Catalogue: TEH_02H. Hardware for Sliding Doors (Timber)

Catalogue: TEH_02H Hardware for Sliding Doors (Timber)

Hardware for Sliding Doors (Timber) Contents Information Introduction HELM Hardware for Timber Sliding Doors HELM Accessories HELM Modular.Concept 0 General Information 0 HELM Hardware Modules 2 HELM 0 General Information HELM 0 up to 0 kg leaf weight 20 HELM General Information 2 HELM up to 0 kg leaf weight 2 HELM 7 General Information 2 HELM 7 up to 0 kg leaf weight HELM General Information HELM up to 90 kg leaf weight HELM 20 General Information 0 HELM 20 up to 20 kg leaf weight 2 HELM 0 General Information 0 HELM 0 up to 70 kg leaf weight 0 Accessories Flush and Pull Handles Appendix Technical Specifications 72 Sample of Request for Proposal 7 Enquiry Form 7 2

Hardware for Sliding Doors (Timber) General Information General Information Introduction The HELM range comprises all hardware solutions from lightweight sliding doors to leaf weights of 70 kg. The hardware is primarily used for timber leaves, it can, however, also be employed for sliding leaves of metal or plastic. For the use of all glass doors we refer to the respective separate catalogue. The hardware excels at precise rolls, simple mounting and high-quality workmanship. The HELM hardware is, of course, tested according to DIN 27:99. For the medium and most common range of applications (sliding doors of 0-0 kg) the Modular.Concept 0 has been developed (pages 0-7). By means of only one track system and various accessory modules all applications can be covered in a simple manner. The hardware HELM 20 and HELM 0 (from page 0) make the range perfect in the upper weight classes and can also be used outdoors as all components are made of non-corroding materials. On the pages -7 you will find an overview of all hardware and fields of application.

Hardware for Sliding Doors (Timber) Overview Hardware

Overview Hardware for Sliding Doors (Timber) Overview Hardware HELM 0 HELM HELM 7 HELM HELM 20/20 B HELM 0/0 B Leaf weight 0 kg 0 kg 0 kg 90 kg 20 kg 70 kg Hardware Overview Mounting Type: ceiling mounting wall mounting Direct wall mounting Field of Application: residential commercial Type of Door: single leaf and multiple leaf synchronised telescopic damper and soft closing device types: damper and soft closing device door catcher Track Surface: stainless steel finish anodised Pelmetting pelmet 2 = yes = no track drilled on the side 2 pelmet integrated in the track system

Hardware for Sliding Doors (Timber) Overview Hardware HELM 0 up to 0 kg leaf weight Track aluminium, with drilled holes for ceiling mounting in stock lengths of 000 mm or cut to size Trolley double pair, with plain bearings Realisable options single and multiple leaf constructions mounting options: ceiling mounting wall mounting tested according to DIN 27: 99 00,000 cycles Further information from page HELM up to 0 kg leaf weight Track aluminium, or stainless steel finish anodised, with drilled holes for ceiling mounting in stock lengths of 000 mm or cut to size Trolley double pair, with plain bearings Realisable options single and multiple leaf constructions mounting options: ceiling mounting wall mounting clip-on pelmet tested according to DIN 27: 99 00,000 cycles Further information from page 2 use of SmartStop possible HELM 7 up to 0 kg leaf weight Track aluminium, or stainless steel finish anodised, with drilled holes for ceiling mounting in stock lengths of 000 mm or cut to size Trolley double pair, with ball bearings Realisable options single and multiple leaf constructions low headroom installation mounting options: ceiling mounting and wall mounting clip-on pelmet SmartStop telescopic fitting synchronised opening tested according to DIN 27: 99 200,000 cycles Further information from page 2

HELM up to 90 kg leaf weight Track aluminium, with drilled holes for wall or ceiling mounting in stock lengths of 000 mm or cut to size Special feature enclosed track system: consisting of track, pelmet, end caps and plastic strip Trolley double roller, with ball bearings Realisable options single and multiple leaf constructions mounting options: ceiling mounting and wall mounting synchronised opening tested according to DIN 27: 99 00,000 cycles Hardware for Sliding Doors (Timber) Overview Hardware Hardware Overview Further information from page HELM 20 up to 20 kg leaf weight Track aluminium, in stock lengths of 000 mm or cut to size, with drilled holes for ceiling mounting Trolley double pair, with ball bearings Realisable options single and multiple leaf constructions mounting options: ceiling mounting and wall mounting clip-on pelmet telescopic fitting synchronised opening Note: The design of pelmet and cover caps requires the pelmet to be longer (7 mm) than the track. tested according to DIN 27: 99 00,000 cycles Further information from page 0 HELM 0 up to 70 kg leaf weight Track aluminium, in stock lengths of 000 mm or cut to size, with drilled holes for ceiling mounting Trolley double pair, with ball bearings Realisable options single and multiple leaf constructions mounting options: ceiling mounting and wall mounting clip-on pelmet telescopic fitting synchronised opening Note: The design of pelmet and cover caps requires the pelmet to be longer (7 mm) than the track. tested according to DIN 27: 99 00,000 cycles Further information from page 0 7

Hardware for Sliding Doors (Timber) Accessories Clip-on pelmet for HELM and HELM 7 Clip-on aluminium pelmetting ensures an attractive look wherever HELM hardware is used. In case of the types and stainless steel finish anodised the pelmets are simply clipped on the outer face of the profile. Product advantages simple mounting pelmetting on one or both sides possible Further information from page HELMatic 20 volt drive HELMatic for HELM 7, HELM 20 and HELM 0 HELMatic moves doors The new generation of drives for HELM 7, HELM 20 and HELM 0 With the HELMatic 20-volt drive sliding doors and light sliding gates up to 0 kg door weight can be opened and closed fully automatically. With wireless push-button, motion detector as well as comfortable push&go function, every sliding door can be operated without effort using the HELMatic. In case of power failure the door can be pushed open manually. The HELMatic was rated with the test result "good" in the user text of the "Deutsche Gesellschaft für Gerontotechnik (GGT)" (German service company for gerontological technology) and is certified according to DIN EN 20-2 - low energy operation. Motion detector SmartStop for HELM 7 We put an end to sliding leaves that close noisily and bounce back. Thanks to our SmartStop for the use on one or both sides we stop each door and pull it noiselessly into the final position. This piece of hardware makes sure that closed leaves remain closed. Product advantages door is slowed down towards the stop positions and pulled into the final position. gentle, quiet and comfortable closing slowing down can be effected on one or both sides mounting in the track profile employed air cylinder is maintenance-free door is held in the stop positions, thus an additional door catcher is not required Further information from page 9

Hardware for Sliding Doors (Timber) Accessories HELM projection track for pelmetting The projection track for pelmetting has to be combined with the track for ceiling mounting. Distances as frames or baseboards can be easily leveled. Easy assembly with enclosed screws. Product advantages complete system including pelmet in same appearance easy installation Accessories Further information from page HELM spacer profile The spacer profile is used to extend distances to the wall when there are frames or baseboards. Wooden substructions are no longer required. This simplifies the installation and makes a more attactive look. Product advantages no substructions necessary easy installation Further information from page Pull handles and flush handles You will find the suitable pull models for timber sliding doors on the pages - 7 as well as in the KWS catalogues. Further information from page 9

HELM Modular.Concept 0 up to 0 kg leaf weight 0

The idea Sliding doors of timber can be used in a wide range of contexts in both living and working environments. As well as their traditional application as normal doors for rooms, they are increasingly being used as room dividers. Regardless of whether they are used to separate kitchen areas, walk-in wardrobes or as part of office partitions, the possibilities are numerous, and therefore the range of corresponding fitting systems are so versatile. HELM Modular.Concept 0 up to 0 kg leaf weight HELM Modular.Concept 0 For this reason HELM has developed the compact yet flexible Modular.Concept 0. The use of just one track system with a range of accessory modules enables us to respond to different individual requirements. From simple single timber doors up to the double door systems with panels of glass weighing 0 kg and synchronised opening a wide range of applications can be delivered quickly and easily. The Modular.Concept 0 is based on our tried and tested HELM and HELM 7 fittings which have been continuously developed over many years and which now have been improved by the addition of some important components (SmartStop, pelmets, synchronised operation, stainless steel finish etc.). The following list shows all available modules. Depending on the relevant application and requirements, fittings systems for timber and glass doors can be compiled from this selection. The advantages - multiple applications for timber doors, single or double door, wall, ceiling and wall pocket assembly, pelmets, projection tracks, HELM SmartStop, low headroom installation and synchronised opening and closing - modular structure: simple price calculation, quick delivery times, compact range of stock and at the same time a wide range of different applications - additional accessories can be easily added later - wide range of KWS flush and pull handles

