Regent / 2500 Series Lawn Tractors & Mower Decks

Parts Manual 1HP Tractors Regent / 00 Series Lawn Tractors & Mower Decks Mfg. No. Description 100 Regent, 1HP Hydro 10 H, 1HP Hydro 11 Regent, 1HP Hydro 11 Regent, 1HP Hydro (CE) 1 H, 1HP Hydro Mower Decks Mfg. No. Description 1 " Mower Deck 10 " Mower Deck 1 0" Mower Deck (CE) 1 " Mower Deck 11 " Mower Deck Rev. 0/00

Table Of Contents TRACTOR / MOWER DECK COMPONENTS PAGES Frame Group... Steering Group... Engine & Electric Clutch - 1HP Honda... Transmission Group... 1 Transmission SERVICE PARTS - Tuff Torq K-Z Transaxle... 1 Controls Group... 0 Electrical Group... Hood, Dash & Fuel Tank Group... Seat & Seat Deck Group... Wheels & Tires Group... Decals Group - Brand & Model... 0 Decals Group - Safety & Common... " Mower Deck - Belt, Idler Arm & Hitch Group... " Mower Deck - Height Adjustment & Roller Bar... " Mower Deck - Housing, Arbors & Blades Group... 0 0" Mower Deck - Belt, Idler Arm & Hitch Group... 0" Mower Deck - Height Adjustment & Roller Bar... 0" Mower Deck - Housing, Arbors & Blades... 0 " Mower Deck - Belt, Idler Arm & Hitch Group... " Mower Deck - Height Adjustment & Roller Bar... " Mower Deck - Housing, Arbors & Blades... 0 Torque Specification Chart... Inside Back Cover

Frame Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 1 1 1 1 0 1 1 1 1 1 1 11 1 1 1 1 Insert Must Face Out 100 - Regent 11 - Regent 10 - H 11 - Regent 1 - H

Frame Group REF NO PART NO. QTY. DESCRIPTION 1 1 1 FRAME ASSEMBLY 1101 1 PLUG, Hole 111 1 PAD, Footrest RH 111 1 PAD, Footrest LH 1 1 FASTENER, Panel 1 NUT, Speed /1-1 101 CAPSCREW, Hex Head Flange Lock, /1-1 x / 101 1 WRAPPER ASSEMBLY, Hydro 10 CAPSCREW, Hex Head, 1/-1 x 1-1/ 111 WASHER, 1/ 11 1 SPACER 1 10 NUT, Hex Head, 1/-1 1 11 1 CARRIER ASSEMBLY, Hydro 1 11 1 SPACER 1 11 1 BAR, Torsion 1 01 1 NUT, Hex Head Aluminum Insert, /-1 1 1 1 WASHER, / 1 10 BUSHING, /, Nylon 1 11 1 SPACER 0 11 1 "J" HOOK, Hitch 1 101 1 CAPSCREW, Hex Head, /-1 x, G Footnotes 100 - Regent 11 - Regent 10 - H 11 - Regent 1 - H

Steering Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 11 1 11 Torque to - ft/lbs (- Nm) 1 1 1 1 1 1 1 Torque to 1 ft/lbs ( Nm) 1 1 1 0 Torque to - ft/lbs (- Nm) 1 0 1 Torque to - ft/lbs (- Nm) 1 1 Note: See Wheels & Tires Group 100 - Regent 11 - Regent 10 - H 11 - Regent 1 - H

Steering Group REF NO PART NO. QTY. DESCRIPTION 1 11 1 STEERING WHEEL 11 1 CAP 10 1 TUBE 100 1 PIN, Spring 101 1 SHAFT & PINION ASSEMBLY 110 CARRIAGE BOLT, /-1 x 1 0 1 PLATE, Mounting 1 NUT, Hex Head Whiz Lock, /-1 10 1 BUSHING 1011 WASHER 11 11 1 NUT, Hex Lock, /1-1 1 1 WASHER 1 1001 BUSHING 1 111 RING, Clipring Extension 1 101 1 CAPSCREW, Hex Head, /-1 x 1-1/ 1 111 1 WASHER 1 10 1 STEERING GEAR ASSEMBLY 1 11 1 LINK, 1." Long 1 10 NUT, Hex Flange Lock, /-1 0 11 1 CARRIAGE BOLT, /1-1 x 1 1 11 1 ARM & SPACER ASSEMBLYMY, LH Splined 1010 WASHER 111 1 PIN, Cotter 11 SPINDLE & CUP ASSEMBLY 111 SPACER 1 1 ROD 11 1 ARM & SPACER ASSEMBLY, RH 1 1 CAPSCREW, Hex Head, Taptite, /1-1 x / 10 CARRIAGE BOLT, /-1 x 1-1/ 0 111 1 CAPSCREW, Hex Head, /1-1 x 1-1/ 1 1 1 SPACER 1 1 SPACER 10 1 NUT, Hex Flange Lock, /1-1 Footnotes 100 - Regent 11 - Regent 10 - H 11 - Regent 1 - H

Engine & Electric Clutch - 1HP Honda NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 11 Torque to -1 in. lbs. 1 11 To like colored wires on engine 1 1 1 1 Ground Wires 1 0 Apply anti-seize to crankshaft 1 1 1 Apply pipe sealant to tapered threads Torque to 1- ft. lbs. 1 0 Torque to -0 ft. lbs. 1 Secures Carb. vent hose. Tie cluch wire to spring away from belt and pulley 1 0 100 - Regent 11 - Regent 10 - H 11 - Regent 1 - H

Engine & Electric Clutch - 1HP Honda REF NO PART NO. QTY. DESCRIPTION 1 11 1 DUCT, Muffler 10 1 PIPE, Manifold, RH * GASKET, Manifold 10 NUT, Hex, MM-1.0 0 CAPSCREW, Hex Head Taptite, MM-1.0 x 1MM 1 1 SHIELD, Manifold, RH 10 1 FUEL FILTER 011 CLAMP, Hose 11 1 HOSE, Fuel * 1 VOLTAGE REGULATOR 11 1 1 BRACKET, Voltage 1 * 1 ENGINE, 1HP Honda V-Twin GXV0, PXA1 1 0 CAPSCREW, Hex Head Taptite, MM-1.0 x 0MM 1 10 1 CLUTCH, Electric Ogura 1 1 CONTROL, Choke 1 110 1 LOCKWASHER, Internal Tooth, / 1 11 1 KNOB, Slot 1 10 CAPSCREW, Hex Head Taptite,1/-1 x / 1 11 1 CONTROL, Throttle 0 1 1 STOP, Belt 1 00 1 CLAMP 0 1 VALVE, Shut Off 00 1 KEY 111 1 LOCKWASHER 01 1 CAPSCREW, Hex Head, /1-0 x 11 1 TIE, Self Locking 1 1 PULLEY & HUB ASSEMBLY 0 CAPSCREW, Hex Head Taptite, /-1 x 1-1/ 01 CAPSCREW, Hex Head Taptite, /-1 x 0 1 WASHER, Hex 1 1 1 STOP, Belt 1 1 WASHER 0 LOCKWASHER, External Tooth, / 1 1 PIPE, Manifold, LH 1 1 MUFFLER 1 NUT, Speed, /1-1 1 1 DUCT, Muffler, Lower 1 CAPSCREW, Hex Head Taptite, /1-1 x 1/ 10 CAPSCREW, Hex Head Taptite, /1-1 x 1-1/ 0 PIVOT, Hood Footnotes * See your local Honda dealer/distributor for parts and service. 100 - Regent 11 - Regent 10 - H 11 - Regent 1 - H

