Cylinder (C I liner)(incl.2,3,4,184)( 2-5/8") Pin, Dowel Plug, Oil drain, 1/ B Seal, Oil Intake Valve

Similar documents
Cap, Lower valve spring. Cap, Lower valve spring

For Discount Tecumseh Engine Parts Call or H Page 1 of 8 Engine Parts List #1

Spring, Valve Cap, Lower valve spring

For Discount Tecumseh Engine Parts Call or HH E Page 1 of 8 Engine Parts List #1

Cap, Lower valve spring (Std.) Cap, Lower valve spring (1/32" OS) Cap, Lower valve spring (1/32" OS) Cap, Lower valve spring (Std.

Screw, 5/16-18 x 2" (Use as required)

For Discount Tecumseh Engine Parts Call or V J Page 1 of 8 Engine Parts List #1

For Discount Tecumseh Engine Parts Call or V H Page 1 of 8 Engine Parts List #1

Screw, 5/16-18 x 2" (Use as required)

For Discount Tecumseh Engine Parts Call or TVM N Page 1 of 8 Engine Parts List #1

For Discount Tecumseh Engine Parts Call or TVM N Page 1 of 8 Engine Parts List #1

C 0 Valve, Exhaust (1/32" oversize) C 0 Valve, Exhaust (Standard) (Conventional

For Discount Tecumseh Engine Parts Call or H R Page 1 of 8 Engine Parts List #1

For Discount Tecumseh Engine Parts Call or ECH A Page 1 of 8 Engine Parts List #1

Cylinder Assy. (2-1/2" Bore) (Cast-iron Pin, Dowel Plug, Drain Seal, Oil A 0 Valve, Intake (Standard)

HM N Page 1 of 10 Engine Parts List #1

HMSK R Page 1 of 8 Engine Parts List #1

For Discount Tecumseh Engine Parts Call or OV490EA B Page 1 of 7 Engine Parts List #1

Illustrated Parts List to

Illustrated Parts List to

Illustrated Parts List to

Illustrated Parts List to

Illustrated Parts List to

Illustrated Parts List Industrial/Commercial to

PARTS LIST. Craftsman 5.5 HP Snow Thrower Model

Illustrated Parts List to

Illustrated Parts List Vanguard to Compliance

13A2693G190 LT-165 (2003) Page 1 of 31 Carburetor

Illustrated Parts List to

Illustrated Parts List to

14A6816H190 GT-2150 (2003) Page 1 of 28 Carburetor

Illustrated Parts List to

Illustrated Parts List to 83499

22in Recycler. Lawnmower. Parts Catalog. Form Number Model No and up. Model No and up.

Illustrated Parts List to 90199

Illustrated Parts List to

Air Intake/Filtration

Mfg. No:

22in Recycler. Lawnmower. Parts Catalog. Form Number Rev A. Model No and up.

Illustrated Parts List to

Illustrated Parts List to 93299

22in Recycler Lawnmower

Craftsman Snow Thrower Model PARTS LIST

Illustrated Parts List

Page 1 of HP B&S Vanguard Engine

PARTS MANUAL. RGV6100/6101 Generators. Models. PUB-GP1201A Rev. 12/99

Illustrated Parts List to 95999

365-SUB Engine : Engine Assembly 365-SUB [1/1] Page 1 of 5

Introduction WISCONSIN ROBIN WR-WOI-21 OPM REV DATE: This catalog is designed to identify Wisconsin Robin parts.

PARTS MANUAL. R1300 Generator. Model. PUB-GP1182 Rev. 7/98

Model 16CG5AMQ

22in Recycler Lawnmower

MGE Series Generators. Model MGE12000ROU. Parts Breakdown. NM Products Corporation 2002 All Rights Reserved

TRU-POWER, INC. Product Line GENERAL PURPOSE ENGINE Model Name G300 Type QZDX Mfg Section ENGINE Illustration CYLINDER

Carter Bros. Mfg. Co., Inc.

