hore nd Offsh arine an ms for Ma geration System & Refrig HV VAC & PRODUCT CATALOGUE CENTRIFUGAL FANS
! "# $ % & " ' (! ) * +,+( -../01..2
PRODUCT CATALOGUE 73-16 CENTRIFUGAL FANS CONTENT PAGE 1. CENTRIFUGAL FANS WITH STANDARD MOTOR TN, HN...4 2. MARINE CENTRIFUGAL FANS WPM...11 3. MARINE ALUMINUM CENTRIFUGAL FANS WPMA...17 4. MARINE CENTRIFUGAL RECIRCULATION FANS WPM/R...20 5. MARINE PORTABLE CENTRIFUGAL FANS WPMA/P-140...21
CENTRIFUGAL FANS WITH STANDARD MOTOR TN, HN 73-16-100 DESCRIPTION TN/HN direct driven fans are designed for light industrial applications. They are used to convey clean or lightly polluted air and non-aggressive gases. The fan casings are not gas tight. The permissible temperature range of the conveyed medium is -30 o C to +60 o C. The housing of the fans is made of galvanized sheet steel. Painted or powder coated casings are available. The TN type unit has forwardcurved impellers which are made of galvanized steel, designed for high circumferential speed. The inlet cones are manufactured from galvanised steel or glass fibre reinforced polyamide. The HN type unit has backward-curved impellers are made of seawater proof aluminium. Their low mass moment of inertia allows reducing motor sizes. The inlet cones are made of galvanised steel. All fan impellers are statically and dynamically balanced in two plains to quality level G 2.5 (DIN ISO 1940). All fans are also equipped with standard IEC-motors of flange or foot type. Protection class is IP55 and isolation class F. The permissible ambient temperature range is -20 o C to 40 o C. Up to motor size 100, voltage controllable motors are available. All units can be executed as fitted type fans with a B5 flange motor (TNF/HNF). The side plates and the scroll plate are joined together by a standing seam. The mounting feet are screwed to the fan casing. The discharge orientation can therefore easily changed in step of 90 o. The TNQ/HNQ type fans feature a square side plate that allows the installation of a B3 foot motor. The side plates and scroll are riveted. All presented data accords to 50Hz supply. DIMENSIONS Type TNF-2 HNF-2 TNF-4 HNF-4 TNF-6 HNF-6 Size Dimensions [mm] A B C D F H I J d max 160 306 154 158 159 128 359 156 129 240 180 337 467 172 172 143 394 168 141 269 160 306 154 158 159 128 359 156 129 210 180 337 467 172 172 143 394 168 141 210 200 367 179 196 189 157 433 181 154 210 225 405 195 212 205 176 476 196 169 269 250 442 211 235 218 194 515 216 187 326 250 442 211 235 218 194 515 216 187 210 280 487 229 262 243 216 573 236 212 269
CENTRIFUGAL FANS WITH STANDARD MOTOR TN, HN 73-16-100 Type TNQ-2 HNQ-2 TNQ-4 HNQ-4 TNQ-6 HNQ-6 Size Dimensions [mm] A B C D E F G H 200 75 233 85 180 263 233 75 66 225 100 220 82 205 280 220 138 170 250 116 220 97 205 300 220 163 199 200 75 233 85 180 263 233 75 166 225 100 220 82 205 280 220 138 170 250 116 220 97 205 300 220 163 199 280 50 400 105 280 321 440 84 219 315 52 440 110 230 365 440 120 256 355 80 440 137 255 392 440 159 288 400 125 417 151 305 416 417 125 299 450 111 503 146 305 503 606 111 333 250 116 220 97 205 300 220 163 199 280 50 400 105 280 321 440 84 219 315 52 440 110 230 365 440 120 256 355 80 440 137 255 392 440 159 288 400 125 417 151 305 416 417 125 299 450 111 503 146 305 503 606 111 333 500 152 496 177 305 537 614 152 387 560 169 554 216 305 591 692 169 443 Discharge orientation viewed from drive side