HELM Modular.Concept 0 up to 0 kg leaf weight HELM track no. 0 - für ceiling mounting and for receiving the wall mounting bracket with drilled holes aluminium aluminium stainless steel finish anodised for door widths of 00-700 mm track lenght 00 mm 000 000 000 for door widths of 70-900 mm track lenght 700 mm 0002 0002 0007 for door widths of 90-00 mm track lenght 200 mm 000 000 000 for door widths of 0-00 mm track lenght 200 mm 000 000 0009 for door widths of 0-00 mm track lenght 00 mm 000 000 0000 stock lenght 000 mm 0000 000 000 HELM track no. 0 - for wall mounting with lateral drilled holes These tracks are used in case of wall mounting in combination with the clip-on pelmet. aluminium aluminium for door widths of 00-700 mm track lenght 00 mm 0000 00070 for door widths of 70-900 mm track lenght 700 mm 00002 000702 for door widths of 90-00 mm track lenght 200 mm 0000 00070 for door widths of 0-00 mm track lenght 200 mm 0000 00070 for door widths of 0-00 mm track lenght 00 mm 0000 00070 stock lenght 000 mm 00000 000700 HELM end caps - usable with HELM track no. 0 aluminium 2 end caps 0000 2

HELM accessories: wall mounting brackets, pocket door kids and projection tracks HELM wall mounting bracket sets Description HELM Modular.Concept 0 up to 0 kg leaf weight (no.) wall mounting bracket /0 00 (nos.) wall mounting bracket /0 00 mm 00 (nos.) wall mounting bracket /0 700 mm 00 HELM Modular.Concept 0 7 (nos.) wall mounting bracket /0 200 mm 00 (nos.) wall mounting bracket /0 200 mm 00 0 (nos.) wall mounting bracket /0 00 mm 007 HELM kits for pocket door installation This kit is for use in conjunction with the HELM 7 soffit fix track Track in timber or glass door applications Description kit contains: x universal mounting brackets (please specify according to your track length) bottom guide no. 70, latch screw universal mounting brackets no. 7 for 00 mm 007 universal mounting brackets no. 7 for 700 mm 007 7 universal mounting brackets no. 7 for 200 mm 007 universal mounting brackets no. 7 for 200 mm 007 0 universal mounting brackets no. 7 for 00 mm 0077 HELM projection track Aluminium () Supplied complete with screws and washers Interlengths and lengths from 200 mm are available as dimension lengths ( 0000) The projection track is installed with the soffit fix track no. 0 Description projection track, 00 mm long for door widths of 00-700 mm projection track, 700 mm long for door widths of 70-900 mm projection track, 200 mm long for door widths of 90-00 mm projection track, 200 mm long for door widths of 0-00 mm 0000 00070 00020 00020 2 end caps for projection track 0000 projection track, 000 mm stock length 00000 projection track, cut to length, per metre 0000 HELM projection track Aluminium (stainless steel finish anodised) Supplied complete with screws and washers Interlengths and lengths from 200 mm are available as dimension lengths ( 0000) The projection track is installed with the soffit fix track no. 0 stainless steel finish anodised Description projection track, 00 mm long for door widths of 00-700 mm projection track, 700 mm long for door widths of 70-900 mm projection track, 200 mm long for door widths of 90-00 mm projection track, 200 mm long for door widths of 0-00 mm 000270 00020 000290 00000 2 end caps for projection track 00002 projection track, 000 mm stock length 0000 projection track, cut to length, per metre 0000

HELM Modular.Concept 0 up to 0 kg leaf weight HELM mounting parts: wall mounting bracket sets, complementary sets for pocket door installation and projection tracks HELM projection track for pelmetting aluminium The projection track is used in combination with track no. 0 with holes for ceiling mounting. Description projection track, 000 mm stock length 000 projection track, cut length per metre 0099 screw connection kit includes: U adhesive discs M U hexagonal nuts M hexagonal socket head screws M x 0 mm 00 HELM projection track for pelmetting aluminium stainless steel finish anodised Description projection track, 000 mm stock length 000 projection track, cut length per metre 0099 The projection track is used in combination with track no. 0 with holes for ceiling mounting. screw connection kit includes: U adhesive discs M U hexagonal nuts M hexagonal socket head screws M x 0 mm 00 HELM spacer profile aluminium The spacer profile is used in combination with track no. 0 with holes on the side for wall mounting. Description spacer profile, 000 mm stock length, spacer profile, cut length per metre spacer profile, 000 mm stock length, stainless steel finish anodised spacer profile, cut length per metre stainless steel finish anodised 0070 00799 0090 00999 HELM end cap for projection track for timber pelmets Description 2 end caps, timber pelmets ( x 7 x 2, mm) 2 end caps, stainless steel finish anodised timber pelmets ( x 7 x 2, mm) 002 002 HELM end cap for projection track in connection with spacer profile for timber pelmets Description 2 end caps, timber pelmets ( x 7 x 2, mm) 2 end caps, stainless steel finish anodised timber pelmets ( x 7 x 2, mm) 00 00 HELM end cap for spacer profile for timber pelmets Description 2 end caps, timber pelmets (, x x 2, mm) 2 end caps, stainless steel finish anodised timber pelmets (, x x 2, mm) 0072 007 HELM end cap for spacer profile double sided for clip on pelmet in connection with HELM 7 synchronised (please see installation drawing on page ) Description 2 end caps, glas pelmets (72 x 9, x 2, mm) 2 end caps, stainless steel finish anodised glas pelmets (72 x 9, x 2, mm) 007 007

HELM Accessories for timber door applications for single leaf timber sliding doors up to 0 kg leaf weight and door thickness from 20 mm trolleys with plain bearings Description 2 trolleys no. with flange 2 door catchers no. P bottom guide no. 2 In case of double doors 2 sets are necessary. HELM Modul.Konzept 0 up to 0 kg leaf weight 00 HELM Modular.Concept 0 tested according to DIN 27:99 200.000 cycles HELM 7 use of SmartStop possible for single leaf timber sliding doors up to 0 kg leaf weight and door thickness from 20 mm trolleys with ball bearings Description 2 trolleys no. 7 with flange 2 door catchers no. P bottom guide no. 2 In case of double doors 2 sets are necessary. 007 tested according to DIN 27:99 200.000 cycles HELM 7 ME Description use of SmartStop possible for single leaf timber sliding doors with low headroom installation up to 0 kg leaf weight and door thickness from 0 mm trolleys with ball bearings 2 trolleys no. 7 2 flanges no. 7 V 2 door catchers no. P bottom guide no. 2 In case of double doors 2 sets are necessary. 0072 tested according to DIN 27:99 200.000 cycles HELM 7 Synchron use of SmartStop possible for double timber sliding doors synchronised up to 0 kg leaf weight and door thickness from 20 mm with tooth belt deflection trolleys with ball bearings tested according to DIN 27:99 200.000 cycles Description trolleys no. 7 with flange door catchers no. P 2 bottom guide no. 2 2 deflection rollers tooth belt connector timber tooth belt clamp timber tooth belt (not included in the kit) per meter calculation: tooth belt length = 2 x track length + 20 mm 0070 00000700 More accessories from page

HELM Modular.Concept 0 Accessories HELM modification set HELM modification set 7 mit SmartStop verwendbar for single leaf timber sliding doors with low headroom installation up to 0 kg leaf weight and door thickness from 0 mm suitable for the retroactive modification of the standard HELM 7 timber sets. 2 flanges no. 7 V bottom guide no. 2 In case of double doors 2 sets are necessary. cannot be combined with synchronised deflection. 007 tested according to DIN 27:99 200.000 cycles HELM accessories tested according to DIN 27:99 200.000 cycles HELM SmartStop Description SmartStop 0070 upgrade-kit for installation on one end of the track contents: SmartStop and 2 trolley no. 7 without flange 007 Damper and soft closing device suitable for max. door weight 0 kg. Suitable only for use with HELM 7 upgrade-kit for installation of both ends of the track contents: 2 SmartStop and 2 trolley no. 7 without flange 0072 Door piston Description door piston for pocket door installation piece door piston stainless steel / plastic 000 0 2, Clip-on pelmet Aluminium () The pelmet is installed on single side in side mounted or on both sides in soffit mounted installations. Matching end caps available to suit application. For wall mounting we recommend track and spacer profile no. 0 pre-drilled for side fixing. (Wall mounting brackets are not required) Description clip-on pelmet, 00 mm for door widths of 00-700 mm clip-on pelmet, 700 mm for door widths of 70-900 mm clip-on pelmet, 200 mm for door widths of 90-00 mm clip-on pelmet, 200 mm for door widths of 0-00 mm clip-on pelmet, stock length clip-on pelmet, cut length 2 end caps for the one-sided pelmet x 0 mm 00070 000702 00070 00070 000 0007 00072 2 end caps for the two-sided pelmet x mm 0007