Illustrated Parts List

1028LE Power Max Snowthrower

Mfg. No:

Illustrated Parts List I Walk Mower Repair Parts Manual

Illustrated Parts List to

826LE Power Max Snowthrower

Parts Breakdown G6100R

CRAFTSMAN ROTARY LAWN MOWER- - MODEL NUMBER

Mid Size Traction Unit

Illustrated Parts List

TRU-POWER, INC. Product Line GENERAL PURPOSE ENGINE Model Name G200 Type QCX Mfg Section ENGINE Illustration CYLINDER - CYLINDER HEAD

Power Max 826 LE Snowthrower


6000W Generator. 6000W Generator. 6000W Generator. 6000W Generator. Cylinder barrel. Cylinder head system assy. Description. APA Part No.

TRU-POWER, INC. Product Line GENERAL PURPOSE ENGINE Model Name G200 Type HQAF Mfg Section ENGINE Illustration CYLINDER - CYLINDER HEAD

SV Idle Speed 1750 RPM/High Speed 3400 RPM : Air Intake/Filtration [1/13] Page 1 of 26

PARTS MANUAL COMMERCIAL GENERATOR REV 11/06

Mid Size Traction Unit

JI Case ATenneco Company

CYLINDER CRANKCASE. Ref. Part No. Number Description Qty Remarks

PARTS MANUAL. RGV12000/12100 Generator. Model. PUB-GP1420 Rev. 12/01

SV735S-SV : Air Intake/Filtration [1/14] Page 1 of 28

Illustrated Parts List. Model Series 10T500. TYPE NUMBERS 0001 through TABLE OF CONTENTS. Air Cleaner... 6 Blower Housing/Shrouds...

PARTS MANUAL EY35 / EY40 ENGINES. Models. PUB-EP5716A Rev. 04/00

26674 LINK-THROTTLE NOS SPRING-GOV. NOS SPRING-GOV. CONTROL NOS A NOS SPRING-GOV. NOS VALVE-EXHAUST USED PACK

Power Clear Snowthrower

Illustrated Parts List. Model Series 09S500. TYPE NUMBERS 0520 through TABLE OF CONTENTS. Air Cleaner... 5 Blower Housing/Shrouds...

Air Intake/Filtration

Illustrated Parts List 9J900

TRU-POWER, INC. Product Line GENERAL PURPOSE ENGINE Model Name G400 Type QJ0 Mfg Section ENGINE Illustration CYLINDER HEAD - CYLINDER

Illustrated Parts List. I nd ustrial/com mercial Model Series to

TRU-POWER, INC. Product Line GENERAL PURPOSE ENGINE Model Name G400K1 Type QB6 Mfg Section ENGINE Illustration CYLINDER HEAD - CYLINDER

PARTS LIST MP4030EH/MP5030EH CONTENTS

Power Clear Snowthrower

Mfg. No: 49T G1

Power Max 1028 LXE Snowthrower

Illustrated Parts List

Power Max 1028LXE Snowthrower

Illustrated Parts List

Mfg. No: 124P F1

824 Snowthrower. Parts Catalog. Form Number Rev A. Model No and up. Model No and up.

Power Max 826LE Snowthrower

Illustrated Parts List

PARTS MANUAL EY20 ENGINE. Model. PUB-EP5705A Rev. 03/00

Illustrated Parts List. Model Series. TYPE NUMBERS 0113 through TABLE OF CONTENTS

Transcription:

