 Torch head small 70 2 803009 Torch head small straight 2 3 70 Small torch body # (*) /30 80 Small torch body # (*) /30 90 Small torch body (*) /30 4 70 Small torch body # (**) WP24 3 8030007 Torch head small 90 4 80300226 Torch head small WP24 70 5 8030087 Torch head big 70 6 8030090 Torch head big 80 7 80400307 FLEX torch body DSF 225 7a 80300249 FLEX torch body DSF 225 Air C 8 8040032 Transition piece for 20HD-40 9 8030030 O-ring Ø7.5x.5mm 294208 Adaptor /4"UNF-3/8"24UNF left 80228 80238 80230 Wearing part box TIG /30/32.6/2.4 Wearing part box TIG WP24/DSF225 Wearing part box TIG 20/22/40 5 70 Large torch body (*) 20/40 75 mm 6 80 Large torch body (*) 20/40 7 8 7a 9 (*) Small torch body = wear parts -30. Large torch body = wear parts 20-40. (**) wp 24 wear parts. 35
WEAR PARTS ACCORDING TO INDIVIDUAL REQUIREMENTS As standard. Migatronic TIG welding torches are supplied without wear parts. This allows you to equip your torches with wear parts as required. For list of wear parts for the individual models of TIG welding torches. please refer to previous pages. If you choose standard wear parts. the TIG torch body will be equipped with electrode holder and electrode clamp as well as ceramic gas nozzle. the function of which is to guide the shielding gas towards the weld zone so at to displace the atmospheric air. For better precision and control during TIG welding. we recommend gas lenses for the TIG torch body which give a very uniform flow of the shielding gas and allow a longer electrode stickout. Use of gas lens may also reduce the gas consumption. TIG FLEX torch body Migatronic TIG FLEX torch bodies are flexible and shapeable for difficult welding operations. If several shapings are required. we recommend a turnable TIG torch body. For custombuilt and special solutions. please refer to page 32. Shaping the torch body requires caution; the torch body must be cooled off and the maximum bending angle is 45. Use your thumbs for support of the torch body as shown below. Gas flow Gas flow Use your thumbs for support Shielding gas jet Standard With gas lens 36
PLASMA CUTTING TORCHES Plasma cutting torch for Zeta 60. 6 m hose Art. no...8069009 Wearing part box Art. no...80233 Wear Parts for Plasma Cutting Handle Pos. Art. no. Description No of pcs. no. Zeta 60 80650007 Torch body 2 806009* Electrode 2a 8060 Electrode. long 3 806409* Insulating ring 4 4 4 4 4a 4a 4a 4a 80630024 80630023 80630022* 8063002 80630025 80630026 80630027 80630028 Cutting nozzle. short ø0.9 Cutting nozzle. short ø.0 Cutting nozzle. short ø. Cutting nozzle. short ø.2 Cutting nozzle. long ø0.9 Cutting nozzle. long ø.0 Cutting nozzle. long ø. Cutting nozzle. long ø.2 5 806402* Protection cap 6 806009* Distance spring 806006 Diffuser 806005 O-ring 2 806008 Distance ring (2 legs) 22 806009 Distance ring ø2mm 23 8060020 Distance ring ø2mm (4 legs) 80233 Wearing part box 37