Engine & Electric Clutch - 1HP Honda REF NO PART NO. QTY. DESCRIPTION 1 SPACER 101 CAPSCREW, Hex Head Taptite, /1-1 x / 100 WASHER Footnotes * See your local Honda dealer/distributor for parts and service. 100 - Regent 11 - Regent 10 - H 11 - Regent 1 - H 11

Transmission Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. See Frame Group 1 1 11 1 1 1 1 1 1 Part of frame. See Engine Group 1 1 0 1 1 1 0 11 See Wheels & Tires in Miscellaneous Group. See Frame Group 100 - Regent 11 - Regent 10 - H 11 - Regent 1 - H 1

Transmission Group REF NO PART NO. QTY. DESCRIPTION 1 11 1 CARRIAGE BOLT, /1-1 x 1 1 1 ROD, Hydro Control 11 1 NUT, Hex Lock ESNA Light, /1-1 11 WASHER, /1 101 1 CAPSCREW, Hex Head Taptite, /1-1 x / 10 1 STOP, Belt 11 NUT, Hex /1-1 11 LOCKWASHER, /1 11 1 PULLEY 10 1 CAPSCREW, Hex Head Flange Lock, /1-1 x 1-/ 11 11 1 LOCKWASHER 1 11 1 SPLINE COLLAR 1 11 1 V-BELT, Drive 1 11 1 FAN 1 110 "E" RING 1 10 1 ROD, Hydro Bypass 1 11 1 PIN, Cotter 1 1 1 TRANSMISSION ASSEMBLY 1 11 NUT, Hex Flange, /1-1 0 11 KEY, /1 x 1 00 WASHER, / 111 SPACER 10 CAPSCREW, Hex Head, /1-1 x -1/ 11 1 ANCHOR, Torsion Bar, LH 01 CAPSCREW, Hex Washer Head Taptite, /1-1 x -1/ 11 1 CAPSCREW, Hex Head, /1-1 x 1 11 1 CAPSCREW, Hex Head, /1-1 x 1-1/ 00 SPACER 11 1 ANCHOR, Torsion Bar, RH 0 111 PIN, Cotter 1 10 1 ROD, Brake 10 1 CAPSCREW, Hex Head, /1-1 x 1-/ Footnotes 100 - Regent 11 - Regent 10 - H 11 - Regent 1 - H 1

PLATE OF SMALLER INNER DIA. SHOULD CONTACT PISTONS. SEAL SIDE; OUTER Transmission SERVICE PARTS - Tuff Torq K-Z Transaxle NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 10 1 1 0 THICKER PLATE 1 1 0 1 0 11 1 1 1 1 0 1 1 1 1 1 1 0 0 1 1 0 0 1 0 1 100 - Regent 11 - Regent 10 - H 11 - Regent 1 - H 1

Transmission SERVICE PARTS - Tuff Torq K-Z Transaxle REF NO PART NO. QTY. DESCRIPTION 1 11 1 SNAP RING 11 1 PULLEY D 11 1 LOCK WASHER 11 SPLINE COLLAR 11 1 FAN 110 RING E 1 11 1 PUMP SHAFT 1 1 SEAL TC 10 0 1 RING, SNAP C 110 1 BEARING 0C 11 1 1 SEALING CAP 0 1 1 K0 MAGNET 1 10 1 HOLDER MAGNET 1 110 1 VENT VALVE 1 1 1 1 PIN * 1 10 1 ARM BRAKE 1 111 PIN SPRING *1 1 0 O-RING 1A P1 1 10 1 RETURN SPRING B 0 101 BUSHING 1.0 1 11111 SEAL 1** 10 1 SHAFT BRAKE 10 1 SHOE BRAKE 10 1 ACTUATOR BRAKE 11 1 CENTER CASE E CMP 1100 1 PIN *. 100 BOLT * 1101 1 FILTER K0 SNP 110 1 WASHER 1**1 0 1 1 CYLINDER BLOCK 1 110 1 BEARING 1 110 1 HOUSING 1 1 SHAFT MOTOR 1 RING, SNAP S 1 110 1 BEARING 0CU 1 1 MOTOR GEAR 10 WASHER 1**. 101 1 REDUCTION GEAR 1 1 COLLAR, FINAL P 0 10 1 FINAL PINION Footnotes 100 - Regent 11 - Regent 10 - H 11 - Regent 1 - H 1

Transmission SERVICE PARTS - Tuff Torq K-Z Transaxle REF NO PART NO. QTY. DESCRIPTION 1 100 1 REDUCTION SHAFT 10 1 AXLE SHAFT L 111 BUSHING 1111 THRUST WASHER 1111 RING 1 1 DIFF PINION 1 1 FINAL GEAR 10 1 AXLE SHAFT R 1 SCREW, TAPPING *0 0 1 WASHER, SEAL 1 1 SCREW, CAP *1 1 TAPPING SCREW * 1 1 LOWER HOUSING 1 IDS SPRING 1 BALL /1 1 IDS VALVE 1.0 111 1 SPRING PIN.0A* 1 1 COTTER PIN 1 1 CONTROL SHAFT 0 1 1 SP (TORSION 1 1 1 CONTROL ARM E 1 1 JERKY PLATE 1 1 FULCRUM (ECCENTRICIT 1 1 CYLINDER BLOCK 10 1 SPRING (PUMP) 110 1 THRUST PLATE 110 1 BEARING K1 110 1 THRUST PLATE 10 1 SWASH PLATE CMP. 0 110 THRUST METAL 1 1101 1 RING 1 SPRING 11 1 OIL SEAL 1**0 11 1 UPPER HOUSING O-RING 1A P1 1 WASHER, 1 1 NUT 1 110 1 PIN, ROLL *0 1 1 CONTROL LEVER 0 101 1 LEVER BYPASS 1 101 1 PIN.0A*0 Footnotes 100 - Regent 11 - Regent 10 - H 11 - Regent 1 - H 1