HH60-105106F Page 1 of 9

HH60-105106F Page 2 of 9 1 34761 Cylinder (C I liner)(incl.2,3,4,184)( 2-5/8") 2 27652 Pin, Dowel 3 27642 Plug, Oil drain, 1/4-18 4 27876B Seal, Oil 5 32783 Intake Valve (Std.) (Incl. 9) 5 32784 Intake Valve (1/32" OS) (Incl. 9) 6 27878A Exhaust Valve (Std.) 6 27880A Exhaust Valve (1/32" OS) (Incl. 9) 7 27882 Cap, Upper valve spring 8 27881 Spring, Valve 9 32581 Cap, Lower valve spring 11 31856A Crankshaft (Incl. 12 & 13) 12 29783 Pin, Crankshaft gear Used in early production. This gear is serviceable ONLY when itis pinned to the crankshaft. 13 27884 Gear, Crankshaft Used in early production. This gear is serviceable ONLY when itis pinned to the crankshaft. 14A 31797B Piston & Pin Ass'y. (Std.)(2-5/8")(In cl.16) 14A 31798B Piston & Pin Ass'y. (.010" OS) (Incl. 16) 14A 31799B Piston & Pin Ass'y. (.020" OS) (Incl. 16) 14 34503 Piston, Pin & Ring Set (Std.) (2-5/8" Bore) 14 34504 Piston, Pin & Ring Set (.010" OS) 14 34505 Piston, Pin & Ring Set (.020" OS) 15 34854 Ring Set (Std.) (2-5/8" Bore) 15 34855 Ring Set (.010" OS) 15 34856 Ring Set (.020" OS) 16 27888 Ring, Piston pin retaining 17 31380C Rod Assy., Connecting (Incl. 18) 18A 30682 Bolt, Connecting rod (Early productio n) 18 650662C Screw, Connecting rod (Late productio n) 19 26073 Connecting rod bolt washer (Early pro duction) 20 28264 Connecting rod nut (Used on early pro duction) 21 33156 Camshaft 22 34034 Lifter, Valve 23 31303B Cover, Cylinder (Incl. 24, 27 & 105) 24 28427 Seal, Oil 26 30684 * Gasket, Cylinder cover 27 31546 Bushing, Crankshaft 28 650451 Screw, 1/4-20 x 1" 29 650599 Screw, 1/4-20 x 1-1/2" 30 650489 Screw, 1/4-20 x 5/8" 31 30939A Cover, Cylinder head 32 28938C * Gasket, Cylinder head 33 30938A Head, Cylinder (Incl. 3 of 36) 34 33636 Resistor Spark Plug 35 26073 Washer, Flat (Use 35 650570 Washer, Flat (Use 35 650691 Washer, Flat (Use 36 650697A Screw, 5/16-18 x 2-1/2" (Use as requi red) 36 650695A Screw, 5/16-18 x 2-1/4" (Use as requi red) 36 650694A Screw, 5/16-18 x 2" (Use 37 650128 Screw, 10-24 x 1/2" (Use 37 650597 Screw, 10-24 x 5/8" (Use

HH60-105106F Page 3 of 9 38 27896A * Gasket, Breather cover 39 28423 Body, Breather 40 28424 Element, Breather 41 28425 Cover, Valve spring 43 32447 Tube, Breather 45 27915A * Gasket, Intake 46 30195A Flange, Carburetor (Incl. 79 & 80) 48 30196 Screw, 5/16-18 x 3/4" 49 29918 Lockwasher 50 650548 Screw, 8-32 x 5/16" 51 30319 Rivet, Split (Used on early productio n) 52 32326A Lever, Governor (New lever does not need 1 of Ref #49,51,53,54,132,133) 53 30322 Lock Nut, 8-32 (Use 54 29916 Clamp, Governor lever (Use as require d) 55 30205 Bracket, Adjusting 56 31710 Link, Throttle 58 29216 Locknut, 10-32 59 29752 Nut & Lockwasher, 1/4-28 60 650572 Screw, 1/4-28 x 1-1/8" 61 29826 Screw, 10-32 x 3/4" 62 29642 Ring, Retaining 63A 30699C Rod Assy., Governor (Incl. 64 & 65) 63 30699B Rod Assy., Governor (This one piece gov. rod is no longer used. It is replaced by 30699C assy., Ref.#63A) 64 30700 Yoke, Governor 65 650494 Screw, 6-40 x 5/16" 66A 34012 Dipstick (Incl. 68) 68 29673 * Gasket, Dipstick 69 29747B Screw, 5/16-24 x 21/32" 70 32158E Blower Hsg. (For elec.starter)(incl.1 89,190) 71 33876 Gasket, Stator 72 31461 Bushing, Crankshaft 73 29536 Baffle, Blower housing 74 650561 Screw, 1/4-20 x 5/8" 75 31688A * Gasket, Carburetor 81A 650152 Screw, 8-32 x 3/8" 81 30196 Screw, 5/16-18 x 3/4" (Use as require d) 81 28820 Screw, 10-32 x 1/2" (Use 81 650521 Screw, 10-32 x 1-1/8" (Use as require d) 82 27272A * Gasket, Air cleaner 83 31708 Bracket, Air cleaner 85 31715 Body, Air cleaner 89 730127 Air Cleaner Ass'y. (Incl. 81,81A,82,83,84,85,90G & 298B) (Use 98 28569 Compression Spring (Used with 29500 screw)(use 98 32924 Compression Spring (Used with 650688 screw) (Use 98 31342 Compression Spring (Used with 650549 screw) (Use