PLASMA CUTTING TORCHES Plasma cutting torch for Zeta 0. 6 m hose Art. no...80690095 Plasma torch for Zeta 0. m Art. no...80690097 Plasma torch for Zeta 0. 5 m Art. no...80690098 Plasma cutting torch for Zeta 0. 6 m hose (automation) Art. no...80690096 Pos no. Art. no. Description No of pcs. Zeta 0 806500 Torch cutting head x Zeta 0 Automat 806500 Torch cutting head x a 806002 O-ring x x b 8060022 Cooling tube x x 2 8060030 Handle. incl. switch x 2 8060032 Machine tube handle x 2a 806007 Switch x 3* 8060 Electrode x x 4 8060024 Gas diffuser 30-70A x x 5* 8060025 Gas diffuser 80-20A x x 6 80630204 Cutting nozzle. ø0.9 x x 7. 80630205 Cutting nozzle. ø.0 x x 7.2 80630206 Cutting nozzle. ø. x x 7.3 80630207 Cutting nozzle. ø.2 x x 8. 80630208 Cutting nozzle. ø.4 x x 8.2* 80630209 Cutting nozzle. ø.5 x x 8.3 806302 Cutting nozzle. ø.6 x x 9 806403 Protection cap 30-70A x x * 806404 Protection cap 80-20A x x * 8060026 Distance ring (2 legs) x x 2 806302 Gouging tip x x 3 806405 Protection cap x x 4 806406 Protection cap. gouging x x * = Pre-assembled as standard 2 80239 Wearing part box x x PT-0 a 2a b 3 4 5 4 Wearing part box Art. no...80239 6 7 8 2 9 3 4 38
PLASMA WELDING TORCHES Art. no. PWM-4A / PWM-300 Comments 84022578 PWM-4A 80 w/o hose 84022847 PWM-300 80 w/o hose 809220 Hose PWM-4A/PWM300.0 m 8092250 Hose PWM-4A/PWM300.5 m 80922200 Hose PWM-4A/PWM300 2.0 m 80922300 Hose PWM-4A/PWM300 3.0 m 80922350 Hose PWM-4A/PWM300 3.5 m 80922400 Hose PWM-4A/PWM300 4.0 m 80922450 Hose PWM-4A/PWM300 4.5 m 80922500 Hose PWM-4A/PWM300 5.0 m 80922550 Hose PWM-4A/PWM300 5.5 m 80922600 Hose PWM-4A/PWM300 6.0 m 80922650 Hose PWM-4A/PWM300 6.5 m 80922700 Hose PWM-4A/PWM300 7.0 m 80922750 Hose PWM-4A/PWM300 7.5 m 80922800 Hose PWM-4A/PWM300 8.0 m 7380000 Assembly box for Plasma hoses For Plasma welding with hoses longer than 8m 74330800 Extension hose PMW4A/300 8.0 m Assembly box for Plasma hoses Art. no...7380000 Extension hose PMW4A/300 8.0 m Art. no...74330800 Hose PWM-4A/PWM300 Art. no...809220-80922800 39
WEAR PARTS FOR PLASMA WELDING TORCHES PWM-4A Position no. Art. no. PWM-4A 84084064 Ceramic nozzle std. f/4a 2 8409847 Nozzle std..58 0A f/4a 8409848 Nozzle std. 2.37 80A f/4a 8409849 Nozzle std. 3.8 220A f/4a 8409889 Weld.tip 40A long 8409890 Weld.tip 90A long 840989 Weld.tip 50A long 8409892 Weld.tip 90A long 3 8036396 Tungsten electrode WL20 ø4.8x9 point 20 degrees 8409834 Electrode long f/4a 4 8408402 Gas guidance & distributor 4A 4A 840840 Gas guide f/4a 4B 84092204 Gasdistributor white f/pwm-4a 5 84080560 O-ring f/4a (red) 6 84080528 O-ring f/4a & 6A 7 84084069 Washer f/ceramic nozzle 4A 8 84084024 Collar f/4a 9 84084040 Gas lens f/4a 8408404 Torch body PWH-4A 70 84084054 Torch body PWM-4A 84080530 O-ring f/4a 2 8409876 Electrode tong f/pwm-4a 3 8408458 Electrode cap f/4a 8409877 Back cup PWM-4A long 4 8409873 Adjusting device f/4a & 6A Position no. Art. no. PWM-300 84086542 Ceramic nozzle f/pwm-300 & 6A 2 84086575 Nozzle 2.36 200A f/300 84086582 Nozzle 2.87 250A f/300 84086572 Nozzle 3.8 300A f/300 84084370 Nozzle 200AMP-LG PWM-300 8408437 Nozzle 250AMP-LG PWM-300 84084372 Nozzle 300 AMP-LG PWM-300 3 84092863 O-ring PWM-6A 4 8036396 Tungsten electrode WL20 ø4.8x9 point 20 degrees 5 84092956 O-ring PWM-6A 6 84086509 Gas guide f/6a & 300 7 8408665 Gas distributor white f/300 8 8408654 Adaptor f/ceramic nozzle 6A 9 8408652 Washer f/6a 8408053 O-ring 25 x 05 f/6a 84086649 Torch body PWM-300 2 84083487 O-ring f/6a & PWM-300 3 84086650 Elektrode tong f/pwm-300 4 84086654 Electrode cap f/300 5 8408657 Key f/nozzle PWM-300 6 84086653 Adjusting device f/pwm-300 2 3 4 5 6 7 8 9 2 3 4 PWM-300 5 6 40