HELM accessories Clip-on pelmet Aluminium (stainless steel finish anodised) The pelmet is installed on one side in side mounted or on both sides in soffit mounted installations. Matching end caps available to suit application. For wall mounting we recommend track and spacer profile no. 0 pre-drilled for side fixing. (Wall mounting brackets are not required) Description clip-on pelmet, 00 mm for door widths of 00-700 mm stainless steel finish anodised clip-on pelmet, 700 mm for door widths of 70-900 mm stainless steel finish anodised clip-on pelmet, 200 mm for door widths of 90-00 mm stainless steel finish anodised clip-on pelmet, 200 mm for door widths of 0-00 mm stainless steel finish anodised clip-on pelmet, stock length stainless steel finish anodised clip-on pelmet, cut length stainless steel finish anodised 2 end caps for one-sided pelmetting x 0 mm stainless steel finish anodised 2 end caps for both-sided pelmetting x mm stainless steel finish anodised 00090 000902 00090 00090 000 0009 0007 0007 0 HELM Modular.Concept 0 Accessories 2, HELM Modular.Concept 0 Clip on pelmet Aluminium silver anodised in stock lengths of 000 mm or cut to size this pelmet can be used with synchronised double doors (please see installation drawing on page ) Description clip on pelmet, 00 mm long 000770 clip on pelmet, 700 mm long 0007702 clip on pelmet, 200 mm long 000770 clip on pelmet, 200 mm long 000770 clip on pelmet, 000 mm long stock length clip on pelmet, cut to length, per metre 0007 00077 9, Description Aluminium stainless steel finish anodised in stock lengths of 000 mm or cut to size this pelmet can be used with synchronised double doors ( please see installation drawing on page ) clip on pelmet, 00 mm long 000790 clip on pelmet, 700 mm long 0007902 clip on pelmet, 200 mm long 000790 clip on pelmet, 200 mm long 000790 clip on pelmet, 000 mm long stock length clip on pelmet, cut to length, per metre 0007 00079 More accessories, flush and pull handles, from page 7

HELM 0 up to 0 kg leaf weight

HELM 0 up to 0 kg leaf weight HELM 0 up to 0 kg leaf weight Track aluminium, with drilled holes for ceiling mounting in stock lengths of 000 mm or cut to size Trolley double pair, with plain bearings Realisable options single and multiple leaf constructions mounting options: ceiling mounting wall mounting tested according to DIN 27: 99 00,000 cycles HELM 0 Further information from page 20 9

HELM 0 up to 0 kg leaf weight 2 Hardware kit track no. 0 2 trolleys no. with flange 2 door catchers no. 0 P bottom guide no. 2 with x wall mounting brackets track no. 0 2 trolleys no. with flange 2 door catchers no. 0 P bottom guide no. 2 without wall mounting bracket track no. 0, 00 mm for door widths of 00-700 mm wall mounting brackets no. 0 track no. 0, 700 mm for door widths of 70-900 mm wall mounting brackets no. 0 track no. 0, 900 mm for door widths of 90-00 mm 7 wall mounting brackets no. 0 track no. 0, 20 mm for door widths of 00-200 mm 7 wall mounting brackets no. 0 track no. 0, 2700 mm for door widths of 20-00 mm 9 wall mounting brackets no. 0 track no. 0, 00 mm for door widths of 0-00 mm wall mounting brackets no. 0 0000 000 0002 000 000 000 track no. 0, 00 mm for door widths of 00-700 mm track no. 0, 700 mm for door widths of 70-900 mm track no. 0, 900 mm for door widths of 90-00 mm track no. 0, 20 mm for door widths of 00-200 mm track no. 0, 2700 mm for door widths of 20-00 mm track no. 0, 00 mm for door widths of 0-00 mm 000002 00002 000202 00002 00002 00002 20

HELM 0 up to 0 kg leaf weight 2 Track no. 0 in stock lengths of 000 mm or cut to size, for ceiling mounting, aluminium natural finish, drilled approx. every 00 to 0 mm Wall mounting bracket no. 0 with bolt, zinc-plated stock length 0000 cut length 000 zinc-plated 0000 HELM 0 Trolley no. double pair, with flange, support screw zinc-plated plastic 000 Door catcher no. 0 P catch spring zinc-plated zinc-plated 0000 Bottom guide no. 2 plastic, white plastic 02 More accessories, flush and pull handles, from page 2

HELM 0 Technical Specifications HELM 0 Wall mounting, with wall mounting bracket no. 0 2 0, 27 7+ 2, 9, + 2 Track no. 0 stainless steel finish anodised stock length 0000 2 cut length 000 2 Attachments Wall mounting bracket no 0, zinc-plated 0000 2 Trolley no. plastic 000 2 20 0 Door catcher no. 0 P zinc-plated 0000 2 Bottom guide no. 2 plastic 02 2 20 2, HELM 0 ceiling mounting 27 Track no. 0 stainless steel finish anodised stock length 0000 2 cut length 000 2 0, 2, 7+ 20 0 20,+ Trolley no. plastic 000 2 Door catcher no. 0 P zinc-plated 0000 2 Bottom guide no. 2 plastic 02 2 2, 22

HELM 0 2

HELM and HELM 7 2

HELM and 7 HELM up to 0 kg leaf weight Track aluminium, or stainless steel finish anodised, with drilled holes for ceiling and wall mounting in stock lengths of 000 mm or cut to size Trolley double pair, with plain bearings Realisable options single and multiple leaf constructions mounting options: ceiling mounting and wall mounting clip-on pelmet tested according to DIN 27: 99 00,000 cycles HELM and HELM 7 Further information from page 2 HELM 7 up to 0 kg leaf weight Track aluminium, or stainless steel finish anodised, with drilled holes for ceiling and wall mounting in stock lengths of 000 mm or cut to size Trolley double pair, with ball bearings Realisable options single and multiple leaf constructions low headroom installation mounting options: ceiling mounting and wall mounting clip-on pelmet SmartStop telescopic fitting synchronised opening tested according to DIN 27: 99 200,000 cycles Further information from page 2 use of SmartStop possible 2

HELM up to 0 kg leaf weight 2 Hardware kit track no. 0, 2 trolleys no. with flange 2 door catchers no. P bottom guide no. 2 with x wall mounting brackets /0 track no. 0, 2 trolleys no. with flange 2 door catchers no. P bottom guide no. 2 without wall mounting brackets /0 track no. 0, natural colour, 00 mm for door widths of 00-700 mm wall mounting brackets no. 0/0 track no. 0, natural colour, 700 mm for door widths of 70-900 mm wall mounting brackets no. 0/0 track no. 0, natural colour, 200 mm for door widths of 90-00 mm 7 wall mounting brackets no. 0/0 track no. 0, natural colour, 200 mm for door widths of 0-00 mm wall mounting brackets no. 0/0 0000 000 0020 000 track no. 0, natural colour, 00 mm for door widths of 00-700 mm track no. 0, natural colour, 700 mm for door widths of 70-900 mm track no. 0, natural colour, 200 mm for door widths of 90-00 mm track no. 0, natural colour, 200 mm for door widths of 0-00 mm 000020 00020 002020 00020 2

HELM up to 0 kg leaf weight Track no. 0 in stock lengths of 000 mm or cut to size, for ceiling mounting, drilled approx. every 00 to 0 mm stock length 0000 cut length 0002 stock length 000 cut length 000 stock length stainless steel finish anodised 000 cut length stainless steel finish anodised 000 in stock lengths of 000 mm or cut to size, for ceiling mounting with drilled holes on the side stock length, drilled holes on the side 0000 cut length, drilled holes on the side 000 stock length, drilled holes on the side 000700 cut length, drilled holes on the side 00070 HELM 2 Mounting parts wall mounting bracket no. /0 with integral bolt, zinc-plated zinc-plated 00 ceiling plate no. /02 with integral bolt, zincplated zinc-plated 002 Trolley no. double pair with plastic plain bearing, roller body black, with flange, support screw zinc-plated plastic 000 Door catcher no. P zinc-plated/plastic zinc-plated/plastic 0000 Bottom guide no. 2 plastic, white plastic 02 More accessories for HELM from page 2 27

HELM Accessories Accessories for HELM 0 2, Clip-on pelmet aluminium or stainless steel finish anodised in stock lengths of 000 mm or cut to size The pelmet can be used on one side in case of wall mounting or on both sides in case of ceiling mounting. The end caps are to be picked accordingly. clip-on pelmet, stock length 000 mm clip-on pelmet, cut length 2 end caps for the one-sided pelmet x 0 mm 2 end caps for the two-sided pelmet x mm clip-on pelmet, stock length 000 mm stainless steel finish anodised clip-on pelmet, cut length stainless steel finish anodised 2 end caps for one-sided pelmetting x 0 mm stainless steel finish anodised 2 end caps for both-sided pelmetting x mm stainless steel finish anodised 000 0007 00072 0007 000 0009 0007 0007 7 HELM projection track aluminium or stainless steel finish anodised with screw set and washers The projection track is used in combination with the track no. 0 with drilled holes for ceiling mounting. 2 end caps 0000 stock length 000 mm 00000 cut length 0000 2 end caps stainless steel finish anodised 00002 stock length 000 mm stainless steel finish anodised 0000 cut length stainless steel finish anodised 0000 HELM projection track for pelmetting aluminium silver anodised The projection track is used in combination with track no. 0 with holes for ceiling mounting. projection track, 000 000 mm stock length projection track, cut length per metre 0099 screw connection kit includes: U adhesive discs M U hexagonal nuts M 00 hexagonal socket head screws M x 0 mm HELM projection track for pelmetting aluminium stainless steel finish anodised The projection track is used in combination with track no. 0 with holes for ceiling mounting. projection track, 000 mm stock length 000 projection track, cut length per metre 0099 screw connection kit includes: U adhesive discs M U hexagonal nuts M 00 hexagonal socket head screws M x 0 mm More accessories for HELM from page 29 2