HH60-105106F Page 4 of 9 99 650549 Screw, 5-40 x 7/16" (Use 99 29500 Screw, 8-32 x 3/4" (Use 99 650688 Screw, 10-32 x 1 (Use 101 650625 Washer, Thrust 102 30884 Key, Flywheel 103 31843A Bracket, Governor gear 104 650836 Screw, 10-24 x 1/2" 105 31845 Shaft, Mechanical governor 106 30590A Washer, Flat 107 30591 Gear Assy., Governor (Incl. 106) 108 30588A Spool, Governor 109 29193 Ring, Retaining 113 30063 Screw, 1/4-20 x 1/2" 115 410144B Fuel Cap (White Plastic)(Standard)(As req.) 115 33032 Fuel Cap (Red Plastic) (Spurt Resistant, Low Profile) (Use 115 34210 Fuel Cap (Red Plastic) (Spurt Resistant, High Profile) (Use 119 29774 Fuel Line (Braided 8.25") (Use as req uired) 119 30705 Fuel Line (Braided 16") (Use as requi red) 119 30962 Fuel Line (Braided 32") (Use as requi red) 120 26460 Clamp, Fuel line (Use 121 32401 Muffler 125 27930A * Gasket, Exhaust 126 30196 Screw, 5/16-18 x 3/4" 127 26073 Washer, Flat 128 650694A Screw, 5/16-18 x 2" 132 650548 Screw, 8-32 x 5/16" (Early production ) 132 650139 Screw, 8-32 x 1/2" (Early production) 144 650542 Screw, 5/16-18 x 3/4" 146 29538 Base, Engine mounting 147 650128 Screw, 10-24 x 1/2" 148 30622A Extension, Blower housing 186 27275 Clip, Wire (Use 186 29443 Clip, Fuel line (Use 193 610118 Cover, Spark plug 224 31386 Spring, Extension 225B 31711B Control Bracket (Incl. 98, 99 & 226) 226 610973 Terminal Assy. 229 28942 Screw, 10-32 x 3/8" 230 27793 Clip, Conduit 232 34235 Ground Wire 262 29716 Screw, 1/4-28 x 7/16" 264 32125 Cup, Starter 265 590417 Screen, Starter cup 266 650815 Washer, Belleville 267 8116 Nut, Hex 298 34346 Decal, Instruction 298A 550223 Decal, Name 298A 33310 Decal, 5 HP Mini-Bike (Use as require d) 298A 31517 Decal, H.P. (5 H.P.) (Use as required ) 298A 32173 Decal, H.P. (6 H.P.) (Use as required ) 299 30547A Contact Assy., Breaker 300 30548B Condenser

HH60-105106F Page 5 of 9 301 631021 Inlet Needle, Seat & Clip Assy. 303 631828 Carburetor (Incl. 75 & 301) (Refer to Division 5, Section A, page 144 for breakdown) 304 610689A Magneto (Refer to Division 5, Section B, page 24 for breakdown) 306 590420 Rewind Starter (Refer to Division 5, Section C, page 25 for breakdown) 310 33235A * Gasket Set (Incl. items marked *)