TUNGSTEN ELECTRODES Migatronic s range of high-quality tungsten electrodes is developed in co-operation with Europe s leading manufacturer of tungsten electrodes. No risk of radioactive radiation of users and environment Pointed electrode tip and stable arc after long service life Excellent ignition and reignition properties Improved welding quality and welding safety Here you can see the difference between arcs ignited with high-quality and lowquality tungsten electrodes respectively. Art. no. Description No of pcs. 80360022 Tungsten electrode WP Ø.6 green 80360024 Tungsten electrode WP Ø2.4 green 80360026 Tungsten electrode WP Ø3.2 green 80360042 Tungsten electrode WL Ø.6 black 80360043 Tungsten electrode WL Ø2.4 black 80360044 Tungsten electrode WL Ø3.2 black 80360092 Tungsten electrode WL20 Ø.6 blue 80360094 Tungsten electrode WL20 Ø2.4 blue 80360095 Tungsten electrode WL20 Ø3.2 blue 803637 Tungsten electrode WS2 Ø.0 superblue 8036372 Tungsten electrode WS2 Ø.6 superblue 8036373 Tungsten electrode WS2 Ø2.0 superblue 8036374 Tungsten electrode WS2 Ø2.4 superblue 8036376 Tungsten electrode WS2 Ø3.2 superblue 8036377 Tungsten electrode WS2 Ø4.0 superblue 8036378 Tungsten electrode WS2 Ø4.8 superblue Green: Applicable for welding of aluminium Black: Applicable for welding of mild steel and stainless steel Blue: Applicable for welding of mild steel and stainless steel Super Blue: Applicable for welding of mild steel, stainless steel and aluminium. The electrode has excellent ignition and reignition properties and contains no substances hazardous to health. High-quality tungsten Low-quality tungsten: typically sideways arc ignition. the arc flashes and wanders slowly to the electrode tip which has to be cut off and reground. 4
WEAR PARTS IN RETAIL BLISTER PACKS Standard Migatronic wear parts are also available in blister packs that are ready to hang on wall displays. Clear labeling with barcode. item text and item number makes re-ordering easy. Blister packs are intended for customers requiring small quantity purchases. Please contact Migatronic for more information. Art. no. Description 88002 Blister pack x Dinse coupling socket 35-70 mm2 892 Blister pack x extension socket 35-50 mm² female 829006 Blister pack Dinse plug -25B ømm male 73949039 Blister pack kit wire feed rolls 2-roll 0.8 73949040 Blister pack kit wire feed rolls 2-roll.0 73949054 Blister pack kit wire feed rolls MWF 0.8 V-groove white 73949055 Blister pack kit wire feed rolls MWF.0 V-groove blue 73949056 Blister pack kit wire feed rolls MWF.0 U-groove blue 73949057 Blister pack kit wire feed rolls MWF.2 V-groove red 73949058 Blister pack kit wire feed rolls MWF.2 U-groove red 73949083 Blister pack kit wire feed rolls MWF 0.6 V-groove black/ white 80902 Blister pack retaining clamp ML20/30/50 x2 809600 Blister pack retaining clamp ML250 x2 809020 Blister pack tip adaptor for ML20/30/50 34mm x2 80902 Blister pack x 2 Tip adaptor for ML50C/6 (Plus 5) 80940 Blister pack tip adaptor for mv450/550 m8 25mm x2 809406 Blister pack tip holder for mv450/550 cucrzr 25mm x2 80960 Blister pack tip adaptor for ml250 m6 37mm x2 809602 Blister pack tip adaptor for ml250 m6 35mm x2 809604 Blister pack tip adaptor for ml-mv240 5mm cucrzr x2 809640 Blister pack tip adaptor for ML300-360 25 mm CuCrZr x2 802930 Blister pack gas diffuser for ML300/360 white x2 803820 Blister pack x contact tip