New Sliding Door Spec.

New Sliding Door Spec.

Sliding Doors Sliding doors available in Two, Three and Four door runs 3 Panel Full colour Panel or Etched mirror Contemporary split 5 Panel The image above shows the four different sliding doors panel configurations that are available. The track and sliding door metal frame colour is available in a silver or matt black finish As standard the sliding doors will include: 2, 3 or 4 equal sized sliding doors and track (See important notes) 2, 3 or 4 stock carcase robes 595mm deep inc backs 1 x Full width 100mm front frame (see important notes) A third track and guide on all angled doors Any combination of MFC and glass panels as detailed above (see important notes)

It is important to note: 1. Door sizes cannot be mixed. 2. 600,800, 900,1000 and 1100mm wide 3. If customer chooses 1100mm wide doors, it must be a 500 and a 600 wide carcase robe behind them. If customer insists it has to be 1100 wide it has to be front frame, IF THEY INSIST CARCASE WE CAN CUT DOWN A 1200mm CENTER PACK, YOU MUST CHARGE EXTRA FOR THE FITTER AND SALES MUST CHARGE FOR A 1200mm ROBE. 4. If the 100mm MFC frame is over 2700mm wide it will have the sliding door track and MFC frame jointed in the middle. 5. Where any MFC frame is jointed in the middle, no guarantee can be made that any wood grain finish will match at the joint 6. All panel colours must be clearly stated and specified as glass or MFC 7. Internal colour is Beech only 8. Any sliding door panel that has an angled cut can only be supplied in MFC and NOT GLASS 9. The minimum width that must be left at the top of any angled door is 200mm 10. The minimum height that must be left below the angle of any sliding door is 900 mm from the floor 11. Due to the height of the third track that is fitted behind any angled sliding door, there must be no internal drawer fitments fitted 12. If one sliding door is angled then a three door run must be used 13. If two sliding doors are angled the a four door run must be used 14. The door configuration of a four door sliding run, that has outer angled doors must have alternate doors fitted on the track as shown in the image below 15. Where an etched mirror door is supplied, the etching width will be 600 mm wide regardless of actual door width Floor plan showing sliding door configuration when angled doors are used. Doors must be fitted alternate on front and rear tracks

DOOR RANGE SLIDING WARDROBES DOOR STYLE DOORS ARE IN AN ALUMINIUM OR MATT BLACK FLAME. DOOR COLOUR AVAILABLE WALNUT PUTTY NOCINO METALIC SILVER BEECH TANGERINE MAPLE SCARLET LIMED OAK PLUM DÉCOR CREAM MULBERRY SOFT WHITE PASTEL GREEN FROSTED GLASS LIME ZEST WHITE GLASS SKY BLUE BLACK GLASS DARK BLUE MID-SHEEN CREAM MIRROR MID-SHEEN BLACK CHOCOLATE MID-SHEEN WHITE CAPPUCCINO ETCHED MIRROR WE CANNOT DO THE PANELS WITHIN THE DOORS IN ZEBRANO. GLASS EXTERNAL CABINET COLOUR BEECH MAPLE LIMED OAK, WALNUT NOCINO MID-SHEEN WHITE MID-SHEEN CREAM ZEBRANO DÉCOR CREAM SOFT WHITE INTERNAL FRAME COLOUR FEATURE DOORS PLINTHS / SKIRTING CORNICE TOPS COMMENTS BEECH ONLY AS ABOVE SQUARE EDGED MFC BULLNOSE, MODERN or FLAT. IF FRAME IS ZEBRANO OR MID-SHEEN, ONLY 18mm CANOPY AVAILABLE. NOT AVAILABLE 1) ALL ADDITIONAL CABINETS TO BE CALLED OFF AS PER EXISTING RANGES 2) CAN BE ANGLED ON A FRAME SYSTEM ONLY 3) CAN BE REDUCED IN HEIGHT (100mm increments, minimum is 1800mm door on a 1903mm frame) ON A FRAME SYSTEM ONLY, OR CARCASE CAN BE REDUCED IN HEIGHT AT AN EXTRA COST FOR THE FITTER. 4) CAN BE INCREASED IN HEIGHT (100mm increments, maximum is A 2400mm door on a 2503mm frame) ON A FRAME SYSTEM ONLY AVAILABLE IN 600,800, 900,1000 OR 1100 DOORS ONLY. PLEASE CHECK THE SLIDING DOORS CAN GO UP THE CUSTOMERS STAIRS!!!!

SLIDING DOOR SYSTEM QUICK REFERENCE GUIDE SIZES AVAILABLE: - 600,800, 900, 1000 & 1100 ONLY 2 DOOR CONSISTS OF 2 X STOCK 600,800, 900 or 1000 WIDE WARDROBES 3 DOOR CONSISTS OF 3 X STOCK 600,800, 900 or 1000 WIDE WARDROBES 4 DOOR CONSISTS OF 4 X STOCK 600,800, 900 OR 1000 WIDE WARDROBES 1100 WIDE DOORS MUST HAVE A 500 AND A 600 WARDROBE BEHIND THEM. (IF CUSTOMER DOESN T WANT THIS IT HAS TO BE AN 1100 FRONT FRAME, OR WE CAN CUT DOWN A 1200MM CENTER PACK BUT YOU MUST CHARGE EXTRA ON THE FIT SHEET AND CUSTOMER MUST BE CHARGED FOR A 1200 ROBE) THE SYSTEM CONSISTS OF:- 2, 3 or 4 STOCK CARCASE ROBES 595 DEEP INC BACKS 1 X FULL WIDTH 100mm FRONT FRAME, IF FRAME IS BIGGER THAN 2780mm IT WILL HAVE A JOINT IN THE TOP AND BOTTOM. 2, 3 or 4 EQUAL SIZED SLIDING DOORS EACH MADE UP WITH 1, 3 or 5 PANELS 595 DEEP ROBES + 100 FRONT FRAME = OVERALL DEPTH 695mm CARCASE ROBES ONLY AVAILABLE 2203 H SLIDING DOORS CAN BE ANGLED, INCREASED OR DECREASED IN HEIGHT IN 100MM INCREMENTS. MAXIMUM HEIGHT 2503mm FRAME/2400mm DOOR MINIMUM HEIGHT 1903mm FRAME/1800mm DOOR