HELM Accessories Accessories for HELM HELM end cap for projection track for timber pelmets x 7 x 2, mm 2 end caps 002 2 end caps, stainless steel finish anodised 002 HELM 9 HELM spacer profile aluminium The spacer profile is used in combination with track no. 0 with holes on the side for wall mounting. spacer profile, 000 mm stock length, spacer profile, cut length per metre spacer profile, 000 mm stock length, steel finish anodised spacer profile, cut length per metre stainless steel finish anodised 0070 00799 0090 00999 HELM end cap for spacer profile for timber pelmets,, x x 2, mm 2 end caps 0072 2 end caps, stainless steel finish anodised 007 HELM end cap for projection track in connection with spacer profile for timber pelmets x 7 x 2, mm 2 end caps 00 2 end caps, stainless steel finish anodised 00 Further accessories Door piston door piston for pocket door installation piece door piston stainless steel / plastic 000 More accessories, flush and pull handles, from page 29

HELM Technical Specifications HELM Wall mounting, with wall mounting bracket no. /0 2, Track no. 0 stainless steel stock length 0000 000 000 27 cut length 0002 000 000 27 +0 2 Wall mounting bracket no. /0 zinc-plated 00 27, 0, +0 Trolley no. plastic 000 27 20 0 Door catcher no. P zinc-plated/plastic 0000 27 Bottom guide no. 2 plastic 02 27 20 2 20 2, HELM Wall mounting, track with drilled holes on the side and one-sided pelmetting +0, 9, 0, 7 Track no. 0 stainless steel finish anodised stock length, drilled holes on the side 00000 000700 27 cut length, drilled holes on the side 000 00070 27 Clip on pelmet stainless steel finish anodised clip on pelmet, stock length 000 000 2 clip on pelmet, cut length 0007 0009 2 2 end caps, one-sided 00072 0007 2 20 Trolley no. 0 plastic 000 27 Door catcher no. P zinc-plated/plastic 0000 27 Bottom guide no. 2 plastic 02 27 2, 0

HELM Technical Specifications HELM Ceiling mounting, with double-sided pelmetting Track no. 0 stainless steel stock length 0000 000 000 27 cut length 0002 000 000 27 Clip on pelmet stainless steel 2x clip on pelmet, stock length 000 000 2 2x clip on pelmet, cut length 0007 0009 2 2 end caps, double-sided 0007 0007 2 +0, 0, 7 HELM Trolley no. plastic 000 27 20 0 Door catcher no. P zinc-plated/plastic 0000 27 Bottom guide no. 2 plastic 02 27 20 2, HELM Wall mounting, track with drilled holes on the side, spacer profile and one-sided pelmetting Track no. 0 stainless steel finish anodised stock length, drilled holes on the side 00000 000700 27 cut length, drilled holes on the side 000 00070 27 9 7, Clip on pelmet stainless steel finish anodised clip on pelmet, stock length 000 000 2 clip on pelmet, cut length 0007 0009 2 2 end caps, one-sided 0072 007 29 2, 0, 2 7 9 Spacer profile stainless steel finish anodised spacer profile, stock length 0070 0090 29 spacer profile, cut length 00799 00999 29 0, 20 0 Trolley no. plastic 000 27 Door catcher no. P zinc-plated/plastic 0000 27 20 Bottom guide no. 2 plastic 02 27 2,

HELM Technical Specifications HELM Wall mounting (with projection track and pelmetting), 9, Track no. 0 stainless steel finish anodised stock length 0000 000 000 27 cut length 0002 000 000 27 7, 20 0 0, 2 7 Clip on pelmet stainless steel finish anodised clip on pelmet, stock length 000 000 2 clip on pelmet, cut length 0007 0009 2 Projection track stainless steel finish anodised Projection track, stock length 000 2 Projection track, cut length 0099 2 Srew set - 00 2 2 End caps 002 002 29 Trolley no. plastic 000 27 20 Door catcher no. P zinc-plated/plastic 0000 27 2, Bottom guide no. 2 plastic 02 27 2

HELM

HELM 7 up to 0 kg leaf weight 2 Hardware kit track no. 0, 2 trolleys no. 7 with flange 2 door catchers no. P bottom guide no. 2 with x wall mounting brackets /0 track no. 0, 2 trolleys no. 7 with flange 2 door catchers no. P bottom guide no. 2 without wall mounting brackets /0 track no. 0, natural colour, 00 mm for door widths of 00-700 mm wall mounting brackets no. /0 track no. 0 natural colour, 700 mm for door widths of 70-900 mm wall mounting brackets no. /0 track no. 0 natural colour, 200 mm for door widths of 90-00 mm 7 wall mounting brackets no. /0 track no. 0 natural colour, 200 mm for door widths of 0-00 mm wall mounting brackets no. /0 track no. 0 natural colour, 00 mm for door widths of 0-00 mm 0 wall mounting brackets no. /0 track no. 0 natural colour, 700 mm for door widths of 0-900 mm 2 wall mounting brackets no. /0 00700 0070 00720 0070 0070 0070 track no. 0, natural colour, 00 mm for door widths of 00-700 mm track no. 0 natural colour, 700 mm for door widths of 70-900 mm track no. 0 natural colour, 200 mm for door widths of 90-00 mm track no. 0 natural colour, 200 mm for door widths of 0-00 mm track no. 0 natural colour, 00 mm for door widths of 0-00 mm track no. 0 natural colour, 700 mm for door widths of 0-900 mm 0070020 007020 0072020 007020 007020 007020

HELM 7 up to 0 kg leaf weight Track no. 0 in stock lengths of 000 mm or cut to size, for ceiling mounting, drilled approx. every 00-0 mm stock length 0000 cut length 0002 stock length 000 cut length 000 stock length stainless steel finish anodised 000 cut length stainless steel finish anodised 000 in stock lengths of 000 mm or cut to size, for ceiling mounting with drilled holes on the side stock length, drilled holes on the side 0000 cut length, drilled holes on the side 000 stock length, drilled holes on the side 000700 cut length, drilled holes on the side 00070 HELM 7 2 Mounting parts wall mounting bracket no. /0 with integral bolt, zinc-plated zinc-plated 00 ceiling plate no. /02 with integral bolt, zincplated zinc-plated 002 Trolley no. 7 double pair with ball bearing, roller body white, with flange, support screw zinc-plated plastic 0070 Door catcher no. P zinc-plated, plastic zinc-plated/plastic 0000 Bottom guide no. 2 plastic, white plastic 02 More accessories for HELM 7 from page

HELM 7 Accessories Accessories for HELM hardware 7 0 2, Clip-on pelmet aluminium or stainless steel finish anodised in stock lengths of 000 mm or cut to size The pelmet can be used on one side in case of wall mounting or on both sides in case of ceiling mounting. The end caps are to be picked accordingly. clip-on pelmet, stock length 000 mm clip-on pelmet, cut length 2 end caps for the one-sided pelmet x 0 mm 2 end caps for the two-sided pelmet x mm clip-on pelmet, stock length 000 mm stainless steel finish anodised clip-on pelmet, cut length stainless steel finish anodised 2 end caps for one-sided pelmetting x 0 mm stainless steel finish anodised 2 end caps for both-sided pelmetting x mm stainless steel finish anodised 000 0007 00072 0007 000 0009 0007 0007 7 HELM projection track aluminium or stainless steel finish anodised with screw set and washers The projection track is used in combination with the track no. 0 with drilled holes for ceiling mounting. 2 end caps for projection track 0000 stock length 000 mm 00000 cut length 0000 2 end caps for projection track stainless steel finish anodised 00002 stock length 000 mm stainless steel finish anodised 0000 cut length stainless steel finish anodised 0000 HELM 7 ME for single leaf timber sliding doors with low headroom installation up to 0 kg leaf weight and door thickness from 0 mm trolleys with ball bearings 2 trolleys no. 7 2 flanges no. 7 V 2 door catchers no. P bottom guide no. 2 In case of double doors 2 sets are necessary. 0072 Single components for double doors synchronised 9 Synchronised for double, timber sliding doors synchronised up to 0 kg leaf weight and door thickness from 20 mm with tooth belt deflection kit for double doors synchronised 0070 trolleys no. 7 m with guide door catchers no. P bottom guides no. 2 2 deflection rollers coupling joint for tooth belt tooth belt clamp 0 Tooth belt sold by metre, black tooth belt, sold by metre 00000700 Calculation for synchronised: tooth belt length = 2 x track length + 20 mm

HELM 7 Accessories Single components for double doors synchronised Clip on pelmet Aluminium silver anodised clip on pelmet, 00 mm long 000770 clip on pelmet, 700 mm long 0007702 in stock lengths of 000 mm or cut to size this pelmet can be used with synchronised double doors (please see installation drawing on page ) clip on pelmet, 200 mm long 000770 clip on pelmet, 200 mm long 000770 clip on pelmet, 000 mm long stock length clip on pelmet, cut to length, per metre 0007 00077 9, HELM 7 Aluminium stainless steel finish anodised clip on pelmet, 00 mm long 000790 clip on pelmet, 700 mm long 0007902 in stock lengths of 000 mm or cut to size clip on pelmet, 200 mm long 000790 this pelmet can be used with synchronised double doors (please see installation drawing on page ) clip on pelmet, 200 mm long 000790 clip on pelmet, 000 mm long stock length clip on pelmet, cut to length, per metre 0007 00079 Single components for telescopic hardware 2 Trolley no. 7 double pair with ball bearing, roller body white, with flange, support screw Mx0 zinc-plated plastic 0079 Telescopic fitting no. 7 accessory kit for leaf thickness of 0-0 mm (without tooth belt) kit for double telescopic hardware: 2 deflection rollers door driver connector coupling joint for tooth belt kit for three-leaf telescopic hardware: 2 deflection rollers 2 door drivers connector 2 deflection rollers for driver coupling joint for tooth belt door driver for deflection roller 0002 000 More accessories, for telescopic hardware, from page 7