CENTRIFUGAL FANS WITH STANDARD MOTOR TN, HN 73-16-100 TECHNICAL SPECIFICATION Relative octave sound power level, A weighted HN db(a) L w A 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz 2-pol outlet 0-23 -15-7 -2-3 -7-10 inlet -3-19 -14-10 -9-7 -8-14 4-pol outlet 0-22 -13-5 -4-7 -8-15 inlet -3-21 -16-12 -8-8 -12-18 HN -2; 50Hz
CENTRIFUGAL FANS WITH STANDARD MOTOR TN, HN 73-16-100 HN -4; 50Hz
CENTRIFUGAL FANS WITH STANDARD MOTOR TN, HN 73-16-100 Relative octave sound power level, A weighted TN db(a) L w A 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz 2-pol outlet 0-23 -11-2 -5-6 -12-22 inlet -3-18 -12-7 -5-9 -11-20 4-pol outlet 0-18 -8-8 -7-12 -20-26 inlet -3-19 -13-8 -10-11 -18-25 6-pol outlet 0-16 -10-10 -9-17 -23-30 inlet -3-19 -13-10 -12-14 -23-31 TN -2; 50Hz
CENTRIFUGAL FANS WITH STANDARD MOTOR TN, HN 73-16-100 TN -4; 50Hz
CENTRIFUGAL FANS WITH STANDARD MOTOR TN, HN 73-16-100 TN -6; 50Hz
MARINE CENTRIFUGAL FANS WPM 73-16-200 DESCRIPTION Marine centrifugal fans WPM are destined for operation in the ventilation systems of seagoing ships with unrestricted cruising area as well as offshore objects. They may be used as exhaust or supply fans and be installed inside the compartments. WPM fans are of compact, sturdy construction and equipped with high efficient impeller with backward-curved blades. Working parameters of fans are shown on performance curves P t =f(v) with respect to inert gas of specific density =1,2kg/m 3 and temperature t= 20 o C, where: P t (Pa) fan total pressure, V (m 3 /s) air displacement. Allowable tolerances of working parameters of fans (air displacement, pressure, power consumption and efficiency) are in accordance with standard PN-77/M-43021. Temperature of conveyed medium should not exceed +45 o C, dust contents 0,3g/m 3.Surface treatment hot-dip galvanized. Housing is made of carbon steel. Impeller is made of sea water resistant aluminum alloys. Electric motor is executed as marine, induction, squirrel-cage and three-phase. It is suitable for 50 or 60Hz electric installation. Smaller motors are coupled directly to fan casings, larger fitted on supporting pedestal. Fans in explosion-proof execution are fitted with brass lining on inner surface of housing in way of impeller. On request fans may be supplied with flanged flexible connections for inlet and/or outlet and set of shock absorbers. MARKING Example: WPM type fan of nominal diameter DN=160, with impeller speed 3500 min -1, with RD0 position: WPM 160/4-RD0 TECHNICAL SPECIFICATION & DIMENSIONS Impeller speed: 1 1450 min -1 (50 Hz) 2 2900 min -1 (50 Hz) 3 1750 min -1 (60 Hz) 4 3500 min -1 (60 Hz) Discharge orientation viewed from drive side
