UPS SYSTEMS PDUs SURGE PROTECTORS POWER INVERTERS DATACENTER UPS. Product Catalog

UPS SYSTEMS PDUs SURGE PROTECTORS POWER INVERTERS DATACENTER UPS Product Catalog www.cyberpower.com www.cyberpower.com

ONLINE S 3-PHASE SERIES (15/20KVA, 3 PHASE IN 1 PHASE OUT) VERSATILE POWER PROTECTION WITH SCALABLE RUNTIME FOR A WIDE RANGE OF POWER REQUIREMENTS FROM MEDIUM DATACENTERS TO INDUSTRIAL FACILITIES CyberPower Online S 3-Phase Series UPS offers state-of-the-art technology with quality and reliability, protecting small data centers, intelligent equipment, and sensitive devices against all power disturbances while allowing customize solution to meet different power requirements from different sectors. Designed with the integrated IGBT technology and high-speed DSP control arithmetic, these UPS modules deliver superior performance through reduced component while enhancing extreme efficiency. Features such as parallel capability for capacity and redundancy, extended backup options, user-friendly graphical display, and optional SNMP network management capability make the Online S 3-Phase the most effective UPS with manageability and serviceability in its class. With the extreme efficiency, power factor corrected input, and paralleling capability, these all result in lower total cost of ownership and reduced carbon footprint. OLS3S20KE APPLICATIONS SME Businesses & Datacenters Mission-critical Applications Computer Room, Service Center Internet Service Provider (ISP), Internet Data Center (IDC) Telecommunication and Network Equipment Other Sensitive Electronics OPTIONAL ACCESSORY SNMP communication card (RMCARD302/303/305) Environmental Sensor FEATURES Generator Compatible Bypass Overload Capability Intelligent Management Independent Charger Cold Start In-Built * Extended Runtime - Up to 15 battery packs Available with Up to 4 Units in Parallel Parallel N+1 Redundancy Multifunction LCD Readout USB and Serial Connectivity Port Emergency Power Off (EPO) Port SNMP/HTTP Remote Management Capability (Optional) PowerPanel Business Edition Software *OLS3S15KE/ OLS3S20KE only PERFECT OUTPUT POWER Online Double Conversion Topology provides extra layer insulation from disruptive power problems by continuously operating off battery power and delivering clear and consistent pure sine wave output to critical systems. DIGITAL CONTROL SYSTEM The UPS power module is configured with high frequency double conversion power pulse width modulation (PWM) associated with fully digital signal processing control (DSP), providing intelligent management with great sensitivity to enhance efficiency and reliability while reducing component count. SCALABILITY & PARALLELING TECHNOLOGY The Online S (3-Phase) UPS includes the advantage of scalability, allowing the addition of up to 4 UPS to the existing backup power system. With its advanced parallel architecture, it allows each UPS to evenly share the power consumed by rear end loads, thus achieving N +1 power redundancy protecting against UPS failure and significantly increasing system reliability. DUAL AC INPUT The dual AC input connection ensures an additional level of redundancy by allowing the secondary source of AC input as the backup supply when the major input source is not available. REDUCED TOTAL COST OF OWNERSHIP (TCO) The Online S 3-Phase UPS achieves higher power efficiency up to 98% in Economy Mode, making it the most efficient UPS in the industry. Higher operating efficiency equates to lowered BTU heat dissipation and lowered idle power consumption, resulting in an operating expense reduction and a lower carbon footprint. MULTIFUNCTION LCD CONTROL PANEL Online S 3-Phase Series UPS come with an innovative display panel, showcasing load, runtime, power and other information at a single push-of-a-button. REMOTE MANAGEMENT CAPABILITIES Administrators could access, monitor and perform remote management and configuration of the UPS via standard web browsers or network management system (NMS) through the optional network management card. In addition, the Online S 3-Phase series offers an optional environmental sensor along with network management card for real-time temperature and humidity readings to ensure the systems are operating under appropriate environmental conditions. MONITORING & MANAGEMENT SOFTWARE The included power management software provides real-time monitoring of critical power conditions of the systems. During the event of load interruption, administrators will receive immediate notifications to safely shutdown the operating system in an orderly manner. Model Name OLS3S15KE OLS3S15KEXL OLS3S20KE OLS3S20KEXL General UPS Topology Double-Conversion Energy Saving ECO Mode Efficiency > 97% Energy Star Qualified - Active PFC Compatible Input Voltage 220 240Vac (Line to Neutral)/380 415Vac (Line to Line) Input Voltage Range 176 276Vac (Line to Neutral)/305 478Vac (Line to Line) Input Frequency Range 50/60Hz ± 10% (Auto-sensing) Rated Input current 68.2A 90.9A Input Power Factor 0.99 Cold Start Plug Type Terminal Block VA 15000 20000 Watts 13500 18000 On Waveform Sine Wave On Voltage 208, 220, 230, 240Vac (Configurable) Automatic Voltage Regulation (AVR) - On Frequency 50/60Hz ± 0.05Hz Outlets - Total 1 Outlet Type Terminal Block Outlets - & Surge Protected - Outlets - Surge-Only Protected - Outlets - Widely Spaced - Outlets - Critical Load - Outlets - Non-Critical Load (NCL) - Outlets - ECO Controlled Outlets - USB Charging Ports - Rated Power Factor 0.9 Harmonic Distortion THD < 2% at Linear Load, < 5% at Non-linear Load Transfer Time 0ms Runtime at Half Load (min) 17.6 Depends on external batteries 12.8 Depends on external batteries Runtime at Full Load (min) 6.4 Depends on external batteries 1.5 Depends on external batteries Type Sealed Lead-Acid Size 12V/9AH - 12V/9AH - Quantity 20*2-20*2 - User Replaceable Hot-Swappable - Typical Recharge Time 8 Hours Depends on external batteries Depends on external batteries 8 Hours Built-in Charger (4A max.) Built-in Charger (4A max.) Smart Management (SBM) Mode Extended Module BPSE240V82A Replacement Pack - Replacement Pack Quantity - Surge Protection & Filtering Surge Suppression 445 Joules Phone Protection RJ11 - Phone / Network Protection RJ11/RJ45 - Management & Communications LCD Control Panel 21 different settings options via the UPS Setting menu Detachable LCD Control Panel Option - HID Compliant USB Port Serial Port Emergency Power Off (EPO) Port Dry Contacts - LED Indicators Audible Alarms Software PowerPanel Business Edition SNMP / HTTP Remote Monitoring, with optional RMCARD302 / RMCARD303 Form Factor Tower - UPS Module Dimensions (WxHxD) (mm.) 350 x 890 x 650 Weight (kg.) 172 56 172 56 Installed Rack Height - - Power Module Dimensions (WxHxD) (mm.) - Weight (kg.) - Power Module Rack Height - - Module Dimensions (WxHxD) (mm.) - Weight (kg.) - Module Rack Height - Environmental Operating Temperature 32 F to 104 F / 0 C to 40 C Operating Humidity 0% - 90% non-condensing Operating Elevation 0-3281 feet (0-1000 meters) Storage Temperature 5 F to 113 F / -15 C to 45 C Storage Relative Humidity 0% - 95% non-condensing Online Thermal Dissipation 3487 BTU/hr