HELM 7 Accessories Single components for telescopic hardware Tooth belt sold by metre, black Attention: In case of three-leaf installations two tooth belts are required! tooth belt, sold by metre 00000700 Calculation for telescopic: tooth belt length = 2 x leaf length + 00 mm Guide glide no. S bottom guide, plastic, suitable for bottom guide track no. 0 plastic 0 7 Guide glide no. S with mounting bracket, stainless steel L = mm or L = mm, adjustable, suitable for bottom guide track no. 0 U-Track no. 0 Aluminium, Aluminium oder stainless steel finish anodised, in stock lenght of 000 mm or cut lenght L = mm 02 L = mm 0 stock length 00 cut length 002 stock length 00 cut length 00 stock length stainless steel finish anodised 00 cut length stainless steel finish anodised 007 HELM Projection track, spacer profile and end caps HELM projection track for pelmetting aluminium silver anodised The projection track is used in combination with track no. 0 with holes for ceiling mounting. projection track, 000 000 mm stock length projection track, cut length per metre 0099 screw connection kit includes: U adhesive discs M U hexagonal nuts M 00 hexagonal socket head screws M x 0 mm HELM projection track for pelmetting aluminium stainless steel finish anodised The projection track is used in combination with track no. 0 with holes for ceiling mounting. projection track, 000 mm stock length 000 projection track, cut length per metre 0099 screw connection kit includes: U adhesive discs M U hexagonal nuts M 00 hexagonal socket head screws M x 0 mm More accessories, flush and pull handles, from page

HELM 7 Accessories Accessories for HELM HELM end cap for projection track for timber pelmets x 7 x 2, mm 2 end caps 002 2 end caps, stainless steel finish anodised 002 9 HELM spacer profile aluminium The spacer profile is used in combination with track no. 0 with holes on the side for wall mounting. spacer profile, 000 mm stock length, spacer profile, cut length per metre spacer profile, 000 mm stock length, stainless steel finish anodised spacer profile, cut length per metre stainless steel finish anodised 0070 00799 0090 00999 HELM end cap for spacer profile for timber pelmets,, x x 2, mm 2 end caps 0072 2 end caps, stainless steel finish anodised 007 HELM end cap for spacer profile for clip on pelmet 72 x 9, x 2, mm in connection with HELM 7 synchronised HELM end cap for projection track in connection with spacer profile for timber pelmets x 7 x 2, mm 2 end caps 007 2 end caps, stainless steel finish anodised 2 end caps 00 2 end caps, stainless steel finish anodised 007 00 More accessories SmartStop damper and soft closing device integrated in the track up to 0 kg leaf weight piece SmartStop 0070 upgrade kit one-sided with SmartStop and trolley 7 without guide upgrade kit one-sided with 2 SmartStops and 2 trolleys 7 without guide 007 0072 tested according to DIN 27:99 200.000 cycles Door piston door piston for pocket door installation piece door piston stainless steel / plastic 000 9

HELM 7 Technical Specifications HELM 7 Wall mounting, with wall mounting bracket no. /0 2, Track no. 0 stainless steel finish anodised stock length 0000 000 000 cut length 0002 000 000 +0 2 Wall mounting bracket no. 0/0 zinc-plated 00 0, +0 Trolley no. 7 plastic 0070 20 0 Door catcher no. P zinc-plated/plastic 0000 Bottom guide no. 2 plastic 02 20 2, HELM 7 Wall mounting, track with drilled holes on the side and one-sided pelmetting +0, 9, 2 20 0 20 7 Track no. 0 stainless steel finish anodised stock length, drilled holes on the side 00000 000700 cut length, drilled holes on the side 000 00070 Clip on pelmet stainless steel finish anodised clip on pelmet, stock length 000 000 clip on pelmet, cut length 0007 0009 2 end caps, one-sided 00072 0007 Rollapparat no. 7 plastic 0070 Door catcher no. P zinc-plated/plastic 0000 Bottom guide no. 2 plastic 02 2, 0

HELM 7 Technical Specifications HELM 7 Ceiling mounting, with pelmetting on both sides Track no. 0 stainless steel finish anodised stock length 0000 000 000 cut length 0002 000 000 Clip on pelmet stainless steel finish anodised 2x clip on pelmet, stock length 000 000 2x clip on pelmet, cut length 0007 0009 2 end caps, double-sided 0007 0007 +0, 0, 7 HELM 7 Trolley no. 7 plastic 0070 20 0 Door catcher no. P zinc-plated/plastic 0000 Bottom guide no. 2 plastic 02 20 2, HELM 7 Wall mounting, track with drilled holes on the side, spacer profile and one-sided pelmetting Track no. 0 stainless steel finish anodised stock length, drilled holes on the side 00000 000700 cut length, drilled holes on the side 000 00070 Clip on pelmet stainless steel finish anodised clip on pelmet, stock length 000 000 clip on pelmet, cut length 0007 0009 2 end caps, one-sided 0072 007 9 9 2, 7 0, 2, 7 9 Spacer profile stainless steel finish anodised spacer profile, stock length 0070 0090 9 spacer profile, cut length 00799 00999 9 0, 20 0 Trolley no. 7 plastic 0070 Door catcher no. P zinc-plated/plastic 0000 20 Bottom guide no. 2 plastic 02 2,

HELM 7 Technical Specifications HELM 7 Wall mounting (with projection track and pelmetting) 9,, Track no. 0 stainless steel finish anodised stock length 0000 000 000 cut length 0002 000 000 7, 20 0 0, 2 7 Clip on pelmet stainless steel finish anodised clip on pelmet, stock length 000 000 clip on pelmet, cut length 0007 0009 Projection track stainless steel finish anodised Projection track, stock length 000 Projection track, cut length 0099 Screw set - 00 2 End caps 002 002 9 Trolley no. 7 plastic 0070 20 Door catcher no. P zinc-plated/plastic 0000 2,,2 0 22,+, Bottom guide no. 2 plastic 02 HELM 7 ME Wall mounting (with projection track and low installation) 7 7 Track no. 0 stainless steel finish anodised stock length 0000 000 000 cut length 0002 000 000 Projection track stainless steel finish anodised Projection track, stock length 00000 0000 Projection track, cut length 0000 0000 2 End caps 0000 00002 HELM 7 ME Set 0072 optains: 2 trolleys no. 7 2 flanges no. 7 V 2 door catchers no. P bottom guide no. 2 In case of double doors 2 sets are necessary. 2, 2

HELM 7 Technical Specifications HELM 7 Synchronised, track with drilled holes on the side and one-sided pelmetting Track no. 0 stainless steel finish anodised stock length, drilled holes on the side 00000 000700 cut length, drilled holes on the side 000 00070 Clip on pelmet stainless steel finish anodised clip on pelmet, stock length 0007 0007 7 clip on pelmet, cut length 00077 00079 7 9 2,+ 72 0 +, 9, HELM 7 9 9 0 Spacer profile stainless steel finish anodised 2x spacer profile, stock length 0070 0090 9 2x spacer profile, cut length 00799 00999 9 end caps f. spacer profile, double-sided 007 007 9 HELM 7 Synchronised Set 0070 optains: trolleys no. 7 m with guide door catchers no. P bottom guides no. 2 2 deflection rollers coupling joint for tooth belt tooth belt clamp Tooth belt (sold by metre) 00000700 Calculation for synchronised: tooth belt length = 2 x track length + 20 mm 9 0,, 0 2, 20 HELM 7 Telescopic hardware 2 Track no. 0 stainless steel finish anodised stock length 0000 000 000 cut length 0002 000 000 Trolley no. 7 plastic 0079 7 2,, 9, HELM 7 Teleskopic kit for double telescopic hardware 0002 7 kit for three-leaf telescopic hardware 2 000 7 optains: 2 deflection rollers door driver connector coupling joint for tooth belt 2 optains: 2 deflection rollers 2 door drivers connector 2 deflection rollers for driver coupling joint for tooth belt door driver for deflection roller Tooth belt (sold by metre) 00000700 Calculation for telescopic: tooth belt length = 2 x leaf length + 00 mm Bottom guide no. S, 0 2 2 0 20 0 0, +2 7 plastic 0 Bottom guide no. S angle lenght = mm 02 angle lenght = mm 0 U-Track no. 0 stainless steel finish anodised stock length 00 00 00 cut length 002 00 007 2 2 2, 7

HELM up to 90 kg leaf weight

HELM up to 90 kg leaf weight HELM up to 90 kg leaf weight Track aluminium, with drilled holes for ceiling and wall mounting in stock lengths of 000 mm or cut to size Special feature enclosed track system: consisting of track, pelmet, end caps and plastic strip Trolley double roller, with ball bearings Realisable options single and multiple leaf constructions mounting options: Ceiling mounting and wall mounting synchronised opening tested according to DIN 27: 99 00,000 cycles HELM Further information from page