Transmission SERVICE PARTS - Tuff Torq K-Z Transaxle REF NO PART NO. QTY. DESCRIPTION 1 SPRING PIN *1 1 O-RING 1A PA 11 1 SHAFT (BYPASS) Footnotes 100 - Regent 11 - Regent 10 - H 11 - Regent 1 - H 1

Controls Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 1 1 Connect to Top of Frame 0 1 11 Part of Frame See Transmission Group 1 1 1 0 1 Connect to Lanced Notch in Top of Frame 1 1 1 1 1 1 1 100 - Regent 11 - Regent 10 - H 11 - Regent 1 - H 0

Controls Group REF NO PART NO. QTY. DESCRIPTION 1 11 1 KNOB 11 1 ROD, Parking Brake 10 1 SPRING, Extension 11 1 LEVER, Parking 111 1 WASHER, 1/ 111 BUSHING, 1/, Nylon 11 1 CARRIAGE BOLT, /-1 x -1/ 11 1 ARM, Idler 111 1 PULLEY, Backside, Idler, -1/ OD 110 1 SPRING, Extension 11 1 1 ROD, Brake 1 11 1 GUIDE BELT & STUD ASSEMBLY 1 00 1 SPACER 1 10 1 NUT, Hex Flange, /1-1 1 11 NUT, Hex Lock, /1-1 1 111 1 WASHER, /1 1 1 SPACER 1 0 1 SPRING, Compression 1 10 WASHER, /1 0 111 1 SPACER 1 11 1 STOP, Belt 1 1 NUT, Hex Head Whiz Lock, /-1 111 1 CAPSCREW, Hex Head, /-1 x 1-/ 11 1 LOCKWASHER, / 111 1 PULLEY, Idler, OD 111 PIN, Cotter, 1/ X / 11 WASHER, /1 11 CARRIAGE BOLT, /1-1 x / 11 1 CLAMP 0 1111 1 ROD, Clutch 1 11 1 PAD, Reverse Pedal 1 PAD, Brake Pedal 1000 1 FOOT PEDAL & BRAKE ARM ASSEMBLY 11 1 PAD, Forward Pedal Footnotes 100 - Regent 11 - Regent 10 - H 11 - Regent 1 - H 1

Electrical Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 11 To Starter Motor 1 1 1 1 1 1 0 1 1 1 11 To Engine Ground Bolt Right Front 1 1 To Circuit Breaker (Red) To Negative Battery Post Black 0 Gray To Engine Ground Bolt Right Front To PTO Clutch To Starter Solenoid To Engine Harness Plug 1 To Top Left of Upper Muffler Duct 100 - Regent 11 - Regent 10 - H 11 - Regent 1 - H

Electrical Group REF NO PART NO. QTY. DESCRIPTION 1 1 SWITCH, Rocker, Headlight 1 1 SWITCH, PTO, Push Pull 1 1 SWITCH ASSEMBLY, Ignition (Includes Ref. Nos.,,, & ) 10 1 LOCKWASHER, Internal Tooth 1 WASHER 11 1 NUT, Hex Flange, /- 110 1 COVER, Ignition Switch 111 KEY, Ignition 11 1 BOOT, Insulator 10 1 NUT, Hex Flange, MM x 1. 11 1 1 CABLE, # x -1/" Long 1 1 1 BREAKER, Circuit, 1 Volt 0 Amps 1 1 1 SCREW, Hex Head, Taptite, 1/-0 x / 1 1 1 BOOT, Insulator, Battery Terminal 1 1 LOCKWASHER 1 11 WASHER 1 1 CAPSCREW, Hex Head, 1/-0 x / 1 11 1 CAPSCREW, Hex Head, /1 x 1 x / 1 11 1 WASHER 0 10 1 ROD, Battery Hold Down 1 11 1 NUT, Hex Lock ESNA, /1-1 11 1 BATTERY, 1 Volt 1 NUT, Hex, 1/-0 111 1 WIRE, #1 x 11" Long 1 1 HARNESS, Wiring, For Honda Engines with Pin Connector 1 1 HARNESS, Wiring, For Honda Engines with out Pin Connector 1101 1 SHRINK TUBE, " Long 110 1 WIRE ASSEMBLY 111 1 SWITCH, NC, Gray, Operator Present 1011 1 SWITCH, NO, Black, Push Button W/Boot 0 1001 1 SWITCH, NC, Gray, Push Button, W/Boot 1 1 CLIP, Wire 11 TIE, Self Locking 101 CABLE, Red, # x -1/" Long Footnotes 100 - Regent 11 - Regent 10 - H 11 - Regent 1 - H

Hood, Dash & Fuel Tank Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 11 11 1 1 1 1 1 1 1 1 0 1 1 1 1 1 Panel, Left Side 0 Panel, Right Side 100 - Regent 11 - Regent 10 - H 11 - Regent 1 - H

Hood, Dash & Fuel Tank Group REF NO PART NO. QTY. DESCRIPTION 1 11 1 ELBOW, Fuel Tank to Fuel Hose 10 1 BUSHING 11 1 TANK, Fuel 10 1 CAP, Fuel 110 1 STRAP 1 1 FASTENER, Panel 11 NUT, Hex Lock ESNA light, /1-1 10 A/R WASHER 11 1 BULKHEAD & TUBE ASSEMBLY 10 NUT, Speed 11 1 SCREW, Hex Washer Head Taptite, 1/-0 x 1/ 1 100 SCREW, Hex Washer Head Taptite, 1/-0 x 1/ 1 10 1 BUSHING 1 11 1 MOLDING 1 11 1 DASHBOARD, Honda 1 10 SPACER 1 1 CLIP, Wire 1 1 CAPSCREW, Hex Head, 1/-0 x 1-1/ 1 110 1 PANEL, Hood, LH 1 110 1 PANEL, Hood, LH, Red 0 111 1 PANEL, Hood, RH, Orange 0 111 1 PANEL, Hood, RH, Red 1 11 1 HEADLIGHT ASSEMBLY, (Includes Ref. Nos.,,, ) 11 SOCKET, Headlight 11 1 BEZEL, Headlight 11 BULB, Headlight, 1.V 11 1 LENS, Headlight 10 NUT, Hex Lock ESNA light, 1/-0 11 1 GRILLE, Orange 11 1 GRILLE, Red 11 HINGE SPACER 0 PIN, Quick 1 111 WASHER 10 CAPSCREW, Hex Head Flange Lock, 1/-0 x / 11 1 HOOD, Orange 11 1 HOOD, Red 1 1 SEAL, Foam 11 1 DUCT, Cooling 11 1 SEAL, Foam Block Footnotes 100 - Regent 11 - Regent 10 - H 11 - Regent 1 - H