MARINE CENTRIFUGAL FANS WPM 73-16-200 Fan type Nominal airflow Total nominal Impeller speed Maximum noise [m 3 /s] pressure [Pa] [1/min] level [db(a)] 160/1 0.085 145 1340 71 160A/1 0.12 185 1340 73 200/1 0.17 230 1400 78 200A/1 0.24 290 1400 79 250/1 0.34 360 1400 84 250A/1 0.49 450 1420 85 315/1 0.69 565 1420 92 315A/1 0.97 705 1420 93 400/1 1.37 880 1430 98 400A/1 1.92 1100 1435 99 450A/1 2.65 1350 1450 104 125A/2 0.11 435 2800 84 160/2 0.16 540 2800 87 160A/2 0.23 690 2820 90 200/2 0.33 870 2820 94 200A/2 0.47 1120 2820 96 250/2 0.66 1380 2860 99 250A/2 0.95 1750 2910 101 315/2 1.32 2170 2910 105 160/3 0.10 210 1610 73 160A/3 0.14 265 1610 76 200/3 0.20 335 1700 82 200A/3 0.29 415 1700 84 250/3 0.41 525 1720 88 250A/3 0.58 660 1720 89 315/3 0.83 830 1710 96 315A/3 1.18 1040 1720 97 400/3 1.65 1310 1720 103 400A/3 2.38 1660 1755 104 125A/4 0.146 675 3400 88 160/4 0.21 850 3400 90 160A/4 0.29 1060 3400 92 200/4 0.41 1320 3400 98 200A/4 0.58 1660 3450 100 250/4 0.79 2050 3500 104 Supply [V/Hz] 3x380/50 3x440/60
MARINE CENTRIFUGAL FANS WPM 73-16-200
MARINE CENTRIFUGAL FANS WPM 73-16-200 Dimensions [mm] Fan type 125A 160 160A 200 200A 250 250A 315 315A 400 400A 450A DN 125 160 200 250 315 400 450 A 170 216 270 335 420 535 600 A 1 125 160 200 245 310 390 435 B 210 262 327 402 505 632 703 C 90 100 110 120 130 150 165 190 205 240 260 295 D 3 - - - 320 330 420 450 520 465 490 580 650 D 5 230 275 285 300 310 320 350 390 420 500 - - E 117 150 187 234 295 374 420 H 2 150 190 240 295 370 470 530 I 160 200 250 315 400 500 560 J 164 180 196 214 234 266 290 308 338 382 412 468 K - - - 112 123 133 146 158 173 190 210 234 L - - - 110 120 130 143 150 165 185 200 230 M - - 150 200 200 250 280 N - - 250 315 400 500 560 ØD 12 12 12 15 15 15 15 a 184 224 280 336 420 516 566 b 166 206 260 316 396 492 542 c 140 180 225 280 355 450 500 e 170 172 186 216 236 256 282 316 336 382 422 468 f 152 154 169 196 216 236 262 292 322 358 398 444 g 120 125 140 160 180 200 225 250 280 315 355 400 h 200 225 280 370 440 540 600 j 180 210 260 340 410 510 570 k 160 190 240 306 380 480 540 nxøp 4x7 8x7 8x9 10x9 10x9 16x9 14x9 mxør 6x7 8x7 8x9 8x9 12x9 16x9 16x9
MARINE CENTRIFUGAL FANS WPM 73-16-200
MARINE CENTRIFUGAL FANS WPM 73-16-200
MARINE ALUMINUM CENTRIFUGAL FANS WPMA 73-16-210 DESCRIPTION Aluminum marine centrifugal fans WPMA are destined for operation in ventilation and air conditioning systems of seagoing vessels and offshore objects. Operating data of fans are presented on enclosed performance curves P t =f(v), where: P t total pressure, Pa, V airflow, m 3 /s. Allowable tolerances of operating conditions (airflow, pressure, power consumption and efficiency) comply with the standard PN-77/M-43021. Temperature of conveyed medium must not exceed +45 o C, dust contents 0,15g/m 3. Housing and impeller of WPMA fans are made of sea water resistant aluminum alloy, welded. Electric motor is executed as induction, marine type, squirrel cage, three-phase. It s supply: 50 or 60Hz. MARKING Example: WPMA type fan of nominal diameter 140mm, with type 1 impeller and position RD0: WPMA-140/1-RD0 TECHNICAL SPECIFICATION & DIMENSIONS Fan type Nominal airflow Total nominal Impeller speed Maximum noise [m 3 /s] pressure [Pa] [1/min] level [db(a)] 140/1 0.10 1500 2820 90 140/2 0.25 1500 2780 94 160/1 0.33 2000 2835 96 140/1 0.12 2160 3400 96 140/2 0.30 2160 3440 98 160/1 0.40 2880 3455 101 Supply [V/Hz] 3x380/50 3x440/60