THREE-PHASE UPS STP 33 SERIES (15/20/30/40/60/80KVA, 3 PHASE IN 3 PHASE OUT) HSTP 33 SERIES (10/15/20/30/40/60/80/90/100/120KVA, 3 PHASE IN 3 PHASE OUT) VERSATILE POWER PROTECTION WITH SCALABLE RUNTIME FOR A WIDE RANGE OF POWER REQUIREMENTS FROM MEDIUM DATACENTERS TO INDUSTRIAL FACILITIES CyberPower STP 33 and HSTP33 Series UPS offers state-of-the-art technology with quality and reliability, protecting small data centers, intelligent equipment, and sensitive devices against all power disturbances while allowing customize solution to meet different power requirements from different sectors. Designed with the integrated IGBT technology and high-speed DSP control arithmetic, these UPS modules deliver superior performance through reduced component while enhancing extreme efficiency. Features such as parallel capability for capacity and redundancy, extended backup options, user-friendly graphical display, and optional SNMP network management capability make the STP 33 and HSTP33 series the most effective UPS with manageability and serviceability in its class. With the extreme efficiency, power factor corrected input, and paralleling capability, these all result in lower total cost of ownership and reduced carbon footprint. STP3T40KE APPLICATIONS SME Businesses & Datacenters Mission-critical Applications Computer Room, Service Center Internet Service Provider (ISP), Internet Data Center (IDC) Telecommunication and Network Equipment Other Sensitive Electronics PERFECT OUTPUT POWER Online Double Conversion Topology provides extra layer insulation from disruptive power problems by continuously operating off battery power and delivering clear and consistent pure sine wave output to critical systems. DIGITAL CONTROL SYSTEM The UPS power module is configured with high frequency double conversion power pulse width modulation (PWM) associated with fully digital signal processing control (DSP), providing intelligent management with great sensitivity to enhance efficiency and reliability while reducing component count. SCALABILITY & PARALLELING TECHNOLOGY The STP33 and HSTP33 Series UPS includes the advantage of scalability, allowing a capacity increase of up to 400Kva (STP33 series) and 480Kva (HSTP33 series) of the total load to the existing backup power system. With its advanced parallel architecture, it allows each UPS to evenly share the power consumed by rear end loads, thus achieving N+1 power redundancy protecting against UPS failure and significantly increasing system reliability. DUAL AC INPUT The dual AC input connection ensures an additional level of redundancy by allowing the secondary source of AC input as the backup supply when the major input source is not available. REDUCED TOTAL COST OF OWNERSHIP (TCO) The STP 33 and HSTP33 Series achieve higher power efficiency up to 98% in Economy Mode, making it the most efficient UPS in the industry. Higher operating efficiency equates to lowered BTU heat dissipation and lowered idle power consumption, resulting in an operating expense reduction and a lower carbon footprint. OPTIONAL ACCESSORY SNMP communication card Temperature Sensor Dust filter Parallel Kit FEATURES ADVANCED QUALITY Wide input voltage and frequency range for different utilities True online double conversion topology High input power factor (>0.99), low input THDi (<3%) Strong load adaptability for linear and nonlinear load Intelligent system protection design with N+1 power module redundancy FLEXIBILITY & SCALABILITY Optional In-built battery models for extended backup options * (for STP3T15/20/30KEBC and HSTP3T10/15/20/30/40KEBC only) Optional external battery enclosures for flexible runtime capacity Scalable design to accommodate various power requirements Parallel capable of up to 400Kva (STP33) and 480Kva (HSTP33) for increased capacity RELIABILITY Integrated IGBT modules instead of discrete components Dual or single AC input connections Independent charger for batteries Intelligent battery management High speed DSPs with digital control to ensure high quality power supply Friendly generator interface MANAGEABILITY Easy operation and installation Easy access of serviceability with bottom cable connection Inbuilt touch screen LCD for real-time information monitoring and management *(for STP3T40/60/80/100/120KE and HSTP3T60/80/90/100/120KEBC only) Remote management capability SUSTAINABILITY Low total cost of ownership and carbon footprint Incredible low noise system design Superior operating efficiency during ECO mode, minimizing energy losses and operating costs STP3T40KE MONITORING & MANAGEMENT (LCD / SNMP / SOFTWARE) The convenient monitoring and management feature allows administrators to easily perform local/remote monitoring and management of battery/power conditions, calibrating UPS system parameters and automatic alert notifications. MULTIFUNCTION LCD CONTROL PANEL STP 33 and HSTP33 Series UPS come with an innovative display panel, showcasing load, runtime, power and other information at a single push-of-a-button. Select models in STP 33 and HSTP33 Series even feature a large touch screen LCD panel, which allows administrators to operate, control, and easily access all measured parameters including UPS and battery status, event logging, battery management system and even component diagnose system to easily identify the faulty component during system failure. REMOTE MANAGEMENT CAPABILITIES Administrators could access, monitor and perform remote management and configuration of the UPS via standard web browsers or network management system (NMS) through the optional network management card. MONITORING & MANAGEMENT SOFTWARE The included power management software provides real-time monitoring of critical power conditions of the systems. During the event of load interruption, administrators will receive immediate notifications to safely shutdown the operating system in an orderly manner.

STP3T40KE HSTP3T120KE TECHNICAL SPECIFICATIONS Model Name STP3T15KE STP3T20KE STP3T30KE STP3T40KE STP3T60KE STP3T80KE STP3T100KE STP3T120KE Configuration Topology Pure Sine Wave Model Brief Three Phase input / Three Phase output Tower UPS Capacity (VA / Watts) 15000 / 13500 20000 / 18000 30000 / 27000 40000 / 36000 60000 / 54000 80000 / 72000 100000 / 90000 120000/ 108000 Main Input Input Voltage 380V/400V/415V(line to line); 220V/230V/240V(line to neutral) Input Frequency 50/60Hz Power Factor >0.99 Input Voltage Window -40% ~ +20% (derating power); -20% ~ +25% (full load) Frequency Window 40Hz-70Hz Voltage ±240VDC Quantity of lead-acid cells 40=[1 battery(12v) ], 240=[1 battery(2v) ] Charger Power 10%*Power (selectable from 0~20%) Built-in internal battery model STP3T15KEBC STP3T20KEBC STP3T30KEBC N/A Bypass Bypass Voltage 380V/400V/415V, (line to line) / 220V/230V/240V, (line to neutral) (Three phase) Bypass Voltage Window -20%-+15% Bypass Overload Capability load<125%, long time operation; 125%< load <130%, last for more than 1 hour; 130%<load<150%,last for more than 6 minutes; load>150%, last for more than 100ms Voltage 380V/400V/415V, three phase; 220V/230V/240V, one phase Voltage Precision 1% (balance load),1.5% (unbalance load) Voltage THD (Total Harmonic Distortion) THD<2%(linear load), THD<5%(nonlinear load) Power Factor 0.9 Crest Factor 3:1 Phase Tolerance 120 ±0.5 (balance and unbalance load) Overload Capability <105%,long time operation; 105%<load<110%, transfer to bypass after 1hour; 110%<load<125%, transfer to bypass after 10 minutes; 125%<load<150%, transfer to bypass after 1 minute; >150%, transfer to bypass after 200ms System System Efficiency Normal mode: 95%; ECO mode: 98% Mode Efficiency 95% Display LCD+LED and keyboard LCD+LED, Touch screen and keyboard Interface (Communication Ports) RS232,RS485,SNMP card,epo,dry contacts Installation / Connection Terminal block connection Operation Temperature 0-40 C Storage Temperature -25 C~70 C Relative Humidity 0-95% (non-condensing) Noise (db) <55dB Maximum parallel units 4pcs Weight (kg) 46 46 60 93 186 208 256 278 Dimensions (H x W x D) (mm) 668*280*730 668*280*730 788*320*781 1100*540*762 1350*600*855 1600*600*855 TECHNICAL SPECIFICATIONS Model Name HSTP3T10KE HSTP3T15KE HSTP3T20KE HSTP3T30KE HSTP3T40KE HSTP3T60KE HSTP3T80KE HSTP3T90KE HSTP3T100KE HSTP3T120KE Configuration Topology Pure Sine Wave Model Brief Three Phase input / Three Phase output; Tower UPS Capacity (VA / Watts) 10000 / 9000 15000 / 13500 20000 / 18000 30000 / 27000 40000 / 36000 60000 / 54000 80000 / 72000 90000 / 81000 100000 / 90000 120000/ 108000 Main Input Input Voltage 380V/400V/415V(line to line); 220V/230V/240V(line to neutral) Input Frequency 50/60Hz Power Factor >0.99 Input Voltage Window -40% ~ +20% (derating power); -20% ~ +25% (full load) Frequency Window 40Hz-70Hz Voltage ±240VDC Quantity of lead-acid cells 40=[1 battery(12v) ], 240=[1 battery(2v) ] Charger Power 10%*Power (selectable from 0~20%) Built-in internal battery model HSTP3T10KEBC HSTP3T15KEBC HSTP3T20KEBC HSTP3T30KEBC HSTP3T40KEBC N/A Bypass Bypass Voltage 380V/400V/415V, (line to line) / 220V/230V/240V, (line to neutral) (Three phase) Bypass Voltage Window -20%-+15% Bypass Overload Capability load<125%, long time operation; 125%< load <130%, last for more than 10 minutes;130%<load<150%, last for more than 1 minutes 150%<load<400%,last for more than 1 second; load>400%, last for more than 200ms Voltage 380V/400V/415V, three phase; 220V/230V/240V, one phase Voltage Precision +1.5% ~ -1.5% (linear load) Voltage THD (Total Harmonic Distortion) THD<1%(linear load), THD<6%(nonlinear load) Power Factor 0.9 Crest Factor 3:1 Phase Tolerance 120 ±0.5 (balance and unbalance load) Overload Capability <105%,long time operation; 105%<load<110%, transfer to bypass after 1hour;110%<load<125%, transfer to bypass after 10 minutes 125%<load<150%, transfer to bypass after 1 minute; >150%, transfer to bypass after 200ms System System Efficiency Normal mode: 95%; ECO mode: 98% Mode Efficiency 95% Display LCD+LED and keyboard LCD+LED, Touch screen and keyboard Interface (Communication Ports) RS232,RS485,SNMP card,epo,dry contacts Installation / Connection Terminal block connection Operation Temperature 0-40 C Storage Temperature -40 C~70 C Relative Humidity 0-95% (non-condensing) Noise (db) <55dB Maximum parallel units 4pcs Weight (kg) 31 31 50 52 61 200 250 250 250 250 Dimensions (H x W x D) (mm) 530*250*660 530*250*660 770*250*680 770*250*680 770*250*836 950*600*980 1400*600*980 1400*600*980 1400*600*980 1400*600*980

FEATURES ADVANCED QUALITY True online double conversion topology High input power factor (>0.99), low input THDi (<3%) Strong load adaptability for linear and nonlinear load Intelligent module and system protection design with N+1power module redundancy AVAILABILITY & SCALABILITY Scalable design to increasing power requirements Digital paralleling technology, low circle current sharing between modules (<2%) Hot-swappable power and bypass modules to ensure zero mean time of repair SUSTAINABILITY Extreme efficiency to lower waste energy consumption Low total cost of ownership and carbon footprint Incredible low noise system design APPLICATIONS SME Businesses & Datacenters Mission-critical Applications Computer Room, Service Center Internet Service Provider (ISP), Internet Data Center (IDC) Telecommunication and Network Equipment Other Sensitive Electronics RELIABILITY Integrated IGBT modules instead of discrete components Dual or single AC input connections cold start function All PCBs are protected by conformal coating Independent charger for batteries Intelligent battery management Digital control for whole parts including rectifier, inverter, charger and discharger Each module is configured with independent controller to avoid the risk of single point failure Friendly generator interface MANAGEABILITY Easy operation and installation Totally front access, top and bottom cable connection Inbuilt touch screen LCD for real-time information monitoring and management Remote management capability MULTIFUNCTION LCD CONTROL PANEL With the large touch screen LCD panel, administrators could easily access information including power module or system status, event logging, battery management system and even component diagnose system to easily identify the faulty component during module or system failure. SM200KMF SMART MODULAR THREE-PHASE UPS (20-600KVA) THE EXTREME EFFICIENT REDUNDANT POWER SYSTEM FOR THE PROTECTION OF SENSITIVE EQUIPMENT CyberPower Smart Modular Three-Phase UPS is an online double conversion three-phase UPS delivering complete power protection with the best combination of reliability, functionality, availability and flexibility. Designed to meet the strict power requirements of a wide range of sensitive equipment, the scalable and parallel design allows easy capacity expansion up to 200KVA on a single frame and two frames in parallel to reach the maximum 400KVA with 20KVA power module and up to 600KVA on a single frame and three frames in parallel to reach the maximum 900KVA with 30KVA power module as the needs of your data center grow with time. Smart Modular Three-Phase UPS combines the integrated IGBT technology together with DSP control arithmetic to increase reliability through reduced component while enhancing the extreme efficiency. Along with high input power factor and less than 3% input Total Harmonic Distortion (THDi), this UPS demonstrates a strong load adaptability for all kinds of load while enhancing the low total cost of ownership and carbon footprint. PERFECT OUTPUT POWER Online Double Conversion Topology provides extra layer insulation from disruptive power problems by continuously operating off battery power and delivering clear and consistent pure sine wave output to critical systems. MODULAR CONSTRUCTION DESIGN The Smart Modular Three-Phase UPS is configured for N+1 redundancy to ensure the most extent of availability and productivity. In the event of single power module failure, the load is automatically distributed among remaining modules to avoid the risk of single point failure. Each independent 20kVA power module or 30kVA power module are conveniently hot-swappable for easy power expansion and system maintenance without disrupting connected load. DUAL AC INPUT The dual AC input connection ensures an additional level of redundancy by allowing the secondary source of AC input as the backup supply when the major input source is not available. EXTREME SYSTEM EFFICIENCY Advanced integrated IGBT technology and intelligent DSP-based control ensure a superior operating efficiency up to 98% during Economy Mode. The extreme efficiency helps on saving operating costs by eliminating waste energy consumption and heat generation therefore a more reliable product performance. OPTIONAL ACCESSORIES SNMP Communication Card Dust-proof Net Environmental Sensor Parallel Kit Temperature Compensation Module POWER MODULE PERFORMANCE DIGITAL CONTROL SYSTEM Each power module is configured with two Digital Signal Processor (DSP) boards for digital control. DSP-based control and monitoring system provides intelligent management with great sensitivity to enhance efficiency and reliability while reducing component count. ACTIVE CURRENT SHARING BETWEEN MODULES Each power module is designed for parallel operation with active current sharing. The current difference between two modules is controlled within 2% event step on or step off 100% load hence massively increases the system reliability BATTERY COLD START UNIT When there s no utility power available, the inbuilt battery cold start unit will switch the UPS onto battery power to turn on UPS from the battery. REMOTE MANAGEMENT CAPABILITIES Administrators could access, monitor and perform remote management and configuration of the UPS via standard web browsers or network management system (NMS) through the optional network management card. MONITORING & MANAGEMENT SOFTWARE The included power management software provides real-time monitoring of critical power conditions of the systems. During the event of load interruption, administrators will receive immediate notifications to safely shutdown the operating system in an orderly manner.