HELM up to 90 kg leaf weight 7 2 9 Hardware kit track no. plastic strip no. 2 pelmet no. 2 end caps no. 2 trolleys no. 2 flanges no. 2 door catchers no. P bottom guide no. track no., 00 mm for door widths of 00-00 mm track no., 2000 mm for door widths of 0-000 mm track no., 200 mm for door widths of 00-200 mm track no., 000 mm for door widths of 20-00 mm 000 002 00 00 Track no. in stock lengths of 000 mm or cut to size, drilled approx. every 200 mm, stock length 0000 cut length 000

HELM up to 90 kg leaf weight 2 Plastic strip no. plastic plastic black 0020 plastic grey 002 Pelmet no. stock length 000 aluminium, in stock lengths of 000 mm or cut to size cut length 00 End cap no. aluminium aluminium 0000 HELM Trolley no. zinc-plated/plastic, with ball bearing and support screw (M0 x 0) zinc-plated 000 Flange no. zinc-plated zinc-plated 0020 7 Door catcher no. P tin phosphate coated, catch force adjustable right 0000 left 000 Bottom guide profile no. 0 stock length 000 in stock lengths of 000 mm or cut to size, drilled approx. every 00 mm, aluminium cut length 00 9 Bottom guide no. plastic black 00 More accessories for HELM from page 7

HELM Accessories Kit for double doors synchronised 0 Synchronised accessory kit for leaf thickness of 0-2 mm kit for double doors synchronised 00700 2 x deflection roller x wire rope holder x door driver 2 x rope clamp x turnbuckle x bag gasketing, 2 m wire Accessories for HELM Bottom guide profile no. 20 K plastic, in stock lengths of 000 mm or cut to size stock length, plastic 0202 cut length, plastic 020 Bottom guide no. 2 S zero-clearance bottom guide, matches bottom guide profile no. 20 plastic 02 More accessories, flush and pull handles, from page

HELM Technical Specifications HELM, Wall or ceiling mounting Track no. stock length 0000 cut length 000 0 2 2 Plastic strip no. black 0020 7 grey 002 7 Pelmet no. stock length 000 7 cut length 00 7 0+ 7 HELM Trolley no. 2 zinc-plated 000 7 0 Flange no. zinc-plated 0020 7 2 7 Door catcher no. P zinc-plated, right 0000 7 zinc-plated, left 000 7 9 20, U-Track no. 0 stock length 000 7 cut length 00 7 9 Bottom guide no. plastic, black 00 7 HELM synchronised Wall or ceiling mounting Position to 9 even with HELM, Wall- and ceiling mounting 0 0 2 2 29 0 2 20, HELM Synchronised Set 00700 optains: 2 deflection rollers wire rope holder door driver 2 rope clamps turnbuckle bag gasketing, 2 m wire 7 0 9 9

HELM 20 and HELM 0 0

HELM 20 and HELM 0 HELM 20 up to 20 kg leaf weight Track aluminium, in stock lengths of 000 mm or cut to size, with drilled holes for ceiling mounting Trolley double pair, with ball bearings Realisable options single and multiple leaf constructions mounting options: ceiling mounting and wall mounting clip-on pelmet telescopic fitting synchronised opening Note: The design of pelmet and cover caps requires the pelmet to be longer (7 mm) than the track. HELM 20 and HELM 0 tested according to DIN 27: 99 00,000 cycles Further information from page 2 HELM 0 up to 70 kg leaf weight Track aluminium, in stock lengths of 000 mm or cut to size, with drilled holes for ceiling mounting Trolley double pair, with ball bearings Realisable options single and multiple leaf constructions mounting options: ceiling mounting and wall mounting clip-on pelmet telescopic fitting synchronised opening Note: The design of pelmet and cover caps requires the pelmet to be longer (7 mm) than the track. tested according to DIN 27: 99 00,000 cycles Further information from page 0

HELM 20 up to 20 kg leaf weight 2 Hardware kit track no. 20 2 trolleys no. 20-9 2 flanges no. 20-9 2 door catchers no. 20 P bottom guide no. 2 with x wall mounting brackets track no. 20, 00 mm for door widths of 00-00 mm wall mounting brackets no. 20-0 track no. 20, 00 mm for door widths of 700-900 mm wall mounting brackets no. 20-0 track no. 20, 00 mm for door widths of 00-000 mm 7 wall mounting brackets no. 20-0 track no. 20, 2000 mm for door widths of 900-00 mm 7 wall mounting brackets no. 20-0 track no. 20, 2200 mm for door widths of 000-200 mm wall mounting brackets no. 20-0 track no. 20, 200 mm for door widths of 200-00 mm 9 wall mounting brackets no. 20-0 20200000 202000007 20200000 202000009 2020000020 202000002 track no. 20 2 trolleys no. 20-9 2 flanges no. 20-9 2 door catchers no. 20 P bottom guide no. 2 without wall mounting bracket track no. 20, 00 mm for door widths of 00-00 mm track no. 20, 00 mm for door widths of 700-900 mm track no. 20, 00 mm for door widths of 00-000 mm track no. 20, 2000 mm for door widths of 900-00 mm track no. 20, 2200 mm for door widths of 000-200 mm track no. 20, 200 mm for door widths of 200-00 mm 2020000022 202000002 202000002 202000002 202000002 2020000027 2

HELM 20 up to 20 kg leaf weight Track no. 20 in stock lengths of 000 mm or cut to size, drilled approx. every 200 mm, stock length 2002000000 cut length 2002000000 2 Wall mounting bracket no. 20-0 aluminium, including locking screw, (fixing spacing: 00 mm) aluminium 20000000 Trolley no. 20 plastic/stainless steel, with precision ball bearing, support screw: stainless steel Mx plastic/stainless steel 20000900 HELM 20 Flange no. 20-9 stainless steel stainless steel 2007009002 Door catcher no. 20 P stainless steel/plastic, catch force adjustable plastic/stainless steel 200000002 Bottom guide no. 2 plastic, with plug plastic 020 Bottom door buffer with fixing material bottom door buffer 090 20 For heavy duty sliding installations we recommend an additional bottom door buffer. 0 More accessories for HELM 20 from page

HELM 20 Accessories 9 7 Pelmets for HELM 20 7 Adapter piece no. 20 aluminium for pelmet no. 0 W/D, every 700 mm aluminium 2000200 Pelmets no. 0 W for wall mounting, aluminium or aluminium, in mill lengths of 000 mm or cut to size stock length 0000020 cut length 0000022 stock length 0000007 cut length 0000009 9 End cap no. 0 W for wall mounting, aluminium or RAL 70 (light grey) aluminium /left 00002 aluminium /right 00002 light grey/left 0000 light grey/right 00002 Note: The design of pelmet and cover caps requires the pelmet to be longer (7 mm) than the track.

HELM 20 Accessories Pelmet no. 0 D for ceiling mounting, aluminium or aluminium, in mill lengths of 000 mm or cut to size stock length 000002 cut length 000002 stock length 000000 cut length 000000 9 End cap no. 0 D for ceiling mounting, aluminium or RAL 70 (light grey) aluminium /left 000029 aluminium /right 00000 light grey/left 000027 light grey/right 00002 Note: The design of pelmet and cover caps requires the pelmet to be longer (7 mm) than the track. HELM 20 Single components for double doors synchronised 0 Trolley no. 20 plastic/stainless steel, with precision ball bearing, support screw: stainless steel Mx Art.-Nr. plastic/stainless steel 20000900 Synchronised accessory kit for leaf thickness of 0-0 mm (without tooth belt) kit for double doors synchronised 200022022 2 deflection rollers coupling joint for tooth belt tooth belt clamp 2 Tooth belt sold by metre, black tooth belt, sold by metre 00000700 Calculation for telescopic: tooth belt length = 2 x leaf length + 00 mm More accessories for HELM 20 from page

HELM 20 Accessories Single components for telescopic hardware Trolley no. 20 plastic/stainless steel, with precision ball bearing, support screw: stainless steel Mx plastic/stainless steel 20000900 Telescopic fitting no. 20 accessory kit for leaf thickness of 0-0 mm (without tooth belt) kit for double telescopic hardware: 2 deflection rollers door driver connector coupling joint for tooth belt kit for three-leaf telescopic hardware: 2 deflection rollers 2 door drivers connector 2 deflection rollers for driver coupling joint for tooth belt door driver for deflection roller 000 000 Tooth belt sold by metre, black tooth belt, sold by metre 00000700 Calculation for synchronised: tooth belt length = 2 x track length + 20 mm Guide glide no. S bottom guide, plastic, suitable for bottom guide track no. 0 Art.-Nr. plastic 0 7 Guide glide no. S with mounting bracket, stainless-steel, suitable for bottom guide track no. 0 L = mm 02 L = mm 0 Bottom guide profile no. 0 Aluminium, Aluminium oder stainless steel finish anodised, in stock lenght of 000 mm or cut lenght stock length 00 cut length 002 stock length 00 cut length 00 stock length stainless steel finish anodised 00 cut length stainless steel finish anodised 007 More accessories for HELM 20 from page 7