HH60-105106F Page 6 of 9 Engine Parts List #2

HH60-105106F Page 7 of 9 Engine Parts List #2 35 26073 Washer, Flat (Use 35 650570 Washer, Flat (Use 35 650691 Washer, Flat (Use 36 650697A Screw, 5/16-18 x 2-1/2" (Use as requi red) 36 650695A Screw, 5/16-18 x 2-1/4" (Use as requi red) 36 650694A Screw, 5/16-18 x 2" (Use 38 27896A * Gasket, Breather cover 43 32447 Tube, Breather 81 30196 Screw, 5/16-18 x 3/4" (Use as require d) 81 28820 Screw, 10-32 x 1/2" (Use 81 650521 Screw, 10-32 x 1-1/8" (Use as require d) 82 27272A * Gasket, Air cleaner 84A 31700 Element, Air cleaner 86A 34697 Air Cleaner Elbow Assy.(Use in 730561 only.) 89A 730128 Air Cleaner Ass'y. (Incl. 82,90A,90B,90D thru 90G,97 & 298B) (Use as req.) 111B 34823 Bracket, Lower fuel tank 114A 31977 Fuel Tank (Incl. 115) 117 28584 Fitting, Fuel strainer & elbow 121E 391026 Muffler (Incl. 124, 124A & 124B) (This spark arrester mufflercan be used on any model) 124A 33171 Muffler Screen (Use 124B 33185 Cover & Tube, Muffler (Use as require d) 124 650578 Screw, 8-18 x 3/8" 125 27930A * Gasket, Exhaust 134 31288 Muf.Adapter Kit(Incl.125,136,137)(As req.) 135 730130 Muf.Adapter Kit(Incl.125 & 138)(As re quired) 136 6021A Screw, 5/16-18 x 1-1/2" (Use as requi red) 137 650697A Screw, 5/16-18 x 2-1/2" (Use as requi red) 138 30196 Screw, 5/16-18 x 3/4" (Use as require d) 199 29212 Screw, 1/4-28 x 7/16" 200 650570 Washer, Flat 201A 31979 Strap, Fuel tank 204 650451 Screw, 1/4-20 x 1" 205 650456 Nut, 1/4-20 233 34819 Air Cleaner Elbow (Incl.44,76,78,83A,86A,100)(Use in 730561 ass'y. only) 234 730561 Air Cleaner Kit (Incl.38,43,44,76,78,79,82,83A,84,84C,86A,87,90,100A (Use only on engines with an externally ventedfully adjustable carburetor.) 273 650687 Screw, 10-32 x 5/16" (Use as required )

HH60-105106F Page 8 of 9 Engine Parts List #3

HH60-105106F Page 9 of 9 Engine Parts List #3 37 650128 Screw, 10-24 x 1/2" (Use 37 650597 Screw, 10-24 x 5/8" (Use 37A 27261 Washer, Flat (Use 41 28425 Cover, Valve spring 44 32446 Grommet, Breather tube 56 31710 Link, Throttle 69 29747B Screw, 5/16-24 x 21/32" 98 28569 Compression Spring (Used with 29500 screw)(use 98 32924 Compression Spring (Used with 650688 screw) (Use 98 31342 Compression Spring (Used with 650549 screw) (Use 99 650549 Screw, 5-40 x 7/16" (Use 99 29500 Screw, 8-32 x 3/4" (Use 99 650688 Screw, 10-32 x 1 (Use 182 32683A Gasket, Fuel pump cover (Use as requi red) 183 32955 Cover, Fuel pump pad (Use as required ) 184 9556 Plug, Pipe 1/8-27 (Use 185 30063 Screw, 1/4-20 x 1/2" (Use as required ) 225 730152 Control Bracket(Incl.91 thru 97)(As r eq.) 226 610973 Terminal Assy. 227 33177 Terminal (Use 229 28942 Screw, 10-32 x 3/8" 230 27793 Clip, Conduit 262 29716 Screw, 1/4-28 x 7/16" 266 650815 Washer, Belleville 267 8116 Nut, Hex 305 33018 Harness Assy., Adapter (Use as requir ed) 306 590420 Rewind Starter (Refer to Division 5, Section C, page 25 for breakdown) 308 33328D Starter Motor Kit (110-120 Volt) NOTE: This 110-120 volt starter motor kit may have been added to this engine. This can be added only if cylinder has drilled and tapped starter mounting bosses and a ring gear flywheel has been added (see #309). Refer to service number stamped on end cap of motor, 309 30811A Flywheel (Ring gear flywheel requiredon engines using 110-120 volt starter motor kits listed above.)