SM060KMF TECHNICAL SPECIFICATIONS Model Name SM060KMF SM120KMF SM200KMF SM20KPM Model Brief 3-Module Cabinet 6-Module Cabinet 10-Module Cabinet 20kVA Power Module Configuration Capacity (KVA / KWatts) 60 / 54 120 / 108 200 / 180 20 / 18 Main Input Input Voltage 380V/400V/415V(line to line); 220V/230V/240V(line to neutral) Input Frequency 50/60Hz Power Factor >0.99 Input Voltage Window -40%~+25% Frequency Window 40-70HZ Voltage ±240VDC Charger Power 10%*Power (selectable from 0~20%) Charger Voltage Precision 1.5% Bypass Bypass Voltage 380V/400V/415V, (line to line); 220V/230V/240V, (line to neutral) Bypass Voltage Window -20%-+15%, full load Bypass Overload Capability <125%, long time operation; 125%< load <130%, last for more than 1 hour; 130%<load<150%,last for more than 6 minutes; >1000%, last for more than 100ms Voltage 380V/400V/415V, three phase; 220V/230V/240V, one phase Voltage Precision 1% (balance load),1.5% (unbalance load) Voltage THD (Total Harmonic Distortion) THD<2%(linear load), THD<5%(nonlinear load) Power Factor 0.9 Phase Tolerance 120 ±0.5 (balance and unalance load) Crest Factor 3:1 Overload Capability <105%,long time operation; 105%<load<110%, transfer to bypass after 1hour; 110%<load<125%, transfer to bypass after 10 minutes 125%<load<150%, transfer to bypass after 1 minute; >150%, transfer to bypass after 200ms System System Efficiency Normal mode: 95%; ECO mode: 98% Mode Efficiency 95% Display LCD+LED, Touch screen and keyboard IP Class IP20 Interface (Communication Ports) RS232,RS485,SNMP card,epo,dry contacts,generator interface Installation / Connection Top or bottom cable connection Operation Temperature 0-40 C Storage Temperature -25 C~70 C Relative Tumidity 0-95% (non-comdensing) Noise (db) <55dB Weight (kg) 120 187 214 22.5 Dimensions (H x W x D) (mm) 1100 x 600 x 900 1600 x 600 x 900 2000 x 600 x 900 134 x 440 x 590 TECHNICAL SPECIFICATIONS Model Name SM180KMFX SM300KMFX SM600KMFX SM30KPMX Model Brief 6-Module Cabinet 10-Module Cabinet 20-Module Cabinet 30kVA Power Module Configuration Capacity (KVA / KWatts) 180 / 162 300 / 270 600 / 540 30 / 27 Main Input Input Voltage 380V/400V/415V(line to line); 220V/230V/240V(line to neutral) Input Frequency 50/60Hz Power Factor >0.99 Input Voltage Window -40%~+25% Frequency Window 40-70HZ Voltage ±240VDC Charger Power 10%*Power (selectable from 0~20%) Charger Voltage Precision 1.5% Bypass Bypass Voltage 380V/400V/415V, (line to line); 220V/230V/240V, (line to neutral) Bypass Voltage Window -20%-+15%, full load Bypass Overload Capability <110%, long time operation; 110%< load <125%, last for more than 5 minutes; 125%<load<150%,last for more than 1 minutes; 150%<load<400%,last for more than 1 second; >400%, last for more than 200ms Voltage 380V/400V/415V, three phase; 220V/230V/240V, one phase Voltage Precision +1.5% ~ -1.5% (linear load) Voltage THD (Total Harmonic Distortion) THD<1%(linear load), THD<6%(nonlinear load) Power Factor 0.9 Phase Tolerance 120 ±0.5 (balance and unalance load) Crest Factor 3:1 Overload Capability <105%,long time operation; 105%<load<110%, transfer to bypass after 1hour; 110%<load<125%, transfer to bypass after 10 minutes; 125%<load<150%, transfer to bypass after 1 minute; >150%, transfer to bypass after 200ms System System Efficiency Normal mode: 95%; ECO mode: 98% Mode Efficiency 95% Display LCD+LED, Touch screen and keyboard IP Class IP20 Interface (Communication Ports) RS232,RS485,SNMP card,epo,dry contacts,generator interface Installation / Connection Top or bottom cable connection Operation Temperature 0-40C Storage Temperature -40C~70C Relative Tumidity 0-95% (non-comdensing) Noise (db) <65dB Weight (kg) 170 220 620 34 Dimensions (H x W x D) (mm) 1600*600*1100 2000*600*1100 2000*2000*1100 134*460*790

APPENDIX ACCESSORY Model Name Description STP33 PARLCARD101 Parallel kit for STP3T series UPS 10KVA~30KVA PARLCARD102 Parallel kit for STP3T series UPS 40KVA~120KVA HSTP33 RMDY802 SNMP card with 4-pin connector cable SMTEMP or environment temperature sensor HSTP3TNNPK10_40 Parallel kit for HSTP UPS models of 10KVA~40KVA HSTP3TNNPK60_120 Parallel kit for HSTP UPS models of 60KVA~120KVA RUNTIME Model Name Description MODULAR SM200KDF Accessory Dust Filter SM200KDF SM120KDF Accessory Dust Filter SM120KDF SM060KDF Accessory Dust Filter SM060KDF SMBF18A2BT Modular cabinet without batteries which can have 8 battery trays (Max. 8pcs SMBT9A10) SMBT9A10 Tray SMBT9A10 (9AH * 10PCS inside the battery tray) SMBF36A4BT Modular cabinet without batteries which can have 16 battery trays (Max. 16pcs SMBT9A10) SMBF72A8BT Modular cabinet without batteries which can have 32 battery trays (Max. 32pcs SMBT9A10) PARLCARD201 Parallel kit for SM series UPS cabinet OLS 3S 15K Model / Watts spec. Half load Full load 1300W 2700W 4000W 5400W 6700W 8100W 9400W 10800W 12100W 13500W OLS3S15KE 12V/9AH x 20 x 2 17.6 6.4 124.8 60.0 35.5 24.5 17.9 14.6 11.8 8.8 7.5 6.4 OLS3S15KE +1BP 12V/9AH x 20 x 4 35.3 12.8 249.6 120.1 71.0 49.0 35.8 29.2 23.7 17.6 15.1 12.8 OLS3S15KE +2BP 12V/9AH x 20 x 6 52.9 19.2 374.4 180.1 106.5 73.5 53.7 43.8 35.5 26.4 22.6 19.2 OLS3S15KE +3BP 12V/9AH