Seat & Seat Deck Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 1 0 1 1 1 11 1 1 1 1 1 1 1 1 100 - Regent 11 - Regent 10 - H 11 - Regent 1 - H

Seat & Seat Deck Group REF NO PART NO. QTY. DESCRIPTION 1 1 1 * SEAT ASSEMBLY 11 NUT, Hex Nylon Lock, /1-1 WASHER,/1 SPRING, Seat 11 1 PLATE, Spring Support 11 CARRIAGE BOLT, /1-1 x / 111 1 SWITCH, Seat, Used with Seat P/N 1 11 CAPSCREW, Hex Head Whiz Lock, /1-1 x 1/ 11 NUT, Hex Flange Whiz-Lock, /1-1 1 SPEED NUT, Tinnerman Lug Type, /1-1 11 11 1 PAN, Seat 1 101 CAPSCREW, Hex Head Whiz Lock, /1-1 x / 1 11 STOP, Rubber Seat 1 11 BAR, Seat Pivot 1 111 1 SEAT DECK, Orange 1 111 1 SEAT DECK, Red 1 11 1 CONTROL POD, Hydro 1 100 CAPSCREW, Taptite Hex Washer Head, /1-1 x / 1 00 1 CLAMP, Wire (Middle Bolt Only) 1 11 WASHER, /1 0 1 SPACER 1 110 1 CAP, Seat Adjust 11 1 LEVER, Seat Latch 1 1 SPRING, Extension 111 SIDE PANEL, Seat Slide 11 1 SLIDE, Seat Footnotes Optional arm rest kit avaliable under Part Number 1. 100 - Regent 11 - Regent 10 - H 11 - Regent 1 - H

Wheels & Tires Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. W11 1 REAR WHEELS & TIRES See Transmission Group FRONT WHEELS & TIRES 1 11 1 1 As Required 1 100 - Regent 11 - Regent 10 - H 11 - Regent 1 - H

Wheels & Tires Group REF NO PART NO. QTY. DESCRIPTION 1 11 KEY, /1 x 1111 WHEEL & TIRE ASSEMBLY 111 TIRE, 0 x - Super Trac II 111 WHEEL, x 1 VALVE STEM & CAP ASSEMBLY 00 WASHER 1010 WASHER "E"-RING 1 CAP, Hub 111 WHEEL & TIRE ASSEMBLY (Includes Ref. Nos., 11, 1, 1 & 1) 11 110 1 WHEEL & BUSHINGS ASSEMBLY (Includes Ref. No. 1) 1 111 BEARING 1 11 1 TIRE, 1 x. - Super Trac II 1 100 1 TUBE, Tire Footnotes 100 - Regent 11 - Regent 10 - H 11 - Regent 1 - H

Decals Group - Brand & Model NOTE: Unless noted otherwise, use the standard hardware torque specification chart. B11 1, 1, 11 1 1 100 - Regent 11 - Regent 10 - H 11 - Regent 1 - H 0

Decals Group - Brand & Model REF NO PART NO. QTY. DESCRIPTION 1 11 DECAL, Simplicity Icon 111 1 DECAL, Simplicity, Hood Stripe RH 111 1 DECAL, Simplicity, Hood Stripe LH 11 DECAL, Simplicity 10 1 DECAL, Touch Up Paint 1 1 DECAL, Regent, Silver & Blue 1 1 DECAL, 1HP 11 DECAL, Powered by Honda 11 DECAL, Massey Ferguson 1 1 DECAL, Massey Ferguson Hood Stripe, RH 11 1 1 DECAL, Massey Ferguson Hood Stripe, LH 1 10 1 DECAL, Touch Up Paint, Red 1 11 DECAL, Footnotes 100 - Regent 11 - Regent 10 - H 11 - Regent 1 - H 1

Decals Group - Safety & Common NOTE: Unless noted otherwise, use the standard hardware torque specification chart. C11 1,, 1 1 DANGER OPERATING ON SLOPES CAN BE DANGEROUS SEE OPERATOR'S MANUAL. IF YOU CANNOT BACK-UP A HILL, DO NOT DRIVE ON IT. WARNING AVOID SERIOUS INJURY OR DEATH READ OPERATOR'S MANUAL(S). KNOW LOCATION AND FUNCTION OF ALL CONTROLS. KEEP SAFETY DEVICES (GUARDS, SHIELDS, SWITCHES, ETC.) IN PLACE AND WORKING. REMOVE OBJECTS THAT COULD BE THROWN BY THE BLADE. DO NOT MOW WHEN CHILDREN OR OTHERS ARE AROUND. NEVER CARRY CHILDREN EVEN WITH BLADES OFF. LOOK DOWN AND BEHIND BEFORE AND WHILE BACKING. AVOID SUDDEN TURNS. IF YOU CANNOT BACK UP A HILL, DO NOT OPERATE ON IT. GO UP AND DOWN SLOPES, NOT ACROSS. IF MACHINE STOPS GOING UPHILL, STOP BLADE AND BACK DOWN SLOWLY. BE SURE BLADE(S) AND ENGINE ARE STOPPED BEFORE PLACING HANDS OR FEET NEAR BLADE(S). WHEN LEAVING MACHINE, SHUT OFF ENGINE, REMOVE KEY, AND SET PARKING BRAKE. ROTATING BLADES CUT OFF ARMS AND LEGS STOP MOWER WHEN CHILDREN ARE NEAR. NO RIDERS THEY FALL OFF. 11 DANGER DO NOT TOW TRACTOR! DAMAGE MAY RESULT TO TRANSMISSION. 1 1-0 1, 1 11 STOP ENGINE. MOTOR STOPPEN. MOTOR ANHALTEN. STOP MOTOR. ARRETER LE MOTEUR. FERMARE MOTORE. DO NOT TOW! NIET SLEPEN! NICHT SCHLEPPEN! IKKE BUGSERE! NE PAS REMORQUER! NON TRAINARE! PUSH DUWEN SCHIEBEN SKUB POUSSER SPINGERE DRIVE RIJDEN FAHREN KØR CONDUIRE GUIDARE 11 1 1 1 1 1 100 - Regent 11 - Regent 10 - H 11 - Regent 1 - H