MARINE ALUMINUM CENTRIFUGAL FANS WPMA 73-16-210 Fan type Dimensions [mm] A B C D E F G H J K L M N O 140/1 140 100 120 235 195 215 255 71 195 245 90 100 90 112 50Hz 140/2 140 100 120 235 195 215 255 80 195 270 90 105 100 125 160/1 160 110 160 270 218 244 296 90 216 315 95 117 100 140 140/1 140 100 120 235 195 215 255 80 140 250 90 105 100 125 60Hz 140/2 140 100 120 235 195 215 255 90 140 310 90 110 100 140 160/1 160 110 160 270 218 244 296 90 216 340 95 117 125 140
MARINE ALUMINUM CENTRIFUGAL FANS WPMA 73-16-210
MARINE CENTRIFUGAL FANS WPM/R 73-16-220 DESCRIPTION Marine centrifugal fans WPM/R are destined for recirculation of air in ro-ro holds, engine rooms etc. They are provided with distributing box with studs for connection of spiral ductwork terminated with diffuser nozzles. Marine centrifugal fans WPM/R consist of marine centrifugal fan WPM, noise silencer with protecting wire guard (13x13mm) fitted on the inlet and the distributing box with studs for connection of spiral pipes on outlet. Fan is resiliently seated on foundation frame by means of rubber shock absorbers. Electric motor is in marine execution, explosion proof on request. Surface treatment: hot-dip galvanized. For determining of fan working parameters see 73-16-200. MARKING Example: WPM/R type fan of nominal diameter DN=200mm, in left position L (see drawing below), in Ex non-sparking execution: WPM/R-200-L-Ex TECHNICAL SPECIFICATION & DIMENSIONS Fan Dimensions [mm] Weight type A B C D F G H J K L [kg] 200 270 400 325 260 440 395 200 400 300 50 92 250 340 445 445 300 555 470 250 490 390 50 122
MARINE PORTABLE CENTRIFUGAL FANS WPMA/P-140 73-16-230 DESCRIPTION Marine aluminum portable centrifugal fans WPMA/P-140 are destined for supply or extract of air from spaces of seagoing ships or offshore object, that are not provided with forced ventilation system. Operating data of fans are presented on enclosed performance curves P t =f(v), where: P t total pressure, Pa, V airflow, m 3 /s. Allowable tolerances of operating conditions (airflow, pressure, power consumption and efficiency) comply with the standard PN-77/M-43021. Temperature of conveyed medium must not exceed +45 o C, dust contents 0,15g/m 3. Housing and impeller of WPMA/P fans are made of sea water resistant aluminum alloy, welded. Electric motor is induction type, squirrel cage, three-phase, in marine execution. Electric supply: 50 or 60Hz. Fans are provided with WPD-381 start/stop switch and 20m long supply cable without terminal connector. Accessories: storage aluminum box (standard outfitting), DN160 flexible hoses (number of hoses must be specified at the order). MARKING Example: WPMA/P-140 destined for operation in 50Hz electrical installation: WPMA/P-140-50 Hz TECHNICAL SPECIFICATION & DIMENSIONS Fan type Nominal airflow Nominal total Impeller speed Maximum noise [m 3 /s] pressure [Pa] [1/min] level [db(a)] Supply [V/Hz] 140/2 0.25 1500 2780 94 3x380/50 140/2 0.30 2160 3440 98 3x440/60
MARINE PORTABLE CENTRIFUGAL FANS WPMA/P-140 73-16-230
!"#$ %%%#&' ( ' &) #&'!!" #$ #% % #