OCCUPATIONAL TOOLS AND EQUIPMENT LIST

Similar documents
OCCUPATIONAL TOOL AND EQUIPMENT LIST

ACCREDITATION FACILITY AUDIT CHECKLIST

th ANNUAL SKILLS MANITOBA COMPETITION CONTEST DESCRIPTION

2011 Cat Hand Tools and Shop Supplies

ALLTRADE & POWERBUILT NEW PRODUCT (SOME SHELF LIFT ITEMS)

FACILITY ACCREDITATION CHECKLIST R: 04/27/06 APPRENTICESHIP Designated Trade: Motor Vehicle Mechanic Level (circle one)

Installation Instructions Truckin Suspension Lift Kit 1999-Newer DODGE DAKOTA-DURANGO (Rack and Pinion)

A* CHAIN HOOKS, 1/4" EA A* CHAIN HOOKS, 5/16" EA A* BELT, SANDER 120 GRIT EA 3" X 24" A* BELT, SANDER 120

Tools Online Retailer Returns - TRACY - February 16

Impulse Buy Products. Impulse Buy Products. To order call: Fax:

INSTALLATION INSTRUCTIONS

PRELIMINARY INSTALLATION INSTRUCTIONS. PARTS LIST Left front trim piece

Introduction to Automotive Collision Repair Technology

TOOLS AND EQUIPMENT. C. For Specialty Tools and Equipment, the program need only have those tools for the areas being accredited.

ONLY use MLR, Ast, or MST

QTY 3D PN. FCS PART NUMBER DESCRIPTION

Unit: (For 63 students) ALL TOOLS & Machineries are made of high quality with prescribed specification of Govt of India DGE&T and QCI.

Installation Instructions Truckin Suspension 6.5 Suspension Lift Kit DODGE DAKOTA-DURANGO (worm and sector)

Sand & Gravel, Inc. Job Demands Analysis. Purpose of Activities:

HOW - TO SCRATCH & DENT REPAIRS

PNEUMATIC TOOLS & ACCESSORIES

2010 Mustang V6 Shaker CDC #

INSTALLATION INSTRUCTIONS

Global Tool Catalogue

$4.99 $26.99 $19.99 $25.99 $7.99 $10.99 $12.99 $15.99 $17.99 $ Rubber Mallet-Hickory Handle. Dead Blow Hammer-Fiberglass Handle

Mustang Shaker

Master Sets with Foam Tray Organizers

General Maintenance Tool Kit (GMTK) Drawer layout

Quick drills out spot weld on fenders, doors, etc. Free speed: 11000rpm Collet size: 6mm (1/4")

Clinton Heating & Air Conditioning, Inc Prune Avenue, Fremont, CA Saturday, June 24, 2017 at 11:00 a.m.

1GR-FE ENGINE CONTROL SYSTEM

ACCREDITATION FACILITY AUDIT CHECKLIST

SS77HFZ Toyota Land Cruiser 70 series (Wide Nose) Suits: 4.2L 6cyl Diesel (1HZ engine) Replaces Factory Toyota Raised Air Intake (Genuine Snorkel)

Agricultural Technology and Mechanical Systems

INSTALLATION INSTRUCTIONS

* * * * * * * * ET Number. Tool Image Barcode. Ryobi Cordless String Trimmer ET0001

Supplying the Products Needed to Help Industry Move

RECOMMENDED TOOLS AND CHECKERS. Page RECOMMENDED TOOLS AND CHECKERS... 2

Phone:

Perkins Statewide Articulation Agreement. Documentation item: Secondary Competency Task List Coversheet

INSTALLATION INSTRUCTIONS

$1795 $2350 $540 $1650 $2700 $1200 BONUS! BONUS! More than 3,000 tools within our range! 295PC TOOL KIT 262PC TOOL KIT 7 DRAWER ROLL CABINET

* * * * * * * * ET Number. Tool Image Barcode. Ryobi Cordless String Trimmer ET0001

Deuce/Ace Installation Instructions

Panel Beating Hammers

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS

MISCELLANEOUS WOOD CHISEL

INSTALLATION INSTRUCTIONS

INSTALLATION AND OWNER S MANUAL Side Illumination Lights Z5150 for use with K 1200 LT

Trunk spoiler Right torsion bar Template. Trunk spoiler Right torsion bar Template. Clips (4) Double face tapes A (4) Double face tapes B (2)

CIRRUS AIRPLANE MAINTENANCE MANUAL

SCION xd INTERIOR LIGHTING UPGRADE Preparation

INSTALLATION INSTRUCTIONS

Part# JL AIR IT UP 4 Tire On Board Air Delivery System. (Requires External Air Source)

Lab Specifications. Automotive 2 Wheeler Repair

NIS NAV AM (MY15 >) - Aluminium Tonneau Cover ATC0051 (silver) ATC0052 (Black) Installation Time: Approx. 60 Minutes WARNING!