HELM 20 Accessories Accessories for HELM 20 Bottom guide profile no. 20 K plastic, in stock lenght of 000 mm or cut lenght stock lenght, plastic 0202 cut lenght, plastic 020 Guide glide no. 2 S bottom guide, plastic, suitable for bottom guide track no. 20 plastic 02 HELM 20 More accessories, flush and pull handles, from page 7

HELM 20 Technical Specifications HELM 20 Wall mounting, with pelmetting 2 2, 7 Track no. 20 stock length 2002000000 cut length 2002000000 2 Wall mounting bracket no. 20/0 zinc-plated 20000000 0 Trolley no. 20 plastic/stainless steel 20000900 22+0 2 0, 2 Flange no. 20-9 stainless steel 2007009002 Door catcher no. 20 P plastic/stainless steel 200000002 0 Bottom guide no. 2 plastic 020 7 Adapter piece no. 20 2000200 Pelmet no. 0 W stock length 0000020 0000007 cut length 0000022 0000009 9 End cap no. 0 W light grey left 00002 0000 right 00002 00002 HELM 20 Ceiling mounting, with pelmetting on both sides 7, Track no. 20 stock length 2002000000 cut length 2002000000 7 7 Trolley no. 20 plastic/stainless steel 20000900 Flange no. 20-9 stainless steel 2007009002 22+0 0, 9 Door catcher no. 20 P plastic/stainless steel 200000002 2 Bottom guide no. 2 0 7 plastic 020 Adapter piece no. 20 2000200 9 Pelmet no. 0 D stock length 000002 000000 cut length 000002 000000 End cap no. 0 D light grey left 000029 000027 right 00000 00002

HELM 20 Technical Specifications HELM 20 Synchronised 0 Track no. 20 stock length 2002000000 cut length 2002000000 Trolley no. 20 0 plastic/stainless steel 20000900 Flange no. 20-9 stainless steel 2007009002 Door catcher no. 20 P plastic/stainless steel 200000002 Bottom guide no. 2 plastic 020 HELM 7 Synchronised kit for double doors synchronised 200022022 0 2 ~,2 ~2 ~2 0 0+7 HELM 20 2 2 deflection rollers coupling joint for tooth belt tooth belt clamp Tooth belt (sold by metre) 00000700 Calculation for syncronised: tooth belt length = 2 x track length + 20 mm 2, HELM 20 Telescopic Track no. 20 stock length 2002000000 cut length 2002000000 ~ 0 90 Trolley no. 20 plastic/stainless steel 20000900 ~ Flange no. 20-9 stainless steel 2007009002 HELM 20 Telescopic kit for double telescopic hardware 000 kit for three-leaf telescopic hardware 2 000 2 optains: 0, 9+2 7 optains: 2 deflection rollers door driver connector coupling joint for tooth belt 2 deflection rollers 2 door drivers connector 2 deflection rollers for driver coupling joint for tooth belt door driver for deflection roller Tooth belt (sold by metre) 00000700 Calculation for telescopic: tooth belt length = 2 x leaf length + 00 mm Bottom guide no. S plastic 0 Bottom guide no. S angle lenght = mm 02 angle lenght = mm 0 2 ~ 2 0 0 0 2 7 U-Track no. 0 stainless steel finish anodised stock length 00 00 00 cut length 002 00 007 9

HELM 0 up to 70 kg leaf weight 2 Hardware kit 2 trolleys no. 0-9 2 flanges no. 0-9 2 door catchers no. 0 P bottom guide no. 02000000 Track no. 0 aluminium in stock lengths of 000 mm or cut to size, drilled approx. every 200 mm (fixing spacing: 00 mm) stock length 002000000 cut length 002000000 track no. 0, 700 mm for door widths of 70-900 mm track no. 0, 200 mm for door widths of 90-000 mm 00200000 00200000 track no. 0, 200 mm for door widths of 00-00 mm track no. 0, 000 mm for door widths of 0-00 mm track no. 0, 00 mm for door widths of 0-700 mm 00200000 00200000 002000007 0

HELM 0 up to 70 kg leaf weight Track connector no. 0-0 aluminium Attention: For one track connection 2 pieces track connectors are required. aluminium 0000000 2 Mounting parts wall mounting bracket no. 0-0, aluminium casting material, with stainless steel screws, nut and serrated lock washers (fixing spacing: 00 mm) ceiling plate no. 0-02 aluminium casting material, with stainless steel screws, nut and serrated lock washers (fixing spacing: 00 mm) piece aluminium 0000000 7 pieces aluminium 00000002 piece aluminium 00000200 7 pieces aluminium 000002002 HELM 0 Trolley no. 0 plastic/stainless steel, with precision ball bearing, support screw: stainless steel M0x plastic/stainless steel 0000900 Flange no. 0-9 stainless steel stainless steel 00700900 Door catcher no. 0 P plastic/stainless steel, catch force adjustable plastic/stainless steel 00000002 Bottom guide no. plastic, with plug plastic 00 Bottom door buffer with fixing material bottom door buffer 090 20 For heavy duty sliding installations we recommend an additional bottom door buffer. 0 More accessories for HELM 0 from page 2

HELM 0 up to 70 kg leaf weight 9 7 Track and pelmets for HELM 0 7 Track no. 0 B aluminium in stock lengths of 000 mm or cut to size, drilled approx. every 200 mm (fixing spacing: 000 mm) stock length 002000200 cut length 002000200 Track connector no. 0-0 aluminium Attention: For one track connection 2 pieces of track connectors are required. aluminium 0000000 2

HELM 0 up to 70 kg leaf weight Pelmet no. 0 W for wall mounting, aluminium or aluminium, in stock lengths of 000 mm or cut to size cut to size stock length 0000020 cut length 0000022 stock length 0000007 cut length 0000009 9 End cap no. 0 W for wall mounting, aluminium or RAL 70 (light grey) aluminium /left 00002 aluminium /right 00002 light grey/left 0000 light grey/right 00002 Pelmet no. 0 D for ceiling mounting, aluminium or aluminium, in stock lengths of 000 mm or cut to size stock length 000002 cut length 000002 stock length 000000 cut length 000000 HELM 0 9 End cap no. 0 D for ceiling mounting, aluminium or RAL 70 (light grey) aluminium /left 000029 aluminium /right 00000 light grey/left 000027 light grey/right 00002 Note: The design of pelmet and cover caps requires the pelmet to be longer (7 mm) than the track. Single components for double doors synchronised 0 Synchronised accessory kit for leaf thickness of 0-0 mm (without tooth belt) kit for double doors synchronised 00022022 2 deflection rollers coupling joint for tooth belt tooth belt clamp Tooth belt sold by metre, black tooth belt, sold by metre 00000700 Calculation for synchronised: tooth belt length = 2 x track length + 20 mm More accessories for HELM 0 from page

HELM 0 Accessories Single components for telescopic hardware 2 Telescopic fitting no. 0 accessory kit for leaf thickness of 0-0 mm (without tooth belt) kit for double telescopic hardware: 2 deflection rollers door driver connector coupling joint for tooth belt 000 kit for three-leaf telescopic hardware: 2 deflection rollers door drives connector 2 deflection rollers for driver 2 coupling joint for tooth belt 0007 Tooth belt sold by metre, black Attention: In case of three-leaf installations two tooth belts are required! tooth belt, sold by metre 00000700 Calculation for telescopic: tooth belt length = 2 x leaf length + 00 mm Guide glide no. S bottom guide, plastic, suitable for bottom guide track no. 0 Art.-Nr. plastic 0 Guide glide no. S with mounting bracket, stainless-steel, suitable for bottom guide track no. 0 L = mm 02 L = mm 0 Bottom guide profile no. 0 Aluminium, Aluminium oder stainless steel finish anodised, in stock lenght of 000 mm or cut lenght stock length 00 cut length 002 stock length 00 cut length 00 stock length stainless steel finish anodised 00 cut length stainless steel finish anodised 007

HELM 0 up to 70 kg leaf weight Accessories for HELM 0 Bottom guide profile no. 0 Aluminium, Aluminium or stainless steel finish anodised, in stock lenght of 000 mm or cut lenght stock length 00 cut length 002 stock length 00 cut length 00 stock length stainless steel finish anodised 00 cut length stainless steel finish anodised 007 Guide glide no. S with mounting bracket, stainless-steel, suitable for bottom guide track no. 0 plastic 0 HELM 0 More accessories, flush and pull handles, from page

HELM 0 Technical Specifications HELM 0 Wall mounting, with pelmetting 2, 7 Track no. 0 2 stock length 002000200 2 cut length 002000200 2 2 Wall mounting bracket no. 0/0 7 zinc-plated 0000000 Trolley no. 0 2 plastic/stainless steel 0000900 0 +2, Flange no. 0-9 stainless steel 00700900 Door catcher no. 0 P 0 plastic/stainless steel 00000002 0 Bottom guide no. plastic 00 Pelmet no. 0 W 9, 9, 9 stock length 0000020 0000007 cut length 0000022 0000009 End cap no. 0 W light grey left 00002 0000 right 00002 00002 HELM 0 Ceiling mounting, with pelmetting 7,, 7 Track no. 0 stock length 002000200 2 cut length 002000200 2 Trolley no. 0 plastic/stainless steel 0000900 Flange no. 0-9 stainless steel 007009002 0 +2, 9 Door catcher no. 0 P plastic/stainless steel 00000002 Bottom guide no. 0 plastic 00 Pelmet no. 0 D 0 stock length 000002 000000 cut length 000002 000000 9 End cap no. 0 D light grey left 000029 000027 right 00000 00002 9, 9,