Decals Group - Safety & Common REF NO PART NO. QTY. DESCRIPTION 1 1 1 DECAL, Belts & Mower Blades 11 1 DECAL, Operating Instructions 11 1 DECAL, Safety Instructions * 1 DECAL - Patent * 1 DECAL, Serial Number (Not Serviced) * 1 DECAL, CE & Serial Number Export (Not Serviced) 1 DECAL, USA Logo 11 1 DECAL, PTO Control Symbols 11 1 DECAL, Transmission Relese Valve, Hydros only 1 1 DECAL, " 1 1 DECAL, " 1 DECAL, Danger 11 101 1 DECAL, Height of Cut 1 1 DECAL, Danger 1 10 DECAL, Danger Symbol, (CE) 1 11 1 DECAL, Free Floating Mower 1 * 1 DECAL, OPEI (Not Serviced) 1 11 1 DECAL, Tunnel, Export, (CE) Footnotes * Not a service part. 100 - Regent 11 - Regent 10 - H 11 - Regent 1 - H

" Mower Deck - Belt, Idler Arm & Hitch Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 1 1 1 1 1 1 1 11 Hook Spring (Ref ) to capscrew & nut when assembled. 1 0 1 1 11 1 Hook Spring (Ref ) here when assembled. 1 Insert Must Face Out 10 - " Mower 1 - " Mower

" Mower Deck - Belt, Idler Arm & Hitch Group REF NO PART NO. QTY. DESCRIPTION 1 1 CAPSCREW, Hex Head, /-1 x -/ G 1 WASHER, Plain, / 11 1 GUARD, Spring 1 1 SPACER 110 1 PULLEY ASSEMBLY KIT, (Includes Ref. No. ) 1 1 GRIP, Lever 11 1 LOCKWASHER, / 110 1 NUT, Hex, /-1 11 1 SPRING, Idler Arm 11 1 NUT, ESNA Hex Lock, /-1 11 1 WASHER, / 1 111 BUSHING, /, Nylon 1 10 1 FITTING, Grease 1 * 1 CLUTCH LEVER ASSEMBLY, See Ref. No. 1 1 1 SPACER 1 10 1 NUT, Hex Flange Lock, /-1 1 10 WASHER, Plain, / 1 101 SPACER 1 11 CAPSCREW, Hex Head, /-1 x 1-/ 0 111 1 HITCH 1 11 1 ROD, Mower Hitch 11 1 ROD, Latch 101 1 NUT, Push, 1/ 10 1 SPRING, Hitch Release 0 1 CLUTCH LEVER ASSEMBLY w/ BUSHINGS, (Includes Ref. Nos. 1, 1, and 1) 11 1 V-BELT, Arbor Drive 01 NUT, Hex Lock Aluminum Insert, /-1 Footnotes * Not Serviced Separately. 10 - " Mower 1 - " Mower

" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. AA 1 0 1 0 0 Note: Apply Locktite 0 in Hole prior to assembling on rod. 1 1 Insert Must Face Out 1 1 0 11 1 1 1 1 1 0 1 0 0 1 10 - " Mower 1 - " Mower

" Mower Deck - Height Adjustment & Roller Bar REF NO PART NO. QTY. DESCRIPTION 1 1 CAPSCREW, Taptite Hex Washer Head, /1-1 x / 11 1 BRACKET, Upstop 11 CAPSCREW, Hex Head, /1-1 x 1-1/ 100 WASHER, /1 100 1 CLIP, Spring 11 1 ROD, Transport 10 SPACER 100 WASHER, 1/ 1 NUT, Hex Lock, /1-1 10 1 U-BRACKET 11 10 1 CARRIAGE BOLT, /1-1 x 1-1/ 1 11 1 ARM, Rear 1 1 CAPSCREW, Hex Head, Taptite, /1-1 x 1/ 1 11 1 BRACKET, Decal 1 101 1 DECAL, Height 1 11 1 ROD, Latch 1 110 1 CARRIAGE BOLT, /-1 x 1 1 1 1 ROCKER ARM ASSEMBLY 1 10 1 NUT, Hex Lock, 1/-0 0 11 NUT, HEx Lock ESNA, /-1 1 1 1 STRAP 11 1 ECCENTRIC 1 1 WASHER, Flat, /1 1001 CAPSCREW, Taptite Hex Washer Head, /1-1 x / 0 NUT, Hex, Flange Collar Lock, /1-1 01 NUT, Hex Lock, Aluminum Insert, /-1 10 1 CAPSCREW, Hex Head Taptite, /1 x / 0 1 NUT, Adjuster 10 SPACER 0 11 1 BAR, Roller, Support 1 11 CAPSCREW, Hex Head, /1-1 x 1 10 CAPSCREW, Taptite Hex Washer Head, /1-1 x 1 100 PUSHNUT, /" 11 ROLLER, End 1 WASHER, / 11 ROLLER 110 1 SHAFT ASSEMBLY 10 PIN 101 CLIP, Hair 0 110 GAUGE WHEEL Footnotes 10 - " Mower 1 - " Mower

" Mower Deck - Height Adjustment & Roller Bar REF NO PART NO. QTY. DESCRIPTION 1 1 E-RING, 1/ 11 ARM ASSEMBLY, Adjustable 10 WASHER, Flat, / 11 1 SPACER 110 1 SPACER 101 1 CAPSCREW, Hex Head, /-1 x 11 1 ARM, Pitch 10 1 LATCH 111 1 CAPSCREW, Hex, 1/-0 x -1/ 0 11 WASHER 1 11 1 SPRING, Compression 10 1 PUSH NUT, 1/ 11 1 GRIP 11 1 BUTTON 110 1 HANDLE ASSEMBLY 11 1 CARRIAGE BOLT, /-1 x 1-1/ Footnotes 10 - " Mower 1 - " Mower

" Mower Deck - Housing, Arbors & Blades Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 0 1 1 1 Torque to 0-0 ft/lbs 1 1 1 1 Note: for Export 1 for Domestic 1 0 11 0 Export 0 Only 11 0,1 1 1 1 1 Viewed From Bottom 1 1 0 1 Torque to - ft. lbs. 10 - " Mower 1 - " Mower 0