INSTALLATION INSTRUCTIONS

MASTER TOOL CATALOGUE TOLEDO - 60 YEARS OF EXCELLENCE

D Piece 12 Point Standard Metric Socket Set 4-12 mm List Price: $25.65 $16.99

$ Ex. GST $

Why Dynamic Toolboxes?

Electricity. 3 or 4 Member Team

Electricity. 3 or 4 Member Team

PROBLEMS OR QUESTIONS? Or via

99.95 Kit Kit. Call to order: 4:1 Clear Coat 1 Gallon with Activator Medium or Fast $ Kit

ELECTRIC POWER TOOLS SIM180

Affiliate: Charlotte Tool Inventory As Of: 9/24/2018

1NZ-FE ENGINE CONTROL SYSTEM

Affiliate: Cincinnati Tool Inventory As Of: 1/22/2018

INSTALLATION INSTRUCTIONS

General Medium Duty KLM C&C 2-Stage Rear Air Suspension Installation Instructions

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS

327. Repairing the bent and cracked fenders Tap out the dents from the back side of the fender with a fender hammer.

INSTALLATION INSTRUCTIONS

GENUINE PARTS INSTALLATION INSTRUCTIONS

SE400-M3-MMO-100/(U)SLQ-32A(V)3 WARNING. b. Engage swingbolts 3A11H9 with SRU front panel support hooks H1 and tighten nuts on swingbolts.

INSERT DISTRICT NAME. AUTO BODY REPAIR I and II

Instructions to fit the Snorkel Kit S002D for the Jeep Grand Cherokee WJ / WG Diesel 1.0 Introduction

Expedition Front Bumper Instructions

Features and Specifications for Impact Wrenches

AUTOMOTIVE MANUFACTURING

1 JULY ~ 30 AUGUST 2013 Micro - Tec

99.95 Kit Kit Kit. Call to order: 4:1 Clear Coat 1 Gallon with Activator Medium or Fast $ Kit

Automotive Service Tools

FPU SYSTEMS OPERATION MANUAL BOH PORTABLE DRAWER MODULE (PDM) (INCLUDING REPAIR PARTS & SPECIAL TOOL LIST) BOH FPU Field Pack-up Units CHAPTER 5

89.95 Kit Kit. Call to order: 4:1 Clear Coat 1 Gallon with Activator Medium or Fast $ Kit

Instructions to fit the Snorkel Kit S009 for the Chevrolet Silverado or GMC Sierra 1.0 Introduction

SPECIAL PRICE PROMOTION. WORKSHOP EQUIPMENT. BODYWORK TOOL ASSORTMENT; BELT SANDER, IMPACT DRIVER, TORQUE WRENCH; HOTMELT ADHESIVE GUN.

INSTALLATION INSTRUCTIONS

Toyota 4RUNNER With/MR Overhead Video

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS

Urethane Grade Reducer

Air Conditioner for M915 A0/A1 Truck

Instructions to fit the Snorkel Kit S164. for the Holden RA Rodeo from (NO swage) 1.0 Introduction

INSTALL/REMOVAL INSTRUCTIONS: WINDOW LIFT MOTOR

INSTALLATION INSTRUCTIONS

ITEM PART NO. DESCRIPTION QTY BODY - SNORKEL (SS1410HP) " AIR RAM ASSEMBLY BRACKET - UPPER MOUNTING 1

Transcription:

OCCUPATIONAL TOOLS AND EQUIPMENT LIST Motor Vehicle Body Repairer (Metal and Paint) Government of Newfoundland Labrador Department of Advanced Education and Skills December 2011

Preface This document is intended as a companion to the December 2011 Plan of Training for the Motor Vehicle Body Repairer (Metal and Paint) occupation. It identifies the necessary tools and equipment required by apprentices and training institutions for the completion of apprenticeships. Acknowledgements Advisory committees, industry representatives, instructors and apprenticeship staff provided valuable input to the development of this document. Without their dedication to quality apprenticeship training, this document could not have been produced. We offer you a sincere thank you. Contact Information Department of Advanced Education and Skills Tel: 709-729-2729 / 1-877-771-3737 Email: app@gov.nl.ca Web: www.gov.nl.ca/app Note: The numbers suggested in the following Tools and Equipment List represent the required minimum. Please verify this list with your selected training institution.

Tools and Equipment List Motor Vehicle Body Repairer (Metal and Paint) SECTION A: TOOLS AND EQUIPMENT REQUIRED BY STUDENT Units for individual Allan Keys 2 Sets (1 Metric & 1 Standard) TOOLS Applicators 2 Sets of 3 B Chisels 1 Set of 5 B Drill Bits 1 set B Files 1 B Hack Saw 1 B Hammers (Bumping, pick, ball peen) Measuring Tape 1 B Pliers (Needle Nose & Linesman) 3 1 each B Punches 1 B Putty Knife 1 B Ratchets 1 Set B Razor Blades And Holder 1 B Sanding Blocks ( 1 5, 1 8.5, 1 Soft Block) 1 of each B B B MVBR_12-136_TEList_2011-12 1