x 20 x 8 70.5 25.6 499.2 240.1 142.0 98.1 71.6 58.4 47.4 35.2 30.2 25.6 OLS3S15KE +4BP 12V/9AH x 20 x 10 88.1 32 624.0 300.2 177.5 122.6 89.5 73.0 59.2 44.0 37.7 32.0 OLS3S15KE +5BP 12V/9AH x 20 x 12 105.8 38.4 748.8 360.2 213.0 147.1 107.3 87.6 71.0 52.8 45.3 38.4 OLS3S15KE +6BP 12V/9AH x 20 x 14 123.4 44.8 873.7 420.3 248.5 171.6 125.2 102.2 82.9 61.6 52.8 44.8 OLS3S15KE +7BP 12V/9AH x 20 x 16 141 51.2 998.5 480.3 284.0 196.1 143.1 116.7 94.7 70.4 60.4 51.2 OLS3S15KE +8BP 12V/9AH x 20 x 18 158.6 57.6 1123.3 540.3 319.5 220.6 161.0 131.3 106.5 79.3 67.9 57.6 OLS3S15KE +9BP 12V/9AH x 20 x 20 176.3 64 1248.1 600.4 355.0 245.2 178.9 145.9 118.4 88.1 75.5 64.0 OLS3S15KE +10BP 12V/9AH x 20 x 22 193.9 70.4 1372.9 660.4 390.5 269.7 196.8 160.5 130.2 96.9 83.0 70.4 OLS3S15KE +11BP 12V/9AH x 20 x 24 211.5 76.8 1497.7 720.4 426.0 294.2 214.7 175.1 142.1 105.7 90.5 76.8 OLS3S15KE +12BP 12V/9AH x 20 x 26 229.2 83.2 1622.5 780.5 461.5 318.7 232.6 189.7 153.9 114.5 98.1 83.2 OLS3S15KE +13BP 12V/9AH x 20 x 28 246.8 89.6 1747.3 840.5 497.0 343.2 250.5 204.3 165.7 123.3 105.6 89.6 OLS3S15KE +14BP 12V/9AH x 20 x 30 264.4 96 1872.1 900.6 532.5 367.7 268.4 218.9 177.6 132.1 113.2 96.0 OLS3S15KE +15BP 12V/9AH x 20 x 32 282 102.4 1996.9 960.6 568.0 392.2 286.2 233.5 189.4 140.9 120.7 102.4 OLS3S15KEXL +1BP 12V/9AH x 20 x 2 17.6 6.4 124.8 60.0 35.5 24.5 17.9 14.6 11.8 8.8 7.5 6.4 OLS3S15KEXL +2BP 12V/9AH x 20 x 4 35.3 12.8 249.6 120.1 71.0 49.0 35.8 29.2 23.7 17.6 15.1 12.8 OLS3S15KEXL +3BP 12V/9AH x 20 x 6 52.9 19.2 374.4 180.1 106.5 73.5 53.7 43.8 35.5 26.4 22.6 19.2 OLS3S15KEXL +4BP 12V/9AH x 20 x 8 70.5 25.6 499.2 240.1 142.0 98.1 71.6 58.4 47.4 35.2 30.2 25.6 OLS3S15KEXL +5BP 12V/9AH x 20 x 10 88.1 32 624.0 300.2 177.5 122.6 89.5 73.0 59.2 44.0 37.7 32.0 OLS3S15KEXL +6BP 12V/9AH x 20 x 12 105.8 38.4 748.8 360.2 213.0 147.1 107.3 87.6 71.0 52.8 45.3 38.4 OLS3S15KEXL +7BP 12V/9AH x 20 x 14 123.4 44.8 873.7 420.3 248.5 171.6 125.2 102.2 82.9 61.6 52.8 44.8 OLS3S15KEXL +8BP 12V/9AH x 20 x 16 141 51.2 998.5 480.3 284.0 196.1 143.1 116.7 94.7 70.4 60.4 51.2 OLS3S15KEXL +9BP 12V/9AH x 20 x 18 158.6 57.6 1123.3 540.3 319.5 220.6 161.0 131.3 106.5 79.3 67.9 57.6 OLS3S15KEXL +10BP 12V/9AH x 20 x 20 176.3 64 1248.1 600.4 355.0 245.2 178.9 145.9 118.4 88.1 75.5 64.0 OLS3S15KEXL +11BP 12V/9AH x 20 x 22 193.9 70.4 1372.9 660.4 390.5 269.7 196.8 160.5 130.2 96.9 83.0 70.4 OLS3S15KEXL +12BP 12V/9AH x 20 x 24 211.5 76.8 1497.7 720.4 426.0 294.2 214.7 175.1 142.1 105.7 90.5 76.8 OLS3S15KEXL +13BP 12V/9AH x 20 x 26 229.2 83.2 1622.5 780.5 461.5 318.7 232.6 189.7 153.9 114.5 98.1 83.2 OLS3S15KEXL +14BP 12V/9AH x 20 x 28 246.8 89.6 1747.3 840.5 497.0 343.2 250.5 204.3 165.7 123.3 105.6 89.6 OLS3S15KEXL +15BP 12V/9AH x 20 x 30 264.4 96 1872.1 900.6 532.5 367.7 268.4 218.9 177.6 132.1 113.2 96.0 OLS 3S 20K Model / Watts spec. Half load Full load 1800W 3600W 5400W 7200W 9000W 10800W 12600W 14400W 16200W 18000W OLS3S20KE 12V/9AH x 20 x 2 12.8 1.5 92.9 40.7 24.5 16.1 12.8 8.8 6.9 6.0 2.0 1.5 OLS3S20KE +1BP 12V/9AH x 20 x 4 30.9 12.8 169.8 92.9 60.0 40.7 30.9 24.5 20.6 16.1 14.6 12.8 OLS3S20KE +2BP 12V/9AH x 20 x 6 51.2 21.8 278.6 122.0 92.9 69.3 51.2 40.7 35.2 28.4 24.5 21.8 OLS3S20KE +3BP 12V/9AH x 20 x 8 72.3 30.9 339.5 169.8 120.1 92.9 72.3 60.0 49.8 40.7 35.2 30.9 OLS3S20KE +4BP 12V/9AH x 20 x 10 92.9 40.7 464.3 203.4 142.5 107.8 92.9 76.5 65.3 55.0 47.6 40.7 OLS3S20KE +5BP 12V/9AH x 20 x 12 104.3 51.2 > 8 hrs 278.6 169.8 122.0 104.3 92.9 80.8 69.3 60.0 51.2 OLS3S20KE +6BP 12V/9AH x 20 x 14 116.3 61.8 > 8 hrs 284.7 202.7 145.3 116.3 102.3 92.9 81.1 71.2 61.8 OLS3S20KE +7BP 12V/9AH x 20 x 16 142.5 72.3 > 8 hrs 339.5 240.1 169.8 142.5 111.7 105.3 92.9 82.4 72.3 OLS3S20KE +8BP 12V/9AH x 20 x 18 156.2 82.6 > 8 hrs 366.1 278.6 187.4 156.2 122.0 115.5 100.4 92.9 82.6 OLS3S20KE +9BP 12V/9AH x 20 x 20 169.8 92.9 > 8 hrs 464.3 300.2 203.4 169.8 142.5 125.7 107.8 100.1 92.9 OLS3S20KE +10BP 12V/9AH x 20 x 22 380.1 98.6 > 8 hrs > 8 hrs 315.6 238.9 380.1 156.2 137.0 114.9 106.7 98.6 OLS3S20KE +11BP 12V/9AH x 20 x 24 210.3 104.3 > 8 hrs > 8 hrs 339.5 278.6 210.3 169.8 148.3 122.0 113.2 104.3 OLS3S20KE +12BP 12V/9AH x 20 x 26 221.1 110.3 > 8 hrs > 8 hrs 378.8 297.3 221.1 186.3 159.1 134.9 121.9 110.3 OLS3S20KE +13BP 12V/9AH x 20 x 28 231.8 116.3 > 8 hrs > 8 hrs 412.9 327.9 231.8 202.7 169.8 147.8 130.5 116.3 OLS3S20KE +14BP 12V/9AH x 20 x 30 278.6 122.0 > 8 hrs > 8 hrs 464.3 338.5 278.6 203.4 181.0 160.7 142.5 122.0 OLS3S20KEXL +1BP 12V/9AH x 20 x 2 12.8 1.5 92.9 40.7 24.5 16.1 12.8 8.8 6.9 6.0 2.0 1.5 OLS3S20KEXL +2BP 12V/9AH x 20 x 4 30.9 12.8 169.8 92.9 60.0 40.7 30.9 24.5 20.6 16.1 14.6 12.8 OLS3S20KEXL +3BP 12V/9AH x 20 x 6 51.2 21.8 278.6 122.0 92.9 69.3 51.2 40.7 35.2 28.4 24.5 21.8 OLS3S20KEXL +4BP 12V/9AH x 20 x 8 72.3 30.9 339.5 169.8 120.1 92.9 72.3 60.0 49.8 40.7 35.2 30.9 OLS3S20KEXL +5BP 12V/9AH x 20 x 10 92.9 40.7 464.3 203.4 142.5 107.8 92.9 76.5 65.3 55.0 47.6 40.7 OLS3S20KEXL +6BP 12V/9AH x 20 x 12 104.3 51.2 > 8 hrs 278.6 169.8 122.0 104.3 92.9 80.8 69.3 60.0 51.2 OLS3S20KEXL +7BP 12V/9AH x 20 x 14 116.3 61.8 > 8 hrs 284.7 202.7 145.3 116.3 102.3 92.9 81.1 71.2 61.8 OLS3S20KEXL +8BP 12V/9AH x 20 x 16 142.5 72.3 > 8 hrs 339.5 240.1 169.8 142.5 111.7 105.3 92.9 82.4 72.3 OLS3S20KEXL +9BP 12V/9AH x 20 x 18 156.2 82.6 > 8 hrs 366.1 278.6 187.4 156.2 122.0 115.5 100.4 92.9 82.6 OLS3S20KEXL +10BP 12V/9AH x 20 x 20 169.8 92.9 > 8 hrs 464.3 300.2 203.4 169.8 142.5 125.7 107.8 100.1 92.9 OLS3S20KEXL +11BP 12V/9AH x 20 x 22 380.1 98.6 > 8 hrs > 8 hrs 315.6 238.9 380.1 156.2 137.0 114.9 106.7 98.6 OLS3S20KEXL +12BP 12V/9AH x 20 x 24 210.3 104.3 > 8 hrs > 8 hrs 339.5 278.6 210.3 169.8 148.3 122.0 113.2 104.3 OLS3S20KEXL +13BP 12V/9AH x 20 x 26 221.1 110.3 > 8 hrs > 8 hrs 378.8 297.3 221.1 186.3 159.1 134.9 121.9 110.3 OLS3S20KEXL +14BP 12V/9AH x 20 x 28 231.8 116.3 > 8 hrs > 8 hrs 412.9 327.9 231.8 202.7 169.8 147.8 130.5 116.3 OLS3S20KEXL +15BP 12V/9AH x 20 x 30 278.6 122.0 > 8 hrs > 8 hrs 464.3 338.5 278.6 203.4 181.0 160.7 142.5 122.0 XL models do not have inbuilt battery,and requires at least 1 EBP to work. Only OLS 15k/20k units for selected regions are able to connect more than 4 EBPs. Please refer to the sheet "Max. EBP of OLS" for more details. * Runtime is in mins STP MODELS WITH INBUILT BATTERY 15kVA - STP3T15KEBC (with 9AH battery *40 pcs inside) 675W 1350W 2025W 2700W 3375W 4050W 4725W 5400W 6075W 6750W 300 min 160 min 90 min 50 min 35 min 25 min 23 min 21 min 20 min 18 min STP3T15KEBC (9AH) 7425W 8100W 8775W 9450W 10125W 10800W 11475W 12150W 12825W 13500W 16 min 15 min 13 min 11 min 10 min 9 min 8 min 7 min 6 min 5 min 20kVA - STP3T20KEBC (with 12AH battery *40 pcs inside) 300 min 150 min 90 min 50 min 35 min 29 min 25 min 22 mins 20 min 18 min STP3T20KEBC (12AH) 16 min 15 min 12 min 10 min 9 min 8 min 7.5 min 7 min 6 min 5.5 min 30kVA - STP3T30KEBC (with 12AH battery *40 pcs inside) 300 min 150 min 90 min 50 min 35 min 29 min 25 min 22 mins 20 min 18 min STP3T30KEBC (12AH) 16 min 14 min 12 min 10 min 9 min 8 min 7.5 min 7 min 6.5 min 6 min 18.9KW 19.8KW 20.7KW 21.6KW 22.5KW 23.4KW 24.3KW 25.2KW 26.1KW 27KW 5 min < 5 min < 5 min < 5 min < 5 min < 5 min < 5 min < 5 min < 5 min < 5 min THE RECOMMENDED COMBINATION OF BATTERY CAPACITY AND STP MODEL IS AS BELOW TABLE STP 80K STP 60K STP 40K STP 30K STP 20K STP 15K 65AH V V 40AH V V V V 20AH V V V V 80kVA - STP3T80KE Total Watt 9KW 18KW 27KW 36KW 45KW 54KW 63KW 72KW + SMBF65 (65AH) * 1 165 min 58 min 30 min 23 min 19 min 16 min 12 min 9 min + SMBF65 (65AH) * 2 350 min 165 min 100 min 58 min 42 min 30 min 25 min 22 min + SMBF65 (65AH) * 3 >480 min 225 min 165 min 120 min 82 min 58 min 46 min 39 min + SMBF65 (65AH) * 4 >480 min 350 min 205 min 165 min 125 min 100 min 76 min 58 min + SMBF40_26 (40AH) * 1 85 min 28 min 20 min 15 min 9 min 6.5 min 5 min < 5 min + SMBF40_26 (40AH) * 2 200 min 85 min 44 min 28 min 23 min 20 min 17 min 15 min + SMBF40_26 (40AH) * 3 305 min 155 min 85 min 52 min 37 min 28 min 24 min 22 min + SMBF40_26 (40AH) * 4 470 min 195 min 135 min 85 min 57 min 44 min 33 min 28 min 60kVA - STP3T60KE Total Watt 9KW 18KW 27KW 36KW 45KW 54KW + SMBF65 (65AH) * 1 165 min 58 min 30 min 23 min 19 min 16 min + SMBF65 (65AH) * 2 350 min 165 min 100 min 58 min 42 min 30 min + SMBF65 (65AH) * 3 >480 min 255 min 165 min 120 min 82 min 58 min + SMBF65 (65AH) * 4 >480 min 305 min 205 min 165 min 125 min 100 min + SMBF40_26 (40AH) * 1 85 min 28 min 20 min 15 min 9 min 6.5 min + SMBF40_26 (40AH) * 2 200 min 85 min 44 min 28 min 23 min 20 min + SMBF40_26 (40AH) * 3 305 min 155 min 85 min 52 min 37 min 28 min + SMBF40_26 (40AH) * 4 470 min 195 min 135 min 85 min 57 min 44 min 40kVA - STP3T40KE Total Watt 9KW 18KW 27KW 36KW + SMBF40_26 (40AH) * 1 85 min 28 min 20 min 15 min + SMBF40_26 (40AH) * 2 200 min 85 min 44 min 28 min + SMBF40_26 (40AH) * 3 305 min 155 min 85 min 52 min + SMBF40_26 (40AH) * 4 470 min 195 min 135 min 85 min + SMBF20_17 (20AH) * 1 27 min 15 min 6.5 min < 5 min + SMBF20_17 (20AH) * 2 85 min 27 min 20 min 15 min + SMBF20_17 (20AH) * 3 150 min 52 min 27 min 21 min + SMBF20_17 (20AH) * 4 195 min 85 min 44 min 27 min 30kVA - STP3T30KE Total Watt 9KW 18KW 27KW + SMBF40_26 (40AH) * 1 85 min 28 min 20 min + SMBF40_26 (40AH) * 2 200 min 85 min 44 min + SMBF40_26 (40AH) * 3 305 min 155 min 85 min + SMBF40_26 (40AH) * 4 470 min 195 min 135 min + SMBF20_17 (20AH) * 1 27 min 15 min 6.5 min + SMBF20_17 (20AH) * 2 85 min 27 min 20 min + SMBF20_17 (20AH) * 3 150 min 52 min 27 min + SMBF20_17 (20AH) * 4 195 min 85 min 44 min 20kVA - STP3T20KE Total Watt 9KW 18KW + SMBF20_17 (20AH) * 1 27 min 15 min + SMBF20_17 (20AH) * 2 85 min 27 min + SMBF20_17 (20AH) * 3 150 min 52 min + SMBF20_17 (20AH) * 4 195 min 85 min 15kVA - STP3T15KE Total Watt 6.75KW 13.5KW + SMBF20_17 (20AH) * 1 45 min 20 min + SMBF20_17 (20AH) * 2 120 min 45 min + SMBF20_17 (20AH) * 3 195 min 85 min + SMBF20_17 (20AH) * 4 240 min 135 min STP3T40KE+SMBF18A2BT 1. The data which backup time is more than 8 hours ( green cells ) is not available because it is already out of the calculable range of battery spec data. 2. Please DO NOT use the combination whose runtime is less than 5 mins ( bule cells ) because the sudden high discharge current may damage the battery and dramatically shorten the life span of battery.