" Mower Deck - Housing, Arbors & Blades Group REF NO PART NO. QTY. DESCRIPTION 1 111 NUT, Hex, Flange, /1-11 WASHER, Belleville 10 1 PULLEY, LH, " OD 11 1 NUT, Hex, /1-1 111 HUB 111 COVER, Arbor Housing BEARING 110 SPACER GASKET, Foam 11 ARBOR HOUSING ASSEMBLY (Includes Fitting Ref. No. 11) 11 1 FITTING, Grease 1 111 1 STOP, Belt, LH 1 1 NUT, Hex, Whiz Lock, /1-1 1 110 CARRIAGE BOLT, 1/-0 x 1-1/, (CE) 1 10 WASHER, Flat, / 1 0 1 CAPSCREW, Taptite Hex Washer Head, /1-1 x 1-/ 1 111 WASHER 1 111 SHAFT, Arbor 1 111 SHIELD, Grass, Lower 0 1 BLADE, Mower, 1-1/ 1 1 1 BLADE, Mower, -1/ 1 WASHER, Hex 11 WASHER, Spring 1 CAPSCREW, Hex Head, /1-1 x -1/ 1 CAPSCREW, Taptite Hex Washer Head, /1-1 x / 1 1 MOWER DECK HOUSING, ", Orange 1 1 MOWER DECK HOUSING, ", Red 1 1 MOWER DECK HOUSING, ", Black 111 CARRIAGE BOLT, 1/-0 x / 110 CARRIAGE BOLT, 1/-0 x 1-1/, ( Total for CE) 1 DEFLECTOR, Plastic 101 NUT, Push On 0 10 CARRIAGE BOLT, 1/-0 x 1-1/, (CE) 1 1 CLAMP 11 1 WASHER, Plain, /1 1 1 SPRING 11 LOCKWASHER, 1/ 11 NUT, Hex, 1/-0 0 1 ROD, Deflector, Front 10 1 PULLEY, RH, -1/OD Footnotes 10 - " Mower 1 - " Mower 1

" Mower Deck - Housing, Arbors & Blades Group REF NO PART NO. QTY. DESCRIPTION 11 1 STOP, Belt, RH 10 CAPSCREW, Taptite Hex Washer Head, /1-1 x 1 0 11 PLUG, Plastic 1 111 1 COVER ASSEMBLY, LH, (CE) 1 CARRIAGE BOLT, 1/-0 x 1-1/, (CE) 111 1 COVER ASSEMBLY, RH, (CE) Footnotes 10 - " Mower 1 - " Mower

0" Mower Deck - Belt, Idler Arm & Hitch Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 1 1 To Slot "B" 11 0 1 0 1 1 To Slot "A" Slot "A" 1 1 1 1 1 Insert Must Face Out 1 1 1 Slot "B" 0 1 1-0" Mower

0" Mower Deck - Belt, Idler Arm & Hitch Group REF NO PART NO. QTY. DESCRIPTION 1 11 1 NUT, Hex Lock Esna Light, /-1 10 WASHER, / 11 1 PULLEY, Idler 11 1 V-BELT, Arbor Drive 11 1 BELT GUIDE 10 WASHER, / 1 1 ARM ASSEMBLY, Idler with Bushings & Fitting, Tooth 101 1 CARRIAGE BOLT, /-1 x 1 1 CAPSCREW, Hex Head, /-1 x -/ G 1 WASHER, / 11 11 1 SPRING, Extension, Idler Arm 1 1 1 SPACER, Hardened 1 11 1 GRIP, Black Vinyl for Handle 1 1 1 CAPSCREW, Hex Head, /-1 x -1/ 1 1 1 PULLEY 1 11 1 SPACER 1 1 NUT, Hex Flange Whiz Lock, Large, /-1 1 11 CAPSCREW, Hex Head, /-1 x 1-/ 1 1 SPACER 0 11 1 ROD, Mower Hitch 1 10 1 SPRING, Extension, Hitch Release 11 1 ROD, Latch 100 1 HITCH, Mower 101 1 NUT, Push 01 NUT, Hex Lock Aluminum Insert, /-1 11 1 WASHER & NUT ASSEMBLY, / x 1-1/ 11 1 SPRING, Extension 11 1 ARM, Idler 111 HUB 0 10 PULLEY, Idler 1 101 CAPSCREW, Hex Head, /-1 x 1001 1 CAPSCREW, Taptite Hex Washer Head, /1-1 x 1/ 1 1 SPACER 11 1 BELT GUIDE 1 1 BELT, Timing, Tooth Footnotes 1-0" Mower

0" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 1 0 Apply Locktite 0 in hole prior to assembly. 1 1 1 From "A" 1 11 1 0 1 0 To "A" 1 1 1 1 1 1 0 0 0 1 1 To Handle Assy 1 1 1 1 1 Insert Must Face Out 1-0" Mower

0" Mower Deck - Height Adjustment & Roller Bar REF NO PART NO. QTY. DESCRIPTION 1 11 CLIP, Hair Pin, 1/ x 1 100 WASHER, /1 10 SPACER 10 1 SHAFT & BAR ASSEMBLY, 0" Roller 11 ROLLER 11 ROLLER 1 1 WASHER, / 1 1 SPACER 11 1 ROD, Transport 100 1 CLIP, Hair Pin 11 10 1 U-BRACKET 1 1 NUT, Hex Centerlock /1-1 1 10 SPACER 1 100 WASHER, /1 1 11 CAPSCREW, Hex Head, /1-1 x 1-1/ 1 10 CAPSCREW, Taptite Hex Washer Head, /1-1 x 1 1 1 1 SPACER 1 1 1 PIVOT, / Hex 1 10 WASHER, / 0 11 1 PIN, Cotter 1 10 1 BRACKET, Adjusting 11 CARRIAGE BOLT, /1-1 x 1 10 NUT, Hex Flange Lock, /1-1 10 1 CARRIAGE BOLT, /1-1 x 1-1/ 111 1 ARM, 1 1/ 11 1 CAM, Eccentric 1 1/ Hex 1 1 WASHER, /1 11 LOCKWASHER, /1 1 FASTENER, Panel 0 1 1 SHAFT ASSEMBLY, Rocker 1 10 CAPSCREW, Hex Head, Taptite /1-1 x / 11 1 UPSTOP 1 CAPSCREW, Taptite Hex Washer Head, /1-1 x / 1 STRAP, Roller Support 100 1 NUT, Push / 11 1 BAR, Roller 01 1 NUT, Hex Aluminum Lock, /-1 1 SPACER 101 1 NUT, Hex Centerlock /-1 0 101 1 BRACKET, Height of Cut Footnotes 1-0" Mower

0" Mower Deck - Height Adjustment & Roller Bar REF NO PART NO. QTY. DESCRIPTION 1 101 1 DECAL, Height of Cut 111 1 ROD, Adjustment 10 1 CAPSCREW, Hex Head, /-1 x 1-/ 1 TRUNNION, Rod 11 NUT, Hex, /-11 110 1 PIN 10 1 NUT, Hex Flange Lock, /1-1 111 1 NUT, Hex Jam /-1 1001 1 NUT, Hex Flange, /-1 0 1 1 GUIDE ASSEMBLY, Rod 1 100 1 ROD & WASHER ASSEMBLY, Adjust Handle 110 1 GRIP, Black Vinyl For Rod 10 1 NUT, Hex Lock Esna Light, 1/-0 10 1 LATCH, /1 WIRE 111 1 CAPSCREW, Hex Head, 1/-0 x -1/ 11 1 ROD, Latch 10 1 HANDLE ASSEMBLY, Lift 11 1 SPRING, Compression 11 NUT, Hex, /1-1 0 11 1 GRIP, Black Soft for Rod 1 11 1 BUTTON, Black Nylon for Rod 10 1 PUSH NUT, 1/ Footnotes 1-0" Mower