SECTION A: TOOLS AND EQUIPMENT REQUIRED BY STUDENT Units for individual Screw Driver 1 Set B Sockets (Combination Set) 1 set B Trim Clip Removal Tools (1 Narrow & 1 Wide) 1 of each B Utility Knife 1 B Wrenches (Combination Set) 1 set B EQUIPMENT Air Blow Gun 1 B Air Purifying Respirator (Charcoal) Tool Box (Approved Container) 1 B 1 B Calculator 1 B Goggles 1 B Paint Suit 1 B Safety Eye Wear 1 B Safety Footwear 1 B Welding Clamps 2 B Welding Gloves 1 B Note: If identifying sets, please include specific information. MVBR_12-136_TEList_2011-12 2

Allan Keys 6 Sets (3 Metric & 3 Standard) TOOLS 5 per set B Applicators 6 Sets of 3 5 per set B Body Spoons 2 8 B Brooms 5 3 B Car Wash Soap 12 Bottles 1 B Caulking Gun 3 5 B Chamois 3 5 B Chisels 3 Set of 5 5 per set B C-Clamps 3 5 B 3 1/2 Cut-Off Tool 2 8 B Cutting Torch 1 Set 15 B Drill 2 (1 3/8 and 1 ½ ) 8 B Drill Bits 3 Sets 5 B Files 3 5 B Hack Saw 3 5 B Hammers (Bumping, pick, ball peen) 3 of each 5 per each B Heat Gun Hole Punch / Crimper Magnet Measuring Sticks 2 8 B MVBR_12-136_TEList_2011-12 3

Measuring Tape 3 5 B Paint Shaker Plasma Cutter Pliers (Needle Nose & Linesman) 3 each 5 per each B Power Polishers Propane Torch Punches Putty Knife 3 5 B 3 5 B Racks 2 8 B Ratchets 3 Sets 5 per set B Razor Blades And Holder 3 5 B Rags 6 50lb Boxes 3 B Sander 5 3 B Sanding Blocks ( 1 5, 1 8.5, 1 Soft Block) 3 of each 5 per each B Screw Driver 3 Sets 5 per set B Shovel Sockets (Combination Set) 3 sets 5 per set B Tin Snips 2 Sets 8 B Tip Cleaner 4 4 B Torque Wrench Trim Clip Removal Tools (1 Narrow & 1 Wide) 3 of each 5 per each B MVBR_12-136_TEList_2011-12 4

Utility Knife 3 5 B Wire Crimping Tool 2 8 B Wire Cutters 2 8 B Wire Stripping Tools 2 8 B Wire Wheels 2 8 B Wrenches (Combination Set) 3 set 5 per set B EQUIPMENT 2-Part Adhesive Gun Air Blow Gun 3 5 B Air Hose 8 2 B Ball Joint Remover Benches 8 2 B Calculator 3 5 B Chemical Cleaner 4 Bottles 4 B Computer 15 1 B Computerized Diagnostic Equipment 2 8 B Continuity Tester 2 8 B Corrosion Protection Applicator Corrosion Protection Material Covered Disposal Containers 5 Gallons 3 B 4 4 B Drop Light 3 5 B MVBR_12-136_TEList_2011-12 5

Duct Tape 2 8 B Dust Mask 12 Boxes 1 B Ear Protectors 1 Box 15 B Electrical Tape 10 Rolls 2 B Environmentally Safe Disposal Containers Eye Wash Station Fax Machine Fire Blanket Fire Extinguishers 3 5 B Fire Hoses First Aid Station GMAW Welder 3 5 B Goggles 3 5 B Grinder 3 5 B Heat Drying Equipment Hot/Cold Glass Removal Tools Latex Gloves 3 Boxes 5 B Manufacturers Installation And Specifications All-Data Online Masking Materials 200 Rolls Tape, 10 Rolls Paper, 1 Roll Plastic Cover 5 B Measuring Equipment MVBR_12-136_TEList_2011-12 6

Mixing Tools (Stir Sticks) 10 2 B Paint Application Equipment (Spray Gun) 4 4 B Paint Booth Paint Identification Manuals Paint Manufacturer s Literature 1 Set 15 B 1 Set 15 B Paint Mixing Machine Paint Scales Piano Wire 1 Roll 15 B Plastic Repair Equipment (Welder) Pneumatic Air Chisel Positive Pressure Air Fed Respirator 4 4 B Power Sanding Equipment 5 3 B Primer Application Equipment Rivet Gun 2 8 B Safety Eye Wear 3 5 B Sand Blaster Sandpapers 30 Boxes 5 B Sealant 12 Tubes 2 B Soldering Tools Solvent Resistant Gloves 3 Boxes 5 per box B Spot Welder MVBR_12-136_TEList_2011-12 7

Spring Compressor Strainers 4 Boxes 4 per box B Tack Rags 3 Boxes 5 per box B Test Lamps Uni-Spotter (Dent Puller) Vacuum Cleaner Water Hose Welding Clamps 6 3 B Welding Gloves 3 5 B Note: If identifying sets, please include specific information. MVBR_12-136_TEList_2011-12 8