HELM 0 Technical Specifications HELM 0 Synchronised Track no. 0 stock length 002000200 2 cut length 002000200 2 0 Trolley no. 0 plastic/stainless steel 0000900 Flange no. 0-9 stainless steel 00700900 Door catcher no. 0 P plastic/stainless steel 00000002 Bottom guide no. plastic 00 HELM 0 Synchronised kit for double doors synchronised 00022022 0 ~2 ~2 ~, 0 0+7 HELM 0 optains: 2 deflection rollers coupling joint for tooth belt tooth belt clamp Tooth belt (sold by metre) 00000700 Calculation for syncronised: tooth belt length = 2 x track length + 20 mm 9, 9, HELM 0 Telescopic Track no. 0 stock length 002000200 2 cut length 002000200 2 Trolley no. 0 plastic/stainless steel 0000900 Flange no. 0-9 stainless steel 007009002 2 HELM 0 Telescopic kit for double telescopic hardware 000 kit for three-leaf telescopic hardware 2 0007 optains: 2 deflection rollers door driver connector coupling joint for tooth belt 2 optains: 2 deflection rollers 2 door drivers connector 2 deflection rollers for driver coupling joint for tooth belt door driver for deflection roller Tooth belt (sold by metre) 00000700 Calculation for telescopic: tooth belt length = 2 x leaf length + 00 mm Bottom guide no. S plastic 0 Bottom guide no. S angle lenght = mm 02 angle lenght = mm 0 2 2,, 00, 9 20, 0 0 0 0 2 9+2 U-Track no. 0 stainless steel stock length 00 00 00 cut length 002 00 007 7

Hardware for Sliding Doors (Timber) Flush and Pull Handles

Hardware for Sliding Doors (Timber) Flush and Pull Handles KWS Flush Handles KWS 2.. Ø mm sliding door flush handle for doors - 2 mm more door thicknesses from 2 mm on request aluminium machined according to E KWS silver-anodised 2. KWS 2 nickel silver-anodised 2.2 stainless steel brushed 2.2 polished 2. Flush and Pull Handles KWS Pull Handles KWS 70.. as a pair for two-sided operation and as piece for one-sided operation For more finishes and the relevant fixing material please request the brochure Pull Handles and Accessories, TEK_00 stainless steel brushed 70.2 D L H Ø 2 from 200 7 KWS 79.. as a pair for two-sided operation and as piece for one-sided operation For more finishes and the relevant fixing material please request the brochure "Pull Handles and Accessories, TEK_00" stainless steel brushed 79.2 D H TL Supports Ø 0 0 from 200 Ø 2 TL 9

Hardware for Sliding Doors (Timber) Flush and Pull Handles TL KWS 2.. handle bar of stainless steel 0 x 0 x 2 mm handle supports of aluminium, stainless steel finish anodised as a pair for two-sided operationand as piece for one-sided operation For more finishes and the relevant fixing material please request the brochure "Pull Handles and Accessories - TEK_00". stainless steel brushed 2.2 TL L H 00 00 0 00 00 0 TL KWS 7.. handle bar of stainless steel 0 x 0 mm handle supports of aluminium, stainless steel finish anodised as a pair for two-sided operation and as piece for one-sided operation For more finishes and the relevant fixing material please request the brochure "Pull Handles and Accessories - TEK_00". stainless steel brushed 7.2 TL L H 00 00 0 00 00 0 70

Hardware for Sliding Doors (Timber) Flush and Pull Handles KWS 20.. 0 x 0 tube L = 200 mm or cut stainless steel brushed 20.2 KWS 702.. for 0 x 0 x 2 mm tube modular support KS-0 for concealed fixing of aluminium, stainless steel finish anodised aluminium machined according to E stainless steel finish anodised 702. Flush and Pull Handles KWS 70.. for 0 x 0 x 2 mm tube modular support KS-0 for concealed fixing of aluminium, stainless steel finish anodised aluminium machined according to E stainless steel finish anodised 70. We are pleased to send you further information regarding the KWS range on request. 7

Hardware for Sliding Doors (Timber) Technical Specifications Installation types Single leaf installation Two leaves run in one track profile and can: be moved independently of each other be moved simultaneously in opposite directions (synchronised) Two leaves run in two track profiles. type : The front leaf pulls the rear leaf into the desired position by means of a clamp provided by the customer. type 2: The front leaf pulls the rear leaf into the desired position by means of telescopic deflection. Three-leaf installation (two plus one). Three leaves operate in two track profiles. type : The front leaf pulls the rear leaf into the desired position by means of a clamp provided by the customer. type 2: The front leaf pulls the rear leaf into the desired position by means of telescopic deflection. The leaves are moved independently of each other. Three leaves run in three track profiles. type : The front leaf pulls the rear leaves into the desired position by means of a clamp provided by the customer. type 2: The front leaf pulls the rear leaves into the desired position by means of telescopic deflection. Four-leaf installation (two plus two). Four leaves run in two track profiles. type : The front leaf pulls the rear leaf into the desired position by means of a clamp provided by the customer. type 2: The front leaf pulls the rear leaf into the desired position by means of telescopic deflection. The leaves can be moved independently of each other. The leaves can be moved simultaneously in opposite directions. 72

Technical Specifications 7

Hardware for Sliding Doors (Timber) Sample of Request for Proposal Sample of Request for Proposal sets HELM 7 Installation type: single leaf installation (see p. 72 ) Leaf width: 000 mm Leaf thickness: 0 mm Leaf weight 0 kg Material: timber Track mounting: Type: Special equipment: Bottom guide: Accessories: by projection track, low headroom installation track and projection track in stainless steel effect damper and soft closing device SmartStop, both sides bottom guide profile 20 K with bottom guide 2 S flush handle 2.2 stainless steel, brushed 7

Hardware for Sliding Doors (Timber) Enquiry Form Woelm GmbH I Hasselbecker Str. 2- I D - 279 Heiligenhaus I Tel.: + 9 (0) 20 - - 0 I Fax: + 9 (0) 20 - - 2 Required information for timber sliding doors Company Telephone Name Fax Street Postcode/city E-mail Contact person Supply exclusively through specialised trade. Please indicate your specialist dealer if appropriate: Order Enquiry Number of required installations piece HELM sliding hardware no. Number of leaves Installation type (see page 72) Leaf widths mm Leaf thickness Leaf weight kg Appendix Straight slide installations Operation synchronised telescopic 2-leaf telescopic -leaf bottom guide bottom guide profile no. 20 K : 020.2 + 020. bottom guide profile no. 20 : 020.0 + 020. bottom guide profile no. 0 : 00. + 00.2 + 00. + 00.7 bottom guide no. 2 : 020 bottom guide no. 2 S : 02 bottom guide no. : 0 bottom guide no. S : 0 track mounting wall mounting bracket ceiling plate (only for HELM, 7, 0 direct wall mounting direct ceiling mounting projection track pelmets not required required (aluminium, aluminium or stainless steel finish anodised) Flush / pull handles sliding door flush handle no. 2 pull handle no. 70 pull handle no. 79 pull handle no. 7 : : : : 7

HELM Range TEH_0 TEH_02H TEH_02G TEH_02D TEH_0 TEH_09 TEH_ TEH_2 TEH_0 Hardware for Sliding Wardrobe Doors Hardware for Sliding Doors (Timber) Hardware for Sliding Doors (Glass) Design Hardware for Sliding Doors (Timber and Glass) Hardware for Sliding Gates Hardware for Gateway Gates Hardware for Curtains and Tarpaulins Safety Equipment against Falls from a Height (PSE) Hardware for Sliding Shutters TEH_0 TEH_02H TEH_02G TEH_02D TEH_0 TEH_09 TEH_ TEH_2 TEH_0 KWS Range TEK_002 Door Holders and Door Stops TEK_00 Pull Handles, Door Handles and Accessories TEK_00 Flush Handles and Locks TEK_007 Hardware for Handrails, Floor Rails, Coat Racks and Toilet Partition Walls TEK_002 TEK_00 TEK_00 TEK_007 The technical specifications are up-to-date. We reserve the right to make modifications with regard to design and styling which serve the purpose of technical improvement. We appreciate your understanding that we assume no liability for any typing errors or any other errors. The reproduction of this document, in extracts or complete, is not permitted without our express written permission. This catalogue supersedes all previous catalogues. Woelm GmbH Hasselbecker Str. 2- D - 279 Heiligenhaus Phone: + 9 (0) 20 - - 0 Telefax: + 9 (0) 20 - - 2 www.helmkws.de contact@woelm.de Woelm Austria GmbH Seewalchen a A - 20 Seekirchen Phone: + (0) 2 2-2 02 Telefax: + (0) 2 2-9 9 www.helmkws.at contact@woelm.co.at