ø.0 m6 ø8x28mm CuCrZr 8038202 Blister pack x contact tip ø.2 m6 ø8x28mm CuCrZr 8039 Blister pack x contact tip ø0.6 m6 ø6x25mm E-Cu 80392 Blister pack x contact tip ø0.8 m6 ø6x25mm E-Cu Art. no. Description 80393 Blister pack x contact tip ø.0 m6 ø6x25mm E-Cu 80394 Blister pack x contact tip ø.2 m6 ø6x25mm E-Cu 8039200 Blister pack x contact tip ø0.8 m6 ø8x28mm CuCrZr 803920 Blister pack x contact tip ø0.6 m6 ø8x28mm E-Cu 8039202 Blister pack x contact tip ø0.8 m6 ø8x28mm E-Cu 8039203 Blister pack x contact tip ø.0 m6 ø8x28mm E-Cu 8039204 Blister pack x contact tip ø.2 m6 ø8x28mm E-Cu 8049022 Blister pack Gas nozzle for ML50/6 for spot welding 8049023 Blister pack x 2 gas nozzle ML20/30/50/6 conic 8049029 Blister pack nozzles for ML50/6 for innershield wire 8049500 Blister pack gas nozzle for ML50/6 cylindrical 804960 Blister pack x 2 gas nozzle ML250 conic 80496 Blister pack x 2 gas nozzle ML/MV240 conic 80229309 Blister pack gas diffuser for MV450/550 white x 2 80239 Blister pack x contact tip ø0.8 m8 øx30mm E-Cu 802392 Blister pack x contact tip ø.0 m8 øx30mm E-Cu 802393 Blister pack x contact tip ø.2 m8 øx30mm E-Cu 80239200 Blister pack x5 contact tip ø0.8 m8 ø8x30mm CuCrZr 8023920 Blister pack x5 contact tip ø.0 m8 ø8x30mm CuCrZr 80239202 Blister pack x5 contact tip ø.2 m8 ø8x30mm CuCrZr 80239204 Blister pack x5 contact tip ø.4 m8 ø8x30mm CuCrZr 80239206 Blister pack x5 contact tip ø.0 m8 øx30mm CuCrZr 80239207 Blister pack x5 contact tip ø.2 m8 øx30mm CuCrZr 80249303 Blister pack x2 gas nozzle ML300/350/MV450/550/FKS550 conic 8030989 Blister pack insulator for TIG 20/40 x2 80309200 Blister pack electrode cap short for TIG20/40 x2 42
Art. no. Description 8030920 Blister pack electrode cap long for TIG20/40 x2 8030929 Blister pack insulator for TIG/30 x2 80309223 Blister pack O-ring for electrode cap TIG20/40 8039000 Blister pack with collet body for Ø.6 TIG20/40x2 803900 Blister pack with collet body for Ø2.4 TIG20/40x2 8039002 Blister pack with collet body for Ø3.2 TIG20/40x2 80339 Blister pack with collet for Ø.6mm CuCrZr x2 TIG20/40 803392 Blister pack with collet for Ø2.4mm CuCrZr x2 TIG20/40 80339 Blister pack with electrode collet ø.6 mm CuCr x2 803392 Blister pack with electrode collet ø2.4 mm CuCr x2 803393 Blister pack with electrode collet ø3.2 mm CuCr x2 80349002 Blister pack x2 Gas nozzle for TIG20/40 #5 Ø8,0 80349003 Blister pack x2 Gas nozzle for TIG20/40 #6 Ø9,0 80349004 Blister pack x2 Gas nozzle for TIG20/40 #7 Ø,0 80349005 Blister pack with gas nozzle for TIG20/40 #8 Ø2.5 x2 80349006 Blister pack with gas nozzle for TIG20/40 # Ø6,0 x2 80349007 Blister pack with gas nozzle for TIG20/40 #2 Ø9,5 x2 804095 Blister pack electrode cap short for TIG/30 x2 804096 Blister pack electrode cap medium for TIG/30 x2 804097 Blister pack electrode cap long for TIG-30 x2 80409204 Blister pack O-ring for electrode cap TIG/30 804920 Blister pack with collet body for ø.0 TIG/30 8049202 Blister pak med elektrode holder til ø.6tig/30x2 8049203 Blister pack with collet body for ø2.4 TIG/30 x2 8049204 Blister pack with collet body ø3.2 TIG/30 x2 804392 Blister pack with electrode collet ø.0 mm CuCr x2 8043922 Blister pack with electrode collet ø.6 mm CuCr x2 8043923 Blister pack with collet for ø2.4mm CuCr x2 8043924 Blister pack with electrode collet ø3.2 