HSTP MODELS WITH INBUILT BATTERY 10kVA - HSTP3T10KEBC (with 9AH battery *40 pcs inside) HSTP3T10KEBC (9AH) 210 min 90 min 50 min 30 min 25 min 22 min 20 min 17 min 15 min 12 min 15kVA - HSTP3T15KEBC (with 9AH battery *40 pcs inside) 675W 1350W 2025W 2700W 3375W 4050W 4725W 5400W 6075W 6750W HSTP3T15KEBC (9AH) 300 min 160 min 90 min 50 min 35 min 25 min 23 min 21 min 20 min 18 min 7425W 8100W 8775W 9450W 10125W 10800W 11475W 12150W 12825W 13500W 16 min 15 min 13 min 11 min 10 min 9 min 8 min 7 min 6 min 5 min 20kVA - HSTP3T20KEBC (with 12AH battery *40 pcs inside) HSTP3T20KEBC (12AH) 300 min 150 min 90 min 50 min 35 min 29 min 25 min 22 mins 20 min 18 min 16 min 15 min 12 min 10 min 9 min 8 min 7.5 min 7 min 6 min 5.5 min 30kVA - HSTP3T30KEBC (with 12AH battery *40 pcs inside) 300 min 150 min 90 min 50 min 35 min 29 min 25 min 22 mins 20 min 18 min HSTP3T30KEBC (12AH) 16 min 15 min 12 min 10 min 9 min 8 min 7.5 min 7 min 6 min 5.5 min 18.9KW 19.8KW 20.7KW 21.6KW 22.5KW 23.4KW 24.3KW 25.2KW 26.1KW 27KW 5 min < 5 min < 5 min < 5 min < 5 min < 5 min < 5 min < 5 min < 5 min < 5 min 40kVA - HSTP3T40KEBC (with 12AH battery *80 pcs inside) >480 min 300 min 190 min 150 min 120 min 80 min 60 min 52 min 42 min 36 min HSTP3T40KEBC (24AH) 30 min 28 min 26 min 25 min 23 min 22 min 21 min 20 min 19 min 18 min 18.9KW 19.8KW 20.7KW 21.6KW 22.5KW 23.4KW 24.3KW 25.2KW 26.1KW 27KW 17 min 17 min 16 min 15 min 14 min 13 min 12 min 11 min 10 min 9 min 27.9KW 28.8KW 29.7KW 30.6KW 31.5KW 32.4KW 33.3KW 34.2KW 35.1KW 36KW 9 min 8 min 8 min 7 min 7 min 6 min 6 min 5 min 5 min 5 min THE RECOMMENDED COMBINATION OF BATTERY CAPACITY AND HSTP MODEL IS AS BELOW TABLE HSTP 120K HSTP 100K HSTP 90K HSTP 80K HSTP 60K HSTP 40K HSTP 30K HSTP 20K HSTP 15K HSTP 10K 65AH V V V V V 40AH V V V V 20AH V V V V V 120kVA - HSTP3T120KE Total Watt 9KW 18KW 27KW 36KW 45KW 54KW 63KW 72KW 81KW 90KW 99KW 108KW + SMBF65 (65AH) * 1 165 min 58 min 30 min 23 min 19 min 16 min 12 min 9 min 7 min 6 min 5 min < 5 min + SMBF65 (65AH) * 2 350 min 165 min 100 min 58 min 42 min 30 min 25 min 22 min 20 min 19 min 17 min 16 min + SMBF65 (65AH) * 3 >480 min 225 min 165 min 120 min 82 min 58 min 46 min 39 min 30 min 26 min 24 min 22 min + SMBF65 (65AH) * 4 >480 min 350 min 205 min 165 min 125 min 100 min 76 min 58 min 50 min 42 min 35 min 30 min 100kVA - HSTP3T100KE Total Watt 9KW 18KW 27KW 36KW 45KW 54KW 63KW 72KW 81KW 90KW + SMBF65 (65AH) * 1 165 min 58 min 30 min 23 min 19 min 16 min 12 min 9 min 7 min 6 min + SMBF65 (65AH) * 2 350 min 165 min 100 min 58 min 42 min 30 min 25 min 22 min 20 min 19 min + SMBF65 (65AH) * 3 >480 min 225 min 165 min 120 min 82 min 58 min 46 min 39 min 30 min 26 min + SMBF65 (65AH) * 4 >480 min 350 min 205 min 165 min 125 min 100 min 76 min 58 min 50 min 42 min 90kVA - HSTP3T90KE Total Watt 9KW 18KW 27KW 36KW 45KW 54KW 63KW 72KW 81KW + SMBF65 (65AH) * 1 165 min 58 min 30 min 23 min 19 min 16 min 12 min 9 min 7 min + SMBF65 (65AH) * 2 350 min 165 min 100 min 58 min 42 min 30 min 25 min 22 min 20 min + SMBF65 (65AH) * 3 >480 min 225 min 165 min 120 min 82 min 58 min 46 min 39 min 30 min + SMBF65 (65AH) * 4 >480 min 350 min 205 min 165 min 125 min 100 min 76 min 58 min 50 min 80kVA - HSTP3T80KE Total Watt 9KW 18KW 27KW 36KW 45KW 54KW 63KW 72KW + SMBF65 (65AH) * 1 165 min 58 min 30 min 23 min 19 min 16 min 12 min 9 min + SMBF65 (65AH) * 2 350 min 165 min 100 min 58 min 42 min 30 min 25 min 22 min + SMBF65 (65AH) * 3 >480 min 225 min 165 min 120 min 82 min 58 min 46 min 39 min + SMBF65 (65AH) * 4 >480 min 350 min 205 min 165 min 125 min 100 min 76 min 58 min + SMBF40_26 (40AH) * 1 85 min 28 min 20 min 15 min 9 min 6.5 min 5 min < 5 min + SMBF40_26 (40AH) * 2 200 min 85 min 44 min 28 min 23 min 20 min 17 min 15 min + SMBF40_26 (40AH) * 3 305 min 155 min 85 min 52 min 37 min 28 min 24 min 22 min + SMBF40_26 (40AH) * 4 470 min 195 min 135 min 85 min 57 min 44 min 33 min 28 min 40kVA - HSTP3T40KE Total Watt 9KW 18KW 27KW 36KW + SMBF40_26 (40AH) * 1 85 min 28 min 20 min 15 min + SMBF40_26 (40AH) * 2 200 min 85 min 44 min 28 min + SMBF40_26 (40AH) * 3 305 min 155 min 85 min 52 min + SMBF40_26 (40AH) * 4 470 min 195 min 135 min 85 min + SMBF20_17 (20AH) * 1 27 min 15 min 6.5 min < 5 min + SMBF20_17 (20AH) * 2 85 min 27 min 20 min 15 min + SMBF20_17 (20AH) * 3 150 min 52 min 27 min 21 min + SMBF20_17 (20AH) * 4 195 min 85 min 44 min 27 min 20kVA - HSTP3T20KE Total Watt 9KW 18KW + SMBF20_17 (20AH) * 1 27 min 15 min + SMBF20_17 (20AH) * 2 85 min 27 min + SMBF20_17 (20AH) * 3 150 min 52 min + SMBF20_17 (20AH) * 4 195 min 85 min MODULE (20KVA) 200kVA Module Frame No. of Power Module 1 2 3 4 5 6 7 8 9 10 Total Watt 18KW 36KW 54KW 72KW 90KW 108KW 126KW 144KW 162KW 180KW SM200KMF + SMBF65 (65AH) * 1 58 min 23 min 16 min 10 min 6 min < 5 min < 5 min < 5 min < 5 min < 5 min SM200KMF + SMBF65 (65AH) * 2 170 min 58 min 30 min 23 min 19 min 16 min 13 min 10 min 8 min 6 min SM200KMF + SMBF65 (65AH) * 3 225 min 120 min 58 min 40 min 27 min 23 min 20 min 18 min 16 min 14 min SM200KMF + SMBF65 (65AH) * 4 345 min 170 min 100 min 58 min 50 min 30 min 26 min 23 min 21 min 19 min 120kVA Module Frame No. of Power Module 1 2 3 4 5 6 Total Watt 18KW 36KW 54KW 72KW 90KW 108KW SM120KMF + SMBF40_26 (26AH) * 1 19 min 6 min < 5 min < 5 min < 5 min < 5 min SM120KMF + SMBF40_26 (26AH) * 2 42 min 19 min 12 min 6 min < 5 min < 5 min SM120KMF + SMBF40_26 (26AH) * 3 80 min 27 min 19 min 14 min 9 min 6 min SM120KMF + SMBF40_26 (40AH) * 1 28 min 15 min 7 min < 5 min < 5 min < 5 min SM120KMF + SMBF40_26 (40AH) * 2 90 min 28 min 19 min 14 min 9 min 7 min SM120KMF + SMBF40_26 (40AH) * 3 150 min 52 min 28 min 22 min 17 min 14 min * Please DO NOT use the combination whose runtime time is less than 5 mins ( bule cells ) because the sudden high discharge current may damage the battery and dramatically shorten the life span of battery. MODULE (30KVA) 300kVA Module Frame 15kVA - HSTP3T15KE Total Watt 6.75KW 13.5KW + SMBF20_17 (20AH) * 1 45 min 20 min + SMBF20_17 (20AH) * 2 120 min 45 min + SMBF20_17 (20AH) * 3 195 min 85 min + SMBF20_17 (20AH) * 4 240 min 135 min 30kVA - HSTP3T30KE Total Watt 9KW 18KW 27KW + SMBF40_26 (40AH) * 1 85 min 28 min 20 min + SMBF40_26 (40AH) * 2 200 min 85 min 44 min + SMBF40_26 (40AH) * 3 305 min 155 min 85 min + SMBF40_26 (40AH) * 4 470 min 195 min 135 min + SMBF20_17 (20AH) * 1 27 min 15 min 6.5 min + SMBF20_17 (20AH) * 2 85 min 27 min 20 min + SMBF20_17 (20AH) * 3 150 min 52 min 27 min + SMBF20_17 (20AH) * 4 195 min 85 min 44 min 1. The data which backup time is more than 8 hours ( green cells ) is not available because it is already out of the calculable range of battery spec data. 2. Please DO NOT use the combination whose runtime is less than 5 mins ( bule cells ) because the sudden high discharge current may damage the battery and dramatically shorten the life span of battery. 10kVA - HSTP3T10KE Total Watt 9KW + SMBF20_17 (20AH) * 1 27 min + SMBF20_17 (20AH) * 2 85 min + SMBF20_17 (20AH) * 3 150 min + SMBF20_17 (20AH) * 4 195 min 60kVA Module Frame No. of Power Module 1 2 3 Total Watt 18KW 36KW 54KW SM060KMF + SMBF20_17 (17AH) * 1 10 min < 5 min < 5 min SM060KMF + SMBF20_17 (17AH) * 2 24 min 10 min 5 min SM060KMF + SMBF20_17 (17AH) * 3 41 min 18 min 10 min SM060KMF + SMBF20_17 (20AH) * 1 15 min < 5 min < 5 min SM060KMF + SMBF20_17 (20AH) * 2 28 min 14 min 6 min SM060KMF + SMBF20_17 (20AH) * 3 52 min 21 min 15 min SM060KMF + SMBF20_17 (20AH) * 4 90 min 28 min 19 min 6000kVA Module Frame No. of Power Module 1 2 3 4 5 6 7 8 9 10 Total Watt 54kW 108kW 162kW 216kW 270kW 324kW 378kW 432kW 486kW 540kW SM600KMFX + SMBF65 (65AH) * 2 31 min 15 min 8 min 6 min 5 min - - - - - SM600KMFX + SMBF65 (65AH) * 3 64 min 23 min 15 min 11 min 9 min 7 min 6 min 6 min 5 min 4 min SM600KMFX + SMBF65 (65AH) * 4 108 min 38 min 20 min 15 min 12 min 10 min 8 min 7 min 7 min 6 min No. of Power Module 1 2 3 4 5 6 7 8 9 10 Total Watt 27KW 54KW 81KW 108KW 135KW 162KW 189KW 216KW 243KW 270KW SM300KMFX + SMBF65 (65AH) * 1 43 min 15 min 8 min 6 min 5 min 4 min - - - - SM300KMFX + SMBF65 (65AH) * 2 110 min 31 min 20 min 15 min 11 min 8 min 7 min 6 min 5 min 4 min SM300KMFX + SMBF65 (65AH) * 3 151 min 64 min 30 min 23 min 18 min 15 min 13 min 11 min 10 min 9 Min SM300KMFX + SMBF65 (65AH) * 4 237 min 108 min 51 min 38 min 24 min 20 min 17 min 15 min 13 min 12 min 180kVA Module Frame No. of Power Module 1 2 3 4 5 6 7 8 9 10 Total Watt 16kW 32kW 49kW 65kW 81kW 97kW 113kW 130kW 146kW 162kW SM180KMFX + SMBF65 (65AH) * 1 72 min 25 min 17 min 12 min 8 min 5.5 min - - - - SM180KMFX + SMBF65 (65AH) * 2 185 min 72 min 35 min 25 min 20 min 17 min 15 min 12 min 10 min 8 min SM180KMFX + SMBF65 (65AH) * 3 255 min 135 min 72 min 44 min 30 min 25 min 22 min 19 min 17 min 15 min SM180KMFX + SMBF65 (65AH) * 4 400 min 185 min 122 min 72 min 52 min 35 min 28 min 25 min 22 min 20 min * Please DO NOT use the combination whose runtime time is less than 5 mins ( bule cells ) because the sudden high discharge current may damage the battery and dramatically shorten the life span of battery. 60kVA - HSTP3T60KE Total Watt 9KW 18KW 27KW 36KW 45KW 54KW + SMBF65 (65AH) * 1 165 min 58 min 30 min 23 min 19 min 16 min + SMBF65 (65AH) * 2 350 min 165 min 100 min 58 min 42 min 30 min + SMBF65 (65AH) * 3 >480 min 255 min 165 min 120 min 82 min 58 min + SMBF65 (65AH) * 4 >480 min 305 min 205 min 165 min 125 min 100 min + SMBF40_26 (40AH) * 1 85 min 28 min 20 min 15 min 9 min 6.5 min + SMBF40_26 (40AH) * 2 200 min 85 min 44 min 28 min 23 min 20 min + SMBF40_26 (40AH) * 3 305 min 155 min 85 min 52 min 37 min 28 min + SMBF40_26 (40AH) * 4 470 min 195 min 135 min 85 min 57 min 44 min HSTP3T30KEBC