V55A,B FLANGED LINEAR VALVE PN16 AND PN25/4 GENERAL These threeport mixing valves are used for modulating control of hot/chilled water or steam in heating, ventilation, and air conditioning systems and can be operated by electric linear s ML642/ML6425, ML742/ML7425, and ML6421/ML7421 or by pneumatic MP953. SPECIFICATION DATA FEATURES Cast iron body with flanged end connections Low seat leakage rate Metaltometal seating for long life span Selfadjusting packing Accurate positioning to ensure stateoftheart temperature control Easy mounting of directcoupled electric and pneumatic s Constant total flow throughout entire plug travel SPECIFICATIONS Action Stem up to close port AAB Nominal pressure rating PN16, PN25/4 Flow characteristic linear for ports AAB and BAB Rangeability 5:1 Leakage rate.1 % of k VS port AAB.1 % of k VS port BAB Stroke 2 mm 15...8 38 mm...15 Valve body End connections Flanged per ISO 752 Material Cast iron (GG25) PN16 Cast steel (GSC25) PN25/4 Dimensions See Fig. 1. Trim Seat Stainless steel, replaceable Plug Stainless steel, skirt guided Stem Stainless steel Packing Springloaded PTFE Vrings Medium temperature and max. pressure PN16 2... C; max. kpa... 15 C; max. 144 kpa 15... 2 C; max. 128 kpa 2... C; max. kpa PN25/4 2... C; max. 4 kpa... 15 C; max. 392 kpa 15... 2 C; max. 38 kpa 2... C; max. 372 kpa Maximum temperature differential in alternating hot/cold water use 6 K U.S Registered Trademark ENB413GE51 R88 Copyright 28 Honeywell Inc. All Rights Reserved
SIZES AND FLOW CAPACITIES Order Number Valve Size k VS V55A1124 15 2.5 V55A1132 15 4. V55A114 2 6.3 V55A1157 25 1. V55A1165 32 16. V55A1173 PN25/4 4 25. V55A1181 5 4. V55A1199 65 63. V55A7 8. V55A1215. V55B1155*. V55A19. V55A118 125 25. V55A1116 15 36. PN16 V55B164*. V55B172* 125 25. V55B18* 15 36. * Reverse acting valve, only available on special request. INSTALLATION Water should meet VDI 235 requirements. Do not install valve with stem below the horizontal. Fluid flow must correspond with the arrow direction on the valve body. The installation of a strainer is strongly recommended. REPAIR PACKING KIT Part No.: R 43 176 755 4 (15...8) R 43 176 755 5 (...15) ACTUATORS Electric Actuators valve size model 6 N ML642A ML742A 158 Pneumatic Actuators 6 N spring return ML6425A,B ML7425A,B 158 ML6421A ML6421A 18 N valve action size model size direct reverse MP953A 5, 8 x MP953B 7 x 158 MP953C 5, 8 x MP953D 7 x 15 ML6421B ML6421B positioner yes no MP953A 13 x yes 15 MP953C 13 x no ENB413GE51 R88 2
CLOSE OFF PRESSURE RATINGS in kpa Electric Actuators valve size model force 15 2 25 32 4 5 65 8 125 15 ML642A, ML6425A,B ML742A, ML7425A,B 6 N 6 35 2 5 ML6421A,B ML7421A,B 18 N 25 25 25 2 13 75 5 23 23 9 9 Pneumatic Actuators valve size model spring range air pressure in closed valve seat 15 2 25 32 4 5 65 8 125 15 MP953 A,C; (5 ) 41 41 41 7 23 MP953 C; (5 ) 5583 kpa (812 PSI) 55 55 55 31 11 18 5 MP953C; (8 ) 1448 kpa (27 PSI) 37 37 37 2 11 4 57 MP953A,C; (8 ) 98 15 98 15 98 15 57 89 34 54 18 29 18 4 8 MP953C; (8 ) 5583 kpa (812 PSI) kpa 115 kpa upper lower 1 1 1 13 7 82 42 45 28 13 14 6 MP953C; (13 ) 1448 kpa (27 PSI) 9 62 3 25 3 25 MP953A,C; (13 ) 23 32 9 9 MP953D; (7 ) 88 53 88 53 88 53 51 3 3 17 8 9 4 MP953B,D; (7 ) 559 kpa (813 PSI) 68 13 68 13 68 13 39 8 23 44 11 26 6 2 7 3 ENB413GE51 R88
DIMENSIONS Valve Electric Actuators 135x(161) 67.4 stroke Y1,2,3 B Y1 Y2 Without stem extension for ML642/25 ML742/25 M6421, M7421 MP953A,C 5 MP953B,D With stem extension for MP953A,C 8 Y3 With stem extension for MP953A,C 13 242 135x(161) 67.4 233 C 322 (with HighTemperature Kit: 42 mm) 284 364 (with HighTemperature Kit: 444 mm) 141 141 A Fig. 1. V55A,B (dimensions in mm) ML642A / ML742A ML6425A,B / ML7425A,B Fig. 2. ML642A / ML742A, ML6425A,B / ML7425A,B valve size A B C Y 1 * Y 2 * Y 3 * 15 13 2 15 126 25 32 18 135 4 2 14 17 151 5 23 155 15 65 29 165 8 31 181 35 184 125 4 245 17.5 227 219 15 48 27 * = Adjustment dimension. Port AAB closed. 64 178x (178) 36 Two knockouts are provided for cable fitting: 21.2 (PG13.5) / 22.8 (PG16), 18.9 (PG11) 142 239 264 Fig. 3. ML6421A/ML7421A (dimensions in mm) ENB413GE51 R88 4
Pneumatic Actuators 64 178x (178) E H K E H 7 F F 5 G G 5 Two knockouts are provided for cable fitting: 21.2 (PG13.5) / 22.8 (PG16), 18.9 (PG11) 24 31 326 43 MP953A,C MP953B,D Fig. 5. MP953A,C/MP953B,D (dimensions in mm) model E F G H K MP953A, 5 192 13 MP953C, 5 MP953A, 8 237 21 14 MP953C, 8 165 MP953A, 13 327 343 2 MP953A, 13 255 MP953B 242 17 18 MP953D 137 Fig. 4. ML6421B/ML7421B (dimensions in mm) 5 ENB413GE51 R88
Manufactured for and on behalf of the Environmental and Combustion Controls Division of Honeywell Technologies Sàrl, Ecublens, Route du Bois 37, Switzerland by its Authorized Representative: Automation and Control Solutions Honeywell GmbH Böblinger Strasse 17 7111 Schönaich Germany Phone: (49) 731 6371 Fax: (49) 731 637493 http://ecc.emea.honeywell.com Subject to change without notice. Printed in Germany ENB413GE51 R88