mm CuCr x2 8044920 Blister pack Gas nozzle for TIG/30 #4 Ø6.5 x2 80449202 Blister pack Gas nozzle for TIG/30 #5 Ø8.0 x2 80449203 Blister pack Gas nozzle for TIG/30 #6 Ø9.0 x2 80449204 Blister pack Gas nozzle for TIG/30 #7 Ø.0 x2 80449205 Blister pack Gas nozzle for TIG/30 #8 Ø2.5 x2 80559009 Blister pack x MMA electrode holder 450A 805590 Blister pack MMA electrode holder 200A 80559028 Blister pack spare head 45/90 400/600A 80559036 Blister pack x electrode holder 600A 80559037 Blister pack x electrode holder 300A 80559038 Blister pack x electrode holder 200A 805690 Blister pack earth clamp 250A 805690 Blister pack earth clamp 400A 8056902 Blister pack earth clamp 500A Art. no. Description 80569022 Blister pack screw earth clamp 600A 806099 Blister pack distance ring for CUT 45/63 x2 806098 Blister pack double pointed x2 for CUT40/60 806099 Blister pack spacer ø2mm x2 for CUT40/60 8060920 Blister pack spacer 4-pointed ø2mm x2 for CUT40/60 8060922 Blister pack cooling tube for ZETA0 x2 8060924 Blister pack gas distributor 30/70 for ZETA0 x2 8060925 Blister pack gas distributor 80/20 for ZETA0 x2 8060926 Blister pack double pointed spacer for ZETA0 x2 8069009 Blister pack electrode for CUT 45-63 x2 80690 Blister pack electrode for ZETA0 x5 8063902 Blister pack cutting tip ø.2 for CUT40/60 x5 80639022 Blister pack cutting tip ø. for CUT40/60 x5 80639023 Blister pack cutting tip ø.0 for CUT40/60 x5 80639024 Blister pack cutting tip ø0.9 for CUT40/60 x5 80639025 Blister pack cutting tip long ø0.9 for CUT40/60 x5 80639026 Blister pack cutting tip long ø.0 for CUT40/60 x5 80639027 Blister pack cutting tip long ø. for CUT40/60 x5 80639028 Blister pack cutting tip long ø.2 for CUT40/60 x5 80639204 Blister pack cutting tip ø0.9 for ZETA0 x5 80639205 Blister pack cutting tip ø.0 for ZETA0 x5 80639206 Blister pack cutting tip ø. for ZETA0 x5 80639207 Blister pack cutting tip ø.2 for ZETA0 x5 80639208 Blister pack cutting tip ø.4 for ZETA0 x5 80639209 Blister pack cutting tip ø.5 for ZETA0 x5 806392 Blister pack cutting tip ø.6 for ZETA0 x5 806392 Blister pack gouging tip for ZETA0 x2 806492 Blister pack retaining cap for CUT45/63 x2 806493 Blister pack retaining cap for 30/70A ZETA0x 806494 Blister pack retaining cap for 80/20A ZETA0x 806495 Blister pack retaining cap gouging for ZETA0x 806496 Blister pack shield cap gouging for ZETA0x2 806499 Blister pack Insulation ring for CUT45/63x5 899046 Blister pack x magnifying lens 5 x 8 mm, +.5 899047 Blister pack x magnifying lens 5 x 8 mm, +2.0 899048 Blister pack x magnifying lens 5 x 8 mm, +2.5 89905 Blister pack x magnifying lens 5 x 8 mm, +.0 899054 Blister pack x lens clear colour 60 x mm 899057 Blister pack x Lens DIN 60 x mm 899058 Blister pack x Lens DIN, 60 x mm 8949028 Blister pack x. Nozzle and wirecutter large 897908 Blister pack cleaning needles set short 8979209 Blister pack x D75/S80 gas igniter OX 8307949 Blister pack tip adaptor for ML/MV 240 brass 5mm x 2 83079480 Blister pack gas diffuser for ML/MV240 black x 2 43
MIGATRONIC WORLDWIDE www.migatronic.fi www.migatronic.no www.migatronic.se www.migatronic.dk www.migatronic.co.uk www.migatronic.nl www.migatronic.de www.migatronic.cz www.migatronic.fr www.migatronic.it www.migatronic.hu www.migatronic.in www.migatronic.cn www.migatronic.com 524907 (208)