0" Mower Deck - Housing, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 1 Torque to -0 ft/lbs (0- Nm) 1 11 0 1 1 1 0 1 1 1 1 1 1 1 1 1 0 1 0 Torque to - ft.lbs. (1- Nm) 1-0" Mower 0

0" Mower Deck - Housing, Arbors & Blades REF NO PART NO. QTY. DESCRIPTION 1 10 1 CAPSCREW, Hex Head, /1-1 x -/ G 1 1 WASHER, /1 11 WASHER, Spring 0 1 CAPSCREW, Hex Head, /1-1 x -1/ G 11 1 PULLEY 110 1 HUB 1 SPROCKET & FLANGE ASSEMBLY, Riveted, Tooth 1 SHIELD, Arbor Bearing, Upper 1 HOUSING, Arbor Top GASKET, Foam Poly 11 1 ARBOR SHAFT & BEARINGS ASSEMBLY 1 HOUSING, Arbor Bottom with Lube Fitting 1 1 CAPSCREW, Taptite Hex Washer Head, /1-1 x / 1 11 1 COVER, Arbor, LH 1 1 1 HOUSING ASSEMBLY, 0", Orange 1 1 1 HOUSING ASSEMBLY, 0", Red 1 11 1 BLADE, Mower, LH 1 1 PIN, Blade 1 1 ADAPTOR, Arbor 1 1 WASHER, Spline 0 10 CAPSCREW, Hex Head, /1-1 x -1/ G 1 10 1 CAPSCREW, Taptite Hex Washer Head, /1-1 x 1 00 WASHER, Shim 0 SHIELD, Arbor Bearing, Lower 1 ADAPTER, Blade 1000 1 DEFLECTOR, Discharge 11 1 BLADE, Mower, RH 11 1 CARRIAGE BOLT, /1-1 x 1 111 1 CARRIAGE BOLT, 1/-0 x / 101 1 NUT, Push 0 10 WASHER, 1/ 1 1 CLAMP 11 1 LOCKWASHER, Spring 1/ 11 1 NUT, Hex 1/-0 11 1 DOOR, Mulching, Black Plastic 1 1 SPRING, Torsion 111 1 ROD, Pivot 11 1 NUT, Hex /1-1 11 1 LOCKWASHER, Spring /1 111 1 WASHER, /1 Footnotes 1-0" Mower 1

0" Mower Deck - Housing, Arbors & Blades REF NO PART NO. QTY. DESCRIPTION 0 1 1 NUT, Push 1 101 1 COVER, Arbor, RH Footnotes 1-0" Mower

" Mower Deck - Belt, Idler Arm & Hitch Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Arbor Drive Pulley 1 Arbor Drive Pulley 1 Engine Pulley Tensioning Idler Pulley Arbor Drive Pulley 1 1 11 1 1 To Slot "A" 1 1 1 Slot "A" 1 1 1 Hook Spring (Ref ) here when assembled. 1 0 Insert Must Face Out 11 - " Mower 1 - " Mower

" Mower Deck - Belt, Idler Arm & Hitch Group REF NO PART NO. QTY. DESCRIPTION 1 1101 1 V-BELT, Arbor Drive 11 1 CAPSCREW, Hex Head, /-1 x -1/ 10 WASHER, / 11 1 PULLEY ASSEMBLY, OD 11 1 SPACER 1 1 GRIP, Lever 1100 1 ARM, Idler 11 1 LOCKWASHER, Spring, / 110 1 NUT, Hex, /-1 10 1 NUT, Hex Flange Lock, /-1 11 11 1 SPRING, Idler Arm 1 10 1 NUT, Hex, Center Lock, /-1 1 1 WASHER, / 1 11 1 SPACER, Idler Arm 1 10 1 CAPSCREW, Hex Head, /-1 x 1-1/ 1 11 CAPSCREW, Hex Head, /-1 x 1-/ 1 101 SPACER 1 11 1 WASHER, / 1 01 NUT, Hex Lock Aluminum Insert, /-1 0 11 1 ROD, Mower Hitch 1 11 1 ROD, Latch 111 1 HITCH 101 1 NUT, Push, 1/ 10 1 SPRING, Hitch Release Footnotes 11 - " Mower 1 - " Mower

" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. AA Note: Apply Locktite 0 in Hole prior to assembeling on rod 1 0 1 1 1 1 0 1 1 1 Insert Must Face Out 1 11 1 1 1 0 0 Lower hole with swing away rollers 1 0 1 Insert Must Face Out 0 1 11 - " Mower 1 - " Mower

" Mower Deck - Height Adjustment & Roller Bar REF NO PART NO. QTY. DESCRIPTION 1 101 CAPSCREW, Taptite Hex Washer Head, /1-1 x / 11 1 BRACKET, Upstop 11 CAPSCREW, Hex Head, /1-1 x 1-1/ 100 WASHER, /1 10 1 BRACKET, U 100 1 CLIP, Spring 11 1 ROD, Transport 10 SPACER 1 NUT, Hex Lock, /1-1 111 1 ARM, Rear 11 10 1 CARRIAGE BOLT, /1-1 x 1-1/ 1 11 1 QUADRANT, " 1 101 1 DECAL, Height 1 11 1 BRACKET, Decal 1 1 CAPSCREW, Hex Head, Taptite, /1-1 x 1/ 1 110 1 CARRIAGE BOLT, /-1 x 1 1 01 NUT, Hex Lock, Aluminum Insert, / 1 10 1 CAPSCREW, Hex Head Taptite, /1-1 x / 1 0 1 NUT, Adjuster 0 11 1 ROD, Latch 1 11 1 NUT, Hex Lock, ESNA, /-1 1 1 ARM ASSEMBLY, Rocker 1 STRAP 11 1 ECCENTRIC 1 1 WASHER, /1 1 CAPSCREW, Hex Head Taptite, /1-1 x / 0 NUT, Hex Flange Collar Lock, /1-1 11 1 CARRIAGE BOLT, /-1 x 1-1/ 1 SPACER, 1-1/ x / 0 10 SPACER 1 11 CAPSCREW, Hex Head, /1-1 x 1 10 CAPSCREW, Taptite Hex Washer Head, /1-1 x 1 110 1 SHAFT ASSEMBLY 100 PUSHNUT, / 11 ROLLER, End 1 WASHER, / 11 ROLLER 11 1 BAR, Roller, Support 10 PIN 0 101 CLIP, Hair Pin Footnotes 11 - " Mower 1 - " Mower

" Mower Deck - Height Adjustment & Roller Bar REF NO PART NO. QTY. DESCRIPTION 1 110 WHEEL, Gauge 100 WASHER, 1/ 1 "E"-RING, 1/ 11 ARM ASSEMBLY, Adjustable 10 WASHER, / 11 1 SPACER 1101 1 ARM, Pitch 11 1 SPACER 101 1 CAPSCREW, Hex Head, /-1 x 0 11 1 CAPSCREW, Hex Head, /1-1 x / 1 10 1 NUT, Hex Lock ESNA, 1/-0 10 1 LATCH 111 1 CAPSCREW, Hex Head, 1/-0 x -1/ 11 WASHER, /1 11 1 SPRING, Compression 10 1 PUSH NUT 11 1 GRIP, Lift Lever 11 1 BUTTON 110 1 HANDLE ASSEMBLY Footnotes 11 - " Mower 1 - " Mower

" Mower Deck - Housing, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. AA Torque nuts to 0-0 ft. lbs. 1 1 Apply gasket former to this surface if foam gasket (Ref. ) is not used. 1 1 1 11 1 0 Plug holes outside foot rest as required 0 1 1 Plug holes outside foot rest as required 1 1 1 1 1 Torque screws to - ft. lbs. 1 0 1 11 - " Mower 1 - " Mower 0

" Mower Deck - Housing, Arbors & Blades REF NO PART NO. QTY. DESCRIPTION 1 111 NUT, Hex, Flange, /1-11 WASHER, Belleville 1111 PULLEY, RH Arbor & LH Arbor, 1/ 111 1 HUB, Adapter, LH 1 COVER, Arbor Housing 0 BEARING, Upper 11 SPACER, Sleeve, Upper Bearing 11 SPACER, Arbor, Internal BEARING, Lower GASKET, Foam 11 11 ARBOR HOUSING ASSEMBLY (Includes Fitting Ref. No. 1) 1 1 FITTING, Grease 1 100 1 COVER, Arbor LH 1 1 CAPSCREW, Taptite Hex Washer Head, /1-1 x / 1 111 WASHER, Cup, / 1 111 1 SHAFT, Arbor LH 1 111 SHIELD, Grass, Lower 1 0 BLADE, Mower, 1-1/ 1 1 WASHER, Hex 0 11 WASHER, Spring 1 1 CAPSCREW, Hex, Head, /1-1 x 1-1/ 110 1 SHAFT, Arbor (RH) 11 1 HOUSING ASSEMBLY, Red 11 1 HOUSING ASSEMBLY, Orange 11 1 HOUSING ASSEMBLY, Black 11 1 COVER, Arbor (RH) 111 CARRIAGE BOLT, 1/-0 x / 101 NUT, Push 10 WASHER, Plain, 1/ 1 CLAMP 11 1 WASHER, Plain, /1 0 00 1 SPRING, Deflector Retaining 1 11 LOCKWASHER, 1/ 11 NUT, Hex, 1/-0 0 1 ROD, Deflector, Front 11 1 * PLUG, Hole 1 DEFLECTOR, Plastic 111 1 HUB, Pulley, RH 1101 1 PULLEY, Arbor (Center) 111 1 HUB, Pulley (Center) Footnotes * Plug holes outside footrest as required 11 - " Mower 1 - " Mower 1

" Mower Deck - Housing, Arbors & Blades REF NO PART NO. QTY. DESCRIPTION 11 1 SHAFT, Arbor (Center) 0 1 * CAPSCERW, Hex Head, Taptite, /1-1 x 1/ 1 11 * NUT, Hex Whiz Lock, /1-1 1 1 CAP, Spring End Footnotes * Plug holes outside footrest as required 11 - " Mower 1 - " Mower

Hardware Identification & Torque Specifications Common Hardware Types Hex Head Capscrew Washer Torque Specification Chart FOR STANDARD MACHINE HARDWARE (Tolerance ± 0%) Carriage Bolt Lockwasher Hex Nut Standard Hardware Sizing When a washer or nut is identified as 1/, this is the Nominal size, meaning the inside diameter is 1/ inch; if a second number is present it represent the threads per inch When bolt or capscrew is identified as 1/ - 1 x, this means the Nominal size, or body diameter is 1/ inch; the second number represents the threads per inch (1 in this example, and the final number is the body length of the bolt or screw (in this example inches long). The guides and ruler furnished below are designed to help you select the appropriate hardware and tools. 0 1/ 1/ / 1 1/ 1/ / 1/ 1/ / 1/ 1/ / Screw, 1/ x Body Diameter Body Length Nut, 1/ Inside Diameter Hardware Grade No Marks SAE Grade SAE Grade SAE Grade Size Of in/lbs in/lbs in/lbs Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm. - 1.1 0. 1. - 0. 1.. -.1. 0. - 1... 1/-0.. 1 1. 1/-. 1. 1 1.0 /1-1 11 1.0 1.1.0 /1-1 1. 1..0 /-1 0. 0 0. 1. /- 1.. 0.0 /1-1 0 0. 0.0 0. /1-0.. 0. 1/-1 0.0.0 1 1. 1/-0. 0 1. 10 1. /1-1. 1 1. 10 0.0 /1-1.0 10 1. 1. /-11 0 1. 10 0.0 0. /-1 0 1 10. 0. /- 10 1. 0..0 /-1 10. 00 0.0 0 1. /- 10. 00.0 00 1.0 /-1 1. 0. 0. 1-0. 0. 00 1,.0 1-1 0. 0 0. 1,000 1,0.0 NOTES 1. These torque values are to be used for all hardware excluding: locknuts, self-tapping screws, thread forming screws, sheet metal screws and socket head setscrews.. Recommended seating torque values for locknuts: a. for prevailing torque locknuts - use % of grade torques. b. for flange whizlock nuts and screws - use 1% of grade torques.. Unless otherwise noted on assembly drawings, all torque values must meet this specification. Wrench & Fastener Size Guide 1/ /1 / /1 DIA. 1/ DIA. 1/ Bolt or Nut Wrench /1 /1 Bolt or Nut Wrench 1/ / Bolt or Nut Wrench /1 /1 Bolt or Nut Wrench (Bolt) / Wrench (Nut) 11/1 1/ Bolt or